ARM: dts: am57xx-beagle-x15: Add support for rev C
PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add support for rev C
Latest update to the BeagleBoard-X15 platform (revision C). This board contains a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when running at 1000 Mbps speeds.
This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]
Rev C is now in full production and boards are available for end users.
https://beagleboard.org/x15
https://github.com/beagleboard/beagleboard-x15/
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -651,6 +651,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ + am57xx-beagle-x15-revc.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +24 -0
@@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev C"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&ldo1_reg>; +};
Signature · 1 line
2.14.1
PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add support for rev C
Quoted 41 lines · Robert Nelson
Latest update to the BeagleBoard-X15 platform (revision C). This board contains a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when running at 1000 Mbps speeds.
This board can be indentified by the [C.00] after [
BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]Rev C is now in full production and boards are available for end users.
https://beagleboard.org/x15
https://github.com/beagleboard/beagleboard-x15/Signed-off-by Robert Nelson <[email protected]>CC Tony Lindgren <[email protected]>CC Nishanth Menon <[email protected]>CC Jason Kridner <[email protected]>CC Drew Fustini <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtsarch/arm/boot/dts/Makefile +1
-0@@ -651,6 +651,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ + am57xx-beagle-x15-revc.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +0
-0
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts line 2
Quoted 2 lines
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +2
-0@@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
^^2017 :)
Rest of the patch looks good to me.
Thanks and regards,
Lokesh
Quoted 23 lines
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +22
-0+ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev C"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&ldo1_reg>; +};
PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add support for rev C
Quoted 48 lines · Lokesh Vutla
Quoted 41 lines · Robert Nelson
Latest update to the BeagleBoard-X15 platform (revision C). This board contains a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when running at 1000 Mbps speeds.
This board can be indentified by the [C.00] after [
BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]Rev C is now in full production and boards are available for end users.
https://beagleboard.org/x15
https://github.com/beagleboard/beagleboard-x15/Signed-off-by Robert Nelson <[email protected]>CC Tony Lindgren <[email protected]>CC Nishanth Menon <[email protected]>CC Jason Kridner <[email protected]>CC Drew Fustini <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtsarch/arm/boot/dts/Makefile +1
-0@@ -651,6 +651,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ + am57xx-beagle-x15-revc.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +0
-0arch/arm/boot/dts/am57xx-beagle-x15-revc.dts line 2
Quoted 2 lines
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts new file +2
-0@@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/^^2017 :)
Quoted 6 lines
Rest of the patch looks good to me.
Reviewed-by Lokesh Vutla <[email protected]>Thanks and regards,
Lokesh
and this is going to conflict with:
[v2,04/10] ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
https://patchwork.kernel.org/patch/9903875/
i'll wait for Tony to pick up Kishon's before i re-submit..
Regards,
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
PATCH 1/1 ARM: dts: am57xx-beagle-x15: Add support for rev C
Quoted 7 lines · Robert Nelson
and this is going to conflict with:
[v2,04/10] ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
https://patchwork.kernel.org/patch/9903875/
i'll wait for Tony to pick up Kishon's before i re-submit..
OK Kishon's patches are now all applied and merged into my for-next branch I just pushed out. Can you please update and test against that and repost?
The commit to use as base is commit 271df663be9e ("Merge branch 'omap-for-v4.14/dt-v3' into for-next") as that has -rc4 merged in that has commit c5b3955828ba ("ARM: OMAP4: Fix legacy code clean-up regression") while omap-for-v4.14/dt-v3 is missing that for testing.
Regards,
Tony