ARM: dts: imx6: RDU2: add i210 node
Subsystems (2)
PATCH 1/1 ARM: dts: imx6: RDU2: add i210 node
This is needed for the bootloader to patch in the correct MAC address.
Signed-off-by Lucas Stach <[email protected]>
--- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +12 -0
@@ -580,6 +580,18 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; + + host at 0 { + reg = <0 0 0 0 0>; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + i210: i210 at 0 { + reg = <0 0 0 0 0>; + }; + }; }; &usdhc2 {
Signature · 1 line
2.11.0
PATCH 1/1 ARM: dts: imx6: RDU2: add i210 node
Quoted 3 lines · Lucas Stach
This is needed for the bootloader to patch in the correct MAC address.
Signed-off-by Lucas Stach <[email protected]>
Reviewed-by Andrew Lunn <[email protected]>
Andrew
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx6: RDU2: add i210 node
In reply to Lucas StachQuoted 3 lines · Lucas Stach
This is needed for the bootloader to patch in the correct MAC address.
Signed-off-by Lucas Stach <[email protected]>
Applied, thanks.