Skip to contentSkip to conversation

ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO

PATCH New Fabio Estevam 2 participants 2 messages Sep 17, 2017 – Sep 22, 2017

Subsystems (2)
Arm (32-bit) Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO

From: Fabio Estevam <[email protected]>

In order to get ADV7180 analog video decoder to probe on a Gateworks GW51xx we need select CONFIG_MUX_MMIO, otherwise /dev/media node does not get created.

Select CONFIG_MUX_MMIO, so that the ADV7180 driver can be correctly probed.

Reported-by Tim Harvey <[email protected]>
Suggested-by Steve Longerbeam <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/imx_v6_v7_defconfig +1 -0
index 32acac9..addac53 100644
@@ -365,6 +365,7 @@ CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
 CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
Signature · 1 line
2.7.4
Applied
#1 lore raw

PATCH 1/1 ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO

Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

In order to get ADV7180 analog video decoder to probe on a Gateworks GW51xx we need select CONFIG_MUX_MMIO, otherwise /dev/media node does not get created.

Quoted 6 lines

Select CONFIG_MUX_MMIO, so that the ADV7180 driver can be correctly probed.

Reported-by Tim Harvey <[email protected]>
Suggested-by Steve Longerbeam <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks.