Introduce DVFS.
Subsystems (2)
Rodrigo Vivi
maintainercover Introduce DVFS.
This Display Voltage and Frequency Switching Sequence exist for a while, but now on CNL it got a separated doc in spec and more attention since it is required to be called for more places.
So this series from Paulo and mostly from Mika addresses the changes required specially for CNL.
Last patch in the series is optional and only aims to avoid code duplication on SKL code. I know that this could be the first thing in the series or squashed to Paulo's initial patch, but since this is optional and I didn't wan't to disrupt and change the original code from Paulo and Mika, I decided to do as the last patch on top of their original work.
Thanks,
Rodrigo.
Kahola, Mika (3):
drm/i915/cnl: Expose DVFS change functions
drm/i915/cnl: DVFS for PLL enabling
drm/i915/cnl: DVFS for PLL disabling
Paulo Zanoni (1):
drm/i915/cnl: extract cnl_dvfs_{pre,post}_change
Rodrigo Vivi (1):
drm/i915: Extend DVFS function back to Skylake.
drivers/gpu/drm/i915/intel_cdclk.c | 50 ++++++++++++------------ drivers/gpu/drm/i915/intel_dpll_mgr.c | 71 +++++++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_drv.h | 2 + 3 files changed, 82 insertions(+), 41 deletions(-)
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 1/5 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
From: Paulo Zanoni <[email protected]>
These functions even have their own page in our spec, so extract them from cnl_set_cdclk().
--- drivers/gpu/drm/i915/intel_cdclk.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +23 -10
@@ -1510,12 +1510,8 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) dev_priv->cdclk.hw.vco = vco; } -static void cnl_set_cdclk (struct drm_i915_private *dev_priv, -const struct intel_cdclk_state *cdclk_state) +static int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv) { -int cdclk = cdclk_state->cdclk; -int vco = cdclk_state->vco; -u32 val, divider, pcu_ack;int ret;mutex_lock (&dev_priv->rps.hw_lock);
@@ -1524,11 +1520,30 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,SKL_CDCLK_READY_FOR_CHANGE , SKL_CDCLK_READY_FOR_CHANGE, 3);mutex_unlock (&dev_priv->rps.hw_lock); -if (ret) { + +if (ret)DRM_ERROR ("Failed to inform PCU about cdclk change (%d)\n" , ret); + +return ret; +} + +static void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level) +{ +mutex_lock (&dev_priv->rps.hw_lock); +sandybridge_pcode_write (dev_priv,SKL_PCODE_CDCLK_CONTROL , level); +mutex_unlock (&dev_priv->rps.hw_lock); +} + +static void cnl_set_cdclk (struct drm_i915_private *dev_priv, +const struct intel_cdclk_state *cdclk_state) +{ +int cdclk = cdclk_state->cdclk; +int vco = cdclk_state->vco; +u32 val, divider, pcu_ack; + +if (!cnl_dvfs_pre_change (dev_priv))return ; - }/* cdclk = vco / 2 / div{1,2} */ switch (DIV_ROUND_CLOSEST (vco, cdclk)) {
@@ -1575,9 +1590,7 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,I915_WRITE (CDCLK_CTL , val);/* inform PCU of the change */ -mutex_lock (&dev_priv->rps.hw_lock); -sandybridge_pcode_write (dev_priv,SKL_PCODE_CDCLK_CONTROL , pcu_ack); -mutex_unlock (&dev_priv->rps.hw_lock); +cnl_dvfs_post_change (dev_priv, pcu_ack);intel_update_cdclk (dev_priv); }
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 2/5 drm/i915/cnl: Expose DVFS change functions
In reply to Rodrigo ViviFrom: "Kahola, Mika" <[email protected]>
DVFS computation needs cnl_dvfs_{pre,post}_change() functions to be exposed. These functions will be used when computing DVFS levels in intel_dpll_mgr.c
--- drivers/gpu/drm/i915/intel_cdclk.c | 4 ++-- drivers/gpu/drm/i915/intel_drv.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +2 -2
@@ -1510,7 +1510,7 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) dev_priv->cdclk.hw.vco = vco; } -static int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv) +int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv) {int ret;
@@ -1528,7 +1528,7 @@ static int cnl_dvfs_pre_change(struct drm_i915_private *dev_priv)return ret; } -static void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level) +void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level) {mutex_lock (&dev_priv->rps.hw_lock);sandybridge_pcode_write (dev_priv,SKL_PCODE_CDCLK_CONTROL , level);
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -1322,6 +1322,8 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv);void skl_uninit_cdclk (struct drm_i915_private *dev_priv);void cnl_init_cdclk (struct drm_i915_private *dev_priv);void cnl_uninit_cdclk (struct drm_i915_private *dev_priv); +int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv); +void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level);void bxt_init_cdclk (struct drm_i915_private *dev_priv);void bxt_uninit_cdclk (struct drm_i915_private *dev_priv);void intel_init_cdclk_hooks (struct drm_i915_private *dev_priv);
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 3/5 drm/i915/cnl: DVFS for PLL enabling
In reply to Rodrigo ViviFrom: "Kahola, Mika" <[email protected]>
Display Voltage and Frequency Switching (DVFS) is used to adjust the display voltage to match the display clock frequencies. If voltage is set too low, it will break functionality. If voltage is set too high, it will waste power. Voltage level is selected based on CD clock and DDI clock.
The sequence before frequency change is the following and it requests the power controller to raise voltage to maximum
- Ensure any previous GT Driver Mailbox transaction is complete.
- Write GT Driver Mailbox Data Low = 0x3.
- Write GT Driver Mailbox Data High = 0x0.
- Write GT Driver Mailbox Interface = 0x80000007.
- Poll GT Driver Mailbox Interface for Run/Busy indication cleared (bit 31 = 0).
- Read GT Driver Mailbox Data Low, if bit 0 is 0x1, continue, else restart the sequence. Timeout after 3ms
The sequence after frequency change is the following and it requests the port controller to raise voltage to the requested level.
- Write GT Driver Mailbox Data Low
* For level 0, write 0x0
* For level 1, write 0x1
* For level 2, write 0x2
* For level 3, write 0x3
- Write GT Driver Mailbox Data High = 0x0.
- Write GT Driver Mailbox Interface = 0x80000007.
For Cannonlake, the level 3 is not used and it aliases to level 2.
v2: reuse Paulo's work on cdclk. This patch depends on Paulo's patch
[PATCH 02/12] drm/i915/cnl: extract cnl_dvfs_{pre,post}_changev3: (By Rodrigo): Remove duplicated commend and fix typo on Paulo's name.
--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 57 ++++++++++++++++++++++++++++++----- 1 file changed, 49 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_dpll_mgr.c +49 -8
@@ -1966,10 +1966,48 @@ static const struct intel_dpll_mgr bxt_pll_mgr = { .dump_hw_state = bxt_dump_hw_state, }; +static int cnl_get_port_clock (uint32_t val) +{ +if (val &DPLL_CFGCR0_LINK_RATE_810 ) +return 2 *81000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_1350 ) +return 2 *135000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_2700 ) +return 2 *270000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_1620 ) +return 2 *162000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_1080 ) +return 2 *108000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_2160 ) +return 2 *216000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_3240 ) +return 2 *324000 ; +else if (val &DPLL_CFGCR0_LINK_RATE_4050 ) +return 2 *405000 ; + +return -EINVAL ; +} + +static int cnl_get_dvfs_level (int cdclk,int portclk) +{ +if (portclk == -EINVAL ) +return 2 ; + +if (cdclk ==168000 && portclk <594000 ) +return 0 ; +else if (cdclk ==336000 && portclk <594000 ) +return 1 ; +else +return 2 ; +} +static void cnl_ddi_pll_enable (struct drm_i915_private *dev_priv,struct intel_shared_dpll *pll) {uint32_t val; +int ret; +int level; +int cdclk, portclk;/* 1. Enable DPLL power in DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
@@ -2006,11 +2044,9 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,/* * 5. If the frequency will result in a change to the voltage * requirement, follow the Display Voltage Frequency Switching -* Sequence Before Frequency Change -* -* FIXME: (DVFS) is used to adjust the display voltage to match the -* display clock frequencies +* (DVFS) Sequence Before Frequency Change */ + ret =cnl_dvfs_pre_change (dev_priv);/* 6. Enable DPLL in DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
@@ -2028,11 +2064,16 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,/* * 8. If the frequency will result in a change to the voltage * requirement, follow the Display Voltage Frequency Switching -* Sequence After Frequency Change -* -* FIXME: (DVFS) is used to adjust the display voltage to match the -* display clock frequencies +* (DVFS) Sequence After Frequency Change */ +if (ret ==0 ) { + val = pll->state.hw_state.cfgcr0; + cdclk = dev_priv->cdclk.hw.cdclk; + portclk =cnl_get_port_clock (val); + + level =cnl_get_dvfs_level (cdclk, portclk); +cnl_dvfs_post_change (dev_priv, level); + }/* * 9. turn on the clock for the DDI and map the DPLL to the DDI
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 4/5 drm/i915/cnl: DVFS for PLL disabling
In reply to Rodrigo ViviFrom: "Kahola, Mika" <[email protected]>
Display Voltage and Frequency Switching (DVFS) is used to adjust the display voltage to match the display clock frequencies. To save power the voltage is set to minimum when disabling PLL.
The sequence before frequency change is the following and it requests the power controller to raise voltage to maximum
- Ensure any previous GT Driver Mailbox transaction is complete.
- Write GT Driver Mailbox Data Low = 0x3.
- Write GT Driver Mailbox Data High = 0x0.
- Write GT Driver Mailbox Interface = 0x80000007.
- Poll GT Driver Mailbox Interface for Run/Busy indication cleared (bit 31 = 0).
- Read GT Driver Mailbox Data Low, if bit 0 is 0x1, continue, else restart the sequence. Timeout after 3ms
The sequence after frequency change is the following and it requests the port controller to lower voltage to the minimum.
- Write GT Driver Mailbox Data Low = 0x0
- Write GT Driver Mailbox Data High = 0x0.
- Write GT Driver Mailbox Interface = 0x80000007.
v2: reuse Paulo's work on cdclk. This patch depends on Paulo's patch
[PATCH 02/12] drm/i915/cnl: extract cnl_dvfs_{pre,post}_changev3: (By Rodrigo): Fix typo on Paulo's name.
--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_dpll_mgr.c +6 -8
@@ -2085,6 +2085,7 @@ static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv, struct intel_shared_dpll *pll) {uint32_t val; +int ret;/* * 1. Configure DPCLKA_CFGCR0 to turn off the clock for the DDI.
@@ -2094,11 +2095,9 @@ static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv,/* * 2. If the frequency will result in a change to the voltage * requirement, follow the Display Voltage Frequency Switching -* Sequence Before Frequency Change -* -* FIXME: (DVFS) is used to adjust the display voltage to match the -* display clock frequencies +* (DVFS) Sequence Before Frequency Change */ + ret =cnl_dvfs_pre_change (dev_priv);/* 3. Disable DPLL through DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
@@ -2116,11 +2115,10 @@ static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv,/* * 5. If the frequency will result in a change to the voltage * requirement, follow the Display Voltage Frequency Switching -* Sequence After Frequency Change -* -* FIXME: (DVFS) is used to adjust the display voltage to match the -* display clock frequencies +* (DVFS) Sequence After Frequency Change */ +if (ret ==0 ) +cnl_dvfs_post_change (dev_priv,0 );/* 6. Disable DPLL power in DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerPATCH 5/5 drm/i915: Extend DVFS function back to Skylake.
In reply to Rodrigo ViviAlthough SKL Spec doesn't explicit call this sequence as DVFS, that is exactly what it is.
So let's remove a bit of code duplication and re-use CNL functions.
No functional change.
--- drivers/gpu/drm/i915/intel_cdclk.c | 25 ++++++------------------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 8 ++++---- drivers/gpu/drm/i915/intel_drv.h | 4 ++-- 3 files changed, 12 insertions(+), 25 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +6 -19
@@ -924,21 +924,10 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,int cdclk = cdclk_state->cdclk;int vco = cdclk_state->vco;u32 freq_select, pcu_ack; -int ret;WARN_ON ((cdclk ==24000 ) != (vco ==0 )); -mutex_lock (&dev_priv->rps.hw_lock); - ret =skl_pcode_request (dev_priv,SKL_PCODE_CDCLK_CONTROL , -SKL_CDCLK_PREPARE_FOR_CHANGE , -SKL_CDCLK_READY_FOR_CHANGE , -SKL_CDCLK_READY_FOR_CHANGE ,3 ); -mutex_unlock (&dev_priv->rps.hw_lock); -if (ret) { -DRM_ERROR ("Failed to inform PCU about cdclk change (%d)\n" , - ret); -return ; - } +skl_dvfs_pre_change (dev_priv);/* set CDCLK_CTL */ switch (cdclk) {
@@ -975,9 +964,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,POSTING_READ (CDCLK_CTL );/* inform PCU of the change */ -mutex_lock (&dev_priv->rps.hw_lock); -sandybridge_pcode_write (dev_priv,SKL_PCODE_CDCLK_CONTROL , pcu_ack); -mutex_unlock (&dev_priv->rps.hw_lock); +skl_dvfs_post_change (dev_priv, pcu_ack);intel_update_cdclk (dev_priv); }
@@ -1510,7 +1497,7 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) dev_priv->cdclk.hw.vco = vco; } -int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv) +int skl_dvfs_pre_change (struct drm_i915_private *dev_priv) {int ret;
@@ -1528,7 +1515,7 @@ int cnl_dvfs_pre_change(struct drm_i915_private *dev_priv)return ret; } -void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level) +void skl_dvfs_post_change (struct drm_i915_private *dev_priv,int level) {mutex_lock (&dev_priv->rps.hw_lock);sandybridge_pcode_write (dev_priv,SKL_PCODE_CDCLK_CONTROL , level);
@@ -1542,7 +1529,7 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,int vco = cdclk_state->vco;u32 val, divider, pcu_ack; -if (!cnl_dvfs_pre_change (dev_priv)) +if (!skl_dvfs_pre_change (dev_priv))return ;/* cdclk = vco / 2 / div{1,2} */
@@ -1590,7 +1577,7 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,I915_WRITE (CDCLK_CTL , val);/* inform PCU of the change */ -cnl_dvfs_post_change (dev_priv, pcu_ack); +skl_dvfs_post_change (dev_priv, pcu_ack);intel_update_cdclk (dev_priv); }
drivers/gpu/drm/i915/intel_dpll_mgr.c +4 -4
@@ -2046,7 +2046,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,* requirement, follow the Display Voltage Frequency Switching * (DVFS) Sequence Before Frequency Change */ - ret =cnl_dvfs_pre_change (dev_priv); + ret =skl_dvfs_pre_change (dev_priv);/* 6. Enable DPLL in DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
@@ -2072,7 +2072,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv, portclk =cnl_get_port_clock (val); level =cnl_get_dvfs_level (cdclk, portclk); -cnl_dvfs_post_change (dev_priv, level); +skl_dvfs_post_change (dev_priv, level); }/*
@@ -2097,7 +2097,7 @@ static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv,* requirement, follow the Display Voltage Frequency Switching * (DVFS) Sequence Before Frequency Change */ - ret =cnl_dvfs_pre_change (dev_priv); + ret =skl_dvfs_pre_change (dev_priv);/* 3. Disable DPLL through DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
@@ -2118,7 +2118,7 @@ static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv,* (DVFS) Sequence After Frequency Change */ if (ret ==0 ) -cnl_dvfs_post_change (dev_priv,0 ); +skl_dvfs_post_change (dev_priv,0 );/* 6. Disable DPLL power in DPLL_ENABLE. */ val =I915_READ (CNL_DPLL_ENABLE (pll->id));
drivers/gpu/drm/i915/intel_drv.h +2 -2
@@ -1320,10 +1320,10 @@ void intel_audio_deinit(struct drm_i915_private *dev_priv);int intel_crtc_compute_min_cdclk (const struct intel_crtc_state *crtc_state);void skl_init_cdclk (struct drm_i915_private *dev_priv);void skl_uninit_cdclk (struct drm_i915_private *dev_priv); +int skl_dvfs_pre_change (struct drm_i915_private *dev_priv); +void skl_dvfs_post_change (struct drm_i915_private *dev_priv,int level);void cnl_init_cdclk (struct drm_i915_private *dev_priv);void cnl_uninit_cdclk (struct drm_i915_private *dev_priv); -int cnl_dvfs_pre_change (struct drm_i915_private *dev_priv); -void cnl_dvfs_post_change (struct drm_i915_private *dev_priv,int level);void bxt_init_cdclk (struct drm_i915_private *dev_priv);void bxt_uninit_cdclk (struct drm_i915_private *dev_priv);void intel_init_cdclk_hooks (struct drm_i915_private *dev_priv);
Signature · 6 lines
2.13.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : success
== Summary ==
Series 30922v1 Introduce DVFS.
https://patchwork.freedesktop.org/api/1.0/series/30922/revisions/1/mbox/
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> DMESG-WARN (fi-glk-1) fdo#102777fdo#102777 https://bugs.freedesktop.org/show_bug.cgi?id=102777
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:443s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:480s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:421s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:538s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:279s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:503s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:505s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:497s fi-cfl-s total:289 pass:222 dwarn:35 dfail:0 fail:0 skip:32 time:539s fi-cnl-y total:289 pass:208 dwarn:12 dfail:31 fail:6 skip:31 time:652s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:424s fi-glk-1 total:289 pass:259 dwarn:1 dfail:0 fail:0 skip:29 time:569s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:427s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:406s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:440s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:491s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:465s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:478s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:578s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:592s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:547s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:455s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:761s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:495s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:480s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:571s fi-snb-2600 total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:421s
c4c623d58e38d49e692dc9141250b35e39170e6b drm-tip: 2017y-09m-26d-16h-37m-12s UTC integration manifest 6dd2e3d2f1dc drm/i915: Extend DVFS function back to Skylake.0b6ee028eacd drm/i915/cnl: DVFS for PLL disablingd53bc8bce9dc drm/i915/cnl: DVFS for PLL enabling5f4344381ec4 drm/i915/cnl: Expose DVFS change functionsefb033fbb119 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5823/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : success
== Summary ==
Test kms_setmode:
Subgroup basic:
fail -> PASS (shard-hsw) fdo#99912
Test kms_flip:
Subgroup flip-vs-expired-vblank:
fail -> PASS (shard-hsw) fdo#102367
Subgroup plain-flip-ts-check-interruptible:
fail -> PASS (shard-hsw)
Test perf:
Subgroup polling:
pass -> FAIL (shard-hsw) fdo#102252fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102367 https://bugs.freedesktop.org/show_bug.cgi?id=102367
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-hsw total:2429 pass:1335 dwarn:1 dfail:0 fail:10 skip:1083 time:9986s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5823/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : success
== Summary ==
Series 30922v1 Introduce DVFS.
https://patchwork.freedesktop.org/api/1.0/series/30922/revisions/1/mbox/
Test chamelium:
Subgroup dp-crc-fast:
fail -> PASS (fi-kbl-7500u) fdo#102514
Test drv_module_reload:
Subgroup basic-reload:
pass -> DMESG-WARN (fi-glk-1) fdo#102777 +1fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#102777 https://bugs.freedesktop.org/show_bug.cgi?id=102777
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:441s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:473s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:416s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:513s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:278s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:500s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:514s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:491s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:486s fi-cfl-s total:289 pass:256 dwarn:1 dfail:0 fail:0 skip:32 time:566s fi-cnl-y total:289 pass:210 dwarn:12 dfail:31 fail:2 skip:33 time:624s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:412s fi-glk-1 total:289 pass:259 dwarn:1 dfail:0 fail:0 skip:29 time:568s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:426s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:403s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:429s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:488s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:471s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:477s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:577s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:585s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:544s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:452s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:754s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:489s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:474s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:561s fi-snb-2600 total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:418s
0369ecdbb55495dd4671ad33d375f37d0707b629 drm-tip: 2017y-09m-28d-20h-01m-55s UTC integration manifest ac06c12d8d06 drm/i915: Extend DVFS function back to Skylake.451034bed2be drm/i915/cnl: DVFS for PLL disabling6446bda2c77d drm/i915/cnl: DVFS for PLL enabling2484dcc7c187 drm/i915/cnl: Expose DVFS change functions07076582a9a9 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5853/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : failure
== Summary ==
Test perf:
Subgroup blocking:
fail -> PASS (shard-hsw) fdo#102252
Test gem_exec_schedule:
Subgroup preempt-self-vebox:
skip -> INCOMPLETE (shard-hsw)
Test kms_setmode:
Subgroup basic:
pass -> FAIL (shard-hsw) fdo#99912fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
shard-hsw total:2429 pass:1311 dwarn:4 dfail:0 fail:10 skip:1055 time:9896s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5853/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : success
== Summary ==
Series 30922v1 Introduce DVFS.
https://patchwork.freedesktop.org/api/1.0/series/30922/revisions/1/mbox/
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> DMESG-WARN (fi-glk-1) fdo#102777fdo#102777 https://bugs.freedesktop.org/show_bug.cgi?id=102777
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:443s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:480s fi-blb-e6850 total:289 pass:224 dwarn:1 dfail:0 fail:0 skip:64 time:421s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:538s fi-bwr-2160 total:289 pass:184 dwarn:0 dfail:0 fail:0 skip:105 time:279s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:503s fi-byt-j1900 total:289 pass:254 dwarn:1 dfail:0 fail:0 skip:34 time:505s fi-byt-n2820 total:289 pass:250 dwarn:1 dfail:0 fail:0 skip:38 time:497s fi-cfl-s total:289 pass:222 dwarn:35 dfail:0 fail:0 skip:32 time:539s fi-cnl-y total:289 pass:208 dwarn:12 dfail:31 fail:6 skip:31 time:652s fi-elk-e7500 total:289 pass:230 dwarn:0 dfail:0 fail:0 skip:59 time:424s fi-glk-1 total:289 pass:259 dwarn:1 dfail:0 fail:0 skip:29 time:569s fi-hsw-4770 total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:427s fi-hsw-4770r total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:406s fi-ilk-650 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:440s fi-ivb-3520m total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:491s fi-ivb-3770 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:465s fi-kbl-7500u total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:478s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:578s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:592s fi-pnv-d510 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:547s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:455s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:761s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:495s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:480s fi-snb-2520m total:289 pass:251 dwarn:0 dfail:0 fail:0 skip:38 time:571s fi-snb-2600 total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:421s
c4c623d58e38d49e692dc9141250b35e39170e6b drm-tip: 2017y-09m-26d-16h-37m-12s UTC integration manifest 6dd2e3d2f1dc drm/i915: Extend DVFS function back to Skylake.0b6ee028eacd drm/i915/cnl: DVFS for PLL disablingd53bc8bce9dc drm/i915/cnl: DVFS for PLL enabling5f4344381ec4 drm/i915/cnl: Expose DVFS change functionsefb033fbb119 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5823/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Introduce DVFS.
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: Introduce DVFS.
URL : https://patchwork.freedesktop.org/series/30922/
State : failure
== Summary ==
Series 30922v1 Introduce DVFS.
https://patchwork.freedesktop.org/api/1.0/series/30922/revisions/1/mbox/
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> DMESG-WARN (fi-cnl-y) fdo#103036
Subgroup basic-s4-devices:
pass -> DMESG-WARN (fi-cnl-y)
Test gem_flink_basic:
Subgroup bad-flink:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup bad-open:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup basic:
pass -> DMESG-WARN (fi-cnl-y)
Test kms_busy:
Subgroup basic-flip-a:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-b:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-c:
pass -> DMESG-FAIL (fi-cnl-y)
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-busy-flip-before-cursor-legacy:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-after-cursor-atomic:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-after-cursor-legacy:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-after-cursor-varying-size:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-before-cursor-atomic:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-before-cursor-legacy:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup basic-flip-before-cursor-varying-size:
pass -> DMESG-FAIL (fi-cnl-y)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> SKIP (fi-cnl-y)
Subgroup basic-flip-vs-modeset:
pass -> SKIP (fi-cnl-y)
Subgroup basic-flip-vs-wf_vblank:
pass -> SKIP (fi-cnl-y)
Subgroup basic-plain-flip:
pass -> SKIP (fi-cnl-y)
Test kms_frontbuffer_tracking:
Subgroup basic:
pass -> SKIP (fi-cnl-y)
Test kms_pipe_crc_basic:
Subgroup bad-nb-words-1:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup bad-nb-words-3:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup bad-pipe:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup bad-source:
pass -> DMESG-WARN (fi-cnl-y)
Subgroup hang-read-crc-pipe-a:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup hang-read-crc-pipe-b:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup hang-read-crc-pipe-c:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-a:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-a-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-b:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-b-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-c:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup nonblocking-crc-pipe-c-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-a:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-a-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-b:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-b-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-c:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup read-crc-pipe-c-frame-sequence:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-FAIL (fi-cnl-y)
Subgroup suspend-read-crc-pipe-c:
pass -> DMESG-FAIL (fi-cnl-y)
Test kms_psr_sink_crc:
Subgroup psr_basic:
pass -> DMESG-FAIL (fi-cnl-y)Test kms_setmode:
WARNING: Long output truncated
c4c623d58e38d49e692dc9141250b35e39170e6b drm-tip: 2017y-09m-26d-16h-37m-12s UTC integration manifest 6dd2e3d2f1dc drm/i915: Extend DVFS function back to Skylake.0b6ee028eacd drm/i915/cnl: DVFS for PLL disablingd53bc8bce9dc drm/i915/cnl: DVFS for PLL enabling5f4344381ec4 drm/i915/cnl: Expose DVFS change functionsefb033fbb119 drm/i915/cnl: extract cnl_dvfs_{pre, post}_change
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5823/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx