Skip to contentSkip to conversation

ARM: dts: sun4i: Add A10 LCD0 RGB888 pins

PATCH New Jonathan Liu 1 participant 1 message Jun 26, 2017

Subsystems (2)
Device tree bindings Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

Jonathan Liu

author
#0 lore raw

PATCH 1/1 ARM: dts: sun4i: Add A10 LCD0 RGB888 pins

The LCD0 controller on the A10 can do RGB output up to 8 bits per channel. Add the pins for RGB888 output.

Signed-off-by Jonathan Liu <[email protected]>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/boot/dts/sun4i-a10.dtsi +11 -0
index b63668ece151..6fa2622a78c2 100644
@@ -1022,6 +1022,17 @@
 				function = "ir1";
 			};
 
+			lcd0_rgb888_pins: lcd0_rgb888@0 {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
Signature · 1 line
2.13.1