arch/arm/boot/dts: Add watchdog 1 optional properties.
Subsystems (2)
PATCH 1/1 arch/arm/boot/dts: Add watchdog 1 optional properties.
Define external-signal and no system reset optional parameters to the dev tree so that watchdog 1 can be configured for these modes.
Signed-off-by Christopher Bostic <[email protected]>
--- arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +5 -0
@@ -420,6 +420,11 @@ aspeed,external-nodes = <&gfx &lhc>; }; +&wdt1 { + aspeed,no-sys-reset; + aspeed,external-signal; +}; + &wdt2 { status = "okay"; };
Signature · 1 line
1.8.2.2
Joel Stanley
maintainerQuoted 3 lines · Christopher Bostic
Define external-signal and no system reset optional parameters to the dev tree so that watchdog 1 can be configured for these modes.
Thanks. Take a look at the history of the dts changes. Convention is to use the prefix:
"ARM: dts: aspeed: Add watchdog 1 optional properties"
Keep it in mind for next time. I'll fix it up for you when I apply it.
Cheers,
Joel
Quoted 25 lines
Signed-off-by Christopher Bostic <[email protected]>--- arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +5
-1@@ -420,6 +420,11 @@ aspeed,external-nodes = <&gfx &lhc>; }; +&wdt1 { + aspeed,no-sys-reset; + aspeed,external-signal; +}; + &wdt2 { status = "okay"; }; --1.8.2.2