configs: vf610: increase maximum size and enforce correct limit
PATCH 1/1 configs: vf610: increase maximum size and enforce correct limit
From: Stefan Agner <[email protected]>
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary.
The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards.
---
include/configs/colibri_vf.h | 4 ++-- include/configs/pcm052.h | 4 ++-- include/configs/vf610twr.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)
include/configs/colibri_vf.h +2 -2
@@ -75,8 +75,8 @@#define CONFIG_FDTADDR 0x84000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192#define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
include/configs/pcm052.h +2 -2
@@ -89,8 +89,8 @@#define CONFIG_LOADADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* if no target-specific extra environment settings were defined by the target, define an empty one */
include/configs/vf610twr.h +2 -2
@@ -79,8 +79,8 @@#define CONFIG_SYS_LOAD_ADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* * We do have 128MB of memory on the Vybrid Tower board. Leave the last
Signature · 1 line
2.14.2
PATCH 1/1 configs: vf610: increase maximum size and enforce correct limit
Hi Tom, Stefano,
Any chance to get this still into 2017.11? It allows to use 2017.11 on my board...
--
Stefan
Quoted 66 lines · Stefan Agner
From: Stefan Agner <[email protected]>
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary.
The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards.
Signed-off-by Stefan Agner <[email protected]>---
include/configs/colibri_vf.h | 4 ++-- include/configs/pcm052.h | 4 ++-- include/configs/vf610twr.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)include/configs/colibri_vf.h +2
-2@@ -75,8 +75,8 @@#define CONFIG_FDTADDR 0x84000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192#define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \include/configs/pcm052.h +2
-2@@ -89,8 +89,8 @@#define CONFIG_LOADADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* if no target-specific extra environment settings were defined by the target, define an empty one */ include/configs/vf610twr.h +2
-2@@ -79,8 +79,8 @@#define CONFIG_SYS_LOAD_ADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* * We do have 128MB of memory on the Vybrid Tower board. Leave the last
PATCH 1/1 configs: vf610: increase maximum size and enforce correct limit
Quoted 4 lines · Stefan Agner
Hi Tom, Stefano,
Any chance to get this still into 2017.11? It allows to use 2017.11 on my board...
Stefano, this is your call, thanks!
Quoted 75 lines
--
StefanQuoted 56 lines · Stefan Agner
From: Stefan Agner <[email protected]>
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary.
The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards.
Signed-off-by Stefan Agner <[email protected]>---
include/configs/colibri_vf.h | 4 ++-- include/configs/pcm052.h | 4 ++-- include/configs/vf610twr.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)include/configs/colibri_vf.h +2
-2@@ -75,8 +75,8 @@#define CONFIG_FDTADDR 0x84000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192#define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \include/configs/pcm052.h +2
-2@@ -89,8 +89,8 @@#define CONFIG_LOADADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* if no target-specific extra environment settings were defined by the target, define an empty one */ include/configs/vf610twr.h +0
-0include/configs/vf610twr.h line 86
Quoted 10 lines
include/configs/vf610twr.h +2
-2@@ -79,8 +79,8 @@#define CONFIG_SYS_LOAD_ADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* * We do have 128MB of memory on the Vybrid Tower board. Leave the last _______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171030/72b37f2f/attachment.sig>
PATCH 1/1 configs: vf610: increase maximum size and enforce correct limit
Hi Tom, Stefan,
Quoted 7 lines · Tom Rini
Quoted 4 lines · Stefan Agner
Hi Tom, Stefano,
Any chance to get this still into 2017.11? It allows to use 2017.11 on my board...
Stefano, this is your call, thanks!
I looking into the list to pick up all remaining patches - this go in !
Regards,
Stefano
Quoted 77 lines
Quoted 76 lines
--
StefanQuoted 56 lines · Stefan Agner
From: Stefan Agner <[email protected]>
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary.
The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards.
Signed-off-by Stefan Agner <[email protected]>---
include/configs/colibri_vf.h | 4 ++-- include/configs/pcm052.h | 4 ++-- include/configs/vf610twr.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)include/configs/colibri_vf.h +2
-2@@ -75,8 +75,8 @@#define CONFIG_FDTADDR 0x84000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192#define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \include/configs/pcm052.h +2
-2@@ -89,8 +89,8 @@#define CONFIG_LOADADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* if no target-specific extra environment settings were defined by the target, define an empty one */ include/configs/vf610twr.h +0
-0include/configs/vf610twr.h line 86
Quoted 10 lines
include/configs/vf610twr.h +2
-2@@ -79,8 +79,8 @@#define CONFIG_SYS_LOAD_ADDR 0x82000000/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192/* * We do have 128MB of memory on the Vybrid Tower board. Leave the last _______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================