board: atmel: Convert to support DM_VIDEO

PATCH New Wenyou Yang 2 participants 9 messages Jul 31, 2017 – Sep 1, 2017

Subsystems (4)

Arm (32-bit) Arm sub-architectures Library code Arm/Microchip (AT91) SoC support

lore

Share & tools

lore

Wenyou Yang

author

2017-07-31 06:02 UTC #0 lore raw

cover board: atmel: Convert to support DM_VIDEO

Add a common code to display the company's logo and board information by using the API from DM_VIDEO under the board/$(VENDOR)/common folder, and the logo files can be used by the API from DM_VIDEO, and then convert the board to enable the driver model support for LCD/video.

It is based on the patch series:

	[PATCH v2 0/3] board: atmel: Set the ethernet mac address from eeprom
	https://lists.denx.de/pipermail/u-boot/2017-July/300527.html

Wenyou Yang (7):
lib: at91: Add logo files used by API from DM_VIDEO
atmel: common: Add function to display via DM_VIDEO's API
board: sama5d2_xplained: Convert to support DM_VIDEO
board: sama5d3xek: Convert to support DM_VIDEO
board: sama5d4ek: Convert to support DM_VIDEO
board: sama5d4_xplained: Convert to support DM_VIDEO
board: at91sam9x5ek: Convert to support DM_VIDEO

 arch/arm/dts/at91-sama5d2_xplained.dts          |   60 ++
 arch/arm/dts/at91-sama5d4_xplained.dts          |   25 +
 arch/arm/dts/at91-sama5d4ek.dts                 |   26 +
 arch/arm/dts/sama5d2.dtsi                       |    7 +
 arch/arm/dts/sama5d36ek_cmp.dts                 |    1 +
 arch/arm/dts/sama5d3_lcd.dtsi                   |   21 +-
 arch/arm/dts/sama5d3xdm.dtsi                    |   26 +
 arch/arm/dts/sama5d4.dtsi                       |   21 +-
 arch/arm/mach-at91/Kconfig                      |    4 +
 arch/arm/mach-at91/include/mach/at91_common.h   |    1 +
 board/atmel/at91sam9x5ek/at91sam9x5ek.c         |  111 +-
 board/atmel/common/Makefile                     |    1 +
 board/atmel/common/video_display.c              |   72 ++
 board/atmel/sama5d2_xplained/sama5d2_xplained.c |   95 +-
 board/atmel/sama5d3xek/sama5d3xek.c             |   93 +-
 board/atmel/sama5d4_xplained/sama5d4_xplained.c |  102 +-
 board/atmel/sama5d4ek/sama5d4ek.c               |   97 +-
 configs/at91sam9x5ek_dataflash_defconfig        |    3 +-
 configs/at91sam9x5ek_mmc_defconfig              |    3 +-
 configs/at91sam9x5ek_nandflash_defconfig        |    3 +-
 configs/at91sam9x5ek_spiflash_defconfig         |    3 +-
 configs/sama5d2_xplained_mmc_defconfig          |    2 +
 configs/sama5d2_xplained_spiflash_defconfig     |    2 +
 configs/sama5d36ek_cmp_mmc_defconfig            |    3 +-
 configs/sama5d36ek_cmp_nandflash_defconfig      |    3 +-
 configs/sama5d36ek_cmp_spiflash_defconfig       |    3 +-
 configs/sama5d3xek_mmc_defconfig                |    3 +-
 configs/sama5d3xek_nandflash_defconfig          |    3 +-
 configs/sama5d3xek_spiflash_defconfig           |    3 +-
 configs/sama5d4_xplained_mmc_defconfig          |    2 +
 configs/sama5d4_xplained_nandflash_defconfig    |    2 +
 configs/sama5d4_xplained_spiflash_defconfig     |    2 +
 configs/sama5d4ek_mmc_defconfig                 |    3 +-
 configs/sama5d4ek_nandflash_defconfig           |    3 +-
 configs/sama5d4ek_spiflash_defconfig            |    3 +-
 include/atmel_lcd.h                             |    9 +
 include/configs/at91sam9x5ek.h                  |   10 -
 include/configs/sama5d2_xplained.h              |   12 -
 include/configs/sama5d3xek.h                    |   12 -
 include/configs/sama5d4_xplained.h              |   11 -
 include/configs/sama5d4ek.h                     |    9 -
 lib/Makefile                                    |    1 +
 lib/at91/Makefile                               |    8 +
 lib/at91/at91.c                                 |   30 +
 lib/at91/atmel_logo_8bpp.h                      | 1310 +++++++++++++++++++++++
 lib/at91/microchip_logo_8bpp.h                  | 1082 +++++++++++++++++++
 tools/logos/microchip.bmp                       |  Bin 0 -> 12726 bytes
 47 files changed, 2729 insertions(+), 577 deletions(-)
 create mode 100644 board/atmel/common/video_display.c
 create mode 100644 lib/at91/Makefile
 create mode 100644 lib/at91/at91.c
 create mode 100644 lib/at91/atmel_logo_8bpp.h
 create mode 100644 lib/at91/microchip_logo_8bpp.h
 create mode 100644 tools/logos/microchip.bmp

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #1 lore raw

PATCH 1/7 lib: at91: Add logo files used by API from DM_VIDEO

From: Wenyou Yang <[email protected]>

In order to display the company's logo by using the API from DM_VIDEO, and add the Atmel and Microchip logo files.

Signed-off-by Wenyou Yang <[email protected]>

---

 include/atmel_lcd.h            |    9 +
 lib/Makefile                   |    1 +
 lib/at91/Makefile              |    8 +
 lib/at91/at91.c                |   30 +
 lib/at91/atmel_logo_8bpp.h     | 1310 ++++++++++++++++++++++++++++++++++++++++
 lib/at91/microchip_logo_8bpp.h | 1082 +++++++++++++++++++++++++++++++++
 tools/logos/microchip.bmp      |  Bin 0 -> 12726 bytes
 7 files changed, 2440 insertions(+)
 create mode 100644 lib/at91/Makefile
 create mode 100644 lib/at91/at91.c
 create mode 100644 lib/at91/atmel_logo_8bpp.h
 create mode 100644 lib/at91/microchip_logo_8bpp.h
 create mode 100644 tools/logos/microchip.bmp

include/atmel_lcd.h +9 -0

index 8a2f46f6c7..ee7ba27798 100644
@@ -43,6 +43,15 @@ typedef struct vidinfo {
 	u_long vl_lower_margin;	/* Time from picture to sync */
 
 	u_long	mmio;		/* Memory mapped registers */
+
+	u_int logo_width;
+	u_int logo_height;
+	int logo_x_offset;
+	int logo_y_offset;
+	u_long logo_addr;
 } vidinfo_t;
 
+void atmel_logo_info(vidinfo_t *info);
+void microchip_logo_info(vidinfo_t *info);
+
 #endif

lib/Makefile +1 -0

index eacc7d6485..55c5dff7b4 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_TIZEN) += tizen/
 obj-$(CONFIG_FIT) += libfdt/
 obj-$(CONFIG_OF_LIVE) += of_live.o
 obj-$(CONFIG_CMD_DHRYSTONE) += dhry/
+obj-$(CONFIG_ARCH_AT91) += at91/
 
 obj-$(CONFIG_AES) += aes.o
 obj-$(CONFIG_USB_TTY) += circbuf.o

lib/at91/Makefile new file +8 -0

new file mode 100644
index 0000000000..5a18875382
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2017 Microchip
+# Wenyou.Yang <[email protected]>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_ARCH_AT91) += at91.o

lib/at91/at91.c new file +30 -0

new file mode 100644
index 0000000000..5dca1507da
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Microchip
+ *		 Wenyou.Yang <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <atmel_lcd.h>
+
+#include "atmel_logo_8bpp.h"
+#include "microchip_logo_8bpp.h"
+
+void atmel_logo_info(vidinfo_t *info)
+{
+	info->logo_width = ATMEL_LOGO_8BPP_WIDTH;
+	info->logo_height = ATMEL_LOGO_8BPP_HEIGHT;
+	info->logo_x_offset = ATMEL_LOGO_8BPP_X_OFFSET;
+	info->logo_y_offset = ATMEL_LOGO_8BPP_X_OFFSET;
+	info->logo_addr = (u_long)atmel_logo_8bpp;
+}
+
+void microchip_logo_info(vidinfo_t *info)
+{
+	info->logo_width = MICROCHIP_LOGO_8BPP_WIDTH;
+	info->logo_height = MICROCHIP_LOGO_8BPP_HEIGHT;
+	info->logo_x_offset = MICROCHIP_LOGO_8BPP_X_OFFSET;
+	info->logo_y_offset = MICROCHIP_LOGO_8BPP_X_OFFSET;
+	info->logo_addr = (u_long)microchip_logo_8bpp;
+}

lib/at91/atmel_logo_8bpp.h new file +1310 -0

1,310 lines not on this page · raw message

lib/at91/microchip_logo_8bpp.h new file +1082 -0

1,082 lines not on this page · raw message

tools/logos/microchip.bmp new file binary +0 -0

new file mode 100644
index 0000000000000000000000000000000000000000..bcecbe972f4e5f088f458df835396fc44293687f
GIT binary patch

zcmeI2v5xyT62=+e0J}4APoVOe6lo4u3fH+f7;xjl#p)sQ0DKP at t3o)J?ozY9Di4rC zZ=h6ikwW>+3 at K6auJPaCa6TjE?qY=NzKRkIHa}v&wu^&gVXf)zc}|du6_pp0N=T_ z*8A_B|+;^tr$PNbNo8*E#s3*7ea91m*9T=&%d23N>BlA6g3E-b*^-v09=$6 at Sp|( zw9Zuy6rcnYDi3N9KpUT1ke8qW9 at HR!);TU+U4Rl)z=IkD&|;(m1t>uUJg7kct#kak zwg4rlfCnQpmn9gOjiK;selJH2%t4;ML}MI3V2Y109vD67UU(UfCnQptUKf3i1+E zz=IkD(AsqQg1iJ3 at Sp|(v^JG>L0*Cicu<1?TASujke8qW9 at HR!R$WlG1$hZ7;6V)n zXq|_@cLfmU6_B4A1kgHPI8cBRRKSB81kjq>%7VNE74V=20kr1Qsvs{x1w5!h0Ij*3 zhj?Ft3V2Y109unmU67Zc0v^;LfYxLZ3i1+Ez=IkD(5i%dTacHa0v^;LfYt^02Uma+ zRKSB8$WLq1Dhl!vRKSB81kjr7%7VNE74V=20kkHsvs{x1w5!h0IkW at 7vv?VfCnQ zpfxGi1$hZ7;6V)nXies!ATL1$JgD8TzYVUToo77f2K{xzAXk7Nsgm+5y=LGw1FsqQ zbIm~Cb?5iPVYfRR-p*au_s>kf at 6T_$Svs7%r)AW4=NXq+czaSt{fBIX)O+YqU%^Q zpQXd)*+kc0?$8kzJsFJt!?JM+B}!!oq%x&8%WcryQ77WSXJ_l(fy$=ovxeQy44 z!*a=MHs>dE4}>zsZ4R<prWz|hS<LQsNno4ZMQ!hPmNpwJKN+F($mcDpE7pkmo-p-q zMrcx(DQ+r%kyM}3r~Pglq?-T640g7JHs|sAoeC~fTYOC49FNCUY?dB<rLGzJ6Q5M| z*W*5=W<5xc#yW84cv{a|Xb)<dsSho*kBu&uC#~SIvHxi0rxzD7f40>S^)^X;(oNz7 zX}#y=ikZig#C+0y8R$8V7J&Jr7<1*o*w&Xn{;L}PUCGZ<es#d(q7A{&z4cG!F6b8 zlqOT3oPW%|;Gnq8F4=OIMXf4c2l3MeDvz10}6wa^4YKTnUihX)sXR#hO1#U-Igmx z6FalCUd+Ka^3m8F8490CZG)_+MLFJ8+hw}1VgTmG*=-V^*;I@9!pEMXu3OFBqYhg1 zD1*#Oi$vD{9to|&Y~Q}Ct5j*M1+0Pd#;we6+A-L223_&9;@Mt7vB}1Yx1~si3CU zEOt2__e+h={L$imR2U>=ny0|c|ZePrZx?4i*lqV(hzA!(IBuv%~=_rekHc$8drkU z#bn01tC?Y~;{c;&v-Jb}8J{!|b2%q;nN|qf&EEDPJ%(MKFYhuMR{^lH at T=%~@xB z;!?H&=X?<8TD+7@5nrujfSW$s=mu$>$AgK_Y}$r_m=-lfxSpx28}FD&9n9m&L6?n0 zF>!+=v?m5SGCud}AJOBOZum&oZMrS;H9o0E at _C<6NVA?_JoffKW*_}rtw5=`9Vk3 zmtwanWS!(D*61}8evi*q6RqL at F&~SR(TIC|wzjv)ShGIjpPe4iWbr3+Wk6BiqP!bp zd0Zb74YrLqrcpk~<qn^{#e<cs1zr8O{y9$bdEY<RwI<Q~tPk-(2pxK+f4<egG7sgQ zsBK(Lx}mB<m}*h~zLzD%(D(R6W5tL$ADNer*AF*RnysH0YeeL68;FA|A3Slp)y&n# z{S*x7sT@|iPhE#w1Dd;J~wMSJ$U5f2#cD=crZo?sg{Rq8x07efv@nvMK|hNs0}_- z>{dQkbIhRPYh+EcG>wl2hh{un^6ike1Zk2TmTdnyaf2G27u$bszT?hX0w>iJ382{ z-um=jXRfxTsApZe at PYVg^p0rO?4|J!nX3!?UNZzX>S#_hGn_gfq at oMr4?~Mo%(F= z?xz+Hv?rp-Q+l(r+-hd!x!UM16QfCltn(|Sk&o^E)HJ;9LOtVMzVxDWff)VE}yL3 zJYHKs*de(0X}^%SBg=B8wv2)X7mW_1jw0xCWvtcpR9FKxm8eC{r;i?+M(pJ^yP zJZ27>1UGIzy47$tNCfqZQARi8gBhggEg3rUNmcgTlg{<RhS9}RFPm>atKqAZt~q_c z&H5R~+L{I0%05QHB at e_mJL7Va(*tQpT+=$WR$Z~-!#otYFF}|&l2VSN_|RtAL91 zHfUn_U5z!T*e5pC?luTJcN&L0-p}ap9tX8aN~fI;wcV6Q=ULatAZgbY!z at DQkNDqS zU(|X&ECiU^l#nWJcF;+dX+UOMjAfI4+F(+n2j%^HB&4rF|&*w1o4WN^OJ&FDT2<9 z8jIqCh@{7ke=6aG)19N*)Iqz8mCvc^n9JJDLW?>mu7a6!!9O5JK0F5w6Su2E{#U^ z&3=5tBURV^J}st)(U=}Q5z5)XOWED1O*^J&9!HtISeZtC(A7w2^38O0tF{MOGv>c zA#`9f|0vLZVe|(y{ru0t-LT at l<^RoM|JJ$byT$(=M8R>;VX^N&*onV&<VUspkdef; z^>H4|9%bN{pUb~gyrtuhxQBmv(J<Dp7t!p?BR{M|-*=a at rVIbR^Dr}B4}Q(SYX)93 I@P}vMcQ9A-m;e9(

literal 0
HcmV?d00001

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #2 lore raw

PATCH 2/7 atmel: common: Add function to display via DM_VIDEO's API

In reply to Wenyou Yang

Add a function to display the company's logo and board information by using the API from DM_VIDEO. This function can be shared by other atmel boards, so locate it in common folder.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/mach-at91/include/mach/at91_common.h |  1 +
 board/atmel/common/Makefile                   |  1 +
 board/atmel/common/video_display.c            | 72 +++++++++++++++++++++++++++
 3 files changed, 74 insertions(+)
 create mode 100644 board/atmel/common/video_display.c

arch/arm/mach-at91/include/mach/at91_common.h +1 -0

index a95fe41610..5416eb455d 100644
@@ -37,5 +37,6 @@ void redirect_int_from_saic_to_aic(void);
 void configure_2nd_sram_as_l2_cache(void);
 
 int at91_set_ethaddr(int offset);
+int at91_video_show_board_info(void);
 
 #endif /* AT91_COMMON_H */

board/atmel/common/Makefile +1 -0

index 6d9c6850b5..8a6850bc19 100644
@@ -8,4 +8,5 @@
 obj-y += board.o
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_I2C_EEPROM) += mac_eeprom.o
+obj-$(CONFIG_DM_VIDEO) += video_display.o
 endif

board/atmel/common/video_display.c new file +72 -0

72 lines not on this page · raw message

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #3 lore raw

PATCH 3/7 board: sama5d2_xplained: Convert to support DM_VIDEO

In reply to Wenyou Yang

Convert the board to enable the driver model support for LCD/video.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/dts/at91-sama5d2_xplained.dts          | 60 ++++++++++++++++
 arch/arm/dts/sama5d2.dtsi                       |  7 ++
 arch/arm/mach-at91/Kconfig                      |  1 +
 board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 ++-----------------------
 configs/sama5d2_xplained_mmc_defconfig          |  2 +
 configs/sama5d2_xplained_spiflash_defconfig     |  2 +
 include/configs/sama5d2_xplained.h              | 12 ----
 7 files changed, 79 insertions(+), 100 deletions(-)

arch/arm/dts/at91-sama5d2_xplained.dts +60 -0

index b00aaa2c79..01326a1ee0 100644
@@ -41,6 +41,31 @@
 		};
 
 		apb {
+			hlcdc: hlcdc at f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
 			qspi0: spi at f0020000 {
 				status = "okay";

@@ -117,6 +142,41 @@
 						bias-disable;
 					};
 
+					pinctrl_lcd_base: pinctrl_lcd_base {
+						pinmux = <PIN_PC30__LCDVSYNC>,
+							<PIN_PC31__LCDHSYNC>,
+							<PIN_PD1__LCDDEN>,
+							<PIN_PD0__LCDPCK>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+						pinmux = <PIN_PC28__LCDPWM>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+						pinmux = <PIN_PC10__LCDDAT2>,
+							<PIN_PC11__LCDDAT3>,
+							<PIN_PC12__LCDDAT4>,
+							<PIN_PC13__LCDDAT5>,
+							<PIN_PC14__LCDDAT6>,
+							<PIN_PC15__LCDDAT7>,
+							<PIN_PC16__LCDDAT10>,
+							<PIN_PC17__LCDDAT11>,
+							<PIN_PC18__LCDDAT12>,
+							<PIN_PC19__LCDDAT13>,
+							<PIN_PC20__LCDDAT14>,
+							<PIN_PC21__LCDDAT15>,
+							<PIN_PC22__LCDDAT18>,
+							<PIN_PC23__LCDDAT19>,
+							<PIN_PC24__LCDDAT20>,
+							<PIN_PC25__LCDDAT21>,
+							<PIN_PC26__LCDDAT22>,
+							<PIN_PC27__LCDDAT23>;
+						bias-disable;
+					};
+
 					pinctrl_macb0_phy_irq: macb0_phy_irq {
 						pinmux = <PIN_PC9__GPIO>;
 						bias-disable;

arch/arm/dts/sama5d2.dtsi +7 -0

index 8d89b83b53..fbaac0834c 100644
@@ -69,6 +69,13 @@
 			#size-cells = <1>;
 			u-boot,dm-pre-reloc;
 
+			hlcdc: hlcdc at f0000000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				clocks = <&lcdc_clk>;
+				status = "disabled";
+			};
+
 			pmc: pmc at f0014000 {
 				compatible = "atmel,sama5d2-pmc", "syscon";
 				reg = <0xf0014000 0x160>;

arch/arm/mach-at91/Kconfig +1 -0

index 033c1efd2b..a52599ab5b 100644
@@ -97,6 +97,7 @@ config TARGET_SAMA5D2_XPLAINED
 	select CPU_V7
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 
 config TARGET_SAMA5D3_XPLAINED
 	bool "SAMA5D3 Xplained board"

board/atmel/sama5d2_xplained/sama5d2_xplained.c +7 ~~-88~~

116 lines not on this page · raw message

configs/sama5d2_xplained_mmc_defconfig +2 -0

index f1b1d0a93b..4333ea6f93 100644
@@ -78,3 +78,5 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d2_xplained_spiflash_defconfig +2 -0

index 896e333e49..1176ef1267 100644
@@ -75,3 +75,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

include/configs/sama5d2_xplained.h +0 ~~-12~~

index bcddd5b0fe..fdfc1d1bc0 100644
@@ -38,18 +38,6 @@
 /* NAND flash */
 #undef CONFIG_CMD_NAND
 
-/* LCD */
-
-#ifdef CONFIG_LCD
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
 #ifdef CONFIG_SYS_USE_MMC
 
 /* bootstrap + u-boot + env in sd card */

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #4 lore raw

PATCH 4/7 board: sama5d3xek: Convert to support DM_VIDEO

In reply to Wenyou Yang

From: Wenyou Yang <[email protected]>

Convert the board to enable the driver model support for LCD/video.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/dts/sama5d36ek_cmp.dts            |  1 +
 arch/arm/dts/sama5d3_lcd.dtsi              | 21 +------
 arch/arm/dts/sama5d3xdm.dtsi               | 26 +++++++++
 board/atmel/sama5d3xek/sama5d3xek.c        | 93 +-----------------------------
 configs/sama5d36ek_cmp_mmc_defconfig       |  3 +-
 configs/sama5d36ek_cmp_nandflash_defconfig |  3 +-
 configs/sama5d36ek_cmp_spiflash_defconfig  |  3 +-
 configs/sama5d3xek_mmc_defconfig           |  3 +-
 configs/sama5d3xek_nandflash_defconfig     |  3 +-
 configs/sama5d3xek_spiflash_defconfig      |  3 +-
 include/configs/sama5d3xek.h               | 12 ----
 11 files changed, 42 insertions(+), 129 deletions(-)

arch/arm/dts/sama5d36ek_cmp.dts +1 -0

index be41490f63..c17bc9f0dc 100644
@@ -8,6 +8,7 @@
 /dts-v1/;
 #include "sama5d36.dtsi"
 #include "sama5d3xmb_cmp.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D36-EK";

arch/arm/dts/sama5d3_lcd.dtsi +1 ~~-20~~

index 14d7c2bc75..10fb3a97ea 100644
@@ -14,31 +14,12 @@
 	ahb {
 		apb {
 			hlcdc: hlcdc at f0030000 {
-				compatible = "atmel,sama5d3-hlcdc";
+				compatible = "atmel,at91sam9x5-hlcdc";
 				reg = <0xf0030000 0x2000>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
 				clock-names = "periph_clk","sys_clk", "slow_clk";
 				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
 			};
 
 			pinctrl at fffff200 {

arch/arm/dts/sama5d3xdm.dtsi +26 -0

index 035ab72b39..b3df9af2b4 100644
@@ -10,6 +10,32 @@
 / {
 	ahb {
 		apb {
+			hlcdc: hlcdc at f0030000 {
+				atmel,vl-bpix = <4>;
+				atmel,output-mode = <24>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888_alt>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					800x480 {
+						clock-frequency = <24000000>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <5>;
+						hfront-porch = <64>;
+						hback-porch = <64>;
+						vfront-porch = <22>;
+						vback-porch = <21>;
+						vsync-len = <5>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
 			i2c1: i2c at f0018000 {
 				qt1070: keyboard at 1b {
 					compatible = "qt1070";

board/atmel/sama5d3xek/sama5d3xek.c +2 ~~-91~~

118 lines not on this page · raw message

configs/sama5d36ek_cmp_mmc_defconfig +2 -1

index d99baad0f6..a19fc0ba73 100644
@@ -49,5 +49,6 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y
-CONFIG_LCD=y
 CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d36ek_cmp_nandflash_defconfig +2 -1

index 4307f3ac9c..06448253da 100644
@@ -49,5 +49,6 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/sama5d36ek_cmp_spiflash_defconfig +2 -1

index 53bab325b7..734379a889 100644
@@ -49,5 +49,6 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/sama5d3xek_mmc_defconfig +2 -1

index 1836e5392f..bf620e58cd 100644
@@ -74,5 +74,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/sama5d3xek_nandflash_defconfig +2 -1

index c1860bd36d..252fd54f5d 100644
@@ -69,5 +69,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/sama5d3xek_spiflash_defconfig +2 -1

index 41bf96c036..d99d1aae9f 100644
@@ -70,5 +70,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

include/configs/sama5d3xek.h +0 ~~-12~~

index a5a0f7c32f..49cb237236 100644
@@ -28,18 +28,6 @@
  */
 #define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
 
-/* LCD */
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-/* board specific (not enough SRAM) */
-#define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
-
 /* NOR flash */
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #5 lore raw

PATCH 5/7 board: sama5d4ek: Convert to support DM_VIDEO

In reply to Wenyou Yang

From: Wenyou Yang <[email protected]>

Convert the board to enable the driver model support for LCD/video.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/dts/at91-sama5d4ek.dts       | 26 ++++++++++
 arch/arm/mach-at91/Kconfig            |  1 +
 board/atmel/sama5d4ek/sama5d4ek.c     | 97 +++--------------------------------
 configs/sama5d4ek_mmc_defconfig       |  3 +-
 configs/sama5d4ek_nandflash_defconfig |  3 +-
 configs/sama5d4ek_spiflash_defconfig  |  3 +-
 include/configs/sama5d4ek.h           |  9 ----
 7 files changed, 39 insertions(+), 103 deletions(-)

arch/arm/dts/at91-sama5d4ek.dts +26 -0

index b965f5b39d..a5d75452cf 100644
@@ -75,6 +75,32 @@
 
 	ahb {
 		apb {
+			hlcdc: hlcdc at f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,output-mode = <18>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					800x480 {
+						clock-frequency = <33260000>;
+						hactive = <800>;
+						vactive = <480>;
+						hsync-len = <5>;
+						hfront-porch = <128>;
+						hback-porch = <0>;
+						vfront-porch = <23>;
+						vback-porch = <22>;
+						vsync-len = <5>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
 			adc0: adc at fc034000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <

arch/arm/mach-at91/Kconfig +1 -0

index a52599ab5b..d2db644fcf 100644
@@ -123,6 +123,7 @@ config TARGET_SAMA5D4EK
 	select CPU_V7
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 
 config TARGET_MA5D4EVK
 	bool "Aries MA5D4EVK Evaluation Kit"

board/atmel/sama5d4ek/sama5d4ek.c +6 ~~-91~~

119 lines not on this page · raw message

configs/sama5d4ek_mmc_defconfig +2 -1

index a3909a0639..c1eefe3f45 100644
@@ -72,5 +72,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/sama5d4ek_nandflash_defconfig +2 -1

index c3d076e729..fb18ba8959 100644
@@ -69,4 +69,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d4ek_spiflash_defconfig +2 -1

index 7c6c8f27d6..88357bbcc4 100644
@@ -68,4 +68,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

include/configs/sama5d4ek.h +0 -9

index 09a9757e6e..ab0147738c 100644
@@ -47,15 +47,6 @@
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #endif
 
-/* LCD */
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  18
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
 #ifdef CONFIG_SYS_USE_SERIALFLASH
 /* override the bootcmd, bootargs and other configuration for spi flash env*/
 #elif CONFIG_SYS_USE_NANDFLASH

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #6 lore raw

PATCH 6/7 board: sama5d4_xplained: Convert to support DM_VIDEO

In reply to Wenyou Yang

From: Wenyou Yang <[email protected]>

Convert the board to enable the driver model support for LCD/video.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/dts/at91-sama5d4_xplained.dts          |  25 ++++++
 arch/arm/dts/sama5d4.dtsi                       |  21 +----
 arch/arm/mach-at91/Kconfig                      |   1 +
 board/atmel/common/video_display.c              |   2 +-
 board/atmel/sama5d4_xplained/sama5d4_xplained.c | 102 ++----------------------
 configs/sama5d4_xplained_mmc_defconfig          |   2 +
 configs/sama5d4_xplained_nandflash_defconfig    |   2 +
 configs/sama5d4_xplained_spiflash_defconfig     |   2 +
 include/configs/sama5d4_xplained.h              |  11 ---
 9 files changed, 40 insertions(+), 128 deletions(-)

arch/arm/dts/at91-sama5d4_xplained.dts +25 -0

index 0592b31b91..ea35dc21b6 100644
@@ -74,6 +74,31 @@
 
 	ahb {
 		apb {
+			hlcdc: hlcdc at f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
 			spi0: spi at f8010000 {
 				u-boot,dm-pre-reloc;
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;

arch/arm/dts/sama5d4.dtsi +1 ~~-20~~

index c6512ae437..8072b8a4f2 100644
@@ -320,31 +320,12 @@
 			u-boot,dm-pre-reloc;
 
 			hlcdc: hlcdc at f0000000 {
-				compatible = "atmel,sama5d4-hlcdc";
+				compatible = "atmel,at91sam9x5-hlcdc";
 				reg = <0xf0000000 0x4000>;
 				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
 				clock-names = "periph_clk","sys_clk", "slow_clk";
 				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
 			};
 
 			dma1: dma-controller at f0004000 {

arch/arm/mach-at91/Kconfig +1 -0

index d2db644fcf..3cc37f431b 100644
@@ -117,6 +117,7 @@ config TARGET_SAMA5D4_XPLAINED
 	select CPU_V7
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 
 config TARGET_SAMA5D4EK
 	bool "SAMA5D4 Evaluation Kit"

board/atmel/common/video_display.c +1 -1

index 39ad619819..b20abc7386 100644
@@ -43,7 +43,7 @@ int at91_video_show_board_info(void)
 	nand_size = 0;
 #ifdef CONFIG_NAND_ATMEL
 	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i]->size;
+		nand_size += get_nand_dev_by_index(i)->size;
 #endif
 
 	len += sprintf(&buf[len], "%ld MB SDRAM, %ld MB NAND\n",

board/atmel/sama5d4_xplained/sama5d4_xplained.c +6 ~~-96~~

124 lines not on this page · raw message

configs/sama5d4_xplained_mmc_defconfig +2 -0

index 928d828a1a..246d92f286 100644
@@ -74,3 +74,5 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_FAT_WRITE=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d4_xplained_nandflash_defconfig +2 -0

index c61d235384..694d767998 100644
@@ -70,3 +70,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d4_xplained_spiflash_defconfig +2 -0

index 7c8c7081e8..2e27e5f1ad 100644
@@ -72,3 +72,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

include/configs/sama5d4_xplained.h +0 ~~-11~~

index 67a8574940..ddb48c335a 100644
@@ -49,17 +49,6 @@
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #endif
 
-/* LCD */
-#ifdef CONFIG_LCD
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
 #ifdef CONFIG_SYS_USE_SERIALFLASH
 /* override the bootcmd, bootargs and other configuration for spi flash env */
 #elif CONFIG_SYS_USE_NANDFLASH

Signature · 1 line

2.13.0

Wenyou Yang

author

2017-07-31 06:02 UTC #7 lore raw

PATCH 7/7 board: at91sam9x5ek: Convert to support DM_VIDEO

In reply to Wenyou Yang

Convert the board to enable the driver model support for LCD/video.

Signed-off-by Wenyou Yang <[email protected]>

---

 arch/arm/mach-at91/Kconfig               |   1 +
 board/atmel/at91sam9x5ek/at91sam9x5ek.c  | 111 ++-----------------------------
 configs/at91sam9x5ek_dataflash_defconfig |   3 +-
 configs/at91sam9x5ek_mmc_defconfig       |   3 +-
 configs/at91sam9x5ek_nandflash_defconfig |   3 +-
 configs/at91sam9x5ek_spiflash_defconfig  |   3 +-
 include/configs/at91sam9x5ek.h           |  10 ---
 7 files changed, 16 insertions(+), 118 deletions(-)

arch/arm/mach-at91/Kconfig +1 -0

index 3cc37f431b..9f39e210b1 100644
@@ -85,6 +85,7 @@ config TARGET_AT91SAM9X5EK
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 
 config TARGET_SAMA5D2_PTC
 	bool "SAMA5D2 PTC board"

board/atmel/at91sam9x5ek/at91sam9x5ek.c +7 ~~-104~~

131 lines not on this page · raw message

configs/at91sam9x5ek_dataflash_defconfig +2 -1

index 8fc457b28c..fa1f7dffd9 100644
@@ -54,4 +54,5 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/at91sam9x5ek_mmc_defconfig +2 -1

index 1b76127934..04ff0a21c8 100644
@@ -54,5 +54,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
 CONFIG_FAT_WRITE=y

configs/at91sam9x5ek_nandflash_defconfig +2 -1

index 23ef8072a3..da983408b7 100644
@@ -54,4 +54,5 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/at91sam9x5ek_spiflash_defconfig +2 -1

index 48c2559c52..bc81f7ab50 100644
@@ -54,4 +54,5 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

include/configs/at91sam9x5ek.h +0 ~~-10~~

index 7e8a9e921a..7887791c37 100644
@@ -27,16 +27,6 @@
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
-/* LCD */
-#define LCD_BPP			LCD_COLOR16
-#define LCD_OUTPUT_BPP		24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
 /*
  * BOOTP options
  */

Signature · 1 line

2.13.0

Yang

2017-09-01 08:12 UTC #8 lore raw

cover board: atmel: Convert to support DM_VIDEO

In reply to Wenyou Yang

Quoted 9 lines · Wenyou Yang

Add a common code to display the company's logo and board information by using the API from DM_VIDEO under the board/$(VENDOR)/common folder, and the logo files can be used by the API from DM_VIDEO, and then convert the board to enable the driver model support for LCD/video.
It is based on the patch series:
	[PATCH v2 0/3] board: atmel: Set the ethernet mac address from eeprom
	https://lists.denx.de/pipermail/u-boot/2017-July/300527.html

Do you have any comments on this patch set?

Best Regards,
Wenyou Yang

Quoted 66 lines

  arch/arm/dts/at91-sama5d2_xplained.dts          |   60 ++
  arch/arm/dts/at91-sama5d4_xplained.dts          |   25 +
  arch/arm/dts/at91-sama5d4ek.dts                 |   26 +
  arch/arm/dts/sama5d2.dtsi                       |    7 +
  arch/arm/dts/sama5d36ek_cmp.dts                 |    1 +
  arch/arm/dts/sama5d3_lcd.dtsi                   |   21 +-
  arch/arm/dts/sama5d3xdm.dtsi                    |   26 +
  arch/arm/dts/sama5d4.dtsi                       |   21 +-
  arch/arm/mach-at91/Kconfig                      |    4 +
  arch/arm/mach-at91/include/mach/at91_common.h   |    1 +
  board/atmel/at91sam9x5ek/at91sam9x5ek.c         |  111 +-
  board/atmel/common/Makefile                     |    1 +
  board/atmel/common/video_display.c              |   72 ++
  board/atmel/sama5d2_xplained/sama5d2_xplained.c |   95 +-
  board/atmel/sama5d3xek/sama5d3xek.c             |   93 +-
  board/atmel/sama5d4_xplained/sama5d4_xplained.c |  102 +-
  board/atmel/sama5d4ek/sama5d4ek.c               |   97 +-
  configs/at91sam9x5ek_dataflash_defconfig        |    3 +-
  configs/at91sam9x5ek_mmc_defconfig              |    3 +-
  configs/at91sam9x5ek_nandflash_defconfig        |    3 +-
  configs/at91sam9x5ek_spiflash_defconfig         |    3 +-
  configs/sama5d2_xplained_mmc_defconfig          |    2 +
  configs/sama5d2_xplained_spiflash_defconfig     |    2 +
  configs/sama5d36ek_cmp_mmc_defconfig            |    3 +-
  configs/sama5d36ek_cmp_nandflash_defconfig      |    3 +-
  configs/sama5d36ek_cmp_spiflash_defconfig       |    3 +-
  configs/sama5d3xek_mmc_defconfig                |    3 +-
  configs/sama5d3xek_nandflash_defconfig          |    3 +-
  configs/sama5d3xek_spiflash_defconfig           |    3 +-
  configs/sama5d4_xplained_mmc_defconfig          |    2 +
  configs/sama5d4_xplained_nandflash_defconfig    |    2 +
  configs/sama5d4_xplained_spiflash_defconfig     |    2 +
  configs/sama5d4ek_mmc_defconfig                 |    3 +-
  configs/sama5d4ek_nandflash_defconfig           |    3 +-
  configs/sama5d4ek_spiflash_defconfig            |    3 +-
  include/atmel_lcd.h                             |    9 +
  include/configs/at91sam9x5ek.h                  |   10 -
  include/configs/sama5d2_xplained.h              |   12 -
  include/configs/sama5d3xek.h                    |   12 -
  include/configs/sama5d4_xplained.h              |   11 -
  include/configs/sama5d4ek.h                     |    9 -
  lib/Makefile                                    |    1 +
  lib/at91/Makefile                               |    8 +
  lib/at91/at91.c                                 |   30 +
  lib/at91/atmel_logo_8bpp.h                      | 1310 +++++++++++++++++++++++
  lib/at91/microchip_logo_8bpp.h                  | 1082 +++++++++++++++++++
  tools/logos/microchip.bmp                       |  Bin 0 -> 12726 bytes
  47 files changed, 2729 insertions(+), 577 deletions(-)

create mode 100644 board/atmel/common/video_display.c create mode 100644 lib/at91/Makefile
create mode 100644 lib/at91/at91.c
create mode 100644 lib/at91/atmel_logo_8bpp.h create mode 100644 lib/at91/microchip_logo_8bpp.h create mode 100644 tools/logos/microchip.bmp