Skip to contentSkip to conversation

ASoC: rt5645: Add quirk override by module option

PATCH In review Takashi Iwai 3 participants 3 messages Jun 29, 2017 – Jun 30, 2017

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: rt5645: Add quirk override by module option

For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully.

---
 sound/soc/codecs/rt5645.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
sound/soc/codecs/rt5645.c +20 -0
index 308c22f5909a..22771e6ab3fa 100644
@@ -34,6 +34,17 @@
 #include "rl6231.h"
 #include "rt5645.h"
 
+#define QUIRK_INV_JD1_1(q)	((q) & 1)
+#define QUIRK_LEVEL_IRQ(q)	(((q) >> 1) & 1)
+#define QUIRK_IN2_DIFF(q)	(((q) >> 2) & 1)
+#define QUIRK_JD_MODE(q)	(((q) >> 4) & 7)
+#define QUIRK_DMIC1_DATA_PIN(q)	(((q) >> 8) & 3)
+#define QUIRK_DMIC2_DATA_PIN(q)	(((q) >> 12) & 3)
+
+static unsigned int quirk = -1;
+module_param(quirk, uint, 0444);
+MODULE_PARM_DESC(quirk, "RT5645 pdata quirk override");
+
 #define RT5645_DEVICE_ID 0x6308
 #define RT5650_DEVICE_ID 0x6419
 
@@ -3679,6 +3690,15 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 	else if (dmi_check_system(dmi_platform_gpd_win))
 		rt5645->pdata = gpd_win_platform_data;
 
+	if (quirk != -1) {
+		rt5645->pdata.in2_diff = QUIRK_IN2_DIFF(quirk);
+		rt5645->pdata.level_trigger_irq = QUIRK_LEVEL_IRQ(quirk);
+		rt5645->pdata.inv_jd1_1 = QUIRK_INV_JD1_1(quirk);
+		rt5645->pdata.jd_mode = QUIRK_JD_MODE(quirk);
+		rt5645->pdata.dmic1_data_pin = QUIRK_DMIC1_DATA_PIN(quirk);
+		rt5645->pdata.dmic2_data_pin = QUIRK_DMIC2_DATA_PIN(quirk);
+	}
+
 	rt5645->gpiod_hp_det = devm_gpiod_get_optional(&i2c->dev, "hp-detect",
 						       GPIOD_IN);
 
Signature · 1 line
2.13.2
Tested-by on v1 1/1
#1 lore raw
Quoted 7 lines · Takashi Iwai

For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully.

Now I've a working internal digital microphone, using snd_soc_rt5645.quirk=0x1031

Signature · 2 lines
James Cameron
http://quozl.netrek.org/
maintainer
#2 lore raw

Applied "ASoC: rt5645: Add quirk override by module option" to the asoc tree

In reply to Takashi Iwai

The patch

ASoC: rt5645: Add quirk override by module option

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 4999b0214b05a08b42bbafcb29a0b9c413002d3f Mon Sep 17 00:00:00 2001

From: Takashi Iwai <[email protected]>
Date: Thu, 29 Jun 2017 18:08:33 +0200
Subject: [PATCH] ASoC: rt5645: Add quirk override by module option

For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully.

---
 sound/soc/codecs/rt5645.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
sound/soc/codecs/rt5645.c +20 -0
index 630374ee692a..909f4a6aaef1 100644
@@ -34,6 +34,17 @@
 #include "rl6231.h"
 #include "rt5645.h"
 
+#define QUIRK_INV_JD1_1(q)	((q) & 1)
+#define QUIRK_LEVEL_IRQ(q)	(((q) >> 1) & 1)
+#define QUIRK_IN2_DIFF(q)	(((q) >> 2) & 1)
+#define QUIRK_JD_MODE(q)	(((q) >> 4) & 7)
+#define QUIRK_DMIC1_DATA_PIN(q)	(((q) >> 8) & 3)
+#define QUIRK_DMIC2_DATA_PIN(q)	(((q) >> 12) & 3)
+
+static unsigned int quirk = -1;
+module_param(quirk, uint, 0444);
+MODULE_PARM_DESC(quirk, "RT5645 pdata quirk override");
+
 #define RT5645_DEVICE_ID 0x6308
 #define RT5650_DEVICE_ID 0x6419
 
@@ -3679,6 +3690,15 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 	else if (dmi_check_system(dmi_platform_gpd_win))
 		rt5645->pdata = gpd_win_platform_data;
 
+	if (quirk != -1) {
+		rt5645->pdata.in2_diff = QUIRK_IN2_DIFF(quirk);
+		rt5645->pdata.level_trigger_irq = QUIRK_LEVEL_IRQ(quirk);
+		rt5645->pdata.inv_jd1_1 = QUIRK_INV_JD1_1(quirk);
+		rt5645->pdata.jd_mode = QUIRK_JD_MODE(quirk);
+		rt5645->pdata.dmic1_data_pin = QUIRK_DMIC1_DATA_PIN(quirk);
+		rt5645->pdata.dmic2_data_pin = QUIRK_DMIC2_DATA_PIN(quirk);
+	}
+
 	rt5645->gpiod_hp_det = devm_gpiod_get_optional(&i2c->dev, "hp-detect",
 						       GPIOD_IN);
 
Signature · 1 line
2.13.2