drm/panel: simple: Fix width and height for Olimex LCD-OLinuXino-4.3TS
Subsystems (3)
PATCH 1/1 drm/panel: simple: Fix width and height for Olimex LCD-OLinuXino-4.3TS
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm.
The width and height should be set to the active display area.
--- drivers/gpu/drm/panel/panel-simple.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/panel/panel-simple.c +2 -2
@@ -1522,8 +1522,8 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = { .modes = &olimex_lcd_olinuxino_43ts_mode, .num_modes = 1, .size = { - .width = 105, - .height = 67, + .width = 95, + .height = 54, }, .bus_format = MEDIA_BUS_FMT_RGB888_1X24, };
Signature · 1 line
2.13.2
Quoted 6 lines · Jonathan Liu
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm.
The width and height should be set to the active display area.
Signed-off-by Jonathan Liu <[email protected]>
You probably want:
LCD-OLinuXino-4.3TS")
Otherwise,
against the panel datasheet linked from Olimex's product page. This should probably go in through drm-misc?
Thierry Reding
AppliedQuoted 9 lines · Jonathan Liu
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm.
The width and height should be set to the active display area.
Signed-off-by Jonathan Liu <[email protected]>--- drivers/gpu/drm/panel/panel-simple.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Applied to drm-misc-next, thanks.
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel