Skip to contentSkip to conversation

arm: npcm: add basic support for Nuvoton BMCs

PATCH Superseded Brendan Higgins 3 participants 9 messages Aug 31, 2017 – Sep 6, 2017

Subsystems (5)

v2 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v2 cover arm: npcm: add basic support for Nuvoton BMCs

Addressed comments from:
- Rob: http://www.spinics.net/lists/devicetree/msg192130.html
- kbuild test robot: http://www.spinics.net/lists/devicetree/msg191902.html
- kbuild test robot: http://www.spinics.net/lists/devicetree/msg191902.html

Changes since previous update:
- Added dependency for !CPU_V6 and !CPU_V6K since headsmp.S depends on v7 instructions
- Dropped errata that depend on !ARCH_MULTIPLATFORM
- Removed custom smp_init_cpus from smp_operations
- Numerous changes to device tree support

Changes have been tested on the NPCM750 evaluation board.

#1 lore raw

PATCH v2 1/3 arm: npcm: add basic support for Nuvoton BMCs

Adds basic support for the Nuvoton NPCM750 BMC.

---
 arch/arm/Kconfig             |   2 +
 arch/arm/Makefile            |   1 +
 arch/arm/mach-npcm/Kconfig   |  58 +++++++++++++++
 arch/arm/mach-npcm/Makefile  |   3 +
 arch/arm/mach-npcm/headsmp.S | 120 +++++++++++++++++++++++++++++++
 arch/arm/mach-npcm/npcm7xx.c |  34 +++++++++
 arch/arm/mach-npcm/platsmp.c | 168 +++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 386 insertions(+)
 create mode 100644 arch/arm/mach-npcm/Kconfig
 create mode 100644 arch/arm/mach-npcm/Makefile
 create mode 100644 arch/arm/mach-npcm/headsmp.S
 create mode 100644 arch/arm/mach-npcm/npcm7xx.c
 create mode 100644 arch/arm/mach-npcm/platsmp.c
arch/arm/Kconfig +2 -0
index 61a0cb15067e..05543f1cfbde 100644
@@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
 
+source "arch/arm/mach-npcm/Kconfig"
+
 source "arch/arm/mach-nspire/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
arch/arm/Makefile +1 -0
index 47d3a1ab08d2..60ca50c7d762 100644
@@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
arch/arm/mach-npcm/Kconfig new file +58 -0

58 lines not on this page · raw message

arch/arm/mach-npcm/Makefile new file +3 -0
new file mode 100644
index 000000000000..634e7c4d6b98
@@ -0,0 +1,3 @@
+obj-$(CONFIG_CPU_NPCM750_SMP)	+= platsmp.o headsmp.o
+
+obj-$(CONFIG_CPU_NPCM750)	+= npcm7xx.o
arch/arm/mach-npcm/headsmp.S new file +120 -0

120 lines not on this page · raw message

arch/arm/mach-npcm/npcm7xx.c new file +34 -0
new file mode 100644
index 000000000000..106dc62dd62b
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014 Nuvoton Technology corporation.
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH |			       \
+			 L310_AUX_CTRL_DATA_PREFETCH |			       \
+			 L310_AUX_CTRL_NS_LOCKDOWN |			       \
+			 L310_AUX_CTRL_CACHE_REPLACE_RR |		       \
+			 L2C_AUX_CTRL_SHARED_OVERRIDE |			       \
+			 L310_AUX_CTRL_FULL_LINE_ZERO)
+
+static const char *const npcm7xx_dt_match[] = {
+	"nuvoton,npcm750",
+	NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
+	.atag_offset	= 0x100,
+	.dt_compat	= npcm7xx_dt_match,
+	.l2c_aux_val	= NPCM7XX_AUX_VAL,
+	.l2c_aux_mask	= ~NPCM7XX_AUX_VAL,
+MACHINE_END
arch/arm/mach-npcm/platsmp.c new file +168 -0

168 lines not on this page · raw message

Signature · 1 line
2.14.1.581.gf28d330327-goog
maintainer Reviewed-by Tested-by Reviewed-by Avi Fishman Tested-by Avi Fishman on v2 1/3
#2 lore raw
Quoted 457 lines · Brendan Higgins

Adds basic support for the Nuvoton NPCM750 BMC.

---
 arch/arm/Kconfig             |   2 +
 arch/arm/Makefile            |   1 +
 arch/arm/mach-npcm/Kconfig   |  58 +++++++++++++++
 arch/arm/mach-npcm/Makefile  |   3 +
 arch/arm/mach-npcm/headsmp.S | 120 +++++++++++++++++++++++++++++++
 arch/arm/mach-npcm/npcm7xx.c |  34 +++++++++
 arch/arm/mach-npcm/platsmp.c | 168 +++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 386 insertions(+)
 create mode 100644 arch/arm/mach-npcm/Kconfig
 create mode 100644 arch/arm/mach-npcm/Makefile
 create mode 100644 arch/arm/mach-npcm/headsmp.S
 create mode 100644 arch/arm/mach-npcm/npcm7xx.c
 create mode 100644 arch/arm/mach-npcm/platsmp.c
arch/arm/Kconfig +2 -0
index 61a0cb15067e..05543f1cfbde 100644
@@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
 
+source "arch/arm/mach-npcm/Kconfig"
+
 source "arch/arm/mach-nspire/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
arch/arm/Makefile +1 -0
index 47d3a1ab08d2..60ca50c7d762 100644
@@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK)             += mediatek
 machine-$(CONFIG_ARCH_MXS)             += mxs
 machine-$(CONFIG_ARCH_NETX)            += netx
 machine-$(CONFIG_ARCH_NOMADIK)         += nomadik
+machine-$(CONFIG_ARCH_NPCM)            += npcm
 machine-$(CONFIG_ARCH_NSPIRE)          += nspire
 machine-$(CONFIG_ARCH_OXNAS)           += oxnas
 machine-$(CONFIG_ARCH_OMAP1)           += omap1
arch/arm/mach-npcm/Kconfig new file +58 -0
new file mode 100644
index 000000000000..a45670e516b4
@@ -0,0 +1,58 @@
+menuconfig ARCH_NPCM
+       bool "Nuvoton NPCM Architecture"
+       select ARCH_REQUIRE_GPIOLIB
+       select USE_OF
+       select PINCTRL
+       select PINCTRL_NPCM7XX
+
+if ARCH_NPCM
+
+comment "NPCMX50 CPU type"
+
+config CPU_NPCM750
+       depends on ARCH_NPCM && ARCH_MULTI_V7 && !CPU_V6 && !CPU_V6K
+       bool "Support for NPCM750 BMC CPU (Poleg)"
+       select CACHE_L2X0
+       select CPU_V7
+       select ARM_GIC
+       select ARM_ERRATA_754322
+       select ARM_ERRATA_764369
+       select USB_EHCI_ROOT_HUB_TT
+       select USB_ARCH_HAS_HCD
+       select USB_ARCH_HAS_EHCI
+       select USB_EHCI_HCD
+       select USB_ARCH_HAS_OHCI
+       select USB_OHCI_HCD
+       select USB
+       select FIQ
+       select CPU_USE_DOMAINS
+       select COMMON_CLK if OF
+       select NPCM750_TIMER
+       select MFD_SYSCON
+       help
+         Support for single core NPCM750 BMC CPU (Poleg).
+
+         Single core variant of the Nuvoton NPCM750 BMC based on the Cortex A9.
+
+config CPU_NPCM750_SMP
+       depends on CPU_NPCM750
+       bool "Support for NPCM750 BMC CPU SMP (Poleg)"
+       select HAVE_SMP
+       select HAVE_ARM_SCU
+       select ARM_ERRATA_794072
+       select PL310_ERRATA_588369
+       select PL310_ERRATA_727915
+       select ARM_ERRATA_720789
+       select DEBUG_SPINLOCK
+       select GENERIC_CLOCKEVENTS
+       select SMP
+       select HAVE_ARM_TWD if SMP
+       select HAVE_ARM_SCU if SMP
+       select CLKDEV_LOOKUP
+       select COMMON_CLK if OF
+       help
+         Support for dual core NPCM750 BMC CPU (Poleg).
+
+         Dual core variant of the Nuvoton NPCM750 BMC based on the Cortex A9.
+
+endif
arch/arm/mach-npcm/Makefile new file +3 -0
new file mode 100644
index 000000000000..634e7c4d6b98
@@ -0,0 +1,3 @@
+obj-$(CONFIG_CPU_NPCM750_SMP)  += platsmp.o headsmp.o
+
+obj-$(CONFIG_CPU_NPCM750)      += npcm7xx.o
arch/arm/mach-npcm/headsmp.S new file +120 -0
new file mode 100644
index 000000000000..d22d2fc1a35c
@@ -0,0 +1,120 @@
+/*
+ * linux/arch/arm/mach-realview/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * Copyright 2017 Google, Inc.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+.equ SVC_MODE, 0x13
+.equ I_BIT, 0x80
+.equ F_BIT, 0x40
+
+ENTRY(npcm7xx_wakeup_z1)
+       stmfd   sp!, {r0-r12, lr}
+       ldr     r0, =0x01
+       ldr     r1, =0x01
+       ldr     r2, =0x01
+
+       and     r3, r0, #0x0F /* Mask off unused bits of ID, and move to r3 */
+       and     r1, r1, #0x0F /* Mask off unused bits of target_filter */
+       and     r2, r2, #0x0F /* Mask off unused bits of filter_list */
+
+       orr     r3, r3, r1, LSL #16 /* Combine ID and target_filter */
+       orr     r3, r3, r2, LSL #24 /* and now the filter list */
+
+       /* Get the address of the GIC */
+       mrc     p15, 4, r0, c15, c0, 0 /* Read periph base address */
+       add     r0, r0, #0x1F00 /* Add offset of the sgi_trigger reg */
+
+       /* Write to the Software Generated Interrupt Register (ICDSGIR) */
+       str     r3, [r0]
+
+       ldmfd   sp!, {r0-r12, pc}
+ENDPROC(npcm7xx_wakeup_z1)
+
+ENTRY(v7_invalidate_l1_npcmX50)
+       mov     r0, #0
+       mcr     p15, 0, r0, c7, c5, 0 /* invalidate I cache */
+       mcr     p15, 2, r0, c0, c0, 0
+       mrc     p15, 1, r0, c0, c0, 0
+
+       ldr     r1, =0x7fff
+       and     r2, r1, r0, lsr #13
+
+       ldr     r1, =0x3ff
+
+       and     r3, r1, r0, lsr #3 /* NumWays - 1 */
+       add     r2, r2, #1         /* NumSets */
+
+       and     r0, r0, #0x7
+       add     r0, r0, #4 /* SetShift */
+
+       clz     r1, r3     /* WayShift */
+       add     r4, r3, #1 /* NumWays */
+1:     sub     r2, r2, #1 /* NumSets-- */
+       mov     r3, r4     /* Temp = NumWays */
+2:     subs    r3, r3, #1 /* Temp-- */
+       mov     r5, r3, lsl r1
+       mov     r6, r2, lsl r0
+       /* Reg = (Temp << WayShift) | (NumSets << SetShift) */
+       orr     r5, r5, r6
+       mcr     p15, 0, r5, c7, c6, 2
+       bgt     2b
+       cmp     r2, #0
+       bgt     1b
+       dsb
+       isb
+       mov     pc, lr
+ENDPROC(v7_invalidate_l1_npcmX50)
+
+/*
+ * MSM specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(npcm7xx_secondary_startup)
+       msr     CPSR_c, #(SVC_MODE)
+
+       bl      v7_invalidate_l1_npcmX50
+       /* disable vector table remapping */
+       mrc     p15, 0,r0, c1, c0, 0
+       and     r0, #0xffffdfff
+       mcr     p15, 0,r0, c1, c0, 0
+
+#ifdef CONFIG_CACHE_L2X0
+       /* Enable L1 & L2 prefetch + Zero line */
+       mrc     p15, 0, r0, c1, c0, 1
+       orr     r0, r0, #(7 << 1)
+       mcr     p15, 0, r0, c1, c0, 1
+#endif /* CONFIG_CACHE_L2X0 */
+
+       mrc     p15, 0, r0, c0, c0, 5
+       and     r0, r0, #15
+       adr     r4, 1f
+       ldmia   r4, {r5, r6}
+       sub     r4, r4, r5
+       add     r6, r6, r4
+       str r3,[r2]
+
+pen:   ldr     r7, [r6]
+       cmp     r7, r0
+       bne     pen
+
+       /*
+        * we've been released from the holding pen: secondary_stack
+        * should now contain the SVC stack for this core
+        */
+       b       secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
+
+       .align
+1:     .long   .
+       .long   pen_release
arch/arm/mach-npcm/npcm7xx.c new file +34 -0
new file mode 100644
index 000000000000..106dc62dd62b
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014 Nuvoton Technology corporation.
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH |                               \
+                        L310_AUX_CTRL_DATA_PREFETCH |                         \
+                        L310_AUX_CTRL_NS_LOCKDOWN |                           \
+                        L310_AUX_CTRL_CACHE_REPLACE_RR |                      \
+                        L2C_AUX_CTRL_SHARED_OVERRIDE |                        \
+                        L310_AUX_CTRL_FULL_LINE_ZERO)
+
+static const char *const npcm7xx_dt_match[] = {
+       "nuvoton,npcm750",
+       NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
+       .atag_offset    = 0x100,
+       .dt_compat      = npcm7xx_dt_match,
+       .l2c_aux_val    = NPCM7XX_AUX_VAL,
+       .l2c_aux_mask   = ~NPCM7XX_AUX_VAL,
+MACHINE_END
arch/arm/mach-npcm/platsmp.c new file +168 -1
new file mode 100644
index 000000000000..4b53adb467fc
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Copyright 2017 Google, Inc.
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "PLATSMP: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+static void __iomem *gcr_base;
+static void __iomem *scu_base;
+
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void npcm7xx_secondary_startup(void);
+extern void npcm7xx_wakeup_z1(void);
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void npcm7xx_write_pen_release(int val)
+{
+       pen_release = val;
+       /* write to pen_release must be visible to all observers. */
+       smp_wmb();
+       __cpuc_flush_dcache_area((void *) &pen_release, sizeof(pen_release));
+       outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void npcm7xx_smp_secondary_init(unsigned int cpu)
+{
+       /*
+        * let the primary processor know we're out of the
+        * pen, then head off into the C entry point
+        */
+       npcm7xx_write_pen_release(-1);
+
+       /*
+        * Synchronise with the boot thread.
+        */
+       spin_lock(&boot_lock);
+       spin_unlock(&boot_lock);
+}
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+       unsigned long timeout;
+
+       if (!gcr_base)
+               return -EIO;
+
+       /*
+        * set synchronisation state between this boot processor
+        * and the secondary one
+        */
+       spin_lock(&boot_lock);
+
+       /*
+        * The secondary processor is waiting to be released from
+        * the holding pen - release it, then wait for it to flag
+        * that it has been released by resetting pen_release.
+        */
+       npcm7xx_write_pen_release(cpu_logical_map(cpu));
+       iowrite32(virt_to_phys(npcm7xx_secondary_startup),
+                 gcr_base + NPCM7XX_SCRPAD_REG);
+       /* make npcm7xx_secondary_startup visible to all observers. */
+       smp_rmb();
+
+       arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+       timeout  = jiffies + (HZ * 1);
+       while (time_before(jiffies, timeout)) {
+               /* make sure we see any writes to pen_release. */
+               smp_rmb();
+               if (pen_release == -1)
+                       break;
+
+               udelay(10);
+       }
+
+       /*
+        * now the secondary core is starting up let it run its
+        * calibrations, then wait for it to finish
+        */
+       spin_unlock(&boot_lock);
+
+       return pen_release != -1 ? -EIO : 0;
+}
+
+
+static void __init npcm7xx_wakeup_secondary(void)
+{
+       /*
+        * write the address of secondary startup into the backup ram register
+        * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+        * backup ram register at offset 0x1FF0, which is what boot rom code
+        * is waiting for. This would wake up the secondary core from WFE
+        */
+       iowrite32(virt_to_phys(npcm7xx_secondary_startup), gcr_base +
+                 NPCM7XX_SCRPAD_REG);
+       /* make sure npcm7xx_secondary_startup is seen by all observers. */
+       smp_wmb();
+       dsb_sev();
+
+       /* make sure write buffer is drained */
+       mb();
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+       struct device_node *gcr_np, *scu_np;
+
+       gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+       if (!gcr_np) {
+               pr_err("no gcr device node\n");
+               return;
+       }
+       gcr_base = of_iomap(gcr_np, 0);
+       if (!gcr_base) {
+               pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
+               return;
+       }
+
+       scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+       if (!scu_np) {
+               pr_err("no scu device node\n");
+               return;
+       }
+       scu_base = of_iomap(scu_np, 0);
+       if (!scu_base) {
+               pr_err("could not iomap gcr at: 0x%llx\n", scu_base);
+               return;
+       }
+
+       scu_enable(scu_base);
+       npcm7xx_wakeup_secondary();
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+       .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+       .smp_boot_secondary = npcm7xx_smp_boot_secondary,
+       .smp_secondary_init = npcm7xx_smp_secondary_init,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops);
--
Quoted 2 lines

2.14.1.581.gf28d330327-goog

#3 lore raw
In reply to Brendan Higgins

Le 08/31/17 ? 15:53, Brendan Higgins a ?crit :

Quoted 52 lines

Adds basic support for the Nuvoton NPCM750 BMC.

---
 arch/arm/Kconfig             |   2 +
 arch/arm/Makefile            |   1 +
 arch/arm/mach-npcm/Kconfig   |  58 +++++++++++++++
 arch/arm/mach-npcm/Makefile  |   3 +
 arch/arm/mach-npcm/headsmp.S | 120 +++++++++++++++++++++++++++++++
 arch/arm/mach-npcm/npcm7xx.c |  34 +++++++++
 arch/arm/mach-npcm/platsmp.c | 168 +++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 386 insertions(+)
 create mode 100644 arch/arm/mach-npcm/Kconfig
 create mode 100644 arch/arm/mach-npcm/Makefile
 create mode 100644 arch/arm/mach-npcm/headsmp.S
 create mode 100644 arch/arm/mach-npcm/npcm7xx.c
 create mode 100644 arch/arm/mach-npcm/platsmp.c
arch/arm/Kconfig +2 -0
index 61a0cb15067e..05543f1cfbde 100644
@@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
 
+source "arch/arm/mach-npcm/Kconfig"
+
 source "arch/arm/mach-nspire/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
arch/arm/Makefile +1 -0
index 47d3a1ab08d2..60ca50c7d762 100644
@@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
arch/arm/mach-npcm/Kconfig new file +3 -0
new file mode 100644
index 000000000000..a45670e516b4
@@ -0,0 +1,58 @@
+menuconfig ARCH_NPCM
+	bool "Nuvoton NPCM Architecture"
+	select ARCH_REQUIRE_GPIOLIB

arch/arm/mach-npcm/Kconfig line 13

Quoted 10 lines
arch/arm/mach-npcm/Kconfig new file +10 -0
+	select USE_OF
+	select PINCTRL
+	select PINCTRL_NPCM7XX
+
+if ARCH_NPCM
+
+comment "NPCMX50 CPU type"
+
+config CPU_NPCM750
+	depends on ARCH_NPCM && ARCH_MULTI_V7 && !CPU_V6 && !CPU_V6K

Why the !CPU_V6 and !CPU_V6K, you indicate in your cover letter that this is because headsmp.S requires ARMv7 instructions, so just tell the assembler that with:

AFLAGS_headsmp.o += -march=armv7-a

Quoted 33 lines
arch/arm/mach-npcm/Kconfig new file +33 -0
+	bool "Support for NPCM750 BMC CPU (Poleg)"
+	select CACHE_L2X0
+	select CPU_V7
+	select ARM_GIC
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369
+	select USB_EHCI_ROOT_HUB_TT
+	select USB_ARCH_HAS_HCD
+	select USB_ARCH_HAS_EHCI
+	select USB_EHCI_HCD
+	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_HCD
+	select USB
+	select FIQ
+	select CPU_USE_DOMAINS
+	select COMMON_CLK if OF
+	select NPCM750_TIMER
+	select MFD_SYSCON
+	help
+	  Support for single core NPCM750 BMC CPU (Poleg).
+
+	  Single core variant of the Nuvoton NPCM750 BMC based on the Cortex A9.
+
+config CPU_NPCM750_SMP
+	depends on CPU_NPCM750
+	bool "Support for NPCM750 BMC CPU SMP (Poleg)"
+	select HAVE_SMP
+	select HAVE_ARM_SCU
+	select ARM_ERRATA_794072
+	select PL310_ERRATA_588369
+	select PL310_ERRATA_727915
+	select ARM_ERRATA_720789
+	select DEBUG_SPINLOCK

arch/arm/mach-npcm/Kconfig line 56

Quoted 10 lines
arch/arm/mach-npcm/Kconfig new file +10 -0
+	select GENERIC_CLOCKEVENTS
+	select SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	select CLKDEV_LOOKUP
+	select COMMON_CLK if OF
+	help
+	  Support for dual core NPCM750 BMC CPU (Poleg).
+
+	  Dual core variant of the Nuvoton NPCM750 BMC based on the Cortex A9.

This is something that you could determine entirely from Device Tree and just have this code unconditionally be built into the kernel and have your SMP operations do nothing if only one CPU is enabled/declared in DT. The runtime overhead of running SMP_ON_UP is largely negligible that it is worth having fewer configuration options to support.

arch/arm/mach-npcm/headsmp.S line 2

Quoted 8 lines
arch/arm/mach-npcm/headsmp.S new file +2 -0
new file mode 100644
index 000000000000..d22d2fc1a35c
@@ -0,0 +1,120 @@
+/*
+ * linux/arch/arm/mach-realview/headsmp.S

The filename no longer matches but this also indicates that this was largely based on the realview board's SMP bring-up code which Russell King repeatedly tells people to move away from since it is made for a board with a ton of limitations.

Quoted 6 lines
arch/arm/mach-npcm/headsmp.S new file +6 -0
+ *
+ * Copyright (c) 2003 ARM Limited
+ * Copyright 2017 Google, Inc.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify

arch/arm/mach-npcm/headsmp.S line 18

Quoted 10 lines
arch/arm/mach-npcm/headsmp.S new file +10 -0
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+.equ SVC_MODE, 0x13
+.equ I_BIT, 0x80
+.equ F_BIT, 0x40

You can use the C preprocessor to make this more readable and/or re-use existing defines from other header files.

Quoted 10 lines
arch/arm/mach-npcm/headsmp.S new file +10 -0
+
+ENTRY(npcm7xx_wakeup_z1)
+	stmfd	sp!, {r0-r12, lr}
+	ldr	r0, =0x01
+	ldr	r1, =0x01
+	ldr	r2, =0x01
+
+	and	r3, r0, #0x0F /* Mask off unused bits of ID, and move to r3 */
+	and	r1, r1, #0x0F /* Mask off unused bits of target_filter */
+	and	r2, r2, #0x0F /* Mask off unused bits of filter_list */

arch/arm/mach-npcm/headsmp.S line 38

Quoted 10 lines
arch/arm/mach-npcm/headsmp.S new file +10 -0
+
+	orr	r3, r3, r1, LSL #16 /* Combine ID and target_filter */
+	orr	r3, r3, r2, LSL #24 /* and now the filter list */
+
+	/* Get the address of the GIC */
+	mrc	p15, 4, r0, c15, c0, 0 /* Read periph base address */
+	add	r0, r0, #0x1F00 /* Add offset of the sgi_trigger reg */
+
+	/* Write to the Software Generated Interrupt Register (ICDSGIR) */
+	str	r3, [r0]

Don't you need some kind of barrier here?

Quoted 28 lines
arch/arm/mach-npcm/headsmp.S new file +28 -0
+
+	ldmfd	sp!, {r0-r12, pc}
+ENDPROC(npcm7xx_wakeup_z1)
+
+ENTRY(v7_invalidate_l1_npcmX50)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0 /* invalidate I cache */
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3 /* NumWays - 1 */
+	add	r2, r2, #1         /* NumSets */
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4 /* SetShift */
+
+	clz	r1, r3     /* WayShift */
+	add	r4, r3, #1 /* NumWays */
+1:	sub	r2, r2, #1 /* NumSets-- */
+	mov	r3, r4     /* Temp = NumWays */
+2:	subs	r3, r3, #1 /* Temp-- */
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0

arch/arm/mach-npcm/headsmp.S line 76

Quoted 10 lines
arch/arm/mach-npcm/headsmp.S new file +10 -0
+	/* Reg = (Temp << WayShift) | (NumSets << SetShift) */
+	orr	r5, r5, r6
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1_npcmX50)

This looks a lot, if not nearly the same thing as v7_invalidate_l1 which is already called by secondary_startup, can you see if you can re-use it directly?

arch/arm/mach-npcm/headsmp.S line 82

Quoted 6 lines
arch/arm/mach-npcm/headsmp.S new file +6 -0
+
+/*
+ * MSM specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */

Assuming this was copied from a Qualcomm MSM routine, you may want to fix the comment, typo on "initialis.

arch/arm/mach-npcm/headsmp.S line 84

Quoted 2 lines
arch/arm/mach-npcm/headsmp.S new file +2 -0
+ENTRY(npcm7xx_secondary_startup)
+	msr	CPSR_c, #(SVC_MODE)

Is there a BootROM or something that would not make the secondary cores start in supervisor mode?

Quoted 108 lines
arch/arm/mach-npcm/headsmp.S new file +36 -0
+
+	bl	v7_invalidate_l1_npcmX50
+	/* disable vector table remapping */
+	mrc	p15, 0,r0, c1, c0, 0
+	and	r0, #0xffffdfff
+	mcr	p15, 0,r0, c1, c0, 0
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Enable L1 & L2 prefetch + Zero line */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(7 << 1)
+	mcr	p15, 0, r0, c1, c0, 1
+#endif /* CONFIG_CACHE_L2X0 */
+
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+	str r3,[r2]
+
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
+
+	.align
+1:	.long	.
+	.long	pen_release
arch/arm/mach-npcm/npcm7xx.c new file +34 -0
new file mode 100644
index 000000000000..106dc62dd62b
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014 Nuvoton Technology corporation.
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH |			       \
+			 L310_AUX_CTRL_DATA_PREFETCH |			       \
+			 L310_AUX_CTRL_NS_LOCKDOWN |			       \
+			 L310_AUX_CTRL_CACHE_REPLACE_RR |		       \
+			 L2C_AUX_CTRL_SHARED_OVERRIDE |			       \
+			 L310_AUX_CTRL_FULL_LINE_ZERO)
+
+static const char *const npcm7xx_dt_match[] = {
+	"nuvoton,npcm750",
+	NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family")
+	.atag_offset	= 0x100,
+	.dt_compat	= npcm7xx_dt_match,
+	.l2c_aux_val	= NPCM7XX_AUX_VAL,
+	.l2c_aux_mask	= ~NPCM7XX_AUX_VAL,
+MACHINE_END
arch/arm/mach-npcm/platsmp.c new file +26 -0
new file mode 100644
index 000000000000..4b53adb467fc
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Copyright 2017 Google, Inc.
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "PLATSMP: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>

arch/arm/mach-npcm/platsmp.c line 36

Quoted 10 lines
arch/arm/mach-npcm/platsmp.c new file +10 -0
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+static void __iomem *gcr_base;
+static void __iomem *scu_base;
+
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void npcm7xx_secondary_startup(void);
+extern void npcm7xx_wakeup_z1(void);

This routine is not called, was it for an early revision of the silicon, or is it for CPU hotplugging maybe?

Quoted 43 lines
arch/arm/mach-npcm/platsmp.c new file +43 -0
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void npcm7xx_write_pen_release(int val)
+{
+	pen_release = val;
+	/* write to pen_release must be visible to all observers. */
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *) &pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void npcm7xx_smp_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	npcm7xx_write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	if (!gcr_base)
+		return -EIO;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */

arch/arm/mach-npcm/platsmp.c line 89

Quoted 10 lines
arch/arm/mach-npcm/platsmp.c new file +10 -0
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 */
+	npcm7xx_write_pen_release(cpu_logical_map(cpu));
+	iowrite32(virt_to_phys(npcm7xx_secondary_startup),
+		  gcr_base + NPCM7XX_SCRPAD_REG);

Please use __pa_symbol here instead of virt_to_phys() since you are calling this against a kernel image symbol.

Quoted 22 lines
arch/arm/mach-npcm/platsmp.c new file +22 -0
+	/* make npcm7xx_secondary_startup visible to all observers. */
+	smp_rmb();
+
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	timeout  = jiffies + (HZ * 1);
+	while (time_before(jiffies, timeout)) {
+		/* make sure we see any writes to pen_release. */
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -EIO : 0;
+}

arch/arm/mach-npcm/platsmp.c line 121

Quoted 10 lines
arch/arm/mach-npcm/platsmp.c new file +10 -0
+
+
+static void __init npcm7xx_wakeup_secondary(void)
+{
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01f to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This would wake up the secondary core from WFE
+	 */

The comment does not seem to match what you are doing.

arch/arm/mach-npcm/platsmp.c line 123

Quoted 2 lines
arch/arm/mach-npcm/platsmp.c new file +2 -0
+	iowrite32(virt_to_phys(npcm7xx_secondary_startup), gcr_base +
+		  NPCM7XX_SCRPAD_REG);

Same here please use __pa_symbol().

Quoted 33 lines
arch/arm/mach-npcm/platsmp.c new file +33 -0
+	/* make sure npcm7xx_secondary_startup is seen by all observers. */
+	smp_wmb();
+	dsb_sev();
+
+	/* make sure write buffer is drained */
+	mb();
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *gcr_np, *scu_np;
+
+	gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+	if (!gcr_np) {
+		pr_err("no gcr device node\n");
+		return;
+	}
+	gcr_base = of_iomap(gcr_np, 0);
+	if (!gcr_base) {
+		pr_err("could not iomap gcr at: 0x%llx\n", gcr_base);
+		return;
+	}
+
+	scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!scu_np) {
+		pr_err("no scu device node\n");
+		return;
+	}
+	scu_base = of_iomap(scu_np, 0);
+	if (!scu_base) {
+		pr_err("could not iomap gcr at: 0x%llx\n", scu_base);
+		return;
+	}

arch/arm/mach-npcm/platsmp.c line 166

Quoted 10 lines
arch/arm/mach-npcm/platsmp.c new file +10 -0
+
+	scu_enable(scu_base);
+	npcm7xx_wakeup_secondary();
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+	.smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+	.smp_boot_secondary = npcm7xx_smp_boot_secondary,
+	.smp_secondary_init = npcm7xx_smp_secondary_init,
+};

Overall you have copied the realview pen hold/release mechanism and this is really frowned upon especially if you have a better way to control the bring-up of secondary cores, e.g: via writing a special word to a specific register, or setting a special address bit (e.g: bit 31 of the physical address | secondary_startup) or anything that acts as a "GO" signal of some sort.

Signature · 1 line
Florian
#4 lore raw

With the exception of one comment, which I have responded to below, I have addressed your comments in my new version of this patch: https://patchwork.kernel.org/patch/9914153/

On Mon, Sep 4, 2017 at 7:47 PM, Florian Fainelli <[email protected]> wrote:
...

Quoted 50 lines
Quoted 25 lines
arch/arm/mach-npcm/headsmp.S new file +25 -0
+
+ENTRY(v7_invalidate_l1_npcmX50)
+     mov     r0, #0
+     mcr     p15, 0, r0, c7, c5, 0 /* invalidate I cache */
+     mcr     p15, 2, r0, c0, c0, 0
+     mrc     p15, 1, r0, c0, c0, 0
+
+     ldr     r1, =0x7fff
+     and     r2, r1, r0, lsr #13
+
+     ldr     r1, =0x3ff
+
+     and     r3, r1, r0, lsr #3 /* NumWays - 1 */
+     add     r2, r2, #1         /* NumSets */
+
+     and     r0, r0, #0x7
+     add     r0, r0, #4 /* SetShift */
+
+     clz     r1, r3     /* WayShift */
+     add     r4, r3, #1 /* NumWays */
+1:   sub     r2, r2, #1 /* NumSets-- */
+     mov     r3, r4     /* Temp = NumWays */
+2:   subs    r3, r3, #1 /* Temp-- */
+     mov     r5, r3, lsl r1
+     mov     r6, r2, lsl r0

arch/arm/mach-npcm/headsmp.S line 76

Quoted 10 lines
arch/arm/mach-npcm/headsmp.S new file +10 -0
+     /* Reg = (Temp << WayShift) | (NumSets << SetShift) */
+     orr     r5, r5, r6
+     mcr     p15, 0, r5, c7, c6, 2
+     bgt     2b
+     cmp     r2, #0
+     bgt     1b
+     dsb
+     isb
+     mov     pc, lr
+ENDPROC(v7_invalidate_l1_npcmX50)

This looks a lot, if not nearly the same thing as v7_invalidate_l1 which is already called by secondary_startup, can you see if you can re-use it directly?

arch/arm/mach-npcm/headsmp.S line 82

Quoted 6 lines
arch/arm/mach-npcm/headsmp.S new file +6 -0
+
+/*
+ * MSM specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */

Assuming this was copied from a Qualcomm MSM routine, you may want to fix the comment, typo on "initialis.

Quoted 5 lines

arch/arm/mach-npcm/headsmp.S line 84

Quoted 2 lines
arch/arm/mach-npcm/headsmp.S new file +2 -0
+ENTRY(npcm7xx_secondary_startup)
+     msr     CPSR_c, #(SVC_MODE)

Is there a BootROM or something that would not make the secondary cores start in supervisor mode?

Unfortunately, yes; however, I was able to cut all of the other code out of npcm7xx_secondary_startup, so now it just puts the core in SVC mode and relies on secondary_startup to do all of the L1 cache invalidation.

Quoted 27 lines
Quoted 27 lines
arch/arm/mach-npcm/headsmp.S new file +26 -0
+
+     bl      v7_invalidate_l1_npcmX50
+     /* disable vector table remapping */
+     mrc     p15, 0,r0, c1, c0, 0
+     and     r0, #0xffffdfff
+     mcr     p15, 0,r0, c1, c0, 0
+
+#ifdef CONFIG_CACHE_L2X0
+     /* Enable L1 & L2 prefetch + Zero line */
+     mrc     p15, 0, r0, c1, c0, 1
+     orr     r0, r0, #(7 << 1)
+     mcr     p15, 0, r0, c1, c0, 1
+#endif /* CONFIG_CACHE_L2X0 */
+
+     mrc     p15, 0, r0, c0, c0, 5
+     and     r0, r0, #15
+     adr     r4, 1f
+     ldmia   r4, {r5, r6}
+     sub     r4, r4, r5
+     add     r6, r6, r4
+     str r3,[r2]
+
+pen: ldr     r7, [r6]
+     cmp     r7, r0
+     bne     pen
+

...

#5 lore raw

PATCH v2 2/3 arm: dts: add Nuvoton NPCM750 device tree

In reply to Brendan Higgins

Add a common device tree for all Nuvoton NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg) evaluation board.

---
 .../arm/cpu-enable-method/nuvoton,npcm7xx-smp      |  42 +++++
 .../devicetree/bindings/arm/npcm/npcm.txt          |   6 +
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts          |  59 +++++++
 arch/arm/boot/dts/nuvoton-npcm750.dtsi             | 177 +++++++++++++++++++++
 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h   |  39 +++++
 5 files changed, 323 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
 create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
 create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp new file +42 -0
new file mode 100644
index 000000000000..e81f85b400cf
@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name:	"nuvoton,npcm7xx-smp"
+Compatible machines:	"nuvoton,npcm750"
+Compatible CPUs:	"arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm7xx-smp";
+
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
Documentation/devicetree/bindings/arm/npcm/npcm.txt new file +6 -0
new file mode 100644
index 000000000000..2d87d9ecea85
@@ -0,0 +1,6 @@
+NPCM Platforms Device Tree Bindings
+-----------------------------------
+NPCM750 SoC
+Required root node properties:
+	- compatible = "nuvoton,npcm750";
+
arch/arm/boot/dts/nuvoton-npcm750-evb.dts new file +59 -0

59 lines not on this page · raw message

arch/arm/boot/dts/nuvoton-npcm750.dtsi new file +177 -0

177 lines not on this page · raw message

include/dt-bindings/clock/nuvoton,npcm7xx-clks.h new file +39 -0
new file mode 100644
index 000000000000..c69d3bbf7e42
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2016 Nuvoton Technologies,  tali.perry at nuvoton.com
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#ifndef _DT_BINDINGS_CLK_NPCM7XX_H
+#define _DT_BINDINGS_CLK_NPCM7XX_H
+
+#define NPCM7XX_CLK_PLL0	0
+#define NPCM7XX_CLK_PLL1	1
+#define NPCM7XX_CLK_PLL2	2
+#define NPCM7XX_CLK_GFX		3
+#define NPCM7XX_CLK_APB1	4
+#define NPCM7XX_CLK_APB2	5
+#define NPCM7XX_CLK_APB3	6
+#define NPCM7XX_CLK_APB4	7
+#define NPCM7XX_CLK_APB5	8
+#define NPCM7XX_CLK_MC		9
+#define NPCM7XX_CLK_CPU		10
+#define NPCM7XX_CLK_SPI0	11
+#define NPCM7XX_CLK_SPI3	12
+#define NPCM7XX_CLK_SPIX	13
+#define NPCM7XX_CLK_UART_CORE	14
+#define NPCM7XX_CLK_TIMER	15
+#define NPCM7XX_CLK_HOST_UART	16
+#define NPCM7XX_CLK_MMC		17
+#define NPCM7XX_CLK_SDHC	18
+#define NPCM7XX_CLK_ADC		19
+#define NPCM7XX_CLK_GFX_MEM	20
+#define NPCM7XX_CLK_USB_BRIDGE	21
+#define NPCM7XX_CLK_AXI		22
+#define NPCM7XX_CLK_AHB		23
+#define NPCM7XX_CLK_EMC		24
+#define NPCM7XX_CLK_GMAC	25
+
+#endif
Signature · 1 line
2.14.1.581.gf28d330327-goog
maintainer Reviewed-by Tested-by Reviewed-by Avi Fishman Tested-by Avi Fishman on v2 2/3
#6 lore raw

Re: [PATCH v2 2/3] arm: dts: add Nuvoton NPCM750 device tree

Quoted 371 lines · Brendan Higgins

Add a common device tree for all Nuvoton NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg) evaluation board.

---
 .../arm/cpu-enable-method/nuvoton,npcm7xx-smp      |  42 +++++
 .../devicetree/bindings/arm/npcm/npcm.txt          |   6 +
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts          |  59 +++++++
 arch/arm/boot/dts/nuvoton-npcm750.dtsi             | 177 +++++++++++++++++++++
 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h   |  39 +++++
 5 files changed, 323 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp
 create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
 create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp new file +42 -0
new file mode 100644
index 000000000000..e81f85b400cf
@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name:    "nuvoton,npcm7xx-smp"
+Compatible machines:   "nuvoton,npcm750"
+Compatible CPUs:       "arm,cortex-a9"
+Related properties:    (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               enable-method = "nuvoton,npcm7xx-smp";
+
+               cpu at 0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       clocks = <&clk NPCM7XX_CLK_CPU>;
+                       clock-names = "clk_cpu";
+                       reg = <0>;
+                       next-level-cache = <&L2>;
+               };
+
+               cpu at 1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       clocks = <&clk NPCM7XX_CLK_CPU>;
+                       clock-names = "clk_cpu";
+                       reg = <1>;
+                       next-level-cache = <&L2>;
+               };
+       };
+
Documentation/devicetree/bindings/arm/npcm/npcm.txt new file +6 -0
new file mode 100644
index 000000000000..2d87d9ecea85
@@ -0,0 +1,6 @@
+NPCM Platforms Device Tree Bindings
+-----------------------------------
+NPCM750 SoC
+Required root node properties:
+       - compatible = "nuvoton,npcm750";
+
arch/arm/boot/dts/nuvoton-npcm750-evb.dts new file +59 -0
new file mode 100644
index 000000000000..54df32cff21b
@@ -0,0 +1,59 @@
+/*
+ * DTS file for all NPCM750 SoCs
+ *
+ * Copyright 2012 Tomer Maimon <[email protected]>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+
+/ {
+       model = "Nuvoton npcm750 Development Board (Device Tree)";
+       compatible = "nuvoton,npcm750";
+
+       chosen {
+               stdout-path = &serial3;
+               bootargs = "earlyprintk=serial,serial3,115200";
+       };
+
+       memory {
+               reg = <0 0x40000000>;
+       };
+
+       cpus {
+               enable-method = "nuvoton,npcm7xx-smp";
+       };
+
+       clk: clock-controller at f0801000 {
+               status = "okay";
+       };
+
+       apb {
+               watchdog1: watchdog at f0009000 {
+                       status = "okay";
+               };
+
+               serial0: serial0 at f0001000 {
+                       status = "okay";
+               };
+
+               serial1: serial1 at f0002000 {
+                       status = "okay";
+               };
+
+               serial2: serial2 at f0003000 {
+                       status = "okay";
+               };
+
+               serial3: serial3 at f0004000 {
+                       status = "okay";
+               };
+       };
+};
arch/arm/boot/dts/nuvoton-npcm750.dtsi new file +177 -0
new file mode 100644
index 000000000000..bca96b3ae9d3
@@ -0,0 +1,177 @@
+/*
+ * DTSi file for the NPCM750 SoC
+ *
+ * Copyright 2012 Tomer Maimon <[email protected]>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       interrupt-parent = <&gic>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu at 0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       clocks = <&clk NPCM7XX_CLK_CPU>;
+                       clock-names = "clk_cpu";
+                       reg = <0>;
+                       next-level-cache = <&l2>;
+               };
+
+               cpu at 1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       clocks = <&clk NPCM7XX_CLK_CPU>;
+                       clock-names = "clk_cpu";
+                       reg = <1>;
+                       next-level-cache = <&l2>;
+               };
+       };
+
+       gcr: gcr at f0800000 {
+               compatible = "nuvoton,npcm750-gcr", "syscon",
+                       "simple-mfd";
+               reg = <0xf0800000 0x1000>;
+       };
+
+       scu: scu at f03fe000 {
+               compatible = "arm,cortex-a9-scu";
+               reg = <0xf03fe000 0x1000>;
+       };
+
+       l2: l2-cache at f03fc000 {
+               compatible = "arm,pl310-cache";
+               reg = <0xf03fc000 0x1000>;
+               interrupts = <0 21 4>;
+               cache-unified;
+               cache-level = <2>;
+               clocks = <&clk NPCM7XX_CLK_AXI>;
+       };
+
+       gic: interrupt-controller at f03ff000 {
+               compatible = "arm,cortex-a9-gic";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               reg = <0xf03ff000 0x1000>,
+                   <0xf03fe100 0x100>;
+       };
+
+       clk: clock-controller at f0801000 {
+               compatible = "nuvoton,npcm750-clk";
+               #clock-cells = <1>;
+               reg = <0xf0801000 0x1000>;
+       };
+
+       /* external clock signal rg1refck, supplied by the phy */
+       clk-rg1refck {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <125000000>;
+       };
+
+       /* external clock signal rg2refck, supplied by the phy */
+       clk-rg2refck {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <125000000>;
+       };
+
+       clk-xin {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <50000000>;
+       };
+
+       timer at f03fe600 {
+               compatible = "arm,cortex-a9-twd-timer";
+               reg = <0xf03fe600 0x20>;
+               interrupts = <1 13 0x304>;
+               clocks = <&clk NPCM7XX_CLK_TIMER>;
+       };
+
+       apb {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "simple-bus";
+               interrupt-parent = <&gic>;
+               ranges;
+
+               timer0: timer at f0000000 {
+                       compatible = "nuvoton,npcm750-timer";
+                       interrupts = <0 32 4>;
+                       reg = <0xf0000000 0x1000>;
+                       clocks = <&clk NPCM7XX_CLK_TIMER>;
+               };
+
+               watchdog0: watchdog at f0008000 {
+                       compatible = "nuvoton,npcm750-wdt";
+                       interrupts = <0 47 4>;
+                       reg = <0xf0008000 0x1000>;
+                       status = "disabled";
+                       clocks = <&clk NPCM7XX_CLK_TIMER>;
+               };
+
+               watchdog1: watchdog at f0009000 {
+                       compatible = "nuvoton,npcm750-wdt";
+                       interrupts = <0 48 4>;
+                       reg = <0xf0009000 0x1000>;
+                       status = "disabled";
+                       clocks = <&clk NPCM7XX_CLK_TIMER>;
+               };
+
+               watchdog2: watchdog at f000a000 {
+                       compatible = "nuvoton,npcm750-wdt";
+                       interrupts = <0 49 4>;
+                       reg = <0xf000a000 0x1000>;
+                       status = "disabled";
+                       clocks = <&clk NPCM7XX_CLK_TIMER>;
+               };
+
+               serial0: serial0 at f0001000 {
+                       compatible = "nuvoton,npcm750-uart";
+                       reg = <0xf0001000 0x1000>;
+                       clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+                       interrupts = <0 2 4>;
+                       status = "disabled";
+               };
+
+               serial1: serial1 at f0002000 {
+                       compatible = "nuvoton,npcm750-uart";
+                       reg = <0xf0002000 0x1000>;
+                       clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+                       interrupts = <0 3 4>;
+                       status = "disabled";
+               };
+
+               serial2: serial2 at f0003000 {
+                       compatible = "nuvoton,npcm750-uart";
+                       reg = <0xf0003000 0x1000>;
+                       clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+                       interrupts = <0 4 4>;
+                       status = "disabled";
+               };
+
+               serial3: serial3 at f0004000 {
+                       compatible = "nuvoton,npcm750-uart";
+                       reg = <0xf0004000 0x1000>;
+                       clocks = <&clk NPCM7XX_CLK_UART_CORE>;
+                       interrupts = <0 5 4>;
+                       status = "disabled";
+               };
+       };
+};
include/dt-bindings/clock/nuvoton,npcm7xx-clks.h new file +39 -1
new file mode 100644
index 000000000000..c69d3bbf7e42
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2016 Nuvoton Technologies,  tali.perry at nuvoton.com
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#ifndef _DT_BINDINGS_CLK_NPCM7XX_H
+#define _DT_BINDINGS_CLK_NPCM7XX_H
+
+#define NPCM7XX_CLK_PLL0       0
+#define NPCM7XX_CLK_PLL1       1
+#define NPCM7XX_CLK_PLL2       2
+#define NPCM7XX_CLK_GFX                3
+#define NPCM7XX_CLK_APB1       4
+#define NPCM7XX_CLK_APB2       5
+#define NPCM7XX_CLK_APB3       6
+#define NPCM7XX_CLK_APB4       7
+#define NPCM7XX_CLK_APB5       8
+#define NPCM7XX_CLK_MC         9
+#define NPCM7XX_CLK_CPU                10
+#define NPCM7XX_CLK_SPI0       11
+#define NPCM7XX_CLK_SPI3       12
+#define NPCM7XX_CLK_SPIX       13
+#define NPCM7XX_CLK_UART_CORE  14
+#define NPCM7XX_CLK_TIMER      15
+#define NPCM7XX_CLK_HOST_UART  16
+#define NPCM7XX_CLK_MMC                17
+#define NPCM7XX_CLK_SDHC       18
+#define NPCM7XX_CLK_ADC                19
+#define NPCM7XX_CLK_GFX_MEM    20
+#define NPCM7XX_CLK_USB_BRIDGE 21
+#define NPCM7XX_CLK_AXI                22
+#define NPCM7XX_CLK_AHB                23
+#define NPCM7XX_CLK_EMC                24
+#define NPCM7XX_CLK_GMAC       25
+
+#endif
--
Quoted 2 lines

2.14.1.581.gf28d330327-goog

#7 lore raw

PATCH v2 3/3 MAINTAINERS: Add entry for the Nuvoton NPCM architecture

In reply to Brendan Higgins

Add maintainers and reviewers for the Nuvoton NPCM architecture.

---
 MAINTAINERS | 13 +++++++++++++
 1 file changed, 13 insertions(+)
MAINTAINERS +13 -0
index 44cb004c765d..67064bf11904 100644
@@ -1598,6 +1598,19 @@ F:	drivers/pinctrl/nomadik/
 F:	drivers/i2c/busses/i2c-nomadik.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
 
+ARM/NUVOTON NPCM ARCHITECTURE
+M:	Avi Fishman <[email protected]>
+M:	Tomer Maimon <[email protected]>
+R:	Brendan Higgins <[email protected]>
+R:	Rick Altherr <[email protected]>
+L:	openbmc at lists.ozlabs.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-npcm/
+F:	arch/arm/boot/dts/nuvoton-npcm*
+F:	include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F:	drivers/*/*npcm*
+F:	Documentation/*/*npcm*
+
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
 M:	Wan ZongShun <[email protected]>
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
Signature · 1 line
2.14.1.581.gf28d330327-goog
maintainer Reviewed-by Tested-by Reviewed-by Avi Fishman Tested-by Avi Fishman on v2 3/3
#8 lore raw

Re: [PATCH v2 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture

Quoted 32 lines · Brendan Higgins

Add maintainers and reviewers for the Nuvoton NPCM architecture.

---
 MAINTAINERS | 13 +++++++++++++
 1 file changed, 13 insertions(+)
MAINTAINERS +13 -1
index 44cb004c765d..67064bf11904 100644
@@ -1598,6 +1598,19 @@ F:       drivers/pinctrl/nomadik/
 F:     drivers/i2c/busses/i2c-nomadik.c
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
 
+ARM/NUVOTON NPCM ARCHITECTURE
+M:     Avi Fishman <[email protected]>
+M:     Tomer Maimon <[email protected]>
+R:     Brendan Higgins <[email protected]>
+R:     Rick Altherr <[email protected]>
+L:     openbmc at lists.ozlabs.org (moderated for non-subscribers)
+S:     Maintained
+F:     arch/arm/mach-npcm/
+F:     arch/arm/boot/dts/nuvoton-npcm*
+F:     include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F:     drivers/*/*npcm*
+F:     Documentation/*/*npcm*
+
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
 M:     Wan ZongShun <[email protected]>
 L:     linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
--
Quoted 2 lines

2.14.1.581.gf28d330327-goog