hwmon: (pmbus/core): Prevent unintentional setting of page to 0xFF
PATCH v2 1/1 hwmon: (pmbus/core): Prevent unintentional setting of page to 0xFF
From: "Edward A. James" <[email protected]>
The pmbus core may call read/write word data functions with a page value of -1, intending to perform the operation without setting the page. However, the read/write word data functions accept only unsigned 8-bit page numbers, and therefore cannot check for negative page number to avoid setting the page. This results in setting the page number to 0xFF. This may result in errors or undefined behavior of some devices (specifically the ir35221, which allows the page to be set to 0xFF, but some subsequent operations to read registers may fail).
Switch the pmbus_set_page page parameter to an integer and perform the check for negative page there. Make read/write functions consistent in accepting an integer page number parameter.
---
Changes since v1:
* Move check for negative page to pmbus_set_page and change pmbus_set_page page parameter to int.
drivers/hwmon/pmbus/pmbus.h | 6 +++--- drivers/hwmon/pmbus/pmbus_core.c | 25 +++++++++++-------------- 2 files changed, 14 insertions(+), 17 deletions(-)
drivers/hwmon/pmbus/pmbus.h +3 -3
@@ -404,9 +404,9 @@ struct pmbus_driver_info {/* Function declarations */ void pmbus_clear_cache (struct i2c_client *client); -int pmbus_set_page (struct i2c_client *client,u8 page); -int pmbus_read_word_data (struct i2c_client *client,u8 page,u8 reg); -int pmbus_write_word_data (struct i2c_client *client,u8 page,u8 reg,u16 word); +int pmbus_set_page (struct i2c_client *client,int page); +int pmbus_read_word_data (struct i2c_client *client,int page,u8 reg); +int pmbus_write_word_data (struct i2c_client *client,int page,u8 reg,u16 word);int pmbus_read_byte_data (struct i2c_client *client,int page,u8 reg);int pmbus_write_byte (struct i2c_client *client,int page,u8 value); int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
drivers/hwmon/pmbus/pmbus_core.c +11 -14
@@ -136,13 +136,13 @@ void pmbus_clear_cache(struct i2c_client *client) }EXPORT_SYMBOL_GPL (pmbus_clear_cache); -int pmbus_set_page (struct i2c_client *client,u8 page) +int pmbus_set_page (struct i2c_client *client,int page) {struct pmbus_data *data =i2c_get_clientdata (client);int rv =0 ;int newpage; -if (page != data->currpage) { +if (page >=0 && page != data->currpage) { rv =i2c_smbus_write_byte_data (client,PMBUS_PAGE , page); newpage =i2c_smbus_read_byte_data (client,PMBUS_PAGE );if (newpage != page)
@@ -158,11 +158,9 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value) {int rv; -if (page >=0 ) { - rv =pmbus_set_page (client, page); -if (rv <0 ) -return rv; - } + rv =pmbus_set_page (client, page); +if (rv <0 ) +return rv;return i2c_smbus_write_byte (client, value); }
@@ -186,7 +184,8 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)return pmbus_write_byte (client, page, value); } -int pmbus_write_word_data (struct i2c_client *client,u8 page,u8 reg,u16 word) +int pmbus_write_word_data (struct i2c_client *client,int page,u8 reg, +u16 word) {int rv;
@@ -219,7 +218,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,return pmbus_write_word_data (client, page, reg, word); } -int pmbus_read_word_data (struct i2c_client *client,u8 page,u8 reg) +int pmbus_read_word_data (struct i2c_client *client,int page,u8 reg) {int rv;
@@ -255,11 +254,9 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg) {int rv; -if (page >=0 ) { - rv =pmbus_set_page (client, page); -if (rv <0 ) -return rv; - } + rv =pmbus_set_page (client, page); +if (rv <0 ) +return rv;return i2c_smbus_read_byte_data (client, reg); }
Signature · 1 line
1.8.3.1
Quoted 11 lines · On Fri, Oct 27, 2017 at 11:55:05AM -0500, [email protected] wrote:
From: "Edward A. James" <[email protected]>
The pmbus core may call read/write word data functions with a page value of -1, intending to perform the operation without setting the page. However, the read/write word data functions accept only unsigned 8-bit page numbers, and therefore cannot check for negative page number to avoid setting the page. This results in setting the page number to
0xFF. This may result in errors or undefined behavior of some devices (specifically the ir35221, which allows the page to be set to0xFF, but some subsequent operations to read registers may fail).
Quoted 5 lines
Switch the
pmbus_set_pagepage parameter to an integer and perform the check for negative page there. Make read/write functions consistent in accepting an integer page number parameter.Signed-off-by Edward A. James <[email protected]>
Applied. Note that the problem was introduced with commit cbcdec6202c9 ("hwmon: (pmbus): Access word data for STATUS_WORD"). I marked the patch accordingly.
Thanks,
Guenter
Quoted 96 lines
---
Changes since v1:
* Move check for negative page topmbus_set_pageand changepmbus_set_pagepage parameter to int.drivers/hwmon/pmbus/pmbus.h | 6 +++--- drivers/hwmon/pmbus/pmbus_core.c | 25 +++++++++++-------------- 2 files changed, 14 insertions(+), 17 deletions(-)drivers/hwmon/pmbus/pmbus.h +3
-3@@ -404,9 +404,9 @@ struct pmbus_driver_info {/* Function declarations */ void pmbus_clear_cache (struct i2c_client *client); -int pmbus_set_page (struct i2c_client *client,u8 page); -int pmbus_read_word_data (struct i2c_client *client,u8 page,u8 reg); -int pmbus_write_word_data (struct i2c_client *client,u8 page,u8 reg,u16 word); +int pmbus_set_page (struct i2c_client *client,int page); +int pmbus_read_word_data (struct i2c_client *client,int page,u8 reg); +int pmbus_write_word_data (struct i2c_client *client,int page,u8 reg,u16 word);int pmbus_read_byte_data (struct i2c_client *client,int page,u8 reg);int pmbus_write_byte (struct i2c_client *client,int page,u8 value); int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,drivers/hwmon/pmbus/pmbus_core.c +11
-14@@ -136,13 +136,13 @@ void pmbus_clear_cache(struct i2c_client *client) }EXPORT_SYMBOL_GPL (pmbus_clear_cache); -int pmbus_set_page (struct i2c_client *client,u8 page) +int pmbus_set_page (struct i2c_client *client,int page) {struct pmbus_data *data =i2c_get_clientdata (client);int rv =0 ;int newpage; -if (page != data->currpage) { +if (page >=0 && page != data->currpage) { rv =i2c_smbus_write_byte_data (client,PMBUS_PAGE , page); newpage =i2c_smbus_read_byte_data (client,PMBUS_PAGE );if (newpage != page)@@ -158,11 +158,9 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value) {int rv; -if (page >=0 ) { - rv =pmbus_set_page (client, page); -if (rv <0 ) -return rv; - } + rv =pmbus_set_page (client, page); +if (rv <0 ) +return rv;return i2c_smbus_write_byte (client, value); }@@ -186,7 +184,8 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)return pmbus_write_byte (client, page, value); } -int pmbus_write_word_data (struct i2c_client *client,u8 page,u8 reg,u16 word) +int pmbus_write_word_data (struct i2c_client *client,int page,u8 reg, +u16 word) {int rv;@@ -219,7 +218,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,return pmbus_write_word_data (client, page, reg, word); } -int pmbus_read_word_data (struct i2c_client *client,u8 page,u8 reg) +int pmbus_read_word_data (struct i2c_client *client,int page,u8 reg) {int rv;@@ -255,11 +254,9 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg) {int rv; -if (page >=0 ) { - rv =pmbus_set_page (client, page); -if (rv <0 ) -return rv; - } + rv =pmbus_set_page (client, page); +if (rv <0 ) +return rv;return i2c_smbus_read_byte_data (client, reg); }