tests: Add kms_atomic_interruptible test, v3.
PATCH 1/1 tests: Add kms_atomic_interruptible test, v3.
This tests the various parts of atomic that I want to make interruptible. Running with --debug shows the stats from __igt_sigiter_continue, which can be used to make sure that we don't fall over.
The default igt kms helpers use drmIoctl, which is not intercepted by igt_while_interruptible. Only igt_ioctl is. This means we have to call the ioctls manually here.
Changes since v1:
- Implement interruptible DPMS checking too.
- Use igt_ioctl + igt_while_interruptible, instead of the signal helper shotgun.
Changes since v2:
- Bump whitespace to get rid of the weird double } at same indent.
- Use more newlines in the call to the atomic ioctl.
--- lib/igt_kms.c | 3 +- lib/igt_kms.h | 1 + tests/Makefile.sources | 1 + tests/kms_atomic_interruptible.c | 323 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 327 insertions(+), 1 deletion(-) create mode 100644 tests/kms_atomic_interruptible.c
lib/igt_kms.c +2 -1
@@ -186,7 +186,8 @@ const char *igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = {const char *igt_connector_prop_names[IGT_NUM_CONNECTOR_PROPS ] = {"scaling mode" , -"CRTC_ID" +"CRTC_ID" , +"DPMS" };/*
lib/igt_kms.h +1 -0
@@ -114,6 +114,7 @@ extern const char *igt_crtc_prop_names[];enum igt_atomic_connector_properties {IGT_CONNECTOR_SCALING_MODE =0 ,IGT_CONNECTOR_CRTC_ID , +IGT_CONNECTOR_DPMS ,IGT_NUM_CONNECTOR_PROPS };
tests/Makefile.sources +1 -0
@@ -172,6 +172,7 @@ TESTS_progs = \ kms_3d \ kms_addfb_basic \ kms_atomic \ + kms_atomic_interruptible \ kms_atomic_transition \ kms_busy \ kms_ccs \
tests/kms_atomic_interruptible.c new file +323 -0
323 lines not on this page · raw message
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Maarten Lankhorst (2017-09-12 10:57:13)
Quoted 112 lines
This tests the various parts of atomic that I want to make interruptible. Running with --debug shows the stats from
__igt_sigiter_continue, which can be used to make sure that we don't fall over.The default igt kms helpers use drmIoctl, which is not intercepted by
igt_while_interruptible. Onlyigt_ioctlis. This means we have to call the ioctls manually here.Changes since v1:
- Implement interruptible DPMS checking too.
- Useigt_ioctl+igt_while_interruptible, instead of the signal helper shotgun.
Changes since v2:
- Bump whitespace to get rid of the weird double } at same indent.
- Use more newlines in the call to the atomic ioctl.Signed-off-by Maarten Lankhorst <[email protected]>Cc Daniel Stone <[email protected]>Acked-by Daniel Vetter <[email protected]>--- lib/igt_kms.c | 3 +- lib/igt_kms.h | 1 + tests/Makefile.sources | 1 + tests/kms_atomic_interruptible.c | 323 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 327 insertions(+), 1 deletion(-) create mode 100644 tests/kms_atomic_interruptible.clib/igt_kms.c +2
-1@@ -186,7 +186,8 @@ const char *igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = {const char *igt_connector_prop_names[IGT_NUM_CONNECTOR_PROPS ] = {"scaling mode" , -"CRTC_ID" +"CRTC_ID" , +"DPMS" };/* lib/igt_kms.h +1
-0@@ -114,6 +114,7 @@ extern const char *igt_crtc_prop_names[];enum igt_atomic_connector_properties {IGT_CONNECTOR_SCALING_MODE =0 ,IGT_CONNECTOR_CRTC_ID , +IGT_CONNECTOR_DPMS ,IGT_NUM_CONNECTOR_PROPS };tests/Makefile.sources +1
-0@@ -172,6 +172,7 @@ TESTS_progs = \ kms_3d \ kms_addfb_basic \ kms_atomic \ + kms_atomic_interruptible \ kms_atomic_transition \ kms_busy \ kms_ccs \tests/kms_atomic_interruptible.c new file +40
-0@@ -0,0 +1,323 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +*/ + +#include "igt.h" +#include "drmtest.h" +#include "sw_sync.h" + +enum plane_test_type +{ + test_legacy_modeset, + test_atomic_modeset, + test_legacy_dpms, + test_setplane, + test_setcursor, + test_pageflip +}; + +static int block_plane (igt_display_t *display,igt_output_t *output,enum plane_test_type test_type,igt_plane_t *plane) +{ +int timeline =sw_sync_timeline_create ();
tests/kms_atomic_interruptible.c line 50
Quoted 10 lines
tests/kms_atomic_interruptible.c new file +10
-0+ + igt_fork(child, 1) { +/* Ignore the signal helper, we need to block indefinitely on the fence. */ +signal (SIGCONT ,SIG_IGN ); + +if (test_type == test_legacy_modeset || test_type == test_atomic_modeset) { +igt_output_set_pipe (output,PIPE_NONE ); +igt_plane_set_fb (plane,NULL ); + } +igt_plane_set_fence_fd (plane,sw_sync_timeline_create_fence (timeline,1 ));
Does igt_plane_set_fence_fd() consume the fd? If it does, that's nasty, but if it doesn't we have a leak.
From my inspection, igt_plane_set_fence_fd creates a private copy of the fence fd, and doesn't bother to check if it was successful....
Quoted 184 lines
tests/kms_atomic_interruptible.c new file +184
-0+ +igt_display_commit2 (display,COMMIT_ATOMIC ); + } + +return timeline; +} + +static void unblock (int block) +{ +sw_sync_timeline_inc (block,1 ); +close (block); +} + +static void ev_page_flip (int fd,unsigned seq,unsigned tv_sec,unsigned tv_usec,void *user_data) +{ +igt_debug ("Retrieved vblank seq: %u on unk\n" , seq); +} + +static drmEventContext drm_events = { + .version =2 , + .page_flip_handler = ev_page_flip +}; + +static void run_plane_test (igt_display_t *display,enum pipe pipe,igt_output_t *output, +enum plane_test_type test_type,unsigned plane_type) +{ +drmModeModeInfo *mode; +igt_fb_t fb, fb2; +igt_plane_t *primary, *plane; +int block; + +/* +* Make sure we start with everything disabled to force a real modeset. +* igt_display_init only sets sw state, and assumes the first test doesn't care +* about hw state. +*/ +igt_display_commit2 (display,COMMIT_ATOMIC ); + +igt_output_set_pipe (output, pipe); + + primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + plane =igt_output_get_plane_type (output, plane_type); + mode =igt_output_get_mode (output); + +igt_create_fb (display->drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb); + +switch (plane_type) { +case DRM_PLANE_TYPE_PRIMARY : +igt_create_fb (display->drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb2); +break ; +case DRM_PLANE_TYPE_CURSOR : +igt_create_fb (display->drm_fd,64 ,64 , +DRM_FORMAT_ARGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb2); +break ; + } + +if (test_type != test_legacy_modeset && test_type != test_atomic_modeset) { +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (display,COMMIT_ATOMIC ); + } + +igt_plane_set_fb (plane, &fb2); + + block =block_plane (display, output, test_type, plane); +sleep (1 ); + + igt_fork(child, 1) { +signal (SIGCONT ,SIG_IGN ); +igt_assert (sleep (5 ) ==0 ); + +unblock (block); + } + +/* run the test */ +igt_while_interruptible (true) { +switch (test_type) { +case test_legacy_modeset: { +struct drm_mode_crtc crtc = { + .set_connectors_ptr = (uint64_t )(uintptr_t )&output->id, + .count_connectors =1 , + .crtc_id = primary->pipe->crtc_id, + .fb_id = fb2.fb_id, + .mode_valid =1 , + .mode = *(struct drm_mode_modeinfo *)mode, + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETCRTC , &crtc)); +break ; + } +case test_atomic_modeset: { +uint32_t objs[3 ] = { + plane->pipe->crtc_id, + output->id, + plane->drm_plane->plane_id + }; +uint32_t count_props[3 ] = {2 ,1 ,6 }; +uint32_t props[] = { +/* crtc: 2 props */ + plane->pipe->atomic_props_crtc[IGT_CRTC_MODE_ID ], + plane->pipe->atomic_props_crtc[IGT_CRTC_ACTIVE ], +/* connector: 1 prop */ + output->config.atomic_props_connector[IGT_CONNECTOR_CRTC_ID ], +/* plane: remainder props */ + plane->atomic_props_plane[IGT_PLANE_CRTC_ID ], + plane->atomic_props_plane[IGT_PLANE_FB_ID ], + plane->atomic_props_plane[IGT_PLANE_SRC_W ], + plane->atomic_props_plane[IGT_PLANE_SRC_H ], + plane->atomic_props_plane[IGT_PLANE_CRTC_W ], + plane->atomic_props_plane[IGT_PLANE_CRTC_H ] + }; +uint64_t prop_vals[] = { +/* crtc */ +0 ,/* mode_id, filled in below */ + true, +/* connector */ + plane->pipe->crtc_id, +/* plane */ + plane->pipe->crtc_id, + fb2.fb_id, +IGT_FIXED (fb2.width,0 ), +IGT_FIXED (fb2.height,0 ), + fb2.width, + fb2.height + }; +uint32_t mode_blob; + +struct drm_mode_atomic atm = { + .flags =DRM_MODE_ATOMIC_ALLOW_MODESET , + .count_objs =3 ,/* crtc, connector, plane */ + .objs_ptr = (uint64_t )(uintptr_t )&objs, + .count_props_ptr = (uint64_t )(uintptr_t )&count_props, + .props_ptr = (uint64_t )(uintptr_t )&props, + .prop_values_ptr = (uint64_t )(uintptr_t )&prop_vals, + }; + +do_or_die (drmModeCreatePropertyBlob (display->drm_fd, mode,sizeof (*mode), &mode_blob)); + prop_vals[0 ] = mode_blob; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_ATOMIC , &atm)); + +do_or_die (drmModeDestroyPropertyBlob (display->drm_fd, mode_blob)); +break ; + } +case test_legacy_dpms: { +struct drm_mode_connector_set_property prop = { + .value =DRM_MODE_DPMS_OFF , + .prop_id = output->config.atomic_props_connector[IGT_CONNECTOR_DPMS ], + .connector_id = output->id, + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETPROPERTY , &prop)); +break ; + } +case test_setcursor: { +struct drm_mode_cursor cur = { + .flags =DRM_MODE_CURSOR_BO , + .crtc_id = plane->pipe->crtc_id, + .width = fb2.width, + .height = fb2.height, + .handle = fb2.gem_handle, + }; +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_CURSOR , &cur)); +break ; + } +case test_setplane: { +struct drm_mode_set_plane setplane = { + .plane_id = plane->drm_plane->plane_id, + .crtc_id = plane->pipe->crtc_id, + .fb_id = fb2.fb_id, + .crtc_w = fb2.width, + .crtc_h = fb2.height, + .src_w =IGT_FIXED (fb2.width,0 ), + .src_h =IGT_FIXED (fb2.height,0 ), + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETPLANE , &setplane)); +break ; + } +case test_pageflip: { +struct drm_mode_crtc_page_flip pageflip = { + .crtc_id = plane->pipe->crtc_id, + .fb_id = fb2.fb_id,
tests/kms_atomic_interruptible.c line 244
Quoted 10 lines
tests/kms_atomic_interruptible.c new file +10
-0+ .flags = DRM_MODE_PAGE_FLIP_EVENT, + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_PAGE_FLIP , &pageflip)); + +drmHandleEvent (display->drm_fd, &drm_events); +break ; + } + } + }
Looks ok. You might want to refactor out the do_or_die() if you ever hit them in practice, but in the mean time they make it clear what you want to check.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Op 12-09-17 om 12:09 schreef Chris Wilson:
Quoted 126 lines
Quoting Maarten Lankhorst (2017-09-12 10:57:13)
Quoted 112 lines
This tests the various parts of atomic that I want to make interruptible. Running with --debug shows the stats from
__igt_sigiter_continue, which can be used to make sure that we don't fall over.The default igt kms helpers use drmIoctl, which is not intercepted by
igt_while_interruptible. Onlyigt_ioctlis. This means we have to call the ioctls manually here.Changes since v1:
- Implement interruptible DPMS checking too.
- Useigt_ioctl+igt_while_interruptible, instead of the signal helper shotgun.
Changes since v2:
- Bump whitespace to get rid of the weird double } at same indent.
- Use more newlines in the call to the atomic ioctl.Signed-off-by Maarten Lankhorst <[email protected]>Cc Daniel Stone <[email protected]>Acked-by Daniel Vetter <[email protected]>--- lib/igt_kms.c | 3 +- lib/igt_kms.h | 1 + tests/Makefile.sources | 1 + tests/kms_atomic_interruptible.c | 323 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 327 insertions(+), 1 deletion(-) create mode 100644 tests/kms_atomic_interruptible.clib/igt_kms.c +2
-1@@ -186,7 +186,8 @@ const char *igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = {const char *igt_connector_prop_names[IGT_NUM_CONNECTOR_PROPS ] = {"scaling mode" , -"CRTC_ID" +"CRTC_ID" , +"DPMS" };/* lib/igt_kms.h +1
-0@@ -114,6 +114,7 @@ extern const char *igt_crtc_prop_names[];enum igt_atomic_connector_properties {IGT_CONNECTOR_SCALING_MODE =0 ,IGT_CONNECTOR_CRTC_ID , +IGT_CONNECTOR_DPMS ,IGT_NUM_CONNECTOR_PROPS };tests/Makefile.sources +1
-0@@ -172,6 +172,7 @@ TESTS_progs = \ kms_3d \ kms_addfb_basic \ kms_atomic \ + kms_atomic_interruptible \ kms_atomic_transition \ kms_busy \ kms_ccs \tests/kms_atomic_interruptible.c new file +40
-0@@ -0,0 +1,323 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +*/ + +#include "igt.h" +#include "drmtest.h" +#include "sw_sync.h" + +enum plane_test_type +{ + test_legacy_modeset, + test_atomic_modeset, + test_legacy_dpms, + test_setplane, + test_setcursor, + test_pageflip +}; + +static int block_plane (igt_display_t *display,igt_output_t *output,enum plane_test_type test_type,igt_plane_t *plane) +{ +int timeline =sw_sync_timeline_create ();tests/kms_atomic_interruptible.c line 50
Quoted 10 lines
tests/kms_atomic_interruptible.c new file +10
-0+ + igt_fork(child, 1) { +/* Ignore the signal helper, we need to block indefinitely on the fence. */ +signal (SIGCONT ,SIG_IGN ); + +if (test_type == test_legacy_modeset || test_type == test_atomic_modeset) { +igt_output_set_pipe (output,PIPE_NONE ); +igt_plane_set_fb (plane,NULL ); + } +igt_plane_set_fence_fd (plane,sw_sync_timeline_create_fence (timeline,1 ));Does
igt_plane_set_fence_fd()consume the fd? If it does, that's nasty, but if it doesn't we have a leak.
Quoted 2 lines
From my inspection,
igt_plane_set_fence_fdcreates a private copy of the fence fd, and doesn't bother to check if it was successful....
Seems that igt_plane_set_fence_fd should check if dup worked, but it only leaks in our throwaway fork, so it's not a leak that will matter in any way. :)
Quoted 189 lines
Quoted 189 lines
tests/kms_atomic_interruptible.c new file +189
-0+ +igt_display_commit2 (display,COMMIT_ATOMIC ); + } + +return timeline; +} + +static void unblock (int block) +{ +sw_sync_timeline_inc (block,1 ); +close (block); +} + +static void ev_page_flip (int fd,unsigned seq,unsigned tv_sec,unsigned tv_usec,void *user_data) +{ +igt_debug ("Retrieved vblank seq: %u on unk\n" , seq); +} + +static drmEventContext drm_events = { + .version =2 , + .page_flip_handler = ev_page_flip +}; + +static void run_plane_test (igt_display_t *display,enum pipe pipe,igt_output_t *output, +enum plane_test_type test_type,unsigned plane_type) +{ +drmModeModeInfo *mode; +igt_fb_t fb, fb2; +igt_plane_t *primary, *plane; +int block; + +/* +* Make sure we start with everything disabled to force a real modeset. +* igt_display_init only sets sw state, and assumes the first test doesn't care +* about hw state. +*/ +igt_display_commit2 (display,COMMIT_ATOMIC ); + +igt_output_set_pipe (output, pipe); + + primary =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + plane =igt_output_get_plane_type (output, plane_type); + mode =igt_output_get_mode (output); + +igt_create_fb (display->drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb); + +switch (plane_type) { +case DRM_PLANE_TYPE_PRIMARY : +igt_create_fb (display->drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb2); +break ; +case DRM_PLANE_TYPE_CURSOR : +igt_create_fb (display->drm_fd,64 ,64 , +DRM_FORMAT_ARGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , &fb2); +break ; + } + +if (test_type != test_legacy_modeset && test_type != test_atomic_modeset) { +igt_plane_set_fb (primary, &fb); +igt_display_commit2 (display,COMMIT_ATOMIC ); + } + +igt_plane_set_fb (plane, &fb2); + + block =block_plane (display, output, test_type, plane); +sleep (1 ); + + igt_fork(child, 1) { +signal (SIGCONT ,SIG_IGN ); +igt_assert (sleep (5 ) ==0 ); + +unblock (block); + } + +/* run the test */ +igt_while_interruptible (true) { +switch (test_type) { +case test_legacy_modeset: { +struct drm_mode_crtc crtc = { + .set_connectors_ptr = (uint64_t )(uintptr_t )&output->id, + .count_connectors =1 , + .crtc_id = primary->pipe->crtc_id, + .fb_id = fb2.fb_id, + .mode_valid =1 , + .mode = *(struct drm_mode_modeinfo *)mode, + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETCRTC , &crtc)); +break ; + } +case test_atomic_modeset: { +uint32_t objs[3 ] = { + plane->pipe->crtc_id, + output->id, + plane->drm_plane->plane_id + }; +uint32_t count_props[3 ] = {2 ,1 ,6 }; +uint32_t props[] = { +/* crtc: 2 props */ + plane->pipe->atomic_props_crtc[IGT_CRTC_MODE_ID ], + plane->pipe->atomic_props_crtc[IGT_CRTC_ACTIVE ], +/* connector: 1 prop */ + output->config.atomic_props_connector[IGT_CONNECTOR_CRTC_ID ], +/* plane: remainder props */ + plane->atomic_props_plane[IGT_PLANE_CRTC_ID ], + plane->atomic_props_plane[IGT_PLANE_FB_ID ], + plane->atomic_props_plane[IGT_PLANE_SRC_W ], + plane->atomic_props_plane[IGT_PLANE_SRC_H ], + plane->atomic_props_plane[IGT_PLANE_CRTC_W ], + plane->atomic_props_plane[IGT_PLANE_CRTC_H ] + }; +uint64_t prop_vals[] = { +/* crtc */ +0 ,/* mode_id, filled in below */ + true, +/* connector */ + plane->pipe->crtc_id, +/* plane */ + plane->pipe->crtc_id, + fb2.fb_id, +IGT_FIXED (fb2.width,0 ), +IGT_FIXED (fb2.height,0 ), + fb2.width, + fb2.height + }; +uint32_t mode_blob; + +struct drm_mode_atomic atm = { + .flags =DRM_MODE_ATOMIC_ALLOW_MODESET , + .count_objs =3 ,/* crtc, connector, plane */ + .objs_ptr = (uint64_t )(uintptr_t )&objs, + .count_props_ptr = (uint64_t )(uintptr_t )&count_props, + .props_ptr = (uint64_t )(uintptr_t )&props, + .prop_values_ptr = (uint64_t )(uintptr_t )&prop_vals, + }; + +do_or_die (drmModeCreatePropertyBlob (display->drm_fd, mode,sizeof (*mode), &mode_blob)); + prop_vals[0 ] = mode_blob; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_ATOMIC , &atm)); + +do_or_die (drmModeDestroyPropertyBlob (display->drm_fd, mode_blob)); +break ; + } +case test_legacy_dpms: { +struct drm_mode_connector_set_property prop = { + .value =DRM_MODE_DPMS_OFF , + .prop_id = output->config.atomic_props_connector[IGT_CONNECTOR_DPMS ], + .connector_id = output->id, + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETPROPERTY , &prop)); +break ; + } +case test_setcursor: { +struct drm_mode_cursor cur = { + .flags =DRM_MODE_CURSOR_BO , + .crtc_id = plane->pipe->crtc_id, + .width = fb2.width, + .height = fb2.height, + .handle = fb2.gem_handle, + }; +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_CURSOR , &cur)); +break ; + } +case test_setplane: { +struct drm_mode_set_plane setplane = { + .plane_id = plane->drm_plane->plane_id, + .crtc_id = plane->pipe->crtc_id, + .fb_id = fb2.fb_id, + .crtc_w = fb2.width, + .crtc_h = fb2.height, + .src_w =IGT_FIXED (fb2.width,0 ), + .src_h =IGT_FIXED (fb2.height,0 ), + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_SETPLANE , &setplane)); +break ; + } +case test_pageflip: { +struct drm_mode_crtc_page_flip pageflip = { + .crtc_id = plane->pipe->crtc_id, + .fb_id = fb2.fb_id, + .flags =DRM_MODE_PAGE_FLIP_EVENT , + }; + +do_or_die (igt_ioctl (display->drm_fd,DRM_IOCTL_MODE_PAGE_FLIP , &pageflip)); +
Quoted 8 lines
tests/kms_atomic_interruptible.c line 244
Quoted 5 lines
tests/kms_atomic_interruptible.c new file +5
-0+drmHandleEvent (display->drm_fd, &drm_events); +break ; + } + } + }Looks ok. You might want to refactor out the
do_or_die()if you ever hit them in practice, but in the mean time they make it clear what you want to check.
I don't think the do_or_die are harmful here, but perhaps replace with do_ioctl?
~Maarten
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for tests: Add kms_atomic_interruptible test, v3.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: tests: Add kms_atomic_interruptible test, v3.
URL : https://patchwork.freedesktop.org/series/30187/
State : success
== Summary ==
IGT patchset tested on top of latest successful build f9e0154630766b63617c64255a68e5129e233a4b igt/gem_evict_(alignment,everything): Limit to low 4G
with latest DRM-Tip kernel build CI_DRM_3077694f07d3df18 drm-tip: 2017y-09m-12d-09h-59m-00s UTC integration manifest
Test chamelium:
Subgroup dp-crc-fast:
fail -> PASS (fi-kbl-7500u) fdo#102514
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> FAIL (fi-snb-2600) fdo#100215fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#100215 https://bugs.freedesktop.org/show_bug.cgi?id=100215
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:446s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:454s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:382s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:538s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:270s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:514s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:512s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:501s fi-cfl-s total:289 pass:250 dwarn:4 dfail:0 fail:0 skip:35 time:449s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:447s fi-glk-2a total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:600s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:432s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:417s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:442s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:489s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:462s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:491s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:579s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:586s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:556s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:464s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:524s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:501s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:460s fi-skl-x1585l total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:488s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:580s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:1 skip:39 time:424s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_173/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for tests: Add kms_atomic_interruptible test, v3.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: tests: Add kms_atomic_interruptible test, v3.
URL : https://patchwork.freedesktop.org/series/30187/
State : success
== Summary ==
Test kms_setmode:
Subgroup basic:
pass -> FAIL (shard-hsw) fdo#99912
Test perf:
Subgroup polling:
pass -> FAIL (shard-hsw) fdo#102252 +1
Test gem_eio:
Subgroup in-flight:
pass -> FAIL (shard-hsw) fdo#102616fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#102616 https://bugs.freedesktop.org/show_bug.cgi?id=102616
shard-hsw total:2308 pass:1241 dwarn:0 dfail:0 fail:15 skip:1052 time:9533s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_173/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx