Skip to contentSkip to conversation

arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

PATCH Superseded Miquel Raynal 2 participants 3 messages Sep 22, 2017

Subsystems (2)
Device tree bindings Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Miquel Raynal

author
#0 lore raw

PATCH v2 1/1 arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

From: Christine Gharzuzi <[email protected]>

Add the DT node enabling Armada-8040-DB CPS SPI controller driver.

Add the SPI NAND flash device connected on the bus. Fill the MTD partitions layout.

Signed-off-by Christine Gharzuzi <[email protected]>
Signed-off-by Miquel Raynal <[email protected]>
---
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 31 ++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
arch/arm64/boot/dts/marvell/armada-8040-db.dts +31 -0
index 0d7b2ae46610..f5be6ffe0106 100644
@@ -216,6 +216,37 @@
 	clock-frequency = <100000>;
 };
 
+&cps_spi1 {
+	status = "okay";
+
+	spi-flash at 0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "Boot";
+				reg = <0x0 0x200000>;
+			};
+			partition at 200000 {
+				label = "Filesystem";
+				reg = <0x200000 0xd00000>;
+			};
+			partition at d00000 {
+				label = "Boot_2nd";
+				reg = <0xf00000 0x100000>;
+			};
+		};
+	};
+};
+
 /* CON4 on CP1 expansion */
 &cps_sata0 {
 	status = "okay";
Signature · 1 line
2.11.0
maintainer
#1 lore raw

PATCH v2 1/1 arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

Quoted 10 lines · Miquel Raynal

From: Christine Gharzuzi <[email protected]>

Add the DT node enabling Armada-8040-DB CPS SPI controller driver.

Add the SPI NAND flash device connected on the bus. Fill the MTD partitions layout.

Signed-off-by Christine Gharzuzi <[email protected]>
Signed-off-by Miquel Raynal <[email protected]>

---

Hi Miquel

Please put under the --- what you changed between v1 and v2. It helps make the reviewing easier.

Thanks
Andrew

author
#2 lore raw

PATCH v2 1/1 arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

Hi Andrew,

Quoted 8 lines · On Fri, 22 Sep 2017 15:00:22 +0200 Andrew Lunn <[email protected]> wrote:
Quoted 7 lines · Miquel Raynal

From: Christine Gharzuzi <[email protected]>

Add the DT node enabling Armada-8040-DB CPS SPI controller driver.

Add the SPI NAND flash device connected on the bus. Fill the MTD partitions layout.

Quoted 8 lines
Quoted 3 lines
Signed-off-by Christine Gharzuzi <[email protected]>
Signed-off-by Miquel Raynal <[email protected]>

---

Hi Miquel

Please put under the --- what you changed between v1 and v2. It helps make the reviewing easier.

Sure.

Plus, I just realized I sent the v1 patch instead of the v2. Sorry for that.

Thanks,
Miqu?l

Quoted 3 lines

Thanks
Andrew

Signature · 3 lines
Miquel Raynal, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com