Skip to contentSkip to conversation

Introduce USB charger support in USB phy

PATCH Superseded Baolin Wang 3 participants 9 messages Jul 3, 2017 – Jul 18, 2017

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover Introduce USB charger support in USB phy

Currently the Linux kernel does not provide any standard integration of this feature that integrates the USB subsystem with the system power regulation provided by PMICs meaning that either vendors must add this in their kernels or USB gadget devices based on Linux (such as mobile phones) may not behave as they should. Thus provide a standard USB charger support in USB phy core for doing this in kernel.

Now introduce one user with wm831x_power to support and test the usb charger.

Changes since v1:
- Fix building errors.

Baolin Wang (3):
include: uapi: usb: Introduce USB charger type and state definition
usb: phy: Add USB charger support
power: wm831x_power: Support USB charger current limit management

 drivers/power/supply/wm831x_power.c |   61 ++++++++
 drivers/usb/phy/phy.c               |  265 +++++++++++++++++++++++++++++++++++
 include/linux/usb/phy.h             |   49 +++++++
 include/uapi/linux/usb/charger.h    |   31 ++++
 4 files changed, 406 insertions(+)
 create mode 100644 include/uapi/linux/usb/charger.h
Signature · 6 lines
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

PATCH v2 1/3 include: uapi: usb: Introduce USB charger type and state definition

Introducing USB charger type and state definition can help to support USB charging which will be added in USB phy core.

---
 include/uapi/linux/usb/charger.h |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 include/uapi/linux/usb/charger.h
include/uapi/linux/usb/charger.h new file +31 -0
new file mode 100644
index 0000000..5f72af3
@@ -0,0 +1,31 @@
+/*
+ * This file defines the USB charger type and state that are needed for
+ * USB device APIs.
+ */
+
+#ifndef _UAPI__LINUX_USB_CHARGER_H
+#define _UAPI__LINUX_USB_CHARGER_H
+
+/*
+ * USB charger type:
+ * SDP (Standard Downstream Port)
+ * DCP (Dedicated Charging Port)
+ * CDP (Charging Downstream Port)
+ * ACA (Accessory Charger Adapters)
+ */
+enum usb_charger_type {
+	UNKNOWN_TYPE,
+	SDP_TYPE,
+	DCP_TYPE,
+	CDP_TYPE,
+	ACA_TYPE,
+};
+
+/* USB charger state */
+enum usb_charger_state {
+	USB_CHARGER_DEFAULT,
+	USB_CHARGER_PRESENT,
+	USB_CHARGER_ABSENT,
+};
+
+#endif /* _UAPI__LINUX_USB_CHARGER_H */
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v2 2/3 usb: phy: Add USB charger support

In reply to Baolin Wang

This patch introduces the usb charger support based on usb phy that makes an enhancement to a power driver. The basic conception of the usb charger is that, when one usb charger is added or removed by reporting from the extcon device state change, the usb charger will report to power user to set the current limitation.

Power user can register a notifiee on the usb phy by issuing usb_register_notifier() to get notified by charger status changes or charger current changes.

we can notify what current to be drawn to power user according to different charger type, and now we have 2 methods to get charger type. One is get charger type from extcon subsystem, which also means the charger state changes. Another is we can get the charger type from USB controller detecting or PMIC detecting, and the charger state changes should be told by issuing usb_phy_set_charger_state().

---
 drivers/usb/phy/phy.c   |  265 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/usb/phy.h |   49 +++++++++
 2 files changed, 314 insertions(+)
drivers/usb/phy/phy.c +265 -0
index 032f5af..db72802 100644
@@ -18,6 +18,18 @@
 
 #include <linux/usb/phy.h>
 
+/* Default current range by charger type. */
+#define DEFAULT_SDP_CUR_MIN	2
+#define DEFAULT_SDP_CUR_MAX	500
+#define DEFAULT_SDP_CUR_MIN_SS	150
+#define DEFAULT_SDP_CUR_MAX_SS	900
+#define DEFAULT_DCP_CUR_MIN	500
+#define DEFAULT_DCP_CUR_MAX	5000
+#define DEFAULT_CDP_CUR_MIN	1500
+#define DEFAULT_CDP_CUR_MAX	5000
+#define DEFAULT_ACA_CUR_MIN	1500
+#define DEFAULT_ACA_CUR_MAX	5000
+
 static LIST_HEAD(phy_list);
 static LIST_HEAD(phy_bind_list);
 static DEFINE_SPINLOCK(phy_lock);
@@ -77,6 +89,216 @@ static struct usb_phy *__of_usb_find_phy(struct device_node *node)
 	return ERR_PTR(-EPROBE_DEFER);
 }
 
+static void usb_phy_set_default_current(struct usb_phy *usb_phy)
+{
+	usb_phy->chg_cur.sdp_min = DEFAULT_SDP_CUR_MIN;
+	usb_phy->chg_cur.sdp_max = DEFAULT_SDP_CUR_MAX;
+	usb_phy->chg_cur.dcp_min = DEFAULT_DCP_CUR_MIN;
+	usb_phy->chg_cur.dcp_max = DEFAULT_DCP_CUR_MAX;
+	usb_phy->chg_cur.cdp_min = DEFAULT_CDP_CUR_MIN;
+	usb_phy->chg_cur.cdp_max = DEFAULT_CDP_CUR_MAX;
+	usb_phy->chg_cur.aca_min = DEFAULT_ACA_CUR_MIN;
+	usb_phy->chg_cur.aca_max = DEFAULT_ACA_CUR_MAX;
+}
+
+/**
+ * usb_phy_notify_charger_work - notify the USB charger state
+ * @work - the charger work to notify the USB charger state
+ *
+ * This work can be issued when USB charger state has been changed or
+ * USB charger current has been changed, then we can notify the current
+ * what can be drawn to power user and the charger state to userspace.
+ *
+ * If we get the charger type from extcon subsystem, we can notify the
+ * charger state to power user automatically by usb_phy_get_charger_type()
+ * issuing from extcon subsystem.
+ *
+ * If we get the charger type from ->charger_detect() instead of extcon
+ * subsystem, the usb phy driver should issue usb_phy_set_charger_state()
+ * to set charger state when the charger state has been changed.
+ */
+static void usb_phy_notify_charger_work(struct work_struct *work)
+{
+	struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work);
+	char uchger_state[50] = { 0 };
+	char *envp[] = { uchger_state, NULL };
+	unsigned int min, max;
+
+	switch (usb_phy->chg_state) {
+	case USB_CHARGER_PRESENT:
+		usb_phy_get_charger_current(usb_phy, &min, &max);
+
+		atomic_notifier_call_chain(&usb_phy->notifier, max, usb_phy);
+		snprintf(uchger_state, ARRAY_SIZE(uchger_state),
+			 "USB_CHARGER_STATE=%s", "USB_CHARGER_PRESENT");
+		break;
+	case USB_CHARGER_ABSENT:
+		usb_phy_set_default_current(usb_phy);
+
+		atomic_notifier_call_chain(&usb_phy->notifier, 0, usb_phy);
+		snprintf(uchger_state, ARRAY_SIZE(uchger_state),
+			 "USB_CHARGER_STATE=%s", "USB_CHARGER_ABSENT");
+		break;
+	default:
+		dev_warn(usb_phy->dev, "Unknown USB charger state: %d\n",
+			 usb_phy->chg_state);
+		return;
+	}
+
+	kobject_uevent_env(&usb_phy->dev->kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * usb_phy_get_charger_type - get charger type from extcon subsystem
+ * @nb -the notifier block to determine charger type
+ * @state - the cable state
+ * @data - private data
+ *
+ * Determin the charger type from extcon subsystem which also means the
+ * charger state has been chaned, then we should notify this event.
+ */
+static int usb_phy_get_charger_type(struct notifier_block *nb,
+				    unsigned long state, void *data)
+{
+	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, type_nb);
+
+	if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_SDP) > 0) {
+		usb_phy->chg_type = SDP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_CDP) > 0) {
+		usb_phy->chg_type = CDP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_DCP) > 0) {
+		usb_phy->chg_type = DCP_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else if (extcon_get_state(usb_phy->edev, EXTCON_CHG_USB_ACA) > 0) {
+		usb_phy->chg_type = ACA_TYPE;
+		usb_phy->chg_state = USB_CHARGER_PRESENT;
+	} else {
+		usb_phy->chg_type = UNKNOWN_TYPE;
+		usb_phy->chg_state = USB_CHARGER_ABSENT;
+	}
+
+	schedule_work(&usb_phy->chg_work);
+	return NOTIFY_OK;
+}
+
+/**
+ * usb_phy_set_charger_current - set the USB charger current
+ * @usb_phy - the USB phy to be used
+ * @mA - the current need to be set
+ *
+ * Usually we only change the charger default current when USB finished the
+ * enumeration as one SDP charger. As one SDP charger, usb_phy_set_power()
+ * will issue this function to change charger current when after setting USB
+ * configuration, or suspend/resume USB. For other type charger, we should
+ * use the default charger current and we do not suggest to issue this function
+ * to change the charger current.
+ *
+ * When USB charger current has been changed, we need to notify the power users.
+ */
+void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA)
+{
+	switch (usb_phy->chg_type) {
+	case SDP_TYPE:
+		if (usb_phy->chg_cur.sdp_max == mA)
+			return;
+
+		usb_phy->chg_cur.sdp_max = (mA > DEFAULT_SDP_CUR_MAX_SS) ?
+			DEFAULT_SDP_CUR_MAX_SS : mA;
+		break;
+	case DCP_TYPE:
+		if (usb_phy->chg_cur.dcp_max == mA)
+			return;
+
+		usb_phy->chg_cur.dcp_max = (mA > DEFAULT_DCP_CUR_MAX) ?
+			DEFAULT_DCP_CUR_MAX : mA;
+		break;
+	case CDP_TYPE:
+		if (usb_phy->chg_cur.cdp_max == mA)
+			return;
+
+		usb_phy->chg_cur.cdp_max = (mA > DEFAULT_CDP_CUR_MAX) ?
+			DEFAULT_CDP_CUR_MAX : mA;
+		break;
+	case ACA_TYPE:
+		if (usb_phy->chg_cur.aca_max == mA)
+			return;
+
+		usb_phy->chg_cur.aca_max = (mA > DEFAULT_ACA_CUR_MAX) ?
+			DEFAULT_ACA_CUR_MAX : mA;
+		break;
+	default:
+		return;
+	}
+
+	schedule_work(&usb_phy->chg_work);
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_charger_current);
+
+/**
+ * usb_phy_get_charger_current - get the USB charger current
+ * @usb_phy - the USB phy to be used
+ * @min - the minimum current
+ * @max - the maximum current
+ *
+ * Usually we will notify the maximum current to power user, but for some
+ * special case, power user also need the minimum current value. Then the
+ * power user can issue this function to get the suitable current.
+ */
+void usb_phy_get_charger_current(struct usb_phy *usb_phy,
+				 unsigned int *min, unsigned int *max)
+{
+	switch (usb_phy->chg_type) {
+	case SDP_TYPE:
+		*min = usb_phy->chg_cur.sdp_min;
+		*max = usb_phy->chg_cur.sdp_max;
+		break;
+	case DCP_TYPE:
+		*min = usb_phy->chg_cur.dcp_min;
+		*max = usb_phy->chg_cur.dcp_max;
+		break;
+	case CDP_TYPE:
+		*min = usb_phy->chg_cur.cdp_min;
+		*max = usb_phy->chg_cur.cdp_max;
+		break;
+	case ACA_TYPE:
+		*min = usb_phy->chg_cur.aca_min;
+		*max = usb_phy->chg_cur.aca_max;
+		break;
+	default:
+		*min = 0;
+		*max = 0;
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_phy_get_charger_current);
+
+/**
+ * usb_phy_set_charger_state - set the USB charger state
+ * @usb_phy - the USB phy to be used
+ * @state - the new state need to be set for charger
+ *
+ * The usb phy driver can issue this function when the usb phy driver
+ * detected the charger state has been changed, in this case the charger
+ * type should be get from ->charger_detect().
+ */
+void usb_phy_set_charger_state(struct usb_phy *usb_phy,
+			       enum usb_charger_state state)
+{
+	if (usb_phy->chg_state == state || !usb_phy->charger_detect)
+		return;
+
+	usb_phy->chg_state = state;
+	if (usb_phy->chg_state == USB_CHARGER_PRESENT)
+		usb_phy->chg_type = usb_phy->charger_detect(usb_phy);
+	else
+		usb_phy->chg_type = UNKNOWN_TYPE;
+
+	schedule_work(&usb_phy->chg_work);
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_charger_state);
+
 static void devm_usb_phy_release(struct device *dev, void *res)
 {
 	struct usb_phy *phy = *(struct usb_phy **)res;
@@ -124,6 +346,44 @@ static int usb_add_extcon(struct usb_phy *x)
 					"register VBUS notifier failed\n");
 				return ret;
 			}
+		} else {
+			x->type_nb.notifier_call = usb_phy_get_charger_type;
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_SDP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB SDP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_CDP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB CDP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_DCP,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB DCP failed.\n");
+				return ret;
+			}
+
+			ret = devm_extcon_register_notifier(x->dev, x->edev,
+							    EXTCON_CHG_USB_ACA,
+							    &x->type_nb);
+			if (ret) {
+				dev_err(x->dev,
+					"register extcon USB ACA failed.\n");
+				return ret;
+			}
 		}
 
 		if (x->id_nb.notifier_call) {
@@ -145,6 +405,11 @@ static int usb_add_extcon(struct usb_phy *x)
 		}
 	}
 
+	usb_phy_set_default_current(x);
+	INIT_WORK(&x->chg_work, usb_phy_notify_charger_work);
+	x->chg_type = UNKNOWN_TYPE;
+	x->chg_state = USB_CHARGER_DEFAULT;
+
 	return 0;
 }
 
include/linux/usb/phy.h +49 -0

90 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v2 3/3 power: wm831x_power: Support USB charger current limit management

In reply to Baolin Wang

Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others.

---
 drivers/power/supply/wm831x_power.c |   61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
drivers/power/supply/wm831x_power.c +61 -0
index 7082301..3e3480708 100644
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/usb/phy.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/auxadc.h>
@@ -31,6 +32,8 @@ struct wm831x_power {
 	char usb_name[20];
 	char battery_name[20];
 	bool have_battery;
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_notify;
 };
 
 static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
@@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 };
 
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+	0,
+	2,
+	100,
+	500,
+	900,
+	1500,
+	1800,
+	550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+				   unsigned long limit, void *data)
+{
+	struct wm831x_power *wm831x_power = container_of(nb,
+							 struct wm831x_power,
+							 usb_notify);
+	unsigned int i, best;
+
+	/* Find the highest supported limit */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+		if (limit >= wm831x_usb_limits[i] &&
+		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
+			best = i;
+	}
+
+	dev_dbg(wm831x_power->wm831x->dev,
+		"Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+		        WM831X_USB_ILIM_MASK, best);
+
+	return 0;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
 		}
 	}
 
+	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
+						     "usb-phy", 0);
+	if (IS_ERR(power->usb_phy)) {
+		ret = PTR_ERR(power->usb_phy);
+		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+		goto err_bat_irq;
+	}
+
+	power->usb_notify.notifier_call = wm831x_usb_limit_change;
+	ret = usb_register_notifier(power->usb_phy,
+				    &power->usb_notify);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		goto err_bat_irq;
+	}
+
 	return ret;
 
 err_bat_irq:
@@ -637,6 +693,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
 	struct wm831x *wm831x = wm831x_power->wm831x;
 	int irq, i;
 
+	if (wm831x_power->usb_phy) {
+		usb_unregister_notifier(wm831x_power->usb_phy,
+					&wm831x_power->usb_notify);
+	}
+
 	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
 		irq = wm831x_irq(wm831x, 
 				 platform_get_irq_byname(pdev,
Signature · 6 lines
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#4 lore raw

Re: [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management

Quoted 8 lines · Baolin Wang

Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others.

---

<snip>

Quoted 5 lines

/*********************************************************************
* Battery properties
*********************************************************************/

drivers/power/supply/wm831x_power.c +0 -0
@@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
 		}

drivers/power/supply/wm831x_power.c static int wm831x_power_probe(struct platform_device *pdev) · line 657

Quoted 10 lines
drivers/power/supply/wm831x_power.c +8 -0
 	}
 
+	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
+						     "usb-phy", 0);
+	if (IS_ERR(power->usb_phy)) {
+		ret = PTR_ERR(power->usb_phy);
+		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+		goto err_bat_irq;
+	}
+

We should probably update the binding documentation for this as
well: mfd/wm831x.txt

Also I am not sure this needs to be implemented now, but what is the plan regarding pdata systems? Generally the driver supports both and it would be nice to know there is a way forward for that even if we don't implement it yet.

Thanks,
Charles

#5 lore raw

Re: [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management

Hi,

Quoted 17 lines · Charles Keepax
Quoted 8 lines · Baolin Wang

Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others.

---

<snip>

Quoted 7 lines

/*********************************************************************
* Battery properties
*********************************************************************/

(quoted diff) +0 -0
@@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
              }
      }
 
Quoted 11 lines

drivers/power/supply/wm831x_power.c static int wm831x_power_probe(struct platform_device *pdev) · line 657

Quoted 8 lines
drivers/power/supply/wm831x_power.c +8 -0
+     power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
+                                                  "usb-phy", 0);
+     if (IS_ERR(power->usb_phy)) {
+             ret = PTR_ERR(power->usb_phy);
+             dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+             goto err_bat_irq;
+     }
+

We should probably update the binding documentation for this as
well: mfd/wm831x.txt

Yes, I will update the binding documentation.

Quoted 5 lines

Also I am not sure this needs to be implemented now, but what is the plan regarding pdata systems? Generally the driver supports both and it would be nice to know there is a way forward for that even if we don't implement it yet.

OK, I'll modify this in next version. Thanks.

Signature · 2 lines
Baolin.wang
Best Regards
#6 lore raw

Re: [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management

In reply to Baolin Wang

Hi,

Quoted 7 lines · Baolin Wang

Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others.

Missing DT binding documentation, otherwise fine with me. Would be nice to convert existing drivers:

$ git grep -l extcon -- drivers/power/supply
drivers/power/supply/axp288_charger.c
drivers/power/supply/bq24190_charger.c
drivers/power/supply/charger-manager.c
drivers/power/supply/qcom_smbb.c

-- Sebastian

Quoted 107 lines
---
 drivers/power/supply/wm831x_power.c |   61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
drivers/power/supply/wm831x_power.c +61 -0
index 7082301..3e3480708 100644
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/usb/phy.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/auxadc.h>
@@ -31,6 +32,8 @@ struct wm831x_power {
 	char usb_name[20];
 	char battery_name[20];
 	bool have_battery;
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_notify;
 };
 
 static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
@@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 };
 
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+	0,
+	2,
+	100,
+	500,
+	900,
+	1500,
+	1800,
+	550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+				   unsigned long limit, void *data)
+{
+	struct wm831x_power *wm831x_power = container_of(nb,
+							 struct wm831x_power,
+							 usb_notify);
+	unsigned int i, best;
+
+	/* Find the highest supported limit */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+		if (limit >= wm831x_usb_limits[i] &&
+		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
+			best = i;
+	}
+
+	dev_dbg(wm831x_power->wm831x->dev,
+		"Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+		        WM831X_USB_ILIM_MASK, best);
+
+	return 0;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
 		}
 	}
 
+	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
+						     "usb-phy", 0);
+	if (IS_ERR(power->usb_phy)) {
+		ret = PTR_ERR(power->usb_phy);
+		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+		goto err_bat_irq;
+	}
+
+	power->usb_notify.notifier_call = wm831x_usb_limit_change;
+	ret = usb_register_notifier(power->usb_phy,
+				    &power->usb_notify);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		goto err_bat_irq;
+	}
+
 	return ret;
 
 err_bat_irq:
@@ -637,6 +693,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
 	struct wm831x *wm831x = wm831x_power->wm831x;
 	int irq, i;
 
+	if (wm831x_power->usb_phy) {
+		usb_unregister_notifier(wm831x_power->usb_phy,
+					&wm831x_power->usb_notify);
+	}
+
 	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
 		irq = wm831x_irq(wm831x, 
 				 platform_get_irq_byname(pdev,
Signature · 1 line
1.7.9.5
#7 lore raw

Re: [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management

Hi,

Quoted 11 lines · Sebastian Reichel

Hi,

Quoted 7 lines · Baolin Wang

Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others.

Quoted 8 lines

Missing DT binding documentation, otherwise fine with me. Would be nice to convert existing drivers:

$ git grep -l extcon -- drivers/power/supply
drivers/power/supply/axp288_charger.c
drivers/power/supply/bq24190_charger.c
drivers/power/supply/charger-manager.c
drivers/power/supply/qcom_smbb.c

I'll create new patches with adding the DT binding documentation if there are no objections for USB phy modification, moreover I will help to convert these drivers you listed. Thanks.

Quoted 110 lines

-- Sebastian

Quoted 107 lines
---
 drivers/power/supply/wm831x_power.c |   61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
drivers/power/supply/wm831x_power.c +61 -1
index 7082301..3e3480708 100644
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/usb/phy.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/auxadc.h>
@@ -31,6 +32,8 @@ struct wm831x_power {
      char usb_name[20];
      char battery_name[20];
      bool have_battery;
+     struct usb_phy *usb_phy;
+     struct notifier_block usb_notify;
 };
 
 static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
@@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
      POWER_SUPPLY_PROP_VOLTAGE_NOW,
 };
 
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+     0,
+     2,
+     100,
+     500,
+     900,
+     1500,
+     1800,
+     550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+                                unsigned long limit, void *data)
+{
+     struct wm831x_power *wm831x_power = container_of(nb,
+                                                      struct wm831x_power,
+                                                      usb_notify);
+     unsigned int i, best;
+
+     /* Find the highest supported limit */
+     best = 0;
+     for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+             if (limit >= wm831x_usb_limits[i] &&
+                 wm831x_usb_limits[best] < wm831x_usb_limits[i])
+                     best = i;
+     }
+
+     dev_dbg(wm831x_power->wm831x->dev,
+             "Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+     wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+                     WM831X_USB_ILIM_MASK, best);
+
+     return 0;
+}
+
 /*********************************************************************
  *           Battery properties
  *********************************************************************/
@@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
              }
      }
 
+     power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
+                                                  "usb-phy", 0);
+     if (IS_ERR(power->usb_phy)) {
+             ret = PTR_ERR(power->usb_phy);
+             dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+             goto err_bat_irq;
+     }
+
+     power->usb_notify.notifier_call = wm831x_usb_limit_change;
+     ret = usb_register_notifier(power->usb_phy,
+                                 &power->usb_notify);
+     if (ret) {
+             dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+             goto err_bat_irq;
+     }
+
      return ret;
 
 err_bat_irq:
@@ -637,6 +693,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
      struct wm831x *wm831x = wm831x_power->wm831x;
      int irq, i;
 
+     if (wm831x_power->usb_phy) {
+             usb_unregister_notifier(wm831x_power->usb_phy,
+                                     &wm831x_power->usb_notify);
+     }
+
      for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
              irq = wm831x_irq(wm831x,
                               platform_get_irq_byname(pdev,
--

1.7.9.5

Signature · 2 lines
Baolin.wang
Best Regards
#8 lore raw
In reply to Baolin Wang

Hi,

Quoted 9 lines · Baolin Wang

Currently the Linux kernel does not provide any standard integration of this feature that integrates the USB subsystem with the system power regulation provided by PMICs meaning that either vendors must add this in their kernels or USB gadget devices based on Linux (such as mobile phones) may not behave as they should. Thus provide a standard USB charger support in USB phy core for doing this in kernel.

Now introduce one user with wm831x_power to support and test the usb charger.

Quoted 7 lines

Changes since v1:
- Fix building errors.

Baolin Wang (3):
include: uapi: usb: Introduce USB charger type and state definition
usb: phy: Add USB charger support
power: wm831x_power: Support USB charger current limit management

Any suggestion for the USB charger support in USB phy core? Thanks.

Quoted 11 lines
 drivers/power/supply/wm831x_power.c |   61 ++++++++
 drivers/usb/phy/phy.c               |  265 +++++++++++++++++++++++++++++++++++
 include/linux/usb/phy.h             |   49 +++++++
 include/uapi/linux/usb/charger.h    |   31 ++++
 4 files changed, 406 insertions(+)
 create mode 100644 include/uapi/linux/usb/charger.h

--
1.7.9.5

Signature · 2 lines
Baolin.wang
Best Regards