Skip to contentSkip to conversation

drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

PATCH Superseded Eric Anholt 2 participants 2 messages Aug 17, 2017 – Oct 11, 2017

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

VC4's DSI1 has a bug where the AXI connection is broken for 32-bit writes from the CPU, so we use the DMA engine to DMA 32-bit values into registers instead. That sleeps, so we can't do it from the top half.

As a solution (suggested by Arnd), we can mask the IRQ in the irqchip in the top half, and re-enable it from an irqthread.

---
 drivers/gpu/drm/vc4/vc4_dsi.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
drivers/gpu/drm/vc4/vc4_dsi.c +37 -2
index ec1d646b3151..9556236b67d0 100644
@@ -516,6 +516,8 @@ struct vc4_dsi {
 	/* Whether we're on bcm2835's DSI0 or DSI1. */
 	int port;
 
+	int irq;
+
 	/* DSI channel for the panel we're connected to. */
 	u32 channel;
 	u32 lanes;
@@ -1360,6 +1362,28 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
 	*ret = IRQ_HANDLED;
 }
 
+/* Initial handler for port 1 where we need the reg_dma workaround.
+ * The register DMA writes sleep, so we can't do it in the top half.
+ * Instead we just disable the interrupt in the only way we have
+ * available (mask it in the irqchip), and continue on to the threaded
+ * handler.
+ */
+static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
+{
+	struct vc4_dsi *dsi = data;
+	u32 stat = DSI_PORT_READ(INT_STAT);
+
+	if (!stat)
+		return IRQ_NONE;
+
+	disable_irq_nosync(dsi->irq);
+
+	return IRQ_WAKE_THREAD;
+}
+
+/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
+ * 1 where we need the reg_dma workaround.
+ */
 static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
 {
 	struct vc4_dsi *dsi = data;
@@ -1368,6 +1392,9 @@ static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
 
 	DSI_PORT_WRITE(INT_STAT, stat);
 
+	if (dsi->reg_dma_mem)
+		enable_irq(dsi->irq);
+
 	dsi_handle_error(dsi, &ret, stat,
 			 DSI1_INT_ERR_SYNC_ESC, "LPDT sync");
 	dsi_handle_error(dsi, &ret, stat,
@@ -1539,8 +1566,16 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	/* Clear any existing interrupt state. */
 	DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
 
-	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
-			       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	dsi->irq = platform_get_irq(pdev, 0);
+	if (dsi->reg_dma_mem) {
+		ret = devm_request_threaded_irq(dev, dsi->irq,
+						vc4_dsi_irq_defer_to_thread_handler,
+						vc4_dsi_irq_handler, 0,
+						"vc4 dsi", dsi);
+	} else {
+		ret = devm_request_irq(dev, dsi->irq,
+				       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	}
 	if (ret) {
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get interrupt: %d\n", ret);
Signature · 6 lines
2.14.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw
Quoted 35 lines · On Thu, 17 Aug 2017 14:04:55 -0700 Eric Anholt <[email protected]> wrote:

VC4's DSI1 has a bug where the AXI connection is broken for 32-bit writes from the CPU, so we use the DMA engine to DMA 32-bit values into registers instead. That sleeps, so we can't do it from the top half.

As a solution (suggested by Arnd), we can mask the IRQ in the irqchip in the top half, and re-enable it from an irqthread.

---
 drivers/gpu/drm/vc4/vc4_dsi.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
drivers/gpu/drm/vc4/vc4_dsi.c +7 -0
index ec1d646b3151..9556236b67d0 100644
@@ -516,6 +516,8 @@ struct vc4_dsi {
 	/* Whether we're on bcm2835's DSI0 or DSI1. */
 	int port;
 
+	int irq;
+
 	/* DSI channel for the panel we're connected to. */
 	u32 channel;
 	u32 lanes;
@@ -1360,6 +1362,28 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
 	*ret = IRQ_HANDLED;
 }
 
+/* Initial handler for port 1 where we need the reg_dma workaround.
+ * The register DMA writes sleep, so we can't do it in the top half.
+ * Instead we just disable the interrupt in the only way we have
+ * available (mask it in the irqchip), and continue on to the threaded
+ * handler.

drivers/gpu/drm/vc4/vc4_dsi.c static void dsi_handle_error(struct vc4_dsi *dsi, · line 1379

Quoted 10 lines
drivers/gpu/drm/vc4/vc4_dsi.c +10 -0
+ */
+static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
+{
+	struct vc4_dsi *dsi = data;
+	u32 stat = DSI_PORT_READ(INT_STAT);
+
+	if (!stat)
+		return IRQ_NONE;
+
+	disable_irq_nosync(dsi->irq);

Are you sure you need to explicitly disable the IRQ here? Did you try with an IRQF_ONESHOT flag when registering your irq handler (this should do exactly what you're doing here: mask the interrupt until the threaded handler returns IRQ_DONE or IRQ_NONE [1])?

[1]http://elixir.free-electrons.com/linux/v4.3.2/source/include/linux/interrupt.h#L50

Quoted 29 lines
drivers/gpu/drm/vc4/vc4_dsi.c +13 -2
+
+	return IRQ_WAKE_THREAD;
+}
+
+/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
+ * 1 where we need the reg_dma workaround.
+ */
 static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
 {
 	struct vc4_dsi *dsi = data;
@@ -1368,6 +1392,9 @@ static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
 
 	DSI_PORT_WRITE(INT_STAT, stat);
 
+	if (dsi->reg_dma_mem)
+		enable_irq(dsi->irq);
+
 	dsi_handle_error(dsi, &ret, stat,
 			 DSI1_INT_ERR_SYNC_ESC, "LPDT sync");
 	dsi_handle_error(dsi, &ret, stat,
@@ -1539,8 +1566,16 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	/* Clear any existing interrupt state. */
 	DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
 
-	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
-			       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	dsi->irq = platform_get_irq(pdev, 0);
+	if (dsi->reg_dma_mem) {
+		ret = devm_request_threaded_irq(dev, dsi->irq,

drivers/gpu/drm/vc4/vc4_dsi.c static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) · line 1581

Quoted 10 lines
drivers/gpu/drm/vc4/vc4_dsi.c +7 -0
+						vc4_dsi_irq_defer_to_thread_handler,
+						vc4_dsi_irq_handler, 0,
+						"vc4 dsi", dsi);
+	} else {
+		ret = devm_request_irq(dev, dsi->irq,
+				       vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
+	}
 	if (ret) {
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get interrupt: %d\n", ret);

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel