ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
Subsystems (2)
Fabio Estevam
reviewerPATCH v2 1/1 ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
From: Steve Longerbeam <[email protected]>
Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640.
Increase max zoneorder to allow larger video buffer allocations.
---
Changes since v1:
- Rebased against Shawn Guo's for-next tree.
arch/arm/configs/imx_v6_v7_defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm/configs/imx_v6_v7_defconfig +11 -0
@@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_CMA=y +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y
@@ -186,6 +187,7 @@ CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y CONFIG_I2C_MUX_GPIO=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_ALGOPCF=m
@@ -229,14 +231,20 @@ CONFIG_REGULATOR_PFUZE100=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_RC_DEVICES=y CONFIG_IR_GPIO_CIR=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MUX=y CONFIG_SOC_CAMERA=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m +CONFIG_VIDEO_OV5640=m CONFIG_SOC_CAMERA_OV2640=y CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y
@@ -346,6 +354,9 @@ CONFIG_FSL_EDMA=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y CONFIG_STAGING=y +CONFIG_STAGING_MEDIA=y +CONFIG_VIDEO_IMX_MEDIA=y +CONFIG_COMMON_CLK_PWM=y CONFIG_IIO=y CONFIG_IMX7D_ADC=y CONFIG_VF610_ADC=y
Signature · 1 line
2.7.4
Shawn Guo
AppliedPATCH v2 1/1 ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
Quoted 8 lines · Fabio Estevam
From: Steve Longerbeam <[email protected]>
Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640.
Quoted 4 lines
Increase max zoneorder to allow larger video buffer allocations.
Signed-off-by Steve Longerbeam <[email protected]>Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.