clk: moxart: remove unnecessary statics
Subsystems (2)
PATCH v2 1/1 clk: moxart: remove unnecessary statics
Remove unnecessary static on local variable _base_ in both functions moxart_of_pll_clk_init() and moxart_of_apb_clk_init(). Such variables are initialized before being used, on every execution path throughout the mentioned functions. The statics have no benefit and, removing them reduce the code size.
This issue was detected using Coccinelle and the following semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
In the following log you can see the difference in the code size. Also, notice that the bss segment is reduced down to zero. This log is the output of the size command, before and after the code change:
before:
text data bss dec hex filename 1724 384 128 2236 8bc drivers/clk/clk-moxart.o
after:
text data bss dec hex filename
1697 240 0 1937 791 drivers/clk/clk-moxart.o
---
Changes in v2:
Remove static on local variable _base_
in function moxart_of_apb_clk_init()
drivers/clk/clk-moxart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/clk-moxart.c +2 -2
@@ -18,7 +18,7 @@static void __init moxart_of_pll_clk_init (struct device_node *node) { -static void __iomem *base; +void __iomem *base;struct clk_hw *hw;struct clk *ref_clk;unsigned int mul;
@@ -57,7 +57,7 @@ CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",static void __init moxart_of_apb_clk_init (struct device_node *node) { -static void __iomem *base; +void __iomem *base;struct clk_hw *hw;struct clk *pll_clk;unsigned int div, val;
Signature · 1 line
2.5.0
Stephen Boyd
AppliedQuoted 39 lines · Gustavo A. R. Silva
Remove unnecessary static on local variable _base_ in both functions
moxart_of_pll_clk_init()andmoxart_of_apb_clk_init(). Such variables are initialized before being used, on every execution path throughout the mentioned functions. The statics have no benefit and, removing them reduce the code size.This issue was detected using Coccinelle and the following semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@static T x@p;
...
x = <+...x...+>@@
identifier x;
expression e;
type T;
position p != bad.p;
@@-static
T x@p;
... when != x
when strict
?x = e;In the following log you can see the difference in the code size. Also, notice that the bss segment is reduced down to zero. This log is the output of the size command, before and after the code change:
before:
text data bss dec hex filename 1724 384 128 2236 8bc drivers/clk/clk-moxart.o
Quoted 6 lines
after:
text data bss dec hex filename
1697 240 0 1937 791drivers/clk/clk-moxart.oSigned-off-by Gustavo A. R. Silva <[email protected]>---
Applied to clk-next
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project