defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support
PATCH 1/1 defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support
On AM43xx HS devices, QSPI boot is XIP and we use a single stage bootloader. Add a defconfig for this.
Signed-off-by Andrew F. Davis <[email protected]>
--- MAINTAINERS | 1 + configs/am43xx_hs_evm_qspi_defconfig | 56 ++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) create mode 100644 configs/am43xx_hs_evm_qspi_defconfig
MAINTAINERS +1 -0
@@ -420,6 +420,7 @@ F: arch/arm/mach-omap2/sec-common.c F: arch/arm/mach-omap2/config_secure.mk F: configs/am335x_hs_evm_defconfig F: configs/am43xx_hs_evm_defconfig +F: configs/am43xx_hs_evm_qspi_defconfig F: configs/am57xx_hs_evm_defconfig F: configs/dra7xx_hs_evm_defconfig F: configs/k2hk_hs_evm_defconfig
configs/am43xx_hs_evm_qspi_defconfig new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.14.1
Quoted 4 lines · Andrew F. Davis
On AM43xx HS devices, QSPI boot is XIP and we use a single stage bootloader. Add a defconfig for this.
Signed-off-by Andrew F. Davis <[email protected]>
This has a bunch of warnings about CONFIG_SYS_NS16550_REG_SIZE and:
Quoted 1 line
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,SERIAL1,QSPI"
Where do we even use CONFIG_SERIAL1 ? Or CONFIG_QSPI? Finally, I think board/ti/am43xx/Kconfig needs to at least borrow the CONS_INDEX logic from board/ti/am335x/Kconfig, if not migrate it to drivers/serial/Kconfig and start depend'ing it in on TI parts. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170929/0c3ccff0/attachment.sig>