h8300: fix defconfig for edosk2674

PATCH New Waldemar Brodkorb 1 participant 1 message Oct 1, 2017

Share & tools

Waldemar Brodkorb

author

2017-10-01 18:32 UTC #0 lore raw

PATCH 1/1 h8300: fix defconfig for edosk2674

This patch is required to create an uImage which boot on Hitachi edosk2674 into a shell. (tested with sash) The patch was tested with 4.4/4.9 LTS kernel. It seems >4.13 contains a regression, which does not allow to boot Linux on the device anymore.

Signed-off-by Waldemar Brodkorb <[email protected]>

---
 arch/h8300/Kconfig.cpu                 | 4 ++++
 arch/h8300/configs/edosk2674_defconfig | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

arch/h8300/Kconfig.cpu +4 -0

index 8d0ff20c749a..1d2ccd1ad556 100644
@@ -96,4 +96,8 @@ config OFFSET
         hex "Load offset"
 	default 0
 
+config RAMBASE
+	hex "RAM base address"
+	default 0x400000
+
 endmenu

arch/h8300/configs/edosk2674_defconfig +1 -1

index 29fda12d5da9..0cc040040292 100644
@@ -18,7 +18,7 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_BLOCK is not set
 CONFIG_H8S_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8s_sim"
+CONFIG_H8300_BUILTIN_DTB="edosk2674"
 # CONFIG_BINFMT_SCRIPT is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set

Signature · 1 line

2.11.0