VFS: use synchronize_rcu_expedited() in namespace_unlock()
PATCH 1/1 VFS: use synchronize_rcu_expedited() in namespace_unlock()
The synchronize_rcu() in namespace_unlock() is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.
The sequence:
mkdir -p /tmp/Mtest/{0..5000}
time for i in /tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount /tmp/Mtest/*
on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the synchronize_rcu() to synchronize_rcu_expedited() the umount time on a 4-cpu VM is 8 seconds to mount and 0.6 to unmount.
I think this 200-fold speed up is worth the slightly higher system impact of use synchronize_rcu_expedited().
---
Cc: to Paul and Josh in case they'll correct me if using _expedited() is really bad here.
Thanks,
NeilBrown
fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/namespace.c +1 -1
@@ -1420,7 +1420,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }
Signature · 1 line
2.14.0.rc0.dirty
Quoted 20 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM is 8 seconds to mount and 0.6 to unmount.
Quoted 8 lines
I think this 200-fold speed up is worth the slightly higher system impact of use
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Cc: to Paul and Josh in case they'll correct me if using
_expedited()is really bad here.
I suspect that filesystem unmount is pretty rare in production real-time workloads, which are the ones that might care. So I would guess that this is OK.
If the real-time guys ever do want to do filesystem unmounts while their real-time applications are running, they might modify this so that it can use synchronize_rcu() instead for real-time builds of the kernel.
But just for completeness, one way to make this work across the board might be to instead use call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)
Thanx, Paul
Quoted 23 lines
Thanks,
NeilBrownfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/namespace.c +1
-1@@ -1420,7 +1420,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }Signature · 1 line
2.14.0.rc0.dirty
Quoted 30 lines · Paul E. McKenney
Quoted 20 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM is 8 seconds to mount and 0.6 to unmount.Quoted 8 lines
I think this 200-fold speed up is worth the slightly higher system impact of use
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Cc: to Paul and Josh in case they'll correct me if using
_expedited()is really bad here.
Quoted 7 lines
I suspect that filesystem unmount is pretty rare in production real-time workloads, which are the ones that might care. So I would guess that this is OK.
If the real-time guys ever do want to do filesystem unmounts while their real-time applications are running, they might modify this so that it can use
synchronize_rcu()instead for real-time builds of the kernel.
Which they can already do using the rcupdate.rcu_normal boot parameter.
Thanx, Paul
Quoted 36 lines
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)Thanx, Paul
Quoted 23 lines
Thanks,
NeilBrownfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/namespace.c +1
-1@@ -1420,7 +1420,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }Signature · 1 line
2.14.0.rc0.dirty
Quoted 30 lines · Paul E. McKenney
Quoted 20 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM is 8 seconds to mount and 0.6 to unmount.Quoted 8 lines
I think this 200-fold speed up is worth the slightly higher system impact of use
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Cc: to Paul and Josh in case they'll correct me if using
_expedited()is really bad here.
Quoted 7 lines
I suspect that filesystem unmount is pretty rare in production real-time workloads, which are the ones that might care. So I would guess that this is OK.
If the real-time guys ever do want to do filesystem unmounts while their real-time applications are running, they might modify this so that it can use
synchronize_rcu()instead for real-time builds of the kernel.
Thanks for the confirmation Paul.
Quoted 9 lines
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)
I had briefly considered that option, but it doesn't work. The purpose of this synchronize_rcu() is to wait for any filename lookup which might be locklessly touching the mountpoint to complete. It is only after that that the real meat of unmount happen - the filesystem is told that the last reference is gone, and it gets to flush any saved changes out to disk etc.
That stuff really has to happen before the umount syscall returns.
Thanks,
NeilBrown
Quoted 52 lines · NeilBrown
Quoted 30 lines · Paul E. McKenney
Quoted 20 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM is 8 seconds to mount and 0.6 to unmount.Quoted 8 lines
I think this 200-fold speed up is worth the slightly higher system impact of use
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Cc: to Paul and Josh in case they'll correct me if using
_expedited()is really bad here.Quoted 7 lines
I suspect that filesystem unmount is pretty rare in production real-time workloads, which are the ones that might care. So I would guess that this is OK.
If the real-time guys ever do want to do filesystem unmounts while their real-time applications are running, they might modify this so that it can use
synchronize_rcu()instead for real-time builds of the kernel.Thanks for the confirmation Paul.
Quoted 9 lines
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)
Quoted 7 lines
I had briefly considered that option, but it doesn't work. The purpose of this
synchronize_rcu()is to wait for any filename lookup which might be locklessly touching the mountpoint to complete. It is only after that that the real meat of unmount happen - the filesystem is told that the last reference is gone, and it gets to flush any saved changes out to disk etc.
That stuff really has to happen before the umount syscall returns.
Hey, I was hoping! ;-)
Thanx, Paul
Quoted 8 lines · Paul E. McKenney
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)
You really need to complete all side effects of deallocating a resource before returning to user space. Otherwise, it will never be possible to allocate and deallocate resources in a tight loop because you either get spurious failures because too many unaccounted deallocations are stuck somewhere in the system (and the user can't tell that this is due to a race), or you get an OOM because the user manages to queue up too much state.
We already have this problem with RLIMIT_NPROC, where waitpid etc. return before the process is completely gone. On some kernels/configurations, the resulting race is so wide that parallel make no longer works reliable because it runs into fork failures.
Thanks,
Florian
Quoted 18 lines · Florian Weimer
Quoted 8 lines · Paul E. McKenney
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)You really need to complete all side effects of deallocating a resource before returning to user space. Otherwise, it will never be possible to allocate and deallocate resources in a tight loop because you either get spurious failures because too many unaccounted deallocations are stuck somewhere in the system (and the user can't tell that this is due to a race), or you get an OOM because the user manages to queue up too much state.
Quoted 4 lines
We already have this problem with
RLIMIT_NPROC, where waitpid etc. return before the process is completely gone. On some kernels/configurations, the resulting race is so wide that parallel make no longer works reliable because it runs into fork failures.
Or alternatively, use rcu_barrier() occasionally to wait for all preceding deferred deallocations. And there are quite a few other ways to take on this problem.
Thanx, Paul
Quoted 19 lines · Paul E. McKenney
Quoted 18 lines · Florian Weimer
Quoted 8 lines · Paul E. McKenney
But just for completeness, one way to make this work across the board might be to instead use
call_rcu(), with the callback function kicking off a workqueue handler to do the rest of the unmount. Of course, in saying that, I am ignoring any mutexes that you might be holding across this whole thing, and also ignoring any problems that might arise when returning to userspace with some portion of the unmount operation still pending. (For example, someone unmounting a filesystem and then immediately remounting that same filesystem.)You really need to complete all side effects of deallocating a resource before returning to user space. Otherwise, it will never be possible to allocate and deallocate resources in a tight loop because you either get spurious failures because too many unaccounted deallocations are stuck somewhere in the system (and the user can't tell that this is due to a race), or you get an OOM because the user manages to queue up too much state.
Quoted 8 lines
Quoted 4 lines
We already have this problem with
RLIMIT_NPROC, where waitpid etc. return before the process is completely gone. On some kernels/configurations, the resulting race is so wide that parallel make no longer works reliable because it runs into fork failures.Or alternatively, use
rcu_barrier()occasionally to wait for all preceding deferred deallocations. And there are quite a few other ways to take on this problem.
So, supposing we could package up everything that has to happen after the current synchronize_rcu() and put it in an call_rcu() call back, then instead of calling synchronize_rcu_expedited() at the end of namespace_unlock(), we could possibly call call_rcu() there and rcu_barrier() at the start of namespace_lock().....
That would mean a single unmount would have low impact, but it would still slow down a sequence of 1000 consecutive unmounts. Maybe we would only need the rcu_barrier() before select namespace_lock() calls. I would need to study the code closely to form an opinion. Interesting idea though.
Hopefully the _expedited() patch will be accepted - I haven't had a "nak" yet...
thanks,
NeilBrown
PATCH RESEND 1/1 VFS: use synchronize_rcu_expedited() in namespace_unlock()
The synchronize_rcu() in namespace_unlock() is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.
The sequence:
mkdir -p /tmp/Mtest/{0..5000}
time for i in /tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount /tmp/Mtest/*
on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the synchronize_rcu() to synchronize_rcu_expedited() the umount time on a 4-cpu VM drop to 0.6 seconds
I think this 200-fold speed up is worth the slightly high system impact of using synchronize_rcu_expedited().
---
I posted this last October, then again last November (cc:ing Linus) Paul is happy enough with it, but no other response.
I'm hoping it can get applied this time....
Thanks,
NeilBrown
fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/namespace.c +1 -1
@@ -1360,7 +1360,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }
Signature · 1 line
2.14.0.rc0.dirty
Al Viro
maintainerQuoted 22 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().
Quoted 7 lines
Signed-off-by NeilBrown <[email protected]>---
I posted this last October, then again last November (cc:ing Linus) Paul is happy enough with it, but no other response.
I'm hoping it can get applied this time....
Umm... IIRC, the last one got sidetracked on the other thing in the series... <checks> that was s_anon stuff. I can live with this one; FWIW, what kind of load would trigger the impact of the change? Paul?
Quoted 27 lines · Al Viro
Quoted 26 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Quoted 7 lines
Quoted 3 lines
I posted this last October, then again last November (cc:ing Linus) Paul is happy enough with it, but no other response.
I'm hoping it can get applied this time....Umm... IIRC, the last one got sidetracked on the other thing in the series... <checks> that was
s_anonstuff. I can live with this one; FWIW, what kind of load would trigger the impact of the change? Paul?
I think you would need a long sequence of umounts to notice anything. What you would notice is substantially reduced wall-clock time, but slightly increased CPU time.
The original bug report that lead to this patch was a system with "HUGE direct automount maps (>23k at this point)".
Stopping autofs (during shutdown) took more minutes than seemed reasonable.
I noticed it again just recently when working on a systemd issue. If you mount thousands of filesystems in quick succession (ClearCase can do this), systemd processes /proc/self/mountinfo constantly and slows down the whole process. When I unmount my test filesystems (mount --bind /etc /MNT/$1) it takes a similar amount of time, but now it isn't systemd slowing things down (which is odd actually, I wonder why systemd didn't notice..) but rather the synchronize_rcu() delays.
Thanks,
NeilBrown
Quoted 27 lines · Al Viro
Quoted 26 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().Signed-off-by NeilBrown <[email protected]>---
Quoted 7 lines
Quoted 3 lines
I posted this last October, then again last November (cc:ing Linus) Paul is happy enough with it, but no other response.
I'm hoping it can get applied this time....Umm... IIRC, the last one got sidetracked on the other thing in the series... <checks> that was
s_anonstuff. I can live with this one; FWIW, what kind of load would trigger the impact of the change? Paul?
You lost me with "what kind of load would trigger the impact of the change?", but if you are asking about the downside, that would be IPIs sent from each call to synchronize_rcu_expedited(). But people with things like real-time workloads that therefore don't like those IPIs have a number of options:
1. Boot with rcupdate.rcu_normal=1, which converts all calls to
synchronize_rcu_expedited() to synchronize_rcu(). This of course loses the performance gain, but this can be a good tradeoff for real-time workloads.
2. Build with CONFIG_NO_HZ_FULL=y and boot with nohz_full= to
cover the CPUs running your real-time workload. Then as long as there is only one runnable usermode task per nohz_full CPU, synchronize_rcu_expedited() will avoid sending IPIs to any of the nohz_full CPUs.
3. Don't do unmounts while your real-time application is running.
Probably other options as well, but those are the ones that come immediately to mind.
If I missed the point of your question, please help me understand what you are asking for.
Thanx, Paul
NeilBrown
Acked-by Paul E. McKenneyThe synchronize_rcu() in namespace_unlock() is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.
The sequence:
mkdir -p /tmp/Mtest/{0..5000}
time for i in /tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount /tmp/Mtest/*
on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the synchronize_rcu() to synchronize_rcu_expedited() the umount time on a 4-cpu VM drop to 0.6 seconds
I think this 200-fold speed up is worth the slightly high system impact of using synchronize_rcu_expedited().
---
Al Viro says "I can live with this one" but this still hasn't landed. Maybe someone else could apply it?
Thanks,
NeilBrown
Full quote from Al on 5th Oct:
Quoted 3 lines
Umm... IIRC, the last one got sidetracked on the other thing in the series... <checks> that was
s_anonstuff. I can live with this one; FWIW, what kind of load would trigger the impact of the change? Paul?
which Paul replied to.
fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/namespace.c +1 -1
@@ -1360,7 +1360,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }
Signature · 1 line
2.14.0.rc0.dirty
Al Viro
maintainerQuoted 22 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().
Quoted 6 lines
Signed-off-by NeilBrown <[email protected]>---
Al Viro says "I can live with this one" but this still hasn't landed. Maybe someone else could apply it?
Applied (in work.misc, once I push it out)
Quoted 23 lines · Al Viro
Quoted 22 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().
Quoted 8 lines
Quoted 6 lines
Signed-off-by NeilBrown <[email protected]>---
Al Viro says "I can live with this one" but this still hasn't landed. Maybe someone else could apply it?
Applied (in work.misc, once I push it out)
Excellent - thanks a lot :-)
NeilBrown
Quoted 21 lines · NeilBrown
The
synchronize_rcu()innamespace_unlock()is called every time a filesystem is unmounted. If a great many filesystems are mounted, this can cause a noticable slow-down in, for example, system shutdown.The sequence:
mkdir -p/tmp/Mtest/{0..5000}
time for i in/tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done time umount/tmp/Mtest/*on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and 100 seconds to unmount them.
Boot the same VM with 1 CPU and it takes 18 seconds to mount the tmpfs filesystems, but only 36 to unmount.
If we change the
synchronize_rcu()tosynchronize_rcu_expedited()the umount time on a 4-cpu VM drop to 0.6 secondsI think this 200-fold speed up is worth the slightly high system impact of using
synchronize_rcu_expedited().
Quoted 7 lines
Signed-off-by NeilBrown <[email protected]>---
I posted this last October, then again last November (cc:ing Linus) Paul is happy enough with it, but no other response.
I'm hoping it can get applied this time....
Hi Al,
this isn't in 4.20-rc1. Are you still waiting for something?
Thanks,
NeilBrown
Quoted 23 lines
Thanks,
NeilBrownfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/namespace.c +1
-1@@ -1360,7 +1360,7 @@ static void namespace_unlock(void)if (likely (hlist_empty (&head)))return ; -synchronize_rcu (); +synchronize_rcu_expedited ();group_pin_kill (&head); }Signature · 1 line
2.14.0.rc0.dirty