drm/atomic: Remove unneeded null check for private objects
Subsystems (2)
Maarten Lankhorst
maintainerPATCH 1/2 drm/atomic: Remove unneeded null check for private objects
It can be seen in drm_atomic_get_private_obj_state() that ptr will never be NULL, so skip the check for that case.
Signed-off-by Maarten Lankhorst <[email protected]>
--- drivers/gpu/drm/drm_atomic.c | 3 --- include/drm/drm_atomic.h | 9 +++------ 2 files changed, 3 insertions(+), 9 deletions(-)
drivers/gpu/drm/drm_atomic.c +0 -3
@@ -182,9 +182,6 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)for (i =0 ; i < state->num_private_objs; i++) {struct drm_private_obj *obj = state->private_objs[i].ptr; -if (!obj) -continue ; - obj->funcs->atomic_destroy_state (obj, state->private_objs[i].state); state->private_objs[i].ptr =NULL ;
include/drm/drm_atomic.h +3 -6
@@ -768,8 +768,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state, \ (new_obj_state) = (__state)->private_objs[__i].new_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update
@@ -787,8 +786,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update
@@ -806,8 +804,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (new_obj_state) = (__state)->private_objs[__i].new_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * drm_atomic_crtc_needs_modeset - compute combined modeset need
Signature · 6 lines
2.14.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Maarten Lankhorst
maintainerPATCH 2/2 drm/atomic: Make atomic iterators less surprising
Commit 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.") assumed incorrectly that if only 1 plane is matched in the loop, the variables will be set to that plane. In reality we reset them to NULL every time a new plane was iterated. This behavior is surprising, so fix this by making the for loops only assign the variables on a match.
Cc Dmitry Osipenko <[email protected]>
Fixes 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")
Signed-off-by Maarten Lankhorst <[email protected]>
--- include/drm/drm_atomic.h | 85 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 43 deletions(-)
include/drm/drm_atomic.h +42 -43
@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_connector_in_state (__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_old_connector_in_state - iterate over all connectors in an atomic update
@@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_connector_in_state (__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, 1))/** * for_each_new_connector_in_state - iterate over all connectors in an atomic update
@@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_connector_in_state (__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_crtc_in_state (__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_crtc_in_state (__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))/** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_crtc_in_state (__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
@@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_plane_in_state (__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state,\ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_old_plane_in_state - iterate over all planes in an atomic update
@@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_plane_in_state (__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) - + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state, 1))/** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer
@@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_plane_in_state (__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
Signature · 6 lines
2.14.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/atomic: Make atomic iterators less surprising
Quoted 6 lines · Maarten Lankhorst
Commit
669c9215afea("drm/atomic: Make async plane update checks work as intended, v2.") assumed incorrectly that if only 1 plane is matched in the loop, the variables will be set to that plane. In reality we reset them to NULL every time a new plane was iterated. This behavior is surprising, so fix this by making the for loops only assign the variables on a match.
Maybe explain a bit more how that's confusing, namely when we have not added all the planes/crtc/connector to the state, and there's a few NULL ones after the last one we iterated. Which then breaks the assumption that the pointers will hold the values from the last loop iteration, which holds true for all other for_each macros we're using (well except the iterator pointer itself, but that one really is entirely internal).
With that bit of blabla added to the commit message:
Reviewed-by Daniel Vetter <[email protected]>
Quoted 173 lines
Cc Dmitry Osipenko <[email protected]>Fixes 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")Signed-off-by Maarten Lankhorst <[email protected]>--- include/drm/drm_atomic.h | 85 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 43 deletions(-)include/drm/drm_atomic.h +42
-43@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_connector_in_state (__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_old_connector_in_state - iterate over all connectors in an atomic update @@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_connector_in_state (__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, 1))/** * for_each_new_connector_in_state - iterate over all connectors in an atomic update @@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_connector_in_state (__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update @@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_crtc_in_state (__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update @@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_crtc_in_state (__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))/** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update @@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_crtc_in_state (__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update @@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_plane_in_state (__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state,\ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_old_plane_in_state - iterate over all planes in an atomic update @@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_plane_in_state (__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) - + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state, 1))/** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer @@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_plane_in_state (__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update Signature · 6 lines
2.14.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/atomic: Make atomic iterators less surprising
In reply to Maarten LankhorstQuoted 163 lines · Maarten Lankhorst
Commit
669c9215afea("drm/atomic: Make async plane update checks work as intended, v2.") assumed incorrectly that if only 1 plane is matched in the loop, the variables will be set to that plane. In reality we reset them to NULL every time a new plane was iterated. This behavior is surprising, so fix this by making the for loops only assign the variables on a match.Cc Dmitry Osipenko <[email protected]>Fixes 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")Signed-off-by Maarten Lankhorst <[email protected]>--- include/drm/drm_atomic.h | 85 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 43 deletions(-)include/drm/drm_atomic.h +38
-41@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_connector_in_state (__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_old_connector_in_state - iterate over all connectors in an atomic update @@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_connector_in_state (__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, 1))/** * for_each_new_connector_in_state - iterate over all connectors in an atomic update @@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_connector_in_state (__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update @@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_crtc_in_state (__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update @@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_crtc_in_state (__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))/** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update @@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_crtc_in_state (__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update @@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_plane_in_state (__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state,\ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_old_plane_in_state - iterate over all planes in an atomic update @@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_plane_in_state (__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) - + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state, 1))/** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer @@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_plane_in_state (__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \
include/drm/drm_atomic.h void drm_state_dump(struct drm_device *dev, struct drm_printer *p); · line 753
Quoted 10 lines
include/drm/drm_atomic.h +4
-2- (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ -for_each_if (plane) +for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (new_plane_state) = (__state)->planes[__i].new_state,1 ))/** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
This variant also works.
Tested-by Dmitry Osipenko <[email protected]>
Signature · 5 lines
Dmitry _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Maarten Lankhorst
maintainerRe: [PATCH 2/2] drm/atomic: Make atomic iterators less surprising
Op 27-09-17 om 14:53 schreef Dmitry Osipenko:
Quoted 171 lines · Maarten Lankhorst
Quoted 170 lines
Commit
669c9215afea("drm/atomic: Make async plane update checks work as intended, v2.") assumed incorrectly that if only 1 plane is matched in the loop, the variables will be set to that plane. In reality we reset them to NULL every time a new plane was iterated. This behavior is surprising, so fix this by making the for loops only assign the variables on a match.Cc Dmitry Osipenko <[email protected]>Fixes 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")Signed-off-by Maarten Lankhorst <[email protected]>--- include/drm/drm_atomic.h | 85 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 43 deletions(-)include/drm/drm_atomic.h +42
-43@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_connector_in_state (__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_old_connector_in_state - iterate over all connectors in an atomic update @@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_connector_in_state (__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, 1))/** * for_each_new_connector_in_state - iterate over all connectors in an atomic update @@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_connector_in_state (__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update @@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_crtc_in_state (__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update @@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_crtc_in_state (__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))/** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update @@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_crtc_in_state (__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update @@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_plane_in_state (__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state,\ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_old_plane_in_state - iterate over all planes in an atomic update @@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_plane_in_state (__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) - + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state, 1))/** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer @@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_plane_in_state (__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (new_plane_state) = (__state)->planes[__i].new_state, 1))
Quoted 7 lines
include/drm/drm_atomic.h void drm_state_dump(struct drm_device *dev, struct drm_printer *p); · line 753
Quoted 3 lines
include/drm/drm_atomic.h +0
-0/** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update This variant also works.
Tested-by Dmitry Osipenko <[email protected]>
Forgot to hit push, pushed now. :)
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/atomic: Make atomic iterators less surprising
Quoted 172 lines · Maarten Lankhorst
Op 27-09-17 om 14:53 schreef Dmitry Osipenko:
Quoted 171 lines · Maarten Lankhorst
Quoted 170 lines
Commit
669c9215afea("drm/atomic: Make async plane update checks work as intended, v2.") assumed incorrectly that if only 1 plane is matched in the loop, the variables will be set to that plane. In reality we reset them to NULL every time a new plane was iterated. This behavior is surprising, so fix this by making the for loops only assign the variables on a match.Cc Dmitry Osipenko <[email protected]>Fixes 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.")Signed-off-by Maarten Lankhorst <[email protected]>--- include/drm/drm_atomic.h | 85 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 43 deletions(-)include/drm/drm_atomic.h +42
-43@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_connector_in_state (__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_old_connector_in_state - iterate over all connectors in an atomic update @@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_connector_in_state (__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (old_connector_state) = (__state)->connectors[__i].old_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (old_connector_state) = (__state)->connectors[__i].old_state, 1))/** * for_each_new_connector_in_state - iterate over all connectors in an atomic update @@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_connector_in_state (__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->num_connector && \ - ((connector) = (__state)->connectors[__i].ptr, \ - (new_connector_state) = (__state)->connectors[__i].new_state, 1); \ - (__i)++) \ - for_each_if (connector) + (__i) < (__state)->num_connector; \ + (__i)++) \ + for_each_if ((__state)->connectors[__i].ptr && \ + ((connector) = (__state)->connectors[__i].ptr, \ + (new_connector_state) = (__state)->connectors[__i].new_state, 1))/** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update @@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_crtc_in_state (__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update @@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_crtc_in_state (__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))/** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update @@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_crtc_in_state (__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_crtc && \ - ((crtc) = (__state)->crtcs[__i].ptr, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ - for_each_if (crtc) + for_each_if ((__state)->crtcs[__i].ptr && \ + ((crtc) = (__state)->crtcs[__i].ptr, \ + (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))/** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update @@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_oldnew_plane_in_state (__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state,\ + (new_plane_state) = (__state)->planes[__i].new_state, 1))/** * for_each_old_plane_in_state - iterate over all planes in an atomic update @@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_old_plane_in_state (__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (old_plane_state) = (__state)->planes[__i].old_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) - + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (old_plane_state) = (__state)->planes[__i].old_state, 1))/** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer @@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);*/ #define for_each_new_plane_in_state (__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ - (__i) < (__state)->dev->mode_config.num_total_plane && \ - ((plane) = (__state)->planes[__i].ptr, \ - (new_plane_state) = (__state)->planes[__i].new_state, 1); \ + (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ - for_each_if (plane) + for_each_if ((__state)->planes[__i].ptr && \ + ((plane) = (__state)->planes[__i].ptr, \ + (new_plane_state) = (__state)->planes[__i].new_state, 1))
Quoted 9 lines
Quoted 7 lines
include/drm/drm_atomic.h void drm_state_dump(struct drm_device *dev, struct drm_printer *p); · line 753
Quoted 3 lines
include/drm/drm_atomic.h +0
-0/** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update This variant also works.
Tested-by Dmitry Osipenko <[email protected]>Forgot to hit push, pushed now. :)
Awesome, thank you :)
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 4 lines · Maarten Lankhorst
It can be seen in
drm_atomic_get_private_obj_state()that ptr will never be NULL, so skip the check for that case.Signed-off-by Maarten Lankhorst <[email protected]>
Reviewed-by Daniel Vetter <[email protected]>
Quoted 60 lines
--- drivers/gpu/drm/drm_atomic.c | 3 --- include/drm/drm_atomic.h | 9 +++------ 2 files changed, 3 insertions(+), 9 deletions(-)drivers/gpu/drm/drm_atomic.c +0
-3@@ -182,9 +182,6 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)for (i =0 ; i < state->num_private_objs; i++) {struct drm_private_obj *obj = state->private_objs[i].ptr; -if (!obj) -continue ; - obj->funcs->atomic_destroy_state (obj, state->private_objs[i].state); state->private_objs[i].ptr =NULL ;include/drm/drm_atomic.h +3
-6@@ -768,8 +768,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state, \ (new_obj_state) = (__state)->private_objs[__i].new_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update @@ -787,8 +786,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update @@ -806,8 +804,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (new_obj_state) = (__state)->private_objs[__i].new_state,1 ); \ - (__i)++) \ -for_each_if (obj) + (__i)++)/** * drm_atomic_crtc_needs_modeset - compute combined modeset need Signature · 6 lines
2.14.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel