Skip to contentSkip to conversation

Linux 4.12.8

DISCUSSION Greg KH 1 participant 2 messages Aug 16, 2017 Stable branch

lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

I'm announcing the release of the 4.12.8 kernel.

All users of the 4.12 kernel series must upgrade.

The updated 4.12.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.12.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Makefile                                         |    2 
 arch/mips/dec/int-handler.S                      |   34 --
 arch/mips/include/asm/cache.h                    |    2 
 arch/mips/include/asm/octeon/cvmx-l2c-defs.h     |   37 ++
 arch/mips/include/asm/octeon/cvmx-l2d-defs.h     |   60 +++
 arch/mips/include/asm/octeon/cvmx.h              |    1 
 arch/powerpc/kernel/setup-common.c               |    4 
 arch/xtensa/kernel/xtensa_ksyms.c                |    2 
 arch/xtensa/mm/cache.c                           |   16 
 block/blk-mq.c                                   |    4 
 drivers/base/firmware_class.c                    |   49 ++
 drivers/gpu/drm/bridge/tc358767.c                |    2 
 drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c     |    4 
 drivers/gpu/drm/i915/intel_color.c               |    1 
 drivers/i2c/busses/i2c-designware-platdrv.c      |    3 
 drivers/iio/accel/bmc150-accel-core.c            |    9 
 drivers/iio/accel/st_accel_core.c                |   32 +
 drivers/iio/adc/aspeed_adc.c                     |   26 +
 drivers/iio/adc/axp288_adc.c                     |   32 +
 drivers/iio/adc/vf610_adc.c                      |    2 
 drivers/iio/common/st_sensors/st_sensors_core.c  |   29 +
 drivers/iio/light/tsl2563.c                      |    2 
 drivers/iio/pressure/st_pressure_core.c          |    2 
 drivers/mmc/core/mmc.c                           |    2 
 drivers/mtd/nand/atmel/pmecc.c                   |   21 -
 drivers/mtd/nand/nand_base.c                     |   12 
 drivers/mtd/nand/nand_timings.c                  |    6 
 drivers/pci/pci.c                                |  165 ++++++---
 drivers/pinctrl/intel/pinctrl-cherryview.c       |    7 
 drivers/pinctrl/intel/pinctrl-merrifield.c       |    6 
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c       |    1 
 drivers/pinctrl/meson/pinctrl-meson-gxl.c        |    1 
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c      |    2 
 drivers/pinctrl/samsung/pinctrl-exynos.c         |    4 
 drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c        |    1 
 drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c |  364 +++++++++++----------
 drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c |  383 +++++++++++------------
 drivers/staging/comedi/comedi_fops.c             |    3 
 drivers/staging/iio/resolver/ad2s1210.c          |    2 
 drivers/target/iscsi/iscsi_target.c              |    2 
 drivers/target/iscsi/iscsi_target_login.c        |    7 
 drivers/target/target_core_tpg.c                 |    4 
 drivers/target/target_core_transport.c           |    4 
 drivers/usb/core/hcd.c                           |    4 
 drivers/usb/core/hub.c                           |   10 
 drivers/usb/core/quirks.c                        |    4 
 drivers/usb/gadget/udc/renesas_usb3.c            |   21 -
 drivers/usb/host/pci-quirks.c                    |   37 +-
 drivers/usb/host/pci-quirks.h                    |    1 
 drivers/usb/host/xhci-pci.c                      |    7 
 drivers/usb/musb/musb_host.c                     |    1 
 drivers/usb/renesas_usbhs/rcar3.c                |    9 
 drivers/usb/serial/cp210x.c                      |    1 
 drivers/usb/serial/option.c                      |    2 
 drivers/usb/serial/pl2303.c                      |    2 
 drivers/usb/serial/pl2303.h                      |    1 
 drivers/usb/storage/unusual_uas.h                |    4 
 drivers/usb/storage/usb.c                        |   18 -
 fs/fuse/file.c                                   |    2 
 fs/nfs/Kconfig                                   |    1 
 fs/nfs/flexfilelayout/flexfilelayoutdev.c        |    1 
 fs/xfs/xfs_log_cil.c                             |    1 
 include/linux/iio/common/st_sensors.h            |    7 
 include/linux/mtd/nand.h                         |    6 
 include/linux/pci.h                              |    1 
 include/linux/platform_data/st_sensors_pdata.h   |    2 
 include/target/iscsi/iscsi_target_core.h         |    1 
 kernel/futex.c                                   |    5 
 mm/page_alloc.c                                  |    2 
 mm/shmem.c                                       |   12 
 70 files changed, 950 insertions(+), 565 deletions(-)

Akinobu Mita (1):
iio: light: tsl2563: use correct event code

Alan Stern (2):
usb-storage: fix deadlock involving host lock and scsi_done
USB: Check for dropped connection before switching to full speed

Alan Swanson (1):
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069

Andy Shevchenko (2):
pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk
pinctrl: intel: merrifield: Correct UART pin lists

Arnd Bergmann (1):
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read

Bart Van Assche (1):
block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time

Bin Liu (2):
usb: musb: fix tx fifo flush handling again
usb: core: unlink urbs from the tail of the endpoint's urb_list

Boris Brezillon (3):
mtd: nand: atmel: Fix DT backward compatibility in pmecc.c
mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow

Christoph Hellwig (3):
PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()
PCI: Remove __pci_dev_reset() and pci_dev_reset() pnfs/blocklayout: require 64-bit sector_t

Cong Wang (1):
mm: fix list corruptions on shmem shrinklist

Greg Kroah-Hartman (2):
USB: serial: pl2303: add new ATEN device id
Linux 4.12.8

Gregory CLEMENT (1):
pinctrl: armada-37xx: Fix number of pin in south bridge

Haibo Chen (1):
mmc: mmc: correct the logic for setting HS400ES signal voltage

Hans de Goede (3):
i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"

Hector Martin (1):
USB: serial: option: add D-Link DWM-222 device ID

Ian Abbott (1):
staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING

Icenowy Zheng (1):
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver

Jan Kara (1):
xfs: Fix leak of discard bio

Jonathan Toppins (1):
mm: ratelimit PFNs busy info message

Kai-Heng Feng (1):
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter

Lorenzo Bianconi (2):
iio: accel: st_accel: add SPI-3wire support
iio: pressure: st_pressure_core: disable multiread by default for LPS22HB

Lucas Stach (1):
drm/bridge: tc358767: fix probe without attached output node

Luis R. Rodriguez (3):
firmware: fix batched requests - wake all waiters
firmware: fix batched requests - send wake up on failure on direct lookups
firmware: avoid invalid fallback aborts by using killable wait

Maarten Lankhorst (1):
drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut

Maciej W. Rozycki (1):
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression

Marc Zyngier (2):
PCI: Add pci_reset_function_locked()
xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue

Masahiro Yamada (2):
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20

Mateusz Jurczyk (1):
fuse: initialize the flock flag in fuse_file on allocation

Max Filippov (3):
xtensa: fix cache aliasing handling code for WT cache
xtensa: mm/cache: add missing EXPORT_SYMBOLs
xtensa: don't limit csum_partial export by CONFIG_NET

Mel Gorman (1):
futex: Remove unnecessary warning from get_futex_key

Michael Neuling (1):
powerpc: Fix /proc/cpuinfo revision for POWER9 DD2

Miquel Raynal (1):
nand: fix wrong default oob layout for small pages using soft ecc

Mykola Kostenok (1):
iio: aspeed-adc: wait for initial sequence.

Neil Armstrong (2):
pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry
pinctrl: meson-gxl: Add missing GPIODV_18 pin entry

Nicholas Bellinger (2):
iscsi-target: Fix iscsi_np reset hung task during parallel delete
target: Fix node_acl demo-mode + uncached dynamic shutdown regression

Paul Burton (1):
Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."

Rafael J. Wysocki (1):
USB: hcd: Mark secondary HCD as dead if the primary one died

Sandeep Singh (1):
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume

Stefan Triller (1):

      USB: serial: cp210x: add support for Qivicon USB ZigBee dongle

Stefan-Gabriel Mirea (1):
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits

Steven J. Hill (1):
MIPS: Octeon: Fix broken EDAC driver.

Thomas Gleixner (1):
pinctrl: samsung: Remove bogus irq_[un]mask from resource management

Varun Prakash (1):
iscsi-target: fix memory leak in iscsit_setup_text_cmd()

Weston Andros Adamson (1):
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays

Wladimir J. van der Laan (1):
drm/etnaviv: Fix off-by-one error in reloc checking

Yoshihiro Shimoda (2):
usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3

author maintainer
#1 lore raw
Makefile +1 -1
index ebe69a704bca..6da481d08441 100644
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 12
-SUBLEVEL = 7
+SUBLEVEL = 8
 EXTRAVERSION =
 NAME = Fearless Coyote
 
arch/mips/dec/int-handler.S +6 -28
index 1910223a9c02..cea2bb1621e6 100644
@@ -147,23 +147,12 @@
 		 * Find irq with highest priority
 		 */
 		# open coded PTR_LA t1, cpu_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		# open coded la t1, cpu_mask_nr_tbl
 		lui	t1, %hi(cpu_mask_nr_tbl)
 		addiu	t1, %lo(cpu_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
-		# open coded dla t1, cpu_mask_nr_tbl
-		.set	push
-		.set	noat
-		lui	t1, %highest(cpu_mask_nr_tbl)
-		lui	AT, %hi(cpu_mask_nr_tbl)
-		daddiu	t1, t1, %higher(cpu_mask_nr_tbl)
-		daddiu	AT, AT, %lo(cpu_mask_nr_tbl)
-		dsll	t1, 32
-		daddu	t1, t1, AT
-		.set	pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
 #endif
 1:		lw	t2,(t1)
 		nop
@@ -214,23 +203,12 @@
 		 * Find irq with highest priority
 		 */
 		# open coded PTR_LA t1,asic_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		# open coded la t1, asic_mask_nr_tbl
 		lui	t1, %hi(asic_mask_nr_tbl)
 		addiu	t1, %lo(asic_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
-		# open coded dla t1, asic_mask_nr_tbl
-		.set	push
-		.set	noat
-		lui	t1, %highest(asic_mask_nr_tbl)
-		lui	AT, %hi(asic_mask_nr_tbl)
-		daddiu	t1, t1, %higher(asic_mask_nr_tbl)
-		daddiu	AT, AT, %lo(asic_mask_nr_tbl)
-		dsll	t1, 32
-		daddu	t1, t1, AT
-		.set	pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
 #endif
 2:		lw	t2,(t1)
 		nop
arch/mips/include/asm/cache.h +2 -0
index fc67947ed658..8b14c2706aa5 100644
@@ -9,6 +9,8 @@
 #ifndef _ASM_CACHE_H
 #define _ASM_CACHE_H
 
+#include <kmalloc.h>
+
 #define L1_CACHE_SHIFT		CONFIG_MIPS_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
arch/mips/include/asm/octeon/cvmx-l2c-defs.h +36 -1
index d045973ddb33..3ea84acf1814 100644
@@ -33,6 +33,10 @@
 #define CVMX_L2C_DBG (CVMX_ADD_IO_SEG(0x0001180080000030ull))
 #define CVMX_L2C_CFG (CVMX_ADD_IO_SEG(0x0001180080000000ull))
 #define CVMX_L2C_CTL (CVMX_ADD_IO_SEG(0x0001180080800000ull))
+#define CVMX_L2C_ERR_TDTX(block_id)					       \
+	(CVMX_ADD_IO_SEG(0x0001180080A007E0ull) + ((block_id) & 3) * 0x40000ull)
+#define CVMX_L2C_ERR_TTGX(block_id)					       \
+	(CVMX_ADD_IO_SEG(0x0001180080A007E8ull) + ((block_id) & 3) * 0x40000ull)
 #define CVMX_L2C_LCKBASE (CVMX_ADD_IO_SEG(0x0001180080000058ull))
 #define CVMX_L2C_LCKOFF (CVMX_ADD_IO_SEG(0x0001180080000060ull))
 #define CVMX_L2C_PFCTL (CVMX_ADD_IO_SEG(0x0001180080000090ull))
@@ -66,9 +70,40 @@
 		((offset) & 1) * 8)
 #define CVMX_L2C_WPAR_PPX(offset) (CVMX_ADD_IO_SEG(0x0001180080840000ull)    + \
 		((offset) & 31) * 8)
-#define CVMX_L2D_FUS3 (CVMX_ADD_IO_SEG(0x00011800800007B8ull))
 
 
+union cvmx_l2c_err_tdtx {
+	uint64_t u64;
+	struct cvmx_l2c_err_tdtx_s {
+		__BITFIELD_FIELD(uint64_t dbe:1,
+		__BITFIELD_FIELD(uint64_t sbe:1,
+		__BITFIELD_FIELD(uint64_t vdbe:1,
+		__BITFIELD_FIELD(uint64_t vsbe:1,
+		__BITFIELD_FIELD(uint64_t syn:10,
+		__BITFIELD_FIELD(uint64_t reserved_22_49:28,
+		__BITFIELD_FIELD(uint64_t wayidx:18,
+		__BITFIELD_FIELD(uint64_t reserved_2_3:2,
+		__BITFIELD_FIELD(uint64_t type:2,
+		;)))))))))
+	} s;
+};
+
+union cvmx_l2c_err_ttgx {
+	uint64_t u64;
+	struct cvmx_l2c_err_ttgx_s {
+		__BITFIELD_FIELD(uint64_t dbe:1,
+		__BITFIELD_FIELD(uint64_t sbe:1,
+		__BITFIELD_FIELD(uint64_t noway:1,
+		__BITFIELD_FIELD(uint64_t reserved_56_60:5,
+		__BITFIELD_FIELD(uint64_t syn:6,
+		__BITFIELD_FIELD(uint64_t reserved_22_49:28,
+		__BITFIELD_FIELD(uint64_t wayidx:15,
+		__BITFIELD_FIELD(uint64_t reserved_2_6:5,
+		__BITFIELD_FIELD(uint64_t type:2,
+		;)))))))))
+	} s;
+};
+
 union cvmx_l2c_cfg {
 	uint64_t u64;
 	struct cvmx_l2c_cfg_s {
arch/mips/include/asm/octeon/cvmx-l2d-defs.h new file +60 -0

60 lines not on this page · raw message

arch/mips/include/asm/octeon/cvmx.h +1 -0
index 9742202f2a32..e638735cc3ac 100644
@@ -62,6 +62,7 @@ enum cvmx_mips_space {
 #include <asm/octeon/cvmx-iob-defs.h>
 #include <asm/octeon/cvmx-ipd-defs.h>
 #include <asm/octeon/cvmx-l2c-defs.h>
+#include <asm/octeon/cvmx-l2d-defs.h>
 #include <asm/octeon/cvmx-l2t-defs.h>
 #include <asm/octeon/cvmx-led-defs.h>
 #include <asm/octeon/cvmx-mio-defs.h>
arch/powerpc/kernel/setup-common.c +4 -0
index 857129acf960..94a948207cd2 100644
@@ -335,6 +335,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 				maj = ((pvr >> 8) & 0xFF) - 1;
 				min = pvr & 0xFF;
 				break;
+			case 0x004e: /* POWER9 bits 12-15 give chip type */
+				maj = (pvr >> 8) & 0x0F;
+				min = pvr & 0xFF;
+				break;
 			default:
 				maj = (pvr >> 8) & 0xFF;
 				min = pvr & 0xFF;
arch/xtensa/kernel/xtensa_ksyms.c +0 -2
index d159e9b9c018..672391003e40 100644
@@ -94,13 +94,11 @@ unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
 }
 EXPORT_SYMBOL(__sync_fetch_and_or_4);
 
-#ifdef CONFIG_NET
 /*
  * Networking support
  */
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
-#endif /* CONFIG_NET */
 
 /*
  * Architecture-specific symbols
arch/xtensa/mm/cache.c +8 -8
index 1a804a2f9a5b..3c75c4e597da 100644
@@ -103,6 +103,7 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
 	clear_page_alias(kvaddr, paddr);
 	preempt_enable();
 }
+EXPORT_SYMBOL(clear_user_highpage);
 
 void copy_user_highpage(struct page *dst, struct page *src,
 			unsigned long vaddr, struct vm_area_struct *vma)
@@ -119,10 +120,7 @@ void copy_user_highpage(struct page *dst, struct page *src,
 	copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
 	preempt_enable();
 }
-
-#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
-
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+EXPORT_SYMBOL(copy_user_highpage);
 
 /*
  * Any time the kernel writes to a user page cache page, or it is about to
@@ -176,7 +174,7 @@ void flush_dcache_page(struct page *page)
 
 	/* There shouldn't be an entry in the cache for this page anymore. */
 }
-
+EXPORT_SYMBOL(flush_dcache_page);
 
 /*
  * For now, flush the whole cache. FIXME??
@@ -188,6 +186,7 @@ void local_flush_cache_range(struct vm_area_struct *vma,
 	__flush_invalidate_dcache_all();
 	__invalidate_icache_all();
 }
+EXPORT_SYMBOL(local_flush_cache_range);
 
 /* 
  * Remove any entry in the cache for this page. 
@@ -207,8 +206,9 @@ void local_flush_cache_page(struct vm_area_struct *vma, unsigned long address,
 	__flush_invalidate_dcache_page_alias(virt, phys);
 	__invalidate_icache_page_alias(virt, phys);
 }
+EXPORT_SYMBOL(local_flush_cache_page);
 
-#endif
+#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
 
 void
 update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
@@ -225,7 +225,7 @@ update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
 
 	flush_tlb_page(vma, addr);
 
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
 
 	if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
 		unsigned long phys = page_to_phys(page);
@@ -256,7 +256,7 @@ update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
  * flush_dcache_page() on the page.
  */
 
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
 
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		unsigned long vaddr, void *dst, const void *src,
block/blk-mq.c +2 -2
index 7353e0080062..2414e0cd3a02 100644
@@ -620,8 +620,8 @@ EXPORT_SYMBOL(blk_mq_kick_requeue_list);
 void blk_mq_delay_kick_requeue_list(struct request_queue *q,
 				    unsigned long msecs)
 {
-	kblockd_schedule_delayed_work(&q->requeue_work,
-				      msecs_to_jiffies(msecs));
+	kblockd_mod_delayed_work_on(WORK_CPU_UNBOUND, &q->requeue_work,
+				    msecs_to_jiffies(msecs));
 }
 EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
 
drivers/base/firmware_class.c +34 -15

110 lines not on this page · raw message

drivers/gpu/drm/bridge/tc358767.c +1 -1
index 5c26488e7a2d..0529e500c534 100644
@@ -1255,7 +1255,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	/* port@2 is the output port */
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &tc->panel, NULL);
-	if (ret)
+	if (ret && ret != -ENODEV)
 		return ret;
 
 	/* Shut down GPIO is optional */
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c +2 -2
index 1013765274da..0ceed22187df 100644
@@ -270,8 +270,8 @@ static int submit_reloc(struct etnaviv_gem_submit *submit, void *stream,
 		if (ret)
 			return ret;
 
-		if (r->reloc_offset >= bo->obj->base.size - sizeof(*ptr)) {
-			DRM_ERROR("relocation %u outside object", i);
+		if (r->reloc_offset > bo->obj->base.size - sizeof(*ptr)) {
+			DRM_ERROR("relocation %u outside object\n", i);
 			return -EINVAL;
 		}
 
drivers/gpu/drm/i915/intel_color.c +1 -0
index 306c6b06b330..17c4ae7e4e7c 100644
@@ -398,6 +398,7 @@ static void bdw_load_gamma_lut(struct drm_crtc_state *state, u32 offset)
 		}
 
 		/* Program the max register to clamp values > 1.0. */
+		i = lut_size - 1;
 		I915_WRITE(PREC_PAL_GC_MAX(pipe, 0),
 			   drm_color_lut_extract(lut[i].red, 16));
 		I915_WRITE(PREC_PAL_GC_MAX(pipe, 1),
drivers/i2c/busses/i2c-designware-platdrv.c +3 -0
index d1263b82d646..0703da1d946a 100644
@@ -254,6 +254,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	}
 
 	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+	/* Some broken DSTDs use 1MiHz instead of 1MHz */
+	if (acpi_speed == 1048576)
+		acpi_speed = 1000000;
 	/*
 	 * Find bus speed from the "clock-frequency" device property, ACPI
 	 * or by using fast mode if neither is set.
drivers/iio/accel/bmc150-accel-core.c +1 -8
index 6b5d3be283c4..807299dd45eb 100644
@@ -193,7 +193,6 @@ struct bmc150_accel_data {
 	struct regmap *regmap;
 	int irq;
 	struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
-	atomic_t active_intr;
 	struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
 	struct mutex mutex;
 	u8 fifo_mode, watermark;
@@ -493,11 +492,6 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
 		goto out_fix_power_state;
 	}
 
-	if (state)
-		atomic_inc(&data->active_intr);
-	else
-		atomic_dec(&data->active_intr);
-
 	return 0;
 
 out_fix_power_state:
@@ -1710,8 +1704,7 @@ static int bmc150_accel_resume(struct device *dev)
 	struct bmc150_accel_data *data = iio_priv(indio_dev);
 
 	mutex_lock(&data->mutex);
-	if (atomic_read(&data->active_intr))
-		bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+	bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
 	bmc150_accel_fifo_set_mode(data);
 	mutex_unlock(&data->mutex);
 
drivers/iio/accel/st_accel_core.c +32 -0
index 784670e2736b..2ee3ae11eb2a 100644
@@ -166,6 +166,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
@@ -234,6 +238,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
@@ -316,6 +324,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 				.en_mask = 0x08,
 			},
 		},
+		.sim = {
+			.addr = 0x24,
+			.value = BIT(0),
+		},
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
@@ -379,6 +391,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(1),
+		},
 		.multi_read_bit = true,
 		.bootime = 2, /* guess */
 	},
@@ -437,6 +453,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(7),
+		},
 		.multi_read_bit = false,
 		.bootime = 2, /* guess */
 	},
@@ -499,6 +519,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
@@ -547,6 +571,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(1),
+		},
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
@@ -614,6 +642,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
drivers/iio/adc/aspeed_adc.c +26 -0
index 62670cbfa2bb..87fd6e0ce5ee 100644
@@ -22,6 +22,7 @@
 
 #include <linux/iio/iio.h>
 #include <linux/iio/driver.h>
+#include <linux/iopoll.h>
 
 #define ASPEED_RESOLUTION_BITS		10
 #define ASPEED_CLOCKS_PER_SAMPLE	12
@@ -38,11 +39,17 @@
 
 #define ASPEED_ENGINE_ENABLE		BIT(0)
 
+#define ASPEED_ADC_CTRL_INIT_RDY	BIT(8)
+
+#define ASPEED_ADC_INIT_POLLING_TIME	500
+#define ASPEED_ADC_INIT_TIMEOUT		500000
+
 struct aspeed_adc_model_data {
 	const char *model_name;
 	unsigned int min_sampling_rate;	// Hz
 	unsigned int max_sampling_rate;	// Hz
 	unsigned int vref_voltage;	// mV
+	bool wait_init_sequence;
 };
 
 struct aspeed_adc_data {
@@ -211,6 +218,24 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 		goto scaler_error;
 	}
 
+	model_data = of_device_get_match_data(&pdev->dev);
+
+	if (model_data->wait_init_sequence) {
+		/* Enable engine in normal mode. */
+		writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
+		       data->base + ASPEED_REG_ENGINE_CONTROL);
+
+		/* Wait for initial sequence complete. */
+		ret = readl_poll_timeout(data->base + ASPEED_REG_ENGINE_CONTROL,
+					 adc_engine_control_reg_val,
+					 adc_engine_control_reg_val &
+					 ASPEED_ADC_CTRL_INIT_RDY,
+					 ASPEED_ADC_INIT_POLLING_TIME,
+					 ASPEED_ADC_INIT_TIMEOUT);
+		if (ret)
+			goto scaler_error;
+	}
+
 	/* Start all channels in normal mode. */
 	clk_prepare_enable(data->clk_scaler->clk);
 	adc_engine_control_reg_val = GENMASK(31, 16) |
@@ -270,6 +295,7 @@ static const struct aspeed_adc_model_data ast2500_model_data = {
 	.vref_voltage = 1800, // mV
 	.min_sampling_rate = 1,
 	.max_sampling_rate = 1000000,
+	.wait_init_sequence = true,
 };
 
 static const struct of_device_id aspeed_adc_matches[] = {
drivers/iio/adc/axp288_adc.c +31 -1
index 64799ad7ebad..7fd24949c0c1 100644
@@ -28,6 +28,8 @@
 #include <linux/iio/driver.h>
 
 #define AXP288_ADC_EN_MASK		0xF1
+#define AXP288_ADC_TS_PIN_GPADC		0xF2
+#define AXP288_ADC_TS_PIN_ON		0xF3
 
 enum axp288_adc_id {
 	AXP288_ADC_TS,
@@ -121,6 +123,16 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
 	return IIO_VAL_INT;
 }
 
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+				unsigned long address)
+{
+	/* channels other than GPADC do not need to switch TS pin */
+	if (address != AXP288_GP_ADC_H)
+		return 0;
+
+	return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
 static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *chan,
 			int *val, int *val2, long mask)
@@ -131,7 +143,16 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+					chan->address)) {
+			dev_err(&indio_dev->dev, "GPADC mode\n");
+			ret = -EINVAL;
+			break;
+		}
 		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+						chan->address))
+			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
 	default:
 		ret = -EINVAL;
@@ -141,6 +162,15 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+	/* ADC should be always enabled for internal FG to function */
+	if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+		return -EIO;
+
+	return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
 static const struct iio_info axp288_adc_iio_info = {
 	.read_raw = &axp288_adc_read_raw,
 	.driver_module = THIS_MODULE,
@@ -169,7 +199,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
 	 * Set ADC to enabled state at all time, including system suspend.
 	 * otherwise internal fuel gauge functionality may be affected.
 	 */
-	ret = regmap_write(info->regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+	ret = axp288_adc_set_state(axp20x->regmap);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to enable ADC device\n");
 		return ret;
drivers/iio/adc/vf610_adc.c +1 -1
index 01fc76f7d660..c168e0db329a 100644
@@ -77,7 +77,7 @@
 #define VF610_ADC_ADSTS_MASK		0x300
 #define VF610_ADC_ADLPC_EN		0x80
 #define VF610_ADC_ADHSC_EN		0x400
-#define VF610_ADC_REFSEL_VALT		0x100
+#define VF610_ADC_REFSEL_VALT		0x800
 #define VF610_ADC_REFSEL_VBG		0x1000
 #define VF610_ADC_ADTRG_HARD		0x2000
 #define VF610_ADC_AVGS_8		0x4000
drivers/iio/common/st_sensors/st_sensors_core.c +29 -0
index 79c8c7cd70d5..6e6a1ecc99dd 100644
@@ -550,6 +550,31 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL(st_sensors_read_info_raw);
 
+static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
+			const struct st_sensor_settings *sensor_settings)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	struct device_node *np = sdata->dev->of_node;
+	struct st_sensors_platform_data *pdata;
+
+	pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data;
+	if (((np && of_property_read_bool(np, "spi-3wire")) ||
+	     (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
+		int err;
+
+		err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
+					    sensor_settings->sim.addr,
+					    sensor_settings->sim.value);
+		if (err < 0) {
+			dev_err(&indio_dev->dev,
+				"failed to init interface mode\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 int st_sensors_check_device_support(struct iio_dev *indio_dev,
 			int num_sensors_list,
 			const struct st_sensor_settings *sensor_settings)
@@ -574,6 +599,10 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 		return -ENODEV;
 	}
 
+	err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
+	if (err < 0)
+		return err;
+
 	if (sensor_settings[i].wai_addr) {
 		err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
 					   sensor_settings[i].wai_addr, &wai);
drivers/iio/light/tsl2563.c +1 -1
index e7d4ea75e007..7599693f7fe9 100644
@@ -626,7 +626,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
 	struct tsl2563_chip *chip = iio_priv(dev_info);
 
 	iio_push_event(dev_info,
-		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+		       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
 					    0,
 					    IIO_EV_TYPE_THRESH,
 					    IIO_EV_DIR_EITHER),
drivers/iio/pressure/st_pressure_core.c +1 -1
index fd0edca0e656..99448012b47f 100644
@@ -456,7 +456,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = true,
+		.multi_read_bit = false,
 		.bootime = 2,
 	},
 };
drivers/mmc/core/mmc.c +1 -1
index 2c87dede5841..f451094acb8d 100644
@@ -1288,7 +1288,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
 static int mmc_select_hs400es(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
-	int err = 0;
+	int err = -EINVAL;
 	u8 val;
 
 	if (!(host->caps & MMC_CAP_8_BIT_DATA)) {
drivers/mtd/nand/atmel/pmecc.c +6 -15
index 55a8ee5306ea..8c210a5776bc 100644
@@ -945,6 +945,7 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
 		 */
 		struct platform_device *pdev = to_platform_device(userdev);
 		const struct atmel_pmecc_caps *caps;
+		const struct of_device_id *match;
 
 		/* No PMECC engine available. */
 		if (!of_property_read_bool(userdev->of_node,
@@ -953,21 +954,11 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
 
 		caps = &at91sam9g45_caps;
 
-		/*
-		 * Try to find the NFC subnode and extract the associated caps
-		 * from there.
-		 */
-		np = of_find_compatible_node(userdev->of_node, NULL,
-					     "atmel,sama5d3-nfc");
-		if (np) {
-			const struct of_device_id *match;
-
-			match = of_match_node(atmel_pmecc_legacy_match, np);
-			if (match && match->data)
-				caps = match->data;
-
-			of_node_put(np);
-		}
+		/* Find the caps associated to the NAND dev node. */
+		match = of_match_node(atmel_pmecc_legacy_match,
+				      userdev->of_node);
+		if (match && match->data)
+			caps = match->data;
 
 		pmecc = atmel_pmecc_create(pdev, caps, 1, 2);
 	}
drivers/mtd/nand/nand_base.c +10 -2
index b1dd12729f19..6f9771e82476 100644
@@ -65,8 +65,14 @@ static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
 
 	if (!section) {
 		oobregion->offset = 0;
-		oobregion->length = 4;
+		if (mtd->oobsize == 16)
+			oobregion->length = 4;
+		else
+			oobregion->length = 3;
 	} else {
+		if (mtd->oobsize == 8)
+			return -ERANGE;
+
 		oobregion->offset = 6;
 		oobregion->length = ecc->total - 4;
 	}
@@ -1102,7 +1108,9 @@ static int nand_setup_data_interface(struct nand_chip *chip)
 	 * Ensure the timing mode has been changed on the chip side
 	 * before changing timings on the controller side.
 	 */
-	if (chip->onfi_version) {
+	if (chip->onfi_version &&
+	    (le16_to_cpu(chip->onfi_params.opt_cmd) &
+	     ONFI_OPT_CMD_SET_GET_FEATURES)) {
 		u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
 			chip->onfi_timing_mode_default,
 		};
drivers/mtd/nand/nand_timings.c +3 -3
index f06312df3669..7e36d7d13c26 100644
@@ -311,9 +311,9 @@ int onfi_init_data_interface(struct nand_chip *chip,
 		struct nand_sdr_timings *timings = &iface->timings.sdr;
 
 		/* microseconds -> picoseconds */
-		timings->tPROG_max = 1000000UL * le16_to_cpu(params->t_prog);
-		timings->tBERS_max = 1000000UL * le16_to_cpu(params->t_bers);
-		timings->tR_max = 1000000UL * le16_to_cpu(params->t_r);
+		timings->tPROG_max = 1000000ULL * le16_to_cpu(params->t_prog);
+		timings->tBERS_max = 1000000ULL * le16_to_cpu(params->t_bers);
+		timings->tR_max = 1000000ULL * le16_to_cpu(params->t_r);
 
 		/* nanoseconds -> picoseconds */
 		timings->tCCS_min = 1000UL * le16_to_cpu(params->t_ccs);
drivers/pci/pci.c +103 -62

245 lines not on this page · raw message

drivers/pinctrl/intel/pinctrl-cherryview.c +7 -0
index 20f1b4493994..04e929fd0ffe 100644
@@ -1547,6 +1547,13 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 			DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
 		},
 	},
+	{
+		.ident = "HP Chromebook 11 G5 (Setzer)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
+		},
+	},
 	{
 		.ident = "Acer Chromebook R11 (Cyan)",
 		.matches = {
drivers/pinctrl/intel/pinctrl-merrifield.c +3 -3
index 4d4ef42a39b5..86c4b3fab7b0 100644
@@ -343,9 +343,9 @@ static const struct pinctrl_pin_desc mrfld_pins[] = {
 
 static const unsigned int mrfld_sdio_pins[] = { 50, 51, 52, 53, 54, 55, 56 };
 static const unsigned int mrfld_spi5_pins[] = { 90, 91, 92, 93, 94, 95, 96 };
-static const unsigned int mrfld_uart0_pins[] = { 124, 125, 126, 127 };
-static const unsigned int mrfld_uart1_pins[] = { 128, 129, 130, 131 };
-static const unsigned int mrfld_uart2_pins[] = { 132, 133, 134, 135 };
+static const unsigned int mrfld_uart0_pins[] = { 115, 116, 117, 118 };
+static const unsigned int mrfld_uart1_pins[] = { 119, 120, 121, 122 };
+static const unsigned int mrfld_uart2_pins[] = { 123, 124, 125, 126 };
 static const unsigned int mrfld_pwm0_pins[] = { 144 };
 static const unsigned int mrfld_pwm1_pins[] = { 145 };
 static const unsigned int mrfld_pwm2_pins[] = { 132 };
drivers/pinctrl/meson/pinctrl-meson-gxbb.c +1 -0
index 9b00be15d258..df942272ba54 100644
@@ -85,6 +85,7 @@ static const struct pinctrl_pin_desc meson_gxbb_periphs_pins[] = {
 	MESON_PIN(GPIODV_15, EE_OFF),
 	MESON_PIN(GPIODV_16, EE_OFF),
 	MESON_PIN(GPIODV_17, EE_OFF),
+	MESON_PIN(GPIODV_18, EE_OFF),
 	MESON_PIN(GPIODV_19, EE_OFF),
 	MESON_PIN(GPIODV_20, EE_OFF),
 	MESON_PIN(GPIODV_21, EE_OFF),
drivers/pinctrl/meson/pinctrl-meson-gxl.c +1 -0
index 998210eacf37..3046fd732155 100644
@@ -89,6 +89,7 @@ static const struct pinctrl_pin_desc meson_gxl_periphs_pins[] = {
 	MESON_PIN(GPIODV_15, EE_OFF),
 	MESON_PIN(GPIODV_16, EE_OFF),
 	MESON_PIN(GPIODV_17, EE_OFF),
+	MESON_PIN(GPIODV_18, EE_OFF),
 	MESON_PIN(GPIODV_19, EE_OFF),
 	MESON_PIN(GPIODV_20, EE_OFF),
 	MESON_PIN(GPIODV_21, EE_OFF),
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +1 -1
index 5c96f5558310..6aaeb0e9360e 100644
@@ -176,7 +176,7 @@ const struct armada_37xx_pin_data armada_37xx_pin_nb = {
 };
 
 const struct armada_37xx_pin_data armada_37xx_pin_sb = {
-	.nr_pins = 29,
+	.nr_pins = 30,
 	.name = "GPIO2",
 	.groups = armada_37xx_sb_groups,
 	.ngroups = ARRAY_SIZE(armada_37xx_sb_groups),
drivers/pinctrl/samsung/pinctrl-exynos.c +0 -4
index 7b0e6cc35e04..2ea8b1505138 100644
@@ -205,8 +205,6 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
 
 	spin_unlock_irqrestore(&bank->slock, flags);
 
-	exynos_irq_unmask(irqd);
-
 	return 0;
 }
 
@@ -226,8 +224,6 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
 	shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC];
 	mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
 
-	exynos_irq_mask(irqd);
-
 	spin_lock_irqsave(&bank->slock, flags);
 
 	con = readl(bank->eint_base + reg_con);
drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c +1 -0
index fb30b86a97ee..5fbbdbf349b8 100644
@@ -811,6 +811,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D16 */
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD12 */
 		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN6 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* DET */
 		  SUNXI_FUNCTION_IRQ(0x6, 16),		/* EINT16 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D16 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c +192 -172

396 lines not on this page · raw message

drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c +194 -189

419 lines not on this page · raw message

drivers/staging/comedi/comedi_fops.c +3 -0
index 4ed485a99c68..11d809780ee0 100644
@@ -2396,6 +2396,7 @@ static ssize_t comedi_write(struct file *file, const char __user *buf,
 			continue;
 		}
 
+		set_current_state(TASK_RUNNING);
 		wp = async->buf_write_ptr;
 		n1 = min(n, async->prealloc_bufsz - wp);
 		n2 = n - n1;
@@ -2528,6 +2529,8 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes,
 			}
 			continue;
 		}
+
+		set_current_state(TASK_RUNNING);
 		rp = async->buf_read_ptr;
 		n1 = min(n, async->prealloc_bufsz - rp);
 		n2 = n - n1;
drivers/staging/iio/resolver/ad2s1210.c +1 -1
index a6a8393d6664..3e00df74b18c 100644
@@ -472,7 +472,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 			     long m)
 {
 	struct ad2s1210_state *st = iio_priv(indio_dev);
-	bool negative;
+	u16 negative;
 	int ret = 0;
 	u16 pos;
 	s16 vel;
drivers/target/iscsi/iscsi_target.c +2 -0
index 3fdca2cdd8da..db843e3f355a 100644
@@ -418,6 +418,7 @@ int iscsit_reset_np_thread(
 		return 0;
 	}
 	np->np_thread_state = ISCSI_NP_THREAD_RESET;
+	atomic_inc(&np->np_reset_count);
 
 	if (np->np_thread) {
 		spin_unlock_bh(&np->np_thread_lock);
@@ -2173,6 +2174,7 @@ iscsit_setup_text_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	cmd->cmd_sn		= be32_to_cpu(hdr->cmdsn);
 	cmd->exp_stat_sn	= be32_to_cpu(hdr->exp_statsn);
 	cmd->data_direction	= DMA_NONE;
+	kfree(cmd->text_in_ptr);
 	cmd->text_in_ptr	= NULL;
 
 	return 0;
drivers/target/iscsi/iscsi_target_login.c +5 -2
index 92b96b51d506..e491cf75e92d 100644
@@ -1237,9 +1237,11 @@ static int __iscsi_target_login_thread(struct iscsi_np *np)
 	flush_signals(current);
 
 	spin_lock_bh(&np->np_thread_lock);
-	if (np->np_thread_state == ISCSI_NP_THREAD_RESET) {
+	if (atomic_dec_if_positive(&np->np_reset_count) >= 0) {
 		np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
+		spin_unlock_bh(&np->np_thread_lock);
 		complete(&np->np_restart_comp);
+		return 1;
 	} else if (np->np_thread_state == ISCSI_NP_THREAD_SHUTDOWN) {
 		spin_unlock_bh(&np->np_thread_lock);
 		goto exit;
@@ -1272,7 +1274,8 @@ static int __iscsi_target_login_thread(struct iscsi_np *np)
 		goto exit;
 	} else if (rc < 0) {
 		spin_lock_bh(&np->np_thread_lock);
-		if (np->np_thread_state == ISCSI_NP_THREAD_RESET) {
+		if (atomic_dec_if_positive(&np->np_reset_count) >= 0) {
+			np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
 			spin_unlock_bh(&np->np_thread_lock);
 			complete(&np->np_restart_comp);
 			iscsit_put_transport(conn->conn_transport);
drivers/target/target_core_tpg.c +2 -2
index 310d9e55c6eb..2d9ad10de3b3 100644
@@ -364,7 +364,7 @@ void core_tpg_del_initiator_node_acl(struct se_node_acl *acl)
 	mutex_lock(&tpg->acl_node_mutex);
 	if (acl->dynamic_node_acl)
 		acl->dynamic_node_acl = 0;
-	list_del(&acl->acl_list);
+	list_del_init(&acl->acl_list);
 	mutex_unlock(&tpg->acl_node_mutex);
 
 	target_shutdown_sessions(acl);
@@ -548,7 +548,7 @@ int core_tpg_deregister(struct se_portal_group *se_tpg)
 	 * in transport_deregister_session().
 	 */
 	list_for_each_entry_safe(nacl, nacl_tmp, &node_list, acl_list) {
-		list_del(&nacl->acl_list);
+		list_del_init(&nacl->acl_list);
 
 		core_tpg_wait_for_nacl_pr_ref(nacl);
 		core_free_device_list_for_node(nacl, se_tpg);
drivers/target/target_core_transport.c +2 -2
index 019763561e52..884780d2ec69 100644
@@ -466,7 +466,7 @@ static void target_complete_nacl(struct kref *kref)
 	}
 
 	mutex_lock(&se_tpg->acl_node_mutex);
-	list_del(&nacl->acl_list);
+	list_del_init(&nacl->acl_list);
 	mutex_unlock(&se_tpg->acl_node_mutex);
 
 	core_tpg_wait_for_nacl_pr_ref(nacl);
@@ -538,7 +538,7 @@ void transport_free_session(struct se_session *se_sess)
 			spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
 
 			if (se_nacl->dynamic_stop)
-				list_del(&se_nacl->acl_list);
+				list_del_init(&se_nacl->acl_list);
 		}
 		mutex_unlock(&se_tpg->acl_node_mutex);
 
drivers/usb/core/hcd.c +3 -1
index 5dea98358c05..cc4121605c53 100644
@@ -1878,7 +1878,7 @@ void usb_hcd_flush_endpoint(struct usb_device *udev,
 	/* No more submits can occur */
 	spin_lock_irq(&hcd_urb_list_lock);
 rescan:
-	list_for_each_entry (urb, &ep->urb_list, urb_list) {
+	list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
 		int	is_in;
 
 		if (urb->unlinked)
@@ -2475,6 +2475,8 @@ void usb_hc_died (struct usb_hcd *hcd)
 	}
 	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
 		hcd = hcd->shared_hcd;
+		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+		set_bit(HCD_FLAG_DEAD, &hcd->flags);
 		if (hcd->rh_registered) {
 			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
drivers/usb/core/hub.c +6 -4
index b8bb20d7acdb..0881a3e8131c 100644
@@ -4730,7 +4730,8 @@ hub_power_remaining(struct usb_hub *hub)
 static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		u16 portchange)
 {
-	int status, i;
+	int status = -ENODEV;
+	int i;
 	unsigned unit_load;
 	struct usb_device *hdev = hub->hdev;
 	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
@@ -4934,9 +4935,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 
 done:
 	hub_port_disable(hub, port1, 1);
-	if (hcd->driver->relinquish_port && !hub->hdev->parent)
-		hcd->driver->relinquish_port(hcd, port1);
-
+	if (hcd->driver->relinquish_port && !hub->hdev->parent) {
+		if (status != -ENOTCONN && status != -ENODEV)
+			hcd->driver->relinquish_port(hcd, port1);
+	}
 }
 
 /* Handle physical or logical connection change events.
drivers/usb/core/quirks.c +4 -0
index 3116edfcdc18..574da2b4529c 100644
@@ -150,6 +150,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* appletouch */
 	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
+	{ USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Avision AV600U */
 	{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
 	  USB_QUIRK_STRING_FETCH_255 },
@@ -249,6 +252,7 @@ static const struct usb_device_id usb_amd_resume_quirk_list[] = {
 	{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
 	{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
 	{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },
 
 	/* Logitech Optical Mouse M90/M100 */
 	{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
drivers/usb/gadget/udc/renesas_usb3.c +16 -5
index cd4c88529721..9f3addfca744 100644
@@ -758,21 +758,32 @@ static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep
 	return usb3_req;
 }
 
-static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
-			      struct renesas_usb3_request *usb3_req, int status)
+static void __usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+				struct renesas_usb3_request *usb3_req,
+				int status)
 {
 	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
-	unsigned long flags;
 
 	dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n",
 		usb3_ep->num, usb3_req->req.length, usb3_req->req.actual,
 		status);
 	usb3_req->req.status = status;
-	spin_lock_irqsave(&usb3->lock, flags);
 	usb3_ep->started = false;
 	list_del_init(&usb3_req->queue);
-	spin_unlock_irqrestore(&usb3->lock, flags);
+	spin_unlock(&usb3->lock);
 	usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req);
+	spin_lock(&usb3->lock);
+}
+
+static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+			      struct renesas_usb3_request *usb3_req, int status)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	__usb3_request_done(usb3_ep, usb3_req, status);
+	spin_unlock_irqrestore(&usb3->lock, flags);
 }
 
 static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3)
drivers/usb/host/pci-quirks.c +32 -5
index c8989c62a262..c8f38649f749 100644
@@ -98,6 +98,7 @@ enum amd_chipset_gen {
 	AMD_CHIPSET_HUDSON2,
 	AMD_CHIPSET_BOLTON,
 	AMD_CHIPSET_YANGTZE,
+	AMD_CHIPSET_TAISHAN,
 	AMD_CHIPSET_UNKNOWN,
 };
 
@@ -141,6 +142,11 @@ static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
 			pinfo->sb_type.gen = AMD_CHIPSET_SB700;
 		else if (rev >= 0x40 && rev <= 0x4f)
 			pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+	}
+	pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					  0x145c, NULL);
+	if (pinfo->smbus_dev) {
+		pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
 	} else {
 		pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
 				PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
@@ -260,11 +266,12 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
 {
 	/* Make sure amd chipset type has already been initialized */
 	usb_amd_find_chipset_info();
-	if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
-		return 0;
-
-	dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
-	return 1;
+	if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+	    amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+		dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+		return 1;
+	}
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
 
@@ -1150,3 +1157,23 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
+
+bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
+{
+	/*
+	 * Our dear uPD72020{1,2} friend only partially resets when
+	 * asked to via the XHCI interface, and may end up doing DMA
+	 * at the wrong addresses, as it keeps the top 32bit of some
+	 * addresses from its previous programming under obscure
+	 * circumstances.
+	 * Give it a good wack at probe time. Unfortunately, this
+	 * needs to happen before we've had a chance to discover any
+	 * quirk, or the system will be in a rather bad state.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    (pdev->device == 0x0014 || pdev->device == 0x0015))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);
drivers/usb/host/pci-quirks.h +1 -0
index 655994480198..5582cbafecd4 100644
@@ -15,6 +15,7 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
 void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
+bool usb_xhci_needs_pci_reset(struct pci_dev *pdev);
 #else
 struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
drivers/usb/host/xhci-pci.c +7 -0
index 1ef622ededfd..cefa223f9f08 100644
@@ -285,6 +285,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	driver = (struct hc_driver *)id->driver_data;
 
+	/* For some HW implementation, a XHCI reset is just not enough... */
+	if (usb_xhci_needs_pci_reset(dev)) {
+		dev_info(&dev->dev, "Resetting\n");
+		if (pci_reset_function_locked(dev))
+			dev_warn(&dev->dev, "Reset failed");
+	}
+
 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
 	pm_runtime_get_noresume(&dev->dev);
 
drivers/usb/musb/musb_host.c +1 -0
index dbe617a735d8..8bb57f76829d 100644
@@ -139,6 +139,7 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
 				"Could not flush host TX%d fifo: csr: %04x\n",
 				ep->epnum, csr))
 			return;
+		mdelay(1);
 	}
 }
 
drivers/usb/renesas_usbhs/rcar3.c +7 -2
index d544b331c9f2..02b67abfc2a1 100644
@@ -20,9 +20,13 @@
 /* Low Power Status register (LPSTS) */
 #define LPSTS_SUSPM	0x4000
 
-/* USB General control register 2 (UGCTRL2), bit[31:6] should be 0 */
+/*
+ * USB General control register 2 (UGCTRL2)
+ * Remarks: bit[31:11] and bit[9:6] should be 0
+ */
 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
 #define UGCTRL2_USB0SEL_OTG	0x00000030
+#define UGCTRL2_VBUSSEL		0x00000400
 
 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
 {
@@ -34,7 +38,8 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 {
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 
-	usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG);
+	usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG |
+		      UGCTRL2_VBUSSEL);
 
 	if (enable) {
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
drivers/usb/serial/cp210x.c +1 -0
index f64e914a8985..2d945c9f975c 100644
@@ -142,6 +142,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
+	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
drivers/usb/serial/option.c +2 -0
index ebe51f11105d..fe123153b1a5 100644
@@ -2025,6 +2025,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
drivers/usb/serial/pl2303.c +2 -0
index c9ebefd8f35f..a585b477415d 100644
@@ -52,6 +52,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
 		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
drivers/usb/serial/pl2303.h +1 -0
index 09d9be88209e..3b5a15d1dc0d 100644
@@ -27,6 +27,7 @@
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008
+#define ATEN_PRODUCT_UC485	0x2021
 #define ATEN_PRODUCT_ID2	0x2118
 
 #define IODATA_VENDOR_ID	0x04bb
drivers/usb/storage/unusual_uas.h +2 -2
index cbea9f329e71..cde115359793 100644
@@ -124,9 +124,9 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
 /* Reported-by: Benjamin Tissoires <[email protected]> */
 UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
 		"Initio Corporation",
-		"",
+		"INIC-3069",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_ATA_1X),
+		US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE),
 
 /* Reported-by: Tom Arild Naess <[email protected]> */
 UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
drivers/usb/storage/usb.c +12 -6
index 06615934fed1..0dceb9fa3a06 100644
@@ -315,6 +315,7 @@ static int usb_stor_control_thread(void * __us)
 {
 	struct us_data *us = (struct us_data *)__us;
 	struct Scsi_Host *host = us_to_host(us);
+	struct scsi_cmnd *srb;
 
 	for (;;) {
 		usb_stor_dbg(us, "*** thread sleeping\n");
@@ -330,6 +331,7 @@ static int usb_stor_control_thread(void * __us)
 		scsi_lock(host);
 
 		/* When we are called with no command pending, we're done */
+		srb = us->srb;
 		if (us->srb == NULL) {
 			scsi_unlock(host);
 			mutex_unlock(&us->dev_mutex);
@@ -398,14 +400,11 @@ static int usb_stor_control_thread(void * __us)
 		/* lock access to the state */
 		scsi_lock(host);
 
-		/* indicate that the command is done */
-		if (us->srb->result != DID_ABORT << 16) {
-			usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
-				     us->srb->result);
-			us->srb->scsi_done(us->srb);
-		} else {
+		/* was the command aborted? */
+		if (us->srb->result == DID_ABORT << 16) {
 SkipForAbort:
 			usb_stor_dbg(us, "scsi command aborted\n");
+			srb = NULL;	/* Don't call srb->scsi_done() */
 		}
 
 		/*
@@ -429,6 +428,13 @@ static int usb_stor_control_thread(void * __us)
 
 		/* unlock the device pointers */
 		mutex_unlock(&us->dev_mutex);
+
+		/* now that the locks are released, notify the SCSI core */
+		if (srb) {
+			usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
+					srb->result);
+			srb->scsi_done(srb);
+		}
 	} /* for (;;) */
 
 	/* Wait until we are told to stop */
fs/fuse/file.c +1 -1
index 3ee4fdc3da9e..76eac2a554c4 100644
@@ -46,7 +46,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
 {
 	struct fuse_file *ff;
 
-	ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
+	ff = kzalloc(sizeof(struct fuse_file), GFP_KERNEL);
 	if (unlikely(!ff))
 		return NULL;
 
fs/nfs/Kconfig +1 -0
index 69d02cf8cf37..5f93cfacb3d1 100644
@@ -121,6 +121,7 @@ config PNFS_FILE_LAYOUT
 config PNFS_BLOCK
 	tristate
 	depends on NFS_V4_1 && BLK_DEV_DM
+	depends on 64BIT || LBDAF
 	default NFS_V4
 
 config PNFS_FLEXFILE_LAYOUT
fs/nfs/flexfilelayout/flexfilelayoutdev.c +1 -0
index 6df7a0cf5660..f32c58bbe556 100644
@@ -32,6 +32,7 @@ void nfs4_ff_layout_free_deviceid(struct nfs4_ff_layout_ds *mirror_ds)
 {
 	nfs4_print_deviceid(&mirror_ds->id_node.deviceid);
 	nfs4_pnfs_ds_put(mirror_ds->ds);
+	kfree(mirror_ds->ds_versions);
 	kfree_rcu(mirror_ds, id_node.rcu);
 }
 
fs/xfs/xfs_log_cil.c +1 -0
index 82f1cbcc4de1..1f53dc23aebe 100644
@@ -519,6 +519,7 @@ xlog_discard_endio(
 
 	INIT_WORK(&ctx->discard_endio_work, xlog_discard_endio_work);
 	queue_work(xfs_discard_wq, &ctx->discard_endio_work);
+	bio_put(bio);
 }
 
 static void
include/linux/iio/common/st_sensors.h +7 -0
index 497f2b3a5a62..97f1b465d04f 100644
@@ -105,6 +105,11 @@ struct st_sensor_fullscale {
 	struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
 };
 
+struct st_sensor_sim {
+	u8 addr;
+	u8 value;
+};
+
 /**
  * struct st_sensor_bdu - ST sensor device block data update
  * @addr: address of the register.
@@ -197,6 +202,7 @@ struct st_sensor_transfer_function {
  * @bdu: Block data update register.
  * @das: Data Alignment Selection register.
  * @drdy_irq: Data ready register of the sensor.
+ * @sim: SPI serial interface mode register of the sensor.
  * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
  * @bootime: samples to discard when sensor passing from power-down to power-up.
  */
@@ -213,6 +219,7 @@ struct st_sensor_settings {
 	struct st_sensor_bdu bdu;
 	struct st_sensor_das das;
 	struct st_sensor_data_ready_irq drdy_irq;
+	struct st_sensor_sim sim;
 	bool multi_read_bit;
 	unsigned int bootime;
 };
include/linux/mtd/nand.h +3 -3
index 8f67b1581683..a3ebb64b1cf4 100644
@@ -638,10 +638,10 @@ struct nand_buffers {
  * @tWW_min: WP# transition to WE# low
  */
 struct nand_sdr_timings {
-	u32 tBERS_max;
+	u64 tBERS_max;
 	u32 tCCS_min;
-	u32 tPROG_max;
-	u32 tR_max;
+	u64 tPROG_max;
+	u64 tR_max;
 	u32 tALH_min;
 	u32 tADL_min;
 	u32 tALS_min;
include/linux/pci.h +1 -0
index 8039f9f0ca05..16be18678ca1 100644
@@ -1049,6 +1049,7 @@ void pcie_flr(struct pci_dev *dev);
 int __pci_reset_function(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
+int pci_reset_function_locked(struct pci_dev *dev);
 int pci_try_reset_function(struct pci_dev *dev);
 int pci_probe_reset_slot(struct pci_slot *slot);
 int pci_reset_slot(struct pci_slot *slot);
include/linux/platform_data/st_sensors_pdata.h +2 -0
index 79b0e4cdb814..f8274b0c6888 100644
@@ -17,10 +17,12 @@
  *	Available only for accelerometer and pressure sensors.
  *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
  * @open_drain: set the interrupt line to be open drain if possible.
+ * @spi_3wire: enable spi-3wire mode.
  */
 struct st_sensors_platform_data {
 	u8 drdy_int_pin;
 	bool open_drain;
+	bool spi_3wire;
 };
 
 #endif /* ST_SENSORS_PDATA_H */
include/target/iscsi/iscsi_target_core.h +1 -0
index 1628cc34b357..ed766dcb9cb7 100644
@@ -787,6 +787,7 @@ struct iscsi_np {
 	int			np_sock_type;
 	enum np_thread_state_table np_thread_state;
 	bool                    enabled;
+	atomic_t		np_reset_count;
 	enum iscsi_timer_flags_table np_login_timer_flags;
 	u32			np_exports;
 	enum np_flags_table	np_flags;
kernel/futex.c +3 -2
index 357348a6cf6b..bb8b5a9fcdd5 100644
@@ -670,13 +670,14 @@ get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
 		 * this reference was taken by ihold under the page lock
 		 * pinning the inode in place so i_lock was unnecessary. The
 		 * only way for this check to fail is if the inode was
-		 * truncated in parallel so warn for now if this happens.
+		 * truncated in parallel which is almost certainly an
+		 * application bug. In such a case, just retry.
 		 *
 		 * We are not calling into get_futex_key_refs() in file-backed
 		 * cases, therefore a successful atomic_inc return below will
 		 * guarantee that get_futex_key() will still imply smp_mb(); (B).
 		 */
-		if (WARN_ON_ONCE(!atomic_inc_not_zero(&inode->i_count))) {
+		if (!atomic_inc_not_zero(&inode->i_count)) {
 			rcu_read_unlock();
 			put_page(page);
 
mm/page_alloc.c +1 -1
index 2302f250d6b1..07569fa25760 100644
@@ -7567,7 +7567,7 @@ int alloc_contig_range(unsigned long start, unsigned long end,
 
 	/* Make sure the range is really isolated. */
 	if (test_pages_isolated(outer_start, end, false)) {
-		pr_info("%s: [%lx, %lx) PFNs busy\n",
+		pr_info_ratelimited("%s: [%lx, %lx) PFNs busy\n",
 			__func__, outer_start, end);
 		ret = -EBUSY;
 		goto done;
mm/shmem.c +10 -2
index e67d6ba4e98e..1183e898743b 100644
@@ -1021,7 +1021,11 @@ static int shmem_setattr(struct dentry *dentry, struct iattr *attr)
 			 */
 			if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE)) {
 				spin_lock(&sbinfo->shrinklist_lock);
-				if (list_empty(&info->shrinklist)) {
+				/*
+				 * _careful to defend against unlocked access to
+				 * ->shrink_list in shmem_unused_huge_shrink()
+				 */
+				if (list_empty_careful(&info->shrinklist)) {
 					list_add_tail(&info->shrinklist,
 							&sbinfo->shrinklist);
 					sbinfo->shrinklist_len++;
@@ -1817,7 +1821,11 @@ alloc_nohuge:		page = shmem_alloc_and_acct_page(gfp, info, sbinfo,
 			 * to shrink under memory pressure.
 			 */
 			spin_lock(&sbinfo->shrinklist_lock);
-			if (list_empty(&info->shrinklist)) {
+			/*
+			 * _careful to defend against unlocked access to
+			 * ->shrink_list in shmem_unused_huge_shrink()
+			 */
+			if (list_empty_careful(&info->shrinklist)) {
 				list_add_tail(&info->shrinklist,
 						&sbinfo->shrinklist);
 				sbinfo->shrinklist_len++;