Added support for LeMaker BananaPi M2 Plus board.
PATCH 1/1 Added support for LeMaker BananaPi M2 Plus board.
Signed-off-by Mike Harmony <[email protected]>
--- DEVELOPERS | 4 ++++ board/lemaker/m2-plus/boot.cmd | 7 +++++++ board/lemaker/m2-plus/genimage.cfg | 33 +++++++++++++++++++++++++++++++++ board/lemaker/m2-plus/post-build.sh | 12 ++++++++++++ configs/bananapi_m2_plus_defconfig | 33 +++++++++++++++++++++++++++++++++ 5 files changed, 89 insertions(+) create mode 100644 board/lemaker/m2-plus/boot.cmd create mode 100644 board/lemaker/m2-plus/genimage.cfg create mode 100755 board/lemaker/m2-plus/post-build.sh create mode 100644 configs/bananapi_m2_plus_defconfig
DEVELOPERS +4 -0
@@ -1234,6 +1234,10 @@ N: Micha? ?yszczek <[email protected]> F: board/altera/socrates_cyclone5/ F: configs/socrates_cyclone5_defconfig +N: Mike Harmony <[email protected]> +F: board/lemaker/m2-plus/ +F: configs/bananapi_m2_plus_defconfig + N: Mikhail Boiko <[email protected]> F: package/libfribidi/
board/lemaker/m2-plus/boot.cmd new file +7 -0
@@ -0,0 +1,7 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +mmc dev 0 +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h3-bananapi-m2-plus.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/lemaker/m2-plus/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h3-bananapi-m2-plus.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/lemaker/m2-plus/post-build.sh new file +12 -0
@@ -0,0 +1,12 @@ +#!/bin/sh + +# Remove all but the brcmfmac43362 firmware files +find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete + +BOARD_DIR="$(dirname $0)" +MKIMAGE=$HOST_DIR/usr/bin/mkimage +BOOT_CMD=$BOARD_DIR/boot.cmd +BOOT_CMD_H=$BINARIES_DIR/boot.scr + +# U-Boot script +$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
configs/bananapi_m2_plus_defconfig new file +33 -0
@@ -0,0 +1,33 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_KERNEL_HEADERS_4_12=y +BR2_BINUTILS_VERSION_2_27_X=y +BR2_GCC_VERSION_5_X=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Plus" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/lemaker/m2-plus/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/lemaker/m2-plus/genimage.cfg board/bananapi/m2-plus/boot.cmd" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://git.kernel.org/torvalds/t/linux-4.13-rc5.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-bananapi-m2-plus" +BR2_PACKAGE_IPERF3=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Sinovoip_BPI_M2_Plus" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_PACKAGE_HOST_GENEXT2FS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_TARGET_ROOTFS_EXT2_BLOCKS=61440
Signature · 1 line
2.7.4
PATCH 1/1 Added support for LeMaker BananaPi M2 Plus board.
Hello,
Quoted 1 line · Mike Harmony
Signed-off-by Mike Harmony <[email protected]>
Thanks for this new iteration! A few comments below, it's almost ready to go.
board/lemaker/m2-plus/post-build.sh line 4
Quoted 10 lines
board/lemaker/m2-plus/post-build.sh new file +4
-0@@ -0,0 +1,12 @@ +#!/bin/sh + +# Remove all but the brcmfmac43362 firmware files +find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete
Your defconfig does not enable any firmware related package, so this seems useless.
board/lemaker/m2-plus/post-build.sh line 12
Quoted 7 lines
board/lemaker/m2-plus/post-build.sh new file +7
-0+BOARD_DIR="$(dirname $0)" +MKIMAGE=$HOST_DIR/usr/bin/mkimage +BOOT_CMD=$BOARD_DIR/boot.cmd +BOOT_CMD_H=$BINARIES_DIR/boot.scr + +# U-Boot script +$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H
You can remove this, and use BR2_TARGET_UBOOT_BOOT_SCRIPT instead.
configs/bananapi_m2_plus_defconfig line 6
Quoted 12 lines
configs/bananapi_m2_plus_defconfig new file +6
-0@@ -0,0 +1,33 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_KERNEL_HEADERS_4_12=y +BR2_BINUTILS_VERSION_2_27_X=y +BR2_GCC_VERSION_5_X=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y
Please remove those four lines, and keep the default toolchain configuration. However, make sure to use:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_12=y
configs/bananapi_m2_plus_defconfig line 18
Quoted 12 lines
configs/bananapi_m2_plus_defconfig new file +12
-0+BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Plus" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/lemaker/m2-plus/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/lemaker/m2-plus/genimage.cfg board/bananapi/m2-plus/boot.cmd" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://git.kernel.org/torvalds/t/linux-4.13-rc5.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-bananapi-m2-plus" +BR2_PACKAGE_IPERF3=y
Please remove this package, we want minimal configurations.
configs/bananapi_m2_plus_defconfig line 21
Quoted 3 lines
configs/bananapi_m2_plus_defconfig new file +3
-0+BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
Please drop this option, it is not needed.
configs/bananapi_m2_plus_defconfig line 25
Quoted 4 lines
configs/bananapi_m2_plus_defconfig new file +4
-0+BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
The final 2017.07 has been published in July, could you use that instead of this release candidate ?
configs/bananapi_m2_plus_defconfig line 33
Quoted 8 lines
configs/bananapi_m2_plus_defconfig new file +8
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Sinovoip_BPI_M2_Plus" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_PACKAGE_HOST_GENEXT2FS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_TARGET_ROOTFS_EXT2_BLOCKS=61440
This last option no longer exists in Buildroot, so please drop it. The replacement is BR2_TARGET_ROOTFS_EXT2_SIZE, but the default value of 60MB should be sufficient.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com