ARM: dts: r8a7743: Add MSIOF[012] support
PATCH 1/1 ARM: dts: r8a7743: Add MSIOF[012] support
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123].
---
This patch depends on the corresponding dt-bindings patch:
* spi: sh-msiof: Add r8a774[35] to the compatible list which has been applied to linux-next already.
Best regards,
Fabrizio
arch/arm/boot/dts/r8a7743.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi +51 -0
@@ -29,6 +29,9 @@ i2c7 = &iic1; i2c8 = &iic3; spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus {
@@ -852,6 +855,54 @@ status = "disabled"; }; + msiof0: spi at e6e20000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi at e6e10000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi at e6e00000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + sdhi0: sd at ee100000 { compatible = "renesas,sdhi-r8a7743"; reg = <0 0xee100000 0 0x328>;
Signature · 1 line
2.7.4
PATCH 1/1 ARM: dts: r8a7745: Add MSIOF[012] support
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123].
---
This patch depends on the corresponding dt-bindings patch:
* spi: sh-msiof: Add r8a774[35] to the compatible list which has been applied to linux-next already.
Best regards,
Fabrizio
arch/arm/boot/dts/r8a7745.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
arch/arm/boot/dts/r8a7745.dtsi +51 -0
@@ -26,6 +26,9 @@ i2c4 = &i2c4; i2c5 = &i2c5; spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus {
@@ -769,6 +772,54 @@ status = "disabled"; }; + msiof0: spi at e6e20000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi at e6e10000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi at e6e00000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + sdhi0: sd at ee100000 { compatible = "renesas,sdhi-r8a7745"; reg = <0 0xee100000 0 0x328>;
Signature · 1 line
2.7.4
PATCH 1/1 ARM: dts: r8a7745: Add MSIOF[012] support
Quoted 5 lines · Fabrizio Castro
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123].
Signed-off-by Fabrizio Castro <[email protected]>Signed-off-by Chris Paterson <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
PATCH 1/1 ARM: dts: r8a7743: Add MSIOF[012] support
In reply to Fabrizio CastroQuoted 5 lines · Fabrizio Castro
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123].
Signed-off-by Fabrizio Castro <[email protected]>Signed-off-by Chris Paterson <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Simon Horman
AppliedPATCH 1/1 ARM: dts: r8a7743: Add MSIOF[012] support
In reply to Fabrizio CastroQuoted 10 lines · Fabrizio Castro
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi. Also, define aliases for spi[123].
Signed-off-by Fabrizio Castro <[email protected]>Signed-off-by Chris Paterson <[email protected]>---
This patch depends on the corresponding dt-bindings patch:
* spi: sh-msiof: Add r8a774[35] to the compatible list which has been applied to linux-next already.
Thanks, applied for v4.15 with Geert's tags.
Thanks for providing a cover letter and threading the patches a reply to the cover letter. This is very helpful.
Please consider enumerating patches in a series. In this case it would be 0/2 for the cover then 1/2 and 2/2 for the patches themselves.