arm64: Realtek RTD1295 RTC
v4 cover arm64: Realtek RTD1295 RTC
Hello,
This series adds the RTC for the Realtek RTD1295 SoC. Based on my RTD1295 clk series.
There being no public source code for RTD1295, the implementation is based on register offsets seen in the vendor DT, as well as older mach-rtk119x code published by QNAP.
v4 adds a missing clk_put().
The DT node depends on the clk series for clock index and header.
More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-next
Have a lot of fun!
Cheers,
Andreas
v3 -> v4:
* Added clk_put() (Alexandre)
v2 -> v3:
* Dropped spinlock (Andrew)
* Improved year_days vs. days_in_year readability
v1 -> v2:
* Updated rtc driver to no longer use open/release (Alexandre)
* Cleaned up debug output (Andrew)
* Avoided COMPILE_TEST division errors (kbuild)
* Various cleanups and extensions
Andreas F?rber (3):
dt-bindings: rtc: Add Realtek RTD1295
rtc: Add Realtek RTD1295
arm64: dts: realtek: Add RTD1295 RTC node
.../devicetree/bindings/rtc/realtek,rtd119x.txt | 16 ++ arch/arm64/boot/dts/realtek/rtd1295.dtsi | 6 + drivers/rtc/Kconfig | 8 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rtd119x.c | 242 +++++++++++++++++++++ 5 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt create mode 100644 drivers/rtc/rtc-rtd119x.c
Signature · 1 line
2.13.5
PATCH v4 1/3 dt-bindings: rtc: Add Realtek RTD1295
Add a binding for the RTC on the Realtek RTD119x/RTD129x SoC families.
---
v1 -> v2 -> v3 -> v4: Unchanged
.../devicetree/bindings/rtc/realtek,rtd119x.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt
Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt new file +16 -0
@@ -0,0 +1,16 @@ +Realtek RTD129x Real-Time Clock +=============================== + +Required properties: +- compatible : Should be "realtek,rtd1295-rtc" +- reg : Specifies the physical base address and size +- clocks : Specifies the clock gate + + +Example: + + rtc at 9801b600 { + compatible = "realtek,rtd1295-clk"; + reg = <0x9801b600 0x100>; + clocks = <&clkc RTD1295_CLK_EN_MISC_RTC>; + };
Signature · 1 line
2.13.5
PATCH v4 2/3 rtc: Add Realtek RTD1295
In reply to Andreas FärberBased on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.
The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and Beelink Lake I.
---
v3 -> v4:
* Added missing clk_put() (Alexandre)
v2 -> v3:
* Dropped spinlock (Andrew)
* Refactored days-in-year helper to avoid rtc_year_days()
v1 -> v2:
* Dropped open/release in favor of probe/remove (Alexandre)
* read_time: Reordered register accesses (Alexandre)
* read_time/set_time: Refactored day calculations to avoid time64_t (Alexandre)
* read_time: Retry if seconds change (Alexandre)
* probe: Added missing RTCACR initialization code
* set_time: Fixed year check (off by 1900)
* set_time: Fixed new seconds (off by factor two)
* Cleaned up debug output (Andrew)
* Added spinlocks around register accesses
* Added masks for register fields
drivers/rtc/Kconfig | 8 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rtd119x.c | 242 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 drivers/rtc/rtc-rtd119x.c
drivers/rtc/Kconfig +8 -0
@@ -1765,6 +1765,14 @@ config RTC_DRV_CPCAP Say y here for CPCAP rtc found on some Motorola phones and tablets such as Droid 4. +config RTC_DRV_RTD119X + bool "Realtek RTD129x RTC" + depends on ARCH_REALTEK || COMPILE_TEST + default ARCH_REALTEK + help + If you say yes here, you get support for the RTD1295 SoC + Real Time Clock. + comment "HID Sensor RTC drivers" config RTC_DRV_HID_SENSOR_TIME
drivers/rtc/Makefile +1 -0
@@ -131,6 +131,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RTD119X) += rtc-rtd119x.o obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
drivers/rtc/rtc-rtd119x.c new file +242 -0
242 lines not on this page · raw message
Signature · 1 line
2.13.5
PATCH v4 3/3 arm64: dts: realtek: Add RTD1295 RTC node
In reply to Andreas FärberAdd RTC node to the Realtek RTD1295 Device Tree.
---
v3 -> v4: Unchanged
v2 -> v3:
* Rebased to no longer depend on reset controller series
v1 -> v2: Unchanged
Depends on the pending clock bindings.
arch/arm64/boot/dts/realtek/rtd1295.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/realtek/rtd1295.dtsi +6 -0
@@ -164,6 +164,12 @@ status = "disabled"; }; + rtc at 9801b600 { + compatible = "realtek,rtd1295-rtc"; + reg = <0x9801b600 0x100>; + clocks = <&clkc RTD1295_CLK_EN_MISC_RTC>; + }; + gic: interrupt-controller at ff011000 { compatible = "arm,gic-400"; reg = <0xff011000 0x1000>,
Signature · 1 line
2.13.5
Alexandre Belloni
AppliedQuoted 47 lines · Andreas F?rber
Hello,
This series adds the RTC for the Realtek RTD1295 SoC. Based on my RTD1295 clk series.
There being no public source code for RTD1295, the implementation is based on register offsets seen in the vendor DT, as well as older mach-rtk119x code published by QNAP.
v4 adds a missing
clk_put().The DT node depends on the clk series for clock index and header.
More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-nextHave a lot of fun!
Cheers,
Andreasv3 -> v4:
* Addedclk_put()(Alexandre)v2 -> v3:
* Dropped spinlock (Andrew)
* Improvedyear_daysvs.days_in_yearreadabilityv1 -> v2:
* Updated rtc driver to no longer use open/release (Alexandre)
* Cleaned up debug output (Andrew)
* AvoidedCOMPILE_TESTdivision errors (kbuild)
* Various cleanups and extensionsCc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc linux-rtc at vger.kernel.orgCc Roc He <[email protected]>Cc ??? <[email protected]>Cc devicetree at vger.kernel.orgCc Andrew Lunn <[email protected]>Andreas F?rber (3):
dt-bindings: rtc: Add Realtek RTD1295
rtc: Add Realtek RTD1295
arm64: dts: realtek: Add RTD1295 RTC node
Quoted 9 lines
.../devicetree/bindings/rtc/realtek,rtd119x.txt | 16 ++ arch/arm64/boot/dts/realtek/rtd1295.dtsi | 6 + drivers/rtc/Kconfig | 8 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rtd119x.c | 242 +++++++++++++++++++++ 5 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt create mode 100644 drivers/rtc/rtc-rtd119x.c
Applied, thanks.
Signature · 3 lines
Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Am 05.09.2017 um 09:59 schrieb Alexandre Belloni:
Quoted 57 lines · Andreas F?rber
Quoted 47 lines
Hello,
This series adds the RTC for the Realtek RTD1295 SoC. Based on my RTD1295 clk series.
There being no public source code for RTD1295, the implementation is based on register offsets seen in the vendor DT, as well as older mach-rtk119x code published by QNAP.
v4 adds a missing
clk_put().The DT node depends on the clk series for clock index and header.
More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-nextHave a lot of fun!
Cheers,
Andreasv3 -> v4:
* Addedclk_put()(Alexandre)v2 -> v3:
* Dropped spinlock (Andrew)
* Improvedyear_daysvs.days_in_yearreadabilityv1 -> v2:
* Updated rtc driver to no longer use open/release (Alexandre)
* Cleaned up debug output (Andrew)
* AvoidedCOMPILE_TESTdivision errors (kbuild)
* Various cleanups and extensionsCc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc linux-rtc at vger.kernel.orgCc Roc He <[email protected]>Cc ??? <[email protected]>Cc devicetree at vger.kernel.orgCc Andrew Lunn <[email protected]>Andreas F?rber (3):
dt-bindings: rtc: Add Realtek RTD1295
rtc: Add Realtek RTD1295
arm64: dts: realtek: Add RTD1295 RTC nodeQuoted 9 lines
.../devicetree/bindings/rtc/realtek,rtd119x.txt | 16 ++ arch/arm64/boot/dts/realtek/rtd1295.dtsi | 6 + drivers/rtc/Kconfig | 8 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rtd119x.c | 242 +++++++++++++++++++++ 5 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt create mode 100644 drivers/rtc/rtc-rtd119x.c
Quoted 1 line
Applied, thanks.
Err, I am hoping you only queued patches 1-2? Please do not queue patch 3, that needs to go through my tree as per the comments - it will not build.
Thanks,
Andreas
Signature · 3 lines
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Graham Norton HRB 21284 (AG N?rnberg)
Quoted 58 lines · Andreas F?rber
Am 05.09.2017 um 09:59 schrieb Alexandre Belloni:
Quoted 57 lines · Andreas F?rber
Quoted 56 lines
Hello,
This series adds the RTC for the Realtek RTD1295 SoC. Based on my RTD1295 clk series.
There being no public source code for RTD1295, the implementation is based on register offsets seen in the vendor DT, as well as older mach-rtk119x code published by QNAP.
v4 adds a missing
clk_put().The DT node depends on the clk series for clock index and header.
More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-nextHave a lot of fun!
Cheers,
Andreasv3 -> v4:
* Addedclk_put()(Alexandre)v2 -> v3:
* Dropped spinlock (Andrew)
* Improvedyear_daysvs.days_in_yearreadabilityv1 -> v2:
* Updated rtc driver to no longer use open/release (Alexandre)
* Cleaned up debug output (Andrew)
* AvoidedCOMPILE_TESTdivision errors (kbuild)
* Various cleanups and extensionsCc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc linux-rtc at vger.kernel.orgCc Roc He <[email protected]>Cc ??? <[email protected]>Cc devicetree at vger.kernel.orgCc Andrew Lunn <[email protected]>Andreas F?rber (3):
dt-bindings: rtc: Add Realtek RTD1295
rtc: Add Realtek RTD1295
arm64: dts: realtek: Add RTD1295 RTC node.../devicetree/bindings/rtc/realtek,rtd119x.txt | 16 ++ arch/arm64/boot/dts/realtek/rtd1295.dtsi | 6 + drivers/rtc/Kconfig | 8 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rtd119x.c | 242 +++++++++++++++++++++ 5 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt create mode 100644 drivers/rtc/rtc-rtd119x.c
Quoted 5 lines
Quoted 1 line
Applied, thanks.
Err, I am hoping you only queued patches 1-2? Please do not queue patch 3, that needs to go through my tree as per the comments - it will not build.
Yes, I'm not taking DT patches through the RTC tree.
I didn't receive v4 of the DT patch that's why I forgot to clarify.
Signature · 3 lines
Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com