Skip to contentSkip to conversation

drm/i915: Implement .get_format_info() hook for CCS

PATCH In review Ben Widawsky 4 participants 19 messages Jul 26, 2017 – Aug 3, 2017

Subsystems (38)
lore
Share & tools
lore
#0 lore raw

PATCH 1/6 drm/i915: Implement .get_format_info() hook for CCS

From: Ville Syrjälä <[email protected]>

SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.

By providing our own format information for the CCS formats, we should be able to make framebuffer_check() do the right thing for the CCS surface as well.

Note that we'll return the same format info for both Y and Yf tiled format as that's what happens with the non-CCS Y vs. Yf as well. If desired, we could potentially return a unique pointer for each pixel_format+tiling+ccs combination, in which case we immediately be able to tell if any of that stuff changed by just comparing the pointers. But that does sound a bit wasteful space wise.

v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)

---
 drivers/gpu/drm/drm_fourcc.c         |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++++++++++++++++++++++++
 include/drm/drm_mode_config.h        |  3 ++-
 include/uapi/drm/drm_fourcc.h        |  3 +++
 4 files changed, 43 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_fourcc.c +1 -1
index 9c0152df45ad..50da6180c495 100644
@@ -222,7 +222,7 @@ drm_get_format_info(struct drm_device *dev,
 	const struct drm_format_info *info = NULL;
 
 	if (dev->mode_config.funcs->get_format_info)
-		info = dev->mode_config.funcs->get_format_info(mode_cmd);
+		info = dev->mode_config.funcs->get_format_info(dev, mode_cmd);
 
 	if (!info)
 		info = drm_format_info(mode_cmd->pixel_format);
drivers/gpu/drm/i915/intel_display.c +37 -0
index f93d9a13b13a..0e71c7207258 100644
@@ -2428,6 +2428,42 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier)
 	}
 }
 
+static const struct drm_format_info ccs_formats[] = {
+	{ .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+	{ .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+	{ .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+	{ .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+};
+
+static const struct drm_format_info *
+lookup_format_info(const struct drm_format_info formats[],
+		   int num_formats, u32 format)
+{
+	int i;
+
+	for (i = 0; i < num_formats; i++) {
+		if (formats[i].format == format)
+			return &formats[i];
+	}
+
+	return NULL;
+}
+
+static const struct drm_format_info *
+intel_get_format_info(struct drm_device *dev,
+		      const struct drm_mode_fb_cmd2 *cmd)
+{
+	switch (cmd->modifier[0]) {
+	case I915_FORMAT_MOD_Y_TILED_CCS:
+	case I915_FORMAT_MOD_Yf_TILED_CCS:
+		return lookup_format_info(ccs_formats,
+					  ARRAY_SIZE(ccs_formats),
+					  cmd->pixel_format);
+	default:
+		return NULL;
+	}
+}
+
 static int
 intel_fill_fb_info(struct drm_i915_private *dev_priv,
 		   struct drm_framebuffer *fb)
@@ -13675,6 +13711,7 @@ static void intel_atomic_state_free(struct drm_atomic_state *state)
 
 static const struct drm_mode_config_funcs intel_mode_funcs = {
 	.fb_create = intel_user_framebuffer_create,
+	.get_format_info = intel_get_format_info,
 	.output_poll_changed = intel_fbdev_output_poll_changed,
 	.atomic_check = intel_atomic_check,
 	.atomic_commit = intel_atomic_commit,
include/drm/drm_mode_config.h +2 -1
index 42981711189b..f0d3d3857ae2 100644
@@ -81,7 +81,8 @@ struct drm_mode_config_funcs {
 	 * The format information specific to the given fb metadata, or
 	 * NULL if none is found.
 	 */
-	const struct drm_format_info *(*get_format_info)(const struct drm_mode_fb_cmd2 *mode_cmd);
+	const struct drm_format_info *(*get_format_info)(struct drm_device *dev,
+		const struct drm_mode_fb_cmd2 *mode_cmd);
 
 	/**
 	 * @output_poll_changed:
include/uapi/drm/drm_fourcc.h +3 -0
index 7586c46f68bf..ee5910944fac 100644
@@ -252,6 +252,9 @@ extern "C" {
  */
 #define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3)
 
+#define I915_FORMAT_MOD_Y_TILED_CCS	fourcc_mod_code(INTEL, 4)
+#define I915_FORMAT_MOD_Yf_TILED_CCS	fourcc_mod_code(INTEL, 5)
+
 /*
  * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks
  *
Signature · 6 lines
2.13.3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH 2/6 drm/i915: Add render decompression support

From: Ville Syrjälä <[email protected]>

SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.

Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume.

Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal,
but it works.

Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either.

This patch may contain work from at least the following people:
* Vandana Kannan <[email protected]>
* Daniel Vetter <[email protected]>
* Ben Widawsky <[email protected]>

v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes
s/return -EINVAL/goto err/ in intel_framebuffer_init()
Eliminate a bunch hardcoded numbers in CCS code

v5: (By Ben)
conflict resolution +
- res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
+ res_blocks += fixed16_to_u32_round_up(y_tile_minimum);

---
 drivers/gpu/drm/i915/i915_reg.h      |  23 ++++
 drivers/gpu/drm/i915/intel_display.c | 233 ++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_pm.c      |  29 ++++-
 drivers/gpu/drm/i915/intel_sprite.c  |   5 +
 4 files changed, 272 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +23 -0
index 1dc7e7a2a23b..c2a6c107f551 100644
@@ -6134,6 +6134,10 @@ enum {
 #define _PLANE_KEYMSK_2_A			0x70298
 #define _PLANE_KEYMAX_1_A			0x701a0
 #define _PLANE_KEYMAX_2_A			0x702a0
+#define _PLANE_AUX_DIST_1_A			0x701c0
+#define _PLANE_AUX_DIST_2_A			0x702c0
+#define _PLANE_AUX_OFFSET_1_A			0x701c4
+#define _PLANE_AUX_OFFSET_2_A			0x702c4
 #define _PLANE_COLOR_CTL_1_A			0x701CC /* GLK+ */
 #define _PLANE_COLOR_CTL_2_A			0x702CC /* GLK+ */
 #define _PLANE_COLOR_CTL_3_A			0x703CC /* GLK+ */
@@ -6240,6 +6244,24 @@ enum {
 #define PLANE_NV12_BUF_CFG(pipe, plane)	\
 	_MMIO_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe))
 
+#define _PLANE_AUX_DIST_1_B		0x711c0
+#define _PLANE_AUX_DIST_2_B		0x712c0
+#define _PLANE_AUX_DIST_1(pipe) \
+			_PIPE(pipe, _PLANE_AUX_DIST_1_A, _PLANE_AUX_DIST_1_B)
+#define _PLANE_AUX_DIST_2(pipe) \
+			_PIPE(pipe, _PLANE_AUX_DIST_2_A, _PLANE_AUX_DIST_2_B)
+#define PLANE_AUX_DIST(pipe, plane)     \
+	_MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe))
+
+#define _PLANE_AUX_OFFSET_1_B		0x711c4
+#define _PLANE_AUX_OFFSET_2_B		0x712c4
+#define _PLANE_AUX_OFFSET_1(pipe)       \
+		_PIPE(pipe, _PLANE_AUX_OFFSET_1_A, _PLANE_AUX_OFFSET_1_B)
+#define _PLANE_AUX_OFFSET_2(pipe)       \
+		_PIPE(pipe, _PLANE_AUX_OFFSET_2_A, _PLANE_AUX_OFFSET_2_B)
+#define PLANE_AUX_OFFSET(pipe, plane)   \
+	_MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe))
+
 #define _PLANE_COLOR_CTL_1_B			0x711CC
 #define _PLANE_COLOR_CTL_2_B			0x712CC
 #define _PLANE_COLOR_CTL_3_B			0x713CC
@@ -6723,6 +6745,7 @@ enum {
 # define CHICKEN3_DGMG_DONE_FIX_DISABLE		(1 << 2)
 
 #define CHICKEN_PAR1_1		_MMIO(0x42080)
+#define  SKL_RC_HASH_OUTSIDE	(1 << 15)
 #define  DPA_MASK_VBLANK_SRD	(1 << 15)
 #define  FORCE_ARB_IDLE_PLANES	(1 << 14)
 #define  SKL_EDP_PSR_FIX_RDWRAP	(1 << 3)
drivers/gpu/drm/i915/intel_display.c +217 -16

361 lines not on this page · raw message

drivers/gpu/drm/i915/intel_pm.c +27 -2
index 48785ef75d33..85ee779c2942 100644
@@ -62,6 +62,20 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
 	I915_WRITE(CHICKEN_PAR1_1,
 		   I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
 
+	/*
+	 * Display WA#0390: skl,bxt,kbl,glk
+	 *
+	 * Must match Sampler, Pixel Back End, and Media
+	 * (0xE194 bit 8, 0x7014 bit 13, 0x4DDC bits 27 and 31).
+	 *
+	 * Including bits outside the page in the hash would
+	 * require 2 (or 4?) MiB alignment of resources. Just
+	 * assume the defaul hashing mode which only uses bits
+	 * within the page.
+	 */
+	I915_WRITE(CHICKEN_PAR1_1,
+		   I915_READ(CHICKEN_PAR1_1) & ~SKL_RC_HASH_OUTSIDE);
+
 	I915_WRITE(GEN8_CONFIG0,
 		   I915_READ(GEN8_CONFIG0) | GEN9_DEFAULT_FIXES);
 
@@ -4071,7 +4085,9 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
 
 	/* For Non Y-tile return 8-blocks */
 	if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
-	    fb->modifier != I915_FORMAT_MOD_Yf_TILED)
+	    fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
+	    fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
+	    fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
 		return 8;
 
 	/*
@@ -4377,7 +4393,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	}
 
 	y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
-		  fb->modifier == I915_FORMAT_MOD_Yf_TILED;
+		  fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
+		  fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
+		  fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
 	x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
 
 	/* Display WA #1141: kbl,cfl */
@@ -4472,6 +4490,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	res_lines = div_round_up_fixed16(selected_result,
 					 plane_blocks_per_line);
 
+	/* Display WA #1125: skl,bxt,kbl,glk */
+	if (level == 0 &&
+	    (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
+	     fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS))
+		res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
+
+	/* Display WA #1126: skl,bxt,kbl,glk */
 	if (level >= 1 && level <= 7) {
 		if (y_tiled) {
 			res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
drivers/gpu/drm/i915/intel_sprite.c +5 -0
index 8e25694a1508..3d704bd72e2a 100644
@@ -238,6 +238,7 @@ skl_update_plane(struct intel_plane *plane,
 	u32 surf_addr = plane_state->main.offset;
 	unsigned int rotation = plane_state->base.rotation;
 	u32 stride = skl_plane_stride(fb, 0, rotation);
+	u32 aux_stride = skl_plane_stride(fb, 1, rotation);
 	int crtc_x = plane_state->base.dst.x1;
 	int crtc_y = plane_state->base.dst.y1;
 	uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
@@ -272,6 +273,10 @@ skl_update_plane(struct intel_plane *plane,
 	I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
 	I915_WRITE_FW(PLANE_STRIDE(pipe, plane_id), stride);
 	I915_WRITE_FW(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
+	I915_WRITE_FW(PLANE_AUX_DIST(pipe, plane_id),
+		      (plane_state->aux.offset - surf_addr) | aux_stride);
+	I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
+		      (plane_state->aux.y << 16) | plane_state->aux.x);
 
 	/* program plane scaler */
 	if (plane_state->scaler_id >= 0) {
Signature · 6 lines
2.13.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH 2/6] drm/i915: Add render decompression support

Hi,

Quoted 28 lines · Ben Widawsky

Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal,
but it works.

Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either.

This patch may contain work from at least the following people:
* Vandana Kannan <[email protected]>
* Daniel Vetter <[email protected]>
* Ben Widawsky <[email protected]>

v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes
s/return -EINVAL/goto err/ in intel_framebuffer_init()
Eliminate a bunch hardcoded numbers in CCS code

v5: (By Ben)
conflict resolution +

Review

Quoted 2 lines
(quoted diff) +1 -1
-               res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
+               res_blocks += fixed16_to_u32_round_up(y_tile_minimum);

':set paste' is your friend :P

Cheers,
Daniel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

PATCH 3/6 drm: Plumb modifiers through plane init

In reply to Ben Widawsky

This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel)

v7: Add sun8i (Daniel)

---
 drivers/gpu/drm/arc/arcpgu_crtc.c               |  1 +
 drivers/gpu/drm/arm/hdlcd_crtc.c                |  1 +
 drivers/gpu/drm/arm/malidp_planes.c             |  2 +-
 drivers/gpu/drm/armada/armada_crtc.c            |  1 +
 drivers/gpu/drm/armada/armada_overlay.c         |  1 +
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c |  3 ++-
 drivers/gpu/drm/drm_modeset_helper.c            |  1 +
 drivers/gpu/drm/drm_plane.c                     | 36 ++++++++++++++++++++++++-
 drivers/gpu/drm/drm_simple_kms_helper.c         |  3 +++
 drivers/gpu/drm/exynos/exynos_drm_plane.c       |  2 +-
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c     |  2 +-
 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c  |  1 +
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c |  2 +-
 drivers/gpu/drm/i915/intel_display.c            |  5 +++-
 drivers/gpu/drm/i915/intel_sprite.c             |  4 +--
 drivers/gpu/drm/imx/ipuv3-plane.c               |  4 +--
 drivers/gpu/drm/mediatek/mtk_drm_plane.c        |  2 +-
 drivers/gpu/drm/meson/meson_plane.c             |  1 +
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c       |  2 +-
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c       |  4 +--
 drivers/gpu/drm/mxsfb/mxsfb_drv.c               |  2 +-
 drivers/gpu/drm/nouveau/nv50_display.c          |  5 ++--
 drivers/gpu/drm/omapdrm/omap_plane.c            |  2 +-
 drivers/gpu/drm/pl111/pl111_display.c           |  2 +-
 drivers/gpu/drm/qxl/qxl_display.c               |  2 +-
 drivers/gpu/drm/rcar-du/rcar_du_plane.c         |  4 +--
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c           |  4 +--
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c     |  4 +--
 drivers/gpu/drm/sti/sti_cursor.c                |  2 +-
 drivers/gpu/drm/sti/sti_gdp.c                   |  2 +-
 drivers/gpu/drm/sti/sti_hqvdp.c                 |  2 +-
 drivers/gpu/drm/stm/ltdc.c                      |  2 +-
 drivers/gpu/drm/sun4i/sun4i_layer.c             |  2 +-
 drivers/gpu/drm/sun4i/sun8i_layer.c             |  2 +-
 drivers/gpu/drm/tegra/dc.c                      | 12 ++++-----
 drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c     |  2 +-
 drivers/gpu/drm/vc4/vc4_plane.c                 |  2 +-
 drivers/gpu/drm/virtio/virtgpu_plane.c          |  2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c             |  4 +--
 drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c            |  4 +--
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c            |  4 +--
 drivers/gpu/drm/zte/zx_plane.c                  |  2 +-
 include/drm/drm_plane.h                         | 22 ++++++++++++++-
 include/drm/drm_simple_kms_helper.h             |  1 +
 include/uapi/drm/drm_fourcc.h                   | 11 ++++++++
 45 files changed, 131 insertions(+), 50 deletions(-)
drivers/gpu/drm/arc/arcpgu_crtc.c +1 -0
index 1859dd3ad622..799416651f2f 100644
@@ -217,6 +217,7 @@ static struct drm_plane *arc_pgu_plane_init(struct drm_device *drm)
 
 	ret = drm_universal_plane_init(drm, plane, 0xff, &arc_pgu_plane_funcs,
 				       formats, ARRAY_SIZE(formats),
+				       NULL,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret)
 		return ERR_PTR(ret);
drivers/gpu/drm/arm/hdlcd_crtc.c +1 -0
index 16e1e20cf04c..72b22b805412 100644
@@ -315,6 +315,7 @@ static struct drm_plane *hdlcd_plane_init(struct drm_device *drm)
 
 	ret = drm_universal_plane_init(drm, plane, 0xff, &hdlcd_plane_funcs,
 				       formats, ARRAY_SIZE(formats),
+				       NULL,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		return ERR_PTR(ret);
drivers/gpu/drm/arm/malidp_planes.c +1 -1
index 600fa7bd7f52..60402e27882f 100644
@@ -398,7 +398,7 @@ int malidp_de_planes_init(struct drm_device *drm)
 					DRM_PLANE_TYPE_OVERLAY;
 		ret = drm_universal_plane_init(drm, &plane->base, crtcs,
 					       &malidp_de_plane_funcs, formats,
-					       n, plane_type, NULL);
+					       n, NULL, plane_type, NULL);
 		if (ret < 0)
 			goto cleanup;
 
drivers/gpu/drm/armada/armada_crtc.c +1 -0
index 1ffba91fbaae..1d01ad24fe52 100644
@@ -1269,6 +1269,7 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
 				       &armada_primary_plane_funcs,
 				       armada_primary_formats,
 				       ARRAY_SIZE(armada_primary_formats),
+				       NULL,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		kfree(primary);
drivers/gpu/drm/armada/armada_overlay.c +1 -0
index 677b44f3534b..edc44910d79f 100644
@@ -460,6 +460,7 @@ int armada_overlay_plane_create(struct drm_device *dev, unsigned long crtcs)
 				       &armada_ovl_plane_funcs,
 				       armada_ovl_formats,
 				       ARRAY_SIZE(armada_ovl_formats),
+				       NULL,
 				       DRM_PLANE_TYPE_OVERLAY, NULL);
 	if (ret) {
 		kfree(dplane);
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +2 -1
index b5bd9b005225..ba532bf101e0 100644
@@ -1087,7 +1087,8 @@ static int atmel_hlcdc_plane_create(struct drm_device *dev,
 	ret = drm_universal_plane_init(dev, &plane->base, 0,
 				       &layer_plane_funcs,
 				       desc->formats->formats,
-				       desc->formats->nformats, type, NULL);
+				       desc->formats->nformats,
+				       NULL, type, NULL);
 	if (ret)
 		return ret;
 
drivers/gpu/drm/drm_modeset_helper.c +1 -0
index 2b33825f2f93..9cb1eede0b4d 100644
@@ -124,6 +124,7 @@ static struct drm_plane *create_primary_plane(struct drm_device *dev)
 				       &drm_primary_helper_funcs,
 				       safe_modeset_formats,
 				       ARRAY_SIZE(safe_modeset_formats),
+				       NULL,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		kfree(primary);
drivers/gpu/drm/drm_plane.c +35 -1
index 5dc8c4350602..d3fc561d7b48 100644
@@ -70,6 +70,8 @@ static unsigned int drm_num_planes(struct drm_device *dev)
  * @funcs: callbacks for the new plane
  * @formats: array of supported formats (DRM_FORMAT\_\*)
  * @format_count: number of elements in @formats
+ * @format_modifiers: array of struct drm_format modifiers terminated by
+ *                    DRM_FORMAT_MOD_INVALID
  * @type: type of plane (overlay, primary, cursor)
  * @name: printf style format string for the plane name, or NULL for default name
  *
@@ -82,10 +84,12 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
 			     uint32_t possible_crtcs,
 			     const struct drm_plane_funcs *funcs,
 			     const uint32_t *formats, unsigned int format_count,
+			     const uint64_t *format_modifiers,
 			     enum drm_plane_type type,
 			     const char *name, ...)
 {
 	struct drm_mode_config *config = &dev->mode_config;
+	unsigned int format_modifier_count = 0;
 	int ret;
 
 	ret = drm_mode_object_add(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
@@ -105,6 +109,31 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		return -ENOMEM;
 	}
 
+	/*
+	 * First driver to need more than 64 formats needs to fix this. Each
+	 * format is encoded as a bit and the current code only supports a u64.
+	 */
+	if (WARN_ON(format_count > 64))
+		return -EINVAL;
+
+	if (format_modifiers) {
+		const uint64_t *temp_modifiers = format_modifiers;
+		while (*temp_modifiers++ != DRM_FORMAT_MOD_INVALID)
+			format_modifier_count++;
+	}
+
+	plane->modifier_count = format_modifier_count;
+	plane->modifiers = kmalloc_array(format_modifier_count,
+					 sizeof(format_modifiers[0]),
+					 GFP_KERNEL);
+
+	if (format_modifier_count && !plane->modifiers) {
+		DRM_DEBUG_KMS("out of memory when allocating plane\n");
+		kfree(plane->format_types);
+		drm_mode_object_unregister(dev, &plane->base);
+		return -ENOMEM;
+	}
+
 	if (name) {
 		va_list ap;
 
@@ -117,12 +146,15 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
 	}
 	if (!plane->name) {
 		kfree(plane->format_types);
+		kfree(plane->modifiers);
 		drm_mode_object_unregister(dev, &plane->base);
 		return -ENOMEM;
 	}
 
 	memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
 	plane->format_count = format_count;
+	memcpy(plane->modifiers, format_modifiers,
+	       format_modifier_count * sizeof(format_modifiers[0]));
 	plane->possible_crtcs = possible_crtcs;
 	plane->type = type;
 
@@ -205,7 +237,8 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
 
 	type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
 	return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
-					formats, format_count, type, NULL);
+					formats, format_count,
+					NULL, type, NULL);
 }
 EXPORT_SYMBOL(drm_plane_init);
 
@@ -224,6 +257,7 @@ void drm_plane_cleanup(struct drm_plane *plane)
 	drm_modeset_lock_fini(&plane->mutex);
 
 	kfree(plane->format_types);
+	kfree(plane->modifiers);
 	drm_mode_object_unregister(dev, &plane->base);
 
 	BUG_ON(list_empty(&plane->head));
drivers/gpu/drm/drm_simple_kms_helper.c +3 -0
index 39c203ad59db..dc9fd109de14 100644
@@ -199,6 +199,7 @@ EXPORT_SYMBOL(drm_simple_display_pipe_attach_bridge);
  * @funcs: callbacks for the display pipe (optional)
  * @formats: array of supported formats (DRM_FORMAT\_\*)
  * @format_count: number of elements in @formats
+ * @format_modifiers: array of formats modifiers
  * @connector: connector to attach and register (optional)
  *
  * Sets up a display pipeline which consist of a really simple
@@ -219,6 +220,7 @@ int drm_simple_display_pipe_init(struct drm_device *dev,
 			struct drm_simple_display_pipe *pipe,
 			const struct drm_simple_display_pipe_funcs *funcs,
 			const uint32_t *formats, unsigned int format_count,
+			const uint64_t *format_modifiers,
 			struct drm_connector *connector)
 {
 	struct drm_encoder *encoder = &pipe->encoder;
@@ -233,6 +235,7 @@ int drm_simple_display_pipe_init(struct drm_device *dev,
 	ret = drm_universal_plane_init(dev, plane, 0,
 				       &drm_simple_kms_plane_funcs,
 				       formats, format_count,
+				       format_modifiers,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret)
 		return ret;
drivers/gpu/drm/exynos/exynos_drm_plane.c +1 -1
index 611b6fd65433..e5099bc9f21a 100644
@@ -283,7 +283,7 @@ int exynos_plane_init(struct drm_device *dev,
 				       &exynos_plane_funcs,
 				       config->pixel_formats,
 				       config->num_pixel_formats,
-				       config->type, NULL);
+				       NULL, config->type, NULL);
 	if (err) {
 		DRM_ERROR("failed to initialize plane\n");
 		return err;
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c +1 -1
index 0a20723aa6e1..9554b245746e 100644
@@ -224,7 +224,7 @@ struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
 				       &fsl_dcu_drm_plane_funcs,
 				       fsl_dcu_drm_plane_formats,
 				       ARRAY_SIZE(fsl_dcu_drm_plane_formats),
-				       DRM_PLANE_TYPE_PRIMARY, NULL);
+				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		kfree(primary);
 		primary = NULL;
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c +1 -0
index 54a4542a40f1..bec0a8726c6b 100644
@@ -181,6 +181,7 @@ static struct drm_plane *hibmc_plane_init(struct hibmc_drm_private *priv)
 	ret = drm_universal_plane_init(dev, plane, 1, &hibmc_plane_funcs,
 				       channel_formats1,
 				       ARRAY_SIZE(channel_formats1),
+				       NULL,
 				       DRM_PLANE_TYPE_PRIMARY,
 				       NULL);
 	if (ret) {
drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c +1 -1
index 706efd0c4190..9882ebd8751c 100644
@@ -910,7 +910,7 @@ static int ade_plane_init(struct drm_device *dev, struct ade_plane *aplane,
 		return ret;
 
 	ret = drm_universal_plane_init(dev, &aplane->base, 1, &ade_plane_funcs,
-				       fmts, fmts_cnt, type, NULL);
+				       fmts, fmts_cnt, NULL, type, NULL);
 	if (ret) {
 		DRM_ERROR("fail to init plane, ch=%d\n", aplane->ch);
 		return ret;
drivers/gpu/drm/i915/intel_display.c +4 -1
index 27cde89c157d..0381a1734396 100644
@@ -13055,18 +13055,21 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
+					       NULL,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "plane 1%c", pipe_name(pipe));
 	else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
+					       NULL,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "primary %c", pipe_name(pipe));
 	else
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
+					       NULL,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "plane %c", plane_name(primary->plane));
 	if (ret)
@@ -13152,7 +13155,7 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv,
 				       0, &intel_cursor_plane_funcs,
 				       intel_cursor_formats,
 				       ARRAY_SIZE(intel_cursor_formats),
-				       DRM_PLANE_TYPE_CURSOR,
+				       NULL, DRM_PLANE_TYPE_CURSOR,
 				       "cursor %c", pipe_name(pipe));
 	if (ret)
 		goto fail;
drivers/gpu/drm/i915/intel_sprite.c +2 -2
index 3d704bd72e2a..4bf0d3e4ad91 100644
@@ -1170,13 +1170,13 @@ intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 		ret = drm_universal_plane_init(&dev_priv->drm, &intel_plane->base,
 					       possible_crtcs, &intel_plane_funcs,
 					       plane_formats, num_plane_formats,
-					       DRM_PLANE_TYPE_OVERLAY,
+					       NULL, DRM_PLANE_TYPE_OVERLAY,
 					       "plane %d%c", plane + 2, pipe_name(pipe));
 	else
 		ret = drm_universal_plane_init(&dev_priv->drm, &intel_plane->base,
 					       possible_crtcs, &intel_plane_funcs,
 					       plane_formats, num_plane_formats,
-					       DRM_PLANE_TYPE_OVERLAY,
+					       NULL, DRM_PLANE_TYPE_OVERLAY,
 					       "sprite %c", sprite_name(pipe, plane));
 	if (ret)
 		goto fail;
drivers/gpu/drm/imx/ipuv3-plane.c +2 -2
index 0847cc0d96a4..debde2dae7bf 100644
@@ -718,8 +718,8 @@ struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
 
 	ret = drm_universal_plane_init(dev, &ipu_plane->base, possible_crtcs,
 				       &ipu_plane_funcs, ipu_plane_formats,
-				       ARRAY_SIZE(ipu_plane_formats), type,
-				       NULL);
+				       ARRAY_SIZE(ipu_plane_formats),
+				       NULL, type, NULL);
 	if (ret) {
 		DRM_ERROR("failed to initialize plane\n");
 		kfree(ipu_plane);
drivers/gpu/drm/mediatek/mtk_drm_plane.c +1 -1
index 1a59b9ab4aa8..6f121891430f 100644
@@ -175,7 +175,7 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 
 	err = drm_universal_plane_init(dev, plane, possible_crtcs,
 				       &mtk_plane_funcs, formats,
-				       ARRAY_SIZE(formats), type, NULL);
+				       ARRAY_SIZE(formats), NULL, type, NULL);
 	if (err) {
 		DRM_ERROR("failed to initialize plane\n");
 		return err;
drivers/gpu/drm/meson/meson_plane.c +1 -0
index a32d3b6e2e12..17e96fa47868 100644
@@ -223,6 +223,7 @@ int meson_plane_create(struct meson_drm *priv)
 				 &meson_plane_funcs,
 				 supported_drm_formats,
 				 ARRAY_SIZE(supported_drm_formats),
+				 NULL,
 				 DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
 
 	drm_plane_helper_add(plane, &meson_plane_helper_funcs);
drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c +1 -1
index a20e3d644523..7a1ad3af08e3 100644
@@ -401,7 +401,7 @@ struct drm_plane *mdp4_plane_init(struct drm_device *dev,
 	type = private_plane ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
 	ret = drm_universal_plane_init(dev, plane, 0xff, &mdp4_plane_funcs,
 				 mdp4_plane->formats, mdp4_plane->nformats,
-				 type, NULL);
+				 NULL, type, NULL);
 	if (ret)
 		goto fail;
 
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +2 -2
index fe3a4de1a433..61dfea791f3f 100644
@@ -1139,12 +1139,12 @@ struct drm_plane *mdp5_plane_init(struct drm_device *dev,
 		ret = drm_universal_plane_init(dev, plane, 0xff,
 				&mdp5_cursor_plane_funcs,
 				mdp5_plane->formats, mdp5_plane->nformats,
-				type, NULL);
+				NULL, type, NULL);
 	else
 		ret = drm_universal_plane_init(dev, plane, 0xff,
 				&mdp5_plane_funcs,
 				mdp5_plane->formats, mdp5_plane->nformats,
-				type, NULL);
+				NULL, type, NULL);
 	if (ret)
 		goto fail;
 
drivers/gpu/drm/mxsfb/mxsfb_drv.c +1 -1
index a34f41ce3599..93c38eb6d187 100644
@@ -190,7 +190,7 @@ static int mxsfb_load(struct drm_device *drm, unsigned long flags)
 	}
 
 	ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
-			mxsfb_formats, ARRAY_SIZE(mxsfb_formats),
+			mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
 			&mxsfb->connector);
 	if (ret < 0) {
 		dev_err(drm->dev, "Cannot setup simple display pipe\n");
drivers/gpu/drm/nouveau/nv50_display.c +3 -2
index 9d40b2a8be4d..099f05f8613d 100644
@@ -1083,8 +1083,9 @@ nv50_wndw_ctor(const struct nv50_wndw_func *func, struct drm_device *dev,
 	wndw->func = func;
 	wndw->dmac = dmac;
 
-	ret = drm_universal_plane_init(dev, &wndw->plane, 0, &nv50_wndw, format,
-				       nformat, type, "%s-%d", name, index);
+	ret = drm_universal_plane_init(dev, &wndw->plane, 0, &nv50_wndw,
+				       format, nformat, NULL,
+				       type, "%s-%d", name, index);
 	if (ret)
 		return ret;
 
drivers/gpu/drm/omapdrm/omap_plane.c +1 -1
index 2160f64548e0..b92a8f1d0155 100644
@@ -291,7 +291,7 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
 
 	ret = drm_universal_plane_init(dev, plane, possible_crtcs,
 				       &omap_plane_funcs, formats,
-				       nformats, type, NULL);
+				       nformats, NULL, type, NULL);
 	if (ret < 0)
 		goto error;
 
drivers/gpu/drm/pl111/pl111_display.c +1 -1
index c6ca4f1bbd49..f0139fa58d55 100644
@@ -457,7 +457,7 @@ int pl111_display_init(struct drm_device *drm)
 	ret = drm_simple_display_pipe_init(drm, &priv->pipe,
 					   &pl111_display_funcs,
 					   formats, ARRAY_SIZE(formats),
-					   &priv->connector.connector);
+					   NULL, &priv->connector.connector);
 	if (ret)
 		return ret;
 
drivers/gpu/drm/qxl/qxl_display.c +1 -1
index 5eeae89c138d..14c5613b4388 100644
@@ -784,7 +784,7 @@ static struct drm_plane *qxl_create_plane(struct qxl_device *qdev,
 
 	err = drm_universal_plane_init(&qdev->ddev, plane, possible_crtcs,
 				       funcs, formats, num_formats,
-				       type, NULL);
+				       NULL, type, NULL);
 	if (err)
 		goto free_plane;
 
drivers/gpu/drm/rcar-du/rcar_du_plane.c +2 -2
index dcde6288da6c..2b02eccbfb70 100644
@@ -743,8 +743,8 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp)
 
 		ret = drm_universal_plane_init(rcdu->ddev, &plane->plane, crtcs,
 					       &rcar_du_plane_funcs, formats,
-					       ARRAY_SIZE(formats), type,
-					       NULL);
+					       ARRAY_SIZE(formats),
+					       NULL, type, NULL);
 		if (ret < 0)
 			return ret;
 
drivers/gpu/drm/rcar-du/rcar_du_vsp.c +2 -2
index f870445ebc8d..7362d80d236b 100644
@@ -439,8 +439,8 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp)
 					       1 << vsp->index,
 					       &rcar_du_vsp_plane_funcs,
 					       formats_kms,
-					       ARRAY_SIZE(formats_kms), type,
-					       NULL);
+					       ARRAY_SIZE(formats_kms),
+					       NULL, type, NULL);
 		if (ret < 0)
 			return ret;
 
drivers/gpu/drm/rockchip/rockchip_drm_vop.c +2 -2
index 9434d616bc37..1001f32a248b 100644
@@ -1293,7 +1293,7 @@ static int vop_create_crtc(struct vop *vop)
 					       0, &vop_plane_funcs,
 					       win_data->phy->data_formats,
 					       win_data->phy->nformats,
-					       win_data->type, NULL);
+					       NULL, win_data->type, NULL);
 		if (ret) {
 			DRM_DEV_ERROR(vop->dev, "failed to init plane %d\n",
 				      ret);
@@ -1332,7 +1332,7 @@ static int vop_create_crtc(struct vop *vop)
 					       &vop_plane_funcs,
 					       win_data->phy->data_formats,
 					       win_data->phy->nformats,
-					       win_data->type, NULL);
+					       NULL, win_data->type, NULL);
 		if (ret) {
 			DRM_DEV_ERROR(vop->dev, "failed to init overlay %d\n",
 				      ret);
drivers/gpu/drm/sti/sti_cursor.c +1 -1
index 5b3a41f74f21..f31cbe898eb3 100644
@@ -392,7 +392,7 @@ struct drm_plane *sti_cursor_create(struct drm_device *drm_dev,
 				       &sti_cursor_plane_helpers_funcs,
 				       cursor_supported_formats,
 				       ARRAY_SIZE(cursor_supported_formats),
-				       DRM_PLANE_TYPE_CURSOR, NULL);
+				       NULL, DRM_PLANE_TYPE_CURSOR, NULL);
 	if (res) {
 		DRM_ERROR("Failed to initialize universal plane\n");
 		goto err_plane;
drivers/gpu/drm/sti/sti_gdp.c +1 -1
index 5ee0503945c8..dceedbe702d7 100644
@@ -931,7 +931,7 @@ struct drm_plane *sti_gdp_create(struct drm_device *drm_dev,
 				       &sti_gdp_plane_helpers_funcs,
 				       gdp_supported_formats,
 				       ARRAY_SIZE(gdp_supported_formats),
-				       type, NULL);
+				       NULL, type, NULL);
 	if (res) {
 		DRM_ERROR("Failed to initialize universal plane\n");
 		goto err;
drivers/gpu/drm/sti/sti_hqvdp.c +1 -1
index 53a46dda8bd5..f11230853116 100644
@@ -1298,7 +1298,7 @@ static struct drm_plane *sti_hqvdp_create(struct drm_device *drm_dev,
 				       &sti_hqvdp_plane_helpers_funcs,
 				       hqvdp_supported_formats,
 				       ARRAY_SIZE(hqvdp_supported_formats),
-				       DRM_PLANE_TYPE_OVERLAY, NULL);
+				       NULL, DRM_PLANE_TYPE_OVERLAY, NULL);
 	if (res) {
 		DRM_ERROR("Failed to initialize universal plane\n");
 		return NULL;
drivers/gpu/drm/stm/ltdc.c +1 -1
index 04cc66d6b96f..ae9eb0fff06b 100644
@@ -735,7 +735,7 @@ static struct drm_plane *ltdc_plane_create(struct drm_device *ddev,
 
 	ret = drm_universal_plane_init(ddev, plane, possible_crtcs,
 				       &ltdc_plane_funcs, formats, nb_fmt,
-				       type, NULL);
+				       NULL, type, NULL);
 	if (ret < 0)
 		return 0;
 
drivers/gpu/drm/sun4i/sun4i_layer.c +1 -1
index ead4f9d4c1ee..d45f3a1a0a29 100644
@@ -115,7 +115,7 @@ static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
 	ret = drm_universal_plane_init(drm, &layer->plane, 0,
 				       &sun4i_backend_layer_funcs,
 				       plane->formats, plane->nformats,
-				       plane->type, NULL);
+				       NULL, plane->type, NULL);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialize layer\n");
 		return ERR_PTR(ret);
drivers/gpu/drm/sun4i/sun8i_layer.c +1 -1
index e627eeece658..23810ff72684 100644
@@ -90,7 +90,7 @@ static struct sun8i_layer *sun8i_layer_init_one(struct drm_device *drm,
 	ret = drm_universal_plane_init(drm, &layer->plane, 0,
 				       &sun8i_mixer_layer_funcs,
 				       plane->formats, plane->nformats,
-				       plane->type, NULL);
+				       NULL, plane->type, NULL);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialize layer\n");
 		return ERR_PTR(ret);
drivers/gpu/drm/tegra/dc.c +6 -6
index 0cb9b90e2e68..4df39112e38e 100644
@@ -678,8 +678,8 @@ static struct drm_plane *tegra_dc_primary_plane_create(struct drm_device *drm,
 
 	err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
 				       &tegra_primary_plane_funcs, formats,
-				       num_formats, DRM_PLANE_TYPE_PRIMARY,
-				       NULL);
+				       num_formats, NULL,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (err < 0) {
 		kfree(plane);
 		return ERR_PTR(err);
@@ -844,8 +844,8 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
 
 	err = drm_universal_plane_init(drm, &plane->base, 1 << dc->pipe,
 				       &tegra_cursor_plane_funcs, formats,
-				       num_formats, DRM_PLANE_TYPE_CURSOR,
-				       NULL);
+				       num_formats, NULL,
+				       DRM_PLANE_TYPE_CURSOR, NULL);
 	if (err < 0) {
 		kfree(plane);
 		return ERR_PTR(err);
@@ -906,8 +906,8 @@ static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
 
 	err = drm_universal_plane_init(drm, &plane->base, 1 << dc->pipe,
 				       &tegra_overlay_plane_funcs, formats,
-				       num_formats, DRM_PLANE_TYPE_OVERLAY,
-				       NULL);
+				       num_formats, NULL,
+				       DRM_PLANE_TYPE_OVERLAY, NULL);
 	if (err < 0) {
 		kfree(plane);
 		return ERR_PTR(err);
drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c +1 -1
index ec43fb7ad9e4..26823a4a07d8 100644
@@ -225,7 +225,7 @@ tinydrm_display_pipe_init(struct tinydrm_device *tdev,
 		return PTR_ERR(connector);
 
 	ret = drm_simple_display_pipe_init(drm, &tdev->pipe, funcs, formats,
-					   format_count, connector);
+					   format_count, NULL, connector);
 	if (ret)
 		return ret;
 
drivers/gpu/drm/vc4/vc4_plane.c +1 -1
index 8853e9a4f005..2968b3ebb895 100644
@@ -902,7 +902,7 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
 	ret = drm_universal_plane_init(dev, plane, 0,
 				       &vc4_plane_funcs,
 				       formats, num_formats,
-				       type, NULL);
+				       NULL, type, NULL);
 
 	drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
 
drivers/gpu/drm/virtio/virtgpu_plane.c +1 -1
index adcdbd0abef6..71ba455af915 100644
@@ -298,7 +298,7 @@ struct drm_plane *virtio_gpu_plane_init(struct virtio_gpu_device *vgdev,
 	ret = drm_universal_plane_init(dev, plane, 1 << index,
 				       &virtio_gpu_plane_funcs,
 				       formats, nformats,
-				       type, NULL);
+				       NULL, type, NULL);
 	if (ret)
 		goto err_plane_init;
 
drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +2 -2
index 6391069498d6..b8a09807c5de 100644
@@ -428,7 +428,7 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 				       0, &vmw_ldu_plane_funcs,
 				       vmw_primary_plane_formats,
 				       ARRAY_SIZE(vmw_primary_plane_formats),
-				       DRM_PLANE_TYPE_PRIMARY, NULL);
+				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize primary plane");
 		goto err_free;
@@ -443,7 +443,7 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 			0, &vmw_ldu_cursor_funcs,
 			vmw_cursor_plane_formats,
 			ARRAY_SIZE(vmw_cursor_plane_formats),
-			DRM_PLANE_TYPE_CURSOR, NULL);
+			NULL, DRM_PLANE_TYPE_CURSOR, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize cursor plane");
 		drm_plane_cleanup(&ldu->base.primary);
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +2 -2
index 854403509216..d1552d3e0652 100644
@@ -624,7 +624,7 @@ static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
 				       0, &vmw_sou_plane_funcs,
 				       vmw_primary_plane_formats,
 				       ARRAY_SIZE(vmw_primary_plane_formats),
-				       DRM_PLANE_TYPE_PRIMARY, NULL);
+				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize primary plane");
 		goto err_free;
@@ -639,7 +639,7 @@ static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
 			0, &vmw_sou_cursor_funcs,
 			vmw_cursor_plane_formats,
 			ARRAY_SIZE(vmw_cursor_plane_formats),
-			DRM_PLANE_TYPE_CURSOR, NULL);
+			NULL, DRM_PLANE_TYPE_CURSOR, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize cursor plane");
 		drm_plane_cleanup(&sou->base.primary);
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +2 -2
index 48cb840e3b47..ca3afae2db1f 100644
@@ -1475,7 +1475,7 @@ static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
 				       0, &vmw_stdu_plane_funcs,
 				       vmw_primary_plane_formats,
 				       ARRAY_SIZE(vmw_primary_plane_formats),
-				       DRM_PLANE_TYPE_PRIMARY, NULL);
+				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize primary plane");
 		goto err_free;
@@ -1490,7 +1490,7 @@ static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
 			0, &vmw_stdu_cursor_funcs,
 			vmw_cursor_plane_formats,
 			ARRAY_SIZE(vmw_cursor_plane_formats),
-			DRM_PLANE_TYPE_CURSOR, NULL);
+			NULL, DRM_PLANE_TYPE_CURSOR, NULL);
 	if (ret) {
 		DRM_ERROR("Failed to initialize cursor plane");
 		drm_plane_cleanup(&stdu->base.primary);
drivers/gpu/drm/zte/zx_plane.c +1 -1
index 4a6252720c10..18e763493264 100644
@@ -540,7 +540,7 @@ int zx_plane_init(struct drm_device *drm, struct zx_plane *zplane,
 
 	ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
 				       &zx_plane_funcs, formats, format_count,
-				       type, NULL);
+				       NULL, type, NULL);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "failed to init universal plane: %d\n", ret);
 		return ret;
include/drm/drm_plane.h +21 -1
index 9ab3e7044812..9d2cc3b11ae7 100644
@@ -392,6 +392,22 @@ struct drm_plane_funcs {
 	 */
 	void (*atomic_print_state)(struct drm_printer *p,
 				   const struct drm_plane_state *state);
+
+	/**
+	 * @format_mod_supported:
+	 *
+	 * This optional hook is used for the DRM to determine if the given
+	 * format/modifier combination is valid for the plane. This allows the
+	 * DRM to generate the correct format bitmask (which formats apply to
+	 * which modifier).
+	 *
+	 * Returns:
+	 *
+	 * True if the given modifier is valid for that format on the plane.
+	 * False otherwise.
+	 */
+	bool (*format_mod_supported)(struct drm_plane *plane, uint32_t format,
+				     uint64_t modifier);
 };
 
 /**
@@ -487,6 +503,9 @@ struct drm_plane {
 	unsigned int format_count;
 	bool format_default;
 
+	uint64_t *modifiers;
+	unsigned int modifier_count;
+
 	struct drm_crtc *crtc;
 	struct drm_framebuffer *fb;
 
@@ -527,13 +546,14 @@ struct drm_plane {
 
 #define obj_to_plane(x) container_of(x, struct drm_plane, base)
 
-__printf(8, 9)
+__printf(9, 10)
 int drm_universal_plane_init(struct drm_device *dev,
 			     struct drm_plane *plane,
 			     uint32_t possible_crtcs,
 			     const struct drm_plane_funcs *funcs,
 			     const uint32_t *formats,
 			     unsigned int format_count,
+			     const uint64_t *format_modifiers,
 			     enum drm_plane_type type,
 			     const char *name, ...);
 int drm_plane_init(struct drm_device *dev,
include/drm/drm_simple_kms_helper.h +1 -0
index 2d36538e4a17..6d9adbb46293 100644
@@ -122,6 +122,7 @@ int drm_simple_display_pipe_init(struct drm_device *dev,
 			struct drm_simple_display_pipe *pipe,
 			const struct drm_simple_display_pipe_funcs *funcs,
 			const uint32_t *formats, unsigned int format_count,
+			const uint64_t *format_modifiers,
 			struct drm_connector *connector);
 
 #endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */
include/uapi/drm/drm_fourcc.h +11 -0
index ee5910944fac..b7e99e2d958a 100644
@@ -185,6 +185,8 @@ extern "C" {
 #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
 /* add more to the end as needed */
 
+#define DRM_FORMAT_RESERVED	      ((1ULL << 56) - 1)
+
 #define fourcc_mod_code(vendor, val) \
 	((((__u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | (val & 0x00ffffffffffffffULL))
 
@@ -197,6 +199,15 @@ extern "C" {
  */
 
 /*
+ * Invalid Modifier
+ *
+ * This modifier can be used as a sentinel to terminate the format modifiers
+ * list, or to initialize a variable with an invalid modifier. It might also be
+ * used to report an error back to userspace for certain APIs.
+ */
+#define DRM_FORMAT_MOD_INVALID	fourcc_mod_code(NONE, DRM_FORMAT_RESERVED)
+
+/*
  * Linear Layout
  *
  * Just plain linear layout. Note that this is different from no specifying any
Signature · 6 lines
2.13.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/6 drm: Create a format/modifier blob

In reply to Ben Widawsky

Updated blob layout (Rob, Daniel, Kristian, xerpi)

v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)

v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)

v4:
Use plane->modifier_count instead of recounting (Daniel)

v5:
Rename modifiers to modifiers_property (Ville) Use sizeof(__u32) instead to reflect UAPI nature (Ville) Make BUILD_BUG_ON for blob header size

---
 drivers/gpu/drm/drm_mode_config.c |  7 ++++
 drivers/gpu/drm/drm_plane.c       | 84 +++++++++++++++++++++++++++++++++++++++
 include/drm/drm_mode_config.h     |  6 +++
 include/uapi/drm/drm_mode.h       | 50 +++++++++++++++++++++++
 4 files changed, 147 insertions(+)
drivers/gpu/drm/drm_mode_config.c +7 -0
index d9862259a2a7..74f6ff5df656 100644
@@ -337,6 +337,13 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.gamma_lut_size_property = prop;
 
+	prop = drm_property_create(dev,
+				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
+				   "IN_FORMATS", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.modifiers_property = prop;
+
 	return 0;
 }
 
drivers/gpu/drm/drm_plane.c +84 -0

96 lines not on this page · raw message

include/drm/drm_mode_config.h +6 -0
index f0d3d3857ae2..5b379db1ea14 100644
@@ -758,6 +758,12 @@ struct drm_mode_config {
 	 */
 	bool allow_fb_modifiers;
 
+	/**
+	 * @modifiers: Plane property to list support modifier/format
+	 * combination.
+	 */
+	struct drm_property *modifiers_property;
+
 	/* cursor size */
 	uint32_t cursor_width, cursor_height;
 
include/uapi/drm/drm_mode.h +50 -0

56 lines not on this page · raw message

Signature · 6 lines
2.13.3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#5 lore raw

PATCH 5/6 drm/i915: Add format modifiers for Intel

In reply to Ben Widawsky

This was based on a patch originally by Kristian. It has been modified pretty heavily to use the new callbacks from the previous patch.

v2:
- Add LINEAR and Yf modifiers to list (Ville)
- Combine i8xx and i965 into one list of formats (Ville)
- Allow 1010102 formats for Y/Yf tiled (Ville)

v3:
- Handle cursor formats (Ville)
- Put handling for LINEAR in the mod_support functions (Ville)

v4:
- List each modifier explicitly in supported modifiers (Ville)
- Handle the CURSOR plane (Ville)

v5:
- Split out cursor and sprite handling (Ville)

v6:
- Actually use the sprite funcs (Emil)
- Use unreachable (Emil)

v7:
- Only allow Intel modifiers and LINEAR (Ben)

v8
- Fix spite assert introduced in v6 (Daniel)

v9
- Change vendor check logic to avoid magic 56 (Emil)
- Reorder skl_mod_support (Ville)
- make intel_plane_funcs static, could be done as of v5 (Ville)
- rename local variable intel_format_modifiers to modifiers (Ville)
- actually use sprite modifiers
- split out modifier/formats by platform (Ville)

Cc Ville Syrjälä <[email protected]>
Cc Kristian H. Kristensen <[email protected]>
---
 drivers/gpu/drm/i915/intel_display.c | 127 +++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |   1 -
 drivers/gpu/drm/i915/intel_sprite.c  | 141 ++++++++++++++++++++++++++++++++++-
 3 files changed, 259 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_display.c +122 -5
index 0381a1734396..40cb02c0ac2b 100644
@@ -67,6 +67,12 @@ static const uint32_t i965_primary_formats[] = {
 	DRM_FORMAT_XBGR2101010,
 };
 
+static const uint64_t i9xx_format_modifiers[] = {
+	I915_FORMAT_MOD_X_TILED,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 static const uint32_t skl_primary_formats[] = {
 	DRM_FORMAT_C8,
 	DRM_FORMAT_RGB565,
@@ -82,11 +88,24 @@ static const uint32_t skl_primary_formats[] = {
 	DRM_FORMAT_VYUY,
 };
 
+static const uint64_t skl_format_modifiers[] = {
+	I915_FORMAT_MOD_Yf_TILED,
+	I915_FORMAT_MOD_Y_TILED,
+	I915_FORMAT_MOD_X_TILED,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 /* Cursor formats */
 static const uint32_t intel_cursor_formats[] = {
 	DRM_FORMAT_ARGB8888,
 };
 
+static const uint64_t cursor_format_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 				struct intel_crtc_state *pipe_config);
 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
@@ -12843,7 +12862,98 @@ void intel_plane_destroy(struct drm_plane *plane)
 	kfree(to_intel_plane(plane));
 }
 
-const struct drm_plane_funcs intel_plane_funcs = {
+static bool i8xx_mod_supported(uint32_t format, uint64_t modifier)
+{
+	switch (format) {
+	case DRM_FORMAT_C8:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XRGB1555:
+	case DRM_FORMAT_XRGB8888:
+		return modifier == DRM_FORMAT_MOD_LINEAR ||
+			modifier == I915_FORMAT_MOD_X_TILED;
+	default:
+		return false;
+	}
+}
+
+static bool i965_mod_supported(uint32_t format, uint64_t modifier)
+{
+	switch (format) {
+	case DRM_FORMAT_C8:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_XBGR2101010:
+		return modifier == DRM_FORMAT_MOD_LINEAR ||
+			modifier == I915_FORMAT_MOD_X_TILED;
+	default:
+		return false;
+	}
+}
+
+static bool skl_mod_supported(uint32_t format, uint64_t modifier)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_VYUY:
+		if (modifier == I915_FORMAT_MOD_Yf_TILED)
+			return true;
+		/* fall through */
+	case DRM_FORMAT_C8:
+		if (modifier == DRM_FORMAT_MOD_LINEAR ||
+		    modifier == I915_FORMAT_MOD_X_TILED ||
+		    modifier == I915_FORMAT_MOD_Y_TILED)
+			return true;
+		/* fall through */
+	default:
+		return false;
+	}
+}
+
+static bool intel_primary_plane_format_mod_supported(struct drm_plane *plane,
+						     uint32_t format,
+						     uint64_t modifier)
+{
+	struct drm_i915_private *dev_priv = to_i915(plane->dev);
+
+	if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
+		return false;
+
+	if (!(modifier & DRM_FORMAT_MOD_VENDOR_INTEL) &&
+	    modifier != DRM_FORMAT_MOD_LINEAR)
+		return false;
+
+	if (INTEL_GEN(dev_priv) >= 9)
+		return skl_mod_supported(format, modifier);
+	else if (INTEL_GEN(dev_priv) >= 4)
+		return i965_mod_supported(format, modifier);
+	else
+		return i8xx_mod_supported(format, modifier);
+
+	unreachable();
+}
+
+static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
+						    uint32_t format,
+						    uint64_t modifier)
+{
+	if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
+		return false;
+
+	return modifier == DRM_FORMAT_MOD_LINEAR && format == DRM_FORMAT_ARGB8888;
+}
+
+static struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = intel_plane_destroy,
@@ -12852,6 +12962,7 @@ const struct drm_plane_funcs intel_plane_funcs = {
 	.atomic_set_property = intel_plane_atomic_set_property,
 	.atomic_duplicate_state = intel_plane_duplicate_state,
 	.atomic_destroy_state = intel_plane_destroy_state,
+	.format_mod_supported = intel_primary_plane_format_mod_supported,
 };
 
 static int
@@ -12986,6 +13097,7 @@ static const struct drm_plane_funcs intel_cursor_plane_funcs = {
 	.atomic_set_property = intel_plane_atomic_set_property,
 	.atomic_duplicate_state = intel_plane_duplicate_state,
 	.atomic_destroy_state = intel_plane_destroy_state,
+	.format_mod_supported = intel_cursor_plane_format_mod_supported,
 };
 
 static struct intel_plane *
@@ -12996,6 +13108,7 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	const uint32_t *intel_primary_formats;
 	unsigned int supported_rotations;
 	unsigned int num_formats;
+	const uint64_t *modifiers;
 	int ret;
 
 	primary = kzalloc(sizeof(*primary), GFP_KERNEL);
@@ -13034,18 +13147,21 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	if (INTEL_GEN(dev_priv) >= 9) {
 		intel_primary_formats = skl_primary_formats;
 		num_formats = ARRAY_SIZE(skl_primary_formats);
+		modifiers = skl_format_modifiers;
 
 		primary->update_plane = skylake_update_primary_plane;
 		primary->disable_plane = skylake_disable_primary_plane;
 	} else if (INTEL_GEN(dev_priv) >= 4) {
 		intel_primary_formats = i965_primary_formats;
 		num_formats = ARRAY_SIZE(i965_primary_formats);
+		modifiers = i9xx_format_modifiers;
 
 		primary->update_plane = i9xx_update_primary_plane;
 		primary->disable_plane = i9xx_disable_primary_plane;
 	} else {
 		intel_primary_formats = i8xx_primary_formats;
 		num_formats = ARRAY_SIZE(i8xx_primary_formats);
+		modifiers = i9xx_format_modifiers;
 
 		primary->update_plane = i9xx_update_primary_plane;
 		primary->disable_plane = i9xx_disable_primary_plane;
@@ -13055,21 +13171,21 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
-					       NULL,
+					       modifiers,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "plane 1%c", pipe_name(pipe));
 	else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
-					       NULL,
+					       modifiers,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "primary %c", pipe_name(pipe));
 	else
 		ret = drm_universal_plane_init(&dev_priv->drm, &primary->base,
 					       0, &intel_plane_funcs,
 					       intel_primary_formats, num_formats,
-					       NULL,
+					       modifiers,
 					       DRM_PLANE_TYPE_PRIMARY,
 					       "plane %c", plane_name(primary->plane));
 	if (ret)
@@ -13155,7 +13271,8 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv,
 				       0, &intel_cursor_plane_funcs,
 				       intel_cursor_formats,
 				       ARRAY_SIZE(intel_cursor_formats),
-				       NULL, DRM_PLANE_TYPE_CURSOR,
+				       cursor_format_modifiers,
+				       DRM_PLANE_TYPE_CURSOR,
 				       "cursor %c", pipe_name(pipe));
 	if (ret)
 		goto fail;
drivers/gpu/drm/i915/intel_drv.h +0 -1
index ee0daecff713..5696099afe19 100644
@@ -1317,7 +1317,6 @@ int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
 			   const char *name, u32 reg);
 void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv);
 void lpt_disable_iclkip(struct drm_i915_private *dev_priv);
-extern const struct drm_plane_funcs intel_plane_funcs;
 void intel_init_display_hooks(struct drm_i915_private *dev_priv);
 unsigned int intel_fb_xy_to_linear(int x, int y,
 				   const struct intel_plane_state *state,
drivers/gpu/drm/i915/intel_sprite.c +137 -4

200 lines not on this page · raw message

Signature · 6 lines
2.13.3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

Re: [PATCH 5/6] drm/i915: Add format modifiers for Intel

Hi Ben,

drivers/gpu/drm/i915/intel_display.c void intel_plane_destroy(struct drm_plane *plane) · line 12934

Quoted 12 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +12 -0
+static bool intel_primary_plane_format_mod_supported(struct drm_plane *plane,
+                                                    uint32_t format,
+                                                    uint64_t modifier)
+{
+       struct drm_i915_private *dev_priv = to_i915(plane->dev);
+
+       if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
+               return false;
+
+       if (!(modifier & DRM_FORMAT_MOD_VENDOR_INTEL) &&
+           modifier != DRM_FORMAT_MOD_LINEAR)
+               return false;

The vendor ID isn't shifted yet, so this comparison is wrong. Even if it was shifted, they're sequential rather than bitmask, so NV/QCOM/BROADCOM all match (vendor & INTEL). To fix both of these:
- if (!(modifier & DRM_FORMAT_MOD_VENDOR_INTEL) &&
- modifier != DRM_FORMAT_MOD_LINEAR)
+ if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_INTEL &&
+ modifier != DRM_FORMAT_MOD_LINEAR)

The practical effect is that this knocked out MOD_Y_TILED and MOD_Y_TILED_CCS from the list, since they're the only two Intel modifiers without the low bit set.

Cheers,
Daniel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#7 lore raw

PATCH 6/6 drm/i915: Add support for CCS modifiers

In reply to Ben Widawsky

v2:
Support sprite plane.
Support pipe C/D limitation on GEN9.

v3:
Rename structure (Ville)
Handle GLK (Ville)

This requires rebase on the correct Ville patches

Cc Daniel Stone <[email protected]>
Cc Kristian Høgsberg <[email protected]>
---
 drivers/gpu/drm/i915/intel_display.c | 30 +++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_sprite.c  | 25 ++++++++++++++++++++++++-
 2 files changed, 51 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_display.c +27 -3
index 40cb02c0ac2b..fc990189c97d 100644
@@ -88,7 +88,17 @@ static const uint32_t skl_primary_formats[] = {
 	DRM_FORMAT_VYUY,
 };
 
-static const uint64_t skl_format_modifiers[] = {
+static const uint64_t skl_format_modifiers_noccs[] = {
+	I915_FORMAT_MOD_Yf_TILED,
+	I915_FORMAT_MOD_Y_TILED,
+	I915_FORMAT_MOD_X_TILED,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
+static const uint64_t skl_format_modifiers_ccs[] = {
+	I915_FORMAT_MOD_Yf_TILED_CCS,
+	I915_FORMAT_MOD_Y_TILED_CCS,
 	I915_FORMAT_MOD_Yf_TILED,
 	I915_FORMAT_MOD_Y_TILED,
 	I915_FORMAT_MOD_X_TILED,
@@ -12899,6 +12909,10 @@ static bool skl_mod_supported(uint32_t format, uint64_t modifier)
 	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ARGB8888:
 	case DRM_FORMAT_ABGR8888:
+		if (modifier == I915_FORMAT_MOD_Yf_TILED_CCS ||
+		    modifier == I915_FORMAT_MOD_Y_TILED_CCS)
+		return true;
+		/* fall through */
 	case DRM_FORMAT_RGB565:
 	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_XBGR2101010:
@@ -13144,10 +13158,20 @@ intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
 	primary->check_plane = intel_check_primary_plane;
 
-	if (INTEL_GEN(dev_priv) >= 9) {
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
+		intel_primary_formats = skl_primary_formats;
+		num_formats = ARRAY_SIZE(skl_primary_formats);
+		modifiers = skl_format_modifiers_ccs;
+
+		primary->update_plane = skylake_update_primary_plane;
+		primary->disable_plane = skylake_disable_primary_plane;
+	} else if (INTEL_GEN(dev_priv) >= 9) {
 		intel_primary_formats = skl_primary_formats;
 		num_formats = ARRAY_SIZE(skl_primary_formats);
-		modifiers = skl_format_modifiers;
+		if (pipe >= PIPE_C)
+			modifiers = skl_format_modifiers_ccs;
+		else
+			modifiers = skl_format_modifiers_noccs;
 
 		primary->update_plane = skylake_update_primary_plane;
 		primary->disable_plane = skylake_disable_primary_plane;
drivers/gpu/drm/i915/intel_sprite.c +24 -1
index 05a15063ee97..97d29cc061ad 100644
@@ -1079,7 +1079,17 @@ static uint32_t skl_plane_formats[] = {
 	DRM_FORMAT_VYUY,
 };
 
+static const uint64_t skl_plane_format_modifiers_noccs[] = {
+	I915_FORMAT_MOD_Yf_TILED,
+	I915_FORMAT_MOD_Y_TILED,
+	I915_FORMAT_MOD_X_TILED,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 static const uint64_t skl_plane_format_modifiers[] = {
+	I915_FORMAT_MOD_Yf_TILED_CCS,
+	I915_FORMAT_MOD_Y_TILED_CCS,
 	I915_FORMAT_MOD_Yf_TILED,
 	I915_FORMAT_MOD_Y_TILED,
 	I915_FORMAT_MOD_X_TILED,
@@ -1224,7 +1234,7 @@ intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 	}
 	intel_plane->base.state = &state->base;
 
-	if (INTEL_GEN(dev_priv) >= 9) {
+	if (INTEL_GEN(dev_priv) >= 10) {
 		intel_plane->can_scale = true;
 		state->scaler_id = -1;
 
@@ -1234,6 +1244,19 @@ intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 		plane_formats = skl_plane_formats;
 		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
 		modifiers = skl_plane_format_modifiers;
+	} else if (INTEL_GEN(dev_priv) >= 9) {
+		intel_plane->can_scale = true;
+		state->scaler_id = -1;
+
+		intel_plane->update_plane = skl_update_plane;
+		intel_plane->disable_plane = skl_disable_plane;
+
+		plane_formats = skl_plane_formats;
+		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		if (pipe >= PIPE_C)
+			modifiers = skl_plane_format_modifiers_noccs;
+		else
+			modifiers = skl_plane_format_modifiers;
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		intel_plane->can_scale = false;
 		intel_plane->max_downscale = 1;
Signature · 6 lines
2.13.3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#8 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Hi Ben,

drivers/gpu/drm/i915/intel_display.c intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) · line 13174

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;

Shouldn't that be (pipe < PIPE_C)?

Cheers,
Daniel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#9 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 12 lines · Daniel Stone

Hi Ben,

drivers/gpu/drm/i915/intel_display.c intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) · line 13174

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;
Quoted 4 lines

Shouldn't that be (pipe < PIPE_C)?

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.
_______________________________________________
Intel-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 13 lines · Ben Widawsky
Quoted 12 lines · Daniel Stone

Hi Ben,

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;
Quoted 6 lines
Quoted 4 lines

Shouldn't that be (pipe < PIPE_C)?

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

Re: [Intel-gfx] [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 16 lines · Daniel Vetter
Quoted 15 lines · Ben Widawsky
Quoted 14 lines · Daniel Stone

Hi Ben,

drivers/gpu/drm/i915/intel_display.c intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) · line 13174

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;

Shouldn't that be (pipe < PIPE_C)?

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

I don't know whether or not IGT should have caught this, but it wouldn't have because I had been sending these without Ville's patches, so my patches alone don't even build (since his patches defined the modifiers).

Quoted 4 lines
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#12 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 22 lines · Ben Widawsky
Quoted 21 lines · Daniel Vetter
Quoted 19 lines · Ben Widawsky
Quoted 12 lines · Daniel Stone

Hi Ben,

drivers/gpu/drm/i915/intel_display.c intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) · line 13174

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;
Quoted 4 lines

Shouldn't that be (pipe < PIPE_C)?

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Quoted 7 lines
Quoted 3 lines

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

I don't know whether or not IGT should have caught this, but it wouldn't have because I had been sending these without Ville's patches, so my patches alone don't even build (since his patches defined the modifiers).

You can run igt testcases locally. I expect you to do that, at least for the stuff you're touching.

Does this mean there's no igts for this at all?
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#13 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 31 lines · Daniel Vetter
Quoted 22 lines · Ben Widawsky
Quoted 21 lines · Daniel Vetter
Quoted 19 lines · Ben Widawsky
Quoted 12 lines · Daniel Stone

Hi Ben,

drivers/gpu/drm/i915/intel_display.c intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe) · line 13174

Quoted 8 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_display.c +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;
Quoted 4 lines

Shouldn't that be (pipe < PIPE_C)?

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Quoted 7 lines
Quoted 3 lines

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

I don't know whether or not IGT should have caught this, but it wouldn't have because I had been sending these without Ville's patches, so my patches alone don't even build (since his patches defined the modifiers).

Quoted 5 lines

You can run igt testcases locally. I expect you to do that, at least for the stuff you're touching.

Does this mean there's no igts for this at all?
-Daniel

I haven't been running IGT locally, so I don't know if they touch this path. We've done all testing so far with kmscube, X, and weston; then measure the overall bandwidth. In this case, I'd stop testing these since Jason/Daniel took over my other patches. I don't even know how to locally make sure I get a display on pipe C.

You could easily make an IGT make sure that you get back the right list of modifiers for a given pipe on a given GEN. Probably should do one.

Quoted 4 lines
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#14 lore raw

Re: [Intel-gfx] [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 51 lines · Ben Widawsky
Quoted 36 lines · Daniel Vetter
Quoted 27 lines · Ben Widawsky
Quoted 16 lines · Daniel Vetter
Quoted 15 lines · Ben Widawsky
Quoted 14 lines · Daniel Stone

Hi Ben,

Review

Quoted 8 lines · Ben Widawsky
(quoted diff) +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;

Shouldn't that be (pipe < PIPE_C)?

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

Quoted 5 lines

I don't know whether or not IGT should have caught this, but it wouldn't have
because I had been sending these without Ville's patches, so my patches alone
don't even build (since his patches defined the modifiers).

Quoted 5 lines

You can run igt testcases locally. I expect you to do that, at least for the stuff you're touching.

Does this mean there's no igts for this at all?
-Daniel

I haven't been running IGT locally, so I don't know if they touch this path. We've done all testing so far with kmscube, X, and weston; then measure the overall bandwidth. In this case, I'd stop testing these since Jason/Daniel took
over my other patches. I don't even know how to locally make sure I get a display on pipe C.

Quoted 2 lines

You could easily make an IGT make sure that you get back the right list of modifiers for a given pipe on a given GEN. Probably should do one.

That's not a terribly interesting testcase (we have none of this kind I think). But I thought there was a CCS igt that created some simple compressed buffers and tried to display them, and then checked it all looked good using crcs, i.e. an actual functional testcase, and that should have caught the mislisten on pipe C (if it bothered to test all planes that expose the CCS modifier). Iirc Ville had that. We do need that for merging the kernel side.

Thanks, Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#15 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

Quoted 63 lines · Daniel Vetter
Quoted 51 lines · Ben Widawsky
Quoted 36 lines · Daniel Vetter
Quoted 27 lines · Ben Widawsky
Quoted 16 lines · Daniel Vetter
Quoted 15 lines · Ben Widawsky
Quoted 14 lines · Daniel Stone

Hi Ben,

Review

Quoted 8 lines · Ben Widawsky
(quoted diff) +5 -1
+       } else if (INTEL_GEN(dev_priv) >= 9) {
                intel_primary_formats = skl_primary_formats;
                num_formats = ARRAY_SIZE(skl_primary_formats);
-               modifiers = skl_format_modifiers;
+               if (pipe >= PIPE_C)
+                       modifiers = skl_format_modifiers_ccs;
+               else
+                       modifiers = skl_format_modifiers_noccs;

Shouldn't that be (pipe < PIPE_C)?

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Cheers,
Daniel

Yep. It was wrong in v7 too :/. I have it fixed locally.

Shouldn't the igt catch this, or does it not try to exercise all the plane/crtc combos there are?
-Daniel

Quoted 5 lines

I don't know whether or not IGT should have caught this, but it wouldn't have
because I had been sending these without Ville's patches, so my patches alone
don't even build (since his patches defined the modifiers).

Quoted 5 lines

You can run igt testcases locally. I expect you to do that, at least for the stuff you're touching.

Does this mean there's no igts for this at all?
-Daniel

I haven't been running IGT locally, so I don't know if they touch this path. We've done all testing so far with kmscube, X, and weston; then measure the overall bandwidth. In this case, I'd stop testing these since Jason/Daniel took
over my other patches. I don't even know how to locally make sure I get a display on pipe C.

Quoted 2 lines

You could easily make an IGT make sure that you get back the right list of modifiers for a given pipe on a given GEN. Probably should do one.

That's not a terribly interesting testcase (we have none of this kind I think). But I thought there was a CCS igt that created some simple compressed buffers and tried to display them, and then checked it all looked good using crcs, i.e. an actual functional testcase, and that should have caught the mislisten on pipe C (if it bothered to test all planes that expose the CCS modifier). Iirc Ville had that. We do need that for merging the kernel side.

Quoted 1 line

Thanks, Daniel

Yeah, we did have that already - just nothing for blobifiers specifically. It sounds like igt_ccs is broken at the moment.

Quoted 4 lines
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#16 lore raw

Re: [PATCH 6/6] drm/i915: Add support for CCS modifiers

In reply to Ben Widawsky

Hi,

Quoted 4 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_sprite.c +4 -0
+static const uint64_t skl_plane_format_modifiers_noccs[] = {
+       I915_FORMAT_MOD_Yf_TILED,
+       I915_FORMAT_MOD_Y_TILED,
+       I915_FORMAT_MOD_X_TILED,

drivers/gpu/drm/i915/intel_sprite.c static uint32_t skl_plane_formats[] = { · line 1095

Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +6 -0
+       DRM_FORMAT_MOD_LINEAR,
+       DRM_FORMAT_MOD_INVALID
+};
+
 static const uint64_t skl_plane_format_modifiers[] = {
+       I915_FORMAT_MOD_Yf_TILED_CCS,
+       I915_FORMAT_MOD_Y_TILED_CCS,
        I915_FORMAT_MOD_Yf_TILED,
        I915_FORMAT_MOD_Y_TILED,
        I915_FORMAT_MOD_X_TILED,

This is also missing the relevant hunk in format_mod_supported.

Quoted 7 lines
drivers/gpu/drm/i915/intel_sprite.c +3 -0
@@ -1234,6 +1244,19 @@ intel_sprite_plane_create(struct drm_i915_private *dev_priv,
                plane_formats = skl_plane_formats;
                num_plane_formats = ARRAY_SIZE(skl_plane_formats);
                modifiers = skl_plane_format_modifiers;
+       } else if (INTEL_GEN(dev_priv) >= 9) {
+               intel_plane->can_scale = true;
+               state->scaler_id = -1;

drivers/gpu/drm/i915/intel_sprite.c intel_sprite_plane_create(struct drm_i915_private *dev_priv, · line 1259

Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +10 -0
+
+               intel_plane->update_plane = skl_update_plane;
+               intel_plane->disable_plane = skl_disable_plane;
+
+               plane_formats = skl_plane_formats;
+               num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+               if (pipe >= PIPE_C)
+                       modifiers = skl_plane_format_modifiers_noccs;
+               else
+                       modifiers = skl_plane_format_modifiers;

This explains the inconsistency.

Cheers,
Daniel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#17 lore raw

✗ Fi.CI.BAT: failure for series starting with [1/6] drm/i915: Implement .get_format_info() hook for CCS

In reply to Ben Widawsky
== Series Details ==

== Series Details ==

Series: series starting with [1/6] drm/i915: Implement .get_format_info() hook for CCS
URL : https://patchwork.freedesktop.org/series/27949/
State : failure

== Summary ==

Series 27949v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/27949/revisions/1/mbox/

Test kms_cursor_legacy:

        Subgroup basic-busy-flip-before-cursor-legacy:
                pass       -> FAIL       (fi-snb-2600) fdo#100215
Test kms_frontbuffer_tracking:
        Subgroup basic:
                pass       -> FAIL       (fi-glk-2a)
Test kms_pipe_crc_basic:
        Subgroup hang-read-crc-pipe-a:
                dmesg-warn -> PASS       (fi-pnv-d510) fdo#101597
        Subgroup suspend-read-crc-pipe-b:
                pass       -> DMESG-WARN (fi-byt-j1900) fdo#101705

fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fdo#101597 https://bugs.freedesktop.org/show_bug.cgi?id=101597
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705

fi-bdw-5557u     total:280  pass:269  dwarn:0   dfail:0   fail:0   skip:11  time:456s
fi-bdw-gvtdvm    total:280  pass:266  dwarn:0   dfail:0   fail:0   skip:14  time:434s
fi-blb-e6850     total:280  pass:225  dwarn:1   dfail:0   fail:0   skip:54  time:358s
fi-bsw-n3050     total:280  pass:244  dwarn:0   dfail:0   fail:0   skip:36  time:536s
fi-bxt-j4205     total:280  pass:261  dwarn:0   dfail:0   fail:0   skip:19  time:512s
fi-byt-j1900     total:280  pass:255  dwarn:1   dfail:0   fail:0   skip:24  time:497s
fi-byt-n2820     total:280  pass:251  dwarn:1   dfail:0   fail:0   skip:28  time:487s
fi-glk-2a        total:280  pass:260  dwarn:0   dfail:0   fail:1   skip:19  time:593s
fi-hsw-4770      total:280  pass:264  dwarn:0   dfail:0   fail:0   skip:16  time:438s
fi-hsw-4770r     total:280  pass:264  dwarn:0   dfail:0   fail:0   skip:16  time:417s
fi-ilk-650       total:280  pass:230  dwarn:0   dfail:0   fail:0   skip:50  time:416s
fi-ivb-3520m     total:280  pass:262  dwarn:0   dfail:0   fail:0   skip:18  time:501s
fi-ivb-3770      total:280  pass:262  dwarn:0   dfail:0   fail:0   skip:18  time:472s
fi-kbl-7500u     total:280  pass:262  dwarn:0   dfail:0   fail:0   skip:18  time:469s
fi-kbl-7560u     total:280  pass:270  dwarn:0   dfail:0   fail:0   skip:10  time:574s
fi-kbl-r         total:280  pass:262  dwarn:0   dfail:0   fail:0   skip:18  time:595s
fi-pnv-d510      total:280  pass:223  dwarn:2   dfail:0   fail:0   skip:55  time:572s
fi-skl-6260u     total:280  pass:270  dwarn:0   dfail:0   fail:0   skip:10  time:459s
fi-skl-6700hq    total:280  pass:263  dwarn:0   dfail:0   fail:0   skip:17  time:587s
fi-skl-6700k     total:280  pass:262  dwarn:0   dfail:0   fail:0   skip:18  time:471s
fi-skl-6770hq    total:280  pass:270  dwarn:0   dfail:0   fail:0   skip:10  time:478s
fi-skl-gvtdvm    total:280  pass:267  dwarn:0   dfail:0   fail:0   skip:13  time:438s
fi-skl-x1585l    total:280  pass:270  dwarn:0   dfail:0   fail:0   skip:10  time:494s
fi-snb-2520m     total:280  pass:252  dwarn:0   dfail:0   fail:0   skip:28  time:543s
fi-snb-2600      total:280  pass:250  dwarn:0   dfail:0   fail:1   skip:29  time:410s

a74cf664628ae105b471052d6cefb2ef23f89aae drm-tip: 2017y-07m-26d-16h-40m-02s UTC integration manifest 7e4c3147c3d9 drm/i915: Add support for CCS modifiers
1696112cd252 drm/i915: Add format modifiers for Intel
a79499681ae3 drm: Create a format/modifier blob
d617c955eab1 drm: Plumb modifiers through plane init
8a83b9cba9e9 drm/i915: Add render decompression support
6635d22090bb drm/i915: Implement .get_format_info() hook for CCS

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5284/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#18 lore raw
In reply to Ben Widawsky

Hi Ben,

Quoted 2 lines · Ben Widawsky

v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout

This went missing. Vidya's patch has it though.

drivers/gpu/drm/i915/intel_display.c static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier) · line 2435

Quoted 5 lines
drivers/gpu/drm/i915/intel_display.c +5 -0
+static const struct drm_format_info ccs_formats[] = {
+       { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+       { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+       { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },
+       { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 16, .vsub = 8, },

Mind you, this is backwards from Vidya's patch, in which CCS is described as 8x16 subsampled rather than 16x8. I think yours is correct though.

Cheers,
Daniel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx