Skip to contentSkip to conversation

configs/imx6slevk: Add new defconfig

PATCH New Fabio Estevam 3 participants 3 messages Nov 14, 2017 – Nov 22, 2017 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH v2 1/1 configs/imx6slevk: Add new defconfig

Add support for imx6slevk_defconfig that allows booting a mainline kernel and mainline U-Boot.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Use U-Boot 2017.11 and kernel 4.14

 .gitlab-ci.yml                       |  1 +
 DEVELOPERS                           |  1 +
 board/freescale/imx6slevk/readme.txt | 14 ++++++++++++++
 configs/imx6slevk_defconfig          | 26 ++++++++++++++++++++++++++
 4 files changed, 42 insertions(+)
 create mode 100644 board/freescale/imx6slevk/readme.txt
 create mode 100644 configs/imx6slevk_defconfig
.gitlab-ci.yml +1 -0
index 0dddb22..5f859fa 100644
@@ -126,6 +126,7 @@ imx23evk_defconfig: *defconfig
 imx6-sabreauto_defconfig: *defconfig
 imx6-sabresd_defconfig: *defconfig
 imx6-sabresd_qt5_defconfig: *defconfig
+imx6slevk_defconfig: *defconfig
 imx6ulpico_defconfig: *defconfig
 imx7dpico_defconfig: *defconfig
 lego_ev3_defconfig: *defconfig
DEVELOPERS +1 -0
index 37b7dfe..ad481f2 100644
@@ -577,6 +577,7 @@ N:	Fabio Estevam <[email protected]>
 F:	board/warp7/
 F:	configs/freescale_imx*
 F:	configs/imx6-sabresd*
+F:	configs/imx6slevk_defconfig
 F:	configs/imx6ulpico_defconfig
 F:	configs/mx6cubox_defconfig
 F:	configs/mx6sx_udoo_neo_defconfig
board/freescale/imx6slevk/readme.txt new file +14 -0
new file mode 100644
index 0000000..424380e
@@ -0,0 +1,14 @@
+NXP i.MX6SL EVK board
+---------------------
+
+To build a minimal support for this board:
+
+$ make imx6slevk_defconfig
+$ make
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be flashed into the SD card:
+
+$ sudo dd if=output/images/sdcard.img of=/dev/<sd-card-device>; sync
+
+Then insert the SD card into the SD2 slot and boot the board.
configs/imx6slevk_defconfig new file +26 -0
new file mode 100644
index 0000000..be4b42e
@@ -0,0 +1,26 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_FPU_VFPV3=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6slevk"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sl-evk"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+# required tools to create the SD card image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.7.4
reviewer
#1 lore raw

PATCH v2 1/1 configs/imx6slevk: Add new defconfig

Quoted 7 lines · Fabio Estevam

Add support for imx6slevk_defconfig that allows booting a mainline kernel and mainline U-Boot.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Use U-Boot 2017.11 and kernel 4.14

A gentle ping.

Could this one be applied to the 'next' branch?

Thanks

Applied
#2 lore raw

PATCH v2 1/1 configs/imx6slevk: Add new defconfig

In reply to Fabio Estevam

Hello,

Quoted 7 lines · Fabio Estevam

Add support for imx6slevk_defconfig that allows booting a mainline kernel and mainline U-Boot.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Use U-Boot 2017.11 and kernel 4.14

Applied to next, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com