3.18.76-stable review

This is the start of the stable review cycle for the 3.18.76 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Oct 18 16:09:03 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.76-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.18.76-rc1

Takashi Iwai <[email protected]>
ALSA: seq: Fix missing NULL check at remove_events ioctl

Johan Hovold <[email protected]>
USB: serial: console: fix use-after-free after failed setup

Shrirang Bagul <[email protected]>

    USB: serial: qcserial: add Dell DW5818, DW5819

Henryk Heisig <[email protected]>
USB: serial: option: add support for TP-Link LTE module

Andreas Engel <[email protected]>

    USB: serial: cp210x: add support for ELV TFD500

Vitaly Mayatskikh <[email protected]>
fix unbalanced page refcounting in bio_map_user_iov

Andreas Gruenbacher <[email protected]>
direct-io: Prevent NULL pointer access in submit_page_section

Andrew Gabbasov <[email protected]>
usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options

Takashi Iwai <[email protected]>
ALSA: caiaq: Fix stray URB at probe error path

Takashi Iwai <[email protected]>
ALSA: seq: Fix copy_from_user() call inside lock

Takashi Iwai <[email protected]>
ALSA: seq: Fix use-after-free at creating a port

Takashi Iwai <[email protected]>
ALSA: usb-audio: Kill stray URB at exiting

Joerg Roedel <[email protected]>
iommu/amd: Finish TLB flush in amd_iommu_unmap()

Kazuya Mizuguchi <[email protected]>
usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet

Haozhong Zhang <[email protected]>
KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit

Herbert Xu <[email protected]>
crypto: shash - Fix zero-length shash ahash digest crash

Jaejoong Kim <[email protected]>
HID: usbhid: fix out-of-bounds bug

Pavel Shilovsky <[email protected]>
CIFS: Reconnect expired SMB sessions

Darrick J. Wong <[email protected]>
ext4: in ext4_seek_{hole,data}, return -ENXIO for negative offsets

-------------

Diffstat:

 Makefile                         |  4 ++--
 arch/x86/kvm/vmx.c               |  2 +-
 block/bio.c                      |  8 ++++++++
 crypto/shash.c                   |  8 +++++---
 drivers/hid/usbhid/hid-core.c    | 12 +++++++++++-
 drivers/iommu/amd_iommu.c        |  1 +
 drivers/usb/gadget/composite.c   |  5 +++++
 drivers/usb/renesas_usbhs/fifo.c |  2 +-
 drivers/usb/serial/console.c     |  1 +
 drivers/usb/serial/cp210x.c      |  1 +
 drivers/usb/serial/option.c      |  2 ++
 drivers/usb/serial/qcserial.c    |  4 ++++
 fs/cifs/cifsglob.h               |  2 ++
 fs/cifs/cifssmb.c                |  7 +++++++
 fs/cifs/connect.c                |  7 +++++++
 fs/cifs/smb2ops.c                | 15 +++++++++++++++
 fs/direct-io.c                   |  3 ++-
 fs/ext4/file.c                   |  4 ++--
 include/sound/seq_virmidi.h      |  1 +
 sound/core/seq/seq_clientmgr.c   |  8 ++++++--
 sound/core/seq/seq_ports.c       |  7 +++++--
 sound/core/seq/seq_virmidi.c     | 27 +++++++++++++++++++--------
 sound/usb/caiaq/device.c         | 12 +++++++++---
 sound/usb/mixer.c                | 12 ++++++++++--
 sound/usb/mixer.h                |  2 ++
 25 files changed, 129 insertions(+), 28 deletions(-)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <[email protected]>

commit 1bd8d6cd3e413d64e543ec3e69ff43e75a1cf1ea upstream.

In the ext4 implementations of SEEK_HOLE and SEEK_DATA, make sure we return -ENXIO for negative offsets instead of banging around inside the extent code and returning -EFSCORRUPTED.

---
 fs/ext4/file.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -399,7 +399,7 @@ static loff_t ext4_seek_data(struct file
 	mutex_lock(&inode->i_mutex);
 
 	isize = i_size_read(inode);
-	if (offset >= isize) {
+	if (offset < 0 || offset >= isize) {
 		mutex_unlock(&inode->i_mutex);
 		return -ENXIO;
 	}

@@ -472,7 +472,7 @@ static loff_t ext4_seek_hole(struct file
 	mutex_lock(&inode->i_mutex);
 
 	isize = i_size_read(inode);
-	if (offset >= isize) {
+	if (offset < 0 || offset >= isize) {
 		mutex_unlock(&inode->i_mutex);
 		return -ENXIO;
 	}

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <[email protected]>

commit 511c54a2f69195b28afb9dd119f03787b1625bb4 upstream.

According to the MS-SMB2 spec (3.2.5.1.6) once the client receives STATUS_NETWORK_SESSION_EXPIRED error code from a server it should reconnect the current SMB session. Currently the client doesn't do that. This can result in subsequent client requests failing by the server. The patch adds an additional logic to the demultiplex thread to identify expired sessions and reconnect them.

---
 fs/cifs/cifsglob.h |    2 ++
 fs/cifs/cifssmb.c  |    7 +++++++
 fs/cifs/connect.c  |    7 +++++++
 fs/cifs/smb2ops.c  |   15 +++++++++++++++
 4 files changed, 31 insertions(+)

@@ -347,6 +347,8 @@ struct smb_version_operations {
 	unsigned int (*calc_smb_size)(void *);
 	/* check for STATUS_PENDING and process it in a positive case */
 	bool (*is_status_pending)(char *, struct TCP_Server_Info *, int);
+	/* check for STATUS_NETWORK_SESSION_EXPIRED */
+	bool (*is_session_expired)(char *);
 	/* send oplock break response */
 	int (*oplock_response)(struct cifs_tcon *, struct cifs_fid *,
 			       struct cifsInodeInfo *);

@@ -1458,6 +1458,13 @@ cifs_readv_receive(struct TCP_Server_Inf
 		return length;
 	server->total_read += length;
 
+	if (server->ops->is_session_expired &&
+	    server->ops->is_session_expired(buf)) {
+		cifs_reconnect(server);
+		wake_up(&server->response_q);
+		return -1;
+	}
+
 	if (server->ops->is_status_pending &&
 	    server->ops->is_status_pending(buf, server, 0)) {
 		discard_remaining_data(server);

@@ -839,6 +839,13 @@ standard_receive3(struct TCP_Server_Info
 		cifs_dump_mem("Bad SMB: ", buf,
 			min_t(unsigned int, server->total_read, 48));
 
+	if (server->ops->is_session_expired &&
+	    server->ops->is_session_expired(buf)) {
+		cifs_reconnect(server);
+		wake_up(&server->response_q);
+		return -1;
+	}
+
 	if (server->ops->is_status_pending &&
 	    server->ops->is_status_pending(buf, server, length))
 		return -1;

@@ -896,6 +896,18 @@ smb2_is_status_pending(char *buf, struct
 	return true;
 }
 
+static bool
+smb2_is_session_expired(char *buf)
+{
+	struct smb2_hdr *hdr = (struct smb2_hdr *)buf;
+
+	if (hdr->Status != STATUS_NETWORK_SESSION_EXPIRED)
+		return false;
+
+	cifs_dbg(FYI, "Session expired\n");
+	return true;
+}
+
 static int
 smb2_oplock_response(struct cifs_tcon *tcon, struct cifs_fid *fid,
 		     struct cifsInodeInfo *cinode)

@@ -1424,6 +1436,7 @@ struct smb_version_operations smb20_oper
 	.close_dir = smb2_close_dir,
 	.calc_smb_size = smb2_calc_size,
 	.is_status_pending = smb2_is_status_pending,
+	.is_session_expired = smb2_is_session_expired,
 	.oplock_response = smb2_oplock_response,
 	.queryfs = smb2_queryfs,
 	.mand_lock = smb2_mand_lock,

@@ -1505,6 +1518,7 @@ struct smb_version_operations smb21_oper
 	.close_dir = smb2_close_dir,
 	.calc_smb_size = smb2_calc_size,
 	.is_status_pending = smb2_is_status_pending,
+	.is_session_expired = smb2_is_session_expired,
 	.oplock_response = smb2_oplock_response,
 	.queryfs = smb2_queryfs,
 	.mand_lock = smb2_mand_lock,

@@ -1587,6 +1601,7 @@ struct smb_version_operations smb30_oper
 	.close_dir = smb2_close_dir,
 	.calc_smb_size = smb2_calc_size,
 	.is_status_pending = smb2_is_status_pending,
+	.is_session_expired = smb2_is_session_expired,
 	.oplock_response = smb2_oplock_response,
 	.queryfs = smb2_queryfs,
 	.mand_lock = smb2_mand_lock,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jaejoong Kim <[email protected]>

commit f043bfc98c193c284e2cd768fefabe18ac2fed9b upstream.

The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds.

In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n].

So check the size of hid descriptor and bNumDescriptors.

	BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20
	Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261

	CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted
	4.14.0-rc1-42251-gebb2c2437d80 #169
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	Workqueue: usb_hub_wq hub_event
	Call Trace:
	__dump_stack lib/dump_stack.c:16
	dump_stack+0x292/0x395 lib/dump_stack.c:52
	print_address_description+0x78/0x280 mm/kasan/report.c:252
	kasan_report_error mm/kasan/report.c:351
	kasan_report+0x22f/0x340 mm/kasan/report.c:409
	__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
	usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004
	hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944
	usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369
	usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
	generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
	usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
	hub_port_connect drivers/usb/core/hub.c:4903
	hub_port_connect_change drivers/usb/core/hub.c:5009
	port_event drivers/usb/core/hub.c:5115
	hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
	process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
	worker_thread+0x221/0x1850 kernel/workqueue.c:2253
	kthread+0x3a1/0x470 kernel/kthread.c:231
	ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

---
 drivers/hid/usbhid/hid-core.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

@@ -959,6 +959,8 @@ static int usbhid_parse(struct hid_devic
 	unsigned int rsize = 0;
 	char *rdesc;
 	int ret, n;
+	int num_descriptors;
+	size_t offset = offsetof(struct hid_descriptor, desc);
 
 	quirks = usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
 			le16_to_cpu(dev->descriptor.idProduct));

@@ -981,10 +983,18 @@ static int usbhid_parse(struct hid_devic
 		return -ENODEV;
 	}
 
+	if (hdesc->bLength < sizeof(struct hid_descriptor)) {
+		dbg_hid("hid descriptor is too short\n");
+		return -EINVAL;
+	}
+
 	hid->version = le16_to_cpu(hdesc->bcdHID);
 	hid->country = hdesc->bCountryCode;
 
-	for (n = 0; n < hdesc->bNumDescriptors; n++)
+	num_descriptors = min_t(int, hdesc->bNumDescriptors,
+	       (hdesc->bLength - offset) / sizeof(struct hid_class_descriptor));
+
+	for (n = 0; n < num_descriptors; n++)
 		if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT)
 			rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength);
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Haozhong Zhang <[email protected]>

commit 8eb3f87d903168bdbd1222776a6b1e281f50513e upstream.

When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid.

The failure may cause trouble. Consider we start
a L1 guest with non-zero L1 PCID in use,

     (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
  a L2 guest with L2 PCID disabled,
     (i.e. L2 CR4.PCIDE == 0)

and following events may happen:

1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4.

2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest.

---
 arch/x86/kvm/vmx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -8904,7 +8904,7 @@ static void load_vmcs12_host_state(struc
 	 * (KVM doesn't change it)- no reason to call set_cr4_guest_host_mask();
 	 */
 	vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK);
-	kvm_set_cr4(vcpu, vmcs12->host_cr4);
+	vmx_set_cr4(vcpu, vmcs12->host_cr4);
 
 	nested_ept_uninit_mmu_context(vcpu);
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kazuya Mizuguchi <[email protected]>

commit 29c7f3e68eec4ae94d85ad7b5dfdafdb8089f513 upstream.

The DREQE bit of the DnFIFOSEL should be set to 1 after the DE bit of USB-DMAC on R-Car SoCs is set to 1 after the USB-DMAC received a zero-length packet. Otherwise, a transfer completion interruption of USB-DMAC doesn't happen. Even if the driver changes the sequence, normal operations (transmit/receive without zero-length packet) will not cause any side-effects. So, this patch fixes the sequence anyway.

---
 drivers/usb/renesas_usbhs/fifo.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -880,9 +880,9 @@ static void xfer_work(struct work_struct
 		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
 
 	usbhs_pipe_running(pipe, 1);
-	usbhsf_dma_start(pipe, fifo);
 	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
+	usbhsf_dma_start(pipe, fifo);
 	usbhs_pipe_enable(pipe);
 
 xfer_work_end:

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <[email protected]>

commit ce76353f169a6471542d999baf3d29b121dce9c0 upstream.

The function only sends the flush command to the IOMMU(s), but does not wait for its completion when it returns. Fix that.

---
 drivers/iommu/amd_iommu.c |    1 +
 1 file changed, 1 insertion(+)

@@ -3381,6 +3381,7 @@ static size_t amd_iommu_unmap(struct iom
 	mutex_unlock(&domain->api_lock);
 
 	domain_flush_tlb_pde(domain);
+	domain_flush_complete(domain);
 
 	return unmap_size;
 }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 124751d5e63c823092060074bd0abaae61aaa9c4 upstream.

USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like:
==================================================================

  BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0
  Call Trace:
   <IRQ>
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x292/0x395 lib/dump_stack.c:52
   print_address_description+0x78/0x280 mm/kasan/report.c:252
   kasan_report_error mm/kasan/report.c:351
   kasan_report+0x23d/0x350 mm/kasan/report.c:409
   __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430
   snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490
   __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
   ....

  Allocated by task 1484:
   save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
   save_stack+0x43/0xd0 mm/kasan/kasan.c:447
   set_track mm/kasan/kasan.c:459
   kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
   kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
   kmalloc ./include/linux/slab.h:493
   kzalloc ./include/linux/slab.h:666
   snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540
   create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516
   snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
   create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59
   snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
   usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618
   ....

  Freed by task 1484:
   save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
   save_stack+0x43/0xd0 mm/kasan/kasan.c:447
   set_track mm/kasan/kasan.c:459
   kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
   slab_free_hook mm/slub.c:1390
   slab_free_freelist_hook mm/slub.c:1412
   slab_free mm/slub.c:2988
   kfree+0xf6/0x2f0 mm/slub.c:3919
   snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244
   snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250
   __snd_device_free+0x1ff/0x380 sound/core/device.c:91
   snd_device_free_all+0x8f/0xe0 sound/core/device.c:244
   snd_card_do_free sound/core/init.c:461
   release_card_device+0x47/0x170 sound/core/init.c:181
   device_release+0x13f/0x210 drivers/base/core.c:814
   ....

Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too.

In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice.

---
 sound/usb/mixer.c |   12 ++++++++++--
 sound/usb/mixer.h |    2 ++
 2 files changed, 12 insertions(+), 2 deletions(-)

@@ -2157,6 +2157,9 @@ static int parse_audio_unit(struct mixer
 
 static void snd_usb_mixer_free(struct usb_mixer_interface *mixer)
 {
+	/* kill pending URBs */
+	snd_usb_mixer_disconnect(mixer);
+
 	kfree(mixer->id_elems);
 	if (mixer->urb) {
 		kfree(mixer->urb->transfer_buffer);

@@ -2501,8 +2504,13 @@ void snd_usb_mixer_disconnect(struct lis
 /* stop any bus activity of a mixer */
 static void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer)
 {
-	usb_kill_urb(mixer->urb);
-	usb_kill_urb(mixer->rc_urb);
+	if (mixer->disconnected)
+		return;
+	if (mixer->urb)
+		usb_kill_urb(mixer->urb);
+	if (mixer->rc_urb)
+		usb_kill_urb(mixer->rc_urb);
+	mixer->disconnected = true;
 }
 
 static int snd_usb_mixer_activate(struct usb_mixer_interface *mixer)

@@ -23,6 +23,8 @@ struct usb_mixer_interface {
 
 	u8 audigy2nx_leds[3];
 	u8 xonar_u1_status;
+
+	bool disconnected;
 };
 
 #define MAX_CHANNELS	16	/* max logical channels */

Ah, my fault for missing the build warning, thanks for the update, now applied and pushed out.

greg k-h

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 71105998845fb012937332fe2e806d443c09e026 upstream.

There is a potential race window opened at creating and deleting a port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates a port object and returns its pointer, but it doesn't take the refcount, thus it can be deleted immediately by another thread. Meanwhile, snd_seq_ioctl_create_port() still calls the function snd_seq_system_client_ev_port_start() with the created port object that is being deleted, and this triggers use-after-free like:

 BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1
 =============================================================================
 BUG kmalloc-512 (Tainted: G    B          ): kasan: bad access detected
 -----------------------------------------------------------------------------
 INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511
 	___slab_alloc+0x425/0x460
 	__slab_alloc+0x20/0x40
  	kmem_cache_alloc_trace+0x150/0x190
	snd_seq_create_port+0x94/0x9b0 [snd_seq]
	snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq]
 	snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
 	snd_seq_ioctl+0x40/0x80 [snd_seq]
 	do_vfs_ioctl+0x54b/0xda0
 	SyS_ioctl+0x79/0x90
 	entry_SYSCALL_64_fastpath+0x16/0x75
 INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717
 	__slab_free+0x204/0x310
 	kfree+0x15f/0x180
 	port_delete+0x136/0x1a0 [snd_seq]
 	snd_seq_delete_port+0x235/0x350 [snd_seq]
 	snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq]
 	snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
 	snd_seq_ioctl+0x40/0x80 [snd_seq]
 	do_vfs_ioctl+0x54b/0xda0
 	SyS_ioctl+0x79/0x90
 	entry_SYSCALL_64_fastpath+0x16/0x75
 Call Trace:
  [<ffffffff81b03781>] dump_stack+0x63/0x82
  [<ffffffff81531b3b>] print_trailer+0xfb/0x160
  [<ffffffff81536db4>] object_err+0x34/0x40
  [<ffffffff815392d3>] kasan_report.part.2+0x223/0x520
  [<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
  [<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30
  [<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
  [<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq]
  [<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0
  [<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
  [<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq]
  [<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80
  [<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0
  .....

We may fix this in a few different ways, and in this patch, it's fixed simply by taking the refcount properly at snd_seq_create_port() and letting the caller unref the object after use. Also, there is another potential use-after-free by sprintf() call in snd_seq_create_port(), and this is moved inside the lock.

This fix covers CVE-2017-15265.

---
 sound/core/seq/seq_clientmgr.c |    6 +++++-
 sound/core/seq/seq_ports.c     |    7 +++++--
 2 files changed, 10 insertions(+), 3 deletions(-)

@@ -1260,6 +1260,7 @@ static int snd_seq_ioctl_create_port(str
 	struct snd_seq_client_port *port;
 	struct snd_seq_port_info info;
 	struct snd_seq_port_callback *callback;
+	int port_idx;
 
 	if (copy_from_user(&info, arg, sizeof(info)))
 		return -EFAULT;

@@ -1273,7 +1274,9 @@ static int snd_seq_ioctl_create_port(str
 		return -ENOMEM;
 
 	if (client->type == USER_CLIENT && info.kernel) {
-		snd_seq_delete_port(client, port->addr.port);
+		port_idx = port->addr.port;
+		snd_seq_port_unlock(port);
+		snd_seq_delete_port(client, port_idx);
 		return -EINVAL;
 	}
 	if (client->type == KERNEL_CLIENT) {

@@ -1295,6 +1298,7 @@ static int snd_seq_ioctl_create_port(str
 
 	snd_seq_set_port_info(port, &info);
 	snd_seq_system_client_ev_port_start(port->addr.client, port->addr.port);
+	snd_seq_port_unlock(port);
 
 	if (copy_to_user(arg, &info, sizeof(info)))
 		return -EFAULT;

@@ -122,7 +122,9 @@ static void port_subs_info_init(struct s
 }
 
 
-/* create a port, port number is returned (-1 on failure) */
+/* create a port, port number is returned (-1 on failure);
+ * the caller needs to unref the port via snd_seq_port_unlock() appropriately
+ */
 struct snd_seq_client_port *snd_seq_create_port(struct snd_seq_client *client,
 						int port)
 {

@@ -151,6 +153,7 @@ struct snd_seq_client_port *snd_seq_crea
 	snd_use_lock_init(&new_port->use_lock);
 	port_subs_info_init(&new_port->c_src);
 	port_subs_info_init(&new_port->c_dest);
+	snd_use_lock_use(&new_port->use_lock);
 
 	num = port >= 0 ? port : 0;
 	mutex_lock(&client->ports_mutex);

@@ -165,9 +168,9 @@ struct snd_seq_client_port *snd_seq_crea
 	list_add_tail(&new_port->list, &p->list);
 	client->num_ports++;
 	new_port->addr.port = num;	/* store the port number in the port */
+	sprintf(new_port->name, "port-%d", num);
 	write_unlock_irqrestore(&client->ports_lock, flags);
 	mutex_unlock(&client->ports_mutex);
-	sprintf(new_port->name, "port-%d", num);
 
 	return new_port;
 }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 5803b023881857db32ffefa0d269c90280a67ee0 upstream.

The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock.

The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case.

Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open().

---
 include/sound/seq_virmidi.h  |    1 +
 sound/core/seq/seq_virmidi.c |   27 +++++++++++++++++++--------
 2 files changed, 20 insertions(+), 8 deletions(-)

@@ -60,6 +60,7 @@ struct snd_virmidi_dev {
 	int port;			/* created/attached port */
 	unsigned int flags;		/* SNDRV_VIRMIDI_* */
 	rwlock_t filelist_lock;
+	struct rw_semaphore filelist_sem;
 	struct list_head filelist;
 };
 

@@ -77,13 +77,17 @@ static void snd_virmidi_init_event(struc
  * decode input event and put to read buffer of each opened file
  */
 static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
-					 struct snd_seq_event *ev)
+					 struct snd_seq_event *ev,
+					 bool atomic)
 {
 	struct snd_virmidi *vmidi;
 	unsigned char msg[4];
 	int len;
 
-	read_lock(&rdev->filelist_lock);
+	if (atomic)
+		read_lock(&rdev->filelist_lock);
+	else
+		down_read(&rdev->filelist_sem);
 	list_for_each_entry(vmidi, &rdev->filelist, list) {
 		if (!vmidi->trigger)
 			continue;

@@ -97,7 +101,10 @@ static int snd_virmidi_dev_receive_event
 				snd_rawmidi_receive(vmidi->substream, msg, len);
 		}
 	}
-	read_unlock(&rdev->filelist_lock);
+	if (atomic)
+		read_unlock(&rdev->filelist_lock);
+	else
+		up_read(&rdev->filelist_sem);
 
 	return 0;
 }

@@ -115,7 +122,7 @@ int snd_virmidi_receive(struct snd_rawmi
 	struct snd_virmidi_dev *rdev;
 
 	rdev = rmidi->private_data;
-	return snd_virmidi_dev_receive_event(rdev, ev);
+	return snd_virmidi_dev_receive_event(rdev, ev, true);
 }
 #endif  /*  0  */
 

@@ -130,7 +137,7 @@ static int snd_virmidi_event_input(struc
 	rdev = private_data;
 	if (!(rdev->flags & SNDRV_VIRMIDI_USE))
 		return 0; /* ignored */
-	return snd_virmidi_dev_receive_event(rdev, ev);
+	return snd_virmidi_dev_receive_event(rdev, ev, atomic);
 }
 
 /*

@@ -209,7 +216,6 @@ static int snd_virmidi_input_open(struct
 	struct snd_virmidi_dev *rdev = substream->rmidi->private_data;
 	struct snd_rawmidi_runtime *runtime = substream->runtime;
 	struct snd_virmidi *vmidi;
-	unsigned long flags;
 
 	vmidi = kzalloc(sizeof(*vmidi), GFP_KERNEL);
 	if (vmidi == NULL)

@@ -223,9 +229,11 @@ static int snd_virmidi_input_open(struct
 	vmidi->client = rdev->client;
 	vmidi->port = rdev->port;	
 	runtime->private_data = vmidi;
-	write_lock_irqsave(&rdev->filelist_lock, flags);
+	down_write(&rdev->filelist_sem);
+	write_lock_irq(&rdev->filelist_lock);
 	list_add_tail(&vmidi->list, &rdev->filelist);
-	write_unlock_irqrestore(&rdev->filelist_lock, flags);
+	write_unlock_irq(&rdev->filelist_lock);
+	up_write(&rdev->filelist_sem);
 	vmidi->rdev = rdev;
 	return 0;
 }

@@ -264,9 +272,11 @@ static int snd_virmidi_input_close(struc
 	struct snd_virmidi_dev *rdev = substream->rmidi->private_data;
 	struct snd_virmidi *vmidi = substream->runtime->private_data;
 
+	down_write(&rdev->filelist_sem);
 	write_lock_irq(&rdev->filelist_lock);
 	list_del(&vmidi->list);
 	write_unlock_irq(&rdev->filelist_lock);
+	up_write(&rdev->filelist_sem);
 	snd_midi_event_free(vmidi->parser);
 	substream->runtime->private_data = NULL;
 	kfree(vmidi);

@@ -520,6 +530,7 @@ int snd_virmidi_new(struct snd_card *car
 	rdev->rmidi = rmidi;
 	rdev->device = device;
 	rdev->client = -1;
+	init_rwsem(&rdev->filelist_sem);
 	rwlock_init(&rdev->filelist_lock);
 	INIT_LIST_HEAD(&rdev->filelist);
 	rdev->seq_mode = SNDRV_VIRMIDI_SEQ_DISPATCH;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 99fee508245825765ff60155fed43f970ff83a8f upstream.

caiaq driver doesn't kill the URB properly at its error path during the probe, which may lead to a use-after-free error later. This patch addresses it.

---
 sound/usb/caiaq/device.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

@@ -469,10 +469,12 @@ static int init_card(struct snd_usb_caia
 
 	err = snd_usb_caiaq_send_command(cdev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
 	if (err)
-		return err;
+		goto err_kill_urb;
 
-	if (!wait_event_timeout(cdev->ep1_wait_queue, cdev->spec_received, HZ))
-		return -ENODEV;
+	if (!wait_event_timeout(cdev->ep1_wait_queue, cdev->spec_received, HZ)) {
+		err = -ENODEV;
+		goto err_kill_urb;
+	}
 
 	usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
 		   cdev->vendor_name, CAIAQ_USB_STR_LEN);

@@ -507,6 +509,10 @@ static int init_card(struct snd_usb_caia
 
 	setup_card(cdev);
 	return 0;
+
+ err_kill_urb:
+	usb_kill_urb(&cdev->ep1_in_urb);
+	return err;
 }
 
 static int snd_probe(struct usb_interface *intf,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Gabbasov <[email protected]>

commit aec17e1e249567e82b26dafbb86de7d07fde8729 upstream.

KASAN enabled configuration reports an error

    BUG: KASAN: use-after-free in usb_composite_overwrite_options+...
                [libcomposite] at addr ...
    Read of size 1 by task ...

when some driver is un-bound and then bound again.
For example, this happens with FunctionFS driver when "ffs-test" test application is run several times in a row.

If the driver has empty manufacturer ID string in initial static data, it is then replaced with generated string. After driver unbinding the generated string is freed, but the driver data still keep that pointer. And if the driver is then bound again, that pointer is re-used for string emptiness check.

The fix is to clean up the driver string data upon its unbinding to drop the pointer to freed memory.

---
 drivers/usb/gadget/composite.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -1806,6 +1806,8 @@ static DEVICE_ATTR_RO(suspended);
 static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_gadget_strings	*gstr = cdev->driver->strings[0];
+	struct usb_string		*dev_str = gstr->strings;
 
 	/* composite_disconnect() must already have been called
 	 * by the underlying peripheral controller driver!

@@ -1825,6 +1827,9 @@ static void __composite_unbind(struct us
 
 	composite_dev_cleanup(cdev);
 
+	if (dev_str[USB_GADGET_MANUFACTURER_IDX].s == cdev->def_manufacturer)
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = "";
+
 	kfree(cdev->def_manufacturer);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <[email protected]>

commit 899f0429c7d3eed886406cd72182bee3b96aa1f9 upstream.

In the code added to function submit_page_section by commit b1058b981, sdio->bio can currently be NULL when calling dio_bio_submit. This then leads to a NULL pointer access in dio_bio_submit, so check for a NULL bio in submit_page_section before trying to submit it instead.

Fixes xfstest generic/250 on gfs2.

---
 fs/direct-io.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -812,7 +812,8 @@ out:
 	 */
 	if (sdio->boundary) {
 		ret = dio_send_cur_page(dio, sdio, map_bh);
-		dio_bio_submit(dio, sdio);
+		if (sdio->bio)
+			dio_bio_submit(dio, sdio);
 		page_cache_release(sdio->cur_page);
 		sdio->cur_page = NULL;
 	}

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vitaly Mayatskikh <[email protected]>

commit 95d78c28b5a85bacbc29b8dba7c04babb9b0d467 upstream.

bio_map_user_iov and bio_unmap_user do unbalanced pages refcounting if IO vector has small consecutive buffers belonging to the same page. bio_add_pc_page merges them into one, but the page reference is never dropped.

---
 block/bio.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -1338,6 +1338,7 @@ static struct bio *__bio_map_user_iov(st
 		offset = uaddr & ~PAGE_MASK;
 		for (j = cur_page; j < page_limit; j++) {
 			unsigned int bytes = PAGE_SIZE - offset;
+			unsigned short prev_bi_vcnt = bio->bi_vcnt;
 
 			if (len <= 0)
 				break;

@@ -1352,6 +1353,13 @@ static struct bio *__bio_map_user_iov(st
 					    bytes)
 				break;
 
+			/*
+			 * check if vector was merged with previous
+			 * drop page reference if needed
+			 */
+			if (bio->bi_vcnt == prev_bi_vcnt)
+				put_page(pages[j]);
+
 			len -= bytes;
 			offset = 0;
 		}

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Engel <[email protected]>

commit c496ad835c31ad639b6865714270b3003df031f6 upstream.

Add the USB device id for the ELV TFD500 data logger.

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

@@ -168,6 +168,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
+	{ USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Henryk Heisig <[email protected]>

commit 837ddc4793a69b256ac5e781a5e729b448a8d983 upstream.

This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -515,6 +515,7 @@ static void option_instat_callback(struc
 
 /* TP-LINK Incorporated products */
 #define TPLINK_VENDOR_ID			0x2357
+#define TPLINK_PRODUCT_LTE			0x000D
 #define TPLINK_PRODUCT_MA180			0x0201
 
 /* Changhong products */

@@ -2006,6 +2007,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shrirang Bagul <[email protected]>

commit f5d9644c5fca7d8e8972268598bb516a7eae17f9 upstream.

Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1, 0x81d2.

---
 drivers/usb/serial/qcserial.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -168,6 +168,10 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
 	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
 	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81cf)},   /* Dell Wireless 5819 */
+	{DEVICE_SWI(0x413c, 0x81d0)},   /* Dell Wireless 5819 */
+	{DEVICE_SWI(0x413c, 0x81d1)},   /* Dell Wireless 5818 */
+	{DEVICE_SWI(0x413c, 0x81d2)},   /* Dell Wireless 5818 */
 
 	/* Huawei devices */
 	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

commit 299d7572e46f98534033a9e65973f13ad1ce9047 upstream.

Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected.

---
 drivers/usb/serial/console.c |    1 +
 1 file changed, 1 insertion(+)

@@ -187,6 +187,7 @@ static int usb_console_setup(struct cons
 	tty_kref_put(tty);
  reset_open_count:
 	port->port.count = 0;
+	info->port = NULL;
 	usb_autopm_put_interface(serial->interface);
  error_get_interface:
 	usb_serial_put(serial);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 030e2c78d3a91dd0d27fef37e91950dde333eba1 upstream.

snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check.

---
 sound/core/seq/seq_clientmgr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1970,7 +1970,7 @@ static int snd_seq_ioctl_remove_events(s
 		 * No restrictions so for a user client we can clear
 		 * the whole fifo
 		 */
-		if (client->type == USER_CLIENT)
+		if (client->type == USER_CLIENT && client->data.user.fifo)
 			snd_seq_fifo_clear(client->data.user.fifo);
 	}
 

Compiled and booted on my test system. No dmesg and kselftest regressions.

thanks,
-- Shuah

Build results:

	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 112 pass: 112 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Thanks for all of the reports. They all look good except this for 3.18. Is this to be expected?

thanks,

greg k-h

TL;DR; all 3 are lab infrastructure issues, nothing related to the kernel.

Cc'd Guillaume from Collabora to have a look.

@Guillaume: 2 of the 3 boards failed to get a DHCP address from u-boot. The 3rd one failed to power cycle.

Kevin

These were lab issues indeed, I've resubmitted the 3 failing jobs and they all passed. It looks like there was a glitch in the lab network, we'll investigate and try to prevent this from occurring again.

Also it would be nice if infrastructure failures could be detected, clearly if the "power on" command returns an error or if the bootloader fails to get an IP address we know it's not because of a kernel problem. Something to discuss or add to the backlog I guess.

Guillaume

Due to some minor issues found in review, there is now a -rc2 out:

	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.76-rc2.gz

thanks,

greg k-h

Looks good. Compiled and booted - no dmesg and kselftest regressions.

thanks,
-- Shuah

Great, thanks for testing.

greg k-h

Ah, thanks for confirming that, and that this release works properly for you.

greg k-h