VRF and PBR question
Hi all.
I've got network:
+------+ +----------------+
| isp1 |<------>|eth0 |
+------+ | | +--------------------+
| eth2 |<----->| LAN:10.10.2.0/24 |
+------+ | | +--------------------+
| isp2 |<------>|eth1 |
+------+ +----------------+Interfaces eth0,eth1 and eth2 are enslaved in VRF:
# ip link add vrf0 type vrf table 10 # ip link set dev vfr0 up # ip link set dev eth0 master vrf0 # ip link set dev eth1 master vrf0 # ip link set dev eth2 master vrf0
I need to route some clients via ips1 and others via isp2. So and I got two rules:
# ip rule add from 10.10.2.2 table isp1 # ip rule add from 10.10.2.3 table isp2
But I cannot add route to tables isp1 and isp2 because there are no link-local routes in main table, they are inside vrf:
# ip r show vrf vrf0: 10.10.0.0/24 dev eth0 ....
So when I tries to add route I got error:
# ip r add 10.100.0.0/24 via 10.10.0.2 table isp1 RTNETLINK answers: Network in unreachable.
How can I use source routing inside VRF?