i2c-omap.c vs. qemu: too much work in one irq (and broken boot)

Hi!

I'm trying to get qemu emulation of Nokia N900 to work, but unfortunately i2c-omap.c breaks boot in the emulator (real hardware works ok).

[    0.837524] omap2-onenand omap2-onenand: initializing on CS0, phys
base 0x01000000, virtual base d00c0000, freq 66 MHz
[    0.838958] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[    0.839752] OneNAND version = 0x0121
[    0.842102] Scanning device for bad blocks
[    1.012451] 6 ofpart partitions found on MTD device omap2-onenand
[    1.013153] Creating 6 MTD partitions on "omap2-onenand":
[    1.014007] 0x000000000000-0x000000020000 : "bootloader"
[    1.018066] 0x000000020000-0x000000080000 : "config"
[    1.020660] 0x000000080000-0x0000000c0000 : "log"
[    1.022827] 0x0000000c0000-0x0000002c0000 : "kernel"
[    1.025848] 0x0000002c0000-0x0000004c0000 : "initfs"
[    1.028106] 0x0000004c0000-0x000010000000 : "rootfs"
[    1.047668] omap_i2c 48070000.i2c: addr: 0x004b, len: 2, flags:
0x0, stop: 1
[    1.048828] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.049530] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050018] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050476] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050872] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.051422] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052001] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052398] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052825] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.053222] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.053619] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054016] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054412] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054840] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)

...

After 100 messages I get "Too much work in one IRQ" message, and then repeat. I tried just disabling omap_i2c in the dts, but 1) its not easy 2) I'd lose quite fundamental functionality.

Ideas welcome.

Best regards,
Pavel

PS: If anyone is interested, this is why working qemu would be useful:
https://wiki.postmarketos.org/wiki/Nokia_N900_(nokia-rx51) . There's a lot of work to be done in the userspace, and swapping SD cards is kind of slow.

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171001/807547fb/attachment.sig>

Hi!

I started bisection. v4.6 works, v4.7 is broken. (It still may be config difference or something).

This looked suspect, so I tried reverting it, but it did not help. And it is only significant change in i2c-omap.c. So... this may be a lot of fun.

commit 126a66caec4a00b8d66dbc3174b0efa905cf68c3

Author: Sebastian Andrzej Siewior <[email protected]>
Date:   Mon Apr 4 16:55:23 2016 +0300

Unfortunately, mmc is broken in v4.6, so its useless for emulation... [ 3.236724] mmc1: error -22 whilst initialising SDIO card

Ideas?
Pavel

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171002/df3ab2e2/attachment.sig>

Hi! You can apply special patch to make mmc work in both qemu and real N900 device for previous kernel versions...

https://github.com/pali/linux-n900/commit/eb080ecdcfc5868d8e36d0f5f42d9cb7f13b4db9

Pali Roh?r
pali.rohar at gmail.com

Hi!

Thanks a lot, this fixes mmc for me.

But I'm still stuck with v4.6 kernel for qemu. Do newer kernels work there for anyone?

Thanks,
Pavel

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171003/dfb777a6/attachment.sig>