Board: Add Engicam i.MX6 SOMs

PATCH New Jagan Teki 2 participants 11 messages Jun 23, 2017 – Jun 24, 2017 Arm i.MX and Layerscape

lore

Share & tools

lore

Jagan Teki

author

2017-06-23 12:26 UTC #0 lore raw

v5 cover Board: Add Engicam i.MX6 SOMs

From: Jagan Teki <[email protected]>

This version of series support all Engicam SOMs with fixes.

This series add buildroot support for Engicam i.MX6 SOM's
- i.CoreM6 DualLite/Solo
- i.CoreM6 RQS
- GEAM6UL
- Is.IoT MX6UL

Jagan Teki (5):
board: Add support for Engicam i.CoreM6 DualLite/Solo boards
board: Add support for Engicam i.CoreM6 RQS SOM
board: engicam: Add icorem6 for i.CoreM6 support
board: Add support for Engicam GEAM6UL SOM
board: Add support for Engicam Is.IoT MX6UL SOM

 .gitlab-ci.yml                                     |  5 +-
 DEVELOPERS                                         |  5 +-
 board/engicam/geam6ul/genimage.cfg                 | 38 ++++++++++++
 board/engicam/geam6ul/readme.txt                   | 66 +++++++++++++++++++++
 board/engicam/{ => icorem6}/genimage.cfg           |  3 +-
 board/engicam/{ => icorem6}/readme.txt             | 21 ++++---
 board/engicam/icorem6_rqs/genimage.cfg             | 39 ++++++++++++
 board/engicam/icorem6_rqs/readme.txt               | 69 ++++++++++++++++++++++
 board/engicam/isiot/genimage.cfg                   | 38 ++++++++++++
 board/engicam/isiot/readme.txt                     | 66 +++++++++++++++++++++
 ...e_defconfig => engicam_imx6qdl_icore_defconfig} | 12 ++--
 configs/engicam_imx6qdl_icore_rqs_defconfig        | 41 +++++++++++++
 configs/engicam_imx6ul_geam_defconfig              | 41 +++++++++++++
 configs/engicam_imx6ul_isiot_mmc_defconfig         | 41 +++++++++++++
 14 files changed, 467 insertions(+), 18 deletions(-)
 create mode 100644 board/engicam/geam6ul/genimage.cfg
 create mode 100644 board/engicam/geam6ul/readme.txt
 rename board/engicam/{ => icorem6}/genimage.cfg (93%)
 rename board/engicam/{ => icorem6}/readme.txt (72%)
 create mode 100644 board/engicam/icorem6_rqs/genimage.cfg
 create mode 100644 board/engicam/icorem6_rqs/readme.txt
 create mode 100644 board/engicam/isiot/genimage.cfg
 create mode 100644 board/engicam/isiot/readme.txt
 rename configs/{engicam_imx6q_icore_defconfig => engicam_imx6qdl_icore_defconfig} (69%)
 create mode 100644 configs/engicam_imx6qdl_icore_rqs_defconfig
 create mode 100644 configs/engicam_imx6ul_geam_defconfig
 create mode 100644 configs/engicam_imx6ul_isiot_mmc_defconfig

Signature · 1 line

2.7.4

Jagan Teki

author

2017-06-23 12:26 UTC #1 lore raw

PATCH v5 1/5 board: Add support for Engicam i.CoreM6 DualLite/Solo boards

From: Jagan Teki <[email protected]>

Add initial support for Engicam i.CoreM6 DualLite/Solo board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6 variant boards, so this patch update the same along with buildroot defconfig that reflect the common name.

Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt
- Remove exctra " in BR2_LINUX_KERNEL_INTREE_DTS_NAME

 .gitlab-ci.yml                                                 |  2 +-
 DEVELOPERS                                                     |  2 +-
 board/engicam/genimage.cfg                                     |  3 ++-
 board/engicam/readme.txt                                       |  7 +++++--
 ...m_imx6q_icore_defconfig => engicam_imx6qdl_icore_defconfig} | 10 +++++-----
 5 files changed, 14 insertions(+), 10 deletions(-)
 rename configs/{engicam_imx6q_icore_defconfig => engicam_imx6qdl_icore_defconfig} (74%)

.gitlab-ci.yml +1 -1

index 45c9b87..36ef1d1 100644
@@ -89,7 +89,7 @@ ci20_defconfig: *defconfig
 ci40_defconfig: *defconfig
 csky_gx6605s_defconfig: *defconfig
 cubieboard2_defconfig: *defconfig
-engicam_imx6q_icore_defconfig: *defconfig
+engicam_imx6qdl_icore_defconfig: *defconfig
 firefly_rk3288_defconfig: *defconfig
 firefly_rk3288_demo_defconfig: *defconfig
 freescale_imx28evk_defconfig: *defconfig

DEVELOPERS +1 -1

index f86a5dc..9a8b586 100644
@@ -837,7 +837,7 @@ F:	package/keepalived/
 
 N:	Jagan Teki <[email protected]>
 F:	board/engicam/
-F:	configs/engicam_imx6q_icore_defconfig
+F:	configs/engicam_imx6qdl_icore_defconfig
 
 N:	James Knight <[email protected]>
 F:	package/atkmm/

board/engicam/genimage.cfg +2 -1

index 43c81cf..f409a08 100644
@@ -2,10 +2,11 @@ image boot.vfat {
 	vfat {
 		files = {
 			"uImage",
+			"imx6dl-icore.dtb",
 			"imx6q-icore.dtb"
 		}
 	}
-	size = 16M
+	size = 64M
 }
 
 image sdcard.img {

board/engicam/readme.txt +5 -2

index eb7503f..f1010a2 100644
@@ -5,7 +5,7 @@ Buildroot for Engicam i.MX6 SOM platforms:
 This file documents the Buildroot support for all Engicam i.MX6 SOM
 platform boards.
 
-i.CoreM6 Quad/Dual SOM Starter kits:
+i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
 https://www.engicam.com/vis-prod/101120
 
 This configuration uses U-Boot mainline and kernel mainline.

@@ -17,7 +17,7 @@ First, configure Buildroot for the Engicam i.MX SOM's:
 
 - for i.CoreM6 Quad/Dual:
 
-  make engicam_imx6q_icore_defconfig
+  make engicam_imx6qdl_icore_defconfig
 
 Build all components:

@@ -26,6 +26,8 @@ Build all components:
 You will find the following files in output/images/:
 - for i.CoreM6 Quad/Dual:
   - imx6q-icore.dtb
+- for i.CoreM6 DualLite/Solo:
+  - imx6dl-icore.dtb
   - rootfs.ext4
   - rootfs.tar
   - sdcard.img

@@ -46,6 +48,7 @@ directory, ready to be dumped on a SD card. Launch the following
 command as root:
 
   dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+  sync
 
 *** WARNING! This will destroy all the card content. Use with care! ***

configs/engicam_imx6qdl_icore_defconfig renamed from configs/engicam_imx6q_icore_defconfig +5 -5

similarity index 74%
rename from configs/engicam_imx6q_icore_defconfig
rename to configs/engicam_imx6qdl_icore_defconfig
index 63454ee..e0d89fa 100644
@@ -14,8 +14,8 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6q_icore_mmc"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y

@@ -25,15 +25,15 @@ BR2_TARGET_UBOOT_SPL_NAME="SPL"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-icore"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore"
 
 # Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual Starter Kit"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo Starter Kit"
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_GENIMAGE=y

Signature · 1 line

2.7.4

Thomas Petazzoni

Applied

2017-06-24 12:14 UTC #2 lore raw

PATCH v5 1/5 board: Add support for Engicam i.CoreM6 DualLite/Solo boards

Hello,

Quoted 13 lines · Jagan Teki

From: Jagan Teki <[email protected]>
Add initial support for Engicam i.CoreM6 DualLite/Solo board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6 variant boards, so this patch update the same along with buildroot defconfig that reflect the common name.
Signed-off-by Jagan Teki <[email protected]>

Quoted 13 lines

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt
- Remove exctra " in BR2_LINUX_KERNEL_INTREE_DTS_NAME

Applied to master, thanks.

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Jagan Teki

author

2017-06-23 12:26 UTC #3 lore raw

PATCH v5 2/5 board: Add support for Engicam i.CoreM6 RQS SOM

In reply to Jagan Teki

From: Jagan Teki <[email protected]>

Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- none
Changes for v2:
- Fix genimage.cfg path in readme.txt

 .gitlab-ci.yml                              |  1 +
 DEVELOPERS                                  |  1 +
 board/engicam/icorem6_rqs/genimage.cfg      | 39 ++++++++++++++++
 board/engicam/icorem6_rqs/readme.txt        | 69 +++++++++++++++++++++++++++++
 configs/engicam_imx6qdl_icore_rqs_defconfig | 41 +++++++++++++++++
 5 files changed, 151 insertions(+)
 create mode 100644 board/engicam/icorem6_rqs/genimage.cfg
 create mode 100644 board/engicam/icorem6_rqs/readme.txt
 create mode 100644 configs/engicam_imx6qdl_icore_rqs_defconfig

.gitlab-ci.yml +1 -0

index 36ef1d1..f1261d5 100644
@@ -90,6 +90,7 @@ ci40_defconfig: *defconfig
 csky_gx6605s_defconfig: *defconfig
 cubieboard2_defconfig: *defconfig
 engicam_imx6qdl_icore_defconfig: *defconfig
+engicam_imx6qdl_icore_rqs_defconfig: *defconfig
 firefly_rk3288_defconfig: *defconfig
 firefly_rk3288_demo_defconfig: *defconfig
 freescale_imx28evk_defconfig: *defconfig

DEVELOPERS +1 -0

index 9a8b586..ccf6f67 100644
@@ -838,6 +838,7 @@ F:	package/keepalived/
 N:	Jagan Teki <[email protected]>
 F:	board/engicam/
 F:	configs/engicam_imx6qdl_icore_defconfig
+F:	configs/engicam_imx6qdl_icore_rqs_defconfig
 
 N:	James Knight <[email protected]>
 F:	package/atkmm/

board/engicam/icorem6_rqs/genimage.cfg new file +39 -0

new file mode 100644
index 0000000..967d10b
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"uImage",
+			"imx6dl-icore-rqs.dtb",
+			"imx6q-icore-rqs.dtb"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition SPL {
+		in-partition-table = "no"
+		image = "SPL"
+		offset = 1024
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 69K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+	}
+}

board/engicam/icorem6_rqs/readme.txt new file +69 -0

69 lines not on this page · raw message

configs/engicam_imx6qdl_icore_rqs_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 1 line

2.7.4

Thomas Petazzoni

2017-06-24 12:32 UTC #4 lore raw

PATCH v5 2/5 board: Add support for Engicam i.CoreM6 RQS SOM

Hello,

Quoted 9 lines · Jagan Teki

From: Jagan Teki <[email protected]>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by Jagan Teki <[email protected]>

Quoted 12 lines

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- none
Changes for v2:
- Fix genimage.cfg path in readme.txt

Since you're building a FAT filesystem, host-dosfstools and host-mtools are needed, so I've enabled those packages as well. Applied with this change. Thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Jagan Teki

author

2017-06-23 12:26 UTC #5 lore raw

PATCH v5 3/5 board: engicam: Add icorem6 for i.CoreM6 support

In reply to Jagan Teki

From: Jagan Teki <[email protected]>

Create board/engicam/icorem6 for i.CoreM6 supported files. and update the readme.txt so-that it can list i.CoreM6 board details.

Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- none
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt

 board/engicam/{ => icorem6}/genimage.cfg |  0
 board/engicam/{ => icorem6}/readme.txt   | 14 +++++++-------
 configs/engicam_imx6qdl_icore_defconfig  |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)
 rename board/engicam/{ => icorem6}/genimage.cfg (100%)
 rename board/engicam/{ => icorem6}/readme.txt (81%)

board/engicam/icorem6/genimage.cfg renamed from board/engicam/genimage.cfg +0 -0

similarity index 100%
rename from board/engicam/genimage.cfg
rename to board/engicam/icorem6/genimage.cfg

board/engicam/icorem6/readme.txt renamed from board/engicam/readme.txt +7 -7

similarity index 81%
rename from board/engicam/readme.txt
rename to board/engicam/icorem6/readme.txt
index f1010a2..0ad60bf 100644
@@ -1,8 +1,8 @@
-*****************************************
-Buildroot for Engicam i.MX6 SOM platforms:
-*****************************************
+*********************************************
+Buildroot for Engicam i.CoreM6 SOM platforms:
+*********************************************
 
-This file documents the Buildroot support for all Engicam i.MX6 SOM
+This file documents the Buildroot support for Engicam i.CoreM6
 platform boards.
 
 i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:

@@ -13,9 +13,9 @@ This configuration uses U-Boot mainline and kernel mainline.
 Build
 =====
 
-First, configure Buildroot for the Engicam i.MX SOM's:
+First, configure Buildroot for the Engicam i.CoreM6:
 
-- for i.CoreM6 Quad/Dual:
+- for i.CoreM6 Quad/Dual/DualLite/Solo:
 
   make engicam_imx6qdl_icore_defconfig

@@ -53,7 +53,7 @@ command as root:
 *** WARNING! This will destroy all the card content. Use with care! ***
 
 For details about the medium image layout, see the definition in
-board/engicam/genimage.cfg
+board/engicam/icorem6/genimage.cfg
 
 Boot the i.CoreM6 boards with SD boot:
 =====================================

configs/engicam_imx6qdl_icore_defconfig +1 -1

index e0d89fa..8c914b0 100644
@@ -38,4 +38,4 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/genimage.cfg"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"

Signature · 1 line

2.7.4

Thomas Petazzoni

Applied

2017-06-24 12:53 UTC #6 lore raw

PATCH v5 3/5 board: engicam: Add icorem6 for i.CoreM6 support

Hello,

Quoted 7 lines · Jagan Teki

From: Jagan Teki <[email protected]>
Create board/engicam/icorem6 for i.CoreM6 supported files. and update the readme.txt so-that it can list i.CoreM6 board details.
Signed-off-by Jagan Teki <[email protected]>

Quoted 9 lines

---
Changes for v5:
- none
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt

Applied to master, thanks.

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Jagan Teki

author

2017-06-23 12:26 UTC #7 lore raw

PATCH v5 4/5 board: Add support for Engicam GEAM6UL SOM

In reply to Jagan Teki

From: Jagan Teki <[email protected]>

Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
- Fix readme.txt file
Changes for v2:
- Fix genimage.cfg path in readme.txt

 .gitlab-ci.yml                        |  1 +
 DEVELOPERS                            |  1 +
 board/engicam/geam6ul/genimage.cfg    | 38 ++++++++++++++++++++
 board/engicam/geam6ul/readme.txt      | 66 +++++++++++++++++++++++++++++++++++
 configs/engicam_imx6ul_geam_defconfig | 41 ++++++++++++++++++++++
 5 files changed, 147 insertions(+)
 create mode 100644 board/engicam/geam6ul/genimage.cfg
 create mode 100644 board/engicam/geam6ul/readme.txt
 create mode 100644 configs/engicam_imx6ul_geam_defconfig

.gitlab-ci.yml +1 -0

index f1261d5..41abfd0 100644
@@ -91,6 +91,7 @@ csky_gx6605s_defconfig: *defconfig
 cubieboard2_defconfig: *defconfig
 engicam_imx6qdl_icore_defconfig: *defconfig
 engicam_imx6qdl_icore_rqs_defconfig: *defconfig
+engicam_imx6ul_geam_defconfig: *defconfig
 firefly_rk3288_defconfig: *defconfig
 firefly_rk3288_demo_defconfig: *defconfig
 freescale_imx28evk_defconfig: *defconfig

DEVELOPERS +1 -0

index ccf6f67..00ec245 100644
@@ -839,6 +839,7 @@ N:	Jagan Teki <[email protected]>
 F:	board/engicam/
 F:	configs/engicam_imx6qdl_icore_defconfig
 F:	configs/engicam_imx6qdl_icore_rqs_defconfig
+F:	configs/engicam_imx6ul_geam_defconfig
 
 N:	James Knight <[email protected]>
 F:	package/atkmm/

board/engicam/geam6ul/genimage.cfg new file +38 -0

new file mode 100644
index 0000000..fcca6e1
@@ -0,0 +1,38 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"uImage",
+			"imx6ul-geam-kit.dtb"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition SPL {
+		in-partition-table = "no"
+		image = "SPL"
+		offset = 1024
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 69K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+	}
+}

board/engicam/geam6ul/readme.txt new file +66 -0

66 lines not on this page · raw message

configs/engicam_imx6ul_geam_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 1 line

2.7.4

Thomas Petazzoni

2017-06-24 12:54 UTC #8 lore raw

PATCH v5 4/5 board: Add support for Engicam GEAM6UL SOM

Hello,

Quoted 9 lines · Jagan Teki

From: Jagan Teki <[email protected]>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by Jagan Teki <[email protected]>

Quoted 13 lines

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Use kernel version 4.11.5
- Fix readme.txt file
Changes for v2:
- Fix genimage.cfg path in readme.txt

Here as well, host-dosfstools and host-mtools were missing, so I've added them. Patch applied. Thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Jagan Teki

author

2017-06-23 12:26 UTC #9 lore raw

PATCH v5 5/5 board: Add support for Engicam Is.IoT MX6UL SOM

In reply to Jagan Teki

From: Jagan Teki <[email protected]>

Add initial support for Engicam Is.IoT MX6UL SOM board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot

Signed-off-by Jagan Teki <[email protected]>

 .gitlab-ci.yml                             |  1 +
 DEVELOPERS                                 |  1 +
 board/engicam/isiot/genimage.cfg           | 38 +++++++++++++++++
 board/engicam/isiot/readme.txt             | 66 ++++++++++++++++++++++++++++++
 configs/engicam_imx6ul_isiot_mmc_defconfig | 41 +++++++++++++++++++
 5 files changed, 147 insertions(+)
 create mode 100644 board/engicam/isiot/genimage.cfg
 create mode 100644 board/engicam/isiot/readme.txt
 create mode 100644 configs/engicam_imx6ul_isiot_mmc_defconfig

.gitlab-ci.yml +1 -0

index 41abfd0..33c0fab 100644
@@ -92,6 +92,7 @@ cubieboard2_defconfig: *defconfig
 engicam_imx6qdl_icore_defconfig: *defconfig
 engicam_imx6qdl_icore_rqs_defconfig: *defconfig
 engicam_imx6ul_geam_defconfig: *defconfig
+engicam_imx6ul_isiot_defconfig: *defconfig
 firefly_rk3288_defconfig: *defconfig
 firefly_rk3288_demo_defconfig: *defconfig
 freescale_imx28evk_defconfig: *defconfig

DEVELOPERS +1 -0

index 00ec245..7699354 100644
@@ -840,6 +840,7 @@ F:	board/engicam/
 F:	configs/engicam_imx6qdl_icore_defconfig
 F:	configs/engicam_imx6qdl_icore_rqs_defconfig
 F:	configs/engicam_imx6ul_geam_defconfig
+F:	configs/engicam_imx6ul_isiot_defconfig
 
 N:	James Knight <[email protected]>
 F:	package/atkmm/

board/engicam/isiot/genimage.cfg new file +38 -0

new file mode 100644
index 0000000..dc8c20d
@@ -0,0 +1,38 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"uImage",
+			"imx6ul-isiot-emmc.dtb"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition SPL {
+		in-partition-table = "no"
+		image = "SPL"
+		offset = 1024
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 69K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+	}
+}

board/engicam/isiot/readme.txt new file +66 -0

66 lines not on this page · raw message

configs/engicam_imx6ul_isiot_mmc_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 1 line

2.7.4

Thomas Petazzoni

Applied

2017-06-24 12:56 UTC #10 lore raw

PATCH v5 5/5 board: Add support for Engicam Is.IoT MX6UL SOM

Hello,

Quoted 9 lines · Jagan Teki

From: Jagan Teki <[email protected]>
Add initial support for Engicam Is.IoT MX6UL SOM board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by Jagan Teki <[email protected]>

Quoted 10 lines

---
Changes for v5:
- Drop _mmc in defconfig
- Update size of vfat partition
- Add sync command after writing mmc
- Update .gitlab-ci.yml
Changes for v4:
- Update .gitlab-ci.yml
Changes for v3:
- Newly added patch

Applied to master, after adding host-dosfstools/host-mtools. Thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com