HAX: Do not restore mode through fbcon
Subsystems (3)
Maarten Lankhorst
maintainerPATCH 1/1 HAX: Do not restore mode through fbcon
Lets try it and see what breaks!
--- drivers/gpu/drm/drm_fb_helper.c | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-)
drivers/gpu/drm/drm_fb_helper.c +11 -19
@@ -352,7 +352,8 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activstruct drm_device *dev = fb_helper->dev;struct drm_plane *plane;struct drm_atomic_state *state; -int i, ret; +struct drm_crtc *crtc; +int ret;unsigned int plane_mask;struct drm_modeset_acquire_ctx ctx;
@@ -381,32 +382,23 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ plane->old_fb = plane->fb; plane_mask |=1 <<drm_plane_index (plane); -/* disable non-primary: */ -if (plane->type ==DRM_PLANE_TYPE_PRIMARY ) -continue ; - ret =__drm_atomic_helper_disable_plane (plane, plane_state);if (ret !=0 ) goto out_state; } -for (i =0 ; i < fb_helper->crtc_count; i++) { -struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; +drm_for_each_crtc (crtc, dev) { +struct drm_crtc_state *crtc_state =drm_atomic_get_crtc_state (state, crtc); - ret =__drm_atomic_helper_set_config (mode_set, state); -if (ret !=0 ) +if (IS_ERR (crtc_state)) { + ret =PTR_ERR (crtc_state); goto out_state; - -/* -* __drm_atomic_helper_set_config() sets active when a -* mode is set, unconditionally clear it if we force DPMS off -*/ -if (!active) { -struct drm_crtc *crtc = mode_set->crtc; -struct drm_crtc_state *crtc_state =drm_atomic_get_new_crtc_state (state, crtc); - - crtc_state->active = false; } + + crtc_state->active = false; + ret =drm_atomic_set_mode_for_crtc (crtc_state,NULL ); +if (ret) + goto out_state; } ret =drm_atomic_commit (state);
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 1/2 tests/kms_plane_lowres: Rework tests to work without fbcon.
kmstest_get_crtc was skipping because at that point the crtc was not active yet, instead we should only use igt_assert_plane_visible directly. Unexport kmstest_get_crtc, since nothing here should need it. While at it fix a small leak in igt_assert_plane_visible, the only remaining user.
--- lib/igt_kms.c | 5 ++-- lib/igt_kms.h | 1 - tests/kms_plane_lowres.c | 64 ++++++++++++++++++++---------------------------- 3 files changed, 30 insertions(+), 40 deletions(-)
lib/igt_kms.c +3 -2
@@ -1416,7 +1416,7 @@ static void parse_crtc(char *info, struct kmstest_crtc *crtc)igt_assert_eq (ret,2 ); } -void kmstest_get_crtc (int device,enum pipe pipe,struct kmstest_crtc *crtc) +static void kmstest_get_crtc (int device,enum pipe pipe,struct kmstest_crtc *crtc) {char tmp[256 ];FILE *file;
@@ -1460,7 +1460,7 @@ void kmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc)fclose (file);close (fd); -igt_skip_on (ncrtc ==0 ); +igt_assert (ncrtc ==1 ); }void igt_assert_plane_visible (int fd,enum pipe pipe,bool visibility)
@@ -1485,6 +1485,7 @@ void igt_assert_plane_visible(int fd, enum pipe pipe, bool visibility) } } +free (crtc.planes);igt_assert_eq (visible, visibility); }
lib/igt_kms.h +0 -1
@@ -221,7 +221,6 @@ uint32_t kmstest_dumb_create(int fd, int width, int height, int bpp,void *kmstest_dumb_map_buffer (int fd,uint32_t handle,uint64_t size,unsigned prot);unsigned int kmstest_get_vblank (int fd,int pipe,unsigned int flags); -void kmstest_get_crtc (int fd,enum pipe pipe,struct kmstest_crtc *crtc);void igt_assert_plane_visible (int fd,enum pipe pipe,bool visibility);/*
tests/kms_plane_lowres.c +27 -37
154 lines not on this page · raw message
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 1/1 tests/pm_backlight: Enable connected output to allow tests to succeed, v2.
In reply to Maarten LankhorstIf the connected output is disabled before this test is run, then the test will fail because actual_brightness stays at 0 instead of the value of the desired brightness. Fix this by reading intel_backlight/device for the output name, and enable that output at start of this test.
Changes since v1:
- Enable the connected output, instead of enabling all outputs.
Sample failure:
IGT-Version: 1.20-g01c550a27986 (x86_64) (Linux: 4.14.0-rc3-fbconhax+ x86_64)
(pm_backlight:1203) CRITICAL: Test assertion failure function test_and_verify, file pm_backlight.c:111:
(pm_backlight:1203) CRITICAL: Failed assertion: ({ typeof(0) _a = (0); typeof(val - tolerance) _b = (val - tolerance); _a > _b ? _a : _b; }) <= result (pm_backlight:1203) CRITICAL: error: 91200 > 0
--- tests/pm_backlight.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
tests/pm_backlight.c +34 -0
@@ -155,13 +155,44 @@ igt_main {struct context context = {0 };int old; +igt_display_t display;igt_skip_on_simulation (); igt_fixture { +enum pipe pipe; +igt_output_t *output; +bool found = false; +char full_name[32 ] = {}; +char *name; +/* Get the max value and skip the whole test if sysfs interface not available */ igt_skip_on (backlight_read (&old,"brightness" ));igt_assert (backlight_read (&context.max,"max_brightness" ) >-1 ); + +/* +* Backlight tests requires the output to be enabled, +* try to enable all. +*/ +kmstest_set_vt_graphics_mode (); +igt_display_init (&display,drm_open_driver (DRIVER_INTEL )); + +/* should be ../../cardX-$output */ +igt_assert_lt (12 ,readlink (BACKLIGHT_PATH "/device" , full_name,sizeof (full_name) -1 )); + name =basename (full_name); + +for_each_pipe_with_valid_output (&display, pipe, output) { +if (strcmp (name +6 , output->name)) +continue ; + +igt_output_set_pipe (output, pipe); + found = true; +break ; + } + +igt_assert_f (found,"Could not map \"%s\" to output (%s?)\n" , name, name +6 ); + +igt_display_commit2 (&display, display.is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); }igt_subtest ("basic-brightness" )
@@ -174,5 +205,8 @@ igt_main igt_fixture {/* Restore old brightness */ backlight_write (old,"brightness" ); + +igt_display_fini (&display); +close (display.drm_fd); } }
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 1/1 tests/kms_plane_lowres: Rework tests to work without fbcon.
kmstest_get_crtc was skipping because at that point the crtc was not active yet, instead we should only use igt_assert_plane_visible directly. Unexport kmstest_get_crtc, since nothing here should need it. While at it fix a small leak in igt_assert_plane_visible, the only remaining user.
---
Resend, messed up my git-send-email
lib/igt_kms.c | 5 ++-- lib/igt_kms.h | 1 - tests/kms_plane_lowres.c | 64 ++++++++++++++++++++---------------------------- 3 files changed, 30 insertions(+), 40 deletions(-)
lib/igt_kms.c +3 -2
@@ -1416,7 +1416,7 @@ static void parse_crtc(char *info, struct kmstest_crtc *crtc)igt_assert_eq (ret,2 ); } -void kmstest_get_crtc (int device,enum pipe pipe,struct kmstest_crtc *crtc) +static void kmstest_get_crtc (int device,enum pipe pipe,struct kmstest_crtc *crtc) {char tmp[256 ];FILE *file;
@@ -1460,7 +1460,7 @@ void kmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc)fclose (file);close (fd); -igt_skip_on (ncrtc ==0 ); +igt_assert (ncrtc ==1 ); }void igt_assert_plane_visible (int fd,enum pipe pipe,bool visibility)
@@ -1485,6 +1485,7 @@ void igt_assert_plane_visible(int fd, enum pipe pipe, bool visibility) } } +free (crtc.planes);igt_assert_eq (visible, visibility); }
lib/igt_kms.h +0 -1
@@ -221,7 +221,6 @@ uint32_t kmstest_dumb_create(int fd, int width, int height, int bpp,void *kmstest_dumb_map_buffer (int fd,uint32_t handle,uint64_t size,unsigned prot);unsigned int kmstest_get_vblank (int fd,int pipe,unsigned int flags); -void kmstest_get_crtc (int fd,enum pipe pipe,struct kmstest_crtc *crtc);void igt_assert_plane_visible (int fd,enum pipe pipe,bool visibility);/*
tests/kms_plane_lowres.c +27 -37
154 lines not on this page · raw message
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t] tests/kms_plane_lowres: Rework tests to work without fbcon.
Quoted 255 lines · Maarten Lankhorst
kmstest_get_crtcwas skipping because at that point the crtc was not active yet, instead we should only useigt_assert_plane_visibledirectly. Unexportkmstest_get_crtc, since nothing here should need it.
While at it fix a small leak inigt_assert_plane_visible, the only remaining user.Signed-off-by Maarten Lankhorst <[email protected]>---
Resend, messed up my git-send-emaillib/igt_kms.c | 5 ++--
lib/igt_kms.h | 1 -tests/kms_plane_lowres.c| 64 ++++++++++++++++++++----------------
------------3 files changed, 30 insertions(+), 40 deletions(-)lib/igt_kms.c +0
-0@@ -1416,7 +1416,7 @@ static void parse_crtc(char *info, struct kmstest_crtc *crtc) igt_assert_eq(ret, 2); }
-voidkmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc)
+static voidkmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc)
{
char tmp[256];
FILE *file;lib/igt_kms.c +0
-0@@ -1460,7 +1460,7 @@ void kmstest_get_crtc(int device, enum pipe pipe, struct kmstest_crtc *crtc) fclose(file); close(fd);lib/igt_kms.c +1
-1-igt_skip_on (ncrtc ==0 ); +igt_assert (ncrtc ==1 );}
voidigt_assert_plane_visible(int fd, enum pipe pipe, bool visibility)lib/igt_kms.c +0
-0@@ -1485,6 +1485,7 @@ void igt_assert_plane_visible(int fd, enum pipe pipe, bool visibility) } }lib/igt_kms.c +1
-0+free (crtc.planes);
igt_assert_eq(visible, visibility);
}lib/igt_kms.h +0
-0@@ -221,7 +221,6 @@ uint32_t kmstest_dumb_create(int fd, int width, int height, int bpp,void *kmstest_dumb_map_buffer(int fd,
uint32_thandle,uint64_tsize,
unsigned prot);
unsigned intkmstest_get_vblank(int fd, int pipe, unsigned int flags);
-voidkmstest_get_crtc(int fd, enum pipe pipe, struct kmstest_crtc *crtc);
voidigt_assert_plane_visible(int fd, enum pipe pipe, bool visibility);
/*tests/kms_plane_lowres.c +0
-1@@ -40,7 +40,6 @@ typedef struct { int drm_fd; igt_display_t display; igt_pipe_crc_t *pipe_crc; -igt_plane_t **plane; struct igt_fb *fb; } data_t;tests/kms_plane_lowres.c +0
-3@@ -113,30 +112,27 @@ static void test_init(data_t *data, enum pipe pipe) { data->pipe_crc = igt_pipe_crc_new(data->drm_fd, pipe,INTEL_PIPE_CRC_SOURCE_AUTO ); - data->plane =calloc (data->display.pipes[pipe].n_planes, sizeof(data->plane));\ -igt_assert_f (data->plane,"Failed to allocate memory for %d planes\n", - data->display.pipes[pipe].n_planes); data->fb = calloc(data->display.pipes[pipe].n_planes,sizeof (struct igt_fb ));igt_assert_f(data->fb, "Failed to allocate memory for %d FBs\n",
data->display.pipes[pipe].n_planes); }
static voidtests/kms_plane_lowres.c +1
-1-test_fini (data_t *data, igt_output_t *output) +test_fini(data_t *data, igt_output_t *output, enum pipe pipe){
tests/kms_plane_lowres.c +2
-0+igt_plane_t *plane; +/* restore original mode */
igt_output_override_mode(output, NULL);tests/kms_plane_lowres.c +2
-2-for (int i =0 ; i <2 ; i++) -igt_plane_set_fb (data->plane[i],NULL ); +for_each_plane_on_pipe (&data->display, pipe, plane) +igt_plane_set_fb (plane,NULL );
/* reset the constraint on the pipe */
igt_output_set_pipe(output, PIPE_ANY);
igt_pipe_crc_free(data->pipe_crc);tests/kms_plane_lowres.c +0
-2-free (data->plane); - data->plane =NULL ;
free(data->fb);
data->fb= NULL;
}tests/kms_plane_lowres.c +0
-0@@ -184,19 +180,13 @@ static drmModeModeInfo *test_setup(data_t *data, enum pipe pipe,
uint64_tmodifier, int flags,
igt_output_t *output)
{tests/kms_plane_lowres.c +0
-1-struct kmstest_crtc crtc;drmModeModeInfo *mode;
int size;
int i, x, y;tests/kms_plane_lowres.c +1
-0+igt_plane_t *plane;
igt_output_set_pipe(output, pipe);tests/kms_plane_lowres.c +0
-2-kmstest_get_crtc (data->drm_fd, pipe, &crtc); - igt_skip_on(crtc.n_planes > data-Quoted 1 line
display.pipes[pipe].n_planes);
tests/kms_plane_lowres.c +0
-4-igt_skip_on (crtc.n_planes ==0 ); - -for (i =0 ; i < crtc.n_planes; i++) - data->plane[i] = igt_output_get_plane(output,crtc.planes[i].index);
mode =igt_output_get_mode(output);tests/kms_plane_lowres.c +0
-0@@ -206,13 +196,14 @@ test_setup(data_t *data, enum pipe pipe, uint64_t modifier, int flags, 0.0, 0.0, 1.0, &data->fb[0]);tests/kms_plane_lowres.c +0
-2-igt_plane_set_fb (data->plane[0 ], &data->fb[0 ]); -/* yellow sprite plane in lower left corner */
tests/kms_plane_lowres.c +3
-2-for (i =0 ; i < crtc.n_planes; i++) { -if (data->plane[i]->type ==DRM_PLANE_TYPE_PRIMARY ) +for_each_plane_on_pipe (&data->display, pipe, plane) { +if (plane->type ==DRM_PLANE_TYPE_PRIMARY ) { +igt_plane_set_fb (plane, &data->fb[0 ]);continue;
tests/kms_plane_lowres.c +3
-1-if (data->plane[i]->type ==DRM_PLANE_TYPE_CURSOR ) + } + +if (plane->type ==DRM_PLANE_TYPE_CURSOR )size = 64;
else
size = SIZE;tests/kms_plane_lowres.c +0
-0@@ -222,13 +213,13 @@ test_setup(data_t *data, enum pipe pipe, uint64_t modifier, int flags,
igt_create_color_fb(data->drm_fd,
size, size,tests/kms_plane_lowres.c +0
-1- data->plane[i]->type ==
DRM_PLANE_TYPE_CURSOR?DRM_FORMAT_ARGB8888:DRM_FORMAT_XRGB8888,tests/kms_plane_lowres.c +0
-1- data->plane[i]->type ==
DRM_PLANE_TYPE_CURSOR?LOCAL_DRM_FORMAT_MOD_NONE: modifier,tests/kms_plane_lowres.c +1
-0+ plane->type ==
DRM_PLANE_TYPE_CURSOR?DRM_FORMAT_ARGB8888:DRM_FORMAT_XRGB8888,tests/kms_plane_lowres.c +1
-0+ plane->type ==
DRM_PLANE_TYPE_CURSOR?LOCAL_DRM_FORMAT_MOD_NONE: modifier, 1.0, 1.0, 0.0, &data->fb[i]);tests/kms_plane_lowres.c +2
-2-igt_plane_set_position (data->plane[i], x, y); -igt_plane_set_fb (data->plane[i], &data->fb[i]); +igt_plane_set_position (plane, x, y); +igt_plane_set_fb (plane, &data->fb[i]);}
return mode;tests/kms_plane_lowres.c +0
-0@@ -289,35 +280,32 @@ test_plane_position_with_output(data_t *data, enum pipe pipe,
igt_pipe_crc_stop(data->pipe_crc);tests/kms_plane_lowres.c +1
-1-test_fini (data, output); +test_fini (data, output, pipe);}
static void
test_plane_position(data_t *data, enum pipe pipe,uint64_tmodifier) {
igt_output_t*output;tests/kms_plane_lowres.c +0
-1-int connected_outs;const int gen = intel_gen(intel_get_drm_devid(data-
Quoted 1 line
drm_fd));tests/kms_plane_lowres.c +0
-3-igt_require (data->display.is_atomic); -igt_skip_on (pipe >= data->display.n_pipes); -if (modifier ==
LOCAL_I915_FORMAT_MOD_Y_TILED|| modifier ==LOCAL_I915_FORMAT_MOD_Yf_TILED)igt_skip_on(gen < 9);tests/kms_plane_lowres.c +0
-2- connected_outs =0 ; -for_each_valid_output_on_pipe (&data->display, pipe, output){
tests/kms_plane_lowres.c +1
-0+for_each_valid_output_on_pipe (&data->display, pipe, output)
test_plane_position_with_output(data, pipe, output, modifier);tests/kms_plane_lowres.c +0
-4- connected_outs++; - } - -igt_skip_on (connected_outs ==0 );}
static void
run_tests_for_pipe(data_t *data, enum pipe pipe)
{tests/kms_plane_lowres.c +4
-0+ igt_fixture { +igt_skip_on (pipe >= data->display.n_pipes); + + igt_display_require_output_on_pipe(&data->display,pipe);
tests/kms_plane_lowres.c +2
-0+ } +igt_subtest_f("pipe-%s-tiling-none",
kmstest_pipe_name(pipe))
test_plane_position(data, pipe,LOCAL_DRM_FORMAT_MOD_NONE);tests/kms_plane_lowres.c +0
-0@@ -350,10 +338,12 @@ igt_main
igt_require_pipe_crc(data.drm_fd);igt_display_init(&data.display, data.drm_fd);tests/kms_plane_lowres.c +1
-0+igt_require (data.display.is_atomic);}
for_each_pipe_static(pipe)tests/kms_plane_lowres.c +2
-1-run_tests_for_pipe (&data, pipe); +igt_subtest_group + run_tests_for_pipe(&data, pipe);
igt_fixture{
igt_display_fini(&data.display);
Signature · 6 lines
Mika Kahola - Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH i-g-t] tests/kms_plane_lowres: Rework tests to work without fbcon.
Op 23-10-17 om 12:05 schreef Mika Kahola:
Quoted 13 lines
Reviewed-by Mika Kahola <[email protected]>Quoted 10 lines · Maarten Lankhorst
kmstest_get_crtcwas skipping because at that point the crtc was not active yet, instead we should only useigt_assert_plane_visibledirectly. Unexportkmstest_get_crtc, since nothing here should need it.
While at it fix a small leak inigt_assert_plane_visible, the only remaining user.Signed-off-by Maarten Lankhorst <[email protected]>---
Resend, messed up my git-send-email
Thanks, pushed v3 which had some more fixes to make the test pass. :)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 2/2 tests/drm_read: Change tests to not require fbcon
In reply to Maarten LankhorstThe first active pipe might not be pipe A, and we shouldn't rely on fbcon for a working crtc. Use igt_kms to set up something basic, and use the kmstest helper to get an event from the correct pipe.
--- tests/drm_read.c | 62 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 34 insertions(+), 28 deletions(-)
tests/drm_read.c +34 -28
@@ -57,18 +57,9 @@ static void assert_empty(int fd)do_or_die (poll (&pfd,1 ,0 )); } -static void generate_event (int fd) +static void generate_event (int fd,enum pipe pipe) { -union drm_wait_vblank vbl; - -/* We require that pipe 0 is running */ - - vbl.request.type = -DRM_VBLANK_RELATIVE | -DRM_VBLANK_EVENT ; - vbl.request.sequence =0 ; - -do_ioctl (fd,DRM_IOCTL_WAIT_VBLANK , &vbl); +igt_assert (kmstest_get_vblank (fd, pipe,DRM_VBLANK_EVENT )); }static void wait_for_event (int fd)
@@ -120,7 +111,7 @@ static void test_invalid_buffer(int in)teardown (fd); } -static void test_fault_buffer (int in) +static void test_fault_buffer (int in,enum pipe pipe) {int fd =setup (in,0 );struct drm_mode_map_dumb arg;
@@ -134,7 +125,7 @@ static void test_fault_buffer(int in) buf =mmap (0 ,4096 ,PROT_WRITE ,MAP_SHARED , fd, arg.offset);igt_assert (buf !=MAP_FAILED ); -generate_event (fd); +generate_event (fd, pipe);alarm (1 );
@@ -156,13 +147,13 @@ static void test_empty(int in, int nonblock, int expected)teardown (fd); } -static void test_short_buffer (int in,int nonblock) +static void test_short_buffer (int in,int nonblock,enum pipe pipe) {char buffer[1024 ];/* events are typically 32 bytes */ int fd =setup (in, nonblock); -generate_event (fd); -generate_event (fd); +generate_event (fd, pipe); +generate_event (fd, pipe);wait_for_event (fd);
@@ -175,31 +166,46 @@ static void test_short_buffer(int in, int nonblock)teardown (fd); } -static bool crtc0_active (int fd) -{ -union drm_wait_vblank vbl = {}; - - vbl.request.type =DRM_VBLANK_RELATIVE ; -return drmIoctl (fd,DRM_IOCTL_WAIT_VBLANK , &vbl) ==0 ; -} - igt_main {int fd; +igt_display_t display; +struct igt_fb fb; +enum pipe pipe;signal (SIGALRM , sighandler);siginterrupt (SIGALRM ,1 ); igt_fixture { +igt_output_t *output; + fd =drm_open_driver_master (DRIVER_ANY ); -igt_require (crtc0_active (fd)); +kmstest_set_vt_graphics_mode (); + +igt_display_init (&display, fd); +igt_display_require_output (&display); + +for_each_pipe_with_valid_output (&display, pipe, output) { +drmModeModeInfo *mode =igt_output_get_mode (output); + +igt_create_pattern_fb (fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 , +LOCAL_DRM_FORMAT_MOD_NONE , &fb); + +igt_output_set_pipe (output, pipe); +igt_plane_set_fb (igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ), &fb); +break ; + } + +igt_display_commit2 (&display, display.is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); +igt_require (kmstest_get_vblank (fd, pipe,0 )); } igt_subtest("invalid-buffer")test_invalid_buffer (fd); igt_subtest("fault-buffer") -test_fault_buffer (fd); +test_fault_buffer (fd, pipe); igt_subtest("empty-block")test_empty (fd,0 ,EINTR );
@@ -208,8 +214,8 @@ igt_maintest_empty (fd,1 ,EAGAIN ); igt_subtest("short-buffer-block") -test_short_buffer (fd,0 ); +test_short_buffer (fd,0 , pipe); igt_subtest("short-buffer-nonblock") -test_short_buffer (fd,1 ); +test_short_buffer (fd,1 , pipe); }
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t 2/2] tests/drm_read: Change tests to not require fbcon
Quoting Maarten Lankhorst (2017-10-13 15:10:49)
Quoted 5 lines
The first active pipe might not be pipe A, and we shouldn't rely on fbcon for a working crtc. Use
igt_kmsto set up something basic, and use the kmstest helper to get an event from the correct pipe.Signed-off-by Maarten Lankhorst <[email protected]>
If one is lazy enough, some one will be foolhardy enough to try turning off all outputs and fixup the fallout. Not the most catchy of sayings, but true in this case.
Quoted 17 lines
--- tests/drm_read.c | 62 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 34 insertions(+), 28 deletions(-)tests/drm_read.c +1
-3@@ -57,18 +57,9 @@ static void assert_empty(int fd)do_or_die (poll (&pfd,1 ,0 )); } -static void generate_event (int fd) +static void generate_event (int fd,enum pipe pipe) { -union drm_wait_vblank vbl; -
tests/drm_read.c static void assert_empty(int fd) · line 63
Quoted 10 lines
tests/drm_read.c +1
-8-/* We require that pipe 0 is running */ - - vbl.request.type = -DRM_VBLANK_RELATIVE | -DRM_VBLANK_EVENT ; - vbl.request.sequence =0 ; - -do_ioctl (fd,DRM_IOCTL_WAIT_VBLANK , &vbl); +igt_assert (kmstest_get_vblank (fd, pipe,DRM_VBLANK_EVENT )); }
Now this is pipe-aware, is there any variation between pipes? Any advantage in extending the test? Well that should already be kms_vblank.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH i-g-t 2/2] tests/drm_read: Change tests to not require fbcon
Op 13-10-17 om 16:22 schreef Chris Wilson:
Quoted 40 lines
Quoting Maarten Lankhorst (2017-10-13 15:10:49)
Quoted 5 lines
The first active pipe might not be pipe A, and we shouldn't rely on fbcon for a working crtc. Use
igt_kmsto set up something basic, and use the kmstest helper to get an event from the correct pipe.Signed-off-by Maarten Lankhorst <[email protected]>If one is lazy enough, some one will be foolhardy enough to try turning off all outputs and fixup the fallout. Not the most catchy of sayings, but true in this case.
Quoted 17 lines
--- tests/drm_read.c | 62 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 34 insertions(+), 28 deletions(-)tests/drm_read.c +1
-3@@ -57,18 +57,9 @@ static void assert_empty(int fd)do_or_die (poll (&pfd,1 ,0 )); } -static void generate_event (int fd) +static void generate_event (int fd,enum pipe pipe) { -union drm_wait_vblank vbl; -tests/drm_read.c static void assert_empty(int fd) · line 63
Quoted 10 lines
tests/drm_read.c +1
-8-/* We require that pipe 0 is running */ - - vbl.request.type = -DRM_VBLANK_RELATIVE | -DRM_VBLANK_EVENT ; - vbl.request.sequence =0 ; - -do_ioctl (fd,DRM_IOCTL_WAIT_VBLANK , &vbl); +igt_assert (kmstest_get_vblank (fd, pipe,DRM_VBLANK_EVENT )); }Now this is pipe-aware, is there any variation between pipes? Any advantage in extending the test? Well that should already be
kms_vblank.
Quoted 2 lines
Reviewed-by Chris Wilson <[email protected]>-Chris
Thanks, pushed. Will resubmit kms_plane_lowres, can't get it right..
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Series 31893v2 HAX: Do not restore mode through fbcon
https://patchwork.freedesktop.org/api/1.0/series/31893/revisions/2/mbox/
Test chamelium:
Subgroup dp-crc-fast:
fail -> PASS (fi-kbl-7500u) fdo#102514
Subgroup hdmi-crc-fast:
pass -> DMESG-WARN (fi-skl-6700k) fdo#103019
Subgroup common-hpd-after-suspend:
dmesg-warn -> PASS (fi-kbl-7500u) fdo#102505
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-ilk-650)
pass -> DMESG-WARN (fi-skl-6770hq)
pass -> DMESG-WARN (fi-cfl-s)
Test gem_exec_nop:
Subgroup basic-parallel:
pass -> INCOMPLETE (fi-bxt-j4205)
Test gem_exec_suspend:
Subgroup basic-s3:
dmesg-warn -> PASS (fi-cfl-s) fdo#103186
Subgroup basic-s4-devices:
pass -> DMESG-WARN (fi-byt-j1900)
Test gem_ringfill:
Subgroup basic-default-hang:
dmesg-warn -> PASS (fi-blb-e6850) fdo#101600 +1
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-WARN (fi-byt-n2820)
Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (fi-byt-j1900) fdo#101705
Test drv_module_reload:
Subgroup basic-reload:
dmesg-warn -> PASS (fi-gdg-551) fdo#102707fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#103019 https://bugs.freedesktop.org/show_bug.cgi?id=103019
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fdo#103186 https://bugs.freedesktop.org/show_bug.cgi?id=103186
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:455s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:456s fi-blb-e6850 total:289 pass:224 dwarn:0 dfail:0 fail:0 skip:65 time:369s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:585s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:272s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:535s fi-bxt-j4205 total:76 pass:59 dwarn:0 dfail:0 fail:0 skip:16 fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:547s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:516s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:567s fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:427s fi-gdg-551 total:289 pass:179 dwarn:0 dfail:0 fail:1 skip:109 time:259s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:613s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:437s fi-ilk-650 total:289 pass:227 dwarn:1 dfail:0 fail:0 skip:61 time:445s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:468s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:474s fi-kbl-7500u total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:491s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:495s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:567s fi-pnv-d510 total:289 pass:223 dwarn:0 dfail:0 fail:0 skip:66 time:642s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:486s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:622s fi-skl-6700k total:289 pass:264 dwarn:1 dfail:0 fail:0 skip:24 time:531s fi-skl-6770hq total:289 pass:268 dwarn:1 dfail:0 fail:0 skip:20 time:508s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:469s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:542s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:417s
005c15a2795854ab64b6ce63dcb099d2eea4a889 drm-tip: 2017y-10m-13d-15h-39m-54s UTC integration manifest c3dfbdd36db2 HAX: Do not restore mode through fbcon
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6025/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for tests/pm_backlight: Enable connected output to allow tests to succeed, v2. (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: tests/pm_backlight: Enable connected output to allow tests to succeed, v2. (rev2)
URL : https://patchwork.freedesktop.org/series/31924/
State : warning
== Summary ==
IGT patchset tested on top of latest successful build 58616272b23efce1e62a3ee0d37e13de6ffc012f igt/gem_eio: Check hang/eio recovery during suspend
with latest DRM-Tip kernel build CI_DRM_32355a6dc55bd5e6 drm-tip: 2017y-10m-13d-18h-14m-47s UTC integration manifest
No testlist changes.
Test chamelium:
Subgroup dp-crc-fast:
pass -> FAIL (fi-kbl-7500u) fdo#102514
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-kbl-7500u)fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:462s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:472s fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:397s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:580s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:289s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:530s fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:523s fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:551s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:529s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:568s fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:442s fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:273s fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:607s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:443s fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:469s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:508s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:476s fi-kbl-7500u total:289 pass:262 dwarn:2 dfail:0 fail:1 skip:24 time:501s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:491s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:595s fi-pnv-d510 total:289 pass:222 dwarn:1 dfail:0 fail:0 skip:66 time:654s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:476s fi-skl-6700hq total:289 pass:263 dwarn:0 dfail:0 fail:0 skip:26 time:668s fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:538s fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:517s fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:476s fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:590s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:433s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_354/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Series 31893v2 HAX: Do not restore mode through fbcon
https://patchwork.freedesktop.org/api/1.0/series/31893/revisions/2/mbox/
Test chamelium:
Subgroup hdmi-crc-fast:
pass -> INCOMPLETE (fi-skl-6700k) fdo#103019
Subgroup common-hpd-after-suspend:
dmesg-warn -> PASS (fi-kbl-7500u) fdo#102505
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-ilk-650)
pass -> DMESG-WARN (fi-skl-6770hq)
pass -> DMESG-WARN (fi-cfl-s)
Test gem_ctx_exec:
Subgroup basic:
pass -> INCOMPLETE (fi-skl-gvtdvm)
Test gem_exec_basic:
Subgroup readonly-blt:
pass -> INCOMPLETE (fi-skl-6700hq)
Test gem_exec_nop:
Subgroup basic-parallel:
pass -> INCOMPLETE (fi-bxt-j4205)
pass -> INCOMPLETE (fi-glk-1)
Test gem_exec_reloc:
Subgroup basic-write-read-noreloc:
pass -> INCOMPLETE (fi-skl-6770hq)
Test gem_exec_suspend:
Subgroup basic-s3:
dmesg-warn -> PASS (fi-cfl-s) fdo#103186
Subgroup basic-s4-devices:
pass -> DMESG-WARN (fi-byt-j1900)
Test gem_ringfill:
Subgroup basic-default-hang:
dmesg-warn -> PASS (fi-blb-e6850) fdo#101600 +1
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-WARN (fi-byt-n2820)
Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (fi-byt-j1900) fdo#101705 +1
Test prime_vgem:
Subgroup basic-fence-flip:
dmesg-warn -> PASS (fi-kbl-7567u) fdo#103165 +1fdo#103019 https://bugs.freedesktop.org/show_bug.cgi?id=103019
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fdo#103186 https://bugs.freedesktop.org/show_bug.cgi?id=103186
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fdo#103165 https://bugs.freedesktop.org/show_bug.cgi?id=103165
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:444s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:436s fi-blb-e6850 total:289 pass:224 dwarn:0 dfail:0 fail:0 skip:65 time:367s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:558s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:249s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:515s fi-bxt-j4205 total:76 pass:59 dwarn:0 dfail:0 fail:0 skip:16 fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:506s fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:486s fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:551s fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:406s fi-glk-1 total:76 pass:58 dwarn:0 dfail:0 fail:0 skip:17 fi-hsw-4770 total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:444s fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:425s fi-ilk-650 total:289 pass:227 dwarn:1 dfail:0 fail:0 skip:61 time:429s fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:462s fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:456s fi-kbl-7500u total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:478s fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:533s fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:498s fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:547s fi-pnv-d510 total:289 pass:223 dwarn:0 dfail:0 fail:0 skip:66 time:528s fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:460s fi-skl-6700hq total:47 pass:33 dwarn:0 dfail:0 fail:0 skip:13 fi-skl-6700k total:6 pass:2 dwarn:0 dfail:0 fail:0 skip:3 fi-skl-6770hq total:98 pass:84 dwarn:1 dfail:0 fail:0 skip:12 fi-skl-gvtdvm total:28 pass:18 dwarn:0 dfail:0 fail:0 skip:9 fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:528s fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:408s
fi-gdg-551 failed to connect after reboot
75b85b0dce2faee585046d3ce19d76bcb163c3e7 drm-tip: 2017y-10m-20d-10h-07m-16s UTC integration manifest 6996613f0e2d HAX: Do not restore mode through fbcon
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6122/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Series 31893v2 HAX: Do not restore mode through fbcon
https://patchwork.freedesktop.org/api/1.0/series/31893/revisions/2/mbox/
Test chamelium:
Subgroup hdmi-edid-read:
skip -> INCOMPLETE (fi-skl-6700hq)
Subgroup hdmi-crc-fast:
pass -> INCOMPLETE (fi-skl-6700k) fdo#103019
Subgroup common-hpd-after-suspend:
dmesg-warn -> PASS (fi-kbl-7500u) fdo#102505
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-ilk-650)
pass -> DMESG-WARN (fi-skl-6770hq)
pass -> DMESG-WARN (fi-cfl-s)
Test drv_getparams_basic:
Subgroup basic-eu-total:
pass -> INCOMPLETE (fi-kbl-7567u)
Test gem_exec_basic:
Subgroup gtt-bsd2:
pass -> INCOMPLETE (fi-skl-6260u)
Subgroup readonly-bsd:
pass -> INCOMPLETE (fi-cfl-s)
Test gem_exec_gttfill:
Subgroup basic:
pass -> INCOMPLETE (fi-bxt-j4205)
Test gem_exec_suspend:
Subgroup basic-s4-devices:
pass -> DMESG-WARN (fi-byt-j1900)
pass -> DMESG-WARN (fi-byt-n2820)
Test gem_ringfill:
Subgroup basic-default-hang:
dmesg-warn -> PASS (fi-blb-e6850) fdo#101600 +1
Test kms_addfb_basic:
Subgroup bad-pitch-1024:
pass -> INCOMPLETE (fi-skl-6770hq)
Test kms_busy:
Subgroup basic-flip-a:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-b:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-c:
pass -> SKIP (fi-hsw-4770r)
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-busy-flip-before-cursor-legacy:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-after-cursor-atomic:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-after-cursor-legacy:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-after-cursor-varying-size:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-before-cursor-atomic:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-before-cursor-legacy:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-before-cursor-varying-size:
pass -> SKIP (fi-hsw-4770r)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-vs-modeset:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-flip-vs-wf_vblank:
pass -> SKIP (fi-hsw-4770r)
Subgroup basic-plain-flip:
pass -> SKIP (fi-hsw-4770r)
Test kms_frontbuffer_tracking:
Subgroup basic:
pass -> SKIP (fi-hsw-4770r)
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-a:
pass -> SKIP (fi-hsw-4770r)
Subgroup hang-read-crc-pipe-b:
pass -> SKIP (fi-hsw-4770r)
Subgroup hang-read-crc-pipe-c:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-a:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-a-frame-sequence:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-b:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-b-frame-sequence:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-c:
pass -> SKIP (fi-hsw-4770r)
Subgroup nonblocking-crc-pipe-c-frame-sequence:
pass -> SKIP (fi-hsw-4770r)
Subgroup read-crc-pipe-a:
pass -> SKIP (fi-hsw-4770r)
Subgroup read-crc-pipe-a-frame-sequence:
pass -> SKIP (fi-hsw-4770r)
Subgroup read-crc-pipe-b:
pass -> SKIP (fi-hsw-4770r)
Subgroup read-crc-pipe-b-frame-sequence:
pass -> SKIP (fi-hsw-4770r) fdo#102332
Subgroup read-crc-pipe-c:WARNING: Long output truncated
75b85b0dce2faee585046d3ce19d76bcb163c3e7 drm-tip: 2017y-10m-20d-10h-07m-16s UTC integration manifest 57c716927064 HAX: Do not restore mode through fbcon
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6124/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Test kms_plane_lowres:
Subgroup pipe-A-tiling-none:
pass -> SKIP (shard-hsw)
Subgroup pipe-A-tiling-x:
pass -> SKIP (shard-hsw)
Test kms_atomic:
Subgroup test_only:
pass -> SKIP (shard-hsw)
Subgroup plane_cursor_legacy:
pass -> SKIP (shard-hsw)
Subgroup plane_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup crtc_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup plane_invalid_params_fence:
pass -> SKIP (shard-hsw)
Subgroup atomic_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup plane_overlay_legacy:
pass -> SKIP (shard-hsw)
Test kms_busy:
Subgroup extended-modeset-hang-newfb-with-reset-render-C:
pass -> DMESG-WARN (shard-hsw) fdo#102249 +1
Subgroup extended-modeset-hang-newfb-with-reset-render-B:
dmesg-warn -> PASS (shard-hsw) fdo#103038
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-spr-indfb-fullscreen:
pass -> FAIL (shard-hsw)
Subgroup fbc-1p-primscrn-cur-indfb-move:
skip -> PASS (shard-hsw)
Subgroup fbc-1p-offscren-pri-indfb-draw-mmap-cpu:
skip -> PASS (shard-hsw)
Test kms_sysfs_edid_timing:
pass -> FAIL (shard-hsw) fdo#100047
Test kms_flip:
Subgroup blt-wf_vblank-vs-dpms:
dmesg-warn -> PASS (shard-hsw)
Test kms_plane:
Subgroup plane-panning-bottom-right-suspend-pipe-C-planes:
pass -> INCOMPLETE (shard-hsw)
Subgroup plane-position-hole-pipe-A-planes:
skip -> PASS (shard-hsw)
Test gem_mmap_wc:
Subgroup set-cache-level:
pass -> SKIP (shard-hsw)
Test drv_module_reload:
Subgroup basic-reload:
pass -> DMESG-WARN (shard-hsw) fdo#102707
Test gem_userptr_blits:
Subgroup map-fixed-invalidate-overlap-gup:
pass -> INCOMPLETE (shard-hsw)fdo#102249 https://bugs.freedesktop.org/show_bug.cgi?id=102249
fdo#103038 https://bugs.freedesktop.org/show_bug.cgi?id=103038
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
shard-hsw total:2421 pass:1356 dwarn:3 dfail:0 fail:10 skip:1050 time:8952s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6122/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Test kms_busy:
Subgroup extended-modeset-hang-newfb-with-reset-render-C:
pass -> DMESG-WARN (shard-hsw) fdo#102249 +1
Subgroup extended-modeset-hang-newfb-with-reset-render-B:
dmesg-warn -> PASS (shard-hsw) fdo#103038
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-spr-indfb-fullscreen:
pass -> FAIL (shard-hsw)
Subgroup fbc-1p-primscrn-cur-indfb-move:
skip -> PASS (shard-hsw)
Subgroup fbc-1p-offscren-pri-indfb-draw-mmap-cpu:
skip -> PASS (shard-hsw)
Test kms_sysfs_edid_timing:
pass -> FAIL (shard-hsw) fdo#100047
Test kms_plane:
Subgroup plane-panning-bottom-right-suspend-pipe-C-planes:
pass -> INCOMPLETE (shard-hsw)
Subgroup plane-position-hole-pipe-A-planes:
skip -> PASS (shard-hsw)
Test kms_atomic:
Subgroup atomic_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup plane_overlay_legacy:
pass -> SKIP (shard-hsw)
Subgroup crtc_invalid_params_fence:
pass -> SKIP (shard-hsw)
Subgroup plane_cursor_legacy:
pass -> SKIP (shard-hsw)
Subgroup plane_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup crtc_invalid_params:
pass -> SKIP (shard-hsw)
Subgroup plane_invalid_params_fence:
pass -> SKIP (shard-hsw)
Subgroup test_only:
pass -> SKIP (shard-hsw)
Test kms_plane_lowres:
Subgroup pipe-A-tiling-none:
pass -> SKIP (shard-hsw)
Subgroup pipe-A-tiling-x:
pass -> SKIP (shard-hsw)
Test gem_userptr_blits:
Subgroup map-fixed-invalidate-overlap-gup:
pass -> DMESG-WARN (shard-hsw)
Test gem_mmap_wc:
Subgroup set-cache-level:
pass -> SKIP (shard-hsw)
Test kms_flip:
Subgroup blt-wf_vblank-vs-dpms:
dmesg-warn -> PASS (shard-hsw) fdo#102614fdo#102249 https://bugs.freedesktop.org/show_bug.cgi?id=102249
fdo#103038 https://bugs.freedesktop.org/show_bug.cgi?id=103038
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
shard-hsw total:2469 pass:1381 dwarn:3 dfail:0 fail:10 skip:1074 time:9104s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6124/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Series 31893v2 HAX: Do not restore mode through fbcon
https://patchwork.freedesktop.org/api/1.0/series/31893/revisions/2/mbox/
Test chamelium:
Subgroup dp-crc-fast:
fail -> PASS (fi-kbl-7500u) fdo#102514
Subgroup hdmi-crc-fast:
pass -> INCOMPLETE (fi-skl-6700k) fdo#103019
Subgroup common-hpd-after-suspend:
dmesg-warn -> PASS (fi-kbl-7500u) fdo#102505
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-ilk-650)
Test gem_exec_nop:
Subgroup basic-parallel:
pass -> INCOMPLETE (fi-bxt-j4205)
Test gem_exec_parse:
Subgroup basic-allowed:
skip -> INCOMPLETE (fi-skl-gvtdvm)
Test gem_exec_store:
Subgroup basic-bsd:
pass -> INCOMPLETE (fi-cfl-s)
Subgroup basic-render:
pass -> INCOMPLETE (fi-kbl-7567u)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> DMESG-FAIL (fi-kbl-7560u) fdo#103039
Subgroup basic-s4-devices:
pass -> DMESG-WARN (fi-byt-n2820)
pass -> DMESG-FAIL (fi-kbl-7560u) fdo#102846 +1
Test gem_flink_basic:
Subgroup bad-flink:
pass -> DMESG-WARN (fi-kbl-7560u) fdo#103049 +4
Test gem_mmap:
Subgroup basic:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-bo:
pass -> DMESG-WARN (fi-kbl-7560u)
Test gem_mmap_gtt:
Subgroup basic:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-copy:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-read:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-read-no-prefault:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-read-write:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-read-write-distinct:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-short:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-bo:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-bo-tiledx:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-bo-tiledy:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-copy:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-small-copy-xy:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-wc:
pass -> DMESG-WARN (fi-kbl-7560u)
Subgroup basic-write:
pass -> INCOMPLETE (fi-kbl-7560u)
Test gem_ringfill:
Subgroup basic-default-hang:
dmesg-warn -> PASS (fi-blb-e6850) fdo#101600 +1
Test kms_addfb_basic:
Subgroup addfb25-x-tiled:
pass -> INCOMPLETE (fi-skl-6770hq)
Subgroup invalid-set-prop:
pass -> INCOMPLETE (fi-skl-6260u)
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (fi-byt-n2820) fdo#101705
Test drv_module_reload:
Subgroup basic-reload:
dmesg-warn -> PASS (fi-gdg-551) fdo#102707fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#103019 https://bugs.freedesktop.org/show_bug.cgi?id=103019
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fdo#103039 https://bugs.freedesktop.org/show_bug.cgi?id=103039
fdo#102846 https://bugs.freedesktop.org/show_bug.cgi?id=102846
fdo#103049 https://bugs.freedesktop.org/show_bug.cgi?id=103049
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:438s fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:438s fi-blb-e6850 total:289 pass:224 dwarn:0 dfail:0 fail:0 skip:65 time:363s fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:547s fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:248s fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:515s fi-bxt-j4205 total:76 pass:59 dwarn:0 dfail:0 fail:0 skip:16 fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:508s
WARNING: Long output truncated
fcd4cd0d6182714b9ab0b5bb9139a06e6378b8ce drm-tip: 2017y-10m-20d-23h-22m-54s UTC integration manifest d5527e25b92a HAX: Do not restore mode through fbcon
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6134/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for HAX: Do not restore mode through fbcon (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: HAX: Do not restore mode through fbcon (rev2)
URL : https://patchwork.freedesktop.org/series/31893/
State : failure
== Summary ==
Test gem_mmap_wc:
Subgroup set-cache-level:
pass -> SKIP (shard-hsw)
Test kms_sysfs_edid_timing:
pass -> FAIL (shard-hsw) fdo#100047
Test kms_chv_cursor_fail:
Subgroup pipe-B-256x256-left-edge:
pass -> INCOMPLETE (shard-hsw)
Test kms_plane_multiple:
Subgroup atomic-pipe-C-tiling-none:
pass -> INCOMPLETE (shard-hsw)
Test gem_userptr_blits:
Subgroup map-fixed-invalidate-overlap-gup:
pass -> DMESG-WARN (shard-hsw)
Subgroup map-fixed-invalidate-gup:
pass -> INCOMPLETE (shard-hsw)
Test kms_setmode:
Subgroup basic:
fail -> PASS (shard-hsw) fdo#99912
Test kms_plane_lowres:
Subgroup pipe-A-tiling-x:
pass -> SKIP (shard-hsw)
Subgroup pipe-A-tiling-none:
pass -> SKIP (shard-hsw)
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-spr-indfb-fullscreen:
pass -> FAIL (shard-hsw)fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
shard-hsw total:2361 pass:1309 dwarn:3 dfail:0 fail:10 skip:1036 time:8344s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6134/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx