Skip to contentSkip to conversation

arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig

PATCH New Ran Wang 2 participants 6 messages Oct 23, 2017 – Oct 30, 2017

Subsystems (2)
Arm (32-bit) USB
lore
Share & tools
lore

Ran Wang

author
#0 lore raw

PATCH v4 1/5 arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig

Use Kconfig to select QE-HDLC and USB pin-mux.

Signed-off-by Ran Wang <[email protected]>
Reviewed-by Bin Meng <[email protected]>

---
Change in v4:
Typo correction.

Change in v3:
New patch file.

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 +++++++
 include/configs/ls1012afrdm.h             | 4 ----
 include/configs/ls1012aqds.h              | 4 ----
 include/configs/ls1012ardb.h              | 4 ----
 include/configs/ls1021aiot.h              | 4 ----
 include/configs/ls1021aqds.h              | 4 ----
 include/configs/ls1021atwr.h              | 4 ----
 include/configs/ls1043aqds.h              | 3 ---
 include/configs/ls1043ardb.h              | 3 ---
 include/configs/ls1046aqds.h              | 3 ---
 include/configs/ls1046ardb.h              | 3 ---
 include/configs/ls2080aqds.h              | 1 -
 include/configs/ls2080ardb.h              | 1 -
 scripts/config_whitelist.txt              | 1 -
 14 files changed, 7 insertions(+), 39 deletions(-)
arch/arm/cpu/armv8/fsl-layerscape/Kconfig +7 -0
index 3518d8601d..84e689b6e1 100644
@@ -489,3 +489,10 @@ config SYS_MC_RSV_MEM_ALIGN
 
 config SPL_LDSCRIPT
 	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+
+config HAS_FSL_XHCI_USB
+	bool
+	default y if ARCH_LS1043A || ARCH_LS1046A
+	help
+	  For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
+	  pins, select it when the pins are assigned to USB.
include/configs/ls1012afrdm.h +0 -4
index 6b1ba578e9..2e5af9cc4e 100644
@@ -34,12 +34,8 @@
 /*
 * USB
 */
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#endif
 
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
include/configs/ls1012aqds.h +0 -4
index b3121d2c21..e0949d0b53 100644
@@ -119,12 +119,8 @@
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#endif
 
 /*  MMC  */
 #ifdef CONFIG_MMC
include/configs/ls1012ardb.h +0 -4
index e9edcd2bc9..66ff004384 100644
@@ -22,12 +22,8 @@
 /*
 * USB
 */
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#endif
 
 /*
  * I2C IO expander
include/configs/ls1021aiot.h +0 -4
index 3fe7b8f44c..2cbea87d95 100644
@@ -20,12 +20,8 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
 /* XHCI Support - enabled by default */
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-#endif
 
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
include/configs/ls1021aqds.h +0 -4
index f3d3aa2271..0046ded536 100644
@@ -405,12 +405,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-#endif
 
 /*
  * Video
include/configs/ls1021atwr.h +0 -4
index 852ff57fb6..0172c9015d 100644
@@ -45,12 +45,8 @@
 #endif
 
 /* XHCI Support - enabled by default */
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-#endif
 
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
include/configs/ls1043aqds.h +0 -3
index 5aadd92efd..607c289d17 100644
@@ -371,11 +371,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-#endif
 
 /*
  * Miscellaneous configurable options
include/configs/ls1043ardb.h +0 -3
index ca1d862479..866817d579 100644
@@ -281,12 +281,9 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 #endif
-#endif
 
 /* SATA */
 #ifndef SPL_NO_SATA
include/configs/ls1046aqds.h +0 -3
index 9231cca9e9..d47616f2e7 100644
@@ -137,11 +137,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#endif
 
 /* SATA */
 #define CONFIG_LIBATA
include/configs/ls1046ardb.h +0 -3
index 7bbd4ada70..32b08d8229 100644
@@ -211,12 +211,9 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 #endif
-#endif
 
 /* SATA */
 #ifndef SPL_NO_SATA
include/configs/ls2080aqds.h +0 -1
index dcd1b0c35c..74a21ab4e1 100644
@@ -439,7 +439,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * USB
  */
-#define CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
include/configs/ls2080ardb.h +0 -1
index 9e9979e1c7..c368a56657 100644
@@ -336,7 +336,6 @@ unsigned long get_board_sys_clk(void);
 /*
  * USB
  */
-#define CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
scripts/config_whitelist.txt +0 -1
index 78bcf06878..41ecc9f2a6 100644
@@ -887,7 +887,6 @@ CONFIG_HAS_ETH7
 CONFIG_HAS_FEC
 CONFIG_HAS_FSL_DR_USB
 CONFIG_HAS_FSL_MPH_USB
-CONFIG_HAS_FSL_XHCI_USB
 CONFIG_HAS_POST
 CONFIG_HCLK_FREQ
 CONFIG_HDBOOT
Signature · 1 line
2.14.1
author
#1 lore raw

PATCH v4 2/5 usb: host: Move CONFIG_XHCI_FSL to Kconfig

use Kconfig to select xhci accordingly.

Signed-off-by Ran Wang <[email protected]>
Reviewed-by Bin Meng <[email protected]>

---
Change in v4:
Typo correction.

Change in v3:
New patch file.

 drivers/usb/host/Kconfig      | 6 ++++++
 include/configs/ls1012afrdm.h | 1 -
 include/configs/ls1012aqds.h  | 1 -
 include/configs/ls1012ardb.h  | 1 -
 include/configs/ls1021aiot.h  | 1 -
 include/configs/ls1021aqds.h  | 1 -
 include/configs/ls1021atwr.h  | 1 -
 include/configs/ls1043aqds.h  | 1 -
 include/configs/ls1043ardb.h  | 1 -
 include/configs/ls1046aqds.h  | 1 -
 include/configs/ls1046ardb.h  | 1 -
 include/configs/ls2080aqds.h  | 1 -
 include/configs/ls2080ardb.h  | 1 -
 scripts/config_whitelist.txt  | 1 -
 14 files changed, 6 insertions(+), 13 deletions(-)
drivers/usb/host/Kconfig +6 -0
index f797a2568c..5da846728a 100644
@@ -71,6 +71,12 @@ config USB_XHCI_DRA7XX_INDEX
 	  Select the DRA7XX xHCI USB index.
 	  Current supported values: 0, 1.
 
+config USB_XHCI_FSL
+	bool "Support for NXP Layerscape on-chip xHCI USB controller"
+	default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
+	depends on !SPL_NO_USB
+	help
+	  Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
 endif # USB_XHCI_HCD
 
 config USB_EHCI_HCD
include/configs/ls1012afrdm.h +0 -1
index 2e5af9cc4e..2e9c619bd5 100644
@@ -34,7 +34,6 @@
 /*
 * USB
 */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 #define CONFIG_CMD_MEMINFO
include/configs/ls1012aqds.h +0 -1
index e0949d0b53..70bf72c431 100644
@@ -119,7 +119,6 @@
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*  MMC  */
include/configs/ls1012ardb.h +0 -1
index 66ff004384..110fcc6323 100644
@@ -22,7 +22,6 @@
 /*
 * USB
 */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*
include/configs/ls1021aiot.h +0 -1
index 2cbea87d95..dac4a81e2a 100644
@@ -20,7 +20,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
 /* XHCI Support - enabled by default */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 
 #define CONFIG_SYS_CLK_FREQ		100000000
include/configs/ls1021aqds.h +0 -1
index 0046ded536..8346e3658f 100644
@@ -405,7 +405,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /*XHCI Support - enabled by default*/
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 
 /*
include/configs/ls1021atwr.h +0 -1
index 0172c9015d..8ccc81642d 100644
@@ -45,7 +45,6 @@
 #endif
 
 /* XHCI Support - enabled by default */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 
 #define CONFIG_SYS_CLK_FREQ		100000000
include/configs/ls1043aqds.h +0 -1
index 607c289d17..641ffc1400 100644
@@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 
 /*
include/configs/ls1043ardb.h +0 -1
index 866817d579..0e02be445a 100644
@@ -281,7 +281,6 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 #endif
include/configs/ls1046aqds.h +0 -1
index d47616f2e7..2f2602f098 100644
@@ -137,7 +137,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 
 /* SATA */
include/configs/ls1046ardb.h +0 -1
index 32b08d8229..40ce8ff462 100644
@@ -211,7 +211,6 @@
 
 /* USB */
 #ifndef SPL_NO_USB
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 #endif
include/configs/ls2080aqds.h +0 -1
index 74a21ab4e1..5a5debbfc0 100644
@@ -439,7 +439,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * USB
  */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 
 #include <asm/fsl_secure_boot.h>
include/configs/ls2080ardb.h +0 -1
index c368a56657..eef78f21b6 100644
@@ -336,7 +336,6 @@ unsigned long get_board_sys_clk(void);
 /*
  * USB
  */
-#define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 
 #undef CONFIG_CMDLINE_EDITING
scripts/config_whitelist.txt +0 -1
index 41ecc9f2a6..e31073cf9d 100644
@@ -5060,7 +5060,6 @@ CONFIG_USB_TTY
 CONFIG_USB_TUSB_OMAP_DMA
 CONFIG_USB_ULPI_TIMEOUT
 CONFIG_USB_XHCI_EXYNOS
-CONFIG_USB_XHCI_FSL
 CONFIG_USB_XHCI_KEYSTONE
 CONFIG_USB_XHCI_OMAP
 CONFIG_USER_LOWLEVEL_INIT
Signature · 1 line
2.14.1
author
#2 lore raw

PATCH v4 3/5 arm: layerscape: Remove CONFIG_USB_MAX_CONTROLLER_COUNT

In reply to Ran Wang

Because COMFIG_DM_USB has been enabled and will not use it anymore.

Signed-off-by Ran Wang <[email protected]>
Reviewed-by Bin Meng <[email protected]>

---
Change in v4:
Typo correction.

Change in v3:
New patch file.

 include/configs/ls1012afrdm.h | 5 -----
 include/configs/ls1012aqds.h  | 3 ---
 include/configs/ls1012ardb.h  | 4 ----
 include/configs/ls1021aiot.h  | 3 ---
 include/configs/ls1021aqds.h  | 3 ---
 include/configs/ls1021atwr.h  | 3 ---
 include/configs/ls1043aqds.h  | 3 ---
 include/configs/ls1043ardb.h  | 5 -----
 include/configs/ls1046aqds.h  | 3 ---
 include/configs/ls1046ardb.h  | 5 -----
 include/configs/ls2080aqds.h  | 5 -----
 include/configs/ls2080ardb.h  | 5 -----
 12 files changed, 47 deletions(-)
include/configs/ls1012afrdm.h +0 -5
index 2e9c619bd5..efb4c00cd9 100644
@@ -31,11 +31,6 @@
        "kernel_load=0x96000000\0"              \
        "kernel_size=0x2800000\0"
 
-/*
-* USB
-*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
include/configs/ls1012aqds.h +0 -3
index 70bf72c431..ffb512db45 100644
@@ -118,9 +118,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/*XHCI Support - enabled by default*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-
 /*  MMC  */
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
include/configs/ls1012ardb.h +0 -4
index 110fcc6323..0caa474636 100644
@@ -19,10 +19,6 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
-/*
-* USB
-*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 
 /*
  * I2C IO expander
include/configs/ls1021aiot.h +0 -3
index dac4a81e2a..c8eb234670 100644
@@ -19,9 +19,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
-/* XHCI Support - enabled by default */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
include/configs/ls1021aqds.h +0 -3
index 8346e3658f..6669f2f960 100644
@@ -404,9 +404,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/*XHCI Support - enabled by default*/
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-
 /*
  * Video
  */
include/configs/ls1021atwr.h +0 -3
index 8ccc81642d..0f20e5e2cc 100644
@@ -44,9 +44,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-/* XHCI Support - enabled by default */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
include/configs/ls1043aqds.h +0 -3
index 641ffc1400..8cc2abb2b6 100644
@@ -370,9 +370,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
-/* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-
 /*
  * Miscellaneous configurable options
  */
include/configs/ls1043ardb.h +0 -5
index 0e02be445a..762ecf1f4c 100644
@@ -279,11 +279,6 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #define CONFIG_LIBATA
include/configs/ls1046aqds.h +0 -3
index 2f2602f098..3ce66ce6f1 100644
@@ -136,9 +136,6 @@ unsigned long get_board_ddr_clk(void);
 #define CFG_LPUART_EN		0x2
 #endif
 
-/* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
include/configs/ls1046ardb.h +0 -5
index 40ce8ff462..bb27dd058a 100644
@@ -209,11 +209,6 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #define CONFIG_LIBATA
include/configs/ls2080aqds.h +0 -5
index 5a5debbfc0..497930dd9a 100644
@@ -436,11 +436,6 @@ unsigned long get_board_ddr_clk(void);
 
 #endif
 
-/*
- * USB
- */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS2_QDS_H */
include/configs/ls2080ardb.h +0 -5
index eef78f21b6..48c3a5397f 100644
@@ -333,11 +333,6 @@ unsigned long get_board_sys_clk(void);
 
 #define CONFIG_MISC_INIT_R
 
-/*
- * USB
- */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
-
 #undef CONFIG_CMDLINE_EDITING
 #include <config_distro_defaults.h>
Signature · 1 line
2.14.1
author
#3 lore raw

PATCH v4 4/5 ls1088ardb: Enable USB command RDB qspi-boot

In reply to Ran Wang
Signed-off-by Ashish Kumar <[email protected]>
Signed-off-by Amrita Kumari <[email protected]>
Signed-off-by Ran Wang <[email protected]>
Reviewed-by Bin Meng <[email protected]>

---
Change in v4:
Typo correction.

Change in v3:
1.Move HAS_FSL_XHCI_USB and USB_XHCI_FSL define to other patch file.

Change in v2:
1.Adjust USB nodes position in dts to keep them sorted in
unit-address.
2.Move macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL
to Kconfig option.
3.Remove CONFIG_USB_MAX_CONTROLLER_COUNT.

Change in v1:
Rebased to
ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1

 arch/arm/dts/fsl-ls1088a.dtsi     | 14 ++++++++++++++
 configs/ls1088ardb_qspi_defconfig |  8 ++++++++
 include/linux/usb/xhci-fsl.h      |  2 +-
 3 files changed, 23 insertions(+), 1 deletion(-)
arch/arm/dts/fsl-ls1088a.dtsi +14 -0
index d943a9efa3..64b4fcf12b 100644
@@ -76,6 +76,20 @@
 		num-cs = <4>;
 	};
 
+	usb0: usb3 at 3100000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 80 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
+	usb1: usb3 at 3110000 {
+		compatible = "fsl,layerscape-dwc3";
+		reg = <0x0 0x3110000 0x0 0x10000>;
+		interrupts = <0 81 0x4>; /* Level high type */
+		dr_mode = "host";
+	};
+
 	pcie at 3400000 {
 		compatible = "fsl,ls-pcie", "snps,dw-pcie";
 		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
configs/ls1088ardb_qspi_defconfig +8 -0
index 2d5a134261..3034f506e2 100644
@@ -31,3 +31,11 @@ CONFIG_FSL_DSPI=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_FSL_LS_PPA=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
include/linux/usb/xhci-fsl.h +1 -1
index bd54089722..a916afb885 100644
@@ -58,7 +58,7 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_ARCH_LS2080A)
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
Signature · 1 line
2.14.1
author
#4 lore raw

PATCH v4 5/5 ls1088aqds: Enable USB command on QDS for qspi-boot

In reply to Ran Wang
Signed-off-by Amrita Kumari <[email protected]>
Signed-off-by Ashish Kumar <[email protected]>
Signed-off-by Ran Wang <[email protected]>
Reviewed-by Bin Meng <[email protected]>

---
Change in v4:
Typo correction.

Change in v3:
- none

Change in v2:
Remove macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL and CONFIG_USB_MAX_CONTROLLER_COUNT from ls1088aqds.h since Kconfig option has covered.

Change in v1:
Rebased to
ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1

 configs/ls1088aqds_qspi_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)
configs/ls1088aqds_qspi_defconfig +8 -0
index 4b0d604fa0..a24a6011c9 100644
@@ -31,3 +31,11 @@ CONFIG_FSL_DSPI=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_FSL_LS_PPA=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
Signature · 1 line
2.14.1