4.4.78-stable review
Greg Kroah-Hartman
maintainercover 4.4.78-stable review
This is the start of the stable review cycle for the 4.4.78 release. There are 57 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri Jul 21 11:12:31 UTC 2017. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.78-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.78-rc1
Haozhong Zhang <[email protected]>
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
Jim Mattson <[email protected]>
kvm: vmx: Check value written to IA32_BNDCFGS
Jim Mattson <[email protected]>
kvm: x86: Guest BNDCFGS requires guest MPX support
Jim Mattson <[email protected]>
kvm: vmx: Do not disable intercepts for BNDCFGS
Paolo Bonzini <[email protected]>
KVM: x86: disable MPX if host did not enable MPX XSAVE features
Pavankumar Kondeti <[email protected]>
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
Dan Carpenter <[email protected]>
PM / QoS: return -EINVAL for bogus strings
Thomas Gleixner <[email protected]>
PM / wakeirq: Convert to SRCU
Lauro Ramos Venancio <[email protected]>
sched/topology: Optimize build_group_mask()
Peter Zijlstra <[email protected]>
sched/topology: Fix overlapping sched_group_mask
Horia Geantă <[email protected]>
crypto: caam - fix signals handling
Herbert Xu <[email protected]>
crypto: sha1-ssse3 - Disable avx2
Gilad Ben-Yossef <[email protected]>
crypto: atmel - only treat EBUSY as transient if backlog
Martin Hicks <[email protected]>
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
Helge Deller <[email protected]>
mm: fix overflow check in expand_upwards()
Josh Zimmerman <[email protected]>
tpm: Issue a TPM2_Shutdown for TPM2 devices.
Josh Zimmerman <[email protected]>
Add "shutdown" to "struct class".
Jason Gunthorpe <[email protected]>
tpm: Provide strong locking for device removal
Jason Gunthorpe <[email protected]>
tpm: Get rid of chip->pdev
Andy Lutomirski <[email protected]>
selftests/capabilities: Fix the test_execve test
Eric W. Biederman <[email protected]>
mnt: Make propagate_umount less slow for overlapping mount propagation trees
Eric W. Biederman <[email protected]>
mnt: In propgate_umount handle visiting mounts in any order
Eric W. Biederman <[email protected]>
mnt: In umount propagation reparent in a separate pass
Adam Borowski <[email protected]>
vt: fix unchecked __put_user() in tioclinux ioctls
Kees Cook <[email protected]>
exec: Limit arg stack to at most 75% of _STK_LIM
Kees Cook <[email protected]>
s390: reduce ELF_ET_DYN_BASE
Kees Cook <[email protected]>
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
Kees Cook <[email protected]>
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
Kees Cook <[email protected]>
arm: move ELF_ET_DYN_BASE to 4MB
Kees Cook <[email protected]>
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
Cyril Bur <[email protected]>
checkpatch: silence perl 5.26.0 unescaped left brace warnings
Sahitya Tummala <[email protected]>
fs/dcache.c: fix spin lockup issue on nlru->lock
Sahitya Tummala <[email protected]>
mm/list_lru.c: fix list_lru_count_node() to be race free
Marcin Nowakowski <[email protected]>
kernel/extable.c: mark core_kernel_text notrace
Ben Hutchings <[email protected]>
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
Helge Deller <[email protected]>
parisc/mm: Ensure IRQs are off in switch_mm()
Thomas Bogendoerfer <[email protected]>
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
Eric Biggers <[email protected]>
parisc: use compat_sys_keyctl()
Helge Deller <[email protected]>
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
Suzuki K Poulose <[email protected]>
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
Srinivas Dasari <[email protected]>
cfg80211: Check if PMKID attribute is of expected size
Srinivas Dasari <[email protected]>
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
Srinivas Dasari <[email protected]>
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
Arend van Spriel <[email protected]>
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
Sowmini Varadhan <[email protected]>
rds: tcp: use sock_create_lite() to create the accept socket
Nikolay Aleksandrov <[email protected]>
vrf: fix bug_on triggered by rx when destroying a vrf
David Ahern <[email protected]>
net: ipv6: Compare lwstate in detecting duplicate nexthops
Sabrina Dubroca <[email protected]>
ipv6: dad: don't remove dynamic addresses if link is down
Michal Kubeček <[email protected]>
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
Daniel Borkmann <[email protected]>
bpf: prevent leaking pointer via xadd on unpriviledged
Eric Dumazet <[email protected]>
net: prevent sign extension in dev_get_stats()
WANG Cong <[email protected]>
tcp: reset sk_rx_dst in tcp_disconnect()
Richard Cochran <[email protected]>
net: dp83640: Avoid NULL pointer dereference.
WANG Cong <[email protected]>
ipv6: avoid unregistering inet6_dev for loopback
Zach Brown <[email protected]>
net/phy: micrel: configure intterupts after autoneg workaround
Gao Feng <[email protected]>
net: sched: Fix one possible panic when no destroy callback
Eric Dumazet <[email protected]>
net_sched: fix error recovery at qdisc creation
-------------
Diffstat:
Makefile | 4 +- arch/arm/include/asm/elf.h | 8 +- arch/arm64/include/asm/elf.h | 12 +- arch/parisc/include/asm/dma-mapping.h | 11 +- arch/parisc/include/asm/mmu_context.h | 15 +- arch/parisc/kernel/syscall_table.S | 2 +- arch/parisc/mm/fault.c | 2 +- arch/powerpc/include/asm/elf.h | 13 +- arch/s390/include/asm/elf.h | 15 +- arch/x86/crypto/sha1_ssse3_glue.c | 2 +- arch/x86/include/asm/elf.h | 13 +- arch/x86/include/asm/msr-index.h | 2 + arch/x86/kvm/cpuid.c | 13 +- arch/x86/kvm/cpuid.h | 9 +- arch/x86/kvm/vmx.c | 19 +- drivers/base/core.c | 6 +- drivers/base/power/sysfs.c | 2 + drivers/base/power/wakeup.c | 30 +-- drivers/char/tpm/tpm-chip.c | 121 ++++++++++-- drivers/char/tpm/tpm-dev.c | 15 +- drivers/char/tpm/tpm-interface.c | 49 ++--- drivers/char/tpm/tpm-sysfs.c | 18 +- drivers/char/tpm/tpm.h | 15 +- drivers/char/tpm/tpm2-cmd.c | 8 +- drivers/char/tpm/tpm_atmel.c | 14 +- drivers/char/tpm/tpm_i2c_atmel.c | 16 +- drivers/char/tpm/tpm_i2c_infineon.c | 6 +- drivers/char/tpm/tpm_i2c_nuvoton.c | 22 +-- drivers/char/tpm/tpm_infineon.c | 22 +-- drivers/char/tpm/tpm_nsc.c | 20 +- drivers/char/tpm/tpm_tis.c | 16 +- drivers/crypto/atmel-sha.c | 4 +- drivers/crypto/caam/caamhash.c | 2 +- drivers/crypto/caam/key_gen.c | 2 +- drivers/crypto/talitos.c | 7 +- drivers/irqchip/irq-gic-v3.c | 3 + drivers/net/phy/dp83640.c | 2 +- drivers/net/phy/micrel.c | 2 + drivers/net/vrf.c | 18 +- drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c | 5 + drivers/parisc/ccio-dma.c | 12 ++ drivers/parisc/dino.c | 5 +- drivers/parisc/lba_pci.c | 6 +- drivers/parisc/sba_iommu.c | 14 ++ drivers/tty/vt/vt.c | 6 +- fs/binfmt_elf.c | 59 +++++- fs/dcache.c | 5 +- fs/exec.c | 11 +- fs/mount.h | 1 + fs/namespace.c | 1 + fs/pnode.c | 212 ++++++++++++++++----- include/linux/device.h | 2 + include/linux/list_lru.h | 1 + include/net/ip6_route.h | 8 + kernel/bpf/verifier.c | 5 + kernel/extable.c | 2 +- kernel/sched/core.c | 22 ++- kernel/trace/trace.c | 2 +- mm/list_lru.c | 14 +- mm/mmap.c | 2 +- net/core/dev.c | 26 ++- net/ipv4/tcp.c | 2 + net/ipv6/addrconf.c | 27 +-- net/ipv6/ip6_fib.c | 5 +- net/ipv6/route.c | 8 +- net/rds/tcp_listen.c | 2 +- net/sched/sch_api.c | 3 + net/sched/sch_hhf.c | 8 +- net/sched/sch_mq.c | 10 +- net/sched/sch_mqprio.c | 19 +- net/sched/sch_sfq.c | 3 +- net/wireless/nl80211.c | 8 +- scripts/checkpatch.pl | 6 +- tools/lib/lockdep/uinclude/linux/lockdep.h | 2 +- tools/testing/selftests/capabilities/test_execve.c | 7 +- 75 files changed, 747 insertions(+), 344 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/57 net_sched: fix error recovery at qdisc creation
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 87b60cfacf9f17cf71933c6e33b66e68160af71d upstream.
Dmitry reported uses after free in qdisc code [1]
The problem here is that ops->init() can return an error.
qdisc_create_dflt() then call ops->destroy(),
while qdisc_create() does _not_ call it.
Four qdisc chose to call their own ops->destroy(), assuming their caller would not.
This patch makes sure qdisc_create() calls ops->destroy() and fixes the four qdisc to avoid double free.
[1]
BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr ffff8801d415d440 Read of size 8 by task syz-executor2/5030 CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400 ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898 ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0 Call Trace: [<ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51 [<ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285 [<ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326 [<ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 [<ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953 [<ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848 [<ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline] [<ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064 [<ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403 [<ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858 [<ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926 [<ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260 [<ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546 [<ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879 [<ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958 [<ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline] [<ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611 [<ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline] [<ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617 [<ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17
--- net/sched/sch_api.c | 2 ++ net/sched/sch_hhf.c | 8 ++++++-- net/sched/sch_mq.c | 10 +++------- net/sched/sch_mqprio.c | 19 ++++++------------- net/sched/sch_sfq.c | 3 ++- 5 files changed, 19 insertions(+), 23 deletions(-)
net/sched/sch_api.c +2 -0
@@ -1004,6 +1004,8 @@ qdisc_create(struct net_device *dev, strreturn sch; } +/* ops->init() failed, we call ->destroy() like qdisc_create_dflt() */ + ops->destroy (sch); err_out3:dev_put (dev);kfree ((char *) sch - sch->padded);
net/sched/sch_hhf.c +6 -2
@@ -636,7 +636,9 @@ static int hhf_init(struct Qdisc *sch, s q->hhf_arrays[i] =hhf_zalloc (HHF_ARRAYS_LEN *sizeof (u32));if (!q->hhf_arrays[i]) { -hhf_destroy (sch); +/* Note: hhf_destroy() will be called +* by our caller. +*/ return -ENOMEM ; } }
@@ -647,7 +649,9 @@ static int hhf_init(struct Qdisc *sch, s q->hhf_valid_bits[i] =hhf_zalloc (HHF_ARRAYS_LEN /BITS_PER_BYTE );if (!q->hhf_valid_bits[i]) { -hhf_destroy (sch); +/* Note: hhf_destroy() will be called +* by our caller. +*/ return -ENOMEM ; } }
net/sched/sch_mq.c +3 -7
@@ -52,7 +52,7 @@ static int mq_init(struct Qdisc *sch, st/* pre-allocate qdiscs, attachment can't fail */ priv->qdiscs =kcalloc (dev->num_tx_queues,sizeof (priv->qdiscs[0 ]),GFP_KERNEL ); -if (priv->qdiscs ==NULL ) +if (!priv->qdiscs)return -ENOMEM ;for (ntx =0 ; ntx < dev->num_tx_queues; ntx++) {
@@ -60,18 +60,14 @@ static int mq_init(struct Qdisc *sch, st qdisc =qdisc_create_dflt (dev_queue, default_qdisc_ops,TC_H_MAKE (TC_H_MAJ (sch->handle),TC_H_MIN (ntx +1 ))); -if (qdisc ==NULL ) - goto err; +if (!qdisc) +return -ENOMEM ; priv->qdiscs[ntx] = qdisc; qdisc->flags |=TCQ_F_ONETXQUEUE |TCQ_F_NOPARENT ; } sch->flags |=TCQ_F_MQROOT ;return 0 ; - -err: -mq_destroy (sch); -return -ENOMEM ; }static void mq_attach (struct Qdisc *sch)
net/sched/sch_mqprio.c +6 -13
@@ -117,20 +117,17 @@ static int mqprio_init(struct Qdisc *sch/* pre-allocate qdisc, attachment can't fail */ priv->qdiscs =kcalloc (dev->num_tx_queues,sizeof (priv->qdiscs[0 ]),GFP_KERNEL ); -if (priv->qdiscs ==NULL ) { - err = -ENOMEM ; - goto err; - } +if (!priv->qdiscs) +return -ENOMEM ;for (i =0 ; i < dev->num_tx_queues; i++) { dev_queue =netdev_get_tx_queue (dev, i); qdisc =qdisc_create_dflt (dev_queue, default_qdisc_ops,TC_H_MAKE (TC_H_MAJ (sch->handle),TC_H_MIN (i +1 ))); -if (qdisc ==NULL ) { - err = -ENOMEM ; - goto err; - } +if (!qdisc) +return -ENOMEM ; + priv->qdiscs[i] = qdisc; qdisc->flags |=TCQ_F_ONETXQUEUE |TCQ_F_NOPARENT ; }
@@ -143,7 +140,7 @@ static int mqprio_init(struct Qdisc *sch priv->hw_owned =1 ; err = dev->netdev_ops->ndo_setup_tc (dev, qopt->num_tc);if (err) - goto err; +return err; }else {netdev_set_num_tc (dev, qopt->num_tc);for (i =0 ; i < qopt->num_tc; i++)
@@ -157,10 +154,6 @@ static int mqprio_init(struct Qdisc *sch sch->flags |=TCQ_F_MQROOT ;return 0 ; - -err: -mqprio_destroy (sch); -return err; }static void mqprio_attach (struct Qdisc *sch)
net/sched/sch_sfq.c +2 -1
@@ -742,9 +742,10 @@ static int sfq_init(struct Qdisc *sch, s q->ht =sfq_alloc (sizeof (q->ht[0 ]) * q->divisor); q->slots =sfq_alloc (sizeof (q->slots[0 ]) * q->maxflows);if (!q->ht || !q->slots) { -sfq_destroy (sch); +/* Note: sfq_destroy() will be called by our caller */ return -ENOMEM ; } +for (i =0 ; i < q->divisor; i++) q->ht[i] =SFQ_EMPTY_SLOT ;
Greg Kroah-Hartman
maintainerPATCH 2/57 net: sched: Fix one possible panic when no destroy callback
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Feng <[email protected]>
commit c1a4872ebfb83b1af7144f7b29ac8c4b344a12a8 upstream.
When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on.
Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result.
Now add one the check for destroy to avoid the possible panic.
--- net/sched/sch_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/sched/sch_api.c +2 -1
@@ -1005,7 +1005,8 @@ qdisc_create(struct net_device *dev, strreturn sch; }/* ops->init() failed, we call ->destroy() like qdisc_create_dflt() */ - ops->destroy (sch); +if (ops->destroy) + ops->destroy (sch); err_out3:dev_put (dev);kfree ((char *) sch - sch->padded);
Greg Kroah-Hartman
maintainerPATCH 3/57 net/phy: micrel: configure intterupts after autoneg workaround
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zach Brown <[email protected]>
commit b866203d872d5deeafcecd25ea429d6748b5bd56 upstream.
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy.
--- drivers/net/phy/micrel.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/phy/micrel.c +2 -0
@@ -539,6 +539,8 @@ static int ksz9031_read_status(struct phif ((regval &0xFF ) ==0xFF ) {phy_init_hw (phydev); phydev->link =0 ; +if (phydev->drv->config_intr &&phy_interrupt_is_valid (phydev)) + phydev->drv->config_intr (phydev); }return 0 ;
Greg Kroah-Hartman
maintainerPATCH 4/57 ipv6: avoid unregistering inet6_dev for loopback
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: WANG Cong <[email protected]>
commit 60abc0be96e00ca71bac083215ac91ad2e575096 upstream.
The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call.
In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af29bc ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback.
Thanks a lot to Andrey for finding a reliable reproducer.
--- net/ipv6/addrconf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
net/ipv6/addrconf.c +3 -2
@@ -3143,6 +3143,7 @@ static int addrconf_notify(struct notifi {struct net_device *dev =netdev_notifier_info_to_dev (ptr);struct inet6_dev *idev =__in6_dev_get (dev); +struct net *net =dev_net (dev);int run_pending =0 ;int err;
@@ -3158,7 +3159,7 @@ static int addrconf_notify(struct notificase NETDEV_CHANGEMTU :/* if MTU under IPV6_MIN_MTU stop IPv6 on this interface. */ if (dev->mtu <IPV6_MIN_MTU ) { -addrconf_ifdown (dev,1 ); +addrconf_ifdown (dev, dev != net->loopback_dev);break ; }
@@ -3271,7 +3272,7 @@ static int addrconf_notify(struct notifi* IPV6_MIN_MTU stop IPv6 on this interface. */ if (dev->mtu <IPV6_MIN_MTU ) -addrconf_ifdown (dev,1 ); +addrconf_ifdown (dev, dev != net->loopback_dev); }break ;
Greg Kroah-Hartman
maintainerPATCH 5/57 net: dp83640: Avoid NULL pointer dereference.
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Cochran <[email protected]>
commit db9d8b29d19d2801793e4419f4c6272bf8951c62 upstream.
The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up.
Even though the kernel-doc was subsequently updated in commit 7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version.
This fix should be applied to the stable trees as well.
--- drivers/net/phy/dp83640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/dp83640.c +1 -1
@@ -907,7 +907,7 @@ static void decode_txts(struct dp83640_pif (overflow) {pr_debug ("tx timestamp queue overflow, count %d\n" , overflow);while (skb) { -skb_complete_tx_timestamp (skb,NULL ); +kfree_skb (skb); skb =skb_dequeue (&dp83640->tx_queue); }return ;
Greg Kroah-Hartman
maintainerPATCH 6/57 tcp: reset sk_rx_dst in tcp_disconnect()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: WANG Cong <[email protected]>
commit d747a7a51b00984127a88113cdbbc26f91e9d815 upstream.
We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect().
This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem.
--- net/ipv4/tcp.c | 2 ++ 1 file changed, 2 insertions(+)
net/ipv4/tcp.c +2 -0
@@ -2263,6 +2263,8 @@ int tcp_disconnect(struct sock *sk, inttcp_init_send_head (sk);memset (&tp->rx_opt,0 ,sizeof (tp->rx_opt));__sk_dst_reset (sk); +dst_release (sk->sk_rx_dst); + sk->sk_rx_dst =NULL ;tcp_saved_syn_free (tp);WARN_ON (inet->inet_num && !icsk->icsk_bind_hash);
Greg Kroah-Hartman
maintainerPATCH 7/57 net: prevent sign extension in dev_get_stats()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 6f64ec74515925cced6df4571638b5a099a49aae upstream.
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats().
When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned.
--- net/core/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/core/dev.c +2 -2
@@ -7052,8 +7052,8 @@ struct rtnl_link_stats64 *dev_get_stats( }else {netdev_stats_to_stats64 (storage, &dev->stats); } - storage->rx_dropped +=atomic_long_read (&dev->rx_dropped); - storage->tx_dropped +=atomic_long_read (&dev->tx_dropped); + storage->rx_dropped += (unsigned long )atomic_long_read (&dev->rx_dropped); + storage->tx_dropped += (unsigned long )atomic_long_read (&dev->tx_dropped);return storage; }EXPORT_SYMBOL (dev_get_stats);
Greg Kroah-Hartman
maintainerPATCH 8/57 bpf: prevent leaking pointer via xadd on unpriviledged
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
commit 6bdf6abc56b53103324dfd270a86580306e1a232 upstream.
Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this.
--- kernel/bpf/verifier.c | 5 +++++ 1 file changed, 5 insertions(+)
kernel/bpf/verifier.c +5 -0
@@ -754,6 +754,11 @@ static int check_xadd(struct verifier_enif (err)return err; +if (is_pointer_value (env, insn->src_reg)) { +verbose ("R%d leaks addr into mem\n" , insn->src_reg); +return -EACCES ; + } +/* check whether atomic_add can read the memory */ err =check_mem_access (env, insn->dst_reg, insn->off,BPF_SIZE (insn->code),BPF_READ ,-1 );
Greg Kroah-Hartman
maintainerPATCH 10/57 ipv6: dad: dont remove dynamic addresses if link is down
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
commit ec8add2a4c9df723c94a863b8fcd6d93c472deed upstream.
Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1):
ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800
In the same situation, this will succeed and not remove the address (2):
ip addr add 1111::12/64 dev $DEV
ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why:
* If the device is not ready:
* - keep it tentative if it is a permanent address.
* - otherwise, kill it.
We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2).
addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses.
--- net/ipv6/addrconf.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
net/ipv6/addrconf.c +11 -11
@@ -1772,17 +1772,7 @@ struct inet6_ifaddr *ipv6_get_ifaddr(strstatic void addrconf_dad_stop (struct inet6_ifaddr *ifp,int dad_failed) { -if (ifp->flags&IFA_F_PERMANENT ) { -spin_lock_bh (&ifp->lock); -addrconf_del_dad_work (ifp); - ifp->flags |=IFA_F_TENTATIVE ; -if (dad_failed) - ifp->flags |=IFA_F_DADFAILED ; -spin_unlock_bh (&ifp->lock); -if (dad_failed) -ipv6_ifa_notify (0 , ifp); -in6_ifa_put (ifp); - }else if (ifp->flags&IFA_F_TEMPORARY ) { +if (ifp->flags&IFA_F_TEMPORARY ) {struct inet6_ifaddr *ifpub;spin_lock_bh (&ifp->lock); ifpub = ifp->ifpub;
@@ -1795,6 +1785,16 @@ static void addrconf_dad_stop(struct inespin_unlock_bh (&ifp->lock); }ipv6_del_addr (ifp); + }else if (ifp->flags&IFA_F_PERMANENT || !dad_failed) { +spin_lock_bh (&ifp->lock); +addrconf_del_dad_work (ifp); + ifp->flags |=IFA_F_TENTATIVE ; +if (dad_failed) + ifp->flags |=IFA_F_DADFAILED ; +spin_unlock_bh (&ifp->lock); +if (dad_failed) +ipv6_ifa_notify (0 , ifp); +in6_ifa_put (ifp); }else {ipv6_del_addr (ifp); }
Greg Kroah-Hartman
maintainerPATCH 12/57 vrf: fix bug_on triggered by rx when destroying a vrf
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <[email protected]>
commit f630c38ef0d785101363a8992bbd4f302180f86f upstream.
When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below).
The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested.
Note that this fix doesn't prevent packets from going up when the VRF device is admin down.
[ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978
--- drivers/net/vrf.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/net/vrf.c +13 -5
@@ -733,15 +733,15 @@ static int vrf_del_slave(struct net_devistatic void vrf_dev_uninit (struct net_device *dev) {struct net_vrf *vrf =netdev_priv (dev); -struct slave_queue *queue = &vrf->queue; -struct list_head *head = &queue->all_slaves; -struct slave *slave, *next; +// struct slave_queue *queue = &vrf->queue; +// struct list_head *head = &queue->all_slaves; +// struct slave *slave, *next; vrf_rtable_destroy (vrf);vrf_rt6_destroy (vrf); -list_for_each_entry_safe (slave, next, head, list) -vrf_del_slave (dev, slave->dev); +// list_for_each_entry_safe(slave, next, head, list) +// vrf_del_slave(dev, slave->dev); free_percpu (dev->dstats); dev->dstats =NULL ;
@@ -914,6 +914,14 @@ static int vrf_validate(struct nlattr *tstatic void vrf_dellink (struct net_device *dev,struct list_head *head) { +struct net_vrf *vrf =netdev_priv (dev); +struct slave_queue *queue = &vrf->queue; +struct list_head *all_slaves = &queue->all_slaves; +struct slave *slave, *next; + +list_for_each_entry_safe (slave, next, all_slaves, list) +vrf_del_slave (dev, slave->dev); +unregister_netdevice_queue (dev, head); }
Greg Kroah-Hartman
maintainerPATCH 13/57 rds: tcp: use sock_create_lite() to create the accept socket
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sowmini Varadhan <[email protected]>
commit 0933a578cd55b02dc80f219dc8f2efb17ec61c9a upstream.
There are two problems with calling sock_create_kern() from rds_tcp_accept_one()
1. it sets up a new_sock->sk that is wasteful, because this ->sk is going to get replaced by inet_accept() in the subsequent ->accept()
2. The new_sock->sk is a leaked reference in sock_graft() which expects to find a null parent->sk
Avoid these problems by calling sock_create_lite().
--- net/rds/tcp_listen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/rds/tcp_listen.c +1 -1
@@ -78,7 +78,7 @@ int rds_tcp_accept_one(struct socket *sostruct inet_sock *inet;struct rds_tcp_connection *rs_tcp; - ret =sock_create_kern (sock_net (sock->sk), sock->sk->sk_family, + ret =sock_create_lite (sock->sk->sk_family, sock->sk->sk_type, sock->sk->sk_protocol, &new_sock);if (ret)
Greg Kroah-Hartman
maintainerPATCH 15/57 cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Dasari <[email protected]>
commit 8feb69c7bd89513be80eb19198d48f154b254021 upstream.
Buffer overread may happen as nl80211_set_station() reads 4 bytes from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without validating the size of data received when userspace sends less than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE. Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid the buffer overread.
--- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)
net/wireless/nl80211.c +1 -0
@@ -359,6 +359,7 @@ static const struct nla_policy nl80211_p [NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 }, [NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 }, [NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 }, + [NL80211_ATTR_LOCAL_MESH_POWER_MODE] = {. type = NLA_U32 }, [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 }, [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED }, [NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 },
Greg Kroah-Hartman
maintainerPATCH 16/57 cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Dasari <[email protected]>
commit d7f13f7450369281a5d0ea463cc69890a15923ae upstream.
validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy.
Validate size of each attribute before parsing to avoid potential buffer overread.
--- net/wireless/nl80211.c | 4 ++++ 1 file changed, 4 insertions(+)
net/wireless/nl80211.c +4 -0
@@ -5706,6 +5706,10 @@ static int validate_scan_freqs(struct nlstruct nlattr *attr1, *attr2;int n_channels =0 , tmp1, tmp2; +nla_for_each_nested (attr1, freqs, tmp1) +if (nla_len (attr1) !=sizeof (u32)) +return 0 ; +nla_for_each_nested (attr1, freqs, tmp1) { n_channels++;/*
Greg Kroah-Hartman
maintainerPATCH 17/57 cfg80211: Check if PMKID attribute is of expected size
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivas Dasari <[email protected]>
commit 9361df14d1cbf966409d5d6f48bb334384fbe138 upstream.
nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes.
Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID.
--- net/wireless/nl80211.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
net/wireless/nl80211.c +1 -2
@@ -302,8 +302,7 @@ static const struct nla_policy nl80211_p [NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 }, [NL80211_ATTR_PID] = { .type = NLA_U32 }, [NL80211_ATTR_4ADDR] = { .type = NLA_U8 }, - [NL80211_ATTR_PMKID] = { .type = NLA_BINARY, - .len = WLAN_PMKID_LEN }, + [NL80211_ATTR_PMKID] = { .len = WLAN_PMKID_LEN }, [NL80211_ATTR_DURATION] = { .type = NLA_U32 }, [NL80211_ATTR_COOKIE] = { .type = NLA_U64 }, [NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
Greg Kroah-Hartman
maintainerPATCH 18/57 irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suzuki K Poulose <[email protected]>
commit 866d7c1b0a3c70387646c4e455e727a58c5d465a upstream.
The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN:
[ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051]
This patch adds the check to make sure the cpu is valid.
--- drivers/irqchip/irq-gic-v3.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/irqchip/irq-gic-v3.c +3 -0
@@ -632,6 +632,9 @@ static int gic_set_affinity(struct irq_dint enabled;u64 val; +if (cpu >= nr_cpu_ids) +return -EINVAL ; +if (gic_irq_in_rdist (d))return -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 19/57 parisc: Report SIGSEGV instead of SIGBUS when running out of stack
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit 247462316f85a9e0479445c1a4223950b68ffac1 upstream.
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal.
This example shows how the kernel faults:do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000
The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal.
This patch unbreaks building the debian libsigsegv package.
--- arch/parisc/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/parisc/mm/fault.c +1 -1
@@ -303,7 +303,7 @@ bad_area:case 15 :/* Data TLB miss fault/Data page fault */ /* send SIGSEGV when outside of vma */ if (!vma || - address < vma->vm_start || address > vma->vm_end) { + address < vma->vm_start || address >= vma->vm_end) { si.si_signo =SIGSEGV ; si.si_code =SEGV_MAPERR ;break ;
Greg Kroah-Hartman
maintainerPATCH 20/57 parisc: use compat_sys_keyctl()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit b0f94efd5aa8daa8a07d7601714c2573266cd4c9 upstream.
Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it.
--- arch/parisc/kernel/syscall_table.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/parisc/kernel/syscall_table.S +1 -1
@@ -361,7 +361,7 @@ ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */ ENTRY_SAME(add_key) ENTRY_SAME(request_key) /* 265 */ - ENTRY_SAME(keyctl) + ENTRY_COMP(keyctl) ENTRY_SAME(ioprio_set) ENTRY_SAME(ioprio_get) ENTRY_SAME(inotify_init)
Greg Kroah-Hartman
maintainerPATCH 21/57 parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Bogendoerfer <[email protected]>
commit 33f9e02495d15a061f0c94ef46f5103a2d0c20f3 upstream.
Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156
task: 000000009e050000 task.stack: 000000009e04c000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001101111111100001111 Not tainted
r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8
CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2
ORIG_R28: 0000000000000200
IAOQ[0]: sba_dma_supported+0x80/0xd0
IAOQ[1]: sba_dma_supported+0x84/0xd0
RP(r2): parport_pc_probe_port+0x178/0x1200
Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction.
--- arch/parisc/include/asm/dma-mapping.h | 11 +++++++---- drivers/parisc/ccio-dma.c | 12 ++++++++++++ drivers/parisc/dino.c | 5 ++++- drivers/parisc/lba_pci.c | 6 ++++-- drivers/parisc/sba_iommu.c | 14 ++++++++++++++ 5 files changed, 41 insertions(+), 7 deletions(-)
arch/parisc/include/asm/dma-mapping.h +7 -4
@@ -39,6 +39,8 @@ struct hppa_dma_ops {** flush/purge and allocate "regular" cacheable pages for everything. */ +#define DMA_ERROR_CODE (~(dma_addr_t)0) +#ifdef CONFIG_PA11 extern struct hppa_dma_ops pcxl_dma_ops;extern struct hppa_dma_ops pcx_dma_ops;
@@ -209,12 +211,13 @@ parisc_walk_tree(struct device *dev)break ; } } -BUG_ON (!dev->platform_data);return dev->platform_data; } - -#define GET_IOC (dev) (HBA_DATA(parisc_walk_tree(dev))->iommu) - + +#define GET_IOC (dev) ({ \ + void *__pdata = parisc_walk_tree(dev); \ + __pdata ? HBA_DATA(__pdata)->iommu : NULL; \ +})#ifdef CONFIG_IOMMU_CCIO struct parisc_device ;
drivers/parisc/ccio-dma.c +12 -0
@@ -741,6 +741,8 @@ ccio_map_single(struct device *dev, voidBUG_ON (!dev); ioc =GET_IOC (dev); +if (!ioc) +return DMA_ERROR_CODE ;BUG_ON (size <=0 );
@@ -805,6 +807,10 @@ ccio_unmap_single(struct device *dev, dmBUG_ON (!dev); ioc =GET_IOC (dev); +if (!ioc) { +WARN_ON (!ioc); +return ; + }DBG_RUN ("%s() iovp 0x%lx/%x\n" , __func__, (long )iova, size);
@@ -908,6 +914,8 @@ ccio_map_sg(struct device *dev, struct sBUG_ON (!dev); ioc =GET_IOC (dev); +if (!ioc) +return 0 ;DBG_RUN_SG ("%s() START %d entries\n" , __func__, nents);
@@ -980,6 +988,10 @@ ccio_unmap_sg(struct device *dev, structBUG_ON (!dev); ioc =GET_IOC (dev); +if (!ioc) { +WARN_ON (!ioc); +return ; + }DBG_RUN_SG ("%s() START %d entries, %p,%x\n" , __func__, nents,sg_virt (sglist), sglist->length);
drivers/parisc/dino.c +4 -1
@@ -154,7 +154,10 @@ struct dino_device };/* Looks nice and keeps the compiler happy */ -#define DINO_DEV (d) ((struct dino_device *) d) +#define DINO_DEV (d) ({ \ + void *__pdata = d; \ + BUG_ON(!__pdata); \ + (struct dino_device *)__pdata; })/*
drivers/parisc/lba_pci.c +4 -2
@@ -111,8 +111,10 @@ static u32 lba_t32;/* Looks nice and keeps the compiler happy */ -#define LBA_DEV (d) ((struct lba_device *) (d)) - +#define LBA_DEV (d) ({ \ + void *__pdata = d; \ + BUG_ON(!__pdata); \ + (struct lba_device *)__pdata; })/* ** Only allow 8 subsidiary busses per LBA
drivers/parisc/sba_iommu.c +14 -0
@@ -691,6 +691,8 @@ static int sba_dma_supported( struct devreturn 0 ; ioc =GET_IOC (dev); +if (!ioc) +return 0 ;/* * check if mask is >= than the current max IO Virt Address
@@ -722,6 +724,8 @@ sba_map_single(struct device *dev, voidint pide; ioc =GET_IOC (dev); +if (!ioc) +return DMA_ERROR_CODE ;/* save offset bits */ offset = ((dma_addr_t ) (long ) addr) & ~IOVP_MASK ;
@@ -803,6 +807,10 @@ sba_unmap_single(struct device *dev, dmaDBG_RUN ("%s() iovp 0x%lx/%x\n" , __func__, (long ) iova, size); ioc =GET_IOC (dev); +if (!ioc) { +WARN_ON (!ioc); +return ; + } offset = iova & ~IOVP_MASK ; iova ^= offset;/* clear offset bits */ size += offset;
@@ -942,6 +950,8 @@ sba_map_sg(struct device *dev, struct scDBG_RUN_SG ("%s() START %d entries\n" , __func__, nents); ioc =GET_IOC (dev); +if (!ioc) +return 0 ;/* Fast path single entry scatterlists. */ if (nents ==1 ) {
@@ -1027,6 +1037,10 @@ sba_unmap_sg(struct device *dev, struct __func__, nents, sg_virt(sglist), sglist->length); ioc =GET_IOC (dev); +if (!ioc) { +WARN_ON (!ioc); +return ; + }#ifdef SBA_COLLECT_STATS ioc->usg_calls++;
Greg Kroah-Hartman
maintainerPATCH 22/57 parisc/mm: Ensure IRQs are off in switch_mm()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit 649aa24254e85bf6bd7807dd372d083707852b1f upstream.
This is because of commit f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm().
This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off().
--- arch/parisc/include/asm/mmu_context.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
arch/parisc/include/asm/mmu_context.h +13 -2
@@ -49,15 +49,26 @@ static inline void load_context(mm_contemtctl (__space_to_prot (context),8 ); } -static inline void switch_mm (struct mm_struct *prev,struct mm_struct *next,struct task_struct *tsk) +static inline void switch_mm_irqs_off (struct mm_struct *prev, +struct mm_struct *next,struct task_struct *tsk) { -if (prev != next) {mtctl (__pa (next->pgd),25 );load_context (next->context); } } +static inline void switch_mm (struct mm_struct *prev, +struct mm_struct *next,struct task_struct *tsk) +{ +unsigned long flags; + +local_irq_save (flags); +switch_mm_irqs_off (prev, next, tsk); +local_irq_restore (flags); +} +#define switch_mm_irqs_off switch_mm_irqs_off +#define deactivate_mm (tsk,mm) do { } while (0)static inline void activate_mm (struct mm_struct *prev,struct mm_struct *next)
Greg Kroah-Hartman
maintainerPATCH 23/57 tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 98dcea0cfd04e083ac74137ceb9a632604740e2d upstream.
liblockdep has been broken since commit 75dd602a5198 ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large.
That should have resulted in a compiler error, but didn't because:
- the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function
- putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array
It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly).
Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large.
--- tools/lib/lockdep/uinclude/linux/lockdep.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/lockdep/uinclude/linux/lockdep.h +1 -1
@@ -8,7 +8,7 @@#include <linux/utsname.h> #include <linux/compiler.h> -#define MAX_LOCK_DEPTH 2000UL +#define MAX_LOCK_DEPTH 255UL#define asmlinkage#define __visible
Greg Kroah-Hartman
maintainerPATCH 24/57 kernel/extable.c: mark core_kernel_text notrace
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Nowakowski <[email protected]>
commit c0d80ddab89916273cb97114889d3f337bc370ae upstream.
core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as:
Call Trace:
ftrace_return_to_handler+0x50/0x128
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
return_to_handler+0x10/0x30
return_to_handler+0x0/0x30
return_to_handler+0x0/0x30
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
(...)Mark the function notrace to avoid it being traced.
--- kernel/extable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/extable.c +1 -1
@@ -66,7 +66,7 @@ static inline int init_kernel_text(unsigreturn 0 ; } -int core_kernel_text (unsigned long addr) +int notrace core_kernel_text(unsigned long addr) {if (addr >= (unsigned long )_stext && addr < (unsigned long )_etext)
Greg Kroah-Hartman
maintainerPATCH 25/57 mm/list_lru.c: fix list_lru_count_node() to be race free
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sahitya Tummala <[email protected]>
commit 2c80cd57c74339889a8752b20862a16c28929c3a upstream.
list_lru_count_node() iterates over all memcgs to get the total number of entries on the node but it can race with memcg_drain_all_list_lrus(), which migrates the entries from a dead cgroup to another. This can return incorrect number of entries from list_lru_count_node().
Fix this by keeping track of entries per node and simply return it in list_lru_count_node().
--- include/linux/list_lru.h | 1 + mm/list_lru.c | 14 ++++++-------- 2 files changed, 7 insertions(+), 8 deletions(-)
include/linux/list_lru.h +1 -0
@@ -44,6 +44,7 @@ struct list_lru_node {/* for cgroup aware lrus points to per cgroup lists, otherwise NULL */ struct list_lru_memcg *memcg_lrus;#endif +long nr_items; }____cacheline_aligned_in_smp ;struct list_lru {
mm/list_lru.c +6 -8
@@ -117,6 +117,7 @@ bool list_lru_add(struct list_lru *lru, l =list_lru_from_kmem (nlru, item);list_add_tail (item, &l->list); l->nr_items++; + nlru->nr_items++;spin_unlock (&nlru->lock);return true; }
@@ -136,6 +137,7 @@ bool list_lru_del(struct list_lru *lru, l =list_lru_from_kmem (nlru, item);list_del_init (item); l->nr_items--; + nlru->nr_items--;spin_unlock (&nlru->lock);return true; }
@@ -183,15 +185,10 @@ EXPORT_SYMBOL_GPL(list_lru_count_one);unsigned long list_lru_count_node (struct list_lru *lru,int nid) { -long count =0 ; -int memcg_idx; +struct list_lru_node *nlru; - count +=__list_lru_count_one (lru, nid,-1 ); -if (list_lru_memcg_aware (lru)) { -for_each_memcg_cache_index (memcg_idx) - count +=__list_lru_count_one (lru, nid, memcg_idx); - } -return count; + nlru = &lru->node[nid]; +return nlru->nr_items; }EXPORT_SYMBOL_GPL (list_lru_count_node);
@@ -226,6 +223,7 @@ restart:assert_spin_locked (&nlru->lock);case LRU_REMOVED : isolated++; + nlru->nr_items--;/* * If the lru lock has been dropped, our list * traversal is now invalid and so we have to
Greg Kroah-Hartman
maintainerPATCH 26/57 fs/dcache.c: fix spin lockup issue on nlru->lock
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sahitya Tummala <[email protected]>
commit b17c070fb624cf10162cf92ea5e1ec25cd8ac176 upstream.
__list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path:
spin_bug+0x90
do_raw_spin_lock+0xfc
_raw_spin_lock+0x28
list_lru_add+0x28
dput+0x1c8
path_put+0x20
terminate_walk+0x3c
path_lookupat+0x100
filename_lookup+0x6c
user_path_at_empty+0x54
SyS_faccessat+0xd0
el0_svc_naked+0x24
This nlru->lock is acquired by another CPU in this path -
d_lru_shrink_move+0x34
dentry_lru_isolate_shrink+0x48
__list_lru_walk_one.isra.10+0x94
list_lru_walk_node+0x40
shrink_dcache_sb+0x60
do_remount_sb+0xbc
do_emergency_remount+0xb0
process_one_work+0x228
worker_thread+0x2e0
kthread+0xf4
ret_from_fork+0x10
Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again.
--- fs/dcache.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
fs/dcache.c +3 -2
@@ -1128,11 +1128,12 @@ void shrink_dcache_sb(struct super_blockLIST_HEAD (dispose); freed =list_lru_walk (&sb->s_dentry_lru, - dentry_lru_isolate_shrink, &dispose,UINT_MAX ); + dentry_lru_isolate_shrink, &dispose,1024 );this_cpu_sub (nr_dentry_unused, freed);shrink_dentry_list (&dispose); - }while (freed >0 ); +cond_resched (); + }while (list_lru_count (&sb->s_dentry_lru) >0 ); }EXPORT_SYMBOL (shrink_dcache_sb);
Greg Kroah-Hartman
maintainerPATCH 27/57 checkpatch: silence perl 5.26.0 unescaped left brace warnings
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cyril Bur <[email protected]>
commit 8d81ae05d0176da1c54aeaed697fa34be5c5575e upstream.
As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch.
Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544.
Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885.
Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374.
It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations.
--- scripts/checkpatch.pl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
scripts/checkpatch.pl +3 -3
@@ -3252,7 +3252,7 @@ sub process { $fixedline =~ s/\s*=\s*$/ = {/; fix_insert_line($fixlinenr, $fixedline); $fixedline = $line; - $fixedline =~ s/^(.\s*){\s*/$1/; + $fixedline =~ s/^(.\s*)\{\s*/$1/; fix_insert_line($fixlinenr, $fixedline); } }
@@ -3602,7 +3602,7 @@ sub process { my $fixedline = rtrim($prevrawline) . " {"; fix_insert_line($fixlinenr, $fixedline); $fixedline = $rawline; - $fixedline =~ s/^(.\s*){\s*/$1\t/; + $fixedline =~ s/^(.\s*)\{\s*/$1\t/; if ($fixedline !~ /^\+\s*$/) { fix_insert_line($fixlinenr, $fixedline); }
@@ -4091,7 +4091,7 @@ sub process { if (ERROR("SPACING", "space required before the open brace '{'\n" . $herecurr) && $fix) { - $fixed[$fixlinenr] =~ s/^(\+.*(?:do|\))){/$1 {/; + $fixed[$fixlinenr] =~ s/^(\+.*(?:do|\)))\{/$1 {/; } }
Greg Kroah-Hartman
maintainerPATCH 28/57 binfmt_elf: use ELF_ET_DYN_BASE only for PIE
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit eab09532d40090698b05a07c1c87f39fdbc5fab5 upstream.
The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.)
With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused.
For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions.
Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region).
To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs.
For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers.
Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution.
--- arch/x86/include/asm/elf.h | 13 +++++---- fs/binfmt_elf.c | 59 ++++++++++++++++++++++++++++++++++++++------- 2 files changed, 58 insertions(+), 14 deletions(-)
arch/x86/include/asm/elf.h +7 -6
@@ -245,12 +245,13 @@ extern int force_personality32;#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical -use of this is to invoke "./ld.so someprog" to test out a new version of -the loader. We need to make sure that it is out of the way of the program -that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) +/* +* This is the base location for PIE (ET_DYN with INTERP) loads. On +* 64-bit, this is raised to 4GB to leave the entire 32-bit address +* space open for things that want to use the area for 32-bit pointers. +*/ +#define ELF_ET_DYN_BASE (mmap_is_ia32() ? 0x000400000UL : \ + 0x100000000UL)/* This yields a mask that user programs can use to figure out what instruction set this CPU supports. This could be done in user space,
fs/binfmt_elf.c +51 -8
68 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 29/57 arm: move ELF_ET_DYN_BASE to 4MB
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit 6a9af90a3bcde217a1c053e135f5f43e5d5fafbd upstream.
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions.
4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided).
For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed.
--- arch/arm/include/asm/elf.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
arch/arm/include/asm/elf.h +2 -6
@@ -112,12 +112,8 @@ int dump_task_regs(struct task_struct *t#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical -use of this is to invoke "./ld.so someprog" to test out a new version of -the loader. We need to make sure that it is out of the way of the program -that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) +/* This is the base location for PIE (ET_DYN with INTERP) loads. */ +#define ELF_ET_DYN_BASE 0x400000UL/* When the program starts, a1 contains a pointer to a function to be registered with atexit, as per the SVR4 ABI. A value of 0 means we
Greg Kroah-Hartman
maintainerPATCH 30/57 arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit 02445990a96e60a67526510d8b00f7e3d14101c3 upstream.
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed.
--- arch/arm64/include/asm/elf.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/include/asm/elf.h +6 -6
@@ -120,12 +120,11 @@ typedef struct user_fpsimd_state elf_fpr#define ELF_EXEC_PAGESIZE PAGE_SIZE/* -* This is the location that an ET_DYN program is loaded if exec'ed. Typical -* use of this is to invoke "./ld.so someprog" to test out a new version of -* the loader. We need to make sure that it is out of the way of the program -* that it will "exec", and that there is sufficient room for the brk. +* This is the base location for PIE (ET_DYN with INTERP) loads. On +* 64-bit, this is raised to 4GB to leave the entire 32-bit address +* space open for things that want to use the area for 32-bit pointers. */ -#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3) +#define ELF_ET_DYN_BASE 0x100000000UL/* * When the program starts, a1 contains a pointer to a function to be
@@ -165,7 +164,8 @@ extern int arch_setup_additional_pages(s#ifdef CONFIG_COMPAT -#define COMPAT_ELF_ET_DYN_BASE (2 * TASK_SIZE_32 / 3) +/* PIE load location for compat arm. Must match ARM ELF_ET_DYN_BASE. */ +#define COMPAT_ELF_ET_DYN_BASE 0x000400000UL/* AArch32 registers. */ #define COMPAT_ELF_NGREG 18
Greg Kroah-Hartman
maintainerPATCH 31/57 powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit 47ebb09d54856500c5a5e14824781902b3bb738e upstream.
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided).
--- arch/powerpc/include/asm/elf.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
arch/powerpc/include/asm/elf.h +7 -6
@@ -23,12 +23,13 @@#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE PAGE_SIZE -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical -use of this is to invoke "./ld.so someprog" to test out a new version of -the loader. We need to make sure that it is out of the way of the program -that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0x20000000 +/* +* This is the base location for PIE (ET_DYN with INTERP) loads. On +* 64-bit, this is raised to 4GB to leave the entire 32-bit address +* space open for things that want to use the area for 32-bit pointers. +*/ +#define ELF_ET_DYN_BASE (is_32bit_task() ? 0x000400000UL : \ + 0x100000000UL)#define ELF_CORE_EFLAGS (is_elf2_task() ? 2 : 0)
Greg Kroah-Hartman
maintainerPATCH 32/57 s390: reduce ELF_ET_DYN_BASE
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit a73dc5370e153ac63718d850bddf0c9aa9d871e6 upstream.
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address.
--- arch/s390/include/asm/elf.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
arch/s390/include/asm/elf.h +7 -8
@@ -154,14 +154,13 @@ extern unsigned int vdso_enabled;#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical -use of this is to invoke "./ld.so someprog" to test out a new version of -the loader. We need to make sure that it is out of the way of the program -that it will "exec", and that there is sufficient room for the brk. 64-bit -tasks are aligned to 4GB. */ -#define ELF_ET_DYN_BASE (is_32bit_task() ? \ - (STACK_TOP / 3 * 2) : \ - (STACK_TOP / 3 * 2) & ~((1UL << 32) - 1)) +/* +* This is the base location for PIE (ET_DYN with INTERP) loads. On +* 64-bit, this is raised to 4GB to leave the entire 32-bit address +* space open for things that want to use the area for 32-bit pointers. +*/ +#define ELF_ET_DYN_BASE (is_compat_task() ? 0x000400000UL : \ + 0x100000000UL)/* This yields a mask that user programs can use to figure out what instruction set this CPU supports. */
Greg Kroah-Hartman
maintainerPATCH 33/57 exec: Limit arg stack to at most 75% of _STK_LIM
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit da029c11e6b12f321f36dac8771e833b65cec962 upstream.
To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
--- fs/exec.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
fs/exec.c +6 -5
@@ -206,8 +206,7 @@ static struct page *get_arg_page(structif (write) {unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; -unsigned long ptr_size; -struct rlimit *rlim; +unsigned long ptr_size, limit;/* * Since the stack will hold pointers to the strings, we
@@ -236,14 +235,16 @@ static struct page *get_arg_page(structreturn page;/* -* Limit to 1/4-th the stack size for the argv+env strings. +* Limit to 1/4 of the max stack size or 3/4 of _STK_LIM +* (whichever is smaller) for the argv+env strings. * This ensures that: * - the remaining binfmt code will not run out of stack space, * - the program will have a reasonable amount of stack left * to work from. */ - rlim = current->signal->rlim; -if (size >READ_ONCE (rlim[RLIMIT_STACK ].rlim_cur) /4 ) + limit = _STK_LIM /4 *3 ; + limit =min (limit,rlimit (RLIMIT_STACK ) /4 ); +if (size > limit) goto fail; }
Greg Kroah-Hartman
maintainerPATCH 34/57 vt: fix unchecked __put_user() in tioclinux ioctls
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Borowski <[email protected]>
commit 6987dc8a70976561d22450b5858fc9767788cc1c upstream.
Only read access is checked before this call.
Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future.
If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs.
--- drivers/tty/vt/vt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/tty/vt/vt.c +3 -3
@@ -2708,13 +2708,13 @@ int tioclinux(struct tty_struct *tty, un* related to the kernel should not use this. */ data =vt_get_shift_state (); - ret =__put_user (data, p); + ret =put_user (data, p);break ;case TIOCL_GETMOUSEREPORTING :console_lock ();/* May be overkill */ data =mouse_reporting ();console_unlock (); - ret =__put_user (data, p); + ret =put_user (data, p);break ;case TIOCL_SETVESABLANK :console_lock ();
@@ -2723,7 +2723,7 @@ int tioclinux(struct tty_struct *tty, unbreak ;case TIOCL_GETKMSGREDIRECT : data =vt_get_kmsg_redirect (); - ret =__put_user (data, p); + ret =put_user (data, p);break ;case TIOCL_SETKMSGREDIRECT :if (!capable (CAP_SYS_ADMIN )) {
Greg Kroah-Hartman
maintainerPATCH 35/57 mnt: In umount propagation reparent in a separate pass
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 570487d3faf2a1d8a220e6ee10f472163123d7da upstream.
It was observed that in some pathlogical cases that the current code does not unmount everything it should. After investigation it was determined that the issue is that mnt_change_mntpoint can can change which mounts are available to be unmounted during mount propagation which is wrong.
The trivial reproducer is:
$ cat ./pathological.sh
mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo
$ unshare -Urm ./pathological.sh
The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
That last mount in the output was in the propgation tree to be unmounted but was missed because the mnt_change_mountpoint changed it's parent before the walk through the mount propagation tree observed it.
--- fs/mount.h | 1 + fs/namespace.c | 1 + fs/pnode.c | 35 ++++++++++++++++++++++++++++++----- 3 files changed, 32 insertions(+), 5 deletions(-)
fs/mount.h +1 -0
@@ -57,6 +57,7 @@ struct mount {struct mnt_namespace *mnt_ns;/* containing namespace */ struct mountpoint *mnt_mp;/* where is it mounted */ struct hlist_node mnt_mp_list;/* list mounts with the same mountpoint */ +struct list_head mnt_reparent;/* reparent list entry */ #ifdef CONFIG_FSNOTIFY struct hlist_head mnt_fsnotify_marks;__u32 mnt_fsnotify_mask;
fs/namespace.c +1 -0
@@ -237,6 +237,7 @@ static struct mount *alloc_vfsmnt(constINIT_LIST_HEAD (&mnt->mnt_slave_list);INIT_LIST_HEAD (&mnt->mnt_slave);INIT_HLIST_NODE (&mnt->mnt_mp_list); +INIT_LIST_HEAD (&mnt->mnt_reparent);#ifdef CONFIG_FSNOTIFY INIT_HLIST_HEAD (&mnt->mnt_fsnotify_marks);#endif
fs/pnode.c +30 -5
@@ -441,7 +441,7 @@ static void mark_umount_candidates(struc* NOTE: unmounting 'mnt' naturally propagates to all other mounts its * parent propagates to. */ -static void __propagate_umount (struct mount *mnt) +static void __propagate_umount (struct mount *mnt,struct list_head *to_reparent) {struct mount *parent = mnt->mnt_parent;struct mount *m;
@@ -466,17 +466,38 @@ static void __propagate_umount(struct mo*/ topper =find_topper (child);if (topper) -mnt_change_mountpoint (child->mnt_parent, child->mnt_mp, - topper); +list_add_tail (&topper->mnt_reparent, to_reparent); -if (list_empty (&child->mnt_mounts)) { +if (topper ||list_empty (&child->mnt_mounts)) {list_del_init (&child->mnt_child); +list_del_init (&child->mnt_reparent); child->mnt.mnt_flags |=MNT_UMOUNT ;list_move_tail (&child->mnt_list, &mnt->mnt_list); } } } +static void reparent_mounts (struct list_head *to_reparent) +{ +while (!list_empty (to_reparent)) { +struct mount *mnt, *parent; +struct mountpoint *mp; + + mnt = list_first_entry(to_reparent, struct mount, mnt_reparent); +list_del_init (&mnt->mnt_reparent); + +/* Where should this mount be reparented to? */ + mp = mnt->mnt_mp; + parent = mnt->mnt_parent; +while (parent->mnt.mnt_flags &MNT_UMOUNT ) { + mp = parent->mnt_mp; + parent = parent->mnt_parent; + } + +mnt_change_mountpoint (parent, mp, mnt); + } +} +/* * collect all mounts that receive propagation from the mount in @list, * and return these additional mounts in the same list.
@@ -487,11 +508,15 @@ static void __propagate_umount(struct moint propagate_umount (struct list_head *list) {struct mount *mnt; +LIST_HEAD (to_reparent);list_for_each_entry_reverse (mnt, list, mnt_list)mark_umount_candidates (mnt);list_for_each_entry (mnt, list, mnt_list) -__propagate_umount (mnt); +__propagate_umount (mnt, &to_reparent); + +reparent_mounts (&to_reparent); +return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 36/57 mnt: In propgate_umount handle visiting mounts in any order
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 99b19d16471e9c3faa85cad38abc9cbbe04c6d55 upstream.
While investigating some poor umount performance I realized that in the case of overlapping mount trees where some of the mounts are locked the code has been failing to unmount all of the mounts it should have been unmounting.
This failure to unmount all of the necessary
mounts can be reproduced with:
$ cat locked_mounts_test.sh
mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b
mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10
mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20
mount --rbind /mnt/b /mnt/b/10/20
unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi' sleep 1
umount -l /mnt/b
wait %%
$ unshare -Urm ./locked_mounts_test.sh
This failure is corrected by removing the prepass that marks mounts that may be umounted.
A first pass is added that umounts mounts if possible and if not sets mount mark if they could be unmounted if they weren't locked and adds them to a list to umount possibilities. This first pass reconsiders the mounts parent if it is on the list of umount possibilities, ensuring that information of umoutability will pass from child to mount parent.
A second pass then walks through all mounts that are umounted and processes their children unmounting them or marking them for reparenting.
A last pass cleans up the state on the mounts that could not be umounted and if applicable reparents them to their first parent that remained mounted.
While a bit longer than the old code this code is much more robust as it allows information to flow up from the leaves and down from the trunk making the order in which mounts are encountered in the umount propgation tree irrelevant.
--- fs/mount.h | 2 fs/namespace.c | 2 fs/pnode.c | 150 +++++++++++++++++++++++++++++++++------------------------ 3 files changed, 91 insertions(+), 63 deletions(-)
fs/mount.h +1 -1
@@ -57,7 +57,7 @@ struct mount {struct mnt_namespace *mnt_ns;/* containing namespace */ struct mountpoint *mnt_mp;/* where is it mounted */ struct hlist_node mnt_mp_list;/* list mounts with the same mountpoint */ -struct list_head mnt_reparent;/* reparent list entry */ +struct list_head mnt_umounting;/* list entry for umount propagation */ #ifdef CONFIG_FSNOTIFY struct hlist_head mnt_fsnotify_marks;__u32 mnt_fsnotify_mask;
fs/namespace.c +1 -1
@@ -237,7 +237,7 @@ static struct mount *alloc_vfsmnt(constINIT_LIST_HEAD (&mnt->mnt_slave_list);INIT_LIST_HEAD (&mnt->mnt_slave);INIT_HLIST_NODE (&mnt->mnt_mp_list); -INIT_LIST_HEAD (&mnt->mnt_reparent); +INIT_LIST_HEAD (&mnt->mnt_umounting);#ifdef CONFIG_FSNOTIFY INIT_HLIST_HEAD (&mnt->mnt_fsnotify_marks);#endif
fs/pnode.c +89 -61
190 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 37/57 mnt: Make propagate_umount less slow for overlapping mount propagation trees
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 296990deb389c7da21c78030376ba244dc1badf5 upstream.
Andrei Vagin pointed out that time to executue propagate_umount can go non-linear (and take a ludicrious amount of time) when the mount propogation trees of the mounts to be unmunted by a lazy unmount overlap.
Make the walk of the mount propagation trees nearly linear by remembering which mounts have already been visited, allowing subsequent walks to detect when walking a mount propgation tree or a subtree of a mount propgation tree would be duplicate work and to skip them entirely.
Walk the list of mounts whose propgatation trees need to be traversed from the mount highest in the mount tree to mounts lower in the mount tree so that odds are higher that the code will walk the largest trees first, allowing later tree walks to be skipped entirely.
Add cleanup_umount_visitation to remover the code's memory of which mounts have been visited.
Add the functions last_slave and skip_propagation_subtree to allow skipping appropriate parts of the mount propagation tree without needing to change the logic of the rest of the code.
A script to generate overlapping mount propagation trees:
$ cat runs.h set -e mount -t tmpfs zdtm /mnt mkdir -p /mnt/1 /mnt/2 mount -t tmpfs zdtm /mnt/1 mount --make-shared /mnt/1 mkdir /mnt/1/1
iteration=10
if [ -n "$1" ] ; then
iteration=$1
fi
for i in $(seq $iteration); do
mount --bind /mnt/1/1 /mnt/1/1
done
mount --rbind /mnt/1 /mnt/2
TIMEFORMAT='%Rs'
nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 ))
echo -n "umount -l /mnt/1 -> $nr "
time umount -l /mnt/1
nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l ) time umount -l /mnt/2
$ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done
Here are the performance numbers with and without the patch:
mhash | 8192 | 8192 | 1048576 | 1048576
mounts | before | after | before | after
------------------------------------------------
1025 | 0.040s | 0.016s | 0.038s | 0.019s
2049 | 0.094s | 0.017s | 0.080s | 0.018s
4097 | 0.243s | 0.019s | 0.206s | 0.023s
8193 | 1.202s | 0.028s | 1.562s | 0.032s
16385 | 9.635s | 0.036s | 9.952s | 0.041s
32769 | 60.928s | 0.063s | 44.321s | 0.064s
65537 | | 0.097s | | 0.097s
131073 | | 0.233s | | 0.176s
262145 | | 0.653s | | 0.344s
524289 | | 2.305s | | 0.735s1048577 | | 7.107s | | 2.603s
Andrei Vagin reports fixing the performance problem is part of the work to fix CVE-2016-6213.
--- fs/pnode.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 62 insertions(+), 1 deletion(-)
fs/pnode.c +62 -1
@@ -24,6 +24,11 @@ static inline struct mount *first_slave( return list_entry(p->mnt_slave_list.next, struct mount, mnt_slave); } +static inline struct mount *last_slave (struct mount *p) +{ + return list_entry(p->mnt_slave_list.prev, struct mount, mnt_slave); +} +static inline struct mount *next_slave (struct mount *p) { return list_entry(p->mnt_slave.next, struct mount, mnt_slave);
@@ -164,6 +169,19 @@ static struct mount *propagation_next(st } } +static struct mount *skip_propagation_subtree (struct mount *m, +struct mount *origin) +{ +/* +* Advance m such that propagation_next will not return +* the slaves of m. +*/ +if (!IS_MNT_NEW (m) && !list_empty (&m->mnt_slave_list)) + m =last_slave (m); + +return m; +} +static struct mount *next_group (struct mount *m,struct mount *origin) {while (1 ) {
@@ -507,6 +525,15 @@ static void restore_mounts(struct list_h } } +static void cleanup_umount_visitations (struct list_head *visited) +{ +while (!list_empty (visited)) { +struct mount *mnt = + list_first_entry(visited, struct mount, mnt_umounting); +list_del_init (&mnt->mnt_umounting); + } +} +/* * collect all mounts that receive propagation from the mount in @list, * and return these additional mounts in the same list.
@@ -519,11 +546,23 @@ int propagate_umount(struct list_head *lstruct mount *mnt;LIST_HEAD (to_restore);LIST_HEAD (to_umount); +LIST_HEAD (visited); -list_for_each_entry (mnt, list, mnt_list) { +/* Find candidates for unmounting */ +list_for_each_entry_reverse (mnt, list, mnt_list) {struct mount *parent = mnt->mnt_parent;struct mount *m; +/* +* If this mount has already been visited it is known that it's +* entire peer group and all of their slaves in the propagation +* tree for the mountpoint has already been visited and there is +* no need to visit them again. +*/ +if (!list_empty (&mnt->mnt_umounting)) +continue ; + +list_add_tail (&mnt->mnt_umounting, &visited);for (m =propagation_next (parent, parent); m; m =propagation_next (m, parent)) { struct mount *child = __lookup_mnt(&m->mnt,
@@ -531,6 +570,27 @@ int propagate_umount(struct list_head *lif (!child)continue ; +if (!list_empty (&child->mnt_umounting)) { +/* +* If the child has already been visited it is +* know that it's entire peer group and all of +* their slaves in the propgation tree for the +* mountpoint has already been visited and there +* is no need to visit this subtree again. +*/ + m =skip_propagation_subtree (m, parent); +continue ; + }else if (child->mnt.mnt_flags &MNT_UMOUNT ) { +/* +* We have come accross an partially unmounted +* mount in list that has not been visited yet. +* Remember it has been visited and continue +* about our merry way. +*/ +list_add_tail (&child->mnt_umounting, &visited); +continue ; + } +/* Check the child and parents while progress is made */ while (__propagate_umount (child, &to_umount, &to_restore)) {
@@ -544,6 +604,7 @@ int propagate_umount(struct list_head *lumount_list (&to_umount, &to_restore);restore_mounts (&to_restore); +cleanup_umount_visitations (&visited);list_splice_tail (&to_umount, list);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 38/57 selftests/capabilities: Fix the test_execve test
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 796a3bae2fba6810427efdb314a1c126c9490fb3 upstream.
test_execve does rather odd mount manipulations to safely create temporary setuid and setgid executables that aren't visible to the rest of the system. Those executables end up in the test's cwd, but that cwd is MNT_DETACHed.
The core namespace code considers MNT_DETACHed trees to belong to no mount namespace at all and, in general, MNT_DETACHed trees are only barely function. This interacted with commit 380cf5ba6b0a ("fs:
Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to act as though they're nosuid, breaking the test.
Fix it by just not detaching the tree. It's still in a private mount namespace and is therefore still invisible to the rest of the system (except via /proc, and the same nosuid logic will protect all other programs on the system from believing in test_execve's setuid bits).
While we're at it, fix some blatant whitespace problems.
--- tools/testing/selftests/capabilities/test_execve.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
tools/testing/selftests/capabilities/test_execve.c +2 -5
@@ -138,9 +138,6 @@ static void chdir_to_tmpfs(void)if (chdir (cwd) !=0 )err (1 ,"chdir to private tmpfs" ); - -if (umount2 ("." ,MNT_DETACH ) !=0 ) -err (1 ,"detach private tmpfs" ); }static void copy_fromat_to (int fromfd,const char *fromname,const char *toname)
@@ -248,7 +245,7 @@ static int do_tests(int uid, const charerr (1 ,"chown" );if (chmod ("validate_cap_sgidnonroot" ,S_ISGID |0710 ) !=0 )err (1 ,"chmod" ); -} + }capng_get_caps_process ();
@@ -384,7 +381,7 @@ static int do_tests(int uid, const char }else {printf ("[RUN]\tNon-root +ia, sgidnonroot => i\n" );exec_other_validate_cap ("./validate_cap_sgidnonroot" , - false, false, true, false); + false, false, true, false);if (fork_wait ()) {printf ("[RUN]\tNon-root +ia, sgidroot => i\n" );
Greg Kroah-Hartman
maintainerPATCH 39/57 tpm: Get rid of chip->pdev
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <[email protected]>
commit 8cfffc9d4d3786d3b496a021d7224e06328bac7d upstream.
This is a hold over from before the struct device conversion.
- All prints should be using &chip->dev, which is the Linux standard. This changes prints to use tpm0 as the device name, not the PnP/etc ID.
- The few places involving sysfs/modules that really do need the parent just use chip->dev.parent instead
- We no longer need to get_device(pdev) in any places since it is no longer used by any of the code. The kref on the parent is held by the device core during device_add and dropped in device_del
--- drivers/char/tpm/tpm-chip.c | 15 ++++++--------- drivers/char/tpm/tpm-dev.c | 4 +--- drivers/char/tpm/tpm-interface.c | 30 ++++++++++++++++-------------- drivers/char/tpm/tpm-sysfs.c | 6 +++--- drivers/char/tpm/tpm.h | 3 +-- drivers/char/tpm/tpm2-cmd.c | 8 ++++---- drivers/char/tpm/tpm_atmel.c | 14 +++++++------- drivers/char/tpm/tpm_i2c_atmel.c | 16 ++++++++-------- drivers/char/tpm/tpm_i2c_infineon.c | 6 +++--- drivers/char/tpm/tpm_i2c_nuvoton.c | 22 +++++++++++----------- drivers/char/tpm/tpm_infineon.c | 22 +++++++++++----------- drivers/char/tpm/tpm_nsc.c | 20 ++++++++++---------- drivers/char/tpm/tpm_tis.c | 16 ++++++++-------- 13 files changed, 89 insertions(+), 93 deletions(-)
drivers/char/tpm/tpm-chip.c +6 -9
@@ -49,7 +49,7 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->pdev->driver->owner)) { +if (try_module_get (pos->dev.parent->driver->owner)) { chip = pos;break ; }
@@ -112,13 +112,11 @@ struct tpm_chip *tpmm_chip_alloc(structscnprintf (chip->devname,sizeof (chip->devname),"tpm%d" , chip->dev_num); - chip->pdev = dev; -dev_set_drvdata (dev, chip); chip->dev.class = tpm_class; chip->dev.release = tpm_dev_release; - chip->dev.parent = chip->pdev; + chip->dev.parent = dev;#ifdef CONFIG_ACPI chip->dev.groups = chip->groups;#endif
@@ -133,7 +131,7 @@ struct tpm_chip *tpmm_chip_alloc(structdevice_initialize (&chip->dev);cdev_init (&chip->cdev, &tpm_fops); - chip->cdev.owner = chip->pdev->driver->owner; + chip->cdev.owner = dev->driver->owner; chip->cdev.kobj.parent = &chip->dev.kobj;devm_add_action (dev, (void (*)(void *)) put_device, &chip->dev);
@@ -236,9 +234,8 @@ int tpm_chip_register(struct tpm_chip *c chip->flags |=TPM_CHIP_FLAG_REGISTERED ;if (!(chip->flags &TPM_CHIP_FLAG_TPM2 )) { - rc =__compat_only_sysfs_link_entry_to_kobj (&chip->pdev->kobj, - &chip->dev.kobj, -"ppi" ); + rc =__compat_only_sysfs_link_entry_to_kobj ( + &chip->dev.parent->kobj, &chip->dev.kobj,"ppi" );if (rc && rc != -ENOENT ) {tpm_chip_unregister (chip);return rc;
@@ -273,7 +270,7 @@ void tpm_chip_unregister(struct tpm_chipsynchronize_rcu ();if (!(chip->flags &TPM_CHIP_FLAG_TPM2 )) -sysfs_remove_link (&chip->pdev->kobj,"ppi" ); +sysfs_remove_link (&chip->dev.parent->kobj,"ppi" );tpm1_chip_unregister (chip);tpm_del_char_device (chip);
drivers/char/tpm/tpm-dev.c +1 -3
@@ -61,7 +61,7 @@ static int tpm_open(struct inode *inode,* by the check of is_open variable, which is protected * by driver_lock. */ if (test_and_set_bit (0 , &chip->is_open)) { -dev_dbg (chip->pdev,"Another process owns this TPM\n" ); +dev_dbg (&chip->dev,"Another process owns this TPM\n" );return -EBUSY ; }
@@ -79,7 +79,6 @@ static int tpm_open(struct inode *inode,INIT_WORK (&priv->work, timeout_work); file->private_data = priv; -get_device (chip->pdev);return 0 ; }
@@ -166,7 +165,6 @@ static int tpm_release(struct inode *ino file->private_data =NULL ;atomic_set (&priv->data_pending,0 );clear_bit (0 , &priv->chip->is_open); -put_device (priv->chip->pdev);kfree (priv);return 0 ; }
drivers/char/tpm/tpm-interface.c +16 -14
@@ -343,7 +343,7 @@ ssize_t tpm_transmit(struct tpm_chip *chif (count ==0 )return -ENODATA ;if (count > bufsiz) { -dev_err (chip->pdev, +dev_err (&chip->dev,"invalid count value %x %zx\n" , count, bufsiz);return -E2BIG ; }
@@ -353,7 +353,7 @@ ssize_t tpm_transmit(struct tpm_chip *ch rc = chip->ops->send (chip, (u8 *) buf, count);if (rc <0 ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"tpm_transmit: tpm_send: error %zd\n" , rc); goto out; }
@@ -372,7 +372,7 @@ ssize_t tpm_transmit(struct tpm_chip *ch goto out_recv;if (chip->ops->req_canceled (chip, status)) { -dev_err (chip->pdev,"Operation Canceled\n" ); +dev_err (&chip->dev,"Operation Canceled\n" ); rc = -ECANCELED ; goto out; }
@@ -382,14 +382,14 @@ ssize_t tpm_transmit(struct tpm_chip *ch }while (time_before (jiffies, stop)); chip->ops->cancel (chip); -dev_err (chip->pdev,"Operation Timed out\n" ); +dev_err (&chip->dev,"Operation Timed out\n" ); rc = -ETIME ; goto out; out_recv: rc = chip->ops->recv (chip, (u8 *) buf, bufsiz);if (rc <0 ) -dev_err (chip->pdev, +dev_err (&chip->dev,"tpm_transmit: tpm_recv: error %zd\n" , rc); out:if (!(flags &TPM_TRANSMIT_UNLOCKED ))
@@ -416,7 +416,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip err =be32_to_cpu (header->return_code);if (err !=0 && desc) -dev_err (chip->pdev,"A TPM error (%d) occurred %s\n" , err, +dev_err (&chip->dev,"A TPM error (%d) occurred %s\n" , err, desc);return err;
@@ -514,7 +514,7 @@ int tpm_get_timeouts(struct tpm_chip *chif (rc ==TPM_ERR_INVALID_POSTINIT ) {/* The TPM is not started, we are the first to talk to it. Execute a startup command. */ -dev_info (chip->pdev,"Issuing TPM_STARTUP" ); +dev_info (&chip->dev,"Issuing TPM_STARTUP" );if (tpm_startup (chip,TPM_ST_CLEAR ))return rc;
@@ -526,7 +526,7 @@ int tpm_get_timeouts(struct tpm_chip *ch 0, NULL); }if (rc) { -dev_err (chip->pdev, +dev_err (&chip->dev,"A TPM error (%zd) occurred attempting to determine the timeouts\n" , rc); goto duration;
@@ -565,7 +565,7 @@ int tpm_get_timeouts(struct tpm_chip *ch/* Report adjusted timeouts */ if (chip->vendor.timeout_adjusted) { - dev_info(chip->pdev, + dev_info(&chip->dev, HW_ERR "Adjusting reported timeouts: A %lu->%luus B %lu->%luus C %lu->%luus D %lu->%luus\n", old_timeout[0], new_timeout[0], old_timeout[1], new_timeout[1],
@@ -612,7 +612,7 @@ duration: chip->vendor.duration[TPM_MEDIUM ] *=1000 ; chip->vendor.duration[TPM_LONG ] *=1000 ; chip->vendor.duration_adjusted = true; -dev_info (chip->pdev,"Adjusting TPM timeout parameters." ); +dev_info (&chip->dev,"Adjusting TPM timeout parameters." ); }return 0 ; }
@@ -802,7 +802,9 @@ int tpm_do_selftest(struct tpm_chip *chi* around 300ms while the self test is ongoing, keep trying * until the self test duration expires. */ if (rc == -ETIME ) { -dev_info (chip->pdev,HW_ERR "TPM command timed out during continue self test" ); +dev_info ( + &chip->dev,HW_ERR +"TPM command timed out during continue self test" );msleep (delay_msec);continue ; }
@@ -812,7 +814,7 @@ int tpm_do_selftest(struct tpm_chip *chi rc =be32_to_cpu (cmd.header.out.return_code);if (rc ==TPM_ERR_DISABLED || rc ==TPM_ERR_DEACTIVATED ) { -dev_info (chip->pdev, +dev_info (&chip->dev,"TPM is disabled/deactivated (0x%X)\n" , rc);/* TPM is disabled and/or deactivated; driver can * proceed and TPM does handle commands for
@@ -966,10 +968,10 @@ int tpm_pm_suspend(struct device *dev) }if (rc) -dev_err (chip->pdev, +dev_err (&chip->dev,"Error (%d) sending savestate before suspend\n" , rc);else if (try >0 ) -dev_warn (chip->pdev,"TPM savestate took %dms\n" , +dev_warn (&chip->dev,"TPM savestate took %dms\n" , try *TPM_TIMEOUT_RETRY );return rc;
drivers/char/tpm/tpm-sysfs.c +3 -3
@@ -284,16 +284,16 @@ static const struct attribute_group tpm_int tpm_sysfs_add_device (struct tpm_chip *chip) {int err; - err =sysfs_create_group (&chip->pdev->kobj, + err =sysfs_create_group (&chip->dev.parent->kobj, &tpm_dev_group);if (err) -dev_err (chip->pdev, +dev_err (&chip->dev,"failed to create sysfs attributes, %d\n" , err);return err; }void tpm_sysfs_del_device (struct tpm_chip *chip) { -sysfs_remove_group (&chip->pdev->kobj, &tpm_dev_group); +sysfs_remove_group (&chip->dev.parent->kobj, &tpm_dev_group); }
drivers/char/tpm/tpm.h +1 -2
@@ -171,7 +171,6 @@ enum tpm_chip_flags { };struct tpm_chip { -struct device *pdev;/* Device stuff */ struct device dev;struct cdev cdev;
@@ -203,7 +202,7 @@ struct tpm_chip {static inline void tpm_chip_put (struct tpm_chip *chip) { -module_put (chip->pdev->driver->owner); +module_put (chip->dev.parent->driver->owner); }static inline int tpm_read_index (int base,int index)
drivers/char/tpm/tpm2-cmd.c +4 -4
@@ -570,7 +570,7 @@ static void tpm2_flush_context_cmd(struc rc =tpm_buf_init (&buf,TPM2_ST_NO_SESSIONS ,TPM2_CC_FLUSH_CONTEXT );if (rc) { -dev_warn (chip->pdev,"0x%08x was not flushed, out of memory\n" , +dev_warn (&chip->dev,"0x%08x was not flushed, out of memory\n" , handle);return ; }
@@ -580,7 +580,7 @@ static void tpm2_flush_context_cmd(struc rc =tpm_transmit_cmd (chip, buf.data,PAGE_SIZE , flags,"flushing context" );if (rc) -dev_warn (chip->pdev,"0x%08x was not flushed, rc=%d\n" , handle, +dev_warn (&chip->dev,"0x%08x was not flushed, rc=%d\n" , handle, rc);tpm_buf_destroy (&buf);
@@ -753,7 +753,7 @@ void tpm2_shutdown(struct tpm_chip *chip* except print the error code on a system failure. */ if (rc <0 ) -dev_warn (chip->pdev,"transmit returned %d while stopping the TPM" , +dev_warn (&chip->dev,"transmit returned %d while stopping the TPM" , rc); }EXPORT_SYMBOL_GPL (tpm2_shutdown);
@@ -820,7 +820,7 @@ static int tpm2_start_selftest(struct tp* immediately. This is a workaround for that. */ if (rc ==TPM2_RC_TESTING ) { -dev_warn (chip->pdev,"Got RC_TESTING, ignoring\n" ); +dev_warn (&chip->dev,"Got RC_TESTING, ignoring\n" ); rc =0 ; }
drivers/char/tpm/tpm_atmel.c +7 -7
@@ -49,7 +49,7 @@ static int tpm_atml_recv(struct tpm_chipfor (i =0 ; i <6 ; i++) { status =ioread8 (chip->vendor.iobase +1 );if ((status &ATML_STATUS_DATA_AVAIL ) ==0 ) { -dev_err (chip->pdev,"error reading header\n" ); +dev_err (&chip->dev,"error reading header\n" );return -EIO ; } *buf++ =ioread8 (chip->vendor.iobase);
@@ -60,12 +60,12 @@ static int tpm_atml_recv(struct tpm_chip size =be32_to_cpu (*native_size);if (count < size) { -dev_err (chip->pdev, +dev_err (&chip->dev,"Recv size(%d) less than available space\n" , size);for (; i < size; i++) {/* clear the waiting data anyway */ status =ioread8 (chip->vendor.iobase +1 );if ((status &ATML_STATUS_DATA_AVAIL ) ==0 ) { -dev_err (chip->pdev,"error reading data\n" ); +dev_err (&chip->dev,"error reading data\n" );return -EIO ; } }
@@ -76,7 +76,7 @@ static int tpm_atml_recv(struct tpm_chipfor (; i < size; i++) { status =ioread8 (chip->vendor.iobase +1 );if ((status &ATML_STATUS_DATA_AVAIL ) ==0 ) { -dev_err (chip->pdev,"error reading data\n" ); +dev_err (&chip->dev,"error reading data\n" );return -EIO ; } *buf++ =ioread8 (chip->vendor.iobase);
@@ -86,7 +86,7 @@ static int tpm_atml_recv(struct tpm_chip status =ioread8 (chip->vendor.iobase +1 );if (status &ATML_STATUS_DATA_AVAIL ) { -dev_err (chip->pdev,"data available is stuck\n" ); +dev_err (&chip->dev,"data available is stuck\n" );return -EIO ; }
@@ -97,9 +97,9 @@ static int tpm_atml_send(struct tpm_chip {int i; -dev_dbg (chip->pdev,"tpm_atml_send:\n" ); +dev_dbg (&chip->dev,"tpm_atml_send:\n" );for (i =0 ; i < count; i++) { -dev_dbg (chip->pdev,"%d 0x%x(%d)\n" , i, buf[i], buf[i]); +dev_dbg (&chip->dev,"%d 0x%x(%d)\n" , i, buf[i], buf[i]);iowrite8 (buf[i], chip->vendor.iobase); }
drivers/char/tpm/tpm_i2c_atmel.c +8 -8
@@ -52,7 +52,7 @@ struct priv_data {static int i2c_atmel_send (struct tpm_chip *chip,u8 *buf,size_t len) {struct priv_data *priv = chip->vendor.priv; -struct i2c_client *client =to_i2c_client (chip->pdev); +struct i2c_client *client =to_i2c_client (chip->dev.parent);s32 status; priv->len =0 ;
@@ -62,7 +62,7 @@ static int i2c_atmel_send(struct tpm_chi status =i2c_master_send (client, buf, len); -dev_dbg (chip->pdev, +dev_dbg (&chip->dev,"%s(buf=%*ph len=%0zx) -> sts=%d\n" , __func__, (int )min_t (size_t,64 , len), buf, len, status);return status;
@@ -71,7 +71,7 @@ static int i2c_atmel_send(struct tpm_chistatic int i2c_atmel_recv (struct tpm_chip *chip,u8 *buf,size_t count) {struct priv_data *priv = chip->vendor.priv; -struct i2c_client *client =to_i2c_client (chip->pdev); +struct i2c_client *client =to_i2c_client (chip->dev.parent);struct tpm_output_header *hdr = (struct tpm_output_header *)priv->buffer;u32 expected_len;
@@ -88,7 +88,7 @@ static int i2c_atmel_recv(struct tpm_chireturn -ENOMEM ;if (priv->len >= expected_len) { -dev_dbg (chip->pdev, +dev_dbg (&chip->dev,"%s early(buf=%*ph count=%0zx) -> ret=%d\n" , __func__, (int )min_t (size_t,64 , expected_len), buf, count, expected_len);
@@ -97,7 +97,7 @@ static int i2c_atmel_recv(struct tpm_chi } rc =i2c_master_recv (client, buf, expected_len); -dev_dbg (chip->pdev, +dev_dbg (&chip->dev,"%s reread(buf=%*ph count=%0zx) -> ret=%d\n" , __func__, (int )min_t (size_t,64 , expected_len), buf, count, expected_len);
@@ -106,13 +106,13 @@ static int i2c_atmel_recv(struct tpm_chistatic void i2c_atmel_cancel (struct tpm_chip *chip) { -dev_err (chip->pdev,"TPM operation cancellation was requested, but is not supported" ); +dev_err (&chip->dev,"TPM operation cancellation was requested, but is not supported" ); }static u8 i2c_atmel_read_status (struct tpm_chip *chip) {struct priv_data *priv = chip->vendor.priv; -struct i2c_client *client =to_i2c_client (chip->pdev); +struct i2c_client *client =to_i2c_client (chip->dev.parent);int rc;/* The TPM fails the I2C read until it is ready, so we do the entire
@@ -125,7 +125,7 @@ static u8 i2c_atmel_read_status(struct t/* Once the TPM has completed the command the command remains readable * until another command is issued. */ rc =i2c_master_recv (client, priv->buffer,sizeof (priv->buffer)); -dev_dbg (chip->pdev, +dev_dbg (&chip->dev,"%s: sts=%d" , __func__, rc);if (rc <=0 )return 0 ;
drivers/char/tpm/tpm_i2c_infineon.c +3 -3
@@ -446,7 +446,7 @@ static int tpm_tis_i2c_recv(struct tpm_c/* read first 10 bytes, including tag, paramsize, and result */ size =recv_data (chip, buf,TPM_HEADER_SIZE );if (size <TPM_HEADER_SIZE ) { -dev_err (chip->pdev,"Unable to read header\n" ); +dev_err (&chip->dev,"Unable to read header\n" ); goto out; }
@@ -459,14 +459,14 @@ static int tpm_tis_i2c_recv(struct tpm_c size +=recv_data (chip, &buf[TPM_HEADER_SIZE ], expected -TPM_HEADER_SIZE );if (size < expected) { -dev_err (chip->pdev,"Unable to read remainder of result\n" ); +dev_err (&chip->dev,"Unable to read remainder of result\n" ); size = -ETIME ; goto out; }wait_for_stat (chip,TPM_STS_VALID , chip->vendor.timeout_c, &status);if (status &TPM_STS_DATA_AVAIL ) {/* retry? */ -dev_err (chip->pdev,"Error left over data\n" ); +dev_err (&chip->dev,"Error left over data\n" ); size = -EIO ; goto out; }
drivers/char/tpm/tpm_i2c_nuvoton.c +11 -11
@@ -96,13 +96,13 @@ static s32 i2c_nuvoton_write_buf(struct/* read TPM_STS register */ static u8 i2c_nuvoton_read_status (struct tpm_chip *chip) { -struct i2c_client *client =to_i2c_client (chip->pdev); +struct i2c_client *client =to_i2c_client (chip->dev.parent);s32 status;u8 data; status =i2c_nuvoton_read_buf (client,TPM_STS ,1 , &data);if (status <=0 ) { -dev_err (chip->pdev,"%s() error return %d\n" , __func__, +dev_err (&chip->dev,"%s() error return %d\n" , __func__, status); data =TPM_STS_ERR_VAL ; }
@@ -127,13 +127,13 @@ static s32 i2c_nuvoton_write_status(stru/* write commandReady to TPM_STS register */ static void i2c_nuvoton_ready (struct tpm_chip *chip) { -struct i2c_client *client =to_i2c_client (chip->pdev); +struct i2c_client *client =to_i2c_client (chip->dev.parent);s32 status;/* this causes the current command to be aborted */ status =i2c_nuvoton_write_status (client,TPM_STS_COMMAND_READY );if (status <0 ) -dev_err (chip->pdev, +dev_err (&chip->dev,"%s() fail to write TPM_STS.commandReady\n" , __func__); }
@@ -212,7 +212,7 @@ static int i2c_nuvoton_wait_for_stat(strreturn 0 ; }while (time_before (jiffies, stop)); } -dev_err (chip->pdev,"%s(%02x, %02x) -> timeout\n" , __func__, mask, +dev_err (&chip->dev,"%s(%02x, %02x) -> timeout\n" , __func__, mask, value);return -ETIMEDOUT ; }
@@ -240,7 +240,7 @@ static int i2c_nuvoton_recv_data(struct &chip->vendor.read_queue) == 0) { burst_count =i2c_nuvoton_get_burstcount (client, chip);if (burst_count <0 ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"%s() fail to read burstCount=%d\n" , __func__, burst_count);return -EIO ;
@@ -249,12 +249,12 @@ static int i2c_nuvoton_recv_data(struct rc =i2c_nuvoton_read_buf (client,TPM_DATA_FIFO_R , bytes2read, &buf[size]);if (rc <0 ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"%s() fail on i2c_nuvoton_read_buf()=%d\n" , __func__, rc);return -EIO ; } -dev_dbg (chip->pdev,"%s(%d):" , __func__, bytes2read); +dev_dbg (&chip->dev,"%s(%d):" , __func__, bytes2read); size += bytes2read; }
@@ -264,7 +264,7 @@ static int i2c_nuvoton_recv_data(struct/* Read TPM command results */ static int i2c_nuvoton_recv (struct tpm_chip *chip,u8 *buf,size_t count) { -struct device *dev = chip->pdev; +struct device *dev = chip->dev.parent;struct i2c_client *client =to_i2c_client (dev);s32 rc;int expected, status, burst_count, retries, size =0 ;
@@ -334,7 +334,7 @@ static int i2c_nuvoton_recv(struct tpm_cbreak ; }i2c_nuvoton_ready (chip); -dev_dbg (chip->pdev,"%s() -> %d\n" , __func__, size); +dev_dbg (&chip->dev,"%s() -> %d\n" , __func__, size);return size; }
@@ -347,7 +347,7 @@ static int i2c_nuvoton_recv(struct tpm_c*/ static int i2c_nuvoton_send (struct tpm_chip *chip,u8 *buf,size_t len) { -struct device *dev = chip->pdev; +struct device *dev = chip->dev.parent;struct i2c_client *client =to_i2c_client (dev);u32 ordinal;size_t count =0 ;
drivers/char/tpm/tpm_infineon.c +11 -11
@@ -195,9 +195,9 @@ static int wait(struct tpm_chip *chip, i }if (i ==TPM_MAX_TRIES ) {/* timeout occurs */ if (wait_for_bit ==STAT_XFE ) -dev_err (chip->pdev,"Timeout in wait(STAT_XFE)\n" ); +dev_err (&chip->dev,"Timeout in wait(STAT_XFE)\n" );if (wait_for_bit ==STAT_RDA ) -dev_err (chip->pdev,"Timeout in wait(STAT_RDA)\n" ); +dev_err (&chip->dev,"Timeout in wait(STAT_RDA)\n" );return -EIO ; }return 0 ;
@@ -220,7 +220,7 @@ static void wait_and_send(struct tpm_chistatic void tpm_wtx (struct tpm_chip *chip) { number_of_wtx++; -dev_info (chip->pdev,"Granting WTX (%02d / %02d)\n" , +dev_info (&chip->dev,"Granting WTX (%02d / %02d)\n" , number_of_wtx,TPM_MAX_WTX_PACKAGES );wait_and_send (chip,TPM_VL_VER );wait_and_send (chip,TPM_CTRL_WTX );
@@ -231,7 +231,7 @@ static void tpm_wtx(struct tpm_chip *chistatic void tpm_wtx_abort (struct tpm_chip *chip) { -dev_info (chip->pdev,"Aborting WTX\n" ); +dev_info (&chip->dev,"Aborting WTX\n" );wait_and_send (chip,TPM_VL_VER );wait_and_send (chip,TPM_CTRL_WTX_ABORT );wait_and_send (chip,0x00 );
@@ -257,7 +257,7 @@ recv_begin: }if (buf[0 ] !=TPM_VL_VER ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"Wrong transport protocol implementation!\n" );return -EIO ; }
@@ -272,7 +272,7 @@ recv_begin: }if ((size ==0x6D00 ) && (buf[1 ] ==0x80 )) { -dev_err (chip->pdev,"Error handling on vendor layer!\n" ); +dev_err (&chip->dev,"Error handling on vendor layer!\n" );return -EIO ; }
@@ -284,7 +284,7 @@ recv_begin: }if (buf[1 ] ==TPM_CTRL_WTX ) { -dev_info (chip->pdev,"WTX-package received\n" ); +dev_info (&chip->dev,"WTX-package received\n" );if (number_of_wtx <TPM_MAX_WTX_PACKAGES ) {tpm_wtx (chip); goto recv_begin;
@@ -295,14 +295,14 @@ recv_begin: }if (buf[1 ] ==TPM_CTRL_WTX_ABORT_ACK ) { -dev_info (chip->pdev,"WTX-abort acknowledged\n" ); +dev_info (&chip->dev,"WTX-abort acknowledged\n" );return size; }if (buf[1 ] ==TPM_CTRL_ERROR ) { -dev_err (chip->pdev,"ERROR-package received:\n" ); +dev_err (&chip->dev,"ERROR-package received:\n" );if (buf[4 ] ==TPM_INF_NAK ) -dev_err (chip->pdev, +dev_err (&chip->dev,"-> Negative acknowledgement" " - retransmit command!\n" );return -EIO ;
@@ -321,7 +321,7 @@ static int tpm_inf_send(struct tpm_chip ret =empty_fifo (chip,1 );if (ret) { -dev_err (chip->pdev,"Timeout while clearing FIFO\n" ); +dev_err (&chip->dev,"Timeout while clearing FIFO\n" );return -EIO ; }
drivers/char/tpm/tpm_nsc.c +10 -10
@@ -113,7 +113,7 @@ static int nsc_wait_for_ready(struct tpm }while (time_before (jiffies, stop)); -dev_info (chip->pdev,"wait for ready failed\n" ); +dev_info (&chip->dev,"wait for ready failed\n" );return -EBUSY ; }
@@ -129,12 +129,12 @@ static int tpm_nsc_recv(struct tpm_chipreturn -EIO ;if (wait_for_stat (chip,NSC_STATUS_F0 ,NSC_STATUS_F0 , &data) <0 ) { -dev_err (chip->pdev,"F0 timeout\n" ); +dev_err (&chip->dev,"F0 timeout\n" );return -EIO ; }if ((data =inb (chip->vendor.base +NSC_DATA )) !=NSC_COMMAND_NORMAL ) { -dev_err (chip->pdev,"not in normal mode (0x%x)\n" , +dev_err (&chip->dev,"not in normal mode (0x%x)\n" , data);return -EIO ; }
@@ -143,7 +143,7 @@ static int tpm_nsc_recv(struct tpm_chipfor (p = buffer; p < &buffer[count]; p++) {if (wait_for_stat (chip,NSC_STATUS_OBF ,NSC_STATUS_OBF , &data) <0 ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"OBF timeout (while reading data)\n" );return -EIO ; }
@@ -154,11 +154,11 @@ static int tpm_nsc_recv(struct tpm_chipif ((data &NSC_STATUS_F0 ) ==0 && (wait_for_stat (chip,NSC_STATUS_F0 ,NSC_STATUS_F0 , &data) <0 )) { -dev_err (chip->pdev,"F0 not set\n" ); +dev_err (&chip->dev,"F0 not set\n" );return -EIO ; }if ((data =inb (chip->vendor.base +NSC_DATA )) !=NSC_COMMAND_EOC ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"expected end of command(0x%x)\n" , data);return -EIO ; }
@@ -189,19 +189,19 @@ static int tpm_nsc_send(struct tpm_chipreturn -EIO ;if (wait_for_stat (chip,NSC_STATUS_IBF ,0 , &data) <0 ) { -dev_err (chip->pdev,"IBF timeout\n" ); +dev_err (&chip->dev,"IBF timeout\n" );return -EIO ; }outb (NSC_COMMAND_NORMAL , chip->vendor.base +NSC_COMMAND );if (wait_for_stat (chip,NSC_STATUS_IBR ,NSC_STATUS_IBR , &data) <0 ) { -dev_err (chip->pdev,"IBR timeout\n" ); +dev_err (&chip->dev,"IBR timeout\n" );return -EIO ; }for (i =0 ; i < count; i++) {if (wait_for_stat (chip,NSC_STATUS_IBF ,0 , &data) <0 ) { -dev_err (chip->pdev, +dev_err (&chip->dev,"IBF timeout (while writing data)\n" );return -EIO ; }
@@ -209,7 +209,7 @@ static int tpm_nsc_send(struct tpm_chip }if (wait_for_stat (chip,NSC_STATUS_IBF ,0 , &data) <0 ) { -dev_err (chip->pdev,"IBF timeout\n" ); +dev_err (&chip->dev,"IBF timeout\n" );return -EIO ; }outb (NSC_COMMAND_EOC , chip->vendor.base +NSC_COMMAND );
drivers/char/tpm/tpm_tis.c +8 -8
@@ -293,7 +293,7 @@ static int tpm_tis_recv(struct tpm_chip/* read first 10 bytes, including tag, paramsize, and result */ if ((size =recv_data (chip, buf,TPM_HEADER_SIZE )) <TPM_HEADER_SIZE ) { -dev_err (chip->pdev,"Unable to read header\n" ); +dev_err (&chip->dev,"Unable to read header\n" ); goto out; }
@@ -306,7 +306,7 @@ static int tpm_tis_recv(struct tpm_chipif ((size +=recv_data (chip, &buf[TPM_HEADER_SIZE ], expected -TPM_HEADER_SIZE )) < expected) { -dev_err (chip->pdev,"Unable to read remainder of result\n" ); +dev_err (&chip->dev,"Unable to read remainder of result\n" ); size = -ETIME ; goto out; }
@@ -315,7 +315,7 @@ static int tpm_tis_recv(struct tpm_chip &chip->vendor.int_queue, false); status =tpm_tis_status (chip);if (status &TPM_STS_DATA_AVAIL ) {/* retry? */ -dev_err (chip->pdev,"Error left over data\n" ); +dev_err (&chip->dev,"Error left over data\n" ); size = -EIO ; goto out; }
@@ -401,7 +401,7 @@ static void disable_interrupts(struct tpiowrite32 (intmask, chip->vendor.iobase +TPM_INT_ENABLE (chip->vendor.locality)); -devm_free_irq (chip->pdev, chip->vendor.irq, chip); +devm_free_irq (&chip->dev, chip->vendor.irq, chip); chip->vendor.irq =0 ; }
@@ -463,7 +463,7 @@ static int tpm_tis_send(struct tpm_chipmsleep (1 );if (!priv->irq_tested) {disable_interrupts (chip); -dev_err (chip->pdev, +dev_err (&chip->dev,FW_BUG "TPM interrupt not working, polling instead\n" ); } priv->irq_tested = true;
@@ -533,7 +533,7 @@ static int probe_itpm(struct tpm_chip *c rc =tpm_tis_send_data (chip, cmd_getticks, len);if (rc ==0 ) { -dev_info (chip->pdev,"Detected an iTPM.\n" ); +dev_info (&chip->dev,"Detected an iTPM.\n" ); rc =1 ; }else rc = -EFAULT ;
@@ -766,7 +766,7 @@ static int tpm_tis_init(struct device *dif (devm_request_irq (dev, i, tis_int_probe,IRQF_SHARED , chip->devname, chip) !=0 ) { -dev_info (chip->pdev, +dev_info (&chip->dev,"Unable to request irq: %d for probe\n" , i);continue ;
@@ -818,7 +818,7 @@ static int tpm_tis_init(struct device *dif (devm_request_irq (dev, chip->vendor.irq, tis_int_handler,IRQF_SHARED , chip->devname, chip) !=0 ) { -dev_info (chip->pdev, +dev_info (&chip->dev,"Unable to request irq: %d for use\n" , chip->vendor.irq); chip->vendor.irq =0 ;
Greg Kroah-Hartman
maintainerPATCH 40/57 tpm: Provide strong locking for device removal
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <[email protected]>
commit 4e26195f240d73150e8308ae42874702e3df8d2c upstream.
Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
Previously the tpm core expected module locking to be enough to ensure that tpm_unregister could not be called during certain times, however that hasn't been sufficient for a long time.
Introduce a read/write semaphore around 'ops' so the core can set it to null when unregistering. This provides a strong fence around the driver callbacks, guaranteeing to the driver that no callbacks are running or will run again.
For now the ops_lock is placed very high in the call stack, it could be pushed down and made more granular in future if necessary.
--- drivers/char/tpm/tpm-chip.c | 72 +++++++++++++++++++++++++++++++++++---- drivers/char/tpm/tpm-dev.c | 11 +++++ drivers/char/tpm/tpm-interface.c | 19 +++++----- drivers/char/tpm/tpm-sysfs.c | 5 ++ drivers/char/tpm/tpm.h | 14 ++++--- 5 files changed, 100 insertions(+), 21 deletions(-)
drivers/char/tpm/tpm-chip.c +66 -6
@@ -36,10 +36,60 @@ static DEFINE_SPINLOCK(driver_lock);struct class *tpm_class;dev_t tpm_devt; -/* -* tpm_chip_find_get - return tpm_chip for a given chip number -* @chip_num the device number for the chip +/** +* tpm_try_get_ops() - Get a ref to the tpm_chip +* @chip: Chip to ref +* +* The caller must already have some kind of locking to ensure that chip is +* valid. This function will lock the chip so that the ops member can be +* accessed safely. The locking prevents tpm_chip_unregister from +* completing, so it should not be held for long periods. +* +* Returns -ERRNO if the chip could not be got. */ +int tpm_try_get_ops (struct tpm_chip *chip) +{ +int rc = -EIO ; + +get_device (&chip->dev); + +down_read (&chip->ops_sem); +if (!chip->ops) + goto out_lock; + +if (!try_module_get (chip->dev.parent->driver->owner)) + goto out_lock; + +return 0 ; +out_lock: +up_read (&chip->ops_sem); +put_device (&chip->dev); +return rc; +} +EXPORT_SYMBOL_GPL (tpm_try_get_ops); + +/** +* tpm_put_ops() - Release a ref to the tpm_chip +* @chip: Chip to put +* +* This is the opposite pair to tpm_try_get_ops(). After this returns chip may +* be kfree'd. +*/ +void tpm_put_ops (struct tpm_chip *chip) +{ +module_put (chip->dev.parent->driver->owner); +up_read (&chip->ops_sem); +put_device (&chip->dev); +} +EXPORT_SYMBOL_GPL (tpm_put_ops); + +/** +* tpm_chip_find_get() - return tpm_chip for a given chip number +* @chip_num: id to find +* +* The return'd chip has been tpm_try_get_ops'd and must be released via +* tpm_put_ops +*/ struct tpm_chip *tpm_chip_find_get (int chip_num) {struct tpm_chip *pos, *chip =NULL ;
@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos)) chip = pos; -break ; - } +break ; }rcu_read_unlock ();return chip;
@@ -94,6 +144,7 @@ struct tpm_chip *tpmm_chip_alloc(structreturn ERR_PTR (-ENOMEM );mutex_init (&chip->tpm_mutex); +init_rwsem (&chip->ops_sem);INIT_LIST_HEAD (&chip->list); chip->ops = ops;
@@ -171,6 +222,12 @@ static int tpm_add_char_device(struct tpstatic void tpm_del_char_device (struct tpm_chip *chip) {cdev_del (&chip->cdev); + +/* Make the driver uncallable. */ +down_write (&chip->ops_sem); + chip->ops =NULL ; +up_write (&chip->ops_sem); +device_del (&chip->dev); }
@@ -256,6 +313,9 @@ EXPORT_SYMBOL_GPL(tpm_chip_register);* Takes the chip first away from the list of available TPM chips and then * cleans up all the resources reserved by tpm_chip_register(). * +* Once this function returns the driver call backs in 'op's will not be +* running and will no longer start. +* * NOTE: This function should be only called before deinitializing chip * resources. */
drivers/char/tpm/tpm-dev.c +10 -1
@@ -136,9 +136,18 @@ static ssize_t tpm_write(struct file *fireturn -EFAULT ; } -/* atomic tpm command send and result receive */ +/* atomic tpm command send and result receive. We only hold the ops +* lock during this period so that the tpm can be unregistered even if +* the char dev is held open. +*/ +if (tpm_try_get_ops (priv->chip)) { +mutex_unlock (&priv->buffer_mutex); +return -EPIPE ; + } out_size =tpm_transmit (priv->chip, priv->data_buffer,sizeof (priv->data_buffer),0 ); + +tpm_put_ops (priv->chip);if (out_size <0 ) {mutex_unlock (&priv->buffer_mutex);return out_size;
drivers/char/tpm/tpm-interface.c +10 -9
@@ -687,7 +687,7 @@ int tpm_is_tpm2(u32 chip_num) rc = (chip->flags &TPM_CHIP_FLAG_TPM2 ) !=0 ; -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }
@@ -716,7 +716,7 @@ int tpm_pcr_read(u32 chip_num, int pcr_i rc =tpm2_pcr_read (chip, pcr_idx, res_buf); else rc =tpm_pcr_read_dev (chip, pcr_idx, res_buf); -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }EXPORT_SYMBOL_GPL (tpm_pcr_read);
@@ -751,7 +751,7 @@ int tpm_pcr_extend(u32 chip_num, int pcrif (chip->flags &TPM_CHIP_FLAG_TPM2 ) { rc =tpm2_pcr_extend (chip, pcr_idx, hash); -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }
@@ -761,7 +761,7 @@ int tpm_pcr_extend(u32 chip_num, int pcr rc =tpm_transmit_cmd (chip, &cmd,EXTEND_PCR_RESULT_SIZE ,0 ,"attempting extend a PCR value" ); -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }EXPORT_SYMBOL_GPL (tpm_pcr_extend);
@@ -842,7 +842,7 @@ int tpm_send(u32 chip_num, void *cmd, si rc =tpm_transmit_cmd (chip, cmd, buflen,0 ,"attempting tpm_cmd" ); -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }EXPORT_SYMBOL_GPL (tpm_send);
@@ -1025,7 +1025,7 @@ int tpm_get_random(u32 chip_num, u8 *outif (chip->flags &TPM_CHIP_FLAG_TPM2 ) { err =tpm2_get_random (chip, out, max); -tpm_chip_put (chip); +tpm_put_ops (chip);return err; }
@@ -1047,7 +1047,7 @@ int tpm_get_random(u32 chip_num, u8 *out num_bytes -= recd; }while (retries-- && total < max); -tpm_chip_put (chip); +tpm_put_ops (chip);return total ? total : -EIO ; }EXPORT_SYMBOL_GPL (tpm_get_random);
@@ -1073,7 +1073,7 @@ int tpm_seal_trusted(u32 chip_num, struc rc =tpm2_seal_trusted (chip, payload, options); -tpm_chip_put (chip); +tpm_put_ops (chip);return rc; }EXPORT_SYMBOL_GPL (tpm_seal_trusted);
@@ -1099,7 +1099,8 @@ int tpm_unseal_trusted(u32 chip_num, str rc =tpm2_unseal_trusted (chip, payload, options); -tpm_chip_put (chip); +tpm_put_ops (chip); +return rc; }EXPORT_SYMBOL_GPL (tpm_unseal_trusted);
drivers/char/tpm/tpm-sysfs.c +5 -0
@@ -295,5 +295,10 @@ int tpm_sysfs_add_device(struct tpm_chipvoid tpm_sysfs_del_device (struct tpm_chip *chip) { +/* The sysfs routines rely on an implicit tpm_try_get_ops, this +* function is called before ops is null'd and the sysfs core +* synchronizes this removal so that no callbacks are running or can +* run again +*/ sysfs_remove_group (&chip->dev.parent->kobj, &tpm_dev_group); }
drivers/char/tpm/tpm.h +9 -5
@@ -174,7 +174,13 @@ struct tpm_chip {struct device dev;struct cdev cdev; +/* A driver callback under ops cannot be run unless ops_sem is held +* (sometimes implicitly, eg for the sysfs code). ops becomes null +* when the driver is unregistered, see tpm_try_get_ops. +*/ +struct rw_semaphore ops_sem;const struct tpm_class_ops *ops; +unsigned int flags;int dev_num;/* /dev/tpm# */
@@ -200,11 +206,6 @@ struct tpm_chip {#define to_tpm_chip (d) container_of(d, struct tpm_chip, dev) -static inline void tpm_chip_put (struct tpm_chip *chip) -{ -module_put (chip->dev.parent->driver->owner); -} -static inline int tpm_read_index (int base,int index) {outb (index, base);
@@ -516,6 +517,9 @@ extern int wait_for_tpm_stat(struct tpm_ wait_queue_head_t *, bool);struct tpm_chip *tpm_chip_find_get (int chip_num); +__must_check int tpm_try_get_ops (struct tpm_chip *chip); +void tpm_put_ops (struct tpm_chip *chip); +extern struct tpm_chip *tpmm_chip_alloc (struct device *dev,const struct tpm_class_ops *ops);extern int tpm_chip_register (struct tpm_chip *chip);
Re: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 10 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
drivers/char/tpm/tpm-chip.c struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))
[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit 15516788e581eb32ec1c50e5f00aba3faf95d817
Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500
tpm: Replace device number bitmap with IDR
Ben.
Signature · 2 lines
Ben Hutchings Software Developer, Codethink Ltd.
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 21 lines · Ben Hutchings
Quoted 10 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))[...]
Quoted 8 lines
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
thanks,
greg k-h
Re: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
drivers/char/tpm/tpm-chip.c struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500
Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Jason
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
drivers/char/tpm/tpm-chip.c struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
greg k-h
Re: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 46 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
drivers/char/tpm/tpm-chip.c struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Quoted 5 lines
Ok, so what do you want me to do here?
thanks,
greg k-h
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
/Jarkko
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 51 lines · Jarkko Sakkinen
Quoted 50 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
drivers/char/tpm/tpm-chip.c struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
drivers/char/tpm/tpm-chip.c +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int cif (chip_num !=TPM_ANY_NUM && chip_num != pos->dev_num)continue ; -if (try_module_get (pos->dev.parent->driver->owner)) { +/* rcu prevents chip from being free'd */ +if (!tpm_try_get_ops (pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
Quoted 8 lines
Quoted 1 line
greg k-h
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
Ok, now queued up, thanks.
greg k-h
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 54 lines · Greg Kroah-Hartman
Quoted 53 lines · Jarkko Sakkinen
Quoted 51 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
Review struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
(quoted diff) +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int c if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) continue; - if (try_module_get(pos->dev.parent->driver->owner)) { + /* rcu prevents chip from being free'd */ + if (!tpm_try_get_ops(pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
greg k-h
Quoted 8 lines
Quoted 6 lines
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
Ok, now queued up, thanks.
But it's messy, if someone could verify that this is all working properly on the 4.4-stable kernel with the next -rc release, I would really appreciate it.
thanks,
greg k-h
Re: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 64 lines · Greg Kroah-Hartman
Quoted 54 lines · Greg Kroah-Hartman
Quoted 53 lines · Jarkko Sakkinen
Quoted 51 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
Review struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
(quoted diff) +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int c if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) continue; - if (try_module_get(pos->dev.parent->driver->owner)) { + /* rcu prevents chip from being free'd */ + if (!tpm_try_get_ops(pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
greg k-h
Quoted 8 lines
Quoted 6 lines
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
Ok, now queued up, thanks.
Quoted 7 lines
But it's messy, if someone could verify that this is all working properly on the 4.4-stable kernel with the next -rc release, I would really appreciate it.
thanks,
greg k-h
I will take care of that. Thank you.
/Jarkko
Re: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 69 lines · Jarkko Sakkinen
Quoted 68 lines · Greg Kroah-Hartman
Quoted 54 lines · Greg Kroah-Hartman
Quoted 53 lines · Jarkko Sakkinen
Quoted 51 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
Review struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
(quoted diff) +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int c if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) continue; - if (try_module_get(pos->dev.parent->driver->owner)) { + /* rcu prevents chip from being free'd */ + if (!tpm_try_get_ops(pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
greg k-h
Quoted 8 lines
Quoted 6 lines
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
Ok, now queued up, thanks.
But it's messy, if someone could verify that this is all working properly on the 4.4-stable kernel with the next -rc release, I would really appreciate it.
Quoted 7 lines
Quoted 3 lines
thanks,
greg k-h
I will take care of that. Thank you.
/Jarkko
I tried 4.4.80 kernel (which has the IDR patc) and everything seems to work just fine.
/Jarkko
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 40/57] tpm: Provide strong locking for device removal
Quoted 72 lines · Jarkko Sakkinen
Quoted 71 lines · Jarkko Sakkinen
Quoted 70 lines · Greg Kroah-Hartman
Quoted 54 lines · Greg Kroah-Hartman
Quoted 53 lines · Jarkko Sakkinen
Quoted 51 lines · Greg Kroah-Hartman
Quoted 36 lines · Jason Gunthorpe
Quoted 28 lines · Greg Kroah-Hartman
Quoted 27 lines · Ben Hutchings
Quoted 9 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
From: Jason Gunthorpe <[email protected]>
commit
4e26195f240d73150e8308ae42874702e3df8d2cupstream.Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers.
[...]
Review struct tpm_chip *tpm_chip_find_get(int c · line 103
Quoted 7 lines
(quoted diff) +2
-1@@ -49,10 +99,10 @@ struct tpm_chip *tpm_chip_find_get(int c if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) continue; - if (try_module_get(pos->dev.parent->driver->owner)) { + /* rcu prevents chip from being free'd */ + if (!tpm_try_get_ops(pos))[...]
But an RCU read-side critical section is an atomic context, and semaphore operations can block! Fixed upstream by:
commit
15516788e581eb32ec1c50e5f00aba3faf95d817Author: Stefan Berger <[email protected]> Date: Mon Feb 29 08:53:02 2016 -0500Quoted 6 lines
Quoted 1 line
tpm: Replace device number bitmap with IDR
Ugh, that's a big patch.
Jason, Stefan, and Jarkko, what do you think? Should I also take this for 4.4-stable?
Quoted 8 lines
15516 is part of the series that included 4e26, I wouldn't take that series piecemeal, as Ben observes..
I think it would be safer to avoid all these backport patches and instead restructure the important TPM shutdown patch so that it is 'less safe'. This would mean there is a chance that the another TPM user could send a command after shutdown, but realistically that is not likely to happen.
Ok, so what do you want me to do here?
thanks,
greg k-h
Quoted 8 lines
Quoted 6 lines
Sorry for late response. I just came from four week leave (have been watching kernel mails only 1-2 times a week and missed this thread).
I would actually think that taking this patch would make sense as the changes are trivial and also because this code has reminded almost unchanged after it was added.
Ok, now queued up, thanks.
But it's messy, if someone could verify that this is all working properly on the 4.4-stable kernel with the next -rc release, I would really appreciate it.
thanks,
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
greg k-h
I will take care of that. Thank you.
/Jarkko
I tried 4.4.80 kernel (which has the IDR patc) and everything seems to work just fine.
Great, thanks for testing and letting me know.
greg k-h
Greg Kroah-Hartman
maintainerPATCH 41/57 Add "shutdown" to "struct class".
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Zimmerman <[email protected]>
commit f77af15165847406b15d8f70c382c4cb15846b2a upstream.
The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that.
--- drivers/base/core.c | 6 +++++- include/linux/device.h | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/base/core.c +5 -1
@@ -2094,7 +2094,11 @@ void device_shutdown(void)pm_runtime_get_noresume (dev);pm_runtime_barrier (dev); -if (dev->bus && dev->bus->shutdown) { +if (dev->class && dev->class->shutdown) { +if (initcall_debug) +dev_info (dev,"shutdown\n" ); + dev->class->shutdown (dev); + }else if (dev->bus && dev->bus->shutdown) {if (initcall_debug)dev_info (dev,"shutdown\n" ); dev->bus->shutdown (dev);
include/linux/device.h +2 -0
@@ -368,6 +368,7 @@ int subsys_virtual_register(struct bus_t* @suspend: Used to put the device to sleep mode, usually to a low power * state. * @resume: Used to bring the device from the sleep mode. +* @shutdown: Called at shut-down time to quiesce the device. * @ns_type: Callbacks so sysfs can detemine namespaces. * @namespace: Namespace of the device belongs to this class. * @pm: The default device power management operations of this class.
@@ -396,6 +397,7 @@ struct class {int (*suspend)(struct device *dev,pm_message_t state);int (*resume)(struct device *dev); +int (*shutdown)(struct device *dev);const struct kobj_ns_type_operations *ns_type;const void *(*namespace)(struct device *dev);
Greg Kroah-Hartman
maintainerPATCH 42/57 tpm: Issue a TPM2_Shutdown for TPM2 devices.
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Zimmerman <[email protected]>
commit d1bd4a792d3961a04e6154118816b00167aad91a upstream.
If a TPM2 loses power without a TPM2_Shutdown command being issued (a "disorderly reboot"), it may lose some state that has yet to be persisted to NVRam, and will increment the DA counter. After the DA counter gets sufficiently large, the TPM will lock the user out.
NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs, and sysfs relies on implicit locking on chip->ops, it is not safe to allow this code to run in TPM1, or to add sysfs support to TPM2, until that locking is made explicit.
--- drivers/char/tpm/tpm-chip.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/char/tpm/tpm-sysfs.c | 7 +++++++ 2 files changed, 43 insertions(+)
drivers/char/tpm/tpm-chip.c +36 -0
@@ -124,6 +124,41 @@ static void tpm_dev_release(struct devickfree (chip); } + +/** +* tpm_class_shutdown() - prepare the TPM device for loss of power. +* @dev: device to which the chip is associated. +* +* Issues a TPM2_Shutdown command prior to loss of power, as required by the +* TPM 2.0 spec. +* Then, calls bus- and device- specific shutdown code. +* +* XXX: This codepath relies on the fact that sysfs is not enabled for +* TPM2: sysfs uses an implicit lock on chip->ops, so this could race if TPM2 +* has sysfs support enabled before TPM sysfs's implicit locking is fixed. +*/ +static int tpm_class_shutdown (struct device *dev) +{ + struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev); + +if (chip->flags &TPM_CHIP_FLAG_TPM2 ) { +down_write (&chip->ops_sem); +tpm2_shutdown (chip,TPM2_SU_CLEAR ); + chip->ops =NULL ; +up_write (&chip->ops_sem); + } +/* Allow bus- and device-specific code to run. Note: since chip->ops +* is NULL, more-specific shutdown code will not be able to issue TPM +* commands. +*/ +if (dev->bus && dev->bus->shutdown) + dev->bus->shutdown (dev); +else if (dev->driver && dev->driver->shutdown) + dev->driver->shutdown (dev); +return 0 ; +} + +/** * tpmm_chip_alloc() - allocate a new struct tpm_chip instance * @dev: device to which the chip is associated
@@ -166,6 +201,7 @@ struct tpm_chip *tpmm_chip_alloc(structdev_set_drvdata (dev, chip); chip->dev.class = tpm_class; + chip->dev.class->shutdown = tpm_class_shutdown; chip->dev.release = tpm_dev_release; chip->dev.parent = dev;#ifdef CONFIG_ACPI
drivers/char/tpm/tpm-sysfs.c +7 -0
@@ -284,6 +284,13 @@ static const struct attribute_group tpm_int tpm_sysfs_add_device (struct tpm_chip *chip) {int err; + +/* XXX: If you wish to remove this restriction, you must first update +* tpm_sysfs to explicitly lock chip->ops. +*/ +if (chip->flags &TPM_CHIP_FLAG_TPM2 ) +return 0 ; + err =sysfs_create_group (&chip->dev.parent->kobj, &tpm_dev_group);
Greg Kroah-Hartman
maintainerPATCH 45/57 crypto: atmel - only treat EBUSY as transient if backlog
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gilad Ben-Yossef <[email protected]>
commit 1606043f214f912a52195293614935811a6e3e53 upstream.
The Atmel SHA driver was treating -EBUSY as indication of queueing to backlog without checking that backlog is enabled for the request.
Fix it by checking request flags.
--- drivers/crypto/atmel-sha.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/crypto/atmel-sha.c +3 -1
@@ -963,7 +963,9 @@ static int atmel_sha_finup(struct ahash_ ctx->flags |=SHA_FLAGS_FINUP ; err1 =atmel_sha_update (req); -if (err1 == -EINPROGRESS || err1 == -EBUSY ) +if (err1 == -EINPROGRESS || + (err1 == -EBUSY && (ahash_request_flags (req) & +CRYPTO_TFM_REQ_MAY_BACKLOG )))return err1;/*
Greg Kroah-Hartman
maintainerPATCH 46/57 crypto: sha1-ssse3 - Disable avx2
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit b82ce24426a4071da9529d726057e4e642948667 upstream.
It has been reported that sha1-avx2 can cause page faults by reading beyond the end of the input. This patch disables it until it can be fixed.
--- arch/x86/crypto/sha1_ssse3_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/crypto/sha1_ssse3_glue.c +1 -1
@@ -201,7 +201,7 @@ asmlinkage void sha1_transform_avx2(u32static bool avx2_usable (void ) { -if (avx_usable () &&boot_cpu_has (X86_FEATURE_AVX2 ) +if (false &&avx_usable () &&boot_cpu_has (X86_FEATURE_AVX2 ) &&boot_cpu_has (X86_FEATURE_BMI1 ) &&boot_cpu_has (X86_FEATURE_BMI2 ))return true;
Greg Kroah-Hartman
maintainerPATCH 48/57 sched/topology: Fix overlapping sched_group_mask
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit 73bb059f9b8a00c5e1bf2f7ca83138c05d05e600 upstream.
The point of sched_group_mask is to select those CPUs from sched_group_cpus that can actually arrive at this balance domain.
The current code gets it wrong, as can be readily demonstrated with a topology like:
node 0 1 2 3
0: 10 20 30 20
1: 20 10 20 30
2: 30 20 10 20
3: 20 30 20 10Where (for example) domain 1 on CPU1 ends up with a mask that includes CPU0:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
This causes sched_balance_cpu() to compute the wrong CPU and consequently should_we_balance() will terminate early resulting in missed load-balance opportunities.
The fixed topology looks like:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
(note: this relies on OVERLAP domains to always have children, this is
true because the regular topology domains are still here -- this is before degenerate trimming)
--- kernel/sched/core.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
kernel/sched/core.c +17 -1
@@ -6123,6 +6123,9 @@ enum s_alloc {* Build an iteration mask that can exclude certain CPUs from the upwards * domain traversal. * +* Only CPUs that can arrive at this group should be considered to continue +* balancing. +* * Asymmetric node setups can result in situations where the domain tree is of * unequal depth, make sure to skip domains that already cover the entire * range.
@@ -6141,11 +6144,24 @@ static void build_group_mask(struct schefor_each_cpu (i, span) { sibling = *per_cpu_ptr (sdd->sd, i); -if (!cpumask_test_cpu (i,sched_domain_span (sibling))) + +/* +* Can happen in the asymmetric case, where these siblings are +* unused. The mask will not be empty because those CPUs that +* do have the top domain _should_ span the domain. +*/ +if (!sibling->child) +continue ; + +/* If we would not end up here, we can't continue from here */ +if (!cpumask_equal (sg_span,sched_domain_span (sibling->child)))continue ;cpumask_set_cpu (i,sched_group_mask (sg)); } + +/* We must not have empty masks here */ +WARN_ON_ONCE (cpumask_empty (sched_group_mask (sg))); }/*
Greg Kroah-Hartman
maintainerPATCH 49/57 sched/topology: Optimize build_group_mask()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lauro Ramos Venancio <[email protected]>
commit f32d782e31bf079f600dcec126ed117b0577e85c upstream.
The group mask is always used in intersection with the group CPUs. So, when building the group mask, we don't have to care about CPUs that are not part of the group.
--- kernel/sched/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/sched/core.c +2 -2
@@ -6137,12 +6137,12 @@ enum s_alloc {*/ static void build_group_mask (struct sched_domain *sd,struct sched_group *sg) { -const struct cpumask *span =sched_domain_span (sd); +const struct cpumask *sg_span =sched_group_cpus (sg);struct sd_data *sdd = sd->private;struct sched_domain *sibling;int i; -for_each_cpu (i, span) { +for_each_cpu (i, sg_span) { sibling = *per_cpu_ptr (sdd->sd, i);/*
Greg Kroah-Hartman
maintainerPATCH 50/57 PM / wakeirq: Convert to SRCU
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit ea0212f40c6bc0594c8eff79266759e3ecd4bacc upstream.
The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That breaks the irq bus locking infrastructure, which is allows sleeping functions to be called so interrupt controllers behind slow busses, e.g. i2c, can be handled.
The wakeirq functions hold rcu_read_lock and call into irq functions, which in case of interrupts using the irq bus locking will trigger a might_sleep() splat.
Convert the wakeirq infrastructure to Sleepable RCU and unbreak it.
--- drivers/base/power/wakeup.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/base/power/wakeup.c +18 -12
@@ -60,6 +60,8 @@ static LIST_HEAD(wakeup_sources);static DECLARE_WAIT_QUEUE_HEAD (wakeup_count_wait_queue); +DEFINE_STATIC_SRCU (wakeup_srcu); +static struct wakeup_source deleted_ws = { .name ="deleted" , .lock =__SPIN_LOCK_UNLOCKED (deleted_ws.lock),
@@ -198,7 +200,7 @@ void wakeup_source_remove(struct wakeup_spin_lock_irqsave (&events_lock, flags);list_del_rcu (&ws->entry);spin_unlock_irqrestore (&events_lock, flags); -synchronize_rcu (); +synchronize_srcu (&wakeup_srcu); }EXPORT_SYMBOL_GPL (wakeup_source_remove);
@@ -330,13 +332,14 @@ void device_wakeup_detach_irq(struct devvoid device_wakeup_arm_wake_irqs (void ) {struct wakeup_source *ws; +int srcuidx; -rcu_read_lock (); + srcuidx =srcu_read_lock (&wakeup_srcu);list_for_each_entry_rcu (ws, &wakeup_sources, entry) {if (ws->wakeirq)dev_pm_arm_wake_irq (ws->wakeirq); } -rcu_read_unlock (); +srcu_read_unlock (&wakeup_srcu, srcuidx); }/**
@@ -347,13 +350,14 @@ void device_wakeup_arm_wake_irqs(void)void device_wakeup_disarm_wake_irqs (void ) {struct wakeup_source *ws; +int srcuidx; -rcu_read_lock (); + srcuidx =srcu_read_lock (&wakeup_srcu);list_for_each_entry_rcu (ws, &wakeup_sources, entry) {if (ws->wakeirq)dev_pm_disarm_wake_irq (ws->wakeirq); } -rcu_read_unlock (); +srcu_read_unlock (&wakeup_srcu, srcuidx); }/**
@@ -807,10 +811,10 @@ EXPORT_SYMBOL_GPL(pm_wakeup_event);void pm_print_active_wakeup_sources (void ) {struct wakeup_source *ws; -int active =0 ; +int srcuidx, active =0 ;struct wakeup_source *last_activity_ws =NULL ; -rcu_read_lock (); + srcuidx =srcu_read_lock (&wakeup_srcu);list_for_each_entry_rcu (ws, &wakeup_sources, entry) {if (ws->active) {pr_info ("active wakeup source: %s\n" , ws->name);
@@ -826,7 +830,7 @@ void pm_print_active_wakeup_sources(voidif (!active && last_activity_ws)pr_info ("last active wakeup source: %s\n" , last_activity_ws->name); -rcu_read_unlock (); +srcu_read_unlock (&wakeup_srcu, srcuidx); }EXPORT_SYMBOL_GPL (pm_print_active_wakeup_sources);
@@ -953,8 +957,9 @@ void pm_wakep_autosleep_enabled(bool set {struct wakeup_source *ws;ktime_t now =ktime_get (); +int srcuidx; -rcu_read_lock (); + srcuidx =srcu_read_lock (&wakeup_srcu);list_for_each_entry_rcu (ws, &wakeup_sources, entry) {spin_lock_irq (&ws->lock);if (ws->autosleep_enabled != set) {
@@ -968,7 +973,7 @@ void pm_wakep_autosleep_enabled(bool set }spin_unlock_irq (&ws->lock); } -rcu_read_unlock (); +srcu_read_unlock (&wakeup_srcu, srcuidx); }#endif /* CONFIG_PM_AUTOSLEEP */
@@ -1029,15 +1034,16 @@ static int print_wakeup_source_stats(strstatic int wakeup_sources_stats_show (struct seq_file *m,void *unused) {struct wakeup_source *ws; +int srcuidx;seq_puts (m,"name\t\tactive_count\tevent_count\twakeup_count\t" "expire_count\tactive_since\ttotal_time\tmax_time\t" "last_change\tprevent_suspend_time\n" ); -rcu_read_lock (); + srcuidx =srcu_read_lock (&wakeup_srcu);list_for_each_entry_rcu (ws, &wakeup_sources, entry)print_wakeup_source_stats (m, ws); -rcu_read_unlock (); +srcu_read_unlock (&wakeup_srcu, srcuidx);print_wakeup_source_stats (m, &deleted_ws);
Greg Kroah-Hartman
maintainerPATCH 51/57 PM / QoS: return -EINVAL for bogus strings
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 2ca30331c156ca9e97643ad05dd8930b8fe78b01 upstream.
In the current code, if the user accidentally writes a bogus command to this sysfs file, then we set the latency tolerance to an uninitialized variable.
--- drivers/base/power/sysfs.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/base/power/sysfs.c +2 -0
@@ -268,6 +268,8 @@ static ssize_t pm_qos_latency_tolerance_ value =PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT ; else if (!strcmp(buf, "any") || !strcmp(buf, "any\n")) value =PM_QOS_LATENCY_ANY ; + else + return -EINVAL; } ret =dev_pm_qos_update_user_latency_tolerance (dev, value);return ret <0 ? ret : n;
Greg Kroah-Hartman
maintainerPATCH 52/57 tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavankumar Kondeti <[email protected]>
commit c59f29cb144a6a0dfac16ede9dc8eafc02dc56ca upstream.
The 's' flag is supposed to indicate that a softirq is running. This can be detected by testing the preempt_count with SOFTIRQ_OFFSET.
The current code tests the preempt_count with SOFTIRQ_MASK, which would be true even when softirqs are disabled but not serving a softirq.
--- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/trace.c +1 -1
@@ -1660,7 +1660,7 @@ tracing_generic_entry_update(struct tracTRACE_FLAG_IRQS_NOSUPPORT | #endif ((pc &HARDIRQ_MASK ) ?TRACE_FLAG_HARDIRQ :0 ) | - ((pc &SOFTIRQ_MASK ) ?TRACE_FLAG_SOFTIRQ :0 ) | + ((pc &SOFTIRQ_OFFSET ) ?TRACE_FLAG_SOFTIRQ :0 ) | (tif_need_resched () ?TRACE_FLAG_NEED_RESCHED :0 ) | (test_preempt_need_resched() ? TRACE_FLAG_PREEMPT_RESCHED : 0); }
Greg Kroah-Hartman
maintainerPATCH 53/57 KVM: x86: disable MPX if host did not enable MPX XSAVE features
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <[email protected]>
commit a87036add09283e6c4f4103a15c596c67b86ab86 upstream.
When eager FPU is disabled, KVM will still see the MPX bit in CPUID and presumably the MPX vmentry and vmexit controls. However, it will not be able to expose the MPX XSAVE features to the guest, because the guest's accessible XSAVE features are always a subset of host_xcr0.
In this case, we should disable the MPX CPUID bit, the BNDCFGS MSR, and the MPX vmentry and vmexit controls for nested virtualization. It is then unnecessary to enable guest eager FPU if the guest has the MPX CPUID bit set.
--- arch/x86/kvm/cpuid.c | 13 ++++++++++--- arch/x86/kvm/cpuid.h | 9 +-------- arch/x86/kvm/vmx.c | 13 ++++++------- 3 files changed, 17 insertions(+), 18 deletions(-)
arch/x86/kvm/cpuid.c +10 -3
@@ -46,11 +46,18 @@ static u32 xstate_required_size(u64 xstareturn ret; } +bool kvm_mpx_supported (void ) +{ +return ((host_xcr0 & (XFEATURE_MASK_BNDREGS |XFEATURE_MASK_BNDCSR )) + && kvm_x86_ops->mpx_supported ()); +} +EXPORT_SYMBOL_GPL (kvm_mpx_supported); +u64 kvm_supported_xcr0 (void ) {u64 xcr0 =KVM_SUPPORTED_XCR0 & host_xcr0; -if (!kvm_x86_ops->mpx_supported ()) +if (!kvm_mpx_supported ()) xcr0 &= ~(XFEATURE_MASK_BNDREGS |XFEATURE_MASK_BNDCSR );return xcr0;
@@ -97,7 +104,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcif (best && (best->eax & (F (XSAVES ) |F (XSAVEC )))) best->ebx =xstate_required_size (vcpu->arch.xcr0, true); - vcpu->arch.eager_fpu =use_eager_fpu () ||guest_cpuid_has_mpx (vcpu); + vcpu->arch.eager_fpu =use_eager_fpu ();if (vcpu->arch.eager_fpu) kvm_x86_ops->fpu_activate (vcpu);
@@ -295,7 +302,7 @@ static inline int __do_cpuid_ent(struct#endif unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported () ?F (RDTSCP ) :0 ;unsigned f_invpcid = kvm_x86_ops->invpcid_supported () ?F (INVPCID ) :0 ; -unsigned f_mpx = kvm_x86_ops->mpx_supported () ?F (MPX ) :0 ; +unsigned f_mpx =kvm_mpx_supported () ?F (MPX ) :0 ;unsigned f_xsaves = kvm_x86_ops->xsaves_supported () ?F (XSAVES ) :0 ;/* cpuid 1.edx */
arch/x86/kvm/cpuid.h +1 -8
@@ -4,6 +4,7 @@#include "x86.h" int kvm_update_cpuid (struct kvm_vcpu *vcpu); +bool kvm_mpx_supported (void );struct kvm_cpuid_entry2 *kvm_find_cpuid_entry (struct kvm_vcpu *vcpu,u32 function,u32 index); int kvm_dev_ioctl_get_cpuid(struct kvm_cpuid2 *cpuid,
@@ -134,14 +135,6 @@ static inline bool guest_cpuid_has_rtm(sreturn best && (best->ebx &bit (X86_FEATURE_RTM )); } -static inline bool guest_cpuid_has_mpx (struct kvm_vcpu *vcpu) -{ -struct kvm_cpuid_entry2 *best; - - best =kvm_find_cpuid_entry (vcpu,7 ,0 ); -return best && (best->ebx &bit (X86_FEATURE_MPX )); -} -static inline bool guest_cpuid_has_pcommit (struct kvm_vcpu *vcpu) {struct kvm_cpuid_entry2 *best;
arch/x86/kvm/vmx.c +6 -7
@@ -863,7 +863,6 @@ static unsigned long nested_ept_get_cr3(static u64 construct_eptp (unsigned long root_hpa);static void kvm_cpu_vmxon (u64 addr);static void kvm_cpu_vmxoff (void ); -static bool vmx_mpx_supported (void );static bool vmx_xsaves_supported (void );static int vmx_cpu_uses_apicv (struct kvm_vcpu *vcpu);static int vmx_set_tss_addr (struct kvm *kvm,unsigned int addr);
@@ -2541,7 +2540,7 @@ static void nested_vmx_setup_ctls_msrs(sVM_EXIT_LOAD_IA32_EFER |VM_EXIT_SAVE_IA32_EFER |VM_EXIT_SAVE_VMX_PREEMPTION_TIMER |VM_EXIT_ACK_INTR_ON_EXIT ; -if (vmx_mpx_supported ()) +if (kvm_mpx_supported ()) vmx->nested.nested_vmx_exit_ctls_high |=VM_EXIT_CLEAR_BNDCFGS ;/* We support free control of debug control saving. */
@@ -2562,7 +2561,7 @@ static void nested_vmx_setup_ctls_msrs(sVM_ENTRY_LOAD_IA32_PAT ; vmx->nested.nested_vmx_entry_ctls_high |= (VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |VM_ENTRY_LOAD_IA32_EFER ); -if (vmx_mpx_supported ()) +if (kvm_mpx_supported ()) vmx->nested.nested_vmx_entry_ctls_high |=VM_ENTRY_LOAD_BNDCFGS ;/* We support free control of debug control loading. */
@@ -2813,7 +2812,7 @@ static int vmx_get_msr(struct kvm_vcpu * msr_info->data =vmcs_readl (GUEST_SYSENTER_ESP );break ;case MSR_IA32_BNDCFGS : -if (!vmx_mpx_supported ()) +if (!kvm_mpx_supported ())return 1 ; msr_info->data =vmcs_read64 (GUEST_BNDCFGS );break ;
@@ -2890,7 +2889,7 @@ static int vmx_set_msr(struct kvm_vcpu *vmcs_writel (GUEST_SYSENTER_ESP , data);break ;case MSR_IA32_BNDCFGS : -if (!vmx_mpx_supported ()) +if (!kvm_mpx_supported ())return 1 ;vmcs_write64 (GUEST_BNDCFGS , data);break ;
@@ -3363,7 +3362,7 @@ static void init_vmcs_shadow_fields(voidfor (i = j =0 ; i < max_shadow_read_write_fields; i++) {switch (shadow_read_write_fields[i]) {case GUEST_BNDCFGS : -if (!vmx_mpx_supported ()) +if (!kvm_mpx_supported ())continue ;break ;default :
@@ -10265,7 +10264,7 @@ static void prepare_vmcs12(struct kvm_vc vmcs12->guest_sysenter_cs =vmcs_read32 (GUEST_SYSENTER_CS ); vmcs12->guest_sysenter_esp =vmcs_readl (GUEST_SYSENTER_ESP ); vmcs12->guest_sysenter_eip =vmcs_readl (GUEST_SYSENTER_EIP ); -if (vmx_mpx_supported ()) +if (kvm_mpx_supported ()) vmcs12->guest_bndcfgs =vmcs_read64 (GUEST_BNDCFGS );if (nested_cpu_has_xsaves (vmcs12)) vmcs12->xss_exit_bitmap =vmcs_read64 (XSS_EXIT_BITMAP );
Greg Kroah-Hartman
maintainerPATCH 57/57 kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haozhong Zhang <[email protected]>
commit 691bd4340bef49cf7e5855d06cf24444b5bf2d85 upstream.
It's easier for host applications, such as QEMU, if they can always access guest MSR_IA32_BNDCFGS in VMCS, even though MPX is disabled in guest cpuid.
--- arch/x86/kvm/vmx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx.c +4 -2
@@ -2812,7 +2812,8 @@ static int vmx_get_msr(struct kvm_vcpu * msr_info->data =vmcs_readl (GUEST_SYSENTER_ESP );break ;case MSR_IA32_BNDCFGS : -if (!kvm_mpx_supported () || !guest_cpuid_has_mpx (vcpu)) +if (!kvm_mpx_supported () || + (!msr_info->host_initiated && !guest_cpuid_has_mpx (vcpu)))return 1 ; msr_info->data =vmcs_read64 (GUEST_BNDCFGS );break ;
@@ -2889,7 +2890,8 @@ static int vmx_set_msr(struct kvm_vcpu *vmcs_writel (GUEST_SYSENTER_ESP , data);break ;case MSR_IA32_BNDCFGS : -if (!kvm_mpx_supported () || !guest_cpuid_has_mpx (vcpu)) +if (!kvm_mpx_supported () || + (!msr_info->host_initiated && !guest_cpuid_has_mpx (vcpu)))return 1 ;if (is_noncanonical_address (data &PAGE_MASK ) || (data &MSR_IA32_BNDCFGS_RSVD ))
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.78 release. There are 57 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri Jul 21 11:12:31 UTC 2017. Anything received after that time might be too late.
Build results:
total: 143 pass: 143 fail: 0
Qemu test results:
total: 115 pass: 115 fail: 0Details are available at http://kerneltests.org/builders.
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.78 release. There are 57 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri Jul 21 11:12:31 UTC 2017. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.78-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah