Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Subsystems (14)
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Hello,
While adding support for new platforms, I found out that many, many platforms define pretty much the same values for:
CONFIG_SYS_CBSIZE
CONFIG_SYS_PBSIZE
CONFIG_SYS_MAXARGS
CONFIG_SYS_BARGSIZE
with just a few platforms deviating from the values that have clearly been copy/pasted over and over again all over the place.
In this patch series, I propose to have U-Boot define some sane defaults for those 4 configuration options, and cleanup all the board configuration files that were using the default values. This leads to the removal of 1300+ lines.
Of course, this is all open for discussion, and at this point, I have only done minimal build testing, as my goal is to get the discussion started.
Open questions:
- Do we really need to have all those remaining boards with custom/arbitrary values for those configuration options?
- Does it really makes sense for those configuration options to be customized in board configuration files? For example, the size of the kernel command line is not at all tied to the underlying hardware, but rather how much arguments the user wants to pass to the kernel. Ditto for the maximum number of arguments passed to U-Boot commands. Perhaps we want to remove those options entirely from the .h files, and simply have a Kconfig option instead?
Also, let me know if I have missed some existing work in this area.
Thanks for your feedback!
Thomas Petazzoni
Thomas Petazzoni (8):
include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE include/configs: remove CONFIG_SYS_CBSIZE when the default value is
used
include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE include/configs: drop default definitions of CONFIG_SYS_PBSIZE include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS include/configs: drop default definitions of CONFIG_SYS_MAXARGS include/configs: remove default values of CONFIG_SYS_BARGSIZE include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions
include/config_fallbacks.h | 15 ++++++++++++++- include/configs/10m50_devboard.h | 6 ------ include/configs/3c120_devboard.h | 6 ------ include/configs/B4860QDS.h | 8 -------- include/configs/BSC9131RDB.h | 3 --- include/configs/BSC9132QDS.h | 10 ---------- include/configs/C29XPCIE.h | 6 ------ include/configs/M5208EVBE.h | 9 --------- include/configs/M52277EVB.h | 9 --------- include/configs/M5235EVB.h | 9 --------- include/configs/M5249EVB.h | 9 --------- include/configs/M5253DEMO.h | 9 --------- include/configs/M5253EVBE.h | 9 --------- include/configs/M5272C3.h | 9 --------- include/configs/M5275EVB.h | 9 --------- include/configs/M5282EVB.h | 9 --------- include/configs/M53017EVB.h | 9 --------- include/configs/M5329EVB.h | 9 --------- include/configs/M5373EVB.h | 9 --------- include/configs/M54418TWR.h | 12 ------------ include/configs/M54451EVB.h | 7 ------- include/configs/M54455EVB.h | 9 --------- include/configs/M5475EVB.h | 9 --------- include/configs/M5485EVB.h | 9 --------- include/configs/MCR3000.h | 4 ---- include/configs/MPC8308RDB.h | 3 --- include/configs/MPC8313ERDB.h | 4 ---- include/configs/MPC8315ERDB.h | 12 ------------ include/configs/MPC8323ERDB.h | 12 ------------ include/configs/MPC832XEMDS.h | 12 ------------ include/configs/MPC8349EMDS.h | 12 ------------ include/configs/MPC8349ITX.h | 12 ------------ include/configs/MPC837XEMDS.h | 12 ------------ include/configs/MPC837XERDB.h | 12 ------------ include/configs/MPC8536DS.h | 9 --------- include/configs/MPC8540ADS.h | 10 ---------- include/configs/MPC8541CDS.h | 8 -------- include/configs/MPC8544DS.h | 8 -------- include/configs/MPC8548CDS.h | 8 -------- include/configs/MPC8555CDS.h | 8 -------- include/configs/MPC8560ADS.h | 8 -------- include/configs/MPC8568MDS.h | 8 -------- include/configs/MPC8569MDS.h | 2 -- include/configs/MPC8572DS.h | 8 -------- include/configs/MPC8610HPCD.h | 10 ---------- include/configs/MPC8641HPCN.h | 10 ---------- include/configs/MigoR.h | 3 --- include/configs/P1010RDB.h | 10 ---------- include/configs/P1022DS.h | 9 --------- include/configs/P1023RDB.h | 10 ---------- include/configs/P2041RDB.h | 11 ----------- include/configs/T102xQDS.h | 8 -------- include/configs/T102xRDB.h | 8 -------- include/configs/T1040QDS.h | 8 -------- include/configs/T104xRDB.h | 8 -------- include/configs/T208xQDS.h | 8 -------- include/configs/T208xRDB.h | 8 -------- include/configs/T4240RDB.h | 8 -------- include/configs/TQM834x.h | 12 ------------ include/configs/UCP1020.h | 9 --------- include/configs/adp-ae3xx.h | 11 ----------- include/configs/adp-ag101p.h | 11 ----------- include/configs/advantech_dms-ba16.h | 4 ---- include/configs/am3517_crane.h | 5 ----- include/configs/am3517_evm.h | 5 ----- include/configs/amcore.h | 14 -------------- include/configs/ap121.h | 4 ---- include/configs/ap143.h | 4 ---- include/configs/ap325rxa.h | 6 ------ include/configs/ap_sh4a_4a.h | 6 ------ include/configs/apalis-tk1.h | 3 --- include/configs/apalis_t30.h | 3 --- include/configs/apf27.h | 4 ---- include/configs/aristainetos-common.h | 3 --- include/configs/armadillo-800eva.h | 3 --- include/configs/aspeed-common.h | 7 ------- include/configs/astro_mcf5373l.h | 9 --------- include/configs/at91-sama5_common.h | 2 -- include/configs/at91rm9200ek.h | 5 ----- include/configs/at91sam9260ek.h | 2 -- include/configs/at91sam9261ek.h | 2 -- include/configs/at91sam9263ek.h | 2 -- include/configs/at91sam9m10g45ek.h | 2 -- include/configs/at91sam9n12ek.h | 2 -- include/configs/at91sam9rlek.h | 2 -- include/configs/at91sam9x5ek.h | 2 -- include/configs/axs10x.h | 5 ----- include/configs/bcm23550_w1d.h | 2 -- include/configs/bcm28155_ap.h | 2 -- include/configs/bcm_ep_board.h | 2 -- include/configs/bcm_northstar2.h | 2 -- include/configs/boston.h | 4 ---- include/configs/bur_cfg_common.h | 5 ----- include/configs/calimain.h | 2 -- include/configs/cm_fx6.h | 4 ---- include/configs/cm_t35.h | 7 ------- include/configs/cm_t3517.h | 5 ----- include/configs/cobra5272.h | 9 --------- include/configs/colibri_pxa270.h | 5 ----- include/configs/colibri_t20.h | 3 --- include/configs/colibri_t30.h | 3 --- include/configs/colibri_vf.h | 3 --- include/configs/controlcenterd.h | 9 --------- include/configs/corenet_ds.h | 8 -------- include/configs/corvus.h | 4 ---- include/configs/cyrus.h | 8 -------- include/configs/da850evm.h | 2 -- include/configs/dbau1x00.h | 4 ---- include/configs/devkit3250.h | 3 --- include/configs/dragonboard410c.h | 3 --- include/configs/ea20.h | 2 -- include/configs/eb_cpu5282.h | 2 -- include/configs/ecovec.h | 6 ------ include/configs/edb93xx.h | 5 ----- include/configs/edison.h | 1 - include/configs/edminiv2.h | 3 --- include/configs/embestmx6boards.h | 3 --- include/configs/espt.h | 4 ---- include/configs/ethernut5.h | 4 ---- include/configs/exynos-common.h | 1 - include/configs/exynos7420-common.h | 1 - include/configs/flea3.h | 1 - include/configs/ge_bx50v3.h | 4 ---- include/configs/gw_ventana.h | 3 --- include/configs/h2200.h | 8 -------- include/configs/highbank.h | 4 ---- include/configs/hikey.h | 3 --- include/configs/hrcon.h | 3 --- include/configs/hsdk.h | 5 ----- include/configs/ids8313.h | 3 --- include/configs/imgtec_xilfpga.h | 1 - include/configs/imx27lite-common.h | 4 ---- include/configs/imx31_phycore.h | 9 --------- include/configs/integrator-common.h | 4 ---- include/configs/ipam390.h | 2 -- include/configs/kc1.h | 3 --- include/configs/km/keymile-common.h | 1 - include/configs/kzm9g.h | 3 --- include/configs/legoev3.h | 2 -- include/configs/ls1012a_common.h | 3 --- include/configs/ls1021aiot.h | 5 ----- include/configs/ls1021aqds.h | 5 ----- include/configs/ls1021atwr.h | 5 ----- include/configs/ls1043a_common.h | 3 --- include/configs/ls1043aqds.h | 3 --- include/configs/ls1046a_common.h | 3 --- include/configs/ls1046aqds.h | 3 --- include/configs/ls2080a_common.h | 3 --- include/configs/m53evk.h | 3 --- include/configs/malta.h | 5 ----- include/configs/mcx.h | 5 ----- include/configs/meesc.h | 3 --- include/configs/meson-gxbb-common.h | 5 ----- include/configs/microblaze-generic.h | 3 --- include/configs/mpc8308_p1m.h | 3 --- include/configs/mpr2.h | 4 ---- include/configs/ms7720se.h | 4 ---- include/configs/ms7722se.h | 3 --- include/configs/ms7750se.h | 3 --- include/configs/mv-common.h | 2 -- include/configs/mvebu_armada-37xx.h | 2 -- include/configs/mvebu_armada-8k.h | 2 -- include/configs/mx25pdk.h | 7 ------- include/configs/mx31ads.h | 5 ----- include/configs/mx31pdk.h | 5 ----- include/configs/mx35pdk.h | 3 --- include/configs/mx51evk.h | 3 --- include/configs/mx53ard.h | 6 ------ include/configs/mx53cx9020.h | 3 --- include/configs/mx53evk.h | 6 ------ include/configs/mx53loco.h | 3 --- include/configs/mx53smd.h | 6 ------ include/configs/mx6_common.h | 1 - include/configs/mx7_common.h | 1 - include/configs/mx7ulp_evk.h | 3 --- include/configs/nokia_rx51.h | 7 ------- include/configs/nsim.h | 5 ----- include/configs/omapl138_lcdk.h | 2 -- include/configs/ot1200.h | 3 --- include/configs/p1_p2_rdb_pc.h | 9 --------- include/configs/p1_twr.h | 9 --------- include/configs/pb1x00.h | 3 --- include/configs/pcm052.h | 5 ----- include/configs/pic32mzdask.h | 3 --- include/configs/picosam9g45.h | 4 ---- include/configs/platinum.h | 4 ---- include/configs/pm9261.h | 4 ---- include/configs/pm9263.h | 4 ---- include/configs/pm9g45.h | 4 ---- include/configs/poplar.h | 3 --- include/configs/qemu-mips.h | 7 ------- include/configs/qemu-mips64.h | 7 ------- include/configs/qemu-ppce500.h | 4 ---- include/configs/r0p7734.h | 9 --------- include/configs/r2dplus.h | 3 --- include/configs/r7780mp.h | 3 --- include/configs/rcar-gen2-common.h | 3 --- include/configs/rcar-gen3-common.h | 2 -- include/configs/rk3036_common.h | 1 - include/configs/rk3188_common.h | 1 - include/configs/rk322x_common.h | 1 - include/configs/rk3288_common.h | 1 - include/configs/rk3328_common.h | 1 - include/configs/rk3368_common.h | 1 - include/configs/rk3399_common.h | 1 - include/configs/rpi.h | 3 --- include/configs/rsk7203.h | 5 ----- include/configs/rsk7264.h | 2 -- include/configs/rsk7269.h | 2 -- include/configs/rv1108_common.h | 1 - include/configs/s32v234evb.h | 5 ----- include/configs/s5p_goni.h | 4 ---- include/configs/sandbox.h | 4 ---- include/configs/sbc8349.h | 12 ------------ include/configs/sbc8548.h | 8 -------- include/configs/sbc8641d.h | 10 ---------- include/configs/secomx6quq7.h | 4 ---- include/configs/sh7752evb.h | 3 --- include/configs/sh7753evb.h | 3 --- include/configs/sh7757lcr.h | 3 --- include/configs/sh7763rdp.h | 4 ---- include/configs/sh7785lcr.h | 3 --- include/configs/shmin.h | 4 ---- include/configs/siemens-am33x-common.h | 4 ---- include/configs/smartweb.h | 2 -- include/configs/smdkc100.h | 4 ---- include/configs/snapper9260.h | 4 ---- include/configs/snapper9g45.h | 4 ---- include/configs/sniper.h | 3 --- include/configs/socfpga_common.h | 2 -- include/configs/socrates.h | 10 ---------- include/configs/spear-common.h | 5 ----- include/configs/stih410-b2260.h | 1 - include/configs/stm32f429-discovery.h | 4 ---- include/configs/stm32f746-disco.h | 3 --- include/configs/strider.h | 3 --- include/configs/stv0991.h | 3 --- include/configs/sunxi-common.h | 4 ---- include/configs/t4qds.h | 8 -------- include/configs/tam3517-common.h | 5 ----- include/configs/tao3530.h | 8 -------- include/configs/taurus.h | 4 ---- include/configs/tb100.h | 5 ----- include/configs/tegra-common.h | 2 -- include/configs/thunderx_88xx.h | 3 --- include/configs/ti814x_evm.h | 9 --------- include/configs/ti_armv7_common.h | 3 --- include/configs/titanium.h | 4 ---- include/configs/tricorder.h | 7 ------- include/configs/ts4800.h | 5 ----- include/configs/udoo.h | 3 --- include/configs/uniphier.h | 3 --- include/configs/usb_a9263.h | 4 ---- include/configs/usbarmory.h | 3 --- include/configs/vct.h | 3 --- include/configs/ve8313.h | 2 -- include/configs/vexpress_aemv8a.h | 3 --- include/configs/vexpress_common.h | 5 ----- include/configs/vf610twr.h | 5 ----- include/configs/vme8349.h | 10 ---------- include/configs/woodburn_common.h | 5 ----- include/configs/work_92105.h | 3 --- include/configs/x600.h | 5 ----- include/configs/x86-common.h | 5 ----- include/configs/xilinx_zynqmp.h | 2 -- include/configs/xpedite517x.h | 4 ---- include/configs/xpedite520x.h | 4 ---- include/configs/xpedite537x.h | 4 ---- include/configs/xpedite550x.h | 4 ---- include/configs/xtfpga.h | 5 ----- include/configs/zipitz2.h | 5 +---- include/configs/zmx25.h | 4 ---- include/configs/zynq-common.h | 3 --- 273 files changed, 15 insertions(+), 1366 deletions(-)
Signature · 1 line
2.9.4
PATCH 1/8 include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE
CONFIG_SYS_CBSIZE contains the buffer size for input for the console. The vast majority of platforms define them to some reasonable value (256, 512 or 1024 bytes), and it is quite annoying to repeat this definition for all platforms while it isn't really HW-related.
Therefore, let's provide a sane fallback value in config_fallbacks.h, so that platforms can rely on it instead of having to explicitly define it.
We use 1024 when KGDB is enabled, and 256 otherwise, which is what the majority of the platforms are doing.
--- include/config_fallbacks.h | 9 +++++++++ 1 file changed, 9 insertions(+)
include/config_fallbacks.h +9 -0
@@ -71,6 +71,15 @@#define CONFIG_LIB_RAND #endif +/* Console I/O Buffer Size */ +#ifndef CONFIG_SYS_CBSIZE +#if defined(CONFIG_CMD_KGDB ) +#define CONFIG_SYS_CBSIZE 1024 +#else +#define CONFIG_SYS_CBSIZE 256 +#endif +#endif +#ifndef CONFIG_SYS_PBSIZE #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128)#endif
Signature · 1 line
2.9.4
PATCH 1/8 include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE
Quoted 5 lines · Thomas Petazzoni
CONFIG_SYS_CBSIZEcontains the buffer size for input for the console. The vast majority of platforms define them to some reasonable value (256, 512 or 1024 bytes), and it is quite annoying to repeat this definition for all platforms while it isn't really HW-related.
Quoted 8 lines
Therefore, let's provide a sane fallback value in
config_fallbacks.h, so that platforms can rely on it instead of having to explicitly define it.We use 1024 when KGDB is enabled, and 256 otherwise, which is what the majority of the platforms are doing.
Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/95c46af1/attachment.sig>
PATCH 1/8 include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE
In reply to Thomas PetazzoniQuoted 9 lines · Thomas Petazzoni
CONFIG_SYS_CBSIZEcontains the buffer size for input for the console. The vast majority of platforms define them to some reasonable value (256, 512 or 1024 bytes), and it is quite annoying to repeat this definition for all platforms while it isn't really HW-related.Therefore, let's provide a sane fallback value in
config_fallbacks.h, so that platforms can rely on it instead of having to explicitly define it.
Quoted 5 lines
We use 1024 when KGDB is enabled, and 256 otherwise, which is what the majority of the platforms are doing.
Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/50377516/attachment.sig>
PATCH 2/8 include/configs: remove CONFIG_SYS_CBSIZE when the default value is used
In reply to Thomas PetazzoniNow that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value.
--- include/configs/10m50_devboard.h | 1 - include/configs/3c120_devboard.h | 1 - include/configs/B4860QDS.h | 5 ----- include/configs/BSC9132QDS.h | 5 ----- include/configs/C29XPCIE.h | 1 - include/configs/M5208EVBE.h | 6 ------ include/configs/M52277EVB.h | 5 ----- include/configs/M5235EVB.h | 6 ------ include/configs/M5249EVB.h | 5 ----- include/configs/M5253DEMO.h | 5 ----- include/configs/M5253EVBE.h | 5 ----- include/configs/M5272C3.h | 6 ------ include/configs/M5275EVB.h | 5 ----- include/configs/M5282EVB.h | 5 ----- include/configs/M53017EVB.h | 6 ------ include/configs/M5329EVB.h | 6 ------ include/configs/M5373EVB.h | 6 ------ include/configs/M54418TWR.h | 5 ----- include/configs/M54451EVB.h | 5 ----- include/configs/M54455EVB.h | 5 ----- include/configs/M5475EVB.h | 6 ------ include/configs/M5485EVB.h | 6 ------ include/configs/MCR3000.h | 1 - include/configs/MPC8315ERDB.h | 6 ------ include/configs/MPC8323ERDB.h | 6 ------ include/configs/MPC832XEMDS.h | 6 ------ include/configs/MPC8349EMDS.h | 6 ------ include/configs/MPC8349ITX.h | 6 ------ include/configs/MPC837XEMDS.h | 6 ------ include/configs/MPC837XERDB.h | 6 ------ include/configs/MPC8536DS.h | 5 ----- include/configs/MPC8540ADS.h | 6 ------ include/configs/MPC8541CDS.h | 5 ----- include/configs/MPC8544DS.h | 5 ----- include/configs/MPC8548CDS.h | 5 ----- include/configs/MPC8555CDS.h | 5 ----- include/configs/MPC8560ADS.h | 6 ------ include/configs/MPC8568MDS.h | 5 ----- include/configs/MPC8572DS.h | 5 ----- include/configs/MPC8610HPCD.h | 6 ------ include/configs/MPC8641HPCN.h | 6 ------ include/configs/MigoR.h | 1 - include/configs/P1010RDB.h | 5 ----- include/configs/P1022DS.h | 5 ----- include/configs/P1023RDB.h | 5 ----- include/configs/P2041RDB.h | 5 ----- include/configs/T102xQDS.h | 5 ----- include/configs/T102xRDB.h | 5 ----- include/configs/T1040QDS.h | 5 ----- include/configs/T104xRDB.h | 5 ----- include/configs/T208xQDS.h | 5 ----- include/configs/T208xRDB.h | 5 ----- include/configs/T4240RDB.h | 5 ----- include/configs/TQM834x.h | 6 ------ include/configs/UCP1020.h | 5 ----- include/configs/adp-ae3xx.h | 1 - include/configs/adp-ag101p.h | 1 - include/configs/amcore.h | 6 ------ include/configs/ap121.h | 1 - include/configs/ap143.h | 1 - include/configs/ap325rxa.h | 2 -- include/configs/ap_sh4a_4a.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/aspeed-common.h | 1 - include/configs/astro_mcf5373l.h | 5 ----- include/configs/at91-sama5_common.h | 1 - include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/axs10x.h | 1 - include/configs/boston.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cobra5272.h | 5 ----- include/configs/colibri_pxa270.h | 1 - include/configs/controlcenterd.h | 5 ----- include/configs/corenet_ds.h | 5 ----- include/configs/corvus.h | 1 - include/configs/cyrus.h | 5 ----- include/configs/dbau1x00.h | 1 - include/configs/ecovec.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/h2200.h | 3 --- include/configs/hsdk.h | 1 - include/configs/imx31_phycore.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/kzm9g.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/malta.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/mx31ads.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mx35pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53smd.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/nsim.h | 1 - include/configs/p1_p2_rdb_pc.h | 5 ----- include/configs/p1_twr.h | 5 ----- include/configs/pb1x00.h | 1 - include/configs/pcm052.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qemu-ppce500.h | 1 - include/configs/r0p7734.h | 2 -- include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rcar-gen2-common.h | 1 - include/configs/rsk7203.h | 1 - include/configs/rsk7264.h | 1 - include/configs/rsk7269.h | 1 - include/configs/s32v234evb.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/sbc8349.h | 6 ------ include/configs/sbc8548.h | 5 ----- include/configs/sbc8641d.h | 6 ------ include/configs/sh7752evb.h | 1 - include/configs/sh7753evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/smdkc100.h | 1 - include/configs/snapper9260.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/socrates.h | 6 ------ include/configs/spear-common.h | 1 - include/configs/t4qds.h | 5 ----- include/configs/tao3530.h | 1 - include/configs/taurus.h | 1 - include/configs/tb100.h | 1 - include/configs/ts4800.h | 1 - include/configs/usb_a9263.h | 1 - include/configs/vf610twr.h | 1 - include/configs/vme8349.h | 6 ------ include/configs/woodburn_common.h | 1 - include/configs/x600.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zipitz2.h | 1 - include/configs/zmx25.h | 1 - include/configs/zynq-common.h | 1 - 160 files changed, 450 deletions(-)
include/configs/10m50_devboard.h +0 -1
@@ -78,7 +78,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
include/configs/3c120_devboard.h +0 -1
@@ -81,7 +81,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
include/configs/B4860QDS.h +0 -5
@@ -708,11 +708,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/BSC9132QDS.h +0 -5
@@ -515,11 +515,6 @@ combinations. this should be removed later#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/C29XPCIE.h +0 -1
@@ -433,7 +433,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/M5208EVBE.h +0 -6
@@ -80,12 +80,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */
include/configs/M52277EVB.h +0 -5
@@ -131,11 +131,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5235EVB.h +0 -6
@@ -95,12 +95,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_KGDB ) -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5249EVB.h +0 -5
@@ -41,11 +41,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5253DEMO.h +0 -5
@@ -94,11 +94,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5253EVBE.h +0 -5
@@ -64,11 +64,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5272C3.h +0 -6
@@ -98,12 +98,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5275EVB.h +0 -5
@@ -90,11 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if (CONFIG_CMD_KGDB ) -# define CONFIG_SYS_CBSIZE 1024 -#else -# define CONFIG_SYS_CBSIZE 256 -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/M5282EVB.h +0 -5
@@ -90,11 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M53017EVB.h +0 -6
@@ -97,12 +97,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */
include/configs/M5329EVB.h +0 -6
@@ -89,12 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5373EVB.h +0 -6
@@ -89,12 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M54418TWR.h +0 -5
@@ -178,11 +178,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/M54451EVB.h +0 -5
@@ -142,11 +142,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M54455EVB.h +0 -5
@@ -193,11 +193,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5475EVB.h +0 -6
@@ -126,12 +126,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5485EVB.h +0 -6
@@ -114,12 +114,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MCR3000.h +0 -1
@@ -70,7 +70,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8315ERDB.h +0 -6
@@ -454,12 +454,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC8323ERDB.h +0 -6
@@ -327,12 +327,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if (CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC832XEMDS.h +0 -6
@@ -411,12 +411,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC8349EMDS.h +0 -6
@@ -470,12 +470,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC8349ITX.h +0 -6
@@ -493,12 +493,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_LOADADDR 800000/* default location for tftp and bootm */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC837XEMDS.h +0 -6
@@ -482,12 +482,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC837XERDB.h +0 -6
@@ -496,12 +496,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC8536DS.h +0 -5
@@ -603,11 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/MPC8540ADS.h +0 -6
@@ -324,12 +324,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8541CDS.h +0 -5
@@ -347,11 +347,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8544DS.h +0 -5
@@ -361,11 +361,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8548CDS.h +0 -5
@@ -465,11 +465,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8555CDS.h +0 -5
@@ -345,11 +345,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8560ADS.h +0 -6
@@ -359,12 +359,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8568MDS.h +0 -5
@@ -360,11 +360,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8572DS.h +0 -5
@@ -559,11 +559,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8610HPCD.h +0 -6
@@ -434,12 +434,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8641HPCN.h +0 -6
@@ -591,12 +591,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MigoR.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */
include/configs/P1010RDB.h +0 -5
@@ -723,11 +723,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/P1022DS.h +0 -5
@@ -598,11 +598,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/P1023RDB.h +0 -5
@@ -253,11 +253,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/P2041RDB.h +0 -5
@@ -594,11 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT)+16)
include/configs/T102xQDS.h +0 -5
@@ -774,11 +774,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T102xRDB.h +0 -5
@@ -785,11 +785,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T1040QDS.h +0 -5
@@ -653,11 +653,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T104xRDB.h +0 -5
@@ -768,11 +768,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T208xQDS.h +0 -5
@@ -739,11 +739,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T208xRDB.h +0 -5
@@ -685,11 +685,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T4240RDB.h +0 -5
@@ -276,11 +276,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/TQM834x.h +0 -6
@@ -273,12 +273,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/UCP1020.h +0 -5
@@ -441,11 +441,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/adp-ae3xx.h +0 -1
@@ -100,7 +100,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \
include/configs/adp-ag101p.h +0 -1
@@ -106,7 +106,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \
include/configs/amcore.h +0 -6
@@ -33,12 +33,6 @@/* undef to save memory */ #undef CONFIG_SYS_LONGHELP -#if defined(CONFIG_CMD_KGDB ) -/* Console I/O buff. size */ -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif /* Print buffer size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT)+16)
include/configs/ap121.h +0 -1
@@ -43,7 +43,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/ap143.h +0 -1
@@ -47,7 +47,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/ap325rxa.h +0 -2
@@ -31,8 +31,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -/* Buffer size for input from the Console */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256/* max args accepted for monitor commands */
include/configs/ap_sh4a_4a.h +0 -2
@@ -31,8 +31,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -/* Buffer size for input from the Console */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256/* max args accepted for monitor commands */
include/configs/armadillo-800eva.h +0 -1
@@ -35,7 +35,6 @@#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/aspeed-common.h +0 -1
@@ -57,7 +57,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
include/configs/astro_mcf5373l.h +0 -5
@@ -178,11 +178,6 @@#define CONFIG_SYS_LONGHELP -#if (CONFIG_COMMANDS &CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/at91-sama5_common.h +0 -1
@@ -86,7 +86,6 @@#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/at91rm9200ek.h +0 -1
@@ -174,7 +174,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \
include/configs/at91sam9260ek.h +0 -1
@@ -159,7 +159,6 @@ "fatload mmc 0:1 0x22000000 uImage; bootm"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/at91sam9261ek.h +0 -1
@@ -136,7 +136,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/at91sam9263ek.h +0 -1
@@ -252,7 +252,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/at91sam9m10g45ek.h +0 -1
@@ -100,7 +100,6 @@ "bootz 0x72000000 - 0x71000000"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/at91sam9n12ek.h +0 -1
@@ -159,7 +159,6 @@#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/at91sam9rlek.h +0 -1
@@ -107,7 +107,6 @@ "bootz 0x22000000 - 0x21000000"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/at91sam9x5ek.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_ENV_SIZE 0x4000#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/axs10x.h +0 -1
@@ -81,7 +81,6 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE SZ_256#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/boston.h +0 -1
@@ -45,7 +45,6 @@* Console */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP
include/configs/cm_t35.h +0 -1
@@ -175,7 +175,6 @@#define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/cobra5272.h +0 -5
@@ -169,11 +169,6 @@ from which user programs will be started */#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/colibri_pxa270.h +0 -1
@@ -84,7 +84,6 @@#endif #undef CONFIG_SYS_LONGHELP/* Saves 10 KB */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16
include/configs/controlcenterd.h +0 -5
@@ -322,11 +322,6 @@#endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/corenet_ds.h +0 -5
@@ -603,11 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/corvus.h +0 -1
@@ -106,7 +106,6 @@"nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/cyrus.h +0 -5
@@ -430,11 +430,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/dbau1x00.h +0 -1
@@ -71,7 +71,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args*/
include/configs/ecovec.h +0 -2
@@ -64,8 +64,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -/* Buffer size for input from the Console */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256/* max args accepted for monitor commands */
include/configs/espt.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments
include/configs/ethernut5.h +0 -1
@@ -166,7 +166,6 @@"bootm 0x22000000" /* Misc. u-boot settings */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ + sizeof(CONFIG_SYS_PROMPT))
include/configs/h2200.h +0 -3
@@ -114,9 +114,6 @@/* Monitor Command Prompt */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/hsdk.h +0 -1
@@ -74,7 +74,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE SZ_256#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/imx31_phycore.h +0 -2
@@ -93,8 +93,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/integrator-common.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size*/ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size*/
include/configs/kzm9g.h +0 -1
@@ -40,7 +40,6 @@/* prompt */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/ls1021aiot.h +0 -1
@@ -246,7 +246,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/ls1021aqds.h +0 -1
@@ -512,7 +512,6 @@ unsigned long get_board_ddr_clk(void);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/ls1021atwr.h +0 -1
@@ -489,7 +489,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/malta.h +0 -1
@@ -52,7 +52,6 @@#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/mpr2.h +0 -1
@@ -24,7 +24,6 @@/* U-Boot internals */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */
include/configs/ms7720se.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */
include/configs/ms7722se.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */
include/configs/ms7750se.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/mx31ads.h +0 -1
@@ -95,7 +95,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/mx31pdk.h +0 -1
@@ -87,7 +87,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* max number of command args */ #define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */
include/configs/mx35pdk.h +0 -1
@@ -110,7 +110,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx51evk.h +0 -1
@@ -175,7 +175,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx53ard.h +0 -1
@@ -161,7 +161,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/mx53evk.h +0 -1
@@ -108,7 +108,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/mx53smd.h +0 -1
@@ -100,7 +100,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/nokia_rx51.h +0 -1
@@ -331,7 +331,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/nsim.h +0 -1
@@ -55,7 +55,6 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE SZ_256#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/p1_p2_rdb_pc.h +0 -5
@@ -825,11 +825,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/p1_twr.h +0 -5
@@ -397,11 +397,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/pb1x00.h +0 -1
@@ -45,7 +45,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args*/
include/configs/pcm052.h +0 -1
@@ -203,7 +203,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/picosam9g45.h +0 -1
@@ -111,7 +111,6 @@ "bootz 0x22000000 - 0x21000000"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/pm9261.h +0 -1
@@ -278,7 +278,6 @@#error "Undefined memory device"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/pm9263.h +0 -1
@@ -309,7 +309,6 @@#error "Undefined memory device"#endif -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/pm9g45.h +0 -1
@@ -119,7 +119,6 @@#define CONFIG_ENV_SIZE 0x20000/* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/qemu-mips.h +0 -2
@@ -70,8 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* max number of command args */
include/configs/qemu-mips64.h +0 -2
@@ -70,8 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* max number of command args */
include/configs/qemu-ppce500.h +0 -1
@@ -131,7 +131,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/r0p7734.h +0 -2
@@ -37,8 +37,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -/* Buffer size for input from the Console */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256/* max args accepted for monitor commands */
include/configs/r2dplus.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FE00000#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/r7780mp.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/rcar-gen2-common.h +0 -1
@@ -31,7 +31,6 @@/* console */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/rsk7203.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x0C7C0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */
include/configs/rsk7264.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }#define CONFIG_SYS_LONGHELP 1/* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */
include/configs/rsk7269.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Boot Argument Buffer Size */ #define CONFIG_SYS_PBSIZE 256/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/s32v234evb.h +0 -1
@@ -164,7 +164,6 @@#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/s5p_goni.h +0 -1
@@ -168,7 +168,6 @@ "dfu_alt_info=" CONFIG_DFU_ALT "\0"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */
include/configs/sbc8349.h +0 -6
@@ -406,12 +406,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/sbc8548.h +0 -5
@@ -515,11 +515,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/sbc8641d.h +0 -6
@@ -459,12 +459,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/sh7752evb.h +0 -1
@@ -24,7 +24,6 @@#define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/sh7753evb.h +0 -1
@@ -24,7 +24,6 @@#define SH7753EVB_SDRAM_SIZE (512 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/sh7757lcr.h +0 -1
@@ -25,7 +25,6 @@#define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024)#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/sh7763rdp.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments
include/configs/sh7785lcr.h +0 -1
@@ -40,7 +40,6 @@#endif #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512
include/configs/shmin.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_SYS_TEXT_BASE 0x8DFB0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */
include/configs/smdkc100.h +0 -1
@@ -128,7 +128,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */
include/configs/snapper9260.h +0 -1
@@ -124,7 +124,6 @@#define CONFIG_ENV_OVERWRITE /* Console settings */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/snapper9g45.h +0 -1
@@ -110,7 +110,6 @@"altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0" /* Console settings */ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/socrates.h +0 -6
@@ -281,12 +281,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buf Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/spear-common.h +0 -1
@@ -168,7 +168,6 @@#define CONFIG_SYS_MALLOC_LEN (1024*1024)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/t4qds.h +0 -5
@@ -245,11 +245,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/tao3530.h +0 -1
@@ -148,7 +148,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* turn on command-line edit/hist/auto */ #define CONFIG_CMDLINE_EDITING
include/configs/taurus.h +0 -1
@@ -143,7 +143,6 @@#define CONFIG_ENV_SIZE (SZ_128K)/* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/tb100.h +0 -1
@@ -73,7 +73,6 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/ts4800.h +0 -1
@@ -122,7 +122,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/usb_a9263.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/vf610twr.h +0 -1
@@ -189,7 +189,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/vme8349.h +0 -6
@@ -355,12 +355,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buf Size */
include/configs/woodburn_common.h +0 -1
@@ -102,7 +102,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */
include/configs/x600.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/xpedite517x.h +0 -1
@@ -485,7 +485,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/xpedite520x.h +0 -1
@@ -288,7 +288,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/xpedite537x.h +0 -1
@@ -338,7 +338,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/xpedite550x.h +0 -1
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/zipitz2.h +0 -1
@@ -80,7 +80,6 @@ unsigned char zipitz2_spi_read(void);#endif #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/zmx25.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) -#define CONFIG_SYS_CBSIZE 256#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
include/configs/zynq-common.h +0 -1
@@ -276,7 +276,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CLOCKS #define CONFIG_SYS_MAXARGS 32/* max number of command args */ -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16)
Signature · 1 line
2.9.4
PATCH 2/8 include/configs: remove CONFIG_SYS_CBSIZE when the default value is used
Quoted 5 lines · Thomas Petazzoni
Now that
include/config_fallbacks.hdefine a sane fallback forCONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/c55feeb5/attachment.sig>
PATCH 2/8 include/configs: remove CONFIG_SYS_CBSIZE when the default value is used
In reply to Thomas PetazzoniQuoted 6 lines · Thomas Petazzoni
Now that
include/config_fallbacks.hdefine a sane fallback forCONFIG_SYS_CBSIZE, we can drop the definition of this constant in all configurations that were using the default value.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/0cbddeb8/attachment.sig>
PATCH 3/8 include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE
In reply to Thomas PetazzoniMost of the platforms are using CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16 as their value for CONFIG_SYS_PBSIZE, so let's adopt this for the fallback value of CONFIG_SYS_PBSIZE.
This will allow us to drop an explicit definition of CONFIG_SYS_PBSIZE from a large number of platforms.
--- include/config_fallbacks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/config_fallbacks.h +1 -1
@@ -81,7 +81,7 @@#endif #ifndef CONFIG_SYS_PBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#endif #ifndef CONFIG_FIT_SIGNATURE
Signature · 1 line
2.9.4
PATCH 3/8 include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE
Quoted 8 lines · Thomas Petazzoni
Most of the platforms are using
CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+ 16 as their value forCONFIG_SYS_PBSIZE, so let's adopt this for the fallback value ofCONFIG_SYS_PBSIZE.This will allow us to drop an explicit definition of
CONFIG_SYS_PBSIZEfrom a large number of platforms.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/5ce0d6c3/attachment.sig>
PATCH 3/8 include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE
In reply to Thomas PetazzoniQuoted 9 lines · Thomas Petazzoni
Most of the platforms are using
CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+ 16 as their value forCONFIG_SYS_PBSIZE, so let's adopt this for the fallback value ofCONFIG_SYS_PBSIZE.This will allow us to drop an explicit definition of
CONFIG_SYS_PBSIZEfrom a large number of platforms.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/4288adb1/attachment.sig>
PATCH 4/8 include/configs: drop default definitions of CONFIG_SYS_PBSIZE
In reply to Thomas PetazzoniNow that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files.
--- include/configs/10m50_devboard.h | 3 --- include/configs/3c120_devboard.h | 3 --- include/configs/B4860QDS.h | 1 - include/configs/BSC9131RDB.h | 2 -- include/configs/BSC9132QDS.h | 2 -- include/configs/C29XPCIE.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 1 - include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 1 - include/configs/M5253DEMO.h | 1 - include/configs/M5253EVBE.h | 1 - include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 3 --- include/configs/M54451EVB.h | 1 - include/configs/M54455EVB.h | 1 - include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MCR3000.h | 1 - include/configs/MPC8308RDB.h | 2 -- include/configs/MPC8313ERDB.h | 3 --- include/configs/MPC8315ERDB.h | 2 -- include/configs/MPC8323ERDB.h | 2 -- include/configs/MPC832XEMDS.h | 2 -- include/configs/MPC8349EMDS.h | 2 -- include/configs/MPC8349ITX.h | 2 -- include/configs/MPC837XEMDS.h | 2 -- include/configs/MPC837XERDB.h | 2 -- include/configs/MPC8536DS.h | 2 -- include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 2 -- include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/P1010RDB.h | 2 -- include/configs/P1022DS.h | 2 -- include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 3 --- include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/TQM834x.h | 2 -- include/configs/UCP1020.h | 2 -- include/configs/adp-ae3xx.h | 4 ---- include/configs/adp-ag101p.h | 4 ---- include/configs/advantech_dms-ba16.h | 2 -- include/configs/am3517_crane.h | 3 --- include/configs/am3517_evm.h | 3 --- include/configs/amcore.h | 3 --- include/configs/ap121.h | 2 -- include/configs/ap143.h | 2 -- include/configs/apalis-tk1.h | 3 --- include/configs/apalis_t30.h | 3 --- include/configs/apf27.h | 3 --- include/configs/aristainetos-common.h | 3 --- include/configs/aspeed-common.h | 3 --- include/configs/astro_mcf5373l.h | 1 - include/configs/at91rm9200ek.h | 3 --- include/configs/axs10x.h | 2 -- include/configs/bcm23550_w1d.h | 2 -- include/configs/bcm28155_ap.h | 2 -- include/configs/bcm_ep_board.h | 2 -- include/configs/bcm_northstar2.h | 2 -- include/configs/boston.h | 2 -- include/configs/bur_cfg_common.h | 3 --- include/configs/calimain.h | 1 - include/configs/cm_fx6.h | 4 ---- include/configs/cm_t35.h | 3 --- include/configs/cm_t3517.h | 3 --- include/configs/cobra5272.h | 1 - include/configs/colibri_pxa270.h | 2 -- include/configs/colibri_t20.h | 3 --- include/configs/colibri_t30.h | 3 --- include/configs/colibri_vf.h | 2 -- include/configs/controlcenterd.h | 2 -- include/configs/corenet_ds.h | 1 - include/configs/corvus.h | 2 -- include/configs/cyrus.h | 1 - include/configs/da850evm.h | 1 - include/configs/dbau1x00.h | 1 - include/configs/devkit3250.h | 2 -- include/configs/dragonboard410c.h | 2 -- include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/edb93xx.h | 2 -- include/configs/edison.h | 1 - include/configs/edminiv2.h | 2 -- include/configs/embestmx6boards.h | 3 --- include/configs/ethernut5.h | 2 -- include/configs/ge_bx50v3.h | 2 -- include/configs/gw_ventana.h | 3 --- include/configs/h2200.h | 4 ---- include/configs/highbank.h | 3 --- include/configs/hikey.h | 2 -- include/configs/hrcon.h | 2 -- include/configs/hsdk.h | 2 -- include/configs/ids8313.h | 2 -- include/configs/imx27lite-common.h | 3 --- include/configs/imx31_phycore.h | 3 --- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/kc1.h | 2 -- include/configs/km/keymile-common.h | 1 - include/configs/legoev3.h | 1 - include/configs/ls1012a_common.h | 2 -- include/configs/ls1021aiot.h | 2 -- include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atwr.h | 2 -- include/configs/ls1043a_common.h | 2 -- include/configs/ls1043aqds.h | 2 -- include/configs/ls1046a_common.h | 2 -- include/configs/ls1046aqds.h | 2 -- include/configs/ls2080a_common.h | 2 -- include/configs/m53evk.h | 3 --- include/configs/malta.h | 2 -- include/configs/mcx.h | 3 --- include/configs/meesc.h | 2 -- include/configs/meson-gxbb-common.h | 4 ---- include/configs/microblaze-generic.h | 3 --- include/configs/mpc8308_p1m.h | 2 -- include/configs/mpr2.h | 1 - include/configs/mv-common.h | 2 -- include/configs/mvebu_armada-37xx.h | 2 -- include/configs/mvebu_armada-8k.h | 2 -- include/configs/mx25pdk.h | 3 --- include/configs/mx31ads.h | 2 -- include/configs/mx53ard.h | 2 -- include/configs/mx53evk.h | 2 -- include/configs/mx53smd.h | 2 -- include/configs/mx7ulp_evk.h | 2 -- include/configs/nokia_rx51.h | 3 --- include/configs/nsim.h | 2 -- include/configs/omapl138_lcdk.h | 1 - include/configs/ot1200.h | 3 --- include/configs/p1_p2_rdb_pc.h | 2 -- include/configs/p1_twr.h | 2 -- include/configs/pb1x00.h | 1 - include/configs/pcm052.h | 2 -- include/configs/pic32mzdask.h | 2 -- include/configs/picosam9g45.h | 2 -- include/configs/platinum.h | 4 ---- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/pm9g45.h | 2 -- include/configs/poplar.h | 2 -- include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qemu-ppce500.h | 1 - include/configs/r0p7734.h | 3 --- include/configs/rcar-gen3-common.h | 2 -- include/configs/rpi.h | 2 -- include/configs/rsk7203.h | 1 - include/configs/s32v234evb.h | 2 -- include/configs/sandbox.h | 2 -- include/configs/sbc8349.h | 2 -- include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/secomx6quq7.h | 4 ---- include/configs/siemens-am33x-common.h | 4 ---- include/configs/smartweb.h | 2 -- include/configs/snapper9260.h | 2 -- include/configs/snapper9g45.h | 2 -- include/configs/sniper.h | 2 -- include/configs/socfpga_common.h | 2 -- include/configs/socrates.h | 1 - include/configs/spear-common.h | 2 -- include/configs/stm32f429-discovery.h | 2 -- include/configs/stm32f746-disco.h | 2 -- include/configs/strider.h | 2 -- include/configs/stv0991.h | 2 -- include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 3 --- include/configs/tao3530.h | 3 --- include/configs/taurus.h | 2 -- include/configs/tb100.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/thunderx_88xx.h | 2 -- include/configs/ti814x_evm.h | 4 ---- include/configs/ti_armv7_common.h | 3 --- include/configs/titanium.h | 4 ---- include/configs/tricorder.h | 3 --- include/configs/ts4800.h | 2 -- include/configs/udoo.h | 3 --- include/configs/uniphier.h | 2 -- include/configs/usb_a9263.h | 2 -- include/configs/usbarmory.h | 1 - include/configs/vct.h | 2 -- include/configs/ve8313.h | 1 - include/configs/vexpress_aemv8a.h | 2 -- include/configs/vexpress_common.h | 3 --- include/configs/vf610twr.h | 2 -- include/configs/vme8349.h | 1 - include/configs/woodburn_common.h | 2 -- include/configs/work_92105.h | 2 -- include/configs/x600.h | 2 -- include/configs/x86-common.h | 3 --- include/configs/xilinx_zynqmp.h | 2 -- include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 3 --- include/configs/zipitz2.h | 2 +- include/configs/zmx25.h | 2 -- include/configs/zynq-common.h | 2 -- 220 files changed, 1 insertion(+), 433 deletions(-)
include/configs/10m50_devboard.h +0 -3
@@ -80,9 +80,6 @@#define CONFIG_SYS_LONGHELP /* Provide extended help */ #define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16)/* Print buf size */ #define CONFIG_SYS_LOAD_ADDR 0xcc000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
include/configs/3c120_devboard.h +0 -3
@@ -83,9 +83,6 @@#define CONFIG_SYS_LONGHELP /* Provide extended help */ #define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16)/* Print buf size */ #define CONFIG_SYS_LOAD_ADDR 0xd4000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
include/configs/B4860QDS.h +0 -1
@@ -708,7 +708,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/BSC9131RDB.h +0 -2
@@ -297,8 +297,6 @@ extern unsigned long get_sdram_size(void);#else #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/BSC9132QDS.h +0 -2
@@ -515,8 +515,6 @@ combinations. this should be removed later#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/C29XPCIE.h +0 -2
@@ -433,8 +433,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5208EVBE.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M52277EVB.h +0 -1
@@ -131,7 +131,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5235EVB.h +0 -1
@@ -95,7 +95,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)
include/configs/M5249EVB.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5253DEMO.h +0 -1
@@ -94,7 +94,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5253EVBE.h +0 -1
@@ -64,7 +64,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5272C3.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x20000
include/configs/M5275EVB.h +0 -1
@@ -90,7 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/M5282EVB.h +0 -1
@@ -90,7 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M53017EVB.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5329EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5373EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M54418TWR.h +0 -3
@@ -178,9 +178,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/M54451EVB.h +0 -1
@@ -142,7 +142,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M54455EVB.h +0 -1
@@ -193,7 +193,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/M5475EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/M5485EVB.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/MCR3000.h +0 -1
@@ -70,7 +70,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8308RDB.h +0 -2
@@ -426,8 +426,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8313ERDB.h +0 -3
@@ -474,9 +474,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8315ERDB.h +0 -2
@@ -454,8 +454,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8323ERDB.h +0 -2
@@ -327,8 +327,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC832XEMDS.h +0 -2
@@ -411,8 +411,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8349EMDS.h +0 -2
@@ -470,8 +470,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8349ITX.h +0 -2
@@ -493,8 +493,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_LOADADDR 800000/* default location for tftp and bootm */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC837XEMDS.h +0 -2
@@ -482,8 +482,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC837XERDB.h +0 -2
@@ -496,8 +496,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8536DS.h +0 -2
@@ -603,8 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8540ADS.h +0 -1
@@ -324,7 +324,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8541CDS.h +0 -1
@@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8544DS.h +0 -1
@@ -361,7 +361,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8548CDS.h +0 -1
@@ -465,7 +465,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8555CDS.h +0 -1
@@ -345,7 +345,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8560ADS.h +0 -1
@@ -359,7 +359,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8568MDS.h +0 -1
@@ -360,7 +360,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8569MDS.h +0 -2
@@ -463,8 +463,6 @@ extern unsigned long get_clock_freq(void);#else #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8572DS.h +0 -1
@@ -559,7 +559,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8610HPCD.h +0 -1
@@ -434,7 +434,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8641HPCN.h +0 -1
@@ -591,7 +591,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/P1010RDB.h +0 -2
@@ -723,8 +723,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/P1022DS.h +0 -2
@@ -598,8 +598,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/P1023RDB.h +0 -2
@@ -253,8 +253,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/P2041RDB.h +0 -3
@@ -594,9 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/T102xQDS.h +0 -1
@@ -774,7 +774,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T102xRDB.h +0 -1
@@ -785,7 +785,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T1040QDS.h +0 -1
@@ -653,7 +653,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T104xRDB.h +0 -1
@@ -768,7 +768,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T208xQDS.h +0 -1
@@ -739,7 +739,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T208xRDB.h +0 -1
@@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/T4240RDB.h +0 -1
@@ -276,7 +276,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/TQM834x.h +0 -2
@@ -273,8 +273,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/UCP1020.h +0 -2
@@ -441,8 +441,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */
include/configs/adp-ae3xx.h +0 -4
@@ -101,10 +101,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ #define CONFIG_SYS_MAXARGS 16
include/configs/adp-ag101p.h +0 -4
@@ -107,10 +107,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ #define CONFIG_SYS_MAXARGS 16
include/configs/advantech_dms-ba16.h +0 -2
@@ -211,8 +211,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x10000000
include/configs/am3517_crane.h +0 -3
@@ -167,9 +167,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 32/* max number of command */ /* args */ /* Boot Argument Buffer Size */
include/configs/am3517_evm.h +0 -3
@@ -235,9 +235,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/amcore.h +0 -3
@@ -33,9 +33,6 @@/* undef to save memory */ #undef CONFIG_SYS_LONGHELP -/* Print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 16/* Boot argument buffer size */
include/configs/ap121.h +0 -2
@@ -44,8 +44,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/ap143.h +0 -2
@@ -48,8 +48,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/apalis-tk1.h +0 -3
@@ -145,9 +145,6 @@#undef CONFIG_SYS_BARGSIZE#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Increase print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Increase maximum number of arguments */ #undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32
include/configs/apalis_t30.h +0 -3
@@ -52,9 +52,6 @@#undef CONFIG_SYS_BARGSIZE#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Increase print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Increase maximum number of arguments */ #undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32
include/configs/apf27.h +0 -3
@@ -103,9 +103,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 2048/* console I/O buffer */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Print buffer size */ #define CONFIG_SYS_MAXARGS 16/* max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */
include/configs/aristainetos-common.h +0 -3
@@ -135,9 +135,6 @@#define CONFIG_ARP_TIMEOUT 200UL -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
include/configs/aspeed-common.h +0 -3
@@ -58,9 +58,6 @@*/ #define CONFIG_SYS_LONGHELP -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/astro_mcf5373l.h +0 -1
@@ -178,7 +178,6 @@#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/at91rm9200ek.h +0 -3
@@ -175,9 +175,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 16/* max number of command args */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* * Size of malloc() pool
include/configs/axs10x.h +0 -2
@@ -82,8 +82,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* * Misc utility configuration
include/configs/bcm23550_w1d.h +0 -2
@@ -87,8 +87,6 @@/* console configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* Printbuffer size */ #define CONFIG_SYS_MAXARGS 64#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/bcm28155_ap.h +0 -2
@@ -86,8 +86,6 @@/* console configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* Printbuffer size */ #define CONFIG_SYS_MAXARGS 64#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/bcm_ep_board.h +0 -2
@@ -49,8 +49,6 @@/* console configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* Printbuffer size */ #define CONFIG_SYS_MAXARGS 64#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/bcm_northstar2.h +0 -2
@@ -41,8 +41,6 @@/* console configuration */ #define CONFIG_SYS_CBSIZE SZ_1K -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 64#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/boston.h +0 -2
@@ -45,8 +45,6 @@* Console */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP /*
include/configs/bur_cfg_common.h +0 -3
@@ -49,9 +49,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16)/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/calimain.h +0 -1
@@ -187,7 +187,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/cm_fx6.h +0 -4
@@ -40,10 +40,6 @@#define CONFIG_MXC_UART_BASE UART4_BASE#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} -/* Shell */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* SPI flash */ #define CONFIG_SF_DEFAULT_BUS 0#define CONFIG_SF_DEFAULT_CS 0
include/configs/cm_t35.h +0 -3
@@ -175,9 +175,6 @@#define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/cm_t3517.h +0 -3
@@ -180,9 +180,6 @@#define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 32/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/cobra5272.h +0 -1
@@ -169,7 +169,6 @@ from which user programs will be started */#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/colibri_pxa270.h +0 -2
@@ -84,8 +84,6 @@#endif #undef CONFIG_SYS_LONGHELP/* Saves 10 KB */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_DEVICE_NULLDEV 1
include/configs/colibri_t20.h +0 -3
@@ -70,9 +70,6 @@#undef CONFIG_SYS_BARGSIZE#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Increase print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Increase maximum number of arguments */ #undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32
include/configs/colibri_t30.h +0 -3
@@ -51,9 +51,6 @@#undef CONFIG_SYS_BARGSIZE#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Increase print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Increase maximum number of arguments */ #undef CONFIG_SYS_MAXARGS#define CONFIG_SYS_MAXARGS 32
include/configs/colibri_vf.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/controlcenterd.h +0 -2
@@ -322,8 +322,6 @@#endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/corenet_ds.h +0 -1
@@ -603,7 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/corvus.h +0 -2
@@ -107,8 +107,6 @@ "bootm 0x70000000"#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/cyrus.h +0 -1
@@ -430,7 +430,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/da850evm.h +0 -1
@@ -242,7 +242,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/dbau1x00.h +0 -1
@@ -71,7 +71,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 128*1024
include/configs/devkit3250.h +0 -2
@@ -120,8 +120,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/dragonboard410c.h +0 -2
@@ -114,8 +114,6 @@ REFLASH(dragonboard/u-boot.img, 8)\/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MAXARGS 64/* max command args */
include/configs/ea20.h +0 -1
@@ -105,7 +105,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/eb_cpu5282.h +0 -1
@@ -62,7 +62,6 @@#define CONFIG_SYS_LONGHELP 1#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/edb93xx.h +0 -2
@@ -78,8 +78,6 @@#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ -/* Print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Boot argument buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MAXARGS 16/* Max number of command args */
include/configs/edison.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 128#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/edminiv2.h +0 -2
@@ -113,8 +113,6 @@#define CONFIG_SETUP_MEMORY_TAGS 1/* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buff */ /* * Commands configuration */
include/configs/embestmx6boards.h +0 -3
@@ -63,9 +63,6 @@#define CONFIG_ARP_TIMEOUT 200UL -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
include/configs/ethernut5.h +0 -2
@@ -167,8 +167,6 @@/* Misc. u-boot settings */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ - + sizeof(CONFIG_SYS_PROMPT))#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/ge_bx50v3.h +0 -2
@@ -242,8 +242,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x10000000
include/configs/gw_ventana.h +0 -3
@@ -171,9 +171,6 @@#define CONFIG_HWCONFIG #define CONFIG_PREBOOT -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Memory configuration */ #define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000
include/configs/h2200.h +0 -4
@@ -114,10 +114,6 @@/* Monitor Command Prompt */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_USB_DEV_PULLUP_GPIO 33/* USB VBUS GPIO 3 */
include/configs/highbank.h +0 -3
@@ -56,9 +56,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_LOAD_ADDR 0x800000#define CONFIG_SYS_64BIT_LBA
include/configs/hikey.h +0 -2
@@ -107,8 +107,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/hrcon.h +0 -2
@@ -522,8 +522,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/hsdk.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* * Misc utility configuration
include/configs/ids8313.h +0 -2
@@ -451,8 +451,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/imx27lite-common.h +0 -3
@@ -141,9 +141,6 @@* U-Boot general configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/imx31_phycore.h +0 -3
@@ -93,9 +93,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */
include/configs/integrator-common.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)/* Size of malloc() pool */
include/configs/ipam390.h +0 -1
@@ -197,7 +197,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/kc1.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ - + 16)/* * Serial
include/configs/km/keymile-common.h +0 -1
@@ -21,7 +21,6 @@#else #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
include/configs/legoev3.h +0 -1
@@ -143,7 +143,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/ls1012a_common.h +0 -2
@@ -107,8 +107,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1
include/configs/ls1021aiot.h +0 -2
@@ -246,8 +246,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/ls1021aqds.h +0 -2
@@ -512,8 +512,6 @@ unsigned long get_board_ddr_clk(void);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/ls1021atwr.h +0 -2
@@ -489,8 +489,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/ls1043a_common.h +0 -2
@@ -330,8 +330,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP
include/configs/ls1043aqds.h +0 -2
@@ -383,8 +383,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000
include/configs/ls1046a_common.h +0 -2
@@ -268,8 +268,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP
include/configs/ls1046aqds.h +0 -2
@@ -420,8 +420,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000
include/configs/ls2080a_common.h +0 -2
@@ -216,8 +216,6 @@ unsigned long long get_qixis_addr(void);/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1
include/configs/m53evk.h +0 -3
@@ -46,9 +46,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Print buffer size */ #define CONFIG_SYS_MAXARGS 32/* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */
include/configs/malta.h +0 -2
@@ -52,8 +52,6 @@#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_AUTO_COMPLETE
include/configs/mcx.h +0 -3
@@ -213,9 +213,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command */ /* args */ /* Boot Argument Buffer Size */
include/configs/meesc.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/meson-gxbb-common.h +0 -4
@@ -25,10 +25,6 @@#define GICD_BASE 0xc4301000#define GICC_BASE 0xc4302000 -/* Monitor Command Prompt */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/microblaze-generic.h +0 -3
@@ -182,9 +182,6 @@/* size of console buffer */ #define CONFIG_SYS_CBSIZE 512 -/* print buffer size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 15#define CONFIG_SYS_LONGHELP
include/configs/mpc8308_p1m.h +0 -2
@@ -393,8 +393,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/mpr2.h +0 -1
@@ -24,7 +24,6 @@/* U-Boot internals */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/mv-common.h +0 -2
@@ -68,8 +68,6 @@#define CONFIG_SETUP_MEMORY_TAGS 1/* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buff */ /* * Size of malloc() pool
include/configs/mvebu_armada-37xx.h +0 -2
@@ -35,8 +35,6 @@#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buff */ /* * Size of malloc() pool
include/configs/mvebu_armada-8k.h +0 -2
@@ -37,8 +37,6 @@#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buff */ /* * Size of malloc() pool
include/configs/mx25pdk.h +0 -3
@@ -63,9 +63,6 @@/* U-Boot general configuration */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/mx31ads.h +0 -2
@@ -95,8 +95,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx53ard.h +0 -2
@@ -162,8 +162,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx53evk.h +0 -2
@@ -109,8 +109,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx53smd.h +0 -2
@@ -101,8 +101,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/mx7ulp_evk.h +0 -2
@@ -78,10 +78,8 @@#define CONFIG_SYS_PROMPT "=> "#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 256#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_CMDLINE_EDITING
include/configs/nokia_rx51.h +0 -3
@@ -331,9 +331,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/nsim.h +0 -2
@@ -56,7 +56,5 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#endif /* _CONFIG_NSIM_H_ */
include/configs/omapl138_lcdk.h +0 -1
@@ -236,7 +236,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "zImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
include/configs/ot1200.h +0 -3
@@ -95,9 +95,6 @@/* Thermal support */ #define CONFIG_IMX_THERMAL -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/p1_p2_rdb_pc.h +0 -2
@@ -825,8 +825,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/p1_twr.h +0 -2
@@ -397,8 +397,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/pb1x00.h +0 -1
@@ -45,7 +45,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 128*1024
include/configs/pcm052.h +0 -2
@@ -203,8 +203,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/pic32mzdask.h +0 -2
@@ -59,8 +59,6 @@*/ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args*/ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/picosam9g45.h +0 -2
@@ -112,8 +112,6 @@#endif #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/platinum.h +0 -4
@@ -112,10 +112,6 @@/* Miscellaneous configurable options */ #define CONFIG_PREBOOT -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* MTD/UBI/UBIFS config */ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS
include/configs/pm9261.h +0 -2
@@ -279,8 +279,6 @@#endif #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/pm9263.h +0 -2
@@ -310,8 +310,6 @@#endif #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/pm9g45.h +0 -2
@@ -120,8 +120,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/poplar.h +0 -2
@@ -77,8 +77,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* _POPLAR_H_ */
include/configs/qemu-mips.h +0 -2
@@ -70,8 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 16
include/configs/qemu-mips64.h +0 -2
@@ -70,8 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 16
include/configs/qemu-ppce500.h +0 -1
@@ -131,7 +131,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/r0p7734.h +0 -3
@@ -36,9 +36,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256/* max args accepted for monitor commands */ #define CONFIG_SYS_MAXARGS 16/* Buffer size for Boot Arguments passed to kernel */
include/configs/rcar-gen3-common.h +0 -2
@@ -39,8 +39,6 @@/* console */ #define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MAXARGS 64
include/configs/rpi.h +0 -2
@@ -87,8 +87,6 @@/* Console configuration */ #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* Environment */ #define CONFIG_ENV_SIZE SZ_16K
include/configs/rsk7203.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x0C7C0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512
include/configs/s32v234evb.h +0 -2
@@ -164,8 +164,6 @@#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
include/configs/sandbox.h +0 -2
@@ -40,8 +40,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_DISPLAY_BOARDINFO_LATE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* turn on command-line edit/c/auto */
include/configs/sbc8349.h +0 -2
@@ -406,8 +406,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/sbc8548.h +0 -1
@@ -515,7 +515,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/sbc8641d.h +0 -1
@@ -459,7 +459,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/secomx6quq7.h +0 -4
@@ -63,10 +63,6 @@"stdout=serial\0" \ "stderr=serial\0" -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_HZ 1000/* Physical Memory Map */
include/configs/siemens-am33x-common.h +0 -4
@@ -54,10 +54,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/smartweb.h +0 -2
@@ -166,8 +166,6 @@/* General Boot Parameter */ #define CONFIG_BOOTCOMMAND "run flashboot"#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/snapper9260.h +0 -2
@@ -125,8 +125,6 @@/* Console settings */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/snapper9g45.h +0 -2
@@ -111,8 +111,6 @@/* Console settings */ #define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/sniper.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ - + 16)/* * Serial
include/configs/socfpga_common.h +0 -2
@@ -54,8 +54,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print buffer size */ #define CONFIG_SYS_MAXARGS 32/* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/socrates.h +0 -1
@@ -281,7 +281,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buf Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/spear-common.h +0 -2
@@ -168,8 +168,6 @@#define CONFIG_SYS_MALLOC_LEN (1024*1024)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000
include/configs/stm32f429-discovery.h +0 -2
@@ -58,8 +58,6 @@#define CONFIG_REVISION_TAG #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16
include/configs/stm32f746-disco.h +0 -2
@@ -47,8 +47,6 @@#define CONFIG_REVISION_TAG #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
include/configs/strider.h +0 -2
@@ -556,8 +556,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/stv0991.h +0 -2
@@ -31,8 +31,6 @@/* user interface */ #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16)/* MISC */ #define CONFIG_SYS_LOAD_ADDR 0x00000000
include/configs/t4qds.h +0 -1
@@ -245,7 +245,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/tam3517-common.h +0 -3
@@ -95,9 +95,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 32/* max number of command */ /* args */ /* Boot Argument Buffer Size */
include/configs/tao3530.h +0 -3
@@ -153,9 +153,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/taurus.h +0 -2
@@ -144,8 +144,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/tb100.h +0 -2
@@ -74,7 +74,5 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#endif /* _CONFIG_TB100_H_ */
include/configs/tegra-common.h +0 -2
@@ -59,8 +59,6 @@*/ #define CONFIG_SYS_CBSIZE (1024 * 2)/* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 64/* max number of command args */ /* Boot Argument Buffer Size */
include/configs/thunderx_88xx.h +0 -2
@@ -74,8 +74,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1
include/configs/ti814x_evm.h +0 -4
@@ -93,10 +93,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/ti_armv7_common.h +0 -3
@@ -126,9 +126,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16)/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/titanium.h +0 -4
@@ -128,10 +128,6 @@#define CONFIG_BOOTCOMMAND "run nand_ubifs" -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/tricorder.h +0 -3
@@ -211,9 +211,6 @@#define CONFIG_CMDLINE_EDITING /* enable cmdline history */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */
include/configs/ts4800.h +0 -2
@@ -122,8 +122,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/udoo.h +0 -3
@@ -146,9 +146,6 @@"fi; " \"else run netboot; fi" -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* Physical Memory Map */#define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/uniphier.h +0 -2
@@ -62,8 +62,6 @@#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/usb_a9263.h +0 -2
@@ -99,8 +99,6 @@ "mtdparts=" MTDPARTS_DEFAULT "\0" \#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_LONGHELP
include/configs/usbarmory.h +0 -1
@@ -25,7 +25,6 @@/* U-Boot general configurations */ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/vct.h +0 -2
@@ -119,8 +119,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_CMDLINE_EDITING /* add command line history */
include/configs/ve8313.h +0 -1
@@ -323,7 +323,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot arg Buffer size */
include/configs/vexpress_aemv8a.h +0 -2
@@ -230,8 +230,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/vexpress_common.h +0 -3
@@ -273,9 +273,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MAXARGS 16/* max command args */
include/configs/vf610twr.h +0 -2
@@ -189,8 +189,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/vme8349.h +0 -1
@@ -355,7 +355,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buf Size */
include/configs/woodburn_common.h +0 -2
@@ -102,8 +102,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/work_92105.h +0 -2
@@ -87,8 +87,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/x600.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000
include/configs/x86-common.h +0 -3
@@ -79,9 +79,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/xilinx_zynqmp.h +0 -2
@@ -135,8 +135,6 @@/* Monitor Command Prompt */ /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/xpedite517x.h +0 -1
@@ -485,7 +485,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* Command-line editing */
include/configs/xpedite520x.h +0 -1
@@ -288,7 +288,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */
include/configs/xpedite537x.h +0 -1
@@ -338,7 +338,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */
include/configs/xpedite550x.h +0 -1
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */
include/configs/xtfpga.h +0 -3
@@ -115,9 +115,6 @@#define CONFIG_BOOTFILE "uImage"/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 -/* Prt buf */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)/* max number of command args */ #define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */
include/configs/zipitz2.h +1 -1
@@ -80,7 +80,7 @@ unsigned char zipitz2_spi_read(void);#endif #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1
include/configs/zmx25.h +0 -2
@@ -118,8 +118,6 @@#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/zynq-common.h +0 -2
@@ -276,8 +276,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CLOCKS #define CONFIG_SYS_MAXARGS 32/* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16)#ifndef CONFIG_NR_DRAM_BANKS # define CONFIG_NR_DRAM_BANKS 1
Signature · 1 line
2.9.4
PATCH 4/8 include/configs: drop default definitions of CONFIG_SYS_PBSIZE
Quoted 5 lines · Thomas Petazzoni
Now that the fallback value of
CONFIG_SYS_PBSIZEininclude/config_fallbacks.hhas been adjusted, remove its definition from a large number of board configuration files.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/a7ede7ae/attachment.sig>
PATCH 4/8 include/configs: drop default definitions of CONFIG_SYS_PBSIZE
In reply to Thomas PetazzoniQuoted 6 lines · Thomas Petazzoni
Now that the fallback value of
CONFIG_SYS_PBSIZEininclude/config_fallbacks.hhas been adjusted, remove its definition from a large number of board configuration files.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/fde0636b/attachment.sig>
PATCH 5/8 include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS
In reply to Thomas PetazzoniCONFIG_SYS_MAXARGS contains the maximum number of arguments accepted by U-Boot commands. Since the vast majority of the platforms define it to 16, it makes sense to have a default definition to 16, which will allow to remove this definition from a significant number of platforms.
It will allow to remove the default definition from 216 platform .h files, leaving only 56 platforms with non-default values (15, 24, 32, 48, 64, 96, 128 or 256).
--- include/config_fallbacks.h | 4 ++++ 1 file changed, 4 insertions(+)
include/config_fallbacks.h +4 -0
@@ -84,6 +84,10 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#endif +#ifndef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 16 +#endif +#ifndef CONFIG_FIT_SIGNATURE #define CONFIG_IMAGE_FORMAT_LEGACY #endif
Signature · 1 line
2.9.4
PATCH 5/8 include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS
Quoted 11 lines · Thomas Petazzoni
CONFIG_SYS_MAXARGScontains the maximum number of arguments accepted by U-Boot commands. Since the vast majority of the platforms define it to 16, it makes sense to have a default definition to 16, which will allow to remove this definition from a significant number of platforms.It will allow to remove the default definition from 216 platform .h files, leaving only 56 platforms with non-default values (15, 24, 32, 48, 64, 96, 128 or 256).
Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/a7e5a3f7/attachment.sig>
PATCH 5/8 include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS
In reply to Thomas PetazzoniQuoted 6 lines · Thomas Petazzoni
CONFIG_SYS_MAXARGScontains the maximum number of arguments accepted by U-Boot commands. Since the vast majority of the platforms define it to 16, it makes sense to have a default definition to 16, which will allow to remove this definition from a significant number of platforms.
Quoted 6 lines
It will allow to remove the default definition from 216 platform .h files, leaving only 56 platforms with non-default values (15, 24, 32, 48, 64, 96, 128 or 256).
Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/529bfa24/attachment.sig>
PATCH 6/8 include/configs: drop default definitions of CONFIG_SYS_MAXARGS
In reply to Thomas PetazzoniNow that include/config_fallbacks.h define a sane fallback for CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all configurations that were using the default value.
--- include/configs/10m50_devboard.h | 1 - include/configs/3c120_devboard.h | 1 - include/configs/B4860QDS.h | 1 - include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 1 - include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 1 - include/configs/M5253DEMO.h | 1 - include/configs/M5253EVBE.h | 1 - include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 1 - include/configs/M54451EVB.h | 1 - include/configs/M54455EVB.h | 1 - include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MCR3000.h | 1 - include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MigoR.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/TQM834x.h | 1 - include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 3 --- include/configs/adp-ag101p.h | 3 --- include/configs/amcore.h | 2 -- include/configs/ap121.h | 1 - include/configs/ap143.h | 1 - include/configs/ap325rxa.h | 2 -- include/configs/ap_sh4a_4a.h | 2 -- include/configs/apf27.h | 1 - include/configs/armadillo-800eva.h | 1 - include/configs/aspeed-common.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/at91-sama5_common.h | 1 - include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/axs10x.h | 1 - include/configs/boston.h | 1 - include/configs/calimain.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cobra5272.h | 1 - include/configs/colibri_pxa270.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/corvus.h | 1 - include/configs/cyrus.h | 1 - include/configs/da850evm.h | 1 - include/configs/dbau1x00.h | 2 -- include/configs/devkit3250.h | 1 - include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/ecovec.h | 2 -- include/configs/edb93xx.h | 1 - include/configs/edminiv2.h | 1 - include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/exynos-common.h | 1 - include/configs/exynos7420-common.h | 1 - include/configs/h2200.h | 1 - include/configs/highbank.h | 1 - include/configs/hrcon.h | 1 - include/configs/hsdk.h | 1 - include/configs/ids8313.h | 1 - include/configs/imgtec_xilfpga.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx31_phycore.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/kc1.h | 1 - include/configs/kzm9g.h | 1 - include/configs/legoev3.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/malta.h | 2 -- include/configs/mcx.h | 2 -- include/configs/meesc.h | 1 - include/configs/mpc8308_p1m.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/mx25pdk.h | 2 -- include/configs/mx31ads.h | 1 - include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53cx9020.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/nsim.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/pb1x00.h | 1 - include/configs/pcm052.h | 1 - include/configs/pic32mzdask.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/qemu-mips.h | 3 --- include/configs/qemu-mips64.h | 3 --- include/configs/qemu-ppce500.h | 1 - include/configs/r0p7734.h | 2 -- include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rcar-gen2-common.h | 1 - include/configs/rk3036_common.h | 1 - include/configs/rk3188_common.h | 1 - include/configs/rk322x_common.h | 1 - include/configs/rk3288_common.h | 1 - include/configs/rk3328_common.h | 1 - include/configs/rk3368_common.h | 1 - include/configs/rk3399_common.h | 1 - include/configs/rpi.h | 1 - include/configs/rsk7203.h | 1 - include/configs/rsk7264.h | 1 - include/configs/rsk7269.h | 1 - include/configs/rv1108_common.h | 1 - include/configs/s32v234evb.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/sandbox.h | 2 -- include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sh7752evb.h | 1 - include/configs/sh7753evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/smdkc100.h | 1 - include/configs/snapper9260.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/sniper.h | 1 - include/configs/socrates.h | 1 - include/configs/spear-common.h | 1 - include/configs/stih410-b2260.h | 1 - include/configs/stm32f429-discovery.h | 2 -- include/configs/stm32f746-disco.h | 1 - include/configs/strider.h | 1 - include/configs/stv0991.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/t4qds.h | 1 - include/configs/tao3530.h | 1 - include/configs/taurus.h | 1 - include/configs/tb100.h | 1 - include/configs/ti814x_evm.h | 2 -- include/configs/tricorder.h | 1 - include/configs/ts4800.h | 1 - include/configs/uniphier.h | 1 - include/configs/usb_a9263.h | 1 - include/configs/usbarmory.h | 1 - include/configs/vct.h | 1 - include/configs/ve8313.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/vme8349.h | 1 - include/configs/woodburn_common.h | 1 - include/configs/work_92105.h | 1 - include/configs/x600.h | 1 - include/configs/x86-common.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 2 -- include/configs/zipitz2.h | 1 - include/configs/zmx25.h | 1 - 216 files changed, 239 deletions(-)
include/configs/10m50_devboard.h +0 -1
@@ -78,7 +78,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_LOAD_ADDR 0xcc000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
include/configs/3c120_devboard.h +0 -1
@@ -81,7 +81,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_MAXARGS 16/* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_LOAD_ADDR 0xd4000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
include/configs/B4860QDS.h +0 -1
@@ -708,7 +708,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/BSC9131RDB.h +0 -1
@@ -297,7 +297,6 @@ extern unsigned long get_sdram_size(void);#else #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/BSC9132QDS.h +0 -1
@@ -515,7 +515,6 @@ combinations. this should be removed later#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/C29XPCIE.h +0 -1
@@ -433,7 +433,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/M5208EVBE.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M52277EVB.h +0 -1
@@ -131,7 +131,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
include/configs/M5235EVB.h +0 -1
@@ -95,7 +95,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)
include/configs/M5249EVB.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1/* include nulldev device */
include/configs/M5253DEMO.h +0 -1
@@ -94,7 +94,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000
include/configs/M5253EVBE.h +0 -1
@@ -64,7 +64,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000
include/configs/M5272C3.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M5275EVB.h +0 -1
@@ -90,7 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x800000
include/configs/M5282EVB.h +0 -1
@@ -90,7 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x20000
include/configs/M53017EVB.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5329EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5373EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M54418TWR.h +0 -1
@@ -178,7 +178,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/M54451EVB.h +0 -1
@@ -142,7 +142,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
include/configs/M54455EVB.h +0 -1
@@ -193,7 +193,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
include/configs/M5475EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/M5485EVB.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/MCR3000.h +0 -1
@@ -70,7 +70,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING 1
include/configs/MPC8308RDB.h +0 -1
@@ -426,7 +426,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8313ERDB.h +0 -1
@@ -474,7 +474,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8315ERDB.h +0 -1
@@ -454,7 +454,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8323ERDB.h +0 -1
@@ -327,7 +327,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC832XEMDS.h +0 -1
@@ -411,7 +411,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8349EMDS.h +0 -1
@@ -470,7 +470,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8349ITX.h +0 -1
@@ -493,7 +493,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_LOADADDR 800000/* default location for tftp and bootm */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC837XEMDS.h +0 -1
@@ -482,7 +482,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC837XERDB.h +0 -1
@@ -496,7 +496,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/MPC8536DS.h +0 -1
@@ -603,7 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8540ADS.h +0 -1
@@ -324,7 +324,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8541CDS.h +0 -1
@@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8544DS.h +0 -1
@@ -361,7 +361,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8548CDS.h +0 -1
@@ -465,7 +465,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8555CDS.h +0 -1
@@ -345,7 +345,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8560ADS.h +0 -1
@@ -359,7 +359,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8568MDS.h +0 -1
@@ -360,7 +360,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8572DS.h +0 -1
@@ -559,7 +559,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8610HPCD.h +0 -1
@@ -434,7 +434,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MPC8641HPCN.h +0 -1
@@ -591,7 +591,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/MigoR.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/P1010RDB.h +0 -1
@@ -723,7 +723,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/P1022DS.h +0 -1
@@ -598,7 +598,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/*
include/configs/P1023RDB.h +0 -1
@@ -253,7 +253,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/P2041RDB.h +0 -1
@@ -594,7 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/T102xQDS.h +0 -1
@@ -774,7 +774,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T102xRDB.h +0 -1
@@ -785,7 +785,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T1040QDS.h +0 -1
@@ -653,7 +653,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T104xRDB.h +0 -1
@@ -768,7 +768,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T208xQDS.h +0 -1
@@ -739,7 +739,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T208xRDB.h +0 -1
@@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/T4240RDB.h +0 -1
@@ -276,7 +276,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/TQM834x.h +0 -1
@@ -273,7 +273,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/UCP1020.h +0 -1
@@ -441,7 +441,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */
include/configs/adp-ae3xx.h +0 -3
@@ -101,9 +101,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/adp-ag101p.h +0 -3
@@ -107,9 +107,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/amcore.h +0 -2
@@ -33,8 +33,6 @@/* undef to save memory */ #undef CONFIG_SYS_LONGHELP -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16/* Boot argument buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/ap121.h +0 -1
@@ -43,7 +43,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/ap143.h +0 -1
@@ -47,7 +47,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/ap325rxa.h +0 -2
@@ -33,8 +33,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* max args accepted for monitor commands */ -#define CONFIG_SYS_MAXARGS 16/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/ap_sh4a_4a.h +0 -2
@@ -33,8 +33,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* max args accepted for monitor commands */ -#define CONFIG_SYS_MAXARGS 16/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/apf27.h +0 -1
@@ -103,7 +103,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 2048/* console I/O buffer */ -#define CONFIG_SYS_MAXARGS 16/* max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */ #define CONFIG_AUTO_COMPLETE
include/configs/armadillo-800eva.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/aspeed-common.h +0 -1
@@ -58,7 +58,6 @@*/ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_BOOTCOMMAND "bootm 20080000 20300000"
include/configs/astro_mcf5373l.h +0 -1
@@ -178,7 +178,6 @@#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_FPGA_COUNT 1
include/configs/at91-sama5_common.h +0 -1
@@ -86,7 +86,6 @@#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/at91rm9200ek.h +0 -1
@@ -174,7 +174,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* * Size of malloc() pool
include/configs/at91sam9260ek.h +0 -1
@@ -159,7 +159,6 @@ "fatload mmc 0:1 0x22000000 uImage; bootm"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/at91sam9261ek.h +0 -1
@@ -136,7 +136,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/at91sam9263ek.h +0 -1
@@ -252,7 +252,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/at91sam9m10g45ek.h +0 -1
@@ -100,7 +100,6 @@ "bootz 0x72000000 - 0x71000000"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/at91sam9n12ek.h +0 -1
@@ -159,7 +159,6 @@#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/at91sam9rlek.h +0 -1
@@ -107,7 +107,6 @@ "bootz 0x22000000 - 0x21000000"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/at91sam9x5ek.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_ENV_SIZE 0x4000#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/axs10x.h +0 -1
@@ -63,7 +63,6 @@#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16#define CONFIG_CMDLINE_EDITING /*
include/configs/boston.h +0 -1
@@ -44,7 +44,6 @@/* * Console */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP /*
include/configs/calimain.h +0 -1
@@ -187,7 +187,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_LOADADDR 0xc0700000
include/configs/cm_t35.h +0 -1
@@ -175,7 +175,6 @@#define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/cobra5272.h +0 -1
@@ -169,7 +169,6 @@ from which user programs will be started */#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/colibri_pxa270.h +0 -1
@@ -84,7 +84,6 @@#endif #undef CONFIG_SYS_LONGHELP/* Saves 10 KB */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_DEVICE_NULLDEV 1#undef CONFIG_CMDLINE_EDITING/* Saves 2.5 KB */
include/configs/colibri_vf.h +0 -1
@@ -141,7 +141,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80010000
include/configs/controlcenterd.h +0 -1
@@ -322,7 +322,6 @@#endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#ifndef CONFIG_TRAILBLAZER
include/configs/corenet_ds.h +0 -1
@@ -603,7 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/corvus.h +0 -1
@@ -106,7 +106,6 @@"nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/cyrus.h +0 -1
@@ -430,7 +430,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/da850evm.h +0 -1
@@ -242,7 +242,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_AUTO_COMPLETE
include/configs/dbau1x00.h +0 -2
@@ -71,8 +71,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args*/ -#define CONFIG_SYS_MALLOC_LEN 128*1024#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
include/configs/devkit3250.h +0 -1
@@ -120,7 +120,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_AUTO_COMPLETE
include/configs/ea20.h +0 -1
@@ -105,7 +105,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_AUTO_COMPLETE
include/configs/eb_cpu5282.h +0 -1
@@ -62,7 +62,6 @@#define CONFIG_SYS_LONGHELP 1#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x20000
include/configs/ecovec.h +0 -2
@@ -66,8 +66,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* max args accepted for monitor commands */ -#define CONFIG_SYS_MAXARGS 16/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/edb93xx.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ /* Boot argument buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 16/* Max number of command args */ /* Serial port hardware configuration */ #define CONFIG_PL010_SERIAL
include/configs/edminiv2.h +0 -1
@@ -203,7 +203,6 @@#define CONFIG_SYS_MEMTEST_START 0x00400000#define CONFIG_SYS_MEMTEST_END 0x007fffff#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 -#define CONFIG_SYS_MAXARGS 16/* Enable command line editing */ #define CONFIG_CMDLINE_EDITING
include/configs/espt.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate
include/configs/ethernut5.h +0 -1
@@ -166,7 +166,6 @@"bootm 0x22000000" /* Misc. u-boot settings */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/exynos-common.h +0 -1
@@ -44,7 +44,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 1024/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/exynos7420-common.h +0 -1
@@ -25,7 +25,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 1024/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/h2200.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_ENV_SIZE 0x00040000#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LOAD_ADDR 0xa3000000/* default load address */ /*
include/configs/highbank.h +0 -1
@@ -54,7 +54,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x800000
include/configs/hrcon.h +0 -1
@@ -522,7 +522,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/*
include/configs/hsdk.h +0 -1
@@ -73,7 +73,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/*
include/configs/ids8313.h +0 -1
@@ -451,7 +451,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x00001000
include/configs/imgtec_xilfpga.h +0 -1
@@ -46,7 +46,6 @@* Console Configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args*/ /* ------------------------------------------------- * Environment
include/configs/imx27lite-common.h +0 -1
@@ -141,7 +141,6 @@* U-Boot general configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
include/configs/imx31_phycore.h +0 -2
@@ -93,8 +93,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/integrator-common.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)/* Size of malloc() pool */
include/configs/ipam390.h +0 -1
@@ -197,7 +197,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_AUTO_COMPLETE
include/configs/kc1.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_CBSIZE 512/*
include/configs/kzm9g.h +0 -1
@@ -41,7 +41,6 @@/* prompt */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/legoev3.h +0 -1
@@ -143,7 +143,6 @@*/ #define CONFIG_BOOTFILE "uImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_AUTO_COMPLETE
include/configs/ls1021aiot.h +0 -1
@@ -246,7 +246,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMD_GREPENV
include/configs/ls1021aqds.h +0 -1
@@ -512,7 +512,6 @@ unsigned long get_board_ddr_clk(void);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000
include/configs/ls1021atwr.h +0 -1
@@ -489,7 +489,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000
include/configs/malta.h +0 -2
@@ -52,8 +52,6 @@#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING
include/configs/mcx.h +0 -2
@@ -213,8 +213,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command */ -/* args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)/* memtest works on */
include/configs/meesc.h +0 -1
@@ -118,7 +118,6 @@#endif #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/mpc8308_p1m.h +0 -1
@@ -393,7 +393,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/mpr2.h +0 -1
@@ -24,7 +24,6 @@/* U-Boot internals */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
include/configs/ms7720se.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/ms7722se.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/ms7750se.h +0 -1
@@ -30,7 +30,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
include/configs/mx25pdk.h +0 -2
@@ -63,7 +63,6 @@/* U-Boot general configuration */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
@@ -200,7 +199,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* __CONFIG_H */
include/configs/mx31ads.h +0 -1
@@ -95,7 +95,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */
include/configs/mx31pdk.h +0 -2
@@ -87,8 +87,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/mx35pdk.h +0 -1
@@ -110,7 +110,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */
include/configs/mx51evk.h +0 -1
@@ -175,7 +175,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x90000000
include/configs/mx53ard.h +0 -1
@@ -162,7 +162,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
include/configs/mx53cx9020.h +0 -1
@@ -147,7 +147,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
include/configs/mx53evk.h +0 -1
@@ -109,7 +109,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
include/configs/mx53loco.h +0 -1
@@ -156,7 +156,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
include/configs/mx53smd.h +0 -1
@@ -101,7 +101,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
include/configs/nokia_rx51.h +0 -1
@@ -331,7 +331,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/nsim.h +0 -1
@@ -36,7 +36,6 @@* Command line configuration */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16#define CONFIG_CMDLINE_EDITING /*
include/configs/omapl138_lcdk.h +0 -1
@@ -236,7 +236,6 @@#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "zImage"/* Boot file name */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_AUTO_COMPLETE
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -825,7 +825,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/p1_twr.h +0 -1
@@ -397,7 +397,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/pb1x00.h +0 -1
@@ -45,7 +45,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 128*1024
include/configs/pcm052.h +0 -1
@@ -203,7 +203,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80010000
include/configs/pic32mzdask.h +0 -1
@@ -58,7 +58,6 @@* Console Configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args*/ #define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/picosam9g45.h +0 -1
@@ -111,7 +111,6 @@ "bootz 0x22000000 - 0x21000000"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/pm9261.h +0 -1
@@ -278,7 +278,6 @@#error "Undefined memory device"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/pm9263.h +0 -1
@@ -309,7 +309,6 @@#error "Undefined memory device"#endif -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1
include/configs/pm9g45.h +0 -1
@@ -119,7 +119,6 @@#define CONFIG_ENV_SIZE 0x20000/* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP 1#define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/qemu-mips.h +0 -3
@@ -70,9 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_MALLOC_LEN (256 << 10)#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
include/configs/qemu-mips64.h +0 -3
@@ -70,9 +70,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_MALLOC_LEN (256 << 10)#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
include/configs/qemu-ppce500.h +0 -1
@@ -131,7 +131,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/r0p7734.h +0 -2
@@ -36,8 +36,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP -/* max args accepted for monitor commands */ -#define CONFIG_SYS_MAXARGS 16/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/r2dplus.h +0 -1
@@ -20,7 +20,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FE00000#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
include/configs/r7780mp.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
include/configs/rcar-gen2-common.h +0 -1
@@ -32,7 +32,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }
include/configs/rk3036_common.h +0 -1
@@ -11,7 +11,6 @@#define CONFIG_NR_DRAM_BANKS 1#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024#define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/rk3188_common.h +0 -1
@@ -15,7 +15,6 @@#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024
include/configs/rk322x_common.h +0 -1
@@ -11,7 +11,6 @@#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024#define CONFIG_SYS_BOOTM_LEN (64 << 20)/* 64M */
include/configs/rk3288_common.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024
include/configs/rk3328_common.h +0 -1
@@ -10,7 +10,6 @@#include "rockchip-common.h" #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024#define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/rk3368_common.h +0 -1
@@ -15,7 +15,6 @@#define CONFIG_SYS_SDRAM_BASE 0#define SDRAM_MAX_SIZE 0xff000000#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_BAUDRATE 115200#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024
include/configs/rk3399_common.h +0 -1
@@ -11,7 +11,6 @@#define CONFIG_NR_DRAM_BANKS 1#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024#define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/rpi.h +0 -1
@@ -95,7 +95,6 @@#define CONFIG_PREBOOT "usb start"/* Shell */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_CMDLINE_EDITING /* ATAGs support for bootm/bootz */
include/configs/rsk7203.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x0C7C0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/rsk7264.h +0 -1
@@ -20,7 +20,6 @@#define CONFIG_SYS_LONGHELP 1/* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Serial */ #define CONFIG_CONS_SCIF3 1
include/configs/rsk7269.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Serial */ #define CONFIG_CONS_SCIF7
include/configs/rv1108_common.h +0 -1
@@ -10,7 +10,6 @@#include "rockchip-common.h" #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (32 << 20)#define CONFIG_SYS_CBSIZE 1024#define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/s32v234evb.h +0 -1
@@ -164,7 +164,6 @@#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
include/configs/s5p_goni.h +0 -1
@@ -169,7 +169,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */
include/configs/sandbox.h +0 -2
@@ -40,8 +40,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_MAXARGS 16 -/* turn on command-line edit/c/auto */ #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/sbc8349.h +0 -1
@@ -406,7 +406,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/sbc8548.h +0 -1
@@ -515,7 +515,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/sbc8641d.h +0 -1
@@ -459,7 +459,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/sh7752evb.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/sh7753evb.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/sh7757lcr.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/sh7763rdp.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ #define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate
include/configs/sh7785lcr.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/shmin.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SYS_TEXT_BASE 0x8DFB0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16/* max args accepted for monitor commands */ /* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */
include/configs/smdkc100.h +0 -1
@@ -129,7 +129,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */
include/configs/snapper9260.h +0 -1
@@ -124,7 +124,6 @@#define CONFIG_ENV_OVERWRITE /* Console settings */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/snapper9g45.h +0 -1
@@ -110,7 +110,6 @@"altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0" /* Console settings */ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/sniper.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_CBSIZE 512/*
include/configs/socrates.h +0 -1
@@ -281,7 +281,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/spear-common.h +0 -1
@@ -168,7 +168,6 @@#define CONFIG_SYS_MALLOC_LEN (1024*1024)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000
include/configs/stih410-b2260.h +0 -1
@@ -43,7 +43,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_MAX_FLASH_BANKS 1#define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/stm32f429-discovery.h +0 -2
@@ -59,8 +59,6 @@#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_MALLOC_LEN (2 << 20)#define CONFIG_BOOTCOMMAND \
include/configs/stm32f746-disco.h +0 -1
@@ -48,7 +48,6 @@#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)#define CONFIG_BOOTCOMMAND \
include/configs/strider.h +0 -1
@@ -556,7 +556,6 @@ void fpga_control_clear(unsigned int bus, int pin);#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/*
include/configs/stv0991.h +0 -1
@@ -23,7 +23,6 @@#define CONFIG_ENV_OFFSET 0x30000#define CONFIG_ENV_ADDR \ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)/* serial port (PL011) configuration */
include/configs/sunxi-common.h +0 -1
@@ -167,7 +167,6 @@*/ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 1024/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/t4qds.h +0 -1
@@ -245,7 +245,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /*
include/configs/tao3530.h +0 -1
@@ -153,7 +153,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/taurus.h +0 -1
@@ -143,7 +143,6 @@#define CONFIG_ENV_SIZE (SZ_128K)/* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE
include/configs/tb100.h +0 -1
@@ -54,7 +54,6 @@*/ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16#define CONFIG_CMDLINE_EDITING /*
include/configs/ti814x_evm.h +0 -2
@@ -87,8 +87,6 @@#define V_OSCK 24000000/* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512
include/configs/tricorder.h +0 -1
@@ -211,7 +211,6 @@#define CONFIG_CMDLINE_EDITING /* enable cmdline history */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/ts4800.h +0 -1
@@ -122,7 +122,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
include/configs/uniphier.h +0 -1
@@ -62,7 +62,6 @@#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
include/configs/usb_a9263.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -#define CONFIG_SYS_MAXARGS 16#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_LONGHELP
include/configs/usbarmory.h +0 -1
@@ -25,7 +25,6 @@/* U-Boot general configurations */ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* UART */
include/configs/vct.h +0 -1
@@ -119,7 +119,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_CMDLINE_EDITING /* add command line history */
include/configs/ve8313.h +0 -1
@@ -323,7 +323,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot arg Buffer size */ /*
include/configs/vexpress_common.h +0 -1
@@ -275,6 +275,5 @@#define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 16/* max command args */ #endif /* VEXPRESS_COMMON_H */
include/configs/vf610twr.h +0 -1
@@ -189,7 +189,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80010000
include/configs/vme8349.h +0 -1
@@ -355,7 +355,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buf Size */ /*
include/configs/woodburn_common.h +0 -1
@@ -102,7 +102,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */
include/configs/work_92105.h +0 -1
@@ -87,7 +87,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_AUTO_COMPLETE
include/configs/x600.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000
include/configs/x86-common.h +0 -1
@@ -79,7 +79,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x00100000
include/configs/xpedite517x.h +0 -1
@@ -485,7 +485,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* Command-line editing */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */
include/configs/xpedite520x.h +0 -1
@@ -288,7 +288,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */
include/configs/xpedite537x.h +0 -1
@@ -338,7 +338,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */
include/configs/xpedite550x.h +0 -1
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */
include/configs/xtfpga.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_BOOTFILE "uImage"/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/zipitz2.h +0 -1
@@ -81,7 +81,6 @@ unsigned char zipitz2_spi_read(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1
include/configs/zmx25.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) -#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
Signature · 1 line
2.9.4
PATCH 6/8 include/configs: drop default definitions of CONFIG_SYS_MAXARGS
Quoted 5 lines · Thomas Petazzoni
Now that
include/config_fallbacks.hdefine a sane fallback forCONFIG_SYS_MAXARGS, we can drop the definition of this constant in all configurations that were using the default value.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/c20d45a2/attachment.sig>
PATCH 6/8 include/configs: drop default definitions of CONFIG_SYS_MAXARGS
In reply to Thomas PetazzoniQuoted 6 lines · Thomas Petazzoni
Now that
include/config_fallbacks.hdefine a sane fallback forCONFIG_SYS_MAXARGS, we can drop the definition of this constant in all configurations that were using the default value.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/8069c442/attachment.sig>
PATCH 7/8 include/configs: remove default values of CONFIG_SYS_BARGSIZE
In reply to Thomas PetazzoniCONFIG_SYS_BARGSIZE is already defined to 512 in common/image.c when not defined. Therefore, there is no point in having board configuration files define it to 512.
--- include/configs/MigoR.h | 1 - include/configs/ap325rxa.h | 2 -- include/configs/ap_sh4a_4a.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/ecovec.h | 2 -- include/configs/espt.h | 2 -- include/configs/kzm9g.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 2 -- include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/r0p7734.h | 2 -- include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rcar-gen2-common.h | 1 - include/configs/rsk7203.h | 2 -- include/configs/sh7752evb.h | 1 - include/configs/sh7753evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 2 -- include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 2 -- 22 files changed, 31 deletions(-)
include/configs/MigoR.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */ /* SCIF */
include/configs/ap325rxa.h +0 -2
@@ -33,8 +33,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 38400 }
include/configs/ap_sh4a_4a.h +0 -2
@@ -33,8 +33,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/armadillo-800eva.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/ecovec.h +0 -2
@@ -66,8 +66,6 @@/* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256 -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/espt.h +0 -2
@@ -25,8 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments -passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/kzm9g.h +0 -1
@@ -41,7 +41,6 @@/* prompt */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/mpr2.h +0 -1
@@ -24,7 +24,6 @@/* U-Boot internals */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
include/configs/ms7720se.h +0 -2
@@ -26,8 +26,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/ms7722se.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */ /* SCIF */
include/configs/ms7750se.h +0 -1
@@ -30,7 +30,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
include/configs/r0p7734.h +0 -2
@@ -36,8 +36,6 @@/* undef to save memory */ #define CONFIG_SYS_LONGHELP -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/r2dplus.h +0 -1
@@ -20,7 +20,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FE00000#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
include/configs/r7780mp.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
include/configs/rcar-gen2-common.h +0 -1
@@ -32,7 +32,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 }#define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE)
include/configs/rsk7203.h +0 -2
@@ -25,8 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x0C7C0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/sh7752evb.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/sh7753evb.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/sh7757lcr.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/sh7763rdp.h +0 -2
@@ -25,8 +25,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -#define CONFIG_SYS_BARGSIZE 512/* Buffer size for Boot Arguments -passed to kernel */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/sh7785lcr.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BARGSIZE 512#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* SCIF */
include/configs/shmin.h +0 -2
@@ -29,8 +29,6 @@#define CONFIG_SYS_TEXT_BASE 0x8DFB0000#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512/* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 }
Signature · 1 line
2.9.4
PATCH 7/8 include/configs: remove default values of CONFIG_SYS_BARGSIZE
Quoted 5 lines · Thomas Petazzoni
CONFIG_SYS_BARGSIZEis already defined to 512 incommon/image.cwhen not defined. Therefore, there is no point in having board configuration files define it to 512.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/6a2dad12/attachment.sig>
PATCH 7/8 include/configs: remove default values of CONFIG_SYS_BARGSIZE
In reply to Thomas PetazzoniQuoted 6 lines · Thomas Petazzoni
CONFIG_SYS_BARGSIZEis already defined to 512 incommon/image.cwhen not defined. Therefore, there is no point in having board configuration files define it to 512.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/55035427/attachment.sig>
PATCH 8/8 include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions
In reply to Thomas PetazzoniThis commit removes definitions of CONFIG_SYS_BARGSIZE defined to be equal to CONFIG_SYS_CBSIZE in numerous configuration files.
We remove such definitions in two situations:
- CONFIG_SYS_CBSIZE is otherwise not defined in the board configuration file, which means the default value of CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is larger.
- CONFIG_SYS_CBSIZE is defined in the board configuration file, but to a value equal or less than 512. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it is equal or larger.
--- include/configs/10m50_devboard.h | 1 - include/configs/3c120_devboard.h | 1 - include/configs/B4860QDS.h | 1 - include/configs/BSC9132QDS.h | 2 -- include/configs/C29XPCIE.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 2 -- include/configs/M5282EVB.h | 2 -- include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 3 --- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MCR3000.h | 1 - include/configs/MPC8315ERDB.h | 3 --- include/configs/MPC8323ERDB.h | 3 --- include/configs/MPC832XEMDS.h | 3 --- include/configs/MPC8349EMDS.h | 3 --- include/configs/MPC8349ITX.h | 3 --- include/configs/MPC837XEMDS.h | 3 --- include/configs/MPC837XERDB.h | 3 --- include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 2 -- include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 2 -- include/configs/MPC8641HPCN.h | 2 -- include/configs/P1010RDB.h | 2 -- include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 2 -- include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/TQM834x.h | 3 --- include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 3 --- include/configs/adp-ag101p.h | 3 --- include/configs/advantech_dms-ba16.h | 2 -- include/configs/am3517_crane.h | 2 -- include/configs/am3517_evm.h | 2 -- include/configs/amcore.h | 3 --- include/configs/aspeed-common.h | 2 -- include/configs/astro_mcf5373l.h | 2 -- include/configs/axs10x.h | 1 - include/configs/bur_cfg_common.h | 2 -- include/configs/cm_t35.h | 2 -- include/configs/cm_t3517.h | 2 -- include/configs/cobra5272.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cyrus.h | 1 - include/configs/dragonboard410c.h | 1 - include/configs/edb93xx.h | 2 -- include/configs/flea3.h | 1 - include/configs/ge_bx50v3.h | 2 -- include/configs/hikey.h | 1 - include/configs/hsdk.h | 1 - include/configs/imx31_phycore.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ls1012a_common.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1043aqds.h | 1 - include/configs/ls1046a_common.h | 1 - include/configs/ls1046aqds.h | 1 - include/configs/ls2080a_common.h | 1 - include/configs/meson-gxbb-common.h | 1 - include/configs/mx25pdk.h | 2 -- include/configs/mx31ads.h | 1 - include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 2 -- include/configs/mx53cx9020.h | 2 -- include/configs/mx53evk.h | 2 -- include/configs/mx53loco.h | 2 -- include/configs/mx53smd.h | 2 -- include/configs/mx6_common.h | 1 - include/configs/mx7_common.h | 1 - include/configs/mx7ulp_evk.h | 1 - include/configs/nokia_rx51.h | 2 -- include/configs/nsim.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/pcm052.h | 1 - include/configs/poplar.h | 1 - include/configs/qemu-ppce500.h | 1 - include/configs/s32v234evb.h | 1 - include/configs/s5p_goni.h | 2 -- include/configs/sbc8349.h | 3 --- include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/socrates.h | 2 -- include/configs/spear-common.h | 1 - include/configs/sunxi-common.h | 3 --- include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 2 -- include/configs/tao3530.h | 3 --- include/configs/tb100.h | 1 - include/configs/thunderx_88xx.h | 1 - include/configs/ti814x_evm.h | 3 --- include/configs/tricorder.h | 3 --- include/configs/ts4800.h | 1 - include/configs/usbarmory.h | 1 - include/configs/vexpress_aemv8a.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/vme8349.h | 2 -- include/configs/woodburn_common.h | 1 - include/configs/x600.h | 1 - include/configs/x86-common.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zipitz2.h | 1 - 137 files changed, 212 deletions(-)
include/configs/10m50_devboard.h +0 -1
@@ -78,7 +78,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_LOAD_ADDR 0xcc000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
include/configs/3c120_devboard.h +0 -1
@@ -81,7 +81,6 @@* MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Bootarg buf size */ #define CONFIG_SYS_LOAD_ADDR 0xd4000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
include/configs/B4860QDS.h +0 -1
@@ -708,7 +708,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/BSC9132QDS.h +0 -2
@@ -515,8 +515,6 @@ combinations. this should be removed later#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is
include/configs/C29XPCIE.h +0 -2
@@ -433,8 +433,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is
include/configs/M5208EVBE.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000#define CONFIG_SYS_CLK 166666666/* CPU Core Clock */
include/configs/M52277EVB.h +0 -2
@@ -131,8 +131,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M5235EVB.h +0 -1
@@ -95,7 +95,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)#define CONFIG_SYS_CLK 75000000
include/configs/M5249EVB.h +0 -2
@@ -41,8 +41,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1/* include nulldev device */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/M5253DEMO.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M5253EVBE.h +0 -2
@@ -64,8 +64,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M5272C3.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000
include/configs/M5275EVB.h +0 -2
@@ -90,8 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x800000#define CONFIG_BOOTCOMMAND "bootm ffe40000"
include/configs/M5282EVB.h +0 -2
@@ -90,8 +90,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M53017EVB.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000#define CONFIG_SYS_CLK 80000000
include/configs/M5329EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000#define CONFIG_SYS_CLK 80000000
include/configs/M5373EVB.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000#define CONFIG_SYS_CLK 80000000
include/configs/M54418TWR.h +0 -3
@@ -178,9 +178,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M54455EVB.h +0 -2
@@ -193,8 +193,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M5475EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK
include/configs/M5485EVB.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_PRAM 512/* 512 KB */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK
include/configs/MCR3000.h +0 -1
@@ -70,7 +70,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING 1#ifdef CONFIG_HUSH_PARSER
include/configs/MPC8315ERDB.h +0 -3
@@ -454,9 +454,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC8323ERDB.h +0 -3
@@ -327,9 +327,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC832XEMDS.h +0 -3
@@ -411,9 +411,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC8349EMDS.h +0 -3
@@ -470,9 +470,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC8349ITX.h +0 -3
@@ -493,9 +493,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_LOADADDR 800000/* default location for tftp and bootm */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC837XEMDS.h +0 -3
@@ -482,9 +482,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC837XERDB.h +0 -3
@@ -496,9 +496,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/MPC8536DS.h +0 -1
@@ -603,7 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8540ADS.h +0 -2
@@ -324,8 +324,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is
include/configs/MPC8541CDS.h +0 -1
@@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8544DS.h +0 -1
@@ -361,7 +361,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8548CDS.h +0 -1
@@ -465,7 +465,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8555CDS.h +0 -1
@@ -345,7 +345,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8568MDS.h +0 -1
@@ -360,7 +360,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8572DS.h +0 -1
@@ -559,7 +559,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/MPC8610HPCD.h +0 -2
@@ -434,8 +434,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/MPC8641HPCN.h +0 -2
@@ -591,8 +591,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/P1010RDB.h +0 -2
@@ -723,8 +723,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 64 MB of memory, since this is
include/configs/P1022DS.h +0 -1
@@ -598,7 +598,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* * For booting Linux, the board info and command line data
include/configs/P1023RDB.h +0 -2
@@ -253,8 +253,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* * For booting Linux, the board info and command line data
include/configs/P2041RDB.h +0 -2
@@ -594,8 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* * For booting Linux, the board info and command line data
include/configs/T102xQDS.h +0 -1
@@ -774,7 +774,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T102xRDB.h +0 -1
@@ -785,7 +785,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T1040QDS.h +0 -1
@@ -653,7 +653,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T104xRDB.h +0 -1
@@ -768,7 +768,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T208xQDS.h +0 -1
@@ -739,7 +739,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T208xRDB.h +0 -1
@@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/T4240RDB.h +0 -1
@@ -276,7 +276,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/TQM834x.h +0 -3
@@ -273,9 +273,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#undef CONFIG_WATCHDOG/* watchdog disabled */ /*
include/configs/UCP1020.h +0 -1
@@ -441,7 +441,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /*
include/configs/adp-ae3xx.h +0 -3
@@ -101,9 +101,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * Size of malloc() pool */
include/configs/adp-ag101p.h +0 -3
@@ -107,9 +107,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * Size of malloc() pool */
include/configs/advantech_dms-ba16.h +0 -2
@@ -211,8 +211,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
include/configs/am3517_crane.h +0 -2
@@ -169,8 +169,6 @@#define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command */ /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)/* memtest works on */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
include/configs/am3517_evm.h +0 -2
@@ -235,8 +235,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
include/configs/amcore.h +0 -3
@@ -33,9 +33,6 @@/* undef to save memory */ #undef CONFIG_SYS_LONGHELP -/* Boot argument buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/aspeed-common.h +0 -2
@@ -58,8 +58,6 @@*/ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_BOOTCOMMAND "bootm 20080000 20300000"#define CONFIG_ENV_OVERWRITE
include/configs/astro_mcf5373l.h +0 -2
@@ -178,8 +178,6 @@#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_FPGA_COUNT 1#define CONFIG_FPGA_XILINX #define CONFIG_FPGA_SPARTAN3
include/configs/axs10x.h +0 -1
@@ -80,7 +80,6 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* * Misc utility configuration
include/configs/bur_cfg_common.h +0 -2
@@ -49,7 +49,5 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* __BUR_CFG_COMMON_H__ */
include/configs/cm_t35.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)/* memtest */ /* works on */
include/configs/cm_t3517.h +0 -2
@@ -181,8 +181,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
include/configs/cobra5272.h +0 -2
@@ -169,8 +169,6 @@ from which user programs will be started */#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* *----------------------------------------------------------------------------- * End of user parameters to be customized
include/configs/colibri_pxa270.h +0 -1
@@ -84,7 +84,6 @@#endif #undef CONFIG_SYS_LONGHELP/* Saves 10 KB */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_DEVICE_NULLDEV 1#undef CONFIG_CMDLINE_EDITING/* Saves 2.5 KB */ #undef CONFIG_AUTO_COMPLETE/* Saves 2.5 KB */
include/configs/controlcenterd.h +0 -1
@@ -322,7 +322,6 @@#endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#ifndef CONFIG_TRAILBLAZER /*
include/configs/corenet_ds.h +0 -1
@@ -603,7 +603,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/cyrus.h +0 -1
@@ -430,7 +430,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/dragonboard410c.h +0 -1
@@ -114,7 +114,6 @@ REFLASH(dragonboard/u-boot.img, 8)\/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MAXARGS 64/* max command args */ #endif
include/configs/edb93xx.h +0 -2
@@ -78,8 +78,6 @@#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ -/* Boot argument buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Serial port hardware configuration */ #define CONFIG_PL010_SERIAL
include/configs/flea3.h +0 -1
@@ -93,7 +93,6 @@#define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/ge_bx50v3.h +0 -2
@@ -242,8 +242,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
include/configs/hikey.h +0 -1
@@ -107,7 +107,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64/* max command args */
include/configs/hsdk.h +0 -1
@@ -73,7 +73,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* * Misc utility configuration
include/configs/imx31_phycore.h +0 -2
@@ -93,8 +93,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/integrator-common.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)/* Size of malloc() pool */ /* Serial port PL010/PL011 through the device model */
include/configs/ls1012a_common.h +0 -1
@@ -107,7 +107,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/ls1021aiot.h +0 -1
@@ -246,7 +246,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMD_GREPENV #define CONFIG_CMD_MEMINFO
include/configs/ls1021aqds.h +0 -1
@@ -512,7 +512,6 @@ unsigned long get_board_ddr_clk(void);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1021atwr.h +0 -1
@@ -489,7 +489,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1043a_common.h +0 -1
@@ -330,7 +330,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #ifndef SPL_NO_MISC
include/configs/ls1043aqds.h +0 -1
@@ -383,7 +383,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1046a_common.h +0 -1
@@ -268,7 +268,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE
include/configs/ls1046aqds.h +0 -1
@@ -420,7 +420,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_MISC_INIT_R #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls2080a_common.h +0 -1
@@ -216,7 +216,6 @@ unsigned long long get_qixis_addr(void);/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1#define CONFIG_AUTO_COMPLETE
include/configs/meson-gxbb-common.h +0 -1
@@ -25,7 +25,6 @@#define GICD_BASE 0xc4301000#define GICC_BASE 0xc4302000 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING
include/configs/mx25pdk.h +0 -2
@@ -199,6 +199,4 @@#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#endif /* __CONFIG_H */
include/configs/mx31ads.h +0 -1
@@ -95,7 +95,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/mx31pdk.h +0 -2
@@ -87,8 +87,6 @@* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */ #define CONFIG_SYS_MEMTEST_START 0x80000000
include/configs/mx35pdk.h +0 -1
@@ -110,7 +110,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/mx51evk.h +0 -1
@@ -175,7 +175,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x90000000#define CONFIG_SYS_MEMTEST_END 0x90010000
include/configs/mx53ard.h +0 -2
@@ -162,8 +162,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000
include/configs/mx53cx9020.h +0 -2
@@ -147,8 +147,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000
include/configs/mx53evk.h +0 -2
@@ -109,8 +109,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000
include/configs/mx53loco.h +0 -2
@@ -156,8 +156,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000
include/configs/mx53smd.h +0 -2
@@ -101,8 +101,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000
include/configs/mx6_common.h +0 -1
@@ -64,7 +64,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#ifndef CONFIG_SYS_DCACHE_OFF #endif
include/configs/mx7_common.h +0 -1
@@ -42,7 +42,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#ifndef CONFIG_SYS_DCACHE_OFF #endif
include/configs/mx7ulp_evk.h +0 -1
@@ -79,7 +79,6 @@#define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 256 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING
include/configs/nokia_rx51.h +0 -2
@@ -331,8 +331,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
include/configs/nsim.h +0 -1
@@ -54,6 +54,5 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* _CONFIG_NSIM_H_ */
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -825,7 +825,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/p1_twr.h +0 -1
@@ -397,7 +397,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/pcm052.h +0 -1
@@ -203,7 +203,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80010000#define CONFIG_SYS_MEMTEST_END 0x87C00000
include/configs/poplar.h +0 -1
@@ -77,6 +77,5 @@#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* _POPLAR_H_ */
include/configs/qemu-ppce500.h +0 -1
@@ -131,7 +131,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/s32v234evb.h +0 -1
@@ -164,7 +164,6 @@#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_SYS_PROMPT "=> "#undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_MEMTEST
include/configs/s5p_goni.h +0 -2
@@ -169,8 +169,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
include/configs/sbc8349.h +0 -3
@@ -406,9 +406,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/sbc8548.h +0 -1
@@ -515,7 +515,6 @@#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/sbc8641d.h +0 -2
@@ -459,8 +459,6 @@#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/smdkc100.h +0 -2
@@ -129,8 +129,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 384/* Print Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
include/configs/socrates.h +0 -2
@@ -281,8 +281,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/spear-common.h +0 -1
@@ -168,7 +168,6 @@#define CONFIG_SYS_MALLOC_LEN (1024*1024)#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000#define CONFIG_SYS_FLASH_EMPTY_INFO
include/configs/sunxi-common.h +0 -3
@@ -168,9 +168,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 1024/* Print Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* standalone support */ #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
include/configs/t4qds.h +0 -1
@@ -245,7 +245,6 @@#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ /* * For booting Linux, the board info and command line data
include/configs/tam3517-common.h +0 -2
@@ -97,8 +97,6 @@#define CONFIG_SYS_MAXARGS 32/* max number of command */ /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)/* memtest works on */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
include/configs/tao3530.h +0 -3
@@ -153,9 +153,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_ALT_MEMTEST 1#define CONFIG_SYS_MEMTEST_START (0x82000000)/* memtest */ /* defaults */
include/configs/tb100.h +0 -1
@@ -72,6 +72,5 @@* Console configuration */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#endif /* _CONFIG_TB100_H_ */
include/configs/thunderx_88xx.h +0 -1
@@ -74,7 +74,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1#define CONFIG_SYS_MAXARGS 64/* max command args */
include/configs/ti814x_evm.h +0 -3
@@ -91,9 +91,6 @@/* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + PHYS_DRAM_1_SIZE - (8 << 12))
include/configs/tricorder.h +0 -3
@@ -212,9 +212,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x00000000)#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 0x07000000)/* 112 MB */
include/configs/ts4800.h +0 -1
@@ -122,7 +122,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
include/configs/usbarmory.h +0 -1
@@ -25,7 +25,6 @@/* U-Boot general configurations */ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* UART */ #define CONFIG_MXC_UART
include/configs/vexpress_aemv8a.h +0 -1
@@ -230,7 +230,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64/* max command args */
include/configs/vexpress_common.h +0 -1
@@ -273,7 +273,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ #define CONFIG_SYS_LONGHELP #endif /* VEXPRESS_COMMON_H */
include/configs/vf610twr.h +0 -1
@@ -189,7 +189,6 @@/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x80010000#define CONFIG_SYS_MEMTEST_END 0x87C00000
include/configs/vme8349.h +0 -2
@@ -355,8 +355,6 @@#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buf Size */ -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/woodburn_common.h +0 -1
@@ -102,7 +102,6 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/x600.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR 0x00800000/* Use last 2 lwords in internal SRAM for bootcounter */
include/configs/x86-common.h +0 -1
@@ -79,7 +79,6 @@*/ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_MEMTEST_START 0x00100000#define CONFIG_SYS_MEMTEST_END 0x01000000
include/configs/xpedite517x.h +0 -1
@@ -485,7 +485,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* Command-line editing */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */ #define CONFIG_PANIC_HANG /* do not reset board on panic */
include/configs/xpedite520x.h +0 -1
@@ -288,7 +288,6 @@*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */
include/configs/xpedite537x.h +0 -1
@@ -338,7 +338,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */
include/configs/xpedite550x.h +0 -1
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */
include/configs/zipitz2.h +0 -1
@@ -81,7 +81,6 @@ unsigned char zipitz2_spi_read(void);#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1/*
Signature · 1 line
2.9.4
PATCH 8/8 include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions
Quoted 11 lines · Thomas Petazzoni
This commit removes definitions of
CONFIG_SYS_BARGSIZEdefined to be equal toCONFIG_SYS_CBSIZEin numerous configuration files.We remove such definitions in two situations:
-
CONFIG_SYS_CBSIZEis otherwise not defined in the board configuration file, which means the default value ofCONFIG_SYS_CBSIZE== 256 applies. In this case, the default value ofCONFIG_SYS_BARGSIZE== 512 (common/image.c) is suitable, as it is larger.
Quoted 6 lines
-
CONFIG_SYS_CBSIZEis defined in the board configuration file, but to a value equal or less than 512. In this case, the default value ofCONFIG_SYS_BARGSIZE== 512 (common.image.c) is suitable, as it is equal or larger.Signed-off-by Thomas Petazzoni <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/25883eb5/attachment.sig>
PATCH 8/8 include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions
In reply to Thomas PetazzoniQuoted 5 lines · Thomas Petazzoni
This commit removes definitions of
CONFIG_SYS_BARGSIZEdefined to be equal toCONFIG_SYS_CBSIZEin numerous configuration files.We remove such definitions in two situations:
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/dc7cb29b/attachment.sig>
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
In reply to Thomas PetazzoniHi Thomas,
Quoted 35 lines · Thomas Petazzoni
Hello,
While adding support for new platforms, I found out that many, many platforms define pretty much the same values for:
CONFIG_SYS_CBSIZE
CONFIG_SYS_PBSIZE
CONFIG_SYS_MAXARGS
CONFIG_SYS_BARGSIZEwith just a few platforms deviating from the values that have clearly been copy/pasted over and over again all over the place.
In this patch series, I propose to have U-Boot define some sane defaults for those 4 configuration options, and cleanup all the board configuration files that were using the default values. This leads to the removal of 1300+ lines.
Of course, this is all open for discussion, and at this point, I have only done minimal build testing, as my goal is to get the discussion started.
Open questions:
- Do we really need to have all those remaining boards with custom/arbitrary values for those configuration options?
- Does it really makes sense for those configuration options to be customized in board configuration files? For example, the size of the kernel command line is not at all tied to the underlying hardware, but rather how much arguments the user wants to pass to the kernel. Ditto for the maximum number of arguments passed to U-Boot commands. Perhaps we want to remove those options entirely from the .h files, and simply have a
Kconfigoption instead?
Quoted 1 line
Also, let me know if I have missed some existing work in this area.
This might be considered a step along the way but these could become Kconfig options instead. The same concept exist of having the Kconfig specify a sane default and board configs being able to set a value different to the default. The process is pretty well automated with tools/moveconfig.py.
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
In reply to Thomas PetazzoniDear Thomas,
Quoted 11 lines · In message <[email protected]> you…
While adding support for new platforms, I found out that many, many platforms define pretty much the same values for:
CONFIG_SYS_CBSIZE
CONFIG_SYS_PBSIZE
CONFIG_SYS_MAXARGS
CONFIG_SYS_BARGSIZEwith just a few platforms deviating from the values that have clearly been copy/pasted over and over again all over the place.
Thanks for cleaning this up!
Quoted 4 lines
In this patch series, I propose to have U-Boot define some sane defaults for those 4 configuration options, and cleanup all the board configuration files that were using the default values. This leads to the removal of 1300+ lines.
Would it not be even easier (and less code) to move these definitions to Kconfig settings?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If two witches would watch two watches, which witch would watch which watch?
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Hello,
Quoted 7 lines · Wolfgang Denk
Quoted 4 lines
In this patch series, I propose to have U-Boot define some sane defaults for those 4 configuration options, and cleanup all the board configuration files that were using the default values. This leads to the removal of 1300+ lines.
Would it not be even easier (and less code) to move these definitions to
Kconfigsettings?
I believe this patch series is a step in that direction. With this patch series applied, we can now clearly identify which boards have custom values for CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE}, and therefore more easily move these from the .h files to defconfig files.
Unless of course we decide that having such custom values
in .h/defconfig is useless, and we want to drop them entirely. As I said in my cover letter, I really don't see why a board configuration file (be it a .h or a defconfig) should specify the maximum number of command arguments or the maximum size of the Linux kernel command line. The choice for such values is totally independent from the HW, but rather tied to the specific use of a given board. For the same board, most people will find the default value to be OK, some people will need a larger number of command arguments or a bigger Linux kernel command line.
Let me know what your preference is.
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Dear Thomas,
Quoted 8 lines · In message <20170824162318.7132066a@windsurf> you wrote:
Quoted 3 lines
Would it not be even easier (and less code) to move these definitions to
Kconfigsettings?I believe this patch series is a step in that direction. With this patch series applied, we can now clearly identify which boards have custom values for CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE}, and therefore more easily move these from the .h files to defconfig files.
So you think moving this to Kconfig would be a second step? Ok, fine with me.
Quoted 5 lines
Unless of course we decide that having such custom values
in .h/defconfig is useless, and we want to drop them entirely. As I said in my cover letter, I really don't see why a board configuration file (be it a .h or a defconfig) should specify the maximum number of command arguments or the maximum size of the Linux kernel command line.
I can't say how much of this still applies, but in the old days of U-Boot there were a number of systems with very restricted resources; to enable console I/O even in early stages (when running from parallel NOR flash with only very limited (tatic) RAM for I/O buffer it was sometimes necessary to set console buffer and print buffer sizes to really low values.
Quoted 2 lines
The choice for such values is totally independent from the HW, but rather tied to the specific use of a given board. For the same board,
No, it is not. Buffer sizes eat on RAM, and there are environments (like today in SPL) where this may be a precious resource.
Quoted 5 lines
most people will find the default value to be OK, some people will need a larger number of command arguments or a bigger Linux kernel command line.
Let me know what your preference is.
I think it makes a lot of sense to keep such configuration parameters changable, but we hould not stop half way but rather move this to Kconfig so it's easy to use a default setting, and only boards with special needs have to adjust this in their defconfig files.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Conscious is when you are aware of something, and conscience is when you wish you weren't.
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Hello,
Quoted 7 lines · Wolfgang Denk
Quoted 4 lines
I believe this patch series is a step in that direction. With this patch series applied, we can now clearly identify which boards have custom values for CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE}, and therefore more easily move these from the .h files to defconfig files.
So you think moving this to
Kconfigwould be a second step? Ok, fine with me.
Yes, this would be a second step. The current patch series eliminates the situations where the .h files use the default values, or values that are close enough to the default values for the default value to remain reasonable.
Of course, the patches should be reviewed, and the decision taken by them potentially discussed.
Quoted 5 lines
Quoted 2 lines
The choice for such values is totally independent from the HW, but rather tied to the specific use of a given board. For the same board,
No, it is not. Buffer sizes eat on RAM, and there are environments (like today in SPL) where this may be a precious resource.
Right, true.
Quoted 10 lines
Quoted 5 lines
most people will find the default value to be OK, some people will need a larger number of command arguments or a bigger Linux kernel command line.
Let me know what your preference is.
I think it makes a lot of sense to keep such configuration parameters changable, but we hould not stop half way but rather move this to
Kconfigso it's easy to use a default setting, and only boards with special needs have to adjust this in their defconfig files.
OK. So let's review this first patch series. Once we agree on it and it gets merged, I can work on the second step of moving those configuration options to Kconfig.
Thanks for the very useful feedback!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
Quoted 12 lines · Thomas Petazzoni
Hello,
Quoted 5 lines · Wolfgang Denk
Quoted 4 lines
I believe this patch series is a step in that direction. With this patch series applied, we can now clearly identify which boards have custom values for CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE}, and therefore more easily move these from the .h files to defconfig files.
Quoted 7 lines
Quoted 2 lines
So you think moving this to
Kconfigwould be a second step? Ok, fine with me.Yes, this would be a second step. The current patch series eliminates the situations where the .h files use the default values, or values that are close enough to the default values for the default value to remain reasonable.
Moving these to Kconfig would achieve the same, as boards that do not override the defaults (or override the defaults with the same value) would not have an entry added to their defconfig.
Furthermore, if there’s an override for an entire architecture (as I has seen with the SPL_LDSCRIPT conversion), once can always have a default value added to that architecture’s Kconfig.
In other words: I don’t see any value in doing this as a two-step process as this will just trigger two rounds of reviews and integration testing.
Regards,
Philipp.
Quoted 37 lines
Of course, the patches should be reviewed, and the decision taken by them potentially discussed.
Quoted 5 lines
Quoted 2 lines
The choice for such values is totally independent from the HW, but rather tied to the specific use of a given board. For the same board,
No, it is not. Buffer sizes eat on RAM, and there are environments (like today in SPL) where this may be a precious resource.
Right, true.
Quoted 10 lines
Quoted 5 lines
most people will find the default value to be OK, some people will need a larger number of command arguments or a bigger Linux kernel command line.
Let me know what your preference is.
I think it makes a lot of sense to keep such configuration parameters changable, but we hould not stop half way but rather move this to
Kconfigso it's easy to use a default setting, and only boards with special needs have to adjust this in their defconfig files.OK. So let's review this first patch series. Once we agree on it and it gets merged, I can work on the second step of moving those configuration options to
Kconfig.Thanks for the very useful feedback!
Thomas
Signature · 7 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de https://lists.denx.de/listinfo/u-boot
cover Clean up CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE} definitions
In reply to Thomas PetazzoniQuoted 28 lines · Thomas Petazzoni
Hello,
Quoted 7 lines · Wolfgang Denk
Quoted 4 lines
In this patch series, I propose to have U-Boot define some sane defaults for those 4 configuration options, and cleanup all the board configuration files that were using the default values. This leads to the removal of 1300+ lines.
Would it not be even easier (and less code) to move these definitions to
Kconfigsettings?I believe this patch series is a step in that direction. With this patch series applied, we can now clearly identify which boards have custom values for CONFIG_SYS_{CBSIZE, PBSIZE, MAXARGS, BARGSIZE}, and therefore more easily move these from the .h files to defconfig files.
Unless of course we decide that having such custom values
in .h/defconfig is useless, and we want to drop them entirely. As I said in my cover letter, I really don't see why a board configuration file (be it a .h or a defconfig) should specify the maximum number of command arguments or the maximum size of the Linux kernel command line. The choice for such values is totally independent from the HW, but rather tied to the specific use of a given board. For the same board, most people will find the default value to be OK, some people will need a larger number of command arguments or a bigger Linux kernel command line.
Quoted 1 line
Let me know what your preference is.
Thanks for doing this. What I think we should do is migrate these to Kconfig with the fallback values as the 'vanilla' default and use moveconfig.py -I min2 to see if there's other cases where it's a SoC thing or similar where other non-default small values were used in order to reduce the overall footprint.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170824/485d1a9c/attachment.sig>