make io{read|write}64 more globally usable
Subsystems (6)
v3 cover make io{read|write}64 more globally usable
Hi,
Here's my third attempt. This time we add functions to io-64-nonatomic-* which call io{read|write}32 twice so that the pio is done correctly.
I've also included a patch that adds these functions to the generic iomap library so that readq/writeq can be used while still splitting pio operations (when appropriate).
Thanks,
Logan
Horia Geantă (1):
crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
Logan Gunthorpe (3):
iomap: introduce io{read|write}64_{lo_hi|hi_lo}
io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
drivers/crypto/caam/regs.h | 35 ++------- drivers/ntb/hw/intel/ntb_hw_intel.c | 31 +------- include/asm-generic/iomap.h | 26 +++++-- include/linux/io-64-nonatomic-hi-lo.h | 62 ++++++++++++++++ include/linux/io-64-nonatomic-lo-hi.h | 60 ++++++++++++++++ lib/iomap.c | 132 ++++++++++++++++++++++++++++++++++ 6 files changed, 280 insertions(+), 66 deletions(-)
--
2.11.0
PATCH v3 1/4 iomap: introduce io{read|write}64_{lo_hi|hi_lo}
In order to provide non-atomic functions for io{read|write}64 that will use readq and writeq when appropriate. We define a number of variants of these functions in the generic iomap that will do non-atomic operations on pio but atomic operations on mmio.
These functions are only defined if readq and writeq are defined. If they are not, then the wrappers that always use non-atomic operations from include/linux/io-64-nonatomic*.h will be used.
--- include/asm-generic/iomap.h | 26 +++++++-- lib/iomap.c | 132 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 152 insertions(+), 6 deletions(-)
include/asm-generic/iomap.h +20 -6
@@ -30,9 +30,16 @@ extern unsigned int ioread16(void __iomem *);extern unsigned int ioread16be (void __iomem *);extern unsigned int ioread32 (void __iomem *);extern unsigned int ioread32be (void __iomem *); -#ifdef CONFIG_64BIT -extern u64 ioread64 (void __iomem *); -extern u64 ioread64be (void __iomem *); + +#ifdef readq +#define ioread64_lo_hi ioread64_lo_hi +#define ioread64_hi_lo ioread64_hi_lo +#define ioread64be_lo_hi ioread64be_lo_hi +#define ioread64be_hi_lo ioread64be_hi_lo +extern u64 ioread64_lo_hi (void __iomem *addr); +extern u64 ioread64_hi_lo (void __iomem *addr); +extern u64 ioread64be_lo_hi (void __iomem *addr); +extern u64 ioread64be_hi_lo (void __iomem *addr);#endif extern void iowrite8 (u8 ,void __iomem *);
@@ -40,9 +47,16 @@ extern void iowrite16(u16, void __iomem *);extern void iowrite16be (u16 ,void __iomem *);extern void iowrite32 (u32 ,void __iomem *);extern void iowrite32be (u32 ,void __iomem *); -#ifdef CONFIG_64BIT -extern void iowrite64 (u64 ,void __iomem *); -extern void iowrite64be (u64 ,void __iomem *); + +#ifdef writeq +#define iowrite64_lo_hi iowrite64_lo_hi +#define iowrite64_hi_lo iowrite64_hi_lo +#define iowrite64be_lo_hi iowrite64be_lo_hi +#define iowrite64be_hi_lo iowrite64be_hi_lo +void iowrite64_lo_hi (u64 val,void __iomem *addr); +void iowrite64_hi_lo (u64 val,void __iomem *addr); +void iowrite64be_lo_hi (u64 val,void __iomem *addr); +void iowrite64be_hi_lo (u64 val,void __iomem *addr);#endif /*
lib/iomap.c +132 -0
156 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH v3 2/4 io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
In reply to Logan GunthorpeThis patch adds generic io{read|write}64[be]{_lo_hi|_hi_lo} macros if they are not already defined by the architecture. (As they are provided by the generic iomap library).
The patch also points io{read|write}64[be] to the variant specified by the header name.
This is because new drivers are encouraged to use ioreadXX, et al instead of readX[1], et al -- and mixing ioreadXX with readq is pretty ugly.
[1] ldd3: section 9.4.2
squash! io-64-nonatomic: add io{read|write}64[be] macros
--- include/linux/io-64-nonatomic-hi-lo.h | 62 +++++++++++++++++++++++++++++++++++ include/linux/io-64-nonatomic-lo-hi.h | 60 +++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+)
include/linux/io-64-nonatomic-hi-lo.h +62 -0
@@ -54,4 +54,66 @@ static inline void hi_lo_writeq_relaxed(__u64 val, volatile void __iomem *addr)#define writeq_relaxed hi_lo_writeq_relaxed#endif +#ifndef ioread64_hi_lo +#define ioread64_hi_lo ioread64_hi_lo +static inline u64 ioread64_hi_lo (void __iomem *addr) +{ +const u32 __iomem *p = addr; +u32 low, high; + + high =ioread32 (p +1 ); + low =ioread32 (p); + +return low + ((u64 )high <<32 ); +} +#endif + +#ifndef iowrite64_hi_lo +#define iowrite64_hi_lo iowrite64_hi_lo +static inline void iowrite64_hi_lo (u64 val,void __iomem *addr) +{ +iowrite32 (val >>32 , addr +sizeof (u32)); +iowrite32 (val, addr); +} +#endif + +#ifndef ioread64be_hi_lo +#define ioread64be_hi_lo ioread64be_hi_lo +static inline u64 ioread64be_hi_lo (void __iomem *addr) +{ +const u32 __iomem *p = addr; +u32 low, high; + + high =ioread32be (p); + low =ioread32be (p +1 ); + +return low + ((u64 )high <<32 ); +} +#endif + +#ifndef iowrite64be_hi_lo +#define iowrite64be_hi_lo iowrite64be_hi_lo +static inline void iowrite64be_hi_lo (u64 val,void __iomem *addr) +{ +iowrite32be (val >>32 , addr); +iowrite32be (val, addr +sizeof (u32)); +} +#endif + +#ifndef ioread64 +#define ioread64 ioread64_hi_lo +#endif + +#ifndef iowrite64 +#define iowrite64 iowrite64_hi_lo +#endif + +#ifndef ioread64be +#define ioread64be (p) ioread64be_hi_lo +#endif + +#ifndef iowrite64be +#define iowrite64be (v, p) iowrite64be_hi_lo +#endif +#endif /* _LINUX_IO_64_NONATOMIC_HI_LO_H_ */
include/linux/io-64-nonatomic-lo-hi.h +60 -0
64 lines not on this page · raw message
Signature · 1 line
2.11.0
PATCH v3 3/4 ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
In reply to Logan GunthorpeNow that ioread64 and iowrite64 are available in io-64-nonatomic, we can remove the hack at the top of ntb_hw_intel.c and replace it with an include.
--- drivers/ntb/hw/intel/ntb_hw_intel.c | 31 +------------------------------ 1 file changed, 1 insertion(+), 30 deletions(-)
drivers/ntb/hw/intel/ntb_hw_intel.c +1 -30
@@ -57,6 +57,7 @@#include <linux/random.h> #include <linux/slab.h> #include <linux/ntb.h> +#include <linux/io-64-nonatomic-lo-hi.h> #include "ntb_hw_intel.h"
@@ -153,35 +154,6 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32,static inline enum ntb_topo xeon_ppd_topo (struct intel_ntb_dev *ndev,u8 ppd);static int xeon_init_isr (struct intel_ntb_dev *ndev); -#ifndef ioread64 -#ifdef readq -#define ioread64 readq -#else -#define ioread64 _ioread64 -static inline u64 _ioread64 (void __iomem *mmio) -{ -u64 low, high; - - low =ioread32 (mmio); - high =ioread32 (mmio +sizeof (u32)); -return low | (high <<32 ); -} -#endif -#endif - -#ifndef iowrite64 -#ifdef writeq -#define iowrite64 writeq -#else -#define iowrite64 _iowrite64 -static inline void _iowrite64 (u64 val,void __iomem *mmio) -{ -iowrite32 (val, mmio); -iowrite32 (val >>32 , mmio +sizeof (u32)); -} -#endif -#endif -static inline int pdev_is_atom (struct pci_dev *pdev) {switch (pdev->device) {
@@ -3008,4 +2980,3 @@ static void __exit intel_ntb_pci_driver_exit(void)debugfs_remove_recursive (debugfs_dir); }module_exit (intel_ntb_pci_driver_exit); -
Signature · 1 line
2.11.0
PATCH v3 4/4 crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
In reply to Logan GunthorpeFrom: Horia Geantă <[email protected]>
We can now make use of the io-64-nonatomic-hi-lo header to always provide 64 bit IO operations. So this patch cleans up the extra CONFIG_64BIT ifdefs.
To be consistent with CAAM engine HW spec: in case of 64-bit registers, irrespective of device endianness, the lower address should be read from / written to first, followed by the upper address. Indeed the I/O accessors in CAAM driver currently don't follow the spec, however this is a good opportunity to fix the code.
--- drivers/crypto/caam/regs.h | 35 +++++------------------------------ 1 file changed, 5 insertions(+), 30 deletions(-)
drivers/crypto/caam/regs.h +5 -30
@@ -9,7 +9,7 @@#include <linux/types.h> #include <linux/bitops.h> -#include <linux/io.h> +#include <linux/io-64-nonatomic-lo-hi.h> /* * Architecture-specific register access methods
@@ -134,50 +134,25 @@ static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set)* base + 0x0000 : least-significant 32 bits * base + 0x0004 : most-significant 32 bits */ -#ifdef CONFIG_64BIT static inline void wr_reg64 (void __iomem *reg,u64 data) { +#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX if (caam_little_end)iowrite64 (data, reg); else -iowrite64be (data, reg); -} - -static inline u64 rd_reg64 (void __iomem *reg) -{ -if (caam_little_end) -return ioread64 (reg); -else -return ioread64be (reg); -} - -#else /* CONFIG_64BIT */ -static inline void wr_reg64 (void __iomem *reg,u64 data) -{ -#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX -if (caam_little_end) { -wr_reg32 ((u32 __iomem *)(reg) +1 , data >>32 ); -wr_reg32 ((u32 __iomem *)(reg), data); - } else#endif - { -wr_reg32 ((u32 __iomem *)(reg), data >>32 ); -wr_reg32 ((u32 __iomem *)(reg) +1 , data); - } +iowrite64be (data, reg); }static inline u64 rd_reg64 (void __iomem *reg) {#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX if (caam_little_end) -return ((u64 )rd_reg32 ((u32 __iomem *)(reg) +1 ) <<32 | - (u64 )rd_reg32 ((u32 __iomem *)(reg))); +return ioread64 (reg); else#endif -return ((u64 )rd_reg32 ((u32 __iomem *)(reg)) <<32 | - (u64 )rd_reg32 ((u32 __iomem *)(reg) +1 )); +return ioread64be (reg); } -#endif /* CONFIG_64BIT */ #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT #ifdef CONFIG_SOC_IMX7D
Signature · 1 line
2.11.0
Horia Geantă
maintainerRe: [PATCH v3 4/4] crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
Quoted 3 lines · Logan Gunthorpe
From: Horia Geantă <[email protected]>
We can now make use of the io-64-nonatomic-hi-lo header to always
Typo: we are using io-64-nonatomic-lo-hi, not hi-lo.
Thanks,
Horia
Re: [PATCH v3 4/4] crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
Quoted 5 lines · Horia Geantă
Quoted 3 lines · Logan Gunthorpe
From: Horia Geantă <[email protected]>
We can now make use of the io-64-nonatomic-hi-lo header to always
Typo: we are using io-64-nonatomic-lo-hi, not hi-lo.
Yup, thanks. I will fix this for a v4. I've also noticed a couple other mistakes I need to fix.
Logan