3.18.81-stable review

This is the start of the stable review cycle for the 3.18.81 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Nov 15 12:53:41 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.81-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.18.81-rc1

Borislav Petkov <[email protected]>
x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context

Richard Schütz <[email protected]>
can: c_can: don't indicate triple sampling support for D_CAN

Ilya Dryomov <[email protected]>
rbd: use GFP_NOIO for parent stat and data requests

Oswald Buddenhagen <[email protected]>
MIPS: AR7: Ensure that serial ports are properly set up

Paul Burton <[email protected]>
MIPS: Fix CM region target definitions

Gustavo A. R. Silva <[email protected]>
MIPS: microMIPS: Fix incorrect mask in insn_table_MM

Takashi Iwai <[email protected]>
ALSA: seq: Avoid invalid lockdep class warning

Takashi Iwai <[email protected]>
ALSA: seq: Fix OSS sysex delivery in OSS emulation

Mark Rutland <[email protected]>
ARM: 8720/1: ensure dump_instr() checks addr_limit

Eric Biggers <[email protected]>
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]

Andrey Ryabinin <[email protected]>
crypto: x86/sha1-mb - fix panic due to unaligned access

Eric Biggers <[email protected]>
KEYS: trusted: fix writing past end of buffer in trusted_read()

Eric Biggers <[email protected]>
KEYS: trusted: sanitize all key material

Feras Daoud <[email protected]>
IB/ipoib: Change list_del to list_del_init in the tx object

Akinobu Mita <[email protected]>
Input: mpr121 - set missing event capability

Akinobu Mita <[email protected]>
Input: mpr121 - handle multiple bits change of status register

Gilad Ben-Yossef <[email protected]>
IPsec: do not ignore crypto err in ah4 input

William wu <[email protected]>

    usb: hcd: initialize hcd->flags to 0 when rm hcd

Laurent Pinchart <[email protected]>
serial: sh-sci: Fix register offsets for the IRDA serial port

Volodymyr Bendiuga <[email protected]>
phy: increase size of MII_BUS_ID_SIZE and bus_id

David Lechner <[email protected]>
dt-bindings: Add vendor prefix for LEGO

David Lechner <[email protected]>
dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification

Alison Schofield <[email protected]>
iio: trigger: free trigger resource correctly

Tony Lindgren <[email protected]>
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6

Noralf Trønnes <[email protected]>
drm: drm_minor_register(): Clean up debugfs on failure

Patrick Bruenn <[email protected]>
ARM: dts: imx53-qsb-common: fix FEC pinmux config

Juergen Gross <[email protected]>
xen/netback: set default upper limit of tx/rx queues to 8

Maciej W. Rozycki <[email protected]>
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation

-------------

Diffstat:

 Documentation/devicetree/bindings/arm/davinci.txt  |  4 ++
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 Makefile                                           |  4 +-
 arch/arm/boot/dts/imx53-qsb-common.dtsi            | 20 +++----
 arch/arm/configs/omap2plus_defconfig               |  1 +
 arch/arm/kernel/traps.c                            | 28 +++++----
 arch/mips/ar7/platform.c                           |  1 +
 arch/mips/include/asm/mips-cm.h                    |  4 +-
 arch/mips/mm/uasm-micromips.c                      |  2 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c              |  1 -
 arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S    | 12 ++--
 arch/x86/oprofile/op_model_ppro.c                  |  4 +-
 drivers/block/rbd.c                                |  4 +-
 drivers/gpu/drm/drm_drv.c                          |  2 +-
 drivers/iio/trigger/iio-trig-interrupt.c           |  8 +--
 drivers/iio/trigger/iio-trig-sysfs.c               |  2 +-
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |  2 +-
 drivers/input/keyboard/mpr121_touchkey.c           | 24 +++++---
 drivers/net/can/c_can/c_can_pci.c                  |  1 -
 drivers/net/can/c_can/c_can_platform.c             |  1 -
 drivers/net/xen-netback/netback.c                  |  6 +-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c  |  4 +-
 drivers/tty/serial/sh-sci.c                        | 17 +++---
 drivers/usb/core/hcd.c                             |  1 +
 drivers/video/fbdev/pmag-ba-fb.c                   |  2 +-
 include/linux/phy.h                                |  8 +--
 include/sound/seq_kernel.h                         |  3 +-
 lib/asn1_decoder.c                                 |  4 +-
 net/ipv4/ah4.c                                     |  3 +
 security/keys/trusted.c                            | 70 ++++++++++------------
 sound/core/seq/oss/seq_oss_midi.c                  |  4 +-
 sound/core/seq/oss/seq_oss_readq.c                 | 29 +++++++++
 sound/core/seq/oss/seq_oss_readq.h                 |  2 +
 33 files changed, 162 insertions(+), 117 deletions(-)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Maciej W. Rozycki" <[email protected]>

[ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ]

Fix:

WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe()
references the function __init pmagbafb_erase_cursor().
This is often because pmagbafb_probe lacks a __init
annotation or the annotation of pmagbafb_erase_cursor is wrong.

-- a fallout from a missed update from commit 9625b51350cc ("VIDEO:
PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers:
video: remove __dev* attributes.")

---
 drivers/video/fbdev/pmag-ba-fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = {
 /*
  * Turn the hardware cursor off.
  */
-static void __init pmagbafb_erase_cursor(struct fb_info *info)
+static void pmagbafb_erase_cursor(struct fb_info *info)
 {
 	struct pmagbafb_par *par = info->par;
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Juergen Gross <[email protected]>

[ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ]

The default for the maximum number of tx/rx queues of one interface is the number of cpus of the system today. As each queue pair reserves 512 grant pages this default consumes a ridiculous number of grants for large guests.

Limit the queue number to 8 as default. This value can be modified via a module parameter if required.

---
 drivers/net/xen-netback/netback.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uin
 unsigned int rx_stall_timeout_msecs = 60000;
 module_param(rx_stall_timeout_msecs, uint, 0444);
 
+#define MAX_QUEUES_DEFAULT 8
 unsigned int xenvif_max_queues;
 module_param_named(max_queues, xenvif_max_queues, uint, 0644);
 MODULE_PARM_DESC(max_queues,

@@ -2189,11 +2190,12 @@ static int __init netback_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	/* Allow as many queues as there are CPUs if user has not
+	/* Allow as many queues as there are CPUs but max. 8 if user has not
 	 * specified a value.
 	 */
 	if (xenvif_max_queues == 0)
-		xenvif_max_queues = num_online_cpus();
+		xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT,
+					  num_online_cpus());
 
 	if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
 		pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Patrick Bruenn <[email protected]>

[ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ]

The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too.

---
 arch/arm/boot/dts/imx53-qsb-common.dtsi |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

@@ -215,16 +215,16 @@
 
 		pinctrl_fec: fecgrp {
 			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
 			>;
 		};
 

As discussed for 4.4 stable queue this patch might break existing machines, if they use a different pinmux configuration with their own bootloader. I would drop it from 3.18, too.

Regards,
Patrick

Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff Registered office: Verl, Germany | Register court: Guetersloh HRA 7075

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <[email protected]>

[ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ]

We have more than four uarts on some SoCs and that can cause noise with errors while booting.

---
 arch/arm/configs/omap2plus_defconfig |    1 +
 1 file changed, 1 insertion(+)

@@ -169,6 +169,7 @@ CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alison Schofield <[email protected]>

[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]

These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

---
 drivers/iio/trigger/iio-trig-interrupt.c          |    8 ++++----
 drivers/iio/trigger/iio-trig-sysfs.c              |    2 +-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c |    4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

@@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(s
 	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
 	if (!trig_info) {
 		ret = -ENOMEM;
-		goto error_put_trigger;
+		goto error_free_trigger;
 	}
 	iio_trigger_set_drvdata(trig, trig_info);
 	trig_info->irq = irq;

@@ -83,8 +83,8 @@ error_release_irq:
 	free_irq(irq, trig);
 error_free_trig_info:
 	kfree(trig_info);
-error_put_trigger:
-	iio_trigger_put(trig);
+error_free_trigger:
+	iio_trigger_free(trig);
 error_ret:
 	return ret;
 }

@@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(
 	iio_trigger_unregister(trig);
 	free_irq(trig_info->irq, trig);
 	kfree(trig_info);
-	iio_trigger_put(trig);
+	iio_trigger_free(trig);
 
 	return 0;
 }

@@ -173,7 +173,7 @@ static int iio_sysfs_trigger_probe(int i
 	return 0;
 
 out2:
-	iio_trigger_put(t->trig);
+	iio_trigger_free(t->trig);
 free_t:
 	kfree(t);
 out1:

@@ -258,7 +258,7 @@ out_free_irq:
 out1:
 	iio_trigger_unregister(st->trig);
 out:
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 	return ret;
 }
 

@@ -271,7 +271,7 @@ static int iio_bfin_tmr_trigger_remove(s
 		peripheral_free(st->t->pin);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 
 	return 0;
 }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Lechner <[email protected]>

[ Upstream commit 21078ab174c99885ca83a5c32db0d33b1617745e ]

This adds the board level device tree specification for LEGO MINDSTORMS EV3

---
 Documentation/devicetree/bindings/arm/davinci.txt |    4 ++++
 1 file changed, 4 insertions(+)

@@ -9,6 +9,10 @@ EnBW AM1808 based CMC board
 Required root node properties:
     - compatible = "enbw,cmc", "ti,da850;
 
+LEGO MINDSTORMS EV3 (AM1808 based)
+Required root node properties:
+    - compatible = "lego,ev3", "ti,da850";
+
 Generic DaVinci Boards
 ----------------------
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Lechner <[email protected]>

[ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ]

Add a vendor prefix for LEGO Systems A/S

---
 Documentation/devicetree/bindings/vendor-prefixes.txt |    1 +
 1 file changed, 1 insertion(+)

@@ -83,6 +83,7 @@ karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 lacie	LaCie
 lantiq	Lantiq Semiconductor
+lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
 linux	Linux-specific binding

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <[email protected]>

[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ]

Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value.

---
 arch/sh/kernel/cpu/sh3/setup-sh770x.c |    1 -
 drivers/tty/serial/sh-sci.c           |   17 ++++++++---------
 2 files changed, 8 insertions(+), 10 deletions(-)

@@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.type		= PORT_IRDA,
 	.ops		= &sh770x_sci_port_ops,
-	.regshift	= 1,
 };
 
 static struct resource scif2_resources[] = {

@@ -171,18 +171,17 @@ static struct plat_sci_reg sci_regmap[SC
 	},
 
 	/*
-	 * Common definitions for legacy IrDA ports, dependent on
-	 * regshift value.
+	 * Common definitions for legacy IrDA ports.
 	 */
 	[SCIx_IRDA_REGTYPE] = {
 		[SCSMR]		= { 0x00,  8 },
-		[SCBRR]		= { 0x01,  8 },
-		[SCSCR]		= { 0x02,  8 },
-		[SCxTDR]	= { 0x03,  8 },
-		[SCxSR]		= { 0x04,  8 },
-		[SCxRDR]	= { 0x05,  8 },
-		[SCFCR]		= { 0x06,  8 },
-		[SCFDR]		= { 0x07, 16 },
+		[SCBRR]		= { 0x02,  8 },
+		[SCSCR]		= { 0x04,  8 },
+		[SCxTDR]	= { 0x06,  8 },
+		[SCxSR]		= { 0x08, 16 },
+		[SCxRDR]	= { 0x0a,  8 },
+		[SCFCR]		= { 0x0c,  8 },
+		[SCFDR]		= { 0x0e, 16 },
 		[SCTFDR]	= sci_reg_invalid,
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: William wu <[email protected]>

[ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ]

On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale.

If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add.

[173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
[173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[173.297222] usb usb6: Product: xHCI Host Controller
[173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd
[173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto
[173.298680] hub 6-0:1.0: USB hub found
[173.298749] hub 6-0:1.0: 1 port detected
[173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected
[173.395418] hub 5-0:1.0: activate --> -19
[173.603447] irq 228: nobody cared (try booting with the "irqpoll" option)
[173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9
[173.603513] Hardware name: Google Kevin (DT)
[173.603531] Call trace:
[173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160
[173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28
[173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0
[173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8
[173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c
[173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c
[173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c
[173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124
[173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44
[173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc
[173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188
...
[173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8
[173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc
[173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94
[173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc
[173.604607] [<0000000000b16000>] 0xb16000
[173.604622] handlers:
[173.604648] [<ffffffc000642084>] usb_hcd_irq
[173.604673] Disabling IRQ #228

---
 drivers/usb/core/hcd.c |    1 +
 1 file changed, 1 insertion(+)

@@ -2927,6 +2927,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	}
 
 	usb_put_invalidate_rhdev(hcd);
+	hcd->flags = 0;
 }
 EXPORT_SYMBOL_GPL(usb_remove_hcd);
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gilad Ben-Yossef <[email protected]>

[ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ]

ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored.

Treat a crypto API error indication as a verification failure.

While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong.

---
 net/ipv4/ah4.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_
 	int ihl = ip_hdrlen(skb);
 	int ah_hlen = (ah->hdrlen + 2) << 2;
 
+	if (err)
+		goto out;
+
 	work_iph = AH_SKB_CB(skb)->tmp;
 	auth_data = ah_tmp_auth(work_iph, ihl);
 	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Akinobu Mita <[email protected]>

[ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ]

This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

---
 drivers/input/keyboard/mpr121_touchkey.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

@@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrup
 	struct mpr121_touchkey *mpr121 = dev_id;
 	struct i2c_client *client = mpr121->client;
 	struct input_dev *input = mpr121->input_dev;
-	unsigned int key_num, key_val, pressed;
+	unsigned long bit_changed;
+	unsigned int key_num;
 	int reg;
 
 	reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);

@@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrup
 
 	reg &= TOUCH_STATUS_MASK;
 	/* use old press bit to figure out which bit changed */
-	key_num = ffs(reg ^ mpr121->statusbits) - 1;
-	pressed = reg & (1 << key_num);
+	bit_changed = reg ^ mpr121->statusbits;
 	mpr121->statusbits = reg;
+	for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
+		unsigned int key_val, pressed;
 
-	key_val = mpr121->keycodes[key_num];
+		pressed = reg & BIT(key_num);
+		key_val = mpr121->keycodes[key_num];
 
-	input_event(input, EV_MSC, MSC_SCAN, key_num);
-	input_report_key(input, key_val, pressed);
-	input_sync(input);
+		input_event(input, EV_MSC, MSC_SCAN, key_num);
+		input_report_key(input, key_val, pressed);
+
+		dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+			pressed ? "pressed" : "released");
 
-	dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
-		pressed ? "pressed" : "released");
+	}
+	input_sync(input);
 
 out:
 	return IRQ_HANDLED;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Akinobu Mita <[email protected]>

[ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ]

This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored.

This change adds the missing event capability.

---
 drivers/input/keyboard/mpr121_touchkey.c |    1 +
 1 file changed, 1 insertion(+)

@@ -235,6 +235,7 @@ static int mpr_touchkey_probe(struct i2c
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	input_dev->keycode = mpr121->keycodes;
 	input_dev->keycodesize = sizeof(mpr121->keycodes[0]);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Feras Daoud <[email protected]>

[ Upstream commit 27d41d29c7f093f6f77843624fbb080c1b4a8b9c ]

Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel.
In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object.
Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem.

---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1362,7 +1362,7 @@ static void ipoib_cm_tx_reap(struct work
 
 	while (!list_empty(&priv->cm.reap_list)) {
 		p = list_entry(priv->cm.reap_list.next, typeof(*p), list);
-		list_del(&p->list);
+		list_del_init(&p->list);
 		spin_unlock_irqrestore(&priv->lock, flags);
 		netif_tx_unlock_bh(dev);
 		ipoib_cm_tx_destroy(p);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit ee618b4619b72527aaed765f0f0b74072b281159 upstream.

As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths.

---
 security/keys/trusted.c |   49 +++++++++++++++++++++---------------------------
 1 file changed, 22 insertions(+), 27 deletions(-)

@@ -69,7 +69,7 @@ static int TSS_sha1(const unsigned char
 	}
 
 	ret = crypto_shash_digest(&sdesc->shash, data, datalen, digest);
-	kfree(sdesc);
+	kzfree(sdesc);
 	return ret;
 }
 

@@ -113,7 +113,7 @@ static int TSS_rawhmac(unsigned char *di
 	if (!ret)
 		ret = crypto_shash_final(&sdesc->shash, digest);
 out:
-	kfree(sdesc);
+	kzfree(sdesc);
 	return ret;
 }
 

@@ -164,7 +164,7 @@ static int TSS_authhmac(unsigned char *d
 				  paramdigest, TPM_NONCE_SIZE, h1,
 				  TPM_NONCE_SIZE, h2, 1, &c, 0, 0);
 out:
-	kfree(sdesc);
+	kzfree(sdesc);
 	return ret;
 }
 

@@ -245,7 +245,7 @@ static int TSS_checkhmac1(unsigned char
 	if (memcmp(testhmac, authdata, SHA1_DIGEST_SIZE))
 		ret = -EINVAL;
 out:
-	kfree(sdesc);
+	kzfree(sdesc);
 	return ret;
 }
 

@@ -346,7 +346,7 @@ static int TSS_checkhmac2(unsigned char
 	if (memcmp(testhmac2, authdata2, SHA1_DIGEST_SIZE))
 		ret = -EINVAL;
 out:
-	kfree(sdesc);
+	kzfree(sdesc);
 	return ret;
 }
 

@@ -563,7 +563,7 @@ static int tpm_seal(struct tpm_buf *tb,
 		*bloblen = storedsize;
 	}
 out:
-	kfree(td);
+	kzfree(td);
 	return ret;
 }
 

@@ -677,7 +677,7 @@ static int key_seal(struct trusted_key_p
 	if (ret < 0)
 		pr_info("trusted_key: srkseal failed (%d)\n", ret);
 
-	kfree(tb);
+	kzfree(tb);
 	return ret;
 }
 

@@ -702,7 +702,7 @@ static int key_unseal(struct trusted_key
 		/* pull migratable flag out of sealed key */
 		p->migratable = p->key[--p->key_len];
 
-	kfree(tb);
+	kzfree(tb);
 	return ret;
 }
 

@@ -961,12 +961,12 @@ static int trusted_instantiate(struct ke
 	if (!ret && options->pcrlock)
 		ret = pcrlock(options->pcrlock);
 out:
-	kfree(datablob);
-	kfree(options);
+	kzfree(datablob);
+	kzfree(options);
 	if (!ret)
 		rcu_assign_keypointer(key, payload);
 	else
-		kfree(payload);
+		kzfree(payload);
 	return ret;
 }
 

@@ -975,8 +975,7 @@ static void trusted_rcu_free(struct rcu_
 	struct trusted_key_payload *p;
 
 	p = container_of(rcu, struct trusted_key_payload, rcu);
-	memset(p->key, 0, p->key_len);
-	kfree(p);
+	kzfree(p);
 }
 
 /*

@@ -1018,9 +1017,10 @@ static int trusted_update(struct key *ke
 	ret = datablob_parse(datablob, new_p, new_o);
 	if (ret != Opt_update) {
 		ret = -EINVAL;
-		kfree(new_p);
+		kzfree(new_p);
 		goto out;
 	}
+
 	/* copy old key values, and reseal with new pcrs */
 	new_p->migratable = p->migratable;
 	new_p->key_len = p->key_len;

@@ -1031,22 +1031,22 @@ static int trusted_update(struct key *ke
 	ret = key_seal(new_p, new_o);
 	if (ret < 0) {
 		pr_info("trusted_key: key_seal failed (%d)\n", ret);
-		kfree(new_p);
+		kzfree(new_p);
 		goto out;
 	}
 	if (new_o->pcrlock) {
 		ret = pcrlock(new_o->pcrlock);
 		if (ret < 0) {
 			pr_info("trusted_key: pcrlock failed (%d)\n", ret);
-			kfree(new_p);
+			kzfree(new_p);
 			goto out;
 		}
 	}
 	rcu_assign_keypointer(key, new_p);
 	call_rcu(&p->rcu, trusted_rcu_free);
 out:
-	kfree(datablob);
-	kfree(new_o);
+	kzfree(datablob);
+	kzfree(new_o);
 	return ret;
 }
 

@@ -1075,24 +1075,19 @@ static long trusted_read(const struct ke
 	for (i = 0; i < p->blob_len; i++)
 		bufp = hex_byte_pack(bufp, p->blob[i]);
 	if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) {
-		kfree(ascii_buf);
+		kzfree(ascii_buf);
 		return -EFAULT;
 	}
-	kfree(ascii_buf);
+	kzfree(ascii_buf);
 	return 2 * p->blob_len;
 }
 
 /*
- * trusted_destroy - before freeing the key, clear the decrypted data
+ * trusted_destroy - clear and free the key's payload
  */
 static void trusted_destroy(struct key *key)
 {
-	struct trusted_key_payload *p = key->payload.data;
-
-	if (!p)
-		return;
-	memset(p->key, 0, p->key_len);
-	kfree(key->payload.data);
+	kzfree(key->payload.data);
 }
 
 struct key_type key_type_trusted = {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit a3c812f7cfd80cf51e8f5b7034f7418f6beb56c1 upstream.

When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read().

We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type.

---
 security/keys/trusted.c |   23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

@@ -1065,20 +1065,21 @@ static long trusted_read(const struct ke
 	p = rcu_dereference_key(key);
 	if (!p)
 		return -EINVAL;
-	if (!buffer || buflen <= 0)
-		return 2 * p->blob_len;
-	ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL);
-	if (!ascii_buf)
-		return -ENOMEM;
 
-	bufp = ascii_buf;
-	for (i = 0; i < p->blob_len; i++)
-		bufp = hex_byte_pack(bufp, p->blob[i]);
-	if ((copy_to_user(buffer, ascii_buf, 2 * p->blob_len)) != 0) {
+	if (buffer && buflen >= 2 * p->blob_len) {
+		ascii_buf = kmalloc(2 * p->blob_len, GFP_KERNEL);
+		if (!ascii_buf)
+			return -ENOMEM;
+
+		bufp = ascii_buf;
+		for (i = 0; i < p->blob_len; i++)
+			bufp = hex_byte_pack(bufp, p->blob[i]);
+		if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) {
+			kzfree(ascii_buf);
+			return -EFAULT;
+		}
 		kzfree(ascii_buf);
-		return -EFAULT;
 	}
-	kzfree(ascii_buf);
 	return 2 * p->blob_len;
 }
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrey Ryabinin <[email protected]>

commit d041b557792c85677f17e08eee535eafbd6b9aa2 upstream.

struct sha1_ctx_mgr allocated in sha1_mb_mod_init() via kzalloc() and later passed in sha1_mb_flusher_mgr_flush_avx2() function where instructions vmovdqa used to access the struct. vmovdqa requires 16-bytes aligned argument, but nothing guarantees that struct sha1_ctx_mgr will have that alignment. Unaligned vmovdqa will generate GP fault.

Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment requirements.

---
 arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

@@ -174,8 +174,8 @@ LABEL skip_ %I
 .endr
 
 	# Find min length
-	vmovdqa _lens+0*16(state), %xmm0
-	vmovdqa _lens+1*16(state), %xmm1
+	vmovdqu _lens+0*16(state), %xmm0
+	vmovdqu _lens+1*16(state), %xmm1
 
 	vpminud %xmm1, %xmm0, %xmm2     # xmm2 has {D,C,B,A}
 	vpalignr $8, %xmm2, %xmm3, %xmm3   # xmm3 has {x,x,D,C}

@@ -195,8 +195,8 @@ LABEL skip_ %I
 	vpsubd  %xmm2, %xmm0, %xmm0
 	vpsubd  %xmm2, %xmm1, %xmm1
 
-	vmovdqa %xmm0, _lens+0*16(state)
-	vmovdqa %xmm1, _lens+1*16(state)
+	vmovdqu %xmm0, _lens+0*16(state)
+	vmovdqu %xmm1, _lens+1*16(state)
 
 	# "state" and "args" are the same address, arg1
 	# len is arg2

@@ -260,8 +260,8 @@ ENTRY(sha1_mb_mgr_get_comp_job_avx2)
 	jc      .return_null
 
 	# Find min length
-	vmovdqa _lens(state), %xmm0
-	vmovdqa _lens+1*16(state), %xmm1
+	vmovdqu _lens(state), %xmm0
+	vmovdqu _lens+1*16(state), %xmm1
 
 	vpminud %xmm1, %xmm0, %xmm2        # xmm2 has {D,C,B,A}
 	vpalignr $8, %xmm2, %xmm3, %xmm3   # xmm3 has {x,x,D,C}

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit 624f5ab8720b3371367327a822c267699c1823b8 upstream.

syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y:

keyctl add pkcs7_test desc '' @s

The bug is that if the data buffer is empty, an integer underflow occurs in the following check:

if (unlikely(dp >= datalen - 1))
goto data_overrun_error;

This results in the NULL data pointer being dereferenced.

Fix it by checking for 'datalen - dp < 2' instead.

Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread.

The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not.

The bug report was:

    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0
    Oops: 0000 [#1] SMP
    Modules linked in:
    CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
    task: ffff9b6b3798c040 task.stack: ffff9b6b37970000
    RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
    RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c
    RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0
    RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
    R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
    FS:  00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0
    Call Trace:
     pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139
     verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216
     pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63
     key_create_or_update+0x180/0x530 security/keys/key.c:855
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x4585c9
    RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9
    RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000
    RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae
    R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000
    Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff
    RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78
    CR2: 0000000000000000

---
 lib/asn1_decoder.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -220,7 +220,7 @@ next_op:
 		hdr = 2;
 
 		/* Extract a tag from the data */
-		if (unlikely(dp >= datalen - 1))
+		if (unlikely(datalen - dp < 2))
 			goto data_overrun_error;
 		tag = data[dp++];
 		if (unlikely((tag & 0x1f) == ASN1_LONG_TAG))

@@ -266,7 +266,7 @@ next_op:
 				int n = len - 0x80;
 				if (unlikely(n > 2))
 					goto length_too_long;
-				if (unlikely(dp >= datalen - n))
+				if (unlikely(n > datalen - dp))
 					goto data_overrun_error;
 				hdr += n;
 				for (len = 0; n > 0; n--) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Rutland <[email protected]>

commit b9dd05c7002ee0ca8b676428b2268c26399b5e31 upstream.

When CONFIG_DEBUG_USER is enabled, it's possible for a user to deliberately trigger dump_instr() with a chosen kernel address.

Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory.

So that we can use the same code to dump user instructions and kernel instructions, the common dumping code is factored out to __dump_instr(), with the fs manipulated appropriately in dump_instr() around calls to this.

---
 arch/arm/kernel/traps.c |   28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

@@ -132,30 +132,26 @@ static void dump_mem(const char *lvl, co
 	set_fs(fs);
 }
 
-static void dump_instr(const char *lvl, struct pt_regs *regs)
+static void __dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
-	mm_segment_t fs;
 	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
+	 * Note that we now dump the code first, just in case the backtrace
+	 * kills us.
 	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
 
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
 		if (thumb)
-			bad = __get_user(val, &((u16 *)addr)[i]);
+			bad = get_user(val, &((u16 *)addr)[i]);
 		else
-			bad = __get_user(val, &((u32 *)addr)[i]);
+			bad = get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",

@@ -166,8 +162,20 @@ static void dump_instr(const char *lvl,
 		}
 	}
 	printk("%sCode: %s\n", lvl, str);
+}
 
-	set_fs(fs);
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+	mm_segment_t fs;
+
+	if (!user_mode(regs)) {
+		fs = get_fs();
+		set_fs(KERNEL_DS);
+		__dump_instr(lvl, regs);
+		set_fs(fs);
+	} else {
+		__dump_instr(lvl, regs);
+	}
 }
 
 #ifdef CONFIG_ARM_UNWIND

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 132d358b183ac6ad8b3fea32ad5e0663456d18d1 upstream.

The SYSEX event delivery in OSS sequencer emulation assumed that the event is encoded in the variable-length data with the straight buffering. This was the normal behavior in the past, but during the development, the chained buffers were introduced for carrying more data, while the OSS code was left intact. As a result, when a SYSEX event with the chained buffer data is passed to OSS sequencer port, it may end up with the wrong memory access, as if it were having a too large buffer.

This patch addresses the bug, by applying the buffer data expansion by the generic snd_seq_dump_var_event() helper function.

---
 sound/core/seq/oss/seq_oss_midi.c  |    4 +---
 sound/core/seq/oss/seq_oss_readq.c |   29 +++++++++++++++++++++++++++++
 sound/core/seq/oss/seq_oss_readq.h |    2 ++
 3 files changed, 32 insertions(+), 3 deletions(-)

@@ -615,9 +615,7 @@ send_midi_event(struct seq_oss_devinfo *
 	if (!dp->timer->running)
 		len = snd_seq_oss_timer_start(dp->timer);
 	if (ev->type == SNDRV_SEQ_EVENT_SYSEX) {
-		if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
-			snd_seq_oss_readq_puts(dp->readq, mdev->seq_device,
-					       ev->data.ext.ptr, ev->data.ext.len);
+		snd_seq_oss_readq_sysex(dp->readq, mdev->seq_device, ev);
 	} else {
 		len = snd_midi_event_decode(mdev->coder, msg, sizeof(msg), ev);
 		if (len > 0)

@@ -120,6 +120,35 @@ snd_seq_oss_readq_puts(struct seq_oss_re
 }
 
 /*
+ * put MIDI sysex bytes; the event buffer may be chained, thus it has
+ * to be expanded via snd_seq_dump_var_event().
+ */
+struct readq_sysex_ctx {
+	struct seq_oss_readq *readq;
+	int dev;
+};
+
+static int readq_dump_sysex(void *ptr, void *buf, int count)
+{
+	struct readq_sysex_ctx *ctx = ptr;
+
+	return snd_seq_oss_readq_puts(ctx->readq, ctx->dev, buf, count);
+}
+
+int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev,
+			    struct snd_seq_event *ev)
+{
+	struct readq_sysex_ctx ctx = {
+		.readq = q,
+		.dev = dev
+	};
+
+	if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
+		return 0;
+	return snd_seq_dump_var_event(ev, readq_dump_sysex, &ctx);
+}
+
+/*
  * copy an event to input queue:
  * return zero if enqueued
  */

@@ -44,6 +44,8 @@ void snd_seq_oss_readq_delete(struct seq
 void snd_seq_oss_readq_clear(struct seq_oss_readq *readq);
 unsigned int snd_seq_oss_readq_poll(struct seq_oss_readq *readq, struct file *file, poll_table *wait);
 int snd_seq_oss_readq_puts(struct seq_oss_readq *readq, int dev, unsigned char *data, int len);
+int snd_seq_oss_readq_sysex(struct seq_oss_readq *q, int dev,
+			    struct snd_seq_event *ev);
 int snd_seq_oss_readq_put_event(struct seq_oss_readq *readq, union evrec *ev);
 int snd_seq_oss_readq_put_timestamp(struct seq_oss_readq *readq, unsigned long curt, int seq_mode);
 int snd_seq_oss_readq_pick(struct seq_oss_readq *q, union evrec *rec);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 3510c7aa069aa83a2de6dab2b41401a198317bdc upstream.

The recent fix for adding rwsem nesting annotation was using the given "hop" argument as the lock subclass key. Although the idea itself works, it may trigger a kernel warning like:

  BUG: looking up invalid subclass: 8
  ....

since the lockdep has a smaller number of subclasses (8) than we currently allow for the hops there (10).

The current definition is merely a sanity check for avoiding the too deep delivery paths, and the 8 hops are already enough. So, as a quick fix, just follow the max hops as same as the max lockdep subclasses.

---
 include/sound/seq_kernel.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -55,7 +55,8 @@ typedef union snd_seq_timestamp snd_seq_
 #define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS	200
 
 /* max delivery path length */
-#define SNDRV_SEQ_MAX_HOPS		10
+/* NOTE: this shouldn't be greater than MAX_LOCKDEP_SUBCLASSES */
+#define SNDRV_SEQ_MAX_HOPS		8
 
 /* max size of event size */
 #define SNDRV_SEQ_MAX_EVENT_LEN		0x3fffffff

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <[email protected]>

commit 77238e76b9156d28d86c1e31c00ed2960df0e4de upstream.

It seems that this is a typo error and the proper bit masking is "RT | RS" instead of "RS | RS".

This issue was detected with the help of Coccinelle.

Patchwork: https://patchwork.linux-mips.org/patch/17551/

---
 arch/mips/mm/uasm-micromips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -83,7 +83,7 @@ static struct insn insn_table_MM[] = {
 	{ insn_jr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS },
 	{ insn_lb, M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
 	{ insn_ld, 0, 0 },
-	{ insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM },
+	{ insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
 	{ insn_ll, M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM },
 	{ insn_lld, 0, 0 },
 	{ insn_lui, M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM },

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Burton <[email protected]>

commit 6a6cba1d945a7511cdfaf338526871195e420762 upstream.

The default CM target field in the GCR_BASE register is encoded with 0 meaning memory & 1 being reserved. However the definitions we use for those bits effectively get these two values backwards - likely because they were copied from the definitions for the CM regions where the target is encoded differently. This results in use setting up GCR_BASE with the reserved target value by default, rather than targeting memory as intended. Although we currently seem to get away with this it's not a great idea to rely upon.

Fix this by changing our macros to match the documentated target values.

The incorrect encoding became used as of commit 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code") in the Linux v3.15 cycle, and was likely carried forwards from older but unused code introduced by commit 39b8d5254246 ("[MIPS] Add support for MIPS CMP platform.") in the v2.6.26 cycle.

Patchwork: https://patchwork.linux-mips.org/patch/17562/

---
 arch/mips/include/asm/mips-cm.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -173,8 +173,8 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_BASE_GCRBASE_MSK			(_ULCAST_(0x1ffff) << 15)
 #define CM_GCR_BASE_CMDEFTGT_SHF		0
 #define CM_GCR_BASE_CMDEFTGT_MSK		(_ULCAST_(0x3) << 0)
-#define  CM_GCR_BASE_CMDEFTGT_DISABLED		0
-#define  CM_GCR_BASE_CMDEFTGT_MEM		1
+#define  CM_GCR_BASE_CMDEFTGT_MEM		0
+#define  CM_GCR_BASE_CMDEFTGT_RESERVED		1
 #define  CM_GCR_BASE_CMDEFTGT_IOCU0		2
 #define  CM_GCR_BASE_CMDEFTGT_IOCU1		3
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oswald Buddenhagen <[email protected]>

commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.

Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port.

Patchwork: https://patchwork.linux-mips.org/patch/17543/

---
 arch/mips/ar7/platform.c |    1 +
 1 file changed, 1 insertion(+)

@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi
 	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
 	uart_port.iotype	= UPIO_MEM32;
+	uart_port.flags		= UPF_FIXED_TYPE;
 	uart_port.regshift	= 2;
 
 	uart_port.line		= 0;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <[email protected]>

commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream.

rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here.

---
 drivers/block/rbd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2700,7 +2700,7 @@ static int rbd_img_obj_parent_read_full(
 	 * from the parent.
 	 */
 	page_count = (u32)calc_pages_for(0, length);
-	pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
+	pages = ceph_alloc_page_vector(page_count, GFP_NOIO);
 	if (IS_ERR(pages)) {
 		result = PTR_ERR(pages);
 		pages = NULL;

@@ -2827,7 +2827,7 @@ static int rbd_img_obj_exists_submit(str
 	 */
 	size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32);
 	page_count = (u32)calc_pages_for(0, size);
-	pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
+	pages = ceph_alloc_page_vector(page_count, GFP_NOIO);
 	if (IS_ERR(pages))
 		return PTR_ERR(pages);
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Borislav Petkov <[email protected]>

commit a743bbeef27b9176987ec0cb7f906ab0ab52d1da upstream.

The warning below says it all:

  BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1
  caller is __this_cpu_preempt_check
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4
  Call Trace:
   dump_stack
   check_preemption_disabled
   ? do_early_param
   __this_cpu_preempt_check
   arch_perfmon_init
   op_nmi_init
   ? alloc_pci_root_info
   oprofile_arch_init
   oprofile_init
   do_one_initcall
   ...

These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data.

---
 arch/x86/oprofile/op_model_ppro.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -212,8 +212,8 @@ static void arch_perfmon_setup_counters(
 	eax.full = cpuid_eax(0xa);
 
 	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
-	if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 &&
-		__this_cpu_read(cpu_info.x86_model) == 15) {
+	if (eax.split.version_id == 0 && boot_cpu_data.x86 == 6 &&
+	    boot_cpu_data.x86_model == 15) {
 		eax.split.version_id = 2;
 		eax.split.num_counters = 2;
 		eax.split.bit_width = 40;

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Thanks for testing all of these and letting me know.

greg k-h

Build results:

	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 112 pass: 112 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter