Issue with the HOST_DIR/usr -> HOST_DIR move
Hello Arnout,
I've started rebuilding the pre-built Buildroot external toolchains after the HOST_DIR/usr -> HOST_DIR move. I've dropped my hack on the toolchain wrapper to support the fact that I was moving the toolchain out of the usr/ folder... because obviously this is no longer needed. So basically, I'm building on top of master + a patch that builds host-flex, host-gmp, host-mpc, etc. as static libraries instead of shared ones.
Using this defconfig:
BR2_arm=y BR2_HOST_DIR="/opt/br-arm-full-2017.05-1071-gef605f5" BR2_JLEVEL=16
BR2_KERNEL_HEADERS_3_10=y BR2_TOOLCHAIN_BUILDROOT_LOCALE=y BR2_GCC_VERSION_4_9_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
# BR2_TARGET_ROOTFS_TAR is not set
I'm seeing this build failure:
ESC[7m>>> uclibc 1.0.25 BuildingESC[27m/usr/bin/make -j16 -C /opt/toolchain-build/build/uclibc-1.0.25 ARCH="arm" CROSS_COMPILE="/opt/br-arm-full-2017.05-1071-gef605f5/bin/arm-buildroot-linux-uclibcgnueabi-" UCLIBC_EXTRA_CFLAGS=" " HOSTCC="/usr/bin/gcc" headers /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
make[1]: Entering directory `/opt/toolchain-build/build/uclibc-1.0.25'
MKDIR include/bits
GEN include/bits/uClibc_config.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
LN include/semaphore.h
LN include/pthread.h
LN include/bits/libc-lock.h
LN include/bits/stdio-lock.h
LN include/bits/pthreadtypes.h
LN include/bits/semaphore.h
GEN include/bits/sysnum.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory /opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
There are two problems here:
* First, the problem that $(HOST_DIR)/usr didn't exist. The reason is that you rule that creates $(HOST_DIR)/usr is only triggered if the Buildroot Makefile creates $(HOST_DIR). But when you're building a SDK inside /opt/foo/, therefore setting BR2_HOST_DIR=/opt/foo/, it's pretty likely that /opt/foo/ might exist before Buildroot gets triggered. In such a situation, your $(HOST_DIR) rule in the main Makefile doesn't get triggered, and $(HOST_DIR)/usr is not created.
* Even if the symlink doesn't exist, the build should still work. Indeed, the symlink was kept for backward compatibility reasons, but here I'm doing a full build from scratch, which I would expect to work even without the usr/ compatibility symlink.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Quoted 51 lines · Thomas Petazzoni
Hello Arnout,
I've started rebuilding the pre-built Buildroot external toolchains after the HOST_DIR/usr ->
HOST_DIRmove. I've dropped my hack on the toolchain wrapper to support the fact that I was moving the toolchain out of theusr/folder... because obviously this is no longer needed. So basically, I'm building on top of master + a patch that builds host-flex, host-gmp, host-mpc, etc. as static libraries instead of shared ones.Using this defconfig:
BR2_arm=y BR2_HOST_DIR="/opt/br-arm-full-2017.05-1071-gef605f5" BR2_JLEVEL=16
BR2_KERNEL_HEADERS_3_10=y BR2_TOOLCHAIN_BUILDROOT_LOCALE=y BR2_GCC_VERSION_4_9_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
#BR2_PACKAGE_BUSYBOXis not set
#BR2_TARGET_ROOTFS_TARis not setI'm seeing this build failure:
ESC[7m>>> uclibc 1.0.25 BuildingESC[27m
/usr/bin/make-j16 -C/opt/toolchain-build/build/uclibc-1.0.25ARCH="arm" CROSS_COMPILE="/opt/br-arm-full-2017.05-1071-gef605f5/bin/arm-buildroot-linux-uclibcgnueabi-" UCLIBC_EXTRA_CFLAGS=" " HOSTCC="/usr/bin/gcc" headers/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
make[1]: Entering directory `/opt/toolchain-build/build/uclibc-1.0.25'
MKDIRinclude/bits
GENinclude/bits/uClibc_config.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
LNinclude/semaphore.h
LNinclude/pthread.h
LNinclude/bits/libc-lock.h
LNinclude/bits/stdio-lock.h
LNinclude/bits/pthreadtypes.h
LNinclude/bits/semaphore.h
GENinclude/bits/sysnum.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directoryThere are two problems here:
Quoted 7 lines
* First, the problem that $(HOST_DIR)/usr didn't exist. The reason is that you rule that creates $(HOST_DIR)/usr is only triggered if the Buildroot
Makefilecreates $(HOST_DIR). But when you're building a SDK inside/opt/foo/, therefore setting BR2_HOST_DIR=/opt/foo/, it's pretty likely that/opt/foo/might exist before Buildroot gets triggered. In such a situation, your $(HOST_DIR) rule in the mainMakefiledoesn't get triggered, and $(HOST_DIR)/usr is not created.
I never thought of that - I assumed that the HOST_DIR would always be created
by Buildroot. But indeed it does make sense to install a toolchain in a pre-existing directory.
There is one problem with that, though: in such a situation, it is also
possible that the usr/ directory already exists, so we can't create the compatibility symlink. I guess we'll just have to live with that.
I'll make an explicit rule for $(HOST_DIR)/usr to solve this.
Quoted 4 lines
* Even if the symlink doesn't exist, the build should still work. Indeed, the symlink was kept for backward compatibility reasons, but here I'm doing a full build from scratch, which I would expect to work even without the
usr/compatibility symlink.
D'oh, this is really, really weird, I'm sure I looked at that piece of code
when I made my initial version of the series, but apparently I didn't look at it again last week. There are still *three* references to $(HOST_DIR)/usr in toolchain-wrapper.c...
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
Arnout, All,
On 2017-07-09 21:30 +0200, Arnout Vandecappelle spake thusly:
Quoted 64 lines · Thomas Petazzoni
Quoted 51 lines
Hello Arnout,
I've started rebuilding the pre-built Buildroot external toolchains after the HOST_DIR/usr ->
HOST_DIRmove. I've dropped my hack on the toolchain wrapper to support the fact that I was moving the toolchain out of theusr/folder... because obviously this is no longer needed. So basically, I'm building on top of master + a patch that builds host-flex, host-gmp, host-mpc, etc. as static libraries instead of shared ones.Using this defconfig:
BR2_arm=y BR2_HOST_DIR="/opt/br-arm-full-2017.05-1071-gef605f5" BR2_JLEVEL=16
BR2_KERNEL_HEADERS_3_10=y BR2_TOOLCHAIN_BUILDROOT_LOCALE=y BR2_GCC_VERSION_4_9_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
#BR2_PACKAGE_BUSYBOXis not set
#BR2_TARGET_ROOTFS_TARis not setI'm seeing this build failure:
ESC[7m>>> uclibc 1.0.25 BuildingESC[27m
/usr/bin/make-j16 -C/opt/toolchain-build/build/uclibc-1.0.25ARCH="arm" CROSS_COMPILE="/opt/br-arm-full-2017.05-1071-gef605f5/bin/arm-buildroot-linux-uclibcgnueabi-" UCLIBC_EXTRA_CFLAGS=" " HOSTCC="/usr/bin/gcc" headers/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
make[1]: Entering directory `/opt/toolchain-build/build/uclibc-1.0.25'
MKDIRinclude/bits
GENinclude/bits/uClibc_config.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory
LNinclude/semaphore.h
LNinclude/pthread.h
LNinclude/bits/libc-lock.h
LNinclude/bits/stdio-lock.h
LNinclude/bits/pthreadtypes.h
LNinclude/bits/semaphore.h
GENinclude/bits/sysnum.h/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directory/opt/br-arm-full-2017.05-1071-gef605f5/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc.br_real: No such file or directoryThere are two problems here:
Quoted 7 lines
* First, the problem that $(HOST_DIR)/usr didn't exist. The reason is that you rule that creates $(HOST_DIR)/usr is only triggered if the Buildroot
Makefilecreates $(HOST_DIR). But when you're building a SDK inside/opt/foo/, therefore setting BR2_HOST_DIR=/opt/foo/, it's pretty likely that/opt/foo/might exist before Buildroot gets triggered. In such a situation, your $(HOST_DIR) rule in the mainMakefiledoesn't get triggered, and $(HOST_DIR)/usr is not created.I never thought of that - I assumed that the
HOST_DIRwould always be created
by Buildroot. But indeed it does make sense to install a toolchain in a pre-existing directory.
Quoted 5 lines
There is one problem with that, though: in such a situation, it is also
possible that theusr/directory already exists, so we can't create the compatibility symlink. I guess we'll just have to live with that.I'll make an explicit rule for $(HOST_DIR)/usr to solve this.
I can totally understand the need to install in an existing directory, but I don;t think we should accept that there is a usr/ directory in there.
As far as I understand, we keep the compatibility usr/ as a symlink for two reasons:
- that a host-package accidentally wants to install stuff in usr/ and we missed that (e.g. for out-of-tree host-packages), but still want the build to succeed,
- that existing users' post-build/fakeroot/image scripts still work without modification.
However, we do not add $(HOST_DIR)/usr/{s,}bin in the PATH, so an existing usr/ directory would have the potential to break when a package unexpectedly installs stuff therein, especially out-of-tree packages. And in this case, the build is broken.
So I would argue that we should only accept to use an existing directory if it is empty.
Regards,
Yann E. MORIN.
Quoted 25 lines
Quoted 4 lines
* Even if the symlink doesn't exist, the build should still work. Indeed, the symlink was kept for backward compatibility reasons, but here I'm doing a full build from scratch, which I would expect to work even without the
usr/compatibility symlink.D'oh, this is really, really weird, I'm sure I looked at that piece of code
when I made my initial version of the series, but apparently I didn't look at it again last week. There are still *three* references to $(HOST_DIR)/usr intoolchain-wrapper.c...Regards,
ArnoutSignature · 10 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Quoted 3 lines · Yann E. MORIN
Arnout, All,
On 2017-07-09 21:30 +0200, Arnout Vandecappelle spake thusly:
[snip]
Quoted 16 lines
Quoted 1 line
I'll make an explicit rule for $(HOST_DIR)/usr to solve this.
I can totally understand the need to install in an existing directory, but I don;t think we should accept that there is a
usr/directory in there.As far as I understand, we keep the compatibility
usr/as a symlink for two reasons:- that a host-package accidentally wants to install stuff in
usr/and we missed that (e.g. for out-of-tree host-packages), but still want the build to succeed,- that existing users' post-build/fakeroot/image scripts still work without modification.
Quoted 7 lines
However, we do not add $(HOST_DIR)/usr/{s,}bin in the PATH, so an existing
usr/directory would have the potential to break when a package unexpectedly installs stuff therein, especially out-of-tree packages. And in this case, the build is broken.So I would argue that we should only accept to use an existing directory if it is empty.
I agree with your reasoning. However, it's a bit complicated to accomplish.
Since $(HOST_DIR)/usr exists already, we can't use the normal make dependency mechanism to trigger the check. So we'd either need to FORCE it, or add another PHONY rule just for this check.
So I'm not sure that the added complexity is really warranted.
I'll see if I can cook something up and add it as RFC to my series.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF