staging: typec: tcpm: explicit_contract is always established
PATCH 1/1 staging: typec: tcpm: explicit_contract is always established
While in SNK_READY state, the explicit_contract seems to be set to true irrespective of whether an explicit contract was established for the current connection. TCPM also seems to report the pwr_opmode as TYPEC_PWR_MODE_PD always once the port gets into SNK_READY state. This isn't completely true as port gets into the SNK_READY state for non-pd type-c ports as well.
This patch sets the explicit_contract flag only when the PS_READY message is received and the vbus has been detected by the port controller.
Signed-off-by Badhri Jagan Sridharan <[email protected]>
--- drivers/staging/typec/tcpm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/staging/typec/tcpm.c +7 -3
@@ -1373,6 +1373,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,tcpm_set_current_limit (port, port->current_limit, port->supply_voltage); + port->explicit_contract = true;tcpm_set_state (port,SNK_READY ,0 ); }else {/*
@@ -2467,9 +2468,11 @@ static void run_state_machine(struct tcpm_port *port)break ;case SNK_READY : port->try_snk_count =0 ; - port->explicit_contract = true; -typec_set_pwr_opmode (port->typec_port,TYPEC_PWR_MODE_PD ); - port->pwr_opmode =TYPEC_PWR_MODE_PD ; +if (port->explicit_contract) { +typec_set_pwr_opmode (port->typec_port, +TYPEC_PWR_MODE_PD ); + port->pwr_opmode =TYPEC_PWR_MODE_PD ; + }tcpm_swap_complete (port,0 );tcpm_typec_connect (port);
@@ -2958,6 +2961,7 @@ static void _tcpm_pd_vbus_on(struct tcpm_port *port) port->vbus_present = true;switch (port->state) {case SNK_TRANSITION_SINK_VBUS : + port->explicit_contract = true;tcpm_set_state (port,SNK_READY ,0 );break ;case SNK_DISCOVERY :
Signature · 1 line
2.14.1.480.gb18f417b89-goog