Skip to contentSkip to conversation

ARM: dts: Configure earlycon for n8x0

PATCH New Tony Lindgren 1 participant 3 messages Sep 20, 2017 1 message not in the archive Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ARM: dts: Configure earlycon for n8x0

With commit 8dd6666f4937 ("ARM: OMAP2+: omap_hwmod: Add support for earlycon") we can now get debug information early if something goes wrong as long as kernel command line has earlycon in it. Let's enable it for n8x0.

---
 arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/boot/dts/omap2420-n8x0-common.dtsi +4 -0
@@ -6,6 +6,10 @@
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	ocp {
 		i2c0 {
 			compatible = "i2c-cbus-gpio";
Signature · 5 lines
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 20170920144324.1978-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org

#2 lore raw

PATCH 2/3 ARM: dts: Configure earlycon for pandaboard

With commit 8dd6666f4937 ("ARM: OMAP2+: omap_hwmod: Add support for earlycon") we can now get debug information early if something goes wrong as long as kernel command line has earlycon in it. Let's enable it for pandaboards as they all have a debug uart at uart3.

---
 arch/arm/boot/dts/omap4-panda-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/boot/dts/omap4-panda-common.dtsi +4 -0
@@ -13,6 +13,10 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	aliases {
 		display0 = &dvi0;
 		display1 = &hdmi0;
Signature · 5 lines
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#3 lore raw

PATCH 3/3 ARM: dts: Configure earlycon for omap5-common

In reply to a message not in the archive

With commit 8dd6666f4937 ("ARM: OMAP2+: omap_hwmod: Add support for earlycon") we can now get debug information early if something goes wrong as long as kernel command line has earlycon in it. Let's enable it for omap5-common as all these have debug uart at uart3.

---
 arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/boot/dts/omap5-board-common.dtsi +4 -0
@@ -14,6 +14,10 @@
 		display0 = &hdmi0;
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	vmain: fixedregulator-vmain {
 		compatible = "regulator-fixed";
 		regulator-name = "vmain";
Signature · 5 lines
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html