x86: Cleanup IDT code
Subsystems (9)
cover x86: Cleanup IDT code
The IDT code in x86 is a convoluted mess and contains quite some bogosities.
One of the main offenders is the extra tracing IDT which has been introduced to reduce the impact of tracing on the exception vectors when tracepoints are disabled.
This results in an unholy macro mess which magically creates IDT entries by prepending the exception handler name by trace_.
For most exceptions the tracepoint overhead in the disabled case is two NOP5, which are negligible compared to the heavy work of the exception handler itself. Modern CPUs are pretty good in optimizing NOPs.
The only two handlers where the overhead matters are the pagefault handler and the reschedule IPI, where an active tracepoint introduces more extra work. These two can be handled with separate static keys which reduces the impact to a minimum.
As a result the whole tracing IDT machinery can be removed.
The second part of the series cleans up the handling of IDT/GDT/LDT/TSS descriptors to get rid of macro based initialization via the obscure raw 32bit union fields a and b.
The last part moves the setup of the IDT into a separate file, where all gate related code is moved to. The gate setup is converted to a table based mechanism so the resulting code is smaller and better understandable.
The series applies on top of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/apic
and is available as a git branch from
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git WIP.x86/apic
There is more cleanup to come in the near future, which aims at replacing the braindamaged vector assignment mechanics, which has quite some shortcomings.
Thanks,
tglx
--- arch/x86/boot/compressed/eboot.c | 8 arch/x86/entry/entry_32.S | 20 - arch/x86/entry/entry_64.S | 26 -- arch/x86/entry/vdso/vma.c | 2 arch/x86/include/asm/desc.h | 246 +++----------------- arch/x86/include/asm/desc_defs.h | 122 +++++----- arch/x86/include/asm/entry_arch.h | 14 - arch/x86/include/asm/hw_irq.h | 20 - arch/x86/include/asm/irq.h | 4 arch/x86/include/asm/segment.h | 4 arch/x86/include/asm/trace/exceptions.h | 8 arch/x86/include/asm/trace/irq_vectors.h | 24 +- arch/x86/include/asm/traps.h | 10 arch/x86/include/asm/xen/hypercall.h | 6 arch/x86/kernel/Makefile | 3 arch/x86/kernel/apic/apic.c | 70 +---- arch/x86/kernel/apic/vector.c | 2 arch/x86/kernel/cpu/common.c | 9 arch/x86/kernel/cpu/mcheck/mce_amd.c | 16 - arch/x86/kernel/cpu/mcheck/therm_throt.c | 20 - arch/x86/kernel/cpu/mcheck/threshold.c | 16 - arch/x86/kernel/cpu/mshyperv.c | 9 arch/x86/kernel/head32.c | 4 arch/x86/kernel/head64.c | 6 arch/x86/kernel/head_32.S | 42 --- arch/x86/kernel/irq.c | 29 -- arch/x86/kernel/irq_work.c | 16 - arch/x86/kernel/irqinit.c | 102 -------- arch/x86/kernel/kvm.c | 4 arch/x86/kernel/machine_kexec_32.c | 14 - arch/x86/kernel/reboot.c | 4 arch/x86/kernel/setup.c | 4 arch/x86/kernel/setup_percpu.c | 9 arch/x86/kernel/smp.c | 81 +----- arch/x86/kernel/tls.c | 2 arch/x86/kernel/tracepoint.c | 57 +--- arch/x86/kernel/traps.c | 108 --------- arch/x86/kvm/vmx.c | 2 arch/x86/math-emu/fpu_entry.c | 11 arch/x86/math-emu/fpu_system.h | 48 +++- arch/x86/math-emu/get_address.c | 17 - arch/x86/mm/fault.c | 47 +-- arch/x86/xen/enlighten_pv.c | 14 - b/arch/x86/include/asm/trace/common.h | 16 + b/arch/x86/kernel/eisa.c | 18 + b/arch/x86/kernel/idt.c | 365 +++++++++++++++++++++++++++++++ drivers/xen/events/events_base.c | 6 47 files changed, 718 insertions(+), 967 deletions(-)
PATCH 1/41 x86/irq: Remove vector_used_by_percpu_irq()
Last user (lguest) is gone. Remove it.
--- arch/x86/include/asm/irq.h | 1 - arch/x86/kernel/irq.c | 2 -- arch/x86/kernel/irqinit.c | 12 ------------ 3 files changed, 15 deletions(-)
arch/x86/include/asm/irq.h +0 -1
@@ -44,7 +44,6 @@ extern __visible unsigned int do_IRQ(str/* Interrupt vector management */ extern DECLARE_BITMAP(used_vectors, NR_VECTORS); -extern int vector_used_by_percpu_irq (unsigned int vector);extern void init_ISA_irqs (void );
arch/x86/kernel/irq.c +0 -2
@@ -346,8 +346,6 @@ EXPORT_SYMBOL_GPL(kvm_set_posted_intr_waset_irq_regs (old_regs); } -EXPORT_SYMBOL_GPL (vector_used_by_percpu_irq); -#ifdef CONFIG_HOTPLUG_CPU /* These two declarations are only used in check_irq_vectors_for_cpu_disable()
arch/x86/kernel/irqinit.c +0 -12
@@ -55,18 +55,6 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) [0 ... NR_VECTORS - 1] = VECTOR_UNUSED, }; -int vector_used_by_percpu_irq (unsigned int vector) -{ -int cpu; - -for_each_online_cpu (cpu) { -if (!IS_ERR_OR_NULL (per_cpu (vector_irq, cpu)[vector])) -return 1 ; - } - -return 0 ; -} -void __init init_ISA_irqs (void ) {struct irq_chip *chip = legacy_pic->chip;
PATCH 2/41 x86/irq: Unexport used_vectors
In reply to Thomas GleixnerNo modular users.
--- arch/x86/kernel/traps.c | 1 - 1 file changed, 1 deletion(-)
arch/x86/kernel/traps.c +0 -1
@@ -83,7 +83,6 @@ gate_desc debug_idt_table[NR_VECTORS] __ gate_desc idt_table[NR_VECTORS] __page_aligned_bss;DECLARE_BITMAP (used_vectors,NR_VECTORS ); -EXPORT_SYMBOL_GPL (used_vectors);static inline void cond_local_irq_enable (struct pt_regs *regs) {
PATCH 3/41 x86/irq: Move ifdeffery to header file
In reply to Thomas GleixnerHaving this in the middle of code is beyond ugly.
--- arch/x86/include/asm/desc.h | 5 +++++ arch/x86/kernel/irqinit.c | 3 --- 2 files changed, 5 insertions(+), 3 deletions(-)
arch/x86/include/asm/desc.h +5 -0
@@ -482,7 +482,12 @@ static inline void _set_gate(int gate, u 0, 0, __KERNEL_CS); \ } while (0) +#ifdef CONFIG_X86_LOCAL_APIC extern int first_system_vector; +#else +#define first_system_vector NR_VECTORS +#endif +/* used_vectors is BITMAP for irq is not managed by percpu vector_irq */ extern unsigned long used_vectors[];
arch/x86/kernel/irqinit.c +0 -3
@@ -169,9 +169,6 @@ void __init native_init_IRQ(void)* 'special' SMP interrupts) */ i =FIRST_EXTERNAL_VECTOR ; -#ifndef CONFIG_X86_LOCAL_APIC -#define first_system_vector NR_VECTORS -#endif for_each_clear_bit_from (i, used_vectors, first_system_vector) {/* IA32_SYSCALL_VECTOR could be used in trap_init already. */ set_intr_gate(i, irq_entries_start +
Re: [patch 03/41] x86/irq: Move ifdeffery to header file
Quoted 1 line · Thomas Gleixner
Having this in the middle of code is beyond ugly.
Bah, I know why this was in the middle of the code.
I reorder the series so the whole first_system_vector nonsense gets removed early.
Thanks,
tglx
PATCH 4/41 x86/boot: Move EISA setup to a proper place
In reply to Thomas GleixnerEISA has absolutely nothing to do with traps. The EISA bus detection does not need to run in the very early boot. It's good enough to run it before the EISA bus and drivers are initialized.
--- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/eisa.c | 18 ++++++++++++++++++ arch/x86/kernel/traps.c | 13 ------------- 3 files changed, 19 insertions(+), 13 deletions(-)
arch/x86/kernel/Makefile +1 -0
@@ -111,6 +111,7 @@ obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= parav obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_X86_PMEM_LEGACY_DEVICE) += pmem.o +obj-$(CONFIG_EISA) += eisa.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
arch/x86/kernel/eisa.c new file +18 -0
@@ -0,0 +1,18 @@ +/* +* EISA specific code +* +* This file is licensed under the GPL V2 +*/ +#include <linux/ioport.h> +#include <linux/eisa.h> + +static __init int eisa_bus_probe (void ) +{ +void __iomem *p =ioremap (0x0FFFD9 ,4 ); + +if (readl (p) =='E' + ('I' <<8 ) + ('S' <<16 ) + ('A' <<24 )) + EISA_bus =1 ; +iounmap (p,4 ); +return 0 ; +} +subsys_initcall (eisa_bus_probe);
arch/x86/kernel/traps.c +0 -13
@@ -38,11 +38,6 @@#include <linux/smp.h> #include <linux/io.h> -#ifdef CONFIG_EISA -#include <linux/ioport.h> -#include <linux/eisa.h> -#endif -#if defined(CONFIG_EDAC )#include <linux/edac.h> #endif
@@ -969,14 +964,6 @@ void __init trap_init(void) {int i; -#ifdef CONFIG_EISA -void __iomem *p =early_ioremap (0x0FFFD9 ,4 ); - -if (readl (p) =='E' + ('I' <<8 ) + ('S' <<16 ) + ('A' <<24 )) - EISA_bus =1 ; -early_iounmap (p,4 ); -#endif -set_intr_gate (X86_TRAP_DE , divide_error);set_intr_gate_ist (X86_TRAP_NMI , &nmi,NMI_STACK );/* int4 can be called from all */
Re: [patch 04/41] x86/boot: Move EISA setup to a proper place
arch/x86/kernel/eisa.c line 15
Quoted 7 lines · Thomas Gleixner
arch/x86/kernel/eisa.c new file +7
-0+static __init int eisa_bus_probe (void ) +{ +void __iomem *p =ioremap (0x0FFFD9 ,4 ); + +if (readl (p) =='E' + ('I' <<8 ) + ('S' <<16 ) + ('A' <<24 )) + EISA_bus =1 ; +iounmap (p,4 );
That should obviously be:
iounmap(p);
But as a side note:
Can't we finally get rid of this EISA cruft alltogether?
Thanks,
tglx
PATCH 5/41 x86/tracing: Introduce a static key for exception tracing
In reply to Thomas GleixnerSwitching the IDT just for avoiding tracepoints creates a complete impenetrable macro/inline/ifdef mess.
There is no point in avoiding tracepoints for most of the traps/exceptions. For the more expensive tracepoints, like pagefaults, this can be handled with an explicit static key.
Preparatory patch to remove the tracing idt.
--- arch/x86/include/asm/trace/common.h | 15 +++++++++++++++ arch/x86/include/asm/trace/exceptions.h | 4 +--- arch/x86/include/asm/trace/irq_vectors.h | 4 +--- arch/x86/kernel/tracepoint.c | 9 ++++++++- 4 files changed, 25 insertions(+), 7 deletions(-)
arch/x86/include/asm/trace/common.h new file +15 -0
@@ -0,0 +1,15 @@ +#ifndef _ASM_TRACE_COMMON_H +#define _ASM_TRACE_COMMON_H + +extern int trace_irq_vector_regfunc (void ); +extern void trace_irq_vector_unregfunc (void ); + +#ifdef CONFIG_TRACING +DECLARE_STATIC_KEY_FALSE (trace_irqvectors_key); +#define trace_irqvectors_enabled () \ + static_branch_unlikely(&trace_irqvectors_key) +#else +static inline bool trace_irqvectors_enabled (void ) {return false; } +#endif + +#endif
arch/x86/include/asm/trace/exceptions.h +1 -3
@@ -5,9 +5,7 @@#define _TRACE_PAGE_FAULT_H#include <linux/tracepoint.h> - -extern int trace_irq_vector_regfunc (void ); -extern void trace_irq_vector_unregfunc (void ); +#include <asm/trace/common.h> DECLARE_EVENT_CLASS(x86_exceptions,
arch/x86/include/asm/trace/irq_vectors.h +1 -3
@@ -5,9 +5,7 @@#define _TRACE_IRQ_VECTORS_H#include <linux/tracepoint.h> - -extern int trace_irq_vector_regfunc (void ); -extern void trace_irq_vector_unregfunc (void ); +#include <asm/trace/common.h> DECLARE_EVENT_CLASS(x86_irq_vector,
arch/x86/kernel/tracepoint.c +8 -1
@@ -4,9 +4,11 @@* Copyright (C) 2013 Seiji Aguchi <[email protected]> * */ +#include <linux/jump_label.h> +#include <linux/atomic.h> +#include <asm/hw_irq.h> #include <asm/desc.h> -#include <linux/atomic.h> atomic_t trace_idt_ctr =ATOMIC_INIT (0 );struct desc_ptr trace_idt_descr = {NR_VECTORS *16 -1 ,
@@ -15,6 +17,7 @@ struct desc_ptr trace_idt_descr = { NR_V/* No need to be aligned, but done to keep all IDTs defined the same way. */ gate_desc trace_idt_table[NR_VECTORS] __page_aligned_bss; +DEFINE_STATIC_KEY_FALSE (trace_irqvectors_key);static int trace_irq_vector_refcount;static DEFINE_MUTEX (irq_vector_mutex);
@@ -36,6 +39,8 @@ static void switch_idt(void *arg)int trace_irq_vector_regfunc (void ) { +static_branch_inc (&trace_irqvectors_key); +mutex_lock (&irq_vector_mutex);if (!trace_irq_vector_refcount) {set_trace_idt_ctr (1 );
@@ -49,6 +54,8 @@ int trace_irq_vector_regfunc(void)void trace_irq_vector_unregfunc (void ) { +static_branch_dec (&trace_irqvectors_key); +mutex_lock (&irq_vector_mutex); trace_irq_vector_refcount--;if (!trace_irq_vector_refcount) {
Re: [patch 05/41] x86/tracing: Introduce a static key for exception tracing
arch/x86/include/asm/trace/common.h
Quoted 19 lines · On Fri, 25 Aug 2017 12:31:08 +0200 Thomas Gleixner <[email protected]> wrote:
Switching the IDT just for avoiding tracepoints creates a complete impenetrable macro/inline/ifdef mess.
There is no point in avoiding tracepoints for most of the traps/exceptions. For the more expensive tracepoints, like pagefaults, this can be handled with an explicit static key.
Preparatory patch to remove the tracing idt.
Signed-off-by Thomas Gleixner <[email protected]>--- arch/x86/include/asm/trace/common.h | 15 +++++++++++++++ arch/x86/include/asm/trace/exceptions.h | 4 +--- arch/x86/include/asm/trace/irq_vectors.h | 4 +--- arch/x86/kernel/tracepoint.c | 9 ++++++++- 4 files changed, 25 insertions(+), 7 deletions(-)arch/x86/include/asm/trace/common.h new file +0
-0
-- Steve
PATCH 6/41 x86/traps: Simplify pagefault tracing logic
In reply to Thomas GleixnerMake use of the new irqvector tracing static key and remove the duplicated trace_do_pagefault() implementation.
If irq vector tracing is disabled, then the overhead of this is a single NOP5, which is a reasonable tradeoff to avoid duplicated code and the unholy macro mess.
--- arch/x86/entry/entry_32.S | 8 ------- arch/x86/entry/entry_64.S | 13 ----------- arch/x86/include/asm/traps.h | 10 --------- arch/x86/kernel/kvm.c | 2 - arch/x86/mm/fault.c | 47 ++++++++++--------------------------------- 5 files changed, 15 insertions(+), 65 deletions(-)
arch/x86/entry/entry_32.S +0 -8
@@ -891,14 +891,6 @@ BUILD_INTERRUPT3(hyperv_callback_vector, #endif /* CONFIG_HYPERV */ -#ifdef CONFIG_TRACING -ENTRY(trace_page_fault) - ASM_CLAC - pushl $trace_do_page_fault - jmp common_exception -END(trace_page_fault) -#endif - ENTRY(page_fault) ASM_CLAC pushl $do_page_fault
arch/x86/entry/entry_64.S +1 -12
@@ -829,17 +829,6 @@ ENTRY(\sym) END(\sym) .endm -#ifdef CONFIG_TRACING -.macro trace_idtentry sym do_sym has_error_code:req -idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code -idtentry \sym \do_sym has_error_code=\has_error_code -.endm -#else -.macro trace_idtentry sym do_sym has_error_code:req -idtentry \sym \do_sym has_error_code=\has_error_code -.endm -#endif - idtentry divide_error do_divide_error has_error_code=0 idtentry overflow do_overflow has_error_code=0 idtentry bounds do_bounds has_error_code=0
@@ -1004,7 +993,7 @@ idtentry xen_stack_segment do_stack_segm #endif idtentry general_protection do_general_protection has_error_code=1 -trace_idtentry page_fault do_page_fault has_error_code=1 +idtentry page_fault do_page_fault has_error_code=1 #ifdef CONFIG_KVM_GUEST idtentry async_page_fault do_async_page_fault has_error_code=1
arch/x86/include/asm/traps.h +1 -9
@@ -39,7 +39,6 @@ asmlinkage void machine_check(void); asmlinkage void simd_coprocessor_error(void);#ifdef CONFIG_TRACING -asmlinkage void trace_page_fault(void);#define trace_stack_segment stack_segment#define trace_divide_error divide_error#define trace_bounds bounds
@@ -54,6 +53,7 @@ asmlinkage void trace_page_fault(void);#define trace_alignment_check alignment_check#define trace_simd_coprocessor_error simd_coprocessor_error#define trace_async_page_fault async_page_fault +#define trace_page_fault page_fault#endif dotraplinkage void do_divide_error(struct pt_regs *, long);
@@ -74,14 +74,6 @@ asmlinkage struct pt_regs *sync_regs(str#endif dotraplinkage void do_general_protection(struct pt_regs *, long); dotraplinkage void do_page_fault(struct pt_regs *, unsigned long); -#ifdef CONFIG_TRACING -dotraplinkage void trace_do_page_fault(struct pt_regs *, unsigned long); -#else -static inline void trace_do_page_fault (struct pt_regs *regs,unsigned long error) -{ -do_page_fault (regs, error); -} -#endif dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long); dotraplinkage void do_coprocessor_error(struct pt_regs *, long); dotraplinkage void do_alignment_check(struct pt_regs *, long);
arch/x86/kernel/kvm.c +1 -1
@@ -263,7 +263,7 @@ do_async_page_fault(struct pt_regs *regsswitch (kvm_read_and_reset_pf_reason ()) {default : -trace_do_page_fault (regs, error_code); +do_page_fault (regs, error_code);break ;case KVM_PV_REASON_PAGE_NOT_PRESENT :/* page is swapped out by the host. */
arch/x86/mm/fault.c +12 -35
70 lines not on this page · raw message
Andy Lutomirski
maintainerRe: [patch 06/41] x86/traps: Simplify pagefault tracing logic
Quoted 6 lines · Thomas Gleixner
Make use of the new irqvector tracing static key and remove the duplicated
trace_do_pagefault()implementation.If irq vector tracing is disabled, then the overhead of this is a single NOP5, which is a reasonable tradeoff to avoid duplicated code and the unholy macro mess.
This is great. Thanks!
Re: [patch 06/41] x86/traps: Simplify pagefault tracing logic
In reply to Thomas GleixnerQuoted 15 lines · On Fri, 25 Aug 2017 12:31:09 +0200 Thomas Gleixner <[email protected]> wrote:
dotraplinkage void notrace
arch/x86/mm/fault.c +7
-5-trace_do_page_fault(struct pt_regs *regs, unsigned long error_code) +do_page_fault(struct pt_regs *regs, unsigned long error_code) { + unsigned long address = read_cr2(); /* Get the faulting address */ +enum ctx_state prev_state; +/* -* The exception_enter and tracepoint processing could -* trigger another page faults (user space callchain -* reading) and destroy the original cr2 value, so read -* the faulting address now. +* We must have this function tagged with __kprobes, notrace and call +* read_cr2() before calling anything else. To avoid calling any kind +* of tracing machinery before we've observed the CR2 value.
arch/x86/mm/fault.c trace_page_fault_entries(unsigned long a · line 1537
Quoted 10 lines
arch/x86/mm/fault.c +4
-3+* +* exception_{enter,exit}() contain all sorts of tracepoints. */ -unsigned long address =read_cr2 (); -enum ctx_state prev_state; +if (trace_irqvectors_enabled ()) +trace_page_fault_entries (address, regs, error_code); prev_state =exception_enter (); -trace_page_fault_entries (address, regs, error_code);
I believe you need to keep the tracing after the "exception_enter()", as for NO_HZ_FULL, that enables RCU again, and the tracepoint needs RCU enabled.
-- Steve
Quoted 7 lines
arch/x86/mm/fault.c +1
-2__do_page_fault (regs, error_code, address);exception_exit (prev_state); } -NOKPROBE_SYMBOL (trace_do_page_fault); -#endif /* CONFIG_TRACING */ +NOKPROBE_SYMBOL (do_page_fault);
Re: [patch 06/41] x86/traps: Simplify pagefault tracing logic
Quoted 26 lines · Steven Rostedt
Quoted 23 lines · On Fri, 25 Aug 2017 12:31:09 +0200 Thomas Gleixner <[email protected]> wrote:
dotraplinkage void notrace
arch/x86/mm/fault.c +11
-7-trace_do_page_fault(struct pt_regs *regs, unsigned long error_code) +do_page_fault(struct pt_regs *regs, unsigned long error_code) { + unsigned long address = read_cr2(); /* Get the faulting address */ +enum ctx_state prev_state; +/* -* The exception_enter and tracepoint processing could -* trigger another page faults (user space callchain -* reading) and destroy the original cr2 value, so read -* the faulting address now. +* We must have this function tagged with __kprobes, notrace and call +* read_cr2() before calling anything else. To avoid calling any kind +* of tracing machinery before we've observed the CR2 value. +* +* exception_{enter,exit}() contain all sorts of tracepoints. */ -unsigned long address =read_cr2 (); -enum ctx_state prev_state; +if (trace_irqvectors_enabled ()) +trace_page_fault_entries (address, regs, error_code);
Quoted 6 lines
arch/x86/mm/fault.c trace_page_fault_entries(unsigned long a · line 1537
Quoted 2 lines
arch/x86/mm/fault.c +0
-1prev_state =exception_enter (); -trace_page_fault_entries (address, regs, error_code);I believe you need to keep the tracing after the "
exception_enter()", as forNO_HZ_FULL, that enables RCU again, and the tracepoint needs RCU enabled.
Indeed. Thanks for spotting it.
PATCH 7/41 x86/apic: Remove the duplicated tracing version of local_timer_interrupt
In reply to Thomas GleixnerThe two NOP5 are noise in the rest of the work which is done by the timer interrupt and modern CPUs are pretty good in optimizing nops.
Get rid of the interrupt handler duplication and move the tracepoints into the regular handler.
--- arch/x86/include/asm/hw_irq.h | 2 +- arch/x86/kernel/apic/apic.c | 19 ------------------- 2 files changed, 1 insertion(+), 20 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
@@ -48,7 +48,6 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_apic_timer_interrupt (void );extern void trace_x86_platform_ipi (void );extern void trace_error_interrupt (void );extern void trace_irq_work_interrupt (void );
@@ -59,6 +58,7 @@ extern void trace_threshold_interrupt(voextern void trace_deferred_error_interrupt (void );extern void trace_call_function_interrupt (void );extern void trace_call_function_single_interrupt (void ); +#define trace_apic_timer_interrupt apic_timer_interrupt#define trace_irq_move_cleanup_interrupt irq_move_cleanup_interrupt#define trace_reboot_interrupt reboot_interrupt#define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi
arch/x86/kernel/apic/apic.c +0 -19
@@ -1040,25 +1040,6 @@ static void local_apic_timer_interrupt(v* interrupt lock, which is the WrongThing (tm) to do. */ entering_ack_irq (); -local_apic_timer_interrupt (); -exiting_irq (); - -set_irq_regs (old_regs); -} - -__visible void __irq_entry smp_trace_apic_timer_interrupt(struct pt_regs *regs) -{ -struct pt_regs *old_regs =set_irq_regs (regs); - -/* -* NOTE! We'd better ACK the irq immediately, -* because timer handling can be slow. -* -* update_process_times() expects us to have done irq_enter(). -* Besides, if we don't timer interrupts ignore the global -* interrupt lock, which is the WrongThing (tm) to do. -*/ -entering_ack_irq ();trace_local_timer_entry (LOCAL_TIMER_VECTOR );local_apic_timer_interrupt ();trace_local_timer_exit (LOCAL_TIMER_VECTOR );
Re: [patch 07/41] x86/apic: Remove the duplicated tracing version of local_timer_interrupt
Quoted 7 lines · On Fri, 25 Aug 2017 12:31:10 +0200 Thomas Gleixner <[email protected]> wrote:
The two NOP5 are noise in the rest of the work which is done by the timer interrupt and modern CPUs are pretty good in optimizing nops.
Get rid of the interrupt handler duplication and move the tracepoints into the regular handler.
Signed-off-by Thomas Gleixner <[email protected]>
-- Steve
PATCH 8/41 x86/apic: Use this_cpu_ptr in local_timer_interrupt
In reply to Thomas GleixnerAccessing the per cpu data via per_cpu(, smp_processor_id()) is pointless. Use this_cpu_ptr() instead.
--- arch/x86/kernel/apic/apic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/kernel/apic/apic.c +3 -3
@@ -990,8 +990,7 @@ void setup_secondary_APIC_clock(void)*/ static void local_apic_timer_interrupt (void ) { -int cpu =smp_processor_id (); -struct clock_event_device *evt = &per_cpu (lapic_events, cpu); +struct clock_event_device *evt =this_cpu_ptr (&lapic_events);/* * Normally we should not be here till LAPIC has been initialized but
@@ -1005,7 +1004,8 @@ static void local_apic_timer_interrupt(v* spurious. */ if (!evt->event_handler) { -pr_warning ("Spurious LAPIC timer interrupt on cpu %d\n" , cpu); +pr_warning ("Spurious LAPIC timer interrupt on cpu %d\n" , +smp_processor_id ());/* Switch it off */ lapic_timer_shutdown (evt);return ;
PATCH 9/41 x86/irq: Get rid of duplicated trace_x86_platform_ipi() code
In reply to Thomas GleixnerTwo NOP5 are really a good tradeoff vs. the unholy IDT switching mess, which duplicates code all over the place.
--- arch/x86/include/asm/hw_irq.h | 2 +- arch/x86/kernel/irq.c | 25 +++++-------------------- 2 files changed, 6 insertions(+), 21 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
@@ -48,7 +48,6 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_x86_platform_ipi (void );extern void trace_error_interrupt (void );extern void trace_irq_work_interrupt (void );extern void trace_spurious_interrupt (void );
@@ -58,6 +57,7 @@ extern void trace_threshold_interrupt(voextern void trace_deferred_error_interrupt (void );extern void trace_call_function_interrupt (void );extern void trace_call_function_single_interrupt (void ); +#define trace_x86_platform_ipi x86_platform_ipi#define trace_apic_timer_interrupt apic_timer_interrupt#define trace_irq_move_cleanup_interrupt irq_move_cleanup_interrupt#define trace_reboot_interrupt reboot_interrupt
arch/x86/kernel/irq.c +5 -20
@@ -262,20 +262,16 @@ u64 arch_irq_stat(void)/* * Handler for X86_PLATFORM_IPI_VECTOR. */ -void __smp_x86_platform_ipi (void ) -{ -inc_irq_stat (x86_platform_ipis); - -if (x86_platform_ipi_callback) -x86_platform_ipi_callback (); -} - __visible void __irq_entry smp_x86_platform_ipi(struct pt_regs *regs) {struct pt_regs *old_regs =set_irq_regs (regs);entering_ack_irq (); -__smp_x86_platform_ipi (); +trace_x86_platform_ipi_entry (X86_PLATFORM_IPI_VECTOR ); +inc_irq_stat (x86_platform_ipis); +if (x86_platform_ipi_callback) +x86_platform_ipi_callback (); +trace_x86_platform_ipi_exit (X86_PLATFORM_IPI_VECTOR );exiting_irq ();set_irq_regs (old_regs); }
@@ -334,17 +330,6 @@ EXPORT_SYMBOL_GPL(kvm_set_posted_intr_wa }#endif -__visible void __irq_entry smp_trace_x86_platform_ipi(struct pt_regs *regs) -{ -struct pt_regs *old_regs =set_irq_regs (regs); - -entering_ack_irq (); -trace_x86_platform_ipi_entry (X86_PLATFORM_IPI_VECTOR ); -__smp_x86_platform_ipi (); -trace_x86_platform_ipi_exit (X86_PLATFORM_IPI_VECTOR ); -exiting_irq (); -set_irq_regs (old_regs); -}#ifdef CONFIG_HOTPLUG_CPU
Re: [patch 09/41] x86/irq: Get rid of duplicated trace_x86_platform_ipi() code
Quoted 4 lines · On Fri, 25 Aug 2017 12:31:12 +0200 Thomas Gleixner <[email protected]> wrote:
Two NOP5 are really a good tradeoff vs. the unholy IDT switching mess, which duplicates code all over the place.
Signed-off-by Thomas Gleixner <[email protected]>
-- Steve
Quoted 5 lines
--- arch/x86/include/asm/hw_irq.h | 2 +- arch/x86/kernel/irq.c | 25 +++++-------------------- 2 files changed, 6 insertions(+), 21 deletions(-)
PATCH 10/41 x86/apic: Remove the duplicated tracing versions of interrupts
In reply to Thomas GleixnerThe error and the spurious interrupt are really rare events and not at all so performance sensitive that two NOP5s can not be tolerated when tracing is disabled.
Remove the nonsense.
--- arch/x86/include/asm/hw_irq.h | 4 +-- arch/x86/kernel/apic/apic.c | 43 +++++++++--------------------------------- 2 files changed, 12 insertions(+), 35 deletions(-)
arch/x86/include/asm/hw_irq.h +2 -2
@@ -48,15 +48,15 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_error_interrupt (void );extern void trace_irq_work_interrupt (void ); -extern void trace_spurious_interrupt (void );extern void trace_thermal_interrupt (void );extern void trace_reschedule_interrupt (void );extern void trace_threshold_interrupt (void );extern void trace_deferred_error_interrupt (void );extern void trace_call_function_interrupt (void );extern void trace_call_function_single_interrupt (void ); +#define trace_error_interrupt error_interrupt +#define trace_spurious_interrupt spurious_interrupt#define trace_x86_platform_ipi x86_platform_ipi#define trace_apic_timer_interrupt apic_timer_interrupt#define trace_irq_move_cleanup_interrupt irq_move_cleanup_interrupt
arch/x86/kernel/apic/apic.c +10 -33
78 lines not on this page · raw message
Re: [patch 10/41] x86/apic: Remove the duplicated tracing versions of interrupts
Quoted 3 lines · On Fri, 25 Aug 2017 12:31:13 +0200 Thomas Gleixner <[email protected]> wrote:
The error and the spurious interrupt are really rare events and not at all so performance sensitive that two NOP5s can not be tolerated when tracing is disabled.
Just a note. I'm sure if we disassembled it, it may be a little more work done than just two NOPs, as parameter passing to the tracepoints sometimes leak out of the static jump block. It's moot on this patch, but other irqs with fast paths may need to be looked at.
Quoted 9 lines
Remove the nonsense.
Signed-off-by Thomas Gleixner <[email protected]>--- arch/x86/include/asm/hw_irq.h | 4 +-- arch/x86/kernel/apic/apic.c | 43 +++++++++--------------------------------- 2 files changed, 12 insertions(+), 35 deletions(-)
-- Steve
Peter Zijlstra
maintainerRe: [patch 10/41] x86/apic: Remove the duplicated tracing versions of interrupts
Quoted 11 lines · Steven Rostedt
Quoted 3 lines · On Fri, 25 Aug 2017 12:31:13 +0200 Thomas Gleixner <[email protected]> wrote:
The error and the spurious interrupt are really rare events and not at all so performance sensitive that two NOP5s can not be tolerated when tracing is disabled.
Just a note. I'm sure if we disassembled it, it may be a little more work done than just two NOPs, as parameter passing to the tracepoints sometimes leak out of the static jump block. It's moot on this patch, but other irqs with fast paths may need to be looked at.
Is that something we can fix with the trace macros?
They have a general shape of:
#define trace_foo(args...)
if (static_branch_unlikely(&foo_enabled)) {
__trace_foo(args...);
}Right? And I suppose I see why the compiler would want to sometimes lift stuff out of the branch block, but we'd really like it not to do that. Would putting a barrier() in front of __trace_foo() help?
PATCH 11/41 x86/irqwork: Get rid of duplicated tracing interrupt code
In reply to Thomas GleixnerTwo NOP5 are a reasonable tradeoff to avoid duplicated code and the requirement to switch the IDT.
--- arch/x86/include/asm/hw_irq.h | 2 +- arch/x86/kernel/irq_work.c | 16 ++-------------- 2 files changed, 3 insertions(+), 15 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
@@ -48,13 +48,13 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_irq_work_interrupt (void );extern void trace_thermal_interrupt (void );extern void trace_reschedule_interrupt (void );extern void trace_threshold_interrupt (void );extern void trace_deferred_error_interrupt (void );extern void trace_call_function_interrupt (void );extern void trace_call_function_single_interrupt (void ); +#define trace_irq_work_interrupt irq_work_interrupt#define trace_error_interrupt error_interrupt#define trace_spurious_interrupt spurious_interrupt#define trace_x86_platform_ipi x86_platform_ipi
arch/x86/kernel/irq_work.c +2 -14
@@ -11,24 +11,12 @@#include <asm/trace/irq_vectors.h> #include <linux/interrupt.h> -static inline void __smp_irq_work_interrupt (void ) -{ -inc_irq_stat (apic_irq_work_irqs); -irq_work_run (); -} - __visible void __irq_entry smp_irq_work_interrupt(struct pt_regs *regs) {ipi_entering_ack_irq (); -__smp_irq_work_interrupt (); -exiting_irq (); -} - -__visible void __irq_entry smp_trace_irq_work_interrupt(struct pt_regs *regs) -{ -ipi_entering_ack_irq (); +inc_irq_stat (apic_irq_work_irqs);trace_irq_work_entry (IRQ_WORK_VECTOR ); -__smp_irq_work_interrupt (); +irq_work_run ();trace_irq_work_exit (IRQ_WORK_VECTOR );exiting_irq (); }
Re: [patch 11/41] x86/irqwork: Get rid of duplicated tracing interrupt code
Quoted 15 lines · On Fri, 25 Aug 2017 12:31:14 +0200 Thomas Gleixner <[email protected]> wrote:
arch/x86/kernel/irq_work.c +0
-6@@ -11,24 +11,12 @@#include <asm/trace/irq_vectors.h> #include <linux/interrupt.h> -static inline void __smp_irq_work_interrupt (void ) -{ -inc_irq_stat (apic_irq_work_irqs); -irq_work_run (); -} - __visible void __irq_entry smp_irq_work_interrupt(struct pt_regs *regs) {ipi_entering_ack_irq ();
arch/x86/kernel/irq_work.c line 31
Quoted 10 lines
arch/x86/kernel/irq_work.c +1
-8-__smp_irq_work_interrupt (); -exiting_irq (); -} - -__visible void __irq_entry smp_trace_irq_work_interrupt(struct pt_regs *regs) -{ -ipi_entering_ack_irq (); +inc_irq_stat (apic_irq_work_irqs);trace_irq_work_entry (IRQ_WORK_VECTOR ); -__smp_irq_work_interrupt ();
This changes from what we use to have:
Original:
ipi_entering_ack_irq(); trace_irq_work_entry(IRQ_WORK_VECTOR); inc_irq_stat(apic_irq_work_irqs); irq_work_run();
Patched:
ipi_entering_ack_irq(); inc_irq_stat(apic_irq_work_irqs); trace_irq_work_entry(IRQ_WORK_VECTOR); irq_work_run();
Is there a reason for the swap? It's not mentioned in the change log.
Also, tracepoints can issue new irq works. I don't think that would be a problem here, as interrupts are disabled in this path. Just wanted to point it out.
-- Steve
Quoted 5 lines
arch/x86/kernel/irq_work.c +1
-0+irq_work_run ();trace_irq_work_exit (IRQ_WORK_VECTOR );exiting_irq (); }
PATCH 12/41 x86/mce: Remove duplicated tracing interrupt code
In reply to Thomas GleixnerMachine checks are not really high frequency events. The extra two NOP5 for the disabled tracepoints are noise vs. the heavy lifting which needs to be done in the MCE handler.
--- arch/x86/include/asm/hw_irq.h | 6 +++--- arch/x86/kernel/cpu/mcheck/mce_amd.c | 16 ++-------------- arch/x86/kernel/cpu/mcheck/therm_throt.c | 20 +++----------------- arch/x86/kernel/cpu/mcheck/threshold.c | 16 ++-------------- 4 files changed, 10 insertions(+), 48 deletions(-)
arch/x86/include/asm/hw_irq.h +3 -3
@@ -48,12 +48,12 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_thermal_interrupt (void );extern void trace_reschedule_interrupt (void ); -extern void trace_threshold_interrupt (void ); -extern void trace_deferred_error_interrupt (void );extern void trace_call_function_interrupt (void );extern void trace_call_function_single_interrupt (void ); +#define trace_thermal_interrupt thermal_interrupt +#define trace_threshold_interrupt threshold_interrupt +#define trace_deferred_error_interrupt deferred_error_interrupt#define trace_irq_work_interrupt irq_work_interrupt#define trace_error_interrupt error_interrupt#define trace_spurious_interrupt spurious_interrupt
arch/x86/kernel/cpu/mcheck/mce_amd.c +2 -14
@@ -776,24 +776,12 @@ static void __log_error(unsigned int banmce_log (&m); } -static inline void __smp_deferred_error_interrupt (void ) -{ -inc_irq_stat (irq_deferred_error_count); -deferred_error_int_vector (); -} - asmlinkage __visible void __irq_entry smp_deferred_error_interrupt(void) {entering_irq (); -__smp_deferred_error_interrupt (); -exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry smp_trace_deferred_error_interrupt(void) -{ -entering_irq ();trace_deferred_error_apic_entry (DEFERRED_ERROR_VECTOR ); -__smp_deferred_error_interrupt (); +inc_irq_stat (irq_deferred_error_count); +deferred_error_int_vector ();trace_deferred_error_apic_exit (DEFERRED_ERROR_VECTOR );exiting_ack_irq (); }
arch/x86/kernel/cpu/mcheck/therm_throt.c +3 -17
@@ -390,26 +390,12 @@ static void unexpected_thermal_interruptstatic void (*smp_thermal_vector)(void ) = unexpected_thermal_interrupt; -static inline void __smp_thermal_interrupt (void ) -{ -inc_irq_stat (irq_thermal_count); -smp_thermal_vector (); -} - -asmlinkage __visible void __irq_entry -smp_thermal_interrupt (struct pt_regs *regs) -{ -entering_irq (); -__smp_thermal_interrupt (); -exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry -smp_trace_thermal_interrupt (struct pt_regs *regs) +asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r) {entering_irq (); +inc_irq_stat (irq_thermal_count);trace_thermal_apic_entry (THERMAL_APIC_VECTOR ); -__smp_thermal_interrupt (); +smp_thermal_vector ();trace_thermal_apic_exit (THERMAL_APIC_VECTOR );exiting_ack_irq (); }
arch/x86/kernel/cpu/mcheck/threshold.c +2 -14
@@ -17,24 +17,12 @@ static void default_threshold_interrupt(void (*mce_threshold_vector)(void ) = default_threshold_interrupt; -static inline void __smp_threshold_interrupt (void ) -{ -inc_irq_stat (irq_threshold_count); -mce_threshold_vector (); -} - asmlinkage __visible void __irq_entry smp_threshold_interrupt(void) {entering_irq (); -__smp_threshold_interrupt (); -exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry smp_trace_threshold_interrupt(void) -{ -entering_irq ();trace_threshold_apic_entry (THRESHOLD_APIC_VECTOR ); -__smp_threshold_interrupt (); +inc_irq_stat (irq_threshold_count); +mce_threshold_vector ();trace_threshold_apic_exit (THRESHOLD_APIC_VECTOR );exiting_ack_irq (); }
Re: [patch 12/41] x86/mce: Remove duplicated tracing interrupt code
Quoted 15 lines · On Fri, 25 Aug 2017 12:31:15 +0200 Thomas Gleixner <[email protected]> wrote:
arch/x86/kernel/cpu/mcheck/mce_amd.c +0
-6@@ -776,24 +776,12 @@ static void __log_error(unsigned int banmce_log (&m); } -static inline void __smp_deferred_error_interrupt (void ) -{ -inc_irq_stat (irq_deferred_error_count); -deferred_error_int_vector (); -} - asmlinkage __visible void __irq_entry smp_deferred_error_interrupt(void) {entering_irq ();
arch/x86/kernel/cpu/mcheck/mce_amd.c static void __log_error(unsigned int ban · line 783
Quoted 10 lines
arch/x86/kernel/cpu/mcheck/mce_amd.c +1
-8-__smp_deferred_error_interrupt (); -exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry smp_trace_deferred_error_interrupt(void) -{ -entering_irq ();trace_deferred_error_apic_entry (DEFERRED_ERROR_VECTOR ); -__smp_deferred_error_interrupt (); +inc_irq_stat (irq_deferred_error_count);
Here we do the inc_irq_stat() after the tracepoint (same as the original).
Quoted 21 lines
arch/x86/kernel/cpu/mcheck/mce_amd.c +1
-0+deferred_error_int_vector ();trace_deferred_error_apic_exit (DEFERRED_ERROR_VECTOR );exiting_ack_irq (); }arch/x86/kernel/cpu/mcheck/therm_throt.c +0
-11@@ -390,26 +390,12 @@ static void unexpected_thermal_interruptstatic void (*smp_thermal_vector)(void ) = unexpected_thermal_interrupt; -static inline void __smp_thermal_interrupt (void ) -{ -inc_irq_stat (irq_thermal_count); -smp_thermal_vector (); -} - -asmlinkage __visible void __irq_entry -smp_thermal_interrupt (struct pt_regs *regs) -{ -entering_irq (); -__smp_thermal_interrupt ();
arch/x86/kernel/cpu/mcheck/therm_throt.c static void unexpected_thermal_interrupt · line 397
Quoted 10 lines
arch/x86/kernel/cpu/mcheck/therm_throt.c +2
-5-exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry -smp_trace_thermal_interrupt (struct pt_regs *regs) +asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r) {entering_irq (); +inc_irq_stat (irq_thermal_count);trace_thermal_apic_entry (THERMAL_APIC_VECTOR );
Here we do the inc_irq_stat() after the tracepoint (swapped from the original). Was that intentional?
Quoted 20 lines
arch/x86/kernel/cpu/mcheck/therm_throt.c +1
-1-__smp_thermal_interrupt (); +smp_thermal_vector ();trace_thermal_apic_exit (THERMAL_APIC_VECTOR );exiting_ack_irq (); }arch/x86/kernel/cpu/mcheck/threshold.c +0
-6@@ -17,24 +17,12 @@ static void default_threshold_interrupt(void (*mce_threshold_vector)(void ) = default_threshold_interrupt; -static inline void __smp_threshold_interrupt (void ) -{ -inc_irq_stat (irq_threshold_count); -mce_threshold_vector (); -} - asmlinkage __visible void __irq_entry smp_threshold_interrupt(void) {entering_irq ();
arch/x86/kernel/cpu/mcheck/threshold.c static void default_threshold_interrupt( · line 24
Quoted 10 lines
arch/x86/kernel/cpu/mcheck/threshold.c +1
-8-__smp_threshold_interrupt (); -exiting_ack_irq (); -} - -asmlinkage __visible void __irq_entry smp_trace_threshold_interrupt(void) -{ -entering_irq ();trace_threshold_apic_entry (THRESHOLD_APIC_VECTOR ); -__smp_threshold_interrupt (); +inc_irq_stat (irq_threshold_count);
Back to inc_irq_stat() after the tracepoint.
-- Steve
Quoted 5 lines
arch/x86/kernel/cpu/mcheck/threshold.c +1
-0+mce_threshold_vector ();trace_threshold_apic_exit (THRESHOLD_APIC_VECTOR );exiting_ack_irq (); }
Re: [patch 12/41] x86/mce: Remove duplicated tracing interrupt code
Quoted 8 lines · Steven Rostedt
arch/x86/kernel/cpu/mcheck/mce_amd.c static void __log_error(unsigned int ban · line 783
Quoted 3 lines · On Fri, 25 Aug 2017 12:31:15 +0200 Thomas Gleixner <[email protected]> wrote:
arch/x86/kernel/cpu/mcheck/mce_amd.c +1
-1trace_deferred_error_apic_entry (DEFERRED_ERROR_VECTOR ); -__smp_deferred_error_interrupt (); +inc_irq_stat (irq_deferred_error_count);Here we do the
inc_irq_stat()after the tracepoint (same as the original).
Quoted 6 lines
arch/x86/kernel/cpu/mcheck/therm_throt.c static void unexpected_thermal_interrupt · line 397
Quoted 3 lines
arch/x86/kernel/cpu/mcheck/therm_throt.c +1
-0entering_irq (); +inc_irq_stat (irq_thermal_count);trace_thermal_apic_entry (THERMAL_APIC_VECTOR );Here we do the
inc_irq_stat()after the tracepoint (swapped from the original). Was that intentional?
No. Not that it matters at all, but I can make it consistent everywhere.
PATCH 13/41 x86/smp: Remove pointless duplicated interrupt code
In reply to Thomas GleixnerTwo NOP5 are really a good tradeoff vs. the unholy IDT switching mess, which duplicates code all over the place. The rescheduling interrupt gets optimized in a later step.
--- arch/x86/include/asm/hw_irq.h | 4 +-- arch/x86/kernel/smp.c | 43 ++++++------------------------------------ 2 files changed, 9 insertions(+), 38 deletions(-)
arch/x86/include/asm/hw_irq.h +2 -2
@@ -49,8 +49,8 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ extern void trace_reschedule_interrupt (void ); -extern void trace_call_function_interrupt (void ); -extern void trace_call_function_single_interrupt (void ); +#define trace_call_function_interrupt call_function_interrupt +#define trace_call_function_single_interrupt call_function_single_interrupt#define trace_thermal_interrupt thermal_interrupt#define trace_threshold_interrupt threshold_interrupt#define trace_deferred_error_interrupt deferred_error_interrupt
arch/x86/kernel/smp.c +7 -36
64 lines not on this page · raw message
Re: [patch 13/41] x86/smp: Remove pointless duplicated interrupt code
arch/x86/kernel/smp.c static inline void __smp_reschedule_inte · line 295
Quoted 4 lines · On Fri, 25 Aug 2017 12:31:16 +0200 Thomas Gleixner <[email protected]> wrote:
arch/x86/kernel/smp.c +0
-4-static inline void __smp_call_function_interrupt (void ) -{ -generic_smp_call_function_interrupt (); -inc_irq_stat (irq_call_count);
Interesting. The origin code calls the generic_smp_call_function_interrupt() and then calls inc_irq_stat(). Not sure it matters, but just stating this because...
Quoted 21 lines
}
__visiblevoid__irq_entrysmp_call_function_interrupt(struct pt_regs *regs){arch/x86/kernel/smp.c +0
-15ipi_entering_ack_irq (); -__smp_call_function_interrupt (); -exiting_irq (); -} - -__visible void __irq_entry -smp_trace_call_function_interrupt (struct pt_regs *regs) -{ -ipi_entering_ack_irq ();trace_call_function_entry (CALL_FUNCTION_VECTOR ); -__smp_call_function_interrupt (); -trace_call_function_exit (CALL_FUNCTION_VECTOR ); -exiting_irq (); -} - -static inline void __smp_call_function_single_interrupt (void ) -{
arch/x86/kernel/smp.c static inline void __smp_reschedule_inte · line 295
Quoted 10 lines
arch/x86/kernel/smp.c +1
-8-generic_smp_call_function_single_interrupt ();inc_irq_stat (irq_call_count); -} - -__visible void __irq_entry -smp_call_function_single_interrupt (struct pt_regs *regs) -{ -ipi_entering_ack_irq (); -__smp_call_function_single_interrupt (); +generic_smp_call_function_interrupt ();
here and
arch/x86/kernel/smp.c static inline void __smp_reschedule_inte · line 305
Quoted 13 lines
arch/x86/kernel/smp.c +4
-3+trace_call_function_exit (CALL_FUNCTION_VECTOR );exiting_irq (); } -__visible void __irq_entry -smp_trace_call_function_single_interrupt (struct pt_regs *regs) +__visible void __irq_entry smp_call_function_single_interrupt(struct pt_regs *r) {ipi_entering_ack_irq ();trace_call_function_single_entry (CALL_FUNCTION_SINGLE_VECTOR ); -__smp_call_function_single_interrupt (); +inc_irq_stat (irq_call_count); +generic_smp_call_function_single_interrupt ();
here, you reverse it.
Should at least be mentioned in the change log.
-- Steve
Quoted 4 lines
arch/x86/kernel/smp.c +0
-0trace_call_function_single_exit (CALL_FUNCTION_SINGLE_VECTOR );exiting_irq (); }
PATCH 14/41 x86/smp: Use static key for reschedule interrupt tracing
In reply to Thomas GleixnerIt's worth to avoid the extra irq_enter()/irq_exit() pair in the case that the reschedule interrupt tracepoints are disabled.
Use the static key which indicates that exception tracing is enabled. For now this key is global. It will be optimized in a later step.
--- arch/x86/include/asm/hw_irq.h | 2 +- arch/x86/kernel/smp.c | 40 ++++++++++++++++------------------------ 2 files changed, 17 insertions(+), 25 deletions(-)
arch/x86/include/asm/hw_irq.h +1 -1
@@ -48,7 +48,7 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_reschedule_interrupt (void ); +#define trace_reschedule_interrupt reschedule_interrupt#define trace_call_function_interrupt call_function_interrupt#define trace_call_function_single_interrupt call_function_single_interrupt#define trace_thermal_interrupt thermal_interrupt
arch/x86/kernel/smp.c +16 -24
@@ -254,37 +254,29 @@ static void native_stop_other_cpus(int w }/* -* Reschedule call back. +* Reschedule call back. KVM uses this interrupt to force a cpu out of +* guest mode */ -static inline void __smp_reschedule_interrupt (void ) -{ -inc_irq_stat (irq_resched_count); -scheduler_ipi (); -} - __visible void __irq_entry smp_reschedule_interrupt(struct pt_regs *regs) {ack_APIC_irq (); -__smp_reschedule_interrupt (); -/* -* KVM uses this interrupt to force a cpu out of guest mode -*/ -} -__visible void __irq_entry smp_trace_reschedule_interrupt(struct pt_regs *regs) -{ -/* -* Need to call irq_enter() before calling the trace point. -* __smp_reschedule_interrupt() calls irq_enter/exit() too (in -* scheduler_ipi(). This is OK, since those functions are allowed -* to nest. -*/ -ipi_entering_ack_irq (); -trace_reschedule_entry (RESCHEDULE_VECTOR ); +if (trace_irqvectors_enabled ()) { +/* +* scheduler_ipi() might call irq_enter() as well, but +* nested calls are fine. +*/ +irq_enter (); +trace_reschedule_entry (RESCHEDULE_VECTOR ); + } +inc_irq_stat (irq_resched_count);scheduler_ipi (); -trace_reschedule_exit (RESCHEDULE_VECTOR ); -exiting_irq (); + +if (trace_irqvectors_enabled ()) { +trace_reschedule_exit (RESCHEDULE_VECTOR ); +irq_exit (); + } } __visible void __irq_entry smp_call_function_interrupt(struct pt_regs *regs)
Re: [patch 14/41] x86/smp: Use static key for reschedule interrupt tracing
Quoted 17 lines · On Fri, 25 Aug 2017 12:31:17 +0200 Thomas Gleixner <[email protected]> wrote:
arch/x86/kernel/smp.c +7
-10-__visible void __irq_entry smp_trace_reschedule_interrupt(struct pt_regs *regs) -{ -/* -* Need to call irq_enter() before calling the trace point. -* __smp_reschedule_interrupt() calls irq_enter/exit() too (in -* scheduler_ipi(). This is OK, since those functions are allowed -* to nest. -*/ -ipi_entering_ack_irq (); -trace_reschedule_entry (RESCHEDULE_VECTOR ); +if (trace_irqvectors_enabled ()) { +/* +* scheduler_ipi() might call irq_enter() as well, but +* nested calls are fine. +*/ +irq_enter (); +trace_reschedule_entry (RESCHEDULE_VECTOR );
arch/x86/kernel/smp.c static void native_stop_other_cpus(int w · line 278
Quoted 10 lines
arch/x86/kernel/smp.c +6
-2+ } +inc_irq_stat (irq_resched_count);scheduler_ipi (); -trace_reschedule_exit (RESCHEDULE_VECTOR ); -exiting_irq (); + +if (trace_irqvectors_enabled ()) { +trace_reschedule_exit (RESCHEDULE_VECTOR ); +irq_exit ();
This is racy. If the static key gets changed on one and not the other, we lose the irq_enter/irq_exit match.
-- Steve
Quoted 5 lines
arch/x86/kernel/smp.c +1
-0+ } } __visible void __irq_entry smp_call_function_interrupt(struct pt_regs *regs)
Re: [patch 14/41] x86/smp: Use static key for reschedule interrupt tracing
Quoted 26 lines · Steven Rostedt
Quoted 22 lines · On Fri, 25 Aug 2017 12:31:17 +0200 Thomas Gleixner <[email protected]> wrote:
(quoted diff) +9
-11-__visible void __irq_entry smp_trace_reschedule_interrupt(struct pt_regs *regs) -{ - /* - * Need to call irq_enter() before calling the trace point. - * __smp_reschedule_interrupt() calls irq_enter/exit() too (in - * scheduler_ipi(). This is OK, since those functions are allowed - * to nest. - */ - ipi_entering_ack_irq(); - trace_reschedule_entry(RESCHEDULE_VECTOR); + if (trace_irqvectors_enabled()) { + /* + * scheduler_ipi() might call irq_enter() as well, but + * nested calls are fine. + */ + irq_enter(); + trace_reschedule_entry(RESCHEDULE_VECTOR); + } + inc_irq_stat(irq_resched_count); scheduler_ipi(); - trace_reschedule_exit(RESCHEDULE_VECTOR);
Quoted 8 lines
Review
Quoted 5 lines
(quoted diff) +4
-1- exiting_irq(); + + if (trace_irqvectors_enabled()) { + trace_reschedule_exit(RESCHEDULE_VECTOR); + irq_exit();This is racy. If the static key gets changed on one and not the other, we lose the irq_enter/irq_exit match.
Indeed. Good point. Fixed up version below.
Thanks,
tglx
8<---------------------
arch/x86/include/asm/hw_irq.h +1 -1
@@ -48,7 +48,7 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_reschedule_interrupt (void ); +#define trace_reschedule_interrupt reschedule_interrupt#define trace_call_function_interrupt call_function_interrupt#define trace_call_function_single_interrupt call_function_single_interrupt#define trace_thermal_interrupt thermal_interrupt
arch/x86/kernel/smp.c +15 -25
@@ -254,37 +254,27 @@ static void native_stop_other_cpus(int w }/* -* Reschedule call back. +* Reschedule call back. KVM uses this interrupt to force a cpu out of +* guest mode */ -static inline void __smp_reschedule_interrupt (void ) -{ -inc_irq_stat (irq_resched_count); -scheduler_ipi (); -} - __visible void __irq_entry smp_reschedule_interrupt(struct pt_regs *regs) {ack_APIC_irq (); -__smp_reschedule_interrupt (); -/* -* KVM uses this interrupt to force a cpu out of guest mode -*/ -} - -__visible void __irq_entry smp_trace_reschedule_interrupt(struct pt_regs *regs) -{ -/* -* Need to call irq_enter() before calling the trace point. -* __smp_reschedule_interrupt() calls irq_enter/exit() too (in -* scheduler_ipi(). This is OK, since those functions are allowed -* to nest. -*/ -ipi_entering_ack_irq (); -trace_reschedule_entry (RESCHEDULE_VECTOR );inc_irq_stat (irq_resched_count); + +if (trace_irqvectors_enabled ()) { +/* +* scheduler_ipi() might call irq_enter() as well, but +* nested calls are fine. +*/ +irq_enter (); +trace_reschedule_entry (RESCHEDULE_VECTOR ); +scheduler_ipi (); +trace_reschedule_exit (RESCHEDULE_VECTOR ); +irq_exit (); +return ; + }scheduler_ipi (); -trace_reschedule_exit (RESCHEDULE_VECTOR ); -exiting_irq (); } __visible void __irq_entry smp_call_function_interrupt(struct pt_regs *regs)
Steven Rostedt
Reviewed-byRe: [patch 14/41] x86/smp: Use static key for reschedule interrupt tracing
Quoted 2 lines · On Fri, 25 Aug 2017 22:07:33 +0200 (CEST) Thomas Gleixner <[email protected]>…
Fixed up version below.
-- Steve
Quoted 71 lines
Thanks,
tglx
8<---------------------arch/x86/include/asm/hw_irq.h +1
-1@@ -48,7 +48,7 @@ extern asmlinkage void call_function_sin#ifdef CONFIG_TRACING /* Interrupt handlers registered during init_IRQ */ -extern void trace_reschedule_interrupt (void ); +#define trace_reschedule_interrupt reschedule_interrupt#define trace_call_function_interrupt call_function_interrupt#define trace_call_function_single_interrupt call_function_single_interrupt#define trace_thermal_interrupt thermal_interruptarch/x86/kernel/smp.c +15
-25@@ -254,37 +254,27 @@ static void native_stop_other_cpus(int w }/* -* Reschedule call back. +* Reschedule call back. KVM uses this interrupt to force a cpu out of +* guest mode */ -static inline void __smp_reschedule_interrupt (void ) -{ -inc_irq_stat (irq_resched_count); -scheduler_ipi (); -} - __visible void __irq_entry smp_reschedule_interrupt(struct pt_regs *regs) {ack_APIC_irq (); -__smp_reschedule_interrupt (); -/* -* KVM uses this interrupt to force a cpu out of guest mode -*/ -} - -__visible void __irq_entry smp_trace_reschedule_interrupt(struct pt_regs *regs) -{ -/* -* Need to call irq_enter() before calling the trace point. -* __smp_reschedule_interrupt() calls irq_enter/exit() too (in -* scheduler_ipi(). This is OK, since those functions are allowed -* to nest. -*/ -ipi_entering_ack_irq (); -trace_reschedule_entry (RESCHEDULE_VECTOR );inc_irq_stat (irq_resched_count); + +if (trace_irqvectors_enabled ()) { +/* +* scheduler_ipi() might call irq_enter() as well, but +* nested calls are fine. +*/ +irq_enter (); +trace_reschedule_entry (RESCHEDULE_VECTOR ); +scheduler_ipi (); +trace_reschedule_exit (RESCHEDULE_VECTOR ); +irq_exit (); +return ; + }scheduler_ipi (); -trace_reschedule_exit (RESCHEDULE_VECTOR ); -exiting_irq (); } __visible void __irq_entry smp_call_function_interrupt(struct pt_regs *regs)
PATCH 15/41 x86/idt: Remove tracing idt completely
In reply to Thomas GleixnerNo more users of the tracing idt. All exception tracepoints have been moved into the regular handlers. Get rid of the mess which shouldn't have been created in the first place.
--- arch/x86/entry/entry_32.S | 12 ----- arch/x86/entry/entry_64.S | 13 ------ arch/x86/include/asm/desc.h | 82 ++------------------------------------ arch/x86/include/asm/entry_arch.h | 14 ++---- arch/x86/include/asm/hw_irq.h | 20 --------- arch/x86/include/asm/segment.h | 3 - arch/x86/kernel/tracepoint.c | 43 ------------------- arch/x86/kernel/traps.c | 6 -- 8 files changed, 14 insertions(+), 179 deletions(-)
arch/x86/entry/entry_32.S +2 -10
@@ -673,16 +673,8 @@ ENTRY(name) \ jmp ret_from_intr; \ ENDPROC(name) - -#ifdef CONFIG_TRACING -# define TRACE_BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name) -#else -# define TRACE_BUILD_INTERRUPT(name, nr) -#endif - #define BUILD_INTERRUPT(name, nr) \ BUILD_INTERRUPT3(name, nr, smp_##name); \ - TRACE_BUILD_INTERRUPT(name, nr) /* The include is where all of the SMP etc. interrupts come from */ #include <asm/entry_arch.h>
@@ -880,14 +872,14 @@ ENTRY(xen_failsafe_callback) ENDPROC(xen_failsafe_callback) BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, - xen_evtchn_do_upcall) + xen_evtchn_do_upcall) #endif /* CONFIG_XEN */ #if IS_ENABLED(CONFIG_HYPERV) BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR, - hyperv_vector_handler) + hyperv_vector_handler) #endif /* CONFIG_HYPERV */
arch/x86/entry/entry_64.S +0 -13
@@ -748,18 +748,6 @@ ENTRY(\sym) END(\sym) .endm -#ifdef CONFIG_TRACING -#define trace(sym) trace_##sym -#define smp_trace(sym) smp_trace_##sym - -.macro trace_apicinterrupt num sym -apicinterrupt3 \num trace(\sym) smp_trace(\sym) -.endm -#else -.macro trace_apicinterrupt num sym do_sym -.endm -#endif - /* Make sure APIC interrupt handlers end up in the irqentry section: */ #if defined(CONFIG_FUNCTION_GRAPH_TRACER) || defined(CONFIG_KASAN) # define PUSH_SECTION_IRQENTRY .pushsection .irqentry.text, "ax"
@@ -772,7 +760,6 @@ apicinterrupt3 \num trace(\sym) smp_trac .macro apicinterrupt num sym do_sym PUSH_SECTION_IRQENTRY apicinterrupt3 \num \sym \do_sym -trace_apicinterrupt \num \sym POP_SECTION_IRQENTRY .endm
arch/x86/include/asm/desc.h +6 -76
108 lines not on this page · raw message
arch/x86/include/asm/entry_arch.h +5 -9
@@ -13,20 +13,16 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) -BUILD_INTERRUPT3 (irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR , - smp_irq_move_cleanup_interrupt) -BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt) +BUILD_INTERRUPT(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR) +BUILD_INTERRUPT(reboot_interrupt, REBOOT_VECTOR)#endif BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)#ifdef CONFIG_HAVE_KVM -BUILD_INTERRUPT3 (kvm_posted_intr_ipi,POSTED_INTR_VECTOR , - smp_kvm_posted_intr_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_wakeup_ipi,POSTED_INTR_WAKEUP_VECTOR , - smp_kvm_posted_intr_wakeup_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_nested_ipi,POSTED_INTR_NESTED_VECTOR , - smp_kvm_posted_intr_nested_ipi) +BUILD_INTERRUPT(kvm_posted_intr_ipi, POSTED_INTR_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_nested_ipi, POSTED_INTR_NESTED_VECTOR)#endif /*
arch/x86/include/asm/hw_irq.h +0 -20
@@ -46,26 +46,6 @@ extern asmlinkage void deferred_error_in extern asmlinkage void call_function_interrupt(void); extern asmlinkage void call_function_single_interrupt(void); -#ifdef CONFIG_TRACING -/* Interrupt handlers registered during init_IRQ */ -#define trace_reschedule_interrupt reschedule_interrupt -#define trace_call_function_interrupt call_function_interrupt -#define trace_call_function_single_interrupt call_function_single_interrupt -#define trace_thermal_interrupt thermal_interrupt -#define trace_threshold_interrupt threshold_interrupt -#define trace_deferred_error_interrupt deferred_error_interrupt -#define trace_irq_work_interrupt irq_work_interrupt -#define trace_error_interrupt error_interrupt -#define trace_spurious_interrupt spurious_interrupt -#define trace_x86_platform_ipi x86_platform_ipi -#define trace_apic_timer_interrupt apic_timer_interrupt -#define trace_irq_move_cleanup_interrupt irq_move_cleanup_interrupt -#define trace_reboot_interrupt reboot_interrupt -#define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi -#define trace_kvm_posted_intr_wakeup_ipi kvm_posted_intr_wakeup_ipi -#define trace_kvm_posted_intr_nested_ipi kvm_posted_intr_nested_ipi -#endif /* CONFIG_TRACING */ -#ifdef CONFIG_X86_LOCAL_APIC struct irq_data ;struct pci_dev ;
arch/x86/include/asm/segment.h +0 -3
@@ -238,9 +238,6 @@#ifndef __ASSEMBLY__extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS ][EARLY_IDT_HANDLER_SIZE ]; -#ifdef CONFIG_TRACING -# define trace_early_idt_handler_array early_idt_handler_array -#endif /* * Load a segment. Fall back on loading the zero segment if something goes
arch/x86/kernel/tracepoint.c +0 -43
58 lines not on this page · raw message
arch/x86/kernel/traps.c +1 -5
@@ -939,12 +939,8 @@ void __init early_trap_init(void)* stack. Using the original stack works well enough at this * early stage. DEBUG_STACK will be equipped after cpu_init() in * trap_init(). -* -* We don't need to set trace_idt_table like set_intr_gate(), -* since we don't have trace_debug and it will be reset to -* 'debug' in trap_init() by set_intr_gate_ist(). */ -set_intr_gate_notrace (X86_TRAP_DB , debug); +set_intr_gate (X86_TRAP_DB , debug);/* int3 can be called from all */ set_system_intr_gate (X86_TRAP_BP , &int3);#ifdef CONFIG_X86_32
Re: [patch 15/41] x86/idt: Remove tracing idt completely
Quoted 32 lines · On Fri, 25 Aug 2017 12:31:18 +0200 Thomas Gleixner <[email protected]> wrote:
No more users of the tracing idt. All exception tracepoints have been moved into the regular handlers. Get rid of the mess which shouldn't have been created in the first place.
Signed-off-by Thomas Gleixner <[email protected]>--- arch/x86/entry/entry_32.S | 12 ----- arch/x86/entry/entry_64.S | 13 ------ arch/x86/include/asm/desc.h | 82 ++------------------------------------ arch/x86/include/asm/entry_arch.h | 14 ++---- arch/x86/include/asm/hw_irq.h | 20 --------- arch/x86/include/asm/segment.h | 3 - arch/x86/kernel/tracepoint.c | 43 ------------------- arch/x86/kernel/traps.c | 6 -- 8 files changed, 14 insertions(+), 179 deletions(-)arch/x86/include/asm/entry_arch.h +2
-3@@ -13,20 +13,16 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) -BUILD_INTERRUPT3 (irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR , - smp_irq_move_cleanup_interrupt) -BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt) +BUILD_INTERRUPT(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR) +BUILD_INTERRUPT(reboot_interrupt, REBOOT_VECTOR)#endif BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)#ifdef CONFIG_HAVE_KVM
arch/x86/include/asm/entry_arch.h line 26
Quoted 10 lines
arch/x86/include/asm/entry_arch.h +3
-6-BUILD_INTERRUPT3 (kvm_posted_intr_ipi,POSTED_INTR_VECTOR , - smp_kvm_posted_intr_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_wakeup_ipi,POSTED_INTR_WAKEUP_VECTOR , - smp_kvm_posted_intr_wakeup_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_nested_ipi,POSTED_INTR_NESTED_VECTOR , - smp_kvm_posted_intr_nested_ipi) +BUILD_INTERRUPT(kvm_posted_intr_ipi, POSTED_INTR_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_nested_ipi, POSTED_INTR_NESTED_VECTOR)#endif
This looks like a different change than what is specified in the change log. It looks like a clean up. Shouldn't it be a separate patch?
-- Steve
Re: [patch 15/41] x86/idt: Remove tracing idt completely
Quoted 34 lines · Steven Rostedt
Quoted 31 lines · On Fri, 25 Aug 2017 12:31:18 +0200 Thomas Gleixner <[email protected]> wrote:
No more users of the tracing idt. All exception tracepoints have been moved into the regular handlers. Get rid of the mess which shouldn't have been created in the first place.
Signed-off-by Thomas Gleixner <[email protected]>--- arch/x86/entry/entry_32.S | 12 ----- arch/x86/entry/entry_64.S | 13 ------ arch/x86/include/asm/desc.h | 82 ++------------------------------------ arch/x86/include/asm/entry_arch.h | 14 ++---- arch/x86/include/asm/hw_irq.h | 20 --------- arch/x86/include/asm/segment.h | 3 - arch/x86/kernel/tracepoint.c | 43 ------------------- arch/x86/kernel/traps.c | 6 -- 8 files changed, 14 insertions(+), 179 deletions(-)arch/x86/include/asm/entry_arch.h +2
-3@@ -13,20 +13,16 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) -BUILD_INTERRUPT3 (irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR , - smp_irq_move_cleanup_interrupt) -BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt) +BUILD_INTERRUPT(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR) +BUILD_INTERRUPT(reboot_interrupt, REBOOT_VECTOR)#endif BUILD_INTERRUPT (x86_platform_ipi,X86_PLATFORM_IPI_VECTOR )
Quoted 15 lines
arch/x86/include/asm/entry_arch.h line 26
Quoted 11 lines
arch/x86/include/asm/entry_arch.h +3
-6#ifdef CONFIG_HAVE_KVM -BUILD_INTERRUPT3 (kvm_posted_intr_ipi,POSTED_INTR_VECTOR , - smp_kvm_posted_intr_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_wakeup_ipi,POSTED_INTR_WAKEUP_VECTOR , - smp_kvm_posted_intr_wakeup_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_nested_ipi,POSTED_INTR_NESTED_VECTOR , - smp_kvm_posted_intr_nested_ipi) +BUILD_INTERRUPT(kvm_posted_intr_ipi, POSTED_INTR_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_nested_ipi, POSTED_INTR_NESTED_VECTOR)#endif This looks like a different change than what is specified in the change log. It looks like a clean up. Shouldn't it be a separate patch?
Let me split it up.
Re: [patch 15/41] x86/idt: Remove tracing idt completely
Quoted 51 lines · Thomas Gleixner
Quoted 34 lines · Steven Rostedt
Quoted 31 lines · On Fri, 25 Aug 2017 12:31:18 +0200 Thomas Gleixner <[email protected]> wrote:
No more users of the tracing idt. All exception tracepoints have been moved into the regular handlers. Get rid of the mess which shouldn't have been created in the first place.
Signed-off-by Thomas Gleixner <[email protected]>--- arch/x86/entry/entry_32.S | 12 ----- arch/x86/entry/entry_64.S | 13 ------ arch/x86/include/asm/desc.h | 82 ++------------------------------------ arch/x86/include/asm/entry_arch.h | 14 ++---- arch/x86/include/asm/hw_irq.h | 20 --------- arch/x86/include/asm/segment.h | 3 - arch/x86/kernel/tracepoint.c | 43 ------------------- arch/x86/kernel/traps.c | 6 -- 8 files changed, 14 insertions(+), 179 deletions(-)arch/x86/include/asm/entry_arch.h +2
-3@@ -13,20 +13,16 @@ BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) -BUILD_INTERRUPT3 (irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR , - smp_irq_move_cleanup_interrupt) -BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt) +BUILD_INTERRUPT(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR) +BUILD_INTERRUPT(reboot_interrupt, REBOOT_VECTOR)#endif BUILD_INTERRUPT (x86_platform_ipi,X86_PLATFORM_IPI_VECTOR )Quoted 15 lines
arch/x86/include/asm/entry_arch.h line 26
Quoted 11 lines
arch/x86/include/asm/entry_arch.h +3
-6#ifdef CONFIG_HAVE_KVM -BUILD_INTERRUPT3 (kvm_posted_intr_ipi,POSTED_INTR_VECTOR , - smp_kvm_posted_intr_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_wakeup_ipi,POSTED_INTR_WAKEUP_VECTOR , - smp_kvm_posted_intr_wakeup_ipi) -BUILD_INTERRUPT3 (kvm_posted_intr_nested_ipi,POSTED_INTR_NESTED_VECTOR , - smp_kvm_posted_intr_nested_ipi) +BUILD_INTERRUPT(kvm_posted_intr_ipi, POSTED_INTR_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR) +BUILD_INTERRUPT(kvm_posted_intr_nested_ipi, POSTED_INTR_NESTED_VECTOR)#endif This looks like a different change than what is specified in the change log. It looks like a clean up. Shouldn't it be a separate patch?
Quoted 1 line
Let me split it up.
OTOH, the BUILD_INTERRUPT3 users were explicit to avoid the TRACE_BUILD_INTERRUPT() extra which was hidden behind BUILD_INTERRUPT. So yes, it's a cleanup, but related.
Thanks,
tglx
PATCH 16/41 x86/tracing: Disentangle pagefault and resched IPI tracing key
In reply to Thomas GleixnerThe pagefault and the resched IPI handler are the only ones where it is worth to optimize the code further in case tracepoints are disabled. But it makes no sense to have a single static key for both.
Seperate the static keys so the facilities are handled seperately.
--- arch/x86/include/asm/trace/common.h | 15 ++++++++------- arch/x86/include/asm/trace/exceptions.h | 6 ++++-- arch/x86/include/asm/trace/irq_vectors.h | 22 ++++++++++++++++------ arch/x86/kernel/smp.c | 4 ++-- arch/x86/kernel/tracepoint.c | 27 ++++++++++++++++++++++----- arch/x86/mm/fault.c | 2 +- 6 files changed, 53 insertions(+), 23 deletions(-)
arch/x86/include/asm/trace/common.h +8 -7
@@ -1,15 +1,16 @@#ifndef _ASM_TRACE_COMMON_H#define _ASM_TRACE_COMMON_H -extern int trace_irq_vector_regfunc (void ); -extern void trace_irq_vector_unregfunc (void ); -#ifdef CONFIG_TRACING -DECLARE_STATIC_KEY_FALSE (trace_irqvectors_key); -#define trace_irqvectors_enabled () \ - static_branch_unlikely(&trace_irqvectors_key) +DECLARE_STATIC_KEY_FALSE (trace_pagefault_key); +#define trace_pagefault_enabled () \ + static_branch_unlikely(&trace_pagefault_key) +DECLARE_STATIC_KEY_FALSE (trace_resched_ipi_key); +#define trace_resched_ipi_enabled () \ + static_branch_unlikely(&trace_resched_ipi_key)#else -static inline bool trace_irqvectors_enabled (void ) {return false; } +static inline bool trace_pagefault_enabled (void ) {return false; } +static inline bool trace_resched_ipi_enabled (void ) {return false; }#endif #endif
arch/x86/include/asm/trace/exceptions.h +4 -2
@@ -7,6 +7,9 @@#include <linux/tracepoint.h> #include <asm/trace/common.h> +extern int trace_pagefault_reg (void ); +extern void trace_pagefault_unreg (void ); + DECLARE_EVENT_CLASS(x86_exceptions, TP_PROTO(unsigned long address, struct pt_regs *regs,
@@ -35,8 +38,7 @@ DEFINE_EVENT_FN(x86_exceptions, name, TP_PROTO(unsigned long address, struct pt_regs *regs, \ unsigned long error_code), \TP_ARGS (address, regs, error_code), \ - trace_irq_vector_regfunc, \ - trace_irq_vector_unregfunc); + trace_pagefault_reg, trace_pagefault_unreg);DEFINE_PAGE_FAULT_EVENT (page_fault_user);DEFINE_PAGE_FAULT_EVENT (page_fault_kernel);
arch/x86/include/asm/trace/irq_vectors.h +16 -6
@@ -7,6 +7,9 @@#include <linux/tracepoint.h> #include <asm/trace/common.h> +extern int trace_resched_ipi_reg (void ); +extern void trace_resched_ipi_unreg (void ); + DECLARE_EVENT_CLASS(x86_irq_vector, TP_PROTO(int vector),
@@ -26,15 +29,22 @@ DECLARE_EVENT_CLASS(x86_irq_vector,#define DEFINE_IRQ_VECTOR_EVENT (name) \ DEFINE_EVENT_FN(x86_irq_vector, name##_entry, \ TP_PROTO(int vector), \ + TP_ARGS(vector), NULL, NULL); \ +DEFINE_EVENT_FN(x86_irq_vector, name##_exit, \ + TP_PROTO(int vector), \ + TP_ARGS(vector), NULL, NULL); + +#define DEFINE_RESCHED_IPI_EVENT (name) \ +DEFINE_EVENT_FN(x86_irq_vector, name##_entry, \ + TP_PROTO(int vector), \ TP_ARGS(vector), \ - trace_irq_vector_regfunc, \ - trace_irq_vector_unregfunc); \ + trace_resched_ipi_reg, \ + trace_resched_ipi_unreg); \ DEFINE_EVENT_FN(x86_irq_vector, name##_exit, \ TP_PROTO(int vector), \ TP_ARGS(vector), \ - trace_irq_vector_regfunc, \ - trace_irq_vector_unregfunc); - + trace_resched_ipi_reg, \ + trace_resched_ipi_unreg);/* * local_timer - called when entering/exiting a local timer interrupt
@@ -45,7 +55,7 @@ DEFINE_IRQ_VECTOR_EVENT(local_timer);/* * reschedule - called when entering/exiting a reschedule vector handler */ -DEFINE_IRQ_VECTOR_EVENT (reschedule); +DEFINE_RESCHED_IPI_EVENT (reschedule);/* * spurious_apic - called when entering/exiting a spurious apic vector handler
arch/x86/kernel/smp.c +2 -2
@@ -261,7 +261,7 @@ static void native_stop_other_cpus(int w {ack_APIC_irq (); -if (trace_irqvectors_enabled ()) { +if (trace_resched_ipi_enabled ()) {/* * scheduler_ipi() might call irq_enter() as well, but * nested calls are fine.
@@ -273,7 +273,7 @@ static void native_stop_other_cpus(int winc_irq_stat (irq_resched_count);scheduler_ipi (); -if (trace_irqvectors_enabled ()) { +if (trace_resched_ipi_enabled ()) {trace_reschedule_exit (RESCHEDULE_VECTOR );irq_exit (); }
arch/x86/kernel/tracepoint.c +22 -5
@@ -10,15 +10,32 @@#include <asm/hw_irq.h> #include <asm/desc.h> -DEFINE_STATIC_KEY_FALSE (trace_irqvectors_key); +DEFINE_STATIC_KEY_FALSE (trace_pagefault_key); -int trace_irq_vector_regfunc (void ) +int trace_pagefault_reg (void ) { -static_branch_inc (&trace_irqvectors_key); +static_branch_inc (&trace_pagefault_key);return 0 ; } -void trace_irq_vector_unregfunc (void ) +void trace_pagefault_unreg (void ) { -static_branch_dec (&trace_irqvectors_key); +static_branch_dec (&trace_pagefault_key); } + +#ifdef CONFIG_SMP + +DEFINE_STATIC_KEY_FALSE (trace_resched_ipi_key); + +int trace_resched_ipi_reg (void ) +{ +static_branch_inc (&trace_resched_ipi_key); +return 0 ; +} + +void trace_resched_ipi_unreg (void ) +{ +static_branch_dec (&trace_resched_ipi_key); +} + +#endif
arch/x86/mm/fault.c +1 -1
@@ -1509,7 +1509,7 @@ do_page_fault(struct pt_regs *regs, unsi* * exception_{enter,exit}() contain all sorts of tracepoints. */ -if (trace_irqvectors_enabled ()) +if (trace_pagefault_enabled ())trace_page_fault_entries (address, regs, error_code); prev_state =exception_enter ();
PATCH 17/41 x86/idt: Unify gate_struct handling for 32/64bit
In reply to Thomas GleixnerThe first 32bits of gate struct are the same for 32 and 64 bit. The 32bit version uses desc_struct and no designated data structure, so we need different accessors for 32 and 64 bit. Aside of that the macros which are necessary to build the 32bit gate descriptor are horrible to read.
Unify the gate structs and switch all code fiddling with it over.
--- arch/x86/boot/compressed/eboot.c | 8 ++--- arch/x86/include/asm/desc.h | 45 +++++++++++++----------------- arch/x86/include/asm/desc_defs.h | 57 +++++++++++++++++++++++++-------------- arch/x86/kvm/vmx.c | 2 - arch/x86/xen/enlighten_pv.c | 12 ++++---- 5 files changed, 67 insertions(+), 57 deletions(-)
arch/x86/boot/compressed/eboot.c +4 -4
@@ -1058,7 +1058,7 @@ struct boot_params *efi_main(struct efi_ desc->s =DESC_TYPE_CODE_DATA ; desc->dpl =0 ; desc->p =1 ; - desc->limit =0xf ; + desc->limit1 =0xf ; desc->avl =0 ; desc->l =0 ; desc->d =SEG_OP_SIZE_32BIT ;
@@ -1078,7 +1078,7 @@ struct boot_params *efi_main(struct efi_ desc->s =DESC_TYPE_CODE_DATA ; desc->dpl =0 ; desc->p =1 ; - desc->limit =0xf ; + desc->limit1 =0xf ; desc->avl =0 ;if (IS_ENABLED (CONFIG_X86_64 )) { desc->l =1 ;
@@ -1099,7 +1099,7 @@ struct boot_params *efi_main(struct efi_ desc->s =DESC_TYPE_CODE_DATA ; desc->dpl =0 ; desc->p =1 ; - desc->limit =0xf ; + desc->limit1 =0xf ; desc->avl =0 ; desc->l =0 ; desc->d =SEG_OP_SIZE_32BIT ;
@@ -1116,7 +1116,7 @@ struct boot_params *efi_main(struct efi_ desc->s =0 ; desc->dpl =0 ; desc->p =1 ; - desc->limit =0x0 ; + desc->limit1 =0x0 ; desc->avl =0 ; desc->l =0 ; desc->d =0 ;
arch/x86/include/asm/desc.h +19 -26
72 lines not on this page · raw message
arch/x86/include/asm/desc_defs.h +37 -20
77 lines not on this page · raw message
arch/x86/kvm/vmx.c +1 -1
@@ -8786,7 +8786,7 @@ static void vmx_handle_external_intr(str vector = exit_intr_info &INTR_INFO_VECTOR_MASK ; desc = (gate_desc *)vmx->host_idt_base + vector; - entry =gate_offset (*desc); + entry =gate_offset (desc); asmvolatile ( #ifdef CONFIG_X86_64 "mov %%" _ASM_SP ", %[sp]\n\t"
arch/x86/xen/enlighten_pv.c +6 -6
@@ -584,12 +584,12 @@ static int cvt_gate_to_trap(int vector, {unsigned long addr; -if (val->type !=GATE_TRAP && val->type !=GATE_INTERRUPT ) +if (val->bits.type !=GATE_TRAP && val->bits.type !=GATE_INTERRUPT )return 0 ; info->vector = vector; - addr =gate_offset (*val); + addr =gate_offset (val);#ifdef CONFIG_X86_64 /* * Look for known traps using IST, and substitute them
@@ -622,16 +622,16 @@ static int cvt_gate_to_trap(int vector, ; else {/* Some other trap using IST? */ -if (WARN_ON (val->ist !=0 )) +if (WARN_ON (val->bits.ist !=0 ))return 0 ; }#endif /* CONFIG_X86_64 */ info->address = addr; - info->cs =gate_segment (*val); - info->flags = val->dpl; + info->cs =gate_segment (val); + info->flags = val->bits.dpl;/* interrupt gates clear IF */ -if (val->type ==GATE_INTERRUPT ) +if (val->bits.type ==GATE_INTERRUPT ) info->flags |=1 <<2 ;return 1 ;
PATCH 18/41 x86/percpu: Use static initializer for GDT entry
In reply to Thomas GleixnerThe IDT cleanup is about to remove pack_descriptor(). The GDT setup for the percpu storage can be achieved with the static initializer as well. Replace it.
--- arch/x86/kernel/setup_percpu.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
arch/x86/kernel/setup_percpu.c +3 -6
@@ -155,13 +155,10 @@ static void __init pcpup_populate_pte(unstatic inline void setup_percpu_segment (int cpu) {#ifdef CONFIG_X86_32 -struct desc_struct gdt; +struct desc_struct d =GDT_ENTRY_INIT (0x8092 ,per_cpu_offset (cpu), +0xFFFFF ); -pack_descriptor (&gdt,per_cpu_offset (cpu),0xFFFFF , -0x2 |DESCTYPE_S ,0x8 ); - gdt.s =1 ; -write_gdt_entry (get_cpu_gdt_rw (cpu), -GDT_ENTRY_PERCPU , &gdt,DESCTYPE_S ); +write_gdt_entry (get_cpu_gdt_rw (cpu),GDT_ENTRY_PERCPU , &d,DESCTYPE_S );#endif }
PATCH 19/41 x86/fpu: Use bitfield accessors for desc_struct
In reply to Thomas Gleixnerdesc_struct is a union of u32 fields and bitfields. The access to the u32 fields is done with magic macros.
Convert it to use the bitfields and replace the macro magic with parseable inline functions.
--- arch/x86/math-emu/fpu_entry.c | 11 ++++----- arch/x86/math-emu/fpu_system.h | 48 ++++++++++++++++++++++++++++++---------- arch/x86/math-emu/get_address.c | 17 +++++++------- 3 files changed, 51 insertions(+), 25 deletions(-)
arch/x86/math-emu/fpu_entry.c +5 -6
@@ -147,7 +147,7 @@ void math_emulate(struct math_emu_info * } code_descriptor =FPU_get_ldt_descriptor (FPU_CS ); -if (SEG_D_SIZE (code_descriptor)) { +if (code_descriptor.d) {/* The above test may be wrong, the book is not clear */ /* Segmented 32 bit protected mode */ addr_modes.default_mode =SEG32 ;
@@ -155,11 +155,10 @@ void math_emulate(struct math_emu_info */* 16 bit protected mode */ addr_modes.default_mode =PM16 ; } -FPU_EIP += code_base =SEG_BASE_ADDR (code_descriptor); - code_limit = code_base - + (SEG_LIMIT (code_descriptor) + -1 ) *SEG_GRANULARITY (code_descriptor) - -1 ; +FPU_EIP += code_base =seg_get_base (&code_descriptor); + code_limit =seg_get_limit (&code_descriptor) +1 ; + code_limit *=seg_get_granularity (&code_descriptor); + code_limit += code_base -1 ;if (code_limit < code_base) code_limit =0xffffffff ; }
arch/x86/math-emu/fpu_system.h +37 -11
54 lines not on this page · raw message
arch/x86/math-emu/get_address.c +9 -8
@@ -159,17 +159,18 @@ static long pm_address(u_char FPU_modrm, } descriptor =FPU_get_ldt_descriptor (addr->selector); - base_address =SEG_BASE_ADDR (descriptor); + base_address =seg_get_base (&descriptor); address = base_address + offset; - limit = base_address - + (SEG_LIMIT (descriptor) +1 ) *SEG_GRANULARITY (descriptor) -1 ; + limit =seg_get_limit (&descriptor) +1 ; + limit *=seg_get_granularity (&descriptor); + limit += base_address -1 ;if (limit < base_address) limit =0xffffffff ; -if (SEG_EXPAND_DOWN (descriptor)) { -if (SEG_G_BIT (descriptor)) +if (seg_expands_down (&descriptor)) { +if (descriptor.g) { seg_top =0xffffffff ; -else { + }else { seg_top = base_address + (1 <<20 );if (seg_top < base_address) seg_top =0xffffffff ;
@@ -182,8 +183,8 @@ static long pm_address(u_char FPU_modrm, (address > limit) || (address < base_address) ?0 : ((limit - address) >=254 ?255 : limit - address +1 ); } -if (SEG_EXECUTE_ONLY (descriptor) || - (!SEG_WRITE_PERM (descriptor) && (FPU_modrm &FPU_WRITE_BIT ))) { +if (seg_execute_only (&descriptor) || + (!seg_writable (&descriptor) && (FPU_modrm &FPU_WRITE_BIT ))) { access_limit =0 ; }return address;
PATCH 20/41 x86: Replace access to desc_struct:a/b fields
In reply to Thomas GleixnerThe union inside of desc_struct which allows access to the raw u32 parts of the descriptors. This raw access part is about to go away.
Replace the few code parts which access those fields.
--- arch/x86/include/asm/xen/hypercall.h | 6 ++++-- arch/x86/kernel/tls.c | 2 +- arch/x86/xen/enlighten_pv.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-)
arch/x86/include/asm/xen/hypercall.h +4 -2
@@ -552,6 +552,8 @@ static inline void MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr, struct desc_struct desc) { + u32 *p = (u32 *) &desc; + mcl->op = __HYPERVISOR_update_descriptor;if (sizeof (maddr) ==sizeof (long )) { mcl->args[0 ] = maddr;
@@ -559,8 +561,8 @@ MULTI_update_descriptor(struct multicall }else { mcl->args[0 ] = maddr; mcl->args[1 ] = maddr >>32 ; - mcl->args[2 ] = desc.a; - mcl->args[3 ] = desc.b; + mcl->args[2 ] = *p++; + mcl->args[3 ] = *p; }trace_xen_mc_entry (mcl,sizeof (maddr) ==sizeof (long ) ?2 :4 );
arch/x86/kernel/tls.c +1 -1
@@ -93,7 +93,7 @@ static void set_tls_desc(struct task_strwhile (n-- >0 ) {if (LDT_empty (info) ||LDT_zero (info)) { - desc->a = desc->b =0 ; +memset (desc,0 ,sizeof (*desc)); }else {fill_ldt (desc, info);
arch/x86/xen/enlighten_pv.c +1 -1
@@ -494,7 +494,7 @@ static void __init xen_load_gdt_boot(constatic inline bool desc_equal (const struct desc_struct *d1,const struct desc_struct *d2) { -return d1->a == d2->a && d1->b == d2->b; +return memcmp (d1, d2,sizeof (*d1)); } static void load_TLS_descriptor(struct thread_struct *t,
Re: [patch 20/41] x86: Replace access to desc_struct:a/b fields
Quoted 8 lines · Thomas Gleixner
The union inside of
desc_structwhich allows access to the raw u32 parts of the descriptors. This raw access part is about to go away.Replace the few code parts which access those fields.
Signed-off-by Thomas Gleixner <[email protected]>Cc Boris Ostrovsky <[email protected]>Cc Juergen Gross <[email protected]>
Juergen
Boris Ostrovsky
reviewerRe: [patch 20/41] x86: Replace access to desc_struct:a/b fields
In reply to Thomas Gleixnerarch/x86/xen/enlighten_pv.c static void __init xen_load_gdt_boot(con · line 498
Quoted 13 lines
Index:
b/arch/x86/xen/enlighten_pv.c
===================================================================arch/x86/xen/enlighten_pv.c +1
-1@@ -494,7 +494,7 @@ static void __init xen_load_gdt_boot(constatic inline bool desc_equal (const struct desc_struct *d1,const struct desc_struct *d2) { -return d1->a == d2->a && d1->b == d2->b; +return memcmp (d1, d2,sizeof (*d1)); }
Shouldn't this be !memcmp() ?
-boris
Re: [patch 20/41] x86: Replace access to desc_struct:a/b fields
Quoted 15 lines · Boris Ostrovsky
arch/x86/xen/enlighten_pv.c static void __init xen_load_gdt_boot(con · line 498
Quoted 13 lines
Index:
b/arch/x86/xen/enlighten_pv.c
===================================================================arch/x86/xen/enlighten_pv.c +1
-1@@ -494,7 +494,7 @@ static void __init xen_load_gdt_boot(constatic inline bool desc_equal (const struct desc_struct *d1,const struct desc_struct *d2) { -return d1->a == d2->a && d1->b == d2->b; +return memcmp (d1, d2,sizeof (*d1)); }Shouldn't this be !memcmp() ?
Bah yes.
Re: [patch 20/41] x86: Replace access to desc_struct:a/b fields
Quoted 18 lines · On Fri, 25 Aug 2017 16:02:02 +0200 (CEST) Thomas Gleixner <[email protected]>…
Quoted 15 lines · Boris Ostrovsky
arch/x86/xen/enlighten_pv.c static void __init xen_load_gdt_boot(con · line 498
Quoted 13 lines
Index:
b/arch/x86/xen/enlighten_pv.c
===================================================================arch/x86/xen/enlighten_pv.c +1
-1@@ -494,7 +494,7 @@ static void __init xen_load_gdt_boot(constatic inline bool desc_equal (const struct desc_struct *d1,const struct desc_struct *d2) { -return d1->a == d2->a && d1->b == d2->b; +return memcmp (d1, d2,sizeof (*d1)); }Shouldn't this be !memcmp() ?
Quoted 1 line
Bah yes.
This is why I'm one of those that like to add the "== 0" to it. Because I always get this wrong :-p
-- Steve
PATCH 21/41 x86/gdt: Use bitfields for initialization
In reply to Thomas GleixnerThe GDT entry related code uses partially bitfields and macros which initialize the two 16 bit parts of the entry by magic shift and mask operations.
Clean it up and use the bitfields to initialize and access entries.
--- arch/x86/entry/vdso/vma.c | 2 - arch/x86/include/asm/desc.h | 26 ++++++++++++++--------- arch/x86/include/asm/desc_defs.h | 44 +++++++++++++++++---------------------- arch/x86/math-emu/fpu_system.h | 2 - 4 files changed, 38 insertions(+), 36 deletions(-)
arch/x86/entry/vdso/vma.c +1 -1
@@ -351,7 +351,7 @@ static void vgetcpu_cpu_init(void *arg)* and 8 bits for the node) */ d.limit0 = cpu | ((node &0xf ) <<12 ); - d.limit = node >>4 ; + d.limit1 = node >>4 ; d.type =5 ;/* RO data, expand down, accessed */ d.dpl =3 ;/* Visible to user code */ d.s =1 ;/* Not a system segment */
arch/x86/include/asm/desc.h +16 -10
@@ -22,7 +22,7 @@ static inline void fill_ldt(struct desc_ desc->s =1 ; desc->dpl =0x3 ; desc->p = info->seg_not_present ^1 ; - desc->limit = (info->limit &0xf0000 ) >>16 ; + desc->limit1 = (info->limit &0xf0000 ) >>16 ; desc->avl = info->useable; desc->d = info->seg_32bit; desc->g = info->limit_in_pages;
@@ -169,14 +169,20 @@ static inline void pack_descriptor(struc unsigned long limit, unsigned char type, unsigned char flags) { - desc->a = ((base & 0xffff) << 16) | (limit & 0xffff); - desc->b = (base &0xff000000 ) | ((base &0xff0000 ) >>16 ) | - (limit &0x000f0000 ) | ((type &0xff ) <<8 ) | - ((flags &0xf ) <<20 ); - desc->p =1 ; + desc->limit0 = (u16) limit; + desc->base0 = (u16 ) base; + desc->base1 = (base >>16 ) &0xFF ; + desc->type = type &0x0F ; + desc->s =0 ; + desc->dpl =0 ; + desc->p =1 ; + desc->limit1 = (limit >>16 ) &0xF ; + desc->avl = (flags >>0 ) &0x01 ; + desc->l = (flags >>1 ) &0x01 ; + desc->d = (flags >>2 ) &0x01 ; + desc->g = (flags >>3 ) &0x01 ; } -static inline void set_tssldt_descriptor (void *d,unsigned long addr,unsigned type,unsigned size) {
@@ -194,7 +200,7 @@ static inline void set_tssldt_descriptor desc->base2 = (addr >>24 ) &0xFF ; desc->base3 = (u32) (addr >>32 );#else -pack_descriptor ((struct desc_struct *)d, addr, size,0x80 | type,0 ); +pack_descriptor ((struct desc_struct *)d, addr, size, type,0 );#endif }
@@ -394,13 +400,13 @@ static inline void set_desc_base(structstatic inline unsigned long get_desc_limit (const struct desc_struct *desc) { -return desc->limit0 | (desc->limit <<16 ); +return desc->limit0 | (desc->limit1 <<16 ); }static inline void set_desc_limit (struct desc_struct *desc,unsigned long limit) { desc->limit0 = limit &0xffff ; - desc->limit = (limit >>16 ) &0xf ; + desc->limit1 = (limit >>16 ) &0xf ; }#ifdef CONFIG_X86_64
arch/x86/include/asm/desc_defs.h +20 -24
54 lines not on this page · raw message
arch/x86/math-emu/fpu_system.h +1 -1
@@ -49,7 +49,7 @@ static inline unsigned long seg_get_basestatic inline unsigned long seg_get_limit (struct desc_struct *d) { -return ((unsigned long )d->limit <<16 ) | d->limit0; +return ((unsigned long )d->limit1 <<16 ) | d->limit0; }static inline unsigned long seg_get_granularity (struct desc_struct *d)
PATCH 22/41 x86/ldttss: Cleanup 32bit descriptors
In reply to Thomas GleixnerLike the IDT descriptors the LDT/TSS descriptors are pointlessly different on 32 and 64 bit.
Unify them and get rid of the duplicated code.
--- arch/x86/include/asm/desc.h | 26 +++----------------------- arch/x86/include/asm/desc_defs.h | 27 ++++++++++++--------------- 2 files changed, 15 insertions(+), 38 deletions(-)
arch/x86/include/asm/desc.h +3 -23
@@ -165,42 +165,22 @@ native_write_gdt_entry(struct desc_strucmemcpy (&gdt[entry], desc, size); } -static inline void pack_descriptor (struct desc_struct *desc,unsigned long base, -unsigned long limit,unsigned char type, -unsigned char flags) -{ - desc->limit0 = (u16 ) limit; - desc->base0 = (u16 ) base; - desc->base1 = (base >>16 ) &0xFF ; - desc->type = type &0x0F ; - desc->s =0 ; - desc->dpl =0 ; - desc->p =1 ; - desc->limit1 = (limit >>16 ) &0xF ; - desc->avl = (flags >>0 ) &0x01 ; - desc->l = (flags >>1 ) &0x01 ; - desc->d = (flags >>2 ) &0x01 ; - desc->g = (flags >>3 ) &0x01 ; -} -static inline void set_tssldt_descriptor (void *d,unsigned long addr,unsigned type,unsigned size) { -#ifdef CONFIG_X86_64 -struct ldttss_desc64 *desc = d; +struct ldttss_desc *desc = d;memset (desc,0 ,sizeof (*desc)); - desc->limit0 = size &0xFFFF ; + desc->limit0 = (u16 ) size; desc->base0 = (u16 ) addr; desc->base1 = (addr >>16 ) &0xFF ; desc->type = type; desc->p =1 ; desc->limit1 = (size >>16 ) &0xF ; desc->base2 = (addr >>24 ) &0xFF ; +#ifdef CONFIG_X86_64 desc->base3 = (u32) (addr >>32 ); -#else -pack_descriptor ((struct desc_struct *)d, addr, size, type,0 );#endif }
arch/x86/include/asm/desc_defs.h +12 -15
@@ -49,24 +49,21 @@ enum { DESCTYPE_S = 0x10, /* !system */ }; -/* LDT or TSS descriptor in the GDT. 16 bytes. */ -struct ldttss_desc64 { -u16 limit0; -u16 base0; -unsigned base1 :8 , type :5 , dpl :2 , p :1 ; -unsigned limit1 :4 , zero0 :3 , g :1 , base2 :8 ; -u32 base3; -u32 zero1; -} __attribute__((packed)); - +/* LDT or TSS descriptor in the GDT. */ +struct ldttss_desc { +u16 limit0; +u16 base0; +u16 base1 :8 , type :5 , dpl :2 , p :1 ; +u16 limit1 :4 , zero0 :3 , g :1 , base2 :8 ;#ifdef CONFIG_X86_64 -typedef struct ldttss_desc64 ldt_desc ; -typedef struct ldttss_desc64 tss_desc ; -#else -typedef struct desc_struct ldt_desc ; -typedef struct desc_struct tss_desc ; +u32 base3; +u32 zero1;#endif +} __attribute__((packed)); + +typedef struct ldttss_desc ldt_desc ; +typedef struct ldttss_desc tss_desc ;struct idt_bits { u16 ist : 3,
PATCH 23/41 x86/idt: Create file for IDT related code
In reply to Thomas GleixnerIDT related code lives in different places. Create a new source file to hold it.
Move the idt_tables and descriptors to it for a start. Follow up patches will gradually move more code over.
--- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/cpu/common.c | 9 --------- arch/x86/kernel/idt.c | 26 ++++++++++++++++++++++++++ arch/x86/kernel/traps.c | 6 ------ 4 files changed, 27 insertions(+), 16 deletions(-)
arch/x86/kernel/Makefile +1 -1
@@ -42,7 +42,7 @@ CFLAGS_irq.o := -I$(src)/../include/asm/ obj-y := process_$(BITS).o signal.o obj-$(CONFIG_COMPAT) += signal_compat.o -obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o +obj-y += traps.o idt.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o dumpstack.o nmi.o obj-$(CONFIG_MODIFY_LDT_SYSCALL) += ldt.o obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
arch/x86/kernel/cpu/common.c +0 -9
@@ -1289,15 +1289,6 @@ static __init int setup_disablecpuid(cha__setup ("clearcpuid=" , setup_disablecpuid);#ifdef CONFIG_X86_64 -struct desc_ptr idt_descr__ro_after_init = { - .size =NR_VECTORS *16 -1 , - .address = (unsigned long ) idt_table, -}; -const struct desc_ptr debug_idt_descr = { - .size =NR_VECTORS *16 -1 , - .address = (unsigned long ) debug_idt_table, -}; - DEFINE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union)__aligned(PAGE_SIZE) __visible;
arch/x86/kernel/idt.c new file +26 -0
@@ -0,0 +1,26 @@ +/* +* Interrupt descriptor table related code +* +* This file is licensed under the GPL V2 +*/ +#include <linux/interrupt.h> + +#include <asm/desc.h> + +/* Must be page-aligned because the real IDT is used in a fixmap. */ +gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss; + +#ifdef CONFIG_X86_64 +/* No need to be aligned, but done to keep all IDTs defined the same way. */ +gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; + +struct desc_ptr idt_descr__ro_after_init = { + .size =IDT_ENTRIES *16 -1 , + .address = (unsigned long ) idt_table, +}; + +const struct desc_ptr debug_idt_descr = { + .size =IDT_ENTRIES *16 -1 , + .address = (unsigned long ) debug_idt_table, +}; +#endif
arch/x86/kernel/traps.c +0 -6
@@ -65,18 +65,12 @@#include <asm/x86_init.h> #include <asm/pgalloc.h> #include <asm/proto.h> - -/* No need to be aligned, but done to keep all IDTs defined the same way. */ -gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;#else #include <asm/processor-flags.h> #include <asm/setup.h> #include <asm/proto.h> #endif -/* Must be page-aligned because the real IDT is used in a fixmap. */ -gate_desc idt_table[NR_VECTORS] __page_aligned_bss; -DECLARE_BITMAP (used_vectors,NR_VECTORS );static inline void cond_local_irq_enable (struct pt_regs *regs)
PATCH 24/41 x86/idt: Move 32bit idt_descr to C code
In reply to Thomas Gleixner32bit has the idt_descr sitting in the low level assembly entry code. There is no reason for that. Move it into the C file and use the 64bit version of it.
--- arch/x86/kernel/head_32.S | 6 ------ arch/x86/kernel/idt.c | 10 +++++----- 2 files changed, 5 insertions(+), 11 deletions(-)
arch/x86/kernel/head_32.S +0 -6
@@ -626,7 +626,6 @@ ENTRY(initial_stack) .data .globl boot_gdt_descr -.globl idt_descr ALIGN # early boot GDT descriptor (must use 1:1 address mapping)
@@ -635,11 +634,6 @@ ENTRY(initial_stack) .word __BOOT_DS+7 .long boot_gdt - __PAGE_OFFSET - .word 0 # 32-bit align idt_desc.address -idt_descr: - .word IDT_ENTRIES*8-1 # idt contains 256 entries - .long idt_table - # boot GDT descriptor (later on used by CPU#0): .word 0 # 32 bit align gdt_desc.address ENTRY(early_gdt_descr)
arch/x86/kernel/idt.c +5 -5
@@ -10,15 +10,15 @@/* Must be page-aligned because the real IDT is used in a fixmap. */ gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss; -#ifdef CONFIG_X86_64 -/* No need to be aligned, but done to keep all IDTs defined the same way. */ -gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; -struct desc_ptr idt_descr__ro_after_init = { - .size =IDT_ENTRIES *16 -1 , + .size = (IDT_ENTRIES *2 *sizeof (unsigned long )) -1 , .address = (unsigned long ) idt_table, }; +#ifdef CONFIG_X86_64 +/* No need to be aligned, but done to keep all IDTs defined the same way. */ +gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; +const struct desc_ptr debug_idt_descr = { .size =IDT_ENTRIES *16 -1 , .address = (unsigned long) debug_idt_table,
PATCH 25/41 x86/idt: Remove unused set_trap_gate()
In reply to Thomas GleixnerThis inline is not used at all.
--- arch/x86/include/asm/desc.h | 12 ------------ 1 file changed, 12 deletions(-)
arch/x86/include/asm/desc.h +0 -12
@@ -455,18 +455,6 @@ static inline void set_system_intr_gate(_set_gate (n,GATE_INTERRUPT , addr,0x3 ,0 , __KERNEL_CS); } -static inline void set_system_trap_gate (unsigned int n,void *addr) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_TRAP , addr,0x3 ,0 , __KERNEL_CS); -} - -static inline void set_trap_gate (unsigned int n,void *addr) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_TRAP , addr,0 ,0 , __KERNEL_CS); -} -static inline void set_task_gate (unsigned int n,unsigned int gdt_entry) {BUG_ON ((unsigned )n >0xFF );
PATCH 26/41 x86/idt: Consolidate IDT invalidation
In reply to Thomas Gleixnerkexec and reboot have both code to invalidate IDT. Create a common function and use it.
--- arch/x86/include/asm/desc.h | 3 +++ arch/x86/kernel/idt.c | 11 +++++++++++ arch/x86/kernel/machine_kexec_32.c | 14 +------------- arch/x86/kernel/reboot.c | 4 +--- 4 files changed, 16 insertions(+), 16 deletions(-)
arch/x86/include/asm/desc.h +3 -0
@@ -512,4 +512,7 @@ static inline void load_current_idt(void else load_idt((const struct desc_ptr *)&idt_descr); } + +extern void idt_invalidate (void *addr); +#endif /* _ASM_X86_DESC_H */
arch/x86/kernel/idt.c +11 -0
@@ -24,3 +24,14 @@ const struct desc_ptr debug_idt_descr = .address = (unsigned long) debug_idt_table, };#endif + +/** +* idt_invalidate - Invalidate interrupt descriptor table +* @addr: The virtual address of the 'invalid' IDT +*/ +void idt_invalidate (void *addr) +{ +struct desc_ptr idt = { .address = (unsigned long ) addr, .size =0 }; + +load_idt (&idt); +}
arch/x86/kernel/machine_kexec_32.c +1 -13
@@ -26,18 +26,6 @@#include <asm/set_memory.h> #include <asm/debugreg.h> -static void set_idt (void *newidt,__u16 limit) -{ -struct desc_ptr curidt; - -/* ia32 supports unaliged loads & stores */ - curidt.size = limit; - curidt.address = (unsigned long )newidt; - -load_idt (&curidt); -} - -static void set_gdt (void *newgdt,__u16 limit) {struct desc_ptr curgdt;
@@ -245,7 +233,7 @@ void machine_kexec(struct kimage *image)* If you want to load them you must set up your own idt & gdt. */ set_gdt (phys_to_virt (0 ),0 ); -set_idt (phys_to_virt (0 ),0 ); +idt_invalidate (phys_to_virt (0 ));/* now call it */ image->start = relocate_kernel_ptr((unsigned long)image->head,
arch/x86/kernel/reboot.c +1 -3
@@ -38,8 +38,6 @@void (*pm_power_off)(void );EXPORT_SYMBOL (pm_power_off); -static const struct desc_ptr no_idt = {}; -/* * This is set if we need to go through the 'emergency' path. * When machine_emergency_restart() is called, we may be on
@@ -638,7 +636,7 @@ static void native_machine_emergency_resbreak ;case BOOT_TRIPLE : -load_idt (&no_idt); +idt_invalidate (NULL ); __asm__ __volatile__("int3" );/* We're probably dead after this, but... */
PATCH 27/41 x86/idt: Move early IDT handler setup to IDT code
In reply to Thomas GleixnerThe early IDT handler setup is done in C entry code for 64 bit and in ASM entry code for 32 bit. Move the 64bit variant to the IDT code so it can be shared with 32bit in the next step.
--- arch/x86/include/asm/desc.h | 9 +++++++++ arch/x86/kernel/head64.c | 6 +----- arch/x86/kernel/idt.c | 12 ++++++++++++ 3 files changed, 22 insertions(+), 5 deletions(-)
arch/x86/include/asm/desc.h +9 -0
@@ -511,6 +511,15 @@ static inline void load_current_idt(void load_idt((const struct desc_ptr *)&idt_descr); } +extern void idt_setup_early_handler (void ); +extern void idt_setup_early_traps (void ); + +#ifdef CONFIG_X86_64 +extern void idt_setup_early_pf (void ); +#else +static inline void idt_setup_early_pf (void ) { } +#endif +extern void idt_invalidate (void *addr);#endif /* _ASM_X86_DESC_H */
arch/x86/kernel/head64.c +1 -5
@@ -311,8 +311,6 @@ static void __init copy_bootdata(char *r asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data) { -int i; -/* * Build-time sanity checks on the kernel image and module * area mappings. (these are purely build-time and produce no code)
@@ -345,9 +343,7 @@ asmlinkage __visible void __init x86_64_kasan_early_init (); -for (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++) -set_intr_gate (i, early_idt_handler_array[i]); -load_idt ((const struct desc_ptr *)&idt_descr); +idt_setup_early_handler ();copy_bootdata (__va (real_mode_data));
arch/x86/kernel/idt.c +12 -0
@@ -26,6 +26,18 @@ const struct desc_ptr debug_idt_descr =#endif /** +* idt_setup_early_handler - Initializes the idt table with early handlers +*/ +void __init idt_setup_early_handler (void ) +{ +int i; + +for (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++) +set_intr_gate (i, early_idt_handler_array[i]); +load_idt ((const struct desc_ptr *)&idt_descr); +} + +/** * idt_invalidate - Invalidate interrupt descriptor table * @addr: The virtual address of the 'invalid' IDT */
PATCH 28/41 x86/idt: Move early IDT setup out of 32bit asm
In reply to Thomas GleixnerThe early IDT setup can be done in C code like it's done on 64 bit. Reuse the 64 bit version.
--- arch/x86/include/asm/segment.h | 1 + arch/x86/kernel/head32.c | 4 ++++ arch/x86/kernel/head_32.S | 36 ++---------------------------------- arch/x86/kernel/idt.c | 4 ++++ 4 files changed, 11 insertions(+), 34 deletions(-)
arch/x86/include/asm/segment.h +1 -0
@@ -238,6 +238,7 @@#ifndef __ASSEMBLY__extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS ][EARLY_IDT_HANDLER_SIZE ]; +extern void early_ignore_irq (void );/* * Load a segment. Fall back on loading the zero segment if something goes
arch/x86/kernel/head32.c +4 -0
@@ -10,6 +10,7 @@#include <linux/mm.h> #include <linux/memblock.h> +#include <asm/desc.h> #include <asm/setup.h> #include <asm/sections.h> #include <asm/e820/api.h>
@@ -30,6 +31,9 @@ static void __init i386_default_early_se asmlinkage __visible void __init i386_start_kernel(void) {cr4_init_shadow (); + +idt_setup_early_handler (); +sanitize_boot_params (&boot_params);x86_early_init_platform_quirks ();
arch/x86/kernel/head_32.S +2 -34
@@ -345,7 +345,6 @@ ENTRY(startup_32_smp) movl %eax,%cr0 lgdt early_gdt_descr - lidt idt_descr ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers movl %eax,%ss # after changing gdt.
@@ -378,37 +377,6 @@ ENDPROC(startup_32_smp) */ __INIT setup_once: - /* - * Set up a idt with 256 interrupt gates that push zero if there - * is no error code and then jump to early_idt_handler_common. - * It doesn't actually load the idt - that needs to be done on - * each CPU. Interrupts are enabled elsewhere, when we can be - * relatively sure everything is ok. - */ - - movl $idt_table,%edi - movl $early_idt_handler_array,%eax - movl $NUM_EXCEPTION_VECTORS,%ecx -1: - movl %eax,(%edi) - movl %eax,4(%edi) - /* interrupt gate, dpl=0, present */ - movl $(0x8E000000 + __KERNEL_CS),2(%edi) - addl $EARLY_IDT_HANDLER_SIZE,%eax - addl $8,%edi - loop 1b - - movl $256 - NUM_EXCEPTION_VECTORS,%ecx - movl $ignore_int,%edx - movl $(__KERNEL_CS << 16),%eax - movw %dx,%ax /* selector = 0x0010 = cs */ - movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ -2: - movl %eax,(%edi) - movl %edx,4(%edi) - addl $8,%edi - loop 2b - #ifdef CONFIG_CC_STACKPROTECTOR /* * Configure the stack canary. The linker can't handle this by
@@ -498,7 +466,7 @@ ENDPROC(early_idt_handler_common) /* This is the default interrupt "handler" :-) */ ALIGN -ignore_int: +ENTRY(early_ignore_irq) cld #ifdef CONFIG_PRINTK pushl %eax
@@ -533,7 +501,7 @@ ENDPROC(early_idt_handler_common) hlt_loop: hlt jmp hlt_loop -ENDPROC(ignore_int) +ENDPROC(early_ignore_irq) __INITDATA .align 4 GLOBAL(early_recursion_flag)
arch/x86/kernel/idt.c +4 -0
@@ -34,6 +34,10 @@ void __init idt_setup_early_handler(voidfor (i =0 ; i <NUM_EXCEPTION_VECTORS ; i++)set_intr_gate (i, early_idt_handler_array[i]); +#ifdef CONFIG_X86_32 +for ( ; i <NR_VECTORS ; i++) +set_intr_gate (i, early_ignore_irq); +#endif load_idt ((const struct desc_ptr *)&idt_descr); }
PATCH 29/41 x86/idt: Prepare for table based init
In reply to Thomas GleixnerThe IDT setup code is handled in several places. All of them use variants of set_intr_gate() inlines. This can be done with a table based initialization, which allows to reduce the inline zoo and puts all IDT related code and information into a single place.
Add the infrastructure.
--- arch/x86/kernel/idt.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+)
arch/x86/kernel/idt.c +67 -0
@@ -5,8 +5,49 @@*/ #include <linux/interrupt.h> +#include <asm/traps.h> +#include <asm/proto.h> #include <asm/desc.h> +struct idt_data { +unsigned int vector; +unsigned int segment; +struct idt_bits bits; +const void *addr; +}; + +#define DPL0 0x0 +#define DPL3 0x3 + +#define DEFAULT_STACK 0 + +#define G (_vector, _addr, _ist, _type, _dpl, _segment) \ + { \ + .vector = _vector, \ + .bits.ist = _ist, \ + .bits.type = _type, \ + .bits.dpl = _dpl, \ + .bits.p = 1, \ + .addr = _addr, \ + .segment = _segment, \ + } + +/* Interrupt gate */ +#define INTG (_vector, _addr) \ + G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS) + +/* System interrupt gate */ +#define SYSG (_vector, _addr) \ + G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS) + +/* Interrupt gate with interrupt stack */ +#define ISTG (_vector, _addr, _ist) \ + G(_vector, _addr, _ist, GATE_INTERRUPT, DPL0, __KERNEL_CS) + +/* Task gate */ +#define TSKG (_vector, _gdt) \ + G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3) +/* Must be page-aligned because the real IDT is used in a fixmap. */ gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
@@ -25,6 +66,32 @@ const struct desc_ptr debug_idt_descr = };#endif +static inline void idt_init_desc (gate_desc *gate,const struct idt_data *d) +{ +unsigned long addr = (unsigned long ) d->addr; + + gate->offset_low = (u16 ) addr; + gate->segment = (u16 ) d->segment; + gate->bits = d->bits; + gate->offset_middle = (u16) (addr >>16 ); +#ifdef CONFIG_X86_64 + gate->offset_high = (u32) (addr >>32 ); + gate->reserved =0 ; +#endif +} + +static __init void +idt_setup_from_table (gate_desc *idt,const struct idt_data *t,int size) +{ +gate_desc desc; + +for (; size >0 ; t++, size--) { +idt_init_desc (&desc, t); +set_bit (t->vector, used_vectors); +write_idt_entry (idt, t->vector, &desc); + } +} +/** * idt_setup_early_handler - Initializes the idt table with early handlers */
PATCH 30/41 x86/idt: Switch early trap init to IDT tables
In reply to Thomas GleixnerAdd the initialization table for the early trap setup and replace the early trap init code.
--- arch/x86/kernel/idt.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup.c | 4 +-- arch/x86/kernel/traps.c | 27 ------------------------ 3 files changed, 54 insertions(+), 29 deletions(-)
arch/x86/kernel/idt.c +52 -0
@@ -48,6 +48,28 @@ struct idt_data {#define TSKG (_vector, _gdt) \ G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3) +/* +* Early traps running on the DEFAULT_STACK because the other interrupt +* stacks work only after cpu_init(). +*/ +static const __initdata struct idt_data early_idts[] = { +INTG (X86_TRAP_DB , debug), +SYSG (X86_TRAP_BP , int3), +#ifdef CONFIG_X86_32 +INTG (X86_TRAP_PF , page_fault), +#endif +}; + +#ifdef CONFIG_X86_64 +/* +* Early traps running on the DEFAULT_STACK because the other interrupt +* stacks work only after cpu_init(). +*/ +static const __initdata struct idt_data early_pf_idts[] = { +INTG (X86_TRAP_PF , page_fault), +}; +#endif +/* Must be page-aligned because the real IDT is used in a fixmap. */ gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
@@ -93,6 +115,36 @@ idt_setup_from_table(gate_desc *idt, con }/** +* idt_setup_early_traps - Initialize the idt table with early traps +* +* On X8664 these traps do not use interrupt stacks as they can't work +* before cpu_init() is invoked and sets up TSS. The IST variants are +* installed after that. +*/ +void __init idt_setup_early_traps (void ) +{ +idt_setup_from_table (idt_table, early_idts,ARRAY_SIZE (early_idts)); +} + +#ifdef CONFIG_X86_64 +/** +* idt_setup_early_pf - Initialize the idt table with early pagefault handler +* +* On X8664 this does not use interrupt stacks as they can't work before +* cpu_init() is invoked and sets up TSS. The IST variant is installed +* after that. +* +* FIXME: Why is 32bit and 64bit installing the PF handler at different +* places in the early setup code? +*/ +void __init idt_setup_early_pf (void ) +{ +idt_setup_from_table (idt_table, early_pf_idts, +ARRAY_SIZE (early_pf_idts)); +} +#endif + +/** * idt_setup_early_handler - Initializes the idt table with early handlers */ void __init idt_setup_early_handler (void )
arch/x86/kernel/setup.c +2 -2
@@ -891,7 +891,7 @@ void __init setup_arch(char **cmdline_p)*/ olpc_ofw_detect (); -early_trap_init (); +idt_setup_early_traps ();early_cpu_init ();early_ioremap_init ();
@@ -1162,7 +1162,7 @@ void __init setup_arch(char **cmdline_p)init_mem_mapping (); -early_trap_pf_init (); +idt_setup_early_pf ();/* * Update mmu_cr4_features (and, indirectly, trampoline_cr4_features)
arch/x86/kernel/traps.c +0 -27
@@ -923,33 +923,6 @@ dotraplinkage void do_iret_error(struct }#endif -/* Set of traps needed for early debugging. */ -void __init early_trap_init (void ) -{ -/* -* Don't use IST to set DEBUG_STACK as it doesn't work until TSS -* is ready in cpu_init() <-- trap_init(). Before trap_init(), -* CPU runs at ring 0 so it is impossible to hit an invalid -* stack. Using the original stack works well enough at this -* early stage. DEBUG_STACK will be equipped after cpu_init() in -* trap_init(). -*/ -set_intr_gate (X86_TRAP_DB , debug); -/* int3 can be called from all */ -set_system_intr_gate (X86_TRAP_BP , &int3); -#ifdef CONFIG_X86_32 -set_intr_gate (X86_TRAP_PF , page_fault); -#endif -load_idt (&idt_descr); -} - -void __init early_trap_pf_init (void ) -{ -#ifdef CONFIG_X86_64 -set_intr_gate (X86_TRAP_PF , page_fault); -#endif -} -void __init trap_init (void ) {int i;
Andy Lutomirski
maintainerRe: [patch 30/41] x86/idt: Switch early trap init to IDT tables
Quoted 2 lines · Thomas Gleixner
Add the initialization table for the early trap setup and replace the early trap init code.
Nice.
PATCH 31/41 x86/idt: Move debug stack init to table based
In reply to Thomas GleixnerAdd the debug_idt init table and make use of it.
--- arch/x86/include/asm/desc.h | 2 ++ arch/x86/kernel/idt.c | 23 +++++++++++++++++++++++ arch/x86/kernel/traps.c | 6 +----- 3 files changed, 26 insertions(+), 5 deletions(-)
arch/x86/include/asm/desc.h +2 -0
@@ -516,8 +516,10 @@ extern void idt_setup_early_traps(void);#ifdef CONFIG_X86_64 extern void idt_setup_early_pf (void ); +extern void idt_setup_debugidt_traps (void );#else static inline void idt_setup_early_pf (void ) { } +static inline void idt_setup_debugidt_traps (void ) { }#endif extern void idt_invalidate (void *addr);
arch/x86/kernel/idt.c +23 -0
@@ -68,6 +68,15 @@ static const __initdata struct idt_datastatic const __initdata struct idt_data early_pf_idts[] = {INTG (X86_TRAP_PF , page_fault), }; + +/* +* Override for the debug_idt. Same as the default, but with interrupt +* stack set to DEFAULT_STACK (0). Required for NMI trap handling. +*/ +static const __initdata struct idt_data dbg_idts[] = { +INTG (X86_TRAP_DB , debug), +INTG (X86_TRAP_BP , int3), +};#endif /* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -82,6 +91,10 @@ struct desc_ptr idt_descr __ro_after_ini/* No need to be aligned, but done to keep all IDTs defined the same way. */ gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; +/* +* Override for the debug_idt. Same as the default, but with interrupt +* stack set to DEFAULT_STACK (0). Required for NMI trap handling. +*/ const struct desc_ptr debug_idt_descr = { .size =IDT_ENTRIES *16 -1 , .address = (unsigned long ) debug_idt_table,
@@ -142,6 +155,16 @@ void __init idt_setup_early_pf(void)idt_setup_from_table (idt_table, early_pf_idts, ARRAY_SIZE(early_pf_idts)); } + +/** +* idt_setup_debugidt_traps - Initialize the debug idt table with debug traps +*/ +void __init idt_setup_debugidt_traps (void ) +{ +memcpy (&debug_idt_table, &idt_table,IDT_ENTRIES *16 ); + +idt_setup_from_table (debug_idt_table, dbg_idts,ARRAY_SIZE (dbg_idts)); +}#endif /**
arch/x86/kernel/traps.c +1 -5
@@ -990,9 +990,5 @@ void __init trap_init(void) x86_init.irqs.trap_init (); -#ifdef CONFIG_X86_64 -memcpy (&debug_idt_table, &idt_table,IDT_ENTRIES *16 ); -set_nmi_gate (X86_TRAP_DB , &debug); -set_nmi_gate (X86_TRAP_BP , &int3); -#endif +idt_setup_debugidt_traps (); }
PATCH 32/41 x86/idt: Move ist stack based traps to table init
In reply to Thomas GleixnerInitialize the IST based traps via a table
--- arch/x86/include/asm/desc.h | 2 ++ arch/x86/kernel/idt.c | 22 ++++++++++++++++++++++ arch/x86/kernel/traps.c | 9 +-------- 3 files changed, 25 insertions(+), 8 deletions(-)
arch/x86/include/asm/desc.h +2 -0
@@ -516,9 +516,11 @@ extern void idt_setup_early_traps(void);#ifdef CONFIG_X86_64 extern void idt_setup_early_pf (void ); +extern void idt_setup_ist_traps (void );extern void idt_setup_debugidt_traps (void );#else static inline void idt_setup_early_pf (void ) { } +static inline void idt_setup_ist_traps (void ) { }static inline void idt_setup_debugidt_traps (void ) { }#endif
arch/x86/kernel/idt.c +22 -0
@@ -92,6 +92,20 @@ struct desc_ptr idt_descr __ro_after_ini gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;/* +* The exceptions which use Interrupt stacks. They are setup after +* cpu_init() when the TSS has been initialized. +*/ +static const __initdata struct idt_data ist_idts[] = { +ISTG (X86_TRAP_DB , debug,DEBUG_STACK ), +ISTG (X86_TRAP_NMI , nmi,NMI_STACK ), +ISTG (X86_TRAP_BP , int3,DEBUG_STACK ), +ISTG (X86_TRAP_DF , double_fault,DOUBLEFAULT_STACK ), +#ifdef CONFIG_X86_MCE +ISTG (X86_TRAP_MC , &machine_check,MCE_STACK ), +#endif +}; + +/* * Override for the debug_idt. Same as the default, but with interrupt * stack set to DEFAULT_STACK (0). Required for NMI trap handling. */
@@ -157,6 +171,14 @@ void __init idt_setup_early_pf(void) }/** +* idt_setup_ist_traps - Initialize the idt table with traps using IST +*/ +void __init idt_setup_ist_traps (void ) +{ +idt_setup_from_table (idt_table, ist_idts,ARRAY_SIZE (ist_idts)); +} + +/** * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps */ void __init idt_setup_debugidt_traps (void )
arch/x86/kernel/traps.c +1 -8
@@ -979,14 +979,7 @@ void __init trap_init(void)*/ cpu_init (); -/* -* X86_TRAP_DB and X86_TRAP_BP have been set -* in early_trap_init(). However, ITS works only after -* cpu_init() loads TSS. See comments in early_trap_init(). -*/ -set_intr_gate_ist (X86_TRAP_DB , &debug,DEBUG_STACK ); -/* int3 can be called from all */ -set_system_intr_gate_ist (X86_TRAP_BP , &int3,DEBUG_STACK ); +idt_setup_ist_traps (); x86_init.irqs.trap_init ();
PATCH 33/41 x86/idt: Move regular trap init to tables
In reply to Thomas GleixnerInitialize the regular traps with a table.
--- arch/x86/include/asm/desc.h | 1 arch/x86/kernel/idt.c | 51 ++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/traps.c | 42 +----------------------------------- 3 files changed, 54 insertions(+), 40 deletions(-)
arch/x86/include/asm/desc.h +1 -0
@@ -513,6 +513,7 @@ static inline void load_current_idt(voidextern void idt_setup_early_handler (void );extern void idt_setup_early_traps (void ); +extern void idt_setup_traps (void );#ifdef CONFIG_X86_64 extern void idt_setup_early_pf (void );
arch/x86/kernel/idt.c +51 -0
63 lines not on this page · raw message
arch/x86/kernel/traps.c +2 -40
48 lines not on this page · raw message
PATCH 34/41 x86/idt: Move APIC gate initialization to tables
In reply to Thomas GleixnerReplace the APIC/SMP vector gate initialization with the table based mechanism.
--- arch/x86/include/asm/desc.h | 1 arch/x86/kernel/idt.c | 48 ++++++++++++++++++++++++++++++ arch/x86/kernel/irqinit.c | 69 -------------------------------------------- 3 files changed, 50 insertions(+), 68 deletions(-)
arch/x86/include/asm/desc.h +1 -0
@@ -514,6 +514,7 @@ static inline void load_current_idt(voidextern void idt_setup_early_handler (void );extern void idt_setup_early_traps (void );extern void idt_setup_traps (void ); +extern void idt_setup_apic_and_irq_gates (void );#ifdef CONFIG_X86_64 extern void idt_setup_early_pf (void );
arch/x86/kernel/idt.c +48 -0
60 lines not on this page · raw message
arch/x86/kernel/irqinit.c +1 -68
81 lines not on this page · raw message
PATCH 35/41 x86/idt: Move interrupt gate initialization to IDT code
In reply to Thomas GleixnerMove the gate intialization from interrupt init to the IDT code so all IDT related operations are at a single place.
--- arch/x86/kernel/idt.c | 18 ++++++++++++++++++ arch/x86/kernel/irqinit.c | 18 ------------------ 2 files changed, 18 insertions(+), 18 deletions(-)
arch/x86/kernel/idt.c +18 -0
@@ -285,7 +285,25 @@ void __init idt_setup_debugidt_traps(voi*/ void __init idt_setup_apic_and_irq_gates (void ) { +int i =FIRST_EXTERNAL_VECTOR ; +void *entry; +idt_setup_from_table (idt_table, apic_idts,ARRAY_SIZE (apic_idts)); + +for_each_clear_bit_from (i, used_vectors, first_system_vector) { + entry = irq_entries_start +8 * (i -FIRST_EXTERNAL_VECTOR ); +set_intr_gate (i, entry); + } + +for_each_clear_bit_from (i, used_vectors,NR_VECTORS ) { +#ifdef CONFIG_X86_LOCAL_APIC +set_bit (i, used_vectors); +set_intr_gate (i, spurious_interrupt); +#else + entry = irq_entries_start +8 * (i -FIRST_EXTERNAL_VECTOR ); +set_intr_gate (i, entry); +#endif + } }/**
arch/x86/kernel/irqinit.c +0 -18
@@ -89,29 +89,11 @@ void __init init_IRQ(void)void __init native_init_IRQ (void ) { -int i; -/* Execute any quirks before the call gates are initialised: */ x86_init.irqs.pre_vector_init ();idt_setup_apic_and_irq_gates (); -/* -* Cover the whole vector space, no vector can escape -* us. (some of these will be overridden and become -* 'special' SMP interrupts) -*/ - i =FIRST_EXTERNAL_VECTOR ; -for_each_clear_bit_from (i, used_vectors, first_system_vector) { -/* IA32_SYSCALL_VECTOR could be used in trap_init already. */ -set_intr_gate (i, irq_entries_start + -8 * (i -FIRST_EXTERNAL_VECTOR )); - } -#ifdef CONFIG_X86_LOCAL_APIC -for_each_clear_bit_from (i, used_vectors,NR_VECTORS ) -set_intr_gate (i, spurious_interrupt); -#endif -if (!acpi_ioapic && !of_ioapic &&nr_legacy_irqs ())setup_irq (2 , &irq2);
PATCH 36/41 x86/idt: Remove unused functions/inlines
In reply to Thomas GleixnerThe IDT related inlines are not longer used. Remove them.
--- arch/x86/include/asm/desc.h | 36 ------------------------------------ 1 file changed, 36 deletions(-)
arch/x86/include/asm/desc.h +0 -36
@@ -389,16 +389,6 @@ static inline void set_desc_limit(struct desc->limit1 = (limit >>16 ) &0xf ; } -#ifdef CONFIG_X86_64 -static inline void set_nmi_gate (int gate,void *addr) -{ -gate_desc s; - -pack_gate (&s,GATE_INTERRUPT , (unsigned long )addr,0 ,0 , __KERNEL_CS); -write_idt_entry (debug_idt_table, gate, &s); -} -#endif -static inline void _set_gate (int gate,unsigned type,const void *addr,unsigned dpl,unsigned ist,unsigned seg) {
@@ -444,32 +434,6 @@ static inline void alloc_system_vector(iset_intr_gate (n, addr); \ } while (0) -/* -* This routine sets up an interrupt gate at directory privilege level 3. -*/ -static inline void set_system_intr_gate(unsigned int n, void *addr) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_INTERRUPT , addr,0x3 ,0 , __KERNEL_CS); -} - -static inline void set_task_gate (unsigned int n,unsigned int gdt_entry) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_TASK , (void *)0 ,0 ,0 , (gdt_entry<<3 )); -} - -static inline void set_intr_gate_ist (int n,void *addr,unsigned ist) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_INTERRUPT , addr,0 , ist, __KERNEL_CS); -} - -static inline void set_system_intr_gate_ist (int n,void *addr,unsigned ist) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_INTERRUPT , addr,0x3 , ist, __KERNEL_CS); -}#ifdef CONFIG_X86_64 DECLARE_PER_CPU (u32, debug_idt_ctr);
PATCH 37/41 x86/irq: Get rid of the first_system_vector bogisity
In reply to Thomas GleixnerThis variable is beyond pointless. Nothing allocates a vector via alloc_gate() below FIRST_SYSTEM_VECTOR. So nothing can change first_system_vector.
If there is a need for a gate below FIRST_SYSTEM_VECTOR then it can be added to the vector defines and FIRST_SYSTEM_VECTOR adjusted accordingly.
--- arch/x86/include/asm/desc.h | 11 ++--------- arch/x86/kernel/apic/apic.c | 2 -- arch/x86/kernel/apic/vector.c | 2 +- arch/x86/kernel/idt.c | 2 +- arch/x86/kernel/irq.c | 2 +- 5 files changed, 5 insertions(+), 14 deletions(-)
arch/x86/include/asm/desc.h +2 -9
@@ -408,21 +408,14 @@ static inline void set_intr_gate(unsigne_set_gate (n,GATE_INTERRUPT , addr,0 ,0 , __KERNEL_CS); } -#ifdef CONFIG_X86_LOCAL_APIC -extern int first_system_vector; -#else -#define first_system_vector NR_VECTORS -#endif -/* used_vectors is BITMAP for irq is not managed by percpu vector_irq */ extern unsigned long used_vectors[]; -static inline void alloc_system_vector (int vector) +static inline void alloc_system_vector (unsigned int vector) { +BUG_ON (vector <FIRST_SYSTEM_VECTOR );if (!test_bit (vector, used_vectors)) {set_bit (vector, used_vectors); -if (first_system_vector > vector) - first_system_vector = vector; }else {BUG (); }
arch/x86/kernel/apic/apic.c +0 -2
@@ -177,8 +177,6 @@ static int disable_apic_timer __initdataint local_apic_timer_c2_ok;EXPORT_SYMBOL_GPL (local_apic_timer_c2_ok); -int first_system_vector =FIRST_SYSTEM_VECTOR ; -/* * Debug level, exported for io_apic.c */
arch/x86/kernel/apic/vector.c +1 -1
@@ -166,7 +166,7 @@ static int __assign_irq_vector(int irq, offset = current_offset; next: vector +=16 ; -if (vector >= first_system_vector) { +if (vector >=FIRST_SYSTEM_VECTOR ) { offset = (offset +1 ) %16 ; vector =FIRST_EXTERNAL_VECTOR + offset; }
arch/x86/kernel/idt.c +1 -1
@@ -290,7 +290,7 @@ void __init idt_setup_apic_and_irq_gatesidt_setup_from_table (idt_table, apic_idts,ARRAY_SIZE (apic_idts)); -for_each_clear_bit_from (i, used_vectors, first_system_vector) { +for_each_clear_bit_from (i, used_vectors,FIRST_SYSTEM_VECTOR ) { entry = irq_entries_start +8 * (i -FIRST_EXTERNAL_VECTOR );set_intr_gate (i, entry); }
arch/x86/kernel/irq.c +1 -1
@@ -414,7 +414,7 @@ int check_irq_vectors_for_cpu_disable(vo* this w/o holding vector_lock. */ for (vector =FIRST_EXTERNAL_VECTOR ; - vector < first_system_vector; vector++) { + vector <FIRST_SYSTEM_VECTOR ; vector++) {if (!test_bit (vector, used_vectors) &&IS_ERR_OR_NULL (per_cpu (vector_irq, cpu)[vector])) {if (++count == this_count)
PATCH 38/41 x86/idt: Deinline setup functions
In reply to Thomas Gleixner--- arch/x86/include/asm/desc.h | 37 ++----------------------------------- arch/x86/kernel/idt.c | 42 +++++++++++++++++++++++++++++++++--------- 2 files changed, 35 insertions(+), 44 deletions(-)
arch/x86/include/asm/desc.h +2 -35
@@ -389,45 +389,12 @@ static inline void set_desc_limit(struct desc->limit1 = (limit >>16 ) &0xf ; } -static inline void _set_gate (int gate,unsigned type,const void *addr, -unsigned dpl,unsigned ist,unsigned seg) -{ -gate_desc s; - -pack_gate (&s, type, (unsigned long )addr, dpl, ist, seg); -/* -* does not need to be atomic because it is only done once at -* setup time -*/ -write_idt_entry (idt_table, gate, &s); -} - -static inline void set_intr_gate (unsigned int n,const void *addr) -{ -BUG_ON ((unsigned )n >0xFF ); -_set_gate (n,GATE_INTERRUPT , addr,0 ,0 , __KERNEL_CS); -} +void set_intr_gate (unsigned int n,const void *addr); +void alloc_intr_gate (unsigned int n,const void *addr);/* used_vectors is BITMAP for irq is not managed by percpu vector_irq */ extern unsigned long used_vectors[]; -static inline void alloc_system_vector (unsigned int vector) -{ -BUG_ON (vector <FIRST_SYSTEM_VECTOR ); -if (!test_bit (vector, used_vectors)) { -set_bit (vector, used_vectors); - }else { -BUG (); - } -} - -#define alloc_intr_gate (n, addr) \ - do { \ - alloc_system_vector(n); \ - set_intr_gate(n, addr); \ - } while (0) - -#ifdef CONFIG_X86_64 DECLARE_PER_CPU (u32, debug_idt_ctr);static inline bool is_debug_idt_enabled (void )
arch/x86/kernel/idt.c +33 -9
93 lines not on this page · raw message
PATCH 39/41 x86/idt: Simplify alloc_intr_gate
In reply to Thomas GleixnerThe only users of alloc_intr_gate() are hypervisors, which both check the used_vectors bitmap whether they have allocated the gate already. Move that check into alloc_intr_gate() and simplify the users.
--- arch/x86/kernel/cpu/mshyperv.c | 9 ++------- arch/x86/kernel/idt.c | 6 +++--- drivers/xen/events/events_base.c | 6 ++---- 3 files changed, 7 insertions(+), 14 deletions(-)
arch/x86/kernel/cpu/mshyperv.c +2 -7
@@ -59,13 +59,8 @@ void hyperv_vector_handler(struct pt_regvoid hv_setup_vmbus_irq (void (*handler)(void )) { vmbus_handler = handler; -/* -* Setup the IDT for hypervisor callback. Prevent reallocation -* at module reload. -*/ -if (!test_bit (HYPERVISOR_CALLBACK_VECTOR , used_vectors)) -alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , - hyperv_callback_vector); +/* Setup the IDT for hypervisor callback */ +alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , hyperv_callback_vector); }void hv_remove_vmbus_irq (void )
arch/x86/kernel/idt.c +3 -3
@@ -352,7 +352,7 @@ void set_intr_gate(unsigned int n, constvoid alloc_intr_gate (unsigned int n,const void *addr) { -BUG_ON (test_bit (n, used_vectors) || n <FIRST_SYSTEM_VECTOR ); -set_bit (n, used_vectors); -set_intr_gate (n, addr); +BUG_ON (n <FIRST_SYSTEM_VECTOR ); +if (!test_and_set_bit (n, used_vectors)) +set_intr_gate (n, addr); }
drivers/xen/events/events_base.c +2 -4
@@ -1653,10 +1653,8 @@ void xen_callback_vector(void) return; }pr_info ("Xen HVM callback vector for event delivery is enabled\n" ); -/* in the restore case the vector has already been allocated */ -if (!test_bit (HYPERVISOR_CALLBACK_VECTOR , used_vectors)) -alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , - xen_hvm_callback_vector); +alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , + xen_hvm_callback_vector); } }#else
Re: [patch 39/41] x86/idt: Simplify alloc_intr_gate
Quoted 9 lines · Thomas Gleixner
The only users of
alloc_intr_gate()are hypervisors, which both check theused_vectorsbitmap whether they have allocated the gate already. Move that check intoalloc_intr_gate()and simplify the users.Signed-off-by Thomas Gleixner <[email protected]>Cc "K. Y. Srinivasan" <[email protected]>Cc Stephen Hemminger <[email protected]>Cc Boris Ostrovsky <[email protected]>Cc Juergen Gross <[email protected]>
Juergen
PATCH 40/41 x86/idt: Hide set_intr_gate()
In reply to Thomas Gleixnerset_intr_gate() is an internal function of the IDT code. The only user left is the KVM code which replaces the pagefault handler eventually.
Provide an explicit update_intr_gate() function and make set_intr_gate() static. While at it replace the magic number 14 in the KVM code with the proper trap define.
--- arch/x86/include/asm/desc.h | 2 +- arch/x86/kernel/idt.c | 33 ++++++++++++++++++++------------- arch/x86/kernel/kvm.c | 2 +- 3 files changed, 22 insertions(+), 15 deletions(-)
arch/x86/include/asm/desc.h +1 -1
@@ -389,7 +389,7 @@ static inline void set_desc_limit(struct desc->limit1 = (limit >>16 ) &0xf ; } -void set_intr_gate (unsigned int n,const void *addr); +void update_intr_gate (unsigned int n,const void *addr);void alloc_intr_gate (unsigned int n,const void *addr);/* used_vectors is BITMAP for irq is not managed by percpu vector_irq */
arch/x86/kernel/idt.c +20 -13
@@ -225,6 +225,22 @@ idt_setup_from_table(gate_desc *idt, con } } +static void set_intr_gate (unsigned int n,const void *addr) +{ +struct idt_data data; + +BUG_ON (n >0xFF ); + +memset (&data,0 ,sizeof (data)); + data.vector = n; + data.addr = addr; + data.segment = __KERNEL_CS; + data.bits.type =GATE_INTERRUPT ; + data.bits.p =1 ; + +idt_setup_from_table (idt_table, &data,1 , false); +} +/** * idt_setup_early_traps - Initialize the idt table with early traps *
@@ -334,20 +350,11 @@ void idt_invalidate(void *addr)load_idt (&idt); } -void set_intr_gate (unsigned int n,const void *addr) +void __init update_intr_gate (unsigned int n,const void *addr) { -struct idt_data data; - -BUG_ON (n >0xFF ); - -memset (&data,0 ,sizeof (data)); - data.vector = n; - data.addr = addr; - data.segment = __KERNEL_CS; - data.bits.type =GATE_INTERRUPT ; - data.bits.p =1 ; - -idt_setup_from_table (idt_table, &data,1 , false); +if (WARN_ON_ONCE (test_bit (n, used_vectors))) +return ; +set_intr_gate (n, addr); }void alloc_intr_gate (unsigned int n,const void *addr)
arch/x86/kernel/kvm.c +1 -1
@@ -455,7 +455,7 @@ static int kvm_cpu_down_prepare(unsignedstatic void __init kvm_apf_trap_init (void ) { -set_intr_gate (14 , async_page_fault); +update_intr_gate (X86_TRAP_PF , async_page_fault); }void __init kvm_guest_init (void )
Re: [patch 40/41] x86/idt: Hide set_intr_gate()
Quoted 9 lines · Thomas Gleixner
set_intr_gate()is an internal function of the IDT code. The only user left is the KVM code which replaces the pagefault handler eventually.Provide an explicit
update_intr_gate()function and makeset_intr_gate()static. While at it replace the magic number 14 in the KVM code with the proper trap define.Signed-off-by Thomas Gleixner <[email protected]>Cc Paolo Bonzini <[email protected]>
Thanks,
Paolo
PATCH 41/41 x86/irq: Remove duplicated used_vectors definition
In reply to Thomas Gleixner--- arch/x86/include/asm/irq.h | 3 --- 1 file changed, 3 deletions(-)
arch/x86/include/asm/irq.h +0 -3
@@ -42,9 +42,6 @@ extern bool handle_irq(struct irq_desc * extern __visible unsigned int do_IRQ(struct pt_regs *regs); -/* Interrupt vector management */ -extern DECLARE_BITMAP(used_vectors, NR_VECTORS); -extern void init_ISA_irqs (void );#ifdef CONFIG_X86_LOCAL_APIC