Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs

index aa71ab52fd76..6346cc326cec 100644
@@ -3478,6 +3478,16 @@ M:	Dave Goodell <[email protected]>
 S:	Supported
 F:	drivers/infiniband/hw/usnic/
 
+CIRRUS LOGIC MADERA CODEC DRIVERS
+M:	Charles Keepax <[email protected]>
+M:	Richard Fitzgerald <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+L:	[email protected]
+T:	git https://github.com/CirrusLogic/linux-drivers.git
+W:	https://github.com/CirrusLogic/linux-drivers/wiki
+S:	Supported
+F:	include/linux/mfd/madera/*
+
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <[email protected]>
 L:	[email protected]

new file mode 100644
index 000000000000..db3266088386
@@ -0,0 +1,102 @@
+Cirrus Logic Madera class audio codecs Multi-Functional Device
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+See also the child driver bindings in:
+bindings/pinctrl/cirrus,madera-pinctrl.txt
+bindings/regulator/arizona-regulator.txt
+bindings/sound/madera.txt
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l35"
+        "cirrus,cs47l85"
+        "cirrus,cs47l90"
+        "cirrus,cs47l91"
+        "cirrus,wm1840"
+
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - DCVDD-supply : Power supply for the device as defined in
+    bindings/regulator/regulator.txt
+    Mandatory on CS47L35, CS47L90, CS47L91
+    Optional on CS47L85, WM1840
+
+  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
+    Power supplies for the device
+
+  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
+    (CS47L85, CS47L90, CS47L91, WM1840)
+
+  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
+    (CS47L85, WM1840)
+
+  - SPKVDD-supply : Power supply for the device
+    (CS47L35)
+
+  - interrupt-controller : Indicates that this device is an interrupt controller
+
+  - #interrupt-cells: the number of cells to describe an IRQ, must be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    bindings/interrupt-controller/interrupts.txt
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+
+  - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
+    is reserved for future use and must be zero
+
+  - interrupt-parent : The parent interrupt controller.
+
+  - interrupts : The interrupt line the /IRQ signal for the device is
+    connected to.
+
+Optional properties:
+
+  - MICVDD-supply : Power supply, only need to be specified if
+    powered externally
+
+  - reset-gpios : One entry specifying the GPIO controlling /RESET.
+    As defined in bindings/gpio.txt.
+    Although optional, it is strongly recommended to use a hardware reset
+
+  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
+    (all codecs)
+
+    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
+    (all except CS47L85, WM1840)
+
+    The following following additional property is supported for the generator
+    nodes:
+      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
+        capacitors attached.
+
+Optional child nodes:
+    micvdd : Node containing initialization data for the micvdd regulator
+    See bindings/regulator/arizona-regulator.txt
+
+    ldo1 : Node containing initialization data for the LDO1 regulator
+    See bindings/regulator/arizona-regulator.txt
+    (cs47l85, wm1840)
+
+Example:
+
+cs47l85@0 {
+	compatible = "cirrus,cs47l85";
+	reg = <0>;
+
+	reset-gpios = <&gpio 0>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	interrupts = <&host_irq1>;
+	interrupt-parent = <&gic>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};

index 6346cc326cec..510ca722cc27 100644
@@ -3486,7 +3486,10 @@ L:	[email protected]
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
+F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	include/linux/mfd/madera/*
+F:	drivers/mfd/madera*
+F:	drivers/mfd/cs47l*
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <[email protected]>

index 1d20a800e967..7c47dd79cbaa 100644
@@ -222,6 +222,33 @@ config MFD_CROS_EC_SPI
 	  response time cannot be guaranteed, we support ignoring
 	  'pre-amble' bytes before the response actually starts.
 
+config MFD_MADERA
+	bool
+	select MFD_CORE
+	select REGMAP
+	select REGMAP_IRQ
+	select MADERA_IRQ
+
+config MFD_MADERA_I2C
+	bool "Cirrus Logic Madera codecs with I2C"
+	select MFD_MADERA
+	select REGMAP_I2C
+	depends on I2C
+	depends on PINCTRL
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via I2C.
+
+config MFD_MADERA_SPI
+	bool "Cirrus Logic Madera codecs with SPI"
+	select MFD_MADERA
+	select REGMAP_SPI
+	depends on SPI_MASTER
+	depends on PINCTRL
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via SPI.
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM

index d9474ade32e6..bcff419deab9 100644
@@ -76,6 +76,10 @@ wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 obj-$(CONFIG_MFD_WM97xx)	+= wm97xx-core.o
 
+obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
+obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
+obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
+
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o

index 7c47dd79cbaa..0cfdf14b2925 100644
@@ -249,6 +249,13 @@ config MFD_MADERA_SPI
 	  Support for the Cirrus Logic Madera platform audio SoC
 	  core functionality controlled via SPI.
 
+config MFD_CS47L35
+	bool "Cirrus Logic CS47L35"
+	select PINCTRL_CS47L35
+	depends on MFD_MADERA
+	help
+	  Support for Cirrus Logic CS47L35 Smart Codec
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM

index bcff419deab9..024a297ff1e2 100644
@@ -77,6 +77,9 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 obj-$(CONFIG_MFD_WM97xx)	+= wm97xx-core.o
 
 obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
+ifeq ($(CONFIG_MFD_CS47L35),y)
+obj-$(CONFIG_MFD_MADERA)	+= cs47l35-tables.o
+endif
 obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
 obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
 

index 0cfdf14b2925..aac89cf4d827 100644
@@ -256,6 +256,13 @@ config MFD_CS47L35
 	help
 	  Support for Cirrus Logic CS47L35 Smart Codec
 
+config MFD_CS47L85
+	bool "Cirrus Logic CS47L85"
+	select PINCTRL_CS47L85
+	depends on MFD_MADERA
+	help
+	  Support for Cirrus Logic CS47L85 Smart Codec
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM

index 024a297ff1e2..09d829f938a6 100644
@@ -80,6 +80,9 @@ obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
 ifeq ($(CONFIG_MFD_CS47L35),y)
 obj-$(CONFIG_MFD_MADERA)	+= cs47l35-tables.o
 endif
+ifeq ($(CONFIG_MFD_CS47L85),y)
+obj-$(CONFIG_MFD_MADERA)	+= cs47l85-tables.o
+endif
 obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
 obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
 

index aac89cf4d827..aad818614b3d 100644
@@ -263,6 +263,13 @@ config MFD_CS47L85
 	help
 	  Support for Cirrus Logic CS47L85 Smart Codec
 
+config MFD_CS47L90
+	bool "Cirrus Logic CS47L90/91"
+	select PINCTRL_CS47L90
+	depends on MFD_MADERA
+	help
+	  Support for Cirrus Logic CS47L90 and CS47L91 Smart Codecs
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM

index 09d829f938a6..2c07de3ad575 100644
@@ -83,6 +83,9 @@ endif
 ifeq ($(CONFIG_MFD_CS47L85),y)
 obj-$(CONFIG_MFD_MADERA)	+= cs47l85-tables.o
 endif
+ifeq ($(CONFIG_MFD_CS47L90),y)
+obj-$(CONFIG_MFD_MADERA)	+= cs47l90-tables.o
+endif
 obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
 obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
 

index 443564d7784f..91b00f9f06d5 100644
@@ -5,7 +5,8 @@ of analogue I/O.
 
 This document lists regulator specific bindings, see the primary binding
 document:
-  ../mfd/arizona.txt
+  For Wolfson Arizona codecs: ../mfd/arizona.txt
+  For Cirrus Logic Madera codecs: ../mfd/madera.txt
 
 Optional properties:
   - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA

index 96cd55f9e3c5..53639a6bd888 100644
@@ -134,11 +134,12 @@ config REGULATOR_ARIZONA_LDO1
 	  devices.
 
 config REGULATOR_ARIZONA_MICSUPP
-	tristate "Wolfson Arizona class devices MICSUPP"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the MICSUPP regulators found on Wolfson Arizona class
+	  Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Arizona codecs
 	  devices.
 
 config REGULATOR_AS3711

index 53639a6bd888..3db4f994aea8 100644
@@ -126,12 +126,12 @@ config REGULATOR_AB8500
 	  signal AB8500 PMIC
 
 config REGULATOR_ARIZONA_LDO1
-	tristate "Wolfson Arizona class devices LDO1"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the LDO1 regulators found on Wolfson Arizona class
-	  devices.
+	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
 	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"

index 510ca722cc27..f0ae363fbcee 100644
@@ -3487,7 +3487,9 @@ T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
 F:	Documentation/devicetree/bindings/mfd/madera.txt
+F:	include/linux/irqchip/irq-madera*
 F:	include/linux/mfd/madera/*
+F:	drivers/irqchip/irq-madera*
 F:	drivers/mfd/madera*
 F:	drivers/mfd/cs47l*
 

index 53380bd72ea4..961e90558433 100644
@@ -137,6 +137,9 @@ config IMGPDC_IRQ
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
+config MADERA_IRQ
+	bool
+
 config IRQ_MIPS_CPU
 	bool
 	select GENERIC_IRQ_CHIP

index dae7282bfdef..88e41fa81118 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
 obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
+obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
 obj-$(CONFIG_CLPS711X_IRQCHIP)		+= irq-clps711x.o
 obj-$(CONFIG_OMPIC)			+= irq-ompic.o
 obj-$(CONFIG_OR1K_PIC)			+= irq-or1k-pic.o

new file mode 100644
index 000000000000..b0e36cf0d289
@@ -0,0 +1,99 @@
+Cirrus Logic Madera class audio codecs pinctrl driver
+
+The Cirrus Logic Madera codecs provide a number of GPIO functions for
+interfacing to external hardware and to provide logic outputs to other devices.
+Certain groups of GPIO pins also have an alternate function, normally as an
+audio interface.
+
+The set of available GPIOs, functions and alternate function groups differs
+between codecs so refer to the datasheet for the codec for further information
+on what is supported on that device.
+
+The properties for this driver exist within the parent MFD driver node.
+
+See also
+  the core bindings for the parent MFD driver:
+    Documentation/devicetree/bindings/mfd/madera.txt
+
+  the generic pinmix bindings:
+    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Required properties of parent mfd node:
+  - pinctrl-names : must be "default"
+  - pinctrl-0 : a phandle to the node containing the subnodes containing default
+      configurations
+
+Required subnodes:
+  One subnode is required to contain the default settings. It contains an
+  arbitrary number of configuration subnodes, one for each group or pin
+  configuration you want to apply as a default.
+
+Required properties of configuration subnodes:
+  - groups : name of one pin group to configure. One of:
+	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
+	dmic4, dmic5, dmic6,
+	gpio1, gpio2, ..., gpio40
+    The gpioN groups select the single pin of this name for configuration
+
+Optional properties of configuration subnodes:
+  Any configuration option not explicitly listed in the dts will be left at
+  chip default setting.
+
+  - function : name of function to assign to this group. One of:
+	aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2,
+	dmic3, dmic4, dmic5, dmic6,
+	io, dsp-gpio, irq1, irq2,
+	fll1-clk, fll1-lock, fll2-clk, fll2-lock, fll3-clk, fll3-lock,
+	fllao-clk, fllao-lock,
+	opclk, opclk-async, pwm1, pwm2, spdif,
+	asrc1-in1-lock, asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+	spkl-short-circuit, spkr-short-circuit, spk-shutdown,
+	spk-overheat-shutdown, spk-overheat-warn,
+	timer1-sts, timer2-sts, timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+	timer7-sts, timer8-sts,
+	log1-fifo-ne, log2-fifo-ne, log3-fifo-ne, log4-fifo-ne, log5-fifo-ne,
+	log6-fifo-ne, log7-fifo-ne, log8-fifo-ne,
+
+  - bias-disable : disable pull-up and pull-down
+  - bias-bus-hold : enable buskeeper
+  - bias-pull-up : output is pulled-up
+  - bias-pull-down : output is pulled-down
+  - drive-push-pull : CMOS output
+  - drive-open-drain : open-drain output
+  - drive-strength : drive strength in mA. Valid values are 4 or 8
+  - input-schmitt-enable : enable schmitt-trigger mode
+  - input-schmitt-disable : disable schmitt-trigger mode
+  - input-debounce : A value of 0 disables debounce, a value !=0 enables
+	debounce
+  - output-low : set the pin to output mode with low level
+  - output-high : set the pin to output mode with high level
+
+Example:
+
+cs47l85@0 {
+	compatible = "cirrus,cs47l85";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cs47l85_defaults>;
+
+	cs47l85_defaults: cs47l85-gpio-defaults {
+		aif1 {
+			groups = "aif1";
+			function = "aif1";
+			bias-bus-hold;
+		};
+
+		aif2 {
+			groups = "aif2";
+			function = "aif2";
+			bias-bus-hold;
+		};
+
+		opclk {
+			groups = "gpio1";
+			function = "opclk";
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+	};
+};

index f0ae363fbcee..2c6772f81d88 100644
@@ -3487,11 +3487,13 @@ T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
 F:	Documentation/devicetree/bindings/mfd/madera.txt
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
 F:	include/linux/irqchip/irq-madera*
 F:	include/linux/mfd/madera/*
 F:	drivers/irqchip/irq-madera*
 F:	drivers/mfd/madera*
 F:	drivers/mfd/cs47l*
+F:	drivers/pinctrl/cirrus/*
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <[email protected]>

index 4571cc098b76..fba6986772c2 100644
@@ -365,6 +365,7 @@ source "drivers/pinctrl/vt8500/Kconfig"
 source "drivers/pinctrl/mediatek/Kconfig"
 source "drivers/pinctrl/zte/Kconfig"
 source "drivers/pinctrl/meson/Kconfig"
+source "drivers/pinctrl/cirrus/Kconfig"
 
 config PINCTRL_XWAY
 	bool

index d0d4844f8022..d3b932695e68 100644
@@ -66,3 +66,4 @@ obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
 obj-$(CONFIG_PINCTRL_MTK)	+= mediatek/
 obj-$(CONFIG_PINCTRL_ZX)	+= zte/
+obj-y				+= cirrus/

new file mode 100644
index 000000000000..093527eaf2eb
@@ -0,0 +1,15 @@
+config PINCTRL_MADERA
+	bool
+	select PINMUX
+	select GENERIC_PINCONF
+	default y if MFD_MADERA=y
+
+config PINCTRL_CS47L35
+	bool
+
+config PINCTRL_CS47L85
+	bool
+
+config PINCTRL_CS47L90
+	bool
+

new file mode 100644
index 000000000000..b34473c5c53f
@@ -0,0 +1,11 @@
+# Cirrus Logic pinctrl drivers
+obj-$(CONFIG_PINCTRL_MADERA)	+= pinctrl-madera.o
+ifeq ($(CONFIG_PINCTRL_CS47L35),y)
+obj-$(CONFIG_PINCTRL_MADERA)	+= pinctrl-cs47l35.o
+endif
+ifeq ($(CONFIG_PINCTRL_CS47L85),y)
+obj-$(CONFIG_PINCTRL_MADERA)	+= pinctrl-cs47l85.o
+endif
+ifeq ($(CONFIG_PINCTRL_CS47L90),y)
+obj-$(CONFIG_PINCTRL_MADERA)	+= pinctrl-cs47l90.o
+endif

index 2c6772f81d88..7f3f2de4cc44 100644
@@ -3490,6 +3490,7 @@ F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
 F:	include/linux/irqchip/irq-madera*
 F:	include/linux/mfd/madera/*
+F:	drivers/gpio/gpio-madera*
 F:	drivers/irqchip/irq-madera*
 F:	drivers/mfd/madera*
 F:	drivers/mfd/cs47l*

index d6a8e851ad13..95e4bbcf9bf7 100644
@@ -993,6 +993,12 @@ config GPIO_LP87565
 	  This driver can also be built as a module. If so, the module will be
 	  called gpio-lp87565.
 
+config GPIO_MADERA
+	bool "Cirrus Logic Madera class codecs"
+	depends on PINCTRL_MADERA
+	help
+	  Support for GPIOs on Cirrus Logic Madera class codecs.
+
 config GPIO_MAX77620
 	tristate "GPIO support for PMIC MAX77620 and MAX20024"
 	depends on MFD_MAX77620

index 4bc24febb889..765125eb7d4c 100644
@@ -70,6 +70,7 @@ obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LP873X)	+= gpio-lp873x.o
 obj-$(CONFIG_GPIO_LP87565)	+= gpio-lp87565.o
 obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
+obj-$(CONFIG_GPIO_MADERA)	+= gpio-madera.o
 obj-$(CONFIG_GPIO_MAX3191X)	+= gpio-max3191x.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
 obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o

new file mode 100644
index 000000000000..1114fcf1aa4c
@@ -0,0 +1,67 @@
+Cirrus Logic Madera class audio codecs
+
+This describes audio configuration bindings for these codecs.
+
+See also the core bindings for the parent MFD driver:
+See Documentation/devicetree/bindings/mfd/madera.txt
+
+and defines for values used in these bindings:
+include/dt-bindings/sound/madera.h
+
+These properties are all contained in the parent MFD node.
+
+Optional properties:
+  - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally
+    connected to DMICs on each input, one cell per input.
+    <IN1 IN2 IN3 ...>
+    A value of 0 indicates MICVDD and is the default, other values depend on the
+    codec:
+    For CS47L35 one of the CS47L35_DMIC_REF_xxx values
+    For all other codecs one of the MADERA_DMIC_REF_xxx values
+    Also see the datasheet for a description of the INn_DMIC_SUP field.
+
+  - cirrus,inmode : A list of input mode settings for each input. A maximum of
+    16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR.
+    For non-muxed inputs the first two cells for that input set the mode for
+    the left and right channel and the second two cells must be 0.
+    For muxed inputs the first two cells for that input set the mode of the
+    left and right A inputs and the second two cells set the mode of the left
+    and right B inputs.
+    Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter
+    than the number of inputs the unspecified inputs default to
+    MADERA_INMODE_DIFF.
+
+  - cirrus,out-mono : Mono bit for each output, must contain six cells if
+    specified. A non-zero value indicates the corresponding output is mono.
+
+  - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks
+    will be generated for. Useful when clock master for systems where the I2S
+    bus has multiple data lines.
+    One cell for each AIF, use a value of zero for AIFs that should be handled
+    normally.
+
+  - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells
+    (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+    description of this value.
+    The second cell is ignored for codecs that do not have OUT6.
+
+  - cirrus,pdm-mute : PDM mute format, must contain 2 cells
+    (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a
+    description of this value.
+    The second cell is ignored for codecs that do not have OUT6.
+
+Example:
+
+cs47l35@0 {
+	compatible = "cirrus,cs47l35";
+
+	cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>;
+	cirrus,inmode = <
+		MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */
+		MADERA_INMODE_SE   MADERA_INMODE_SE   /* IN1B single-ended */
+		MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */
+		0 0 	/* not used on this codec */
+	>;
+	cirrus,out-mono = <0 0 0 0 0 0>;
+	cirrus,max-channels-clocked = <2 0 0>;
+};

index 7f3f2de4cc44..a336fde993f4 100644
@@ -3488,6 +3488,7 @@ W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
 F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+F:	include/dt-bindings/sound/madera*
 F:	include/linux/irqchip/irq-madera*
 F:	include/linux/mfd/madera/*
 F:	drivers/gpio/gpio-madera*

index a336fde993f4..0c8f3a9a90b4 100644
@@ -3488,14 +3488,18 @@ W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
 F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
+F:	Documentation/devicetree/bindings/sound/madera.txt
 F:	include/dt-bindings/sound/madera*
 F:	include/linux/irqchip/irq-madera*
 F:	include/linux/mfd/madera/*
+F:	include/sound/madera*
 F:	drivers/gpio/gpio-madera*
 F:	drivers/irqchip/irq-madera*
 F:	drivers/mfd/madera*
 F:	drivers/mfd/cs47l*
 F:	drivers/pinctrl/cirrus/*
+F:	sound/soc/codecs/cs47l*
+F:	sound/soc/codecs/madera*
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <[email protected]>

index a42ddbc93f3d..0462c4a79b28 100644
@@ -252,10 +252,12 @@ config SND_SOC_WM_HUBS
 config SND_SOC_WM_ADSP
 	tristate
 	select SND_SOC_COMPRESS
+	default y if SND_SOC_MADERA=y
 	default y if SND_SOC_CS47L24=y
 	default y if SND_SOC_WM5102=y
 	default y if SND_SOC_WM5110=y
 	default y if SND_SOC_WM2200=y
+	default m if SND_SOC_MADERA=m
 	default m if SND_SOC_CS47L24=m
 	default m if SND_SOC_WM5102=m
 	default m if SND_SOC_WM5110=m

@@ -591,6 +593,9 @@ config SND_SOC_ISABELLE
 config SND_SOC_LM49453
 	tristate
 
+config SND_SOC_MADERA
+	tristate
+
 config SND_SOC_MAX98088
        tristate
 

index 0001069ce2a7..6c3e5b094197 100644
@@ -80,6 +80,7 @@ snd-soc-jz4740-codec-objs := jz4740.o
 snd-soc-l3-objs := l3.o
 snd-soc-lm4857-objs := lm4857.o
 snd-soc-lm49453-objs := lm49453.o
+snd-soc-madera-objs := madera.o
 snd-soc-max9768-objs := max9768.o
 snd-soc-max98088-objs := max98088.o
 snd-soc-max98090-objs := max98090.o

@@ -320,6 +321,7 @@ obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_LM4857)	+= snd-soc-lm4857.o
 obj-$(CONFIG_SND_SOC_LM49453)   += snd-soc-lm49453.o
+obj-$(CONFIG_SND_SOC_MADERA)	+= snd-soc-madera.o
 obj-$(CONFIG_SND_SOC_MAX9768)	+= snd-soc-max9768.o
 obj-$(CONFIG_SND_SOC_MAX98088)	+= snd-soc-max98088.o
 obj-$(CONFIG_SND_SOC_MAX98090)	+= snd-soc-max98090.o

index 0462c4a79b28..6e78f3dd23b8 100644
@@ -63,6 +63,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_CS43130 if I2C
 	select SND_SOC_CS4349 if I2C
 	select SND_SOC_CS47L24 if MFD_CS47L24
+	select SND_SOC_CS47L35 if MFD_CS47L35
 	select SND_SOC_CS53L30 if I2C
 	select SND_SOC_CX20442 if TTY
 	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI

@@ -504,6 +505,9 @@ config SND_SOC_CS4349
 config SND_SOC_CS47L24
 	tristate
 
+config SND_SOC_CS47L35
+	tristate
+
 # Cirrus Logic Quad-Channel ADC
 config SND_SOC_CS53L30
 	tristate "Cirrus Logic CS53L30 CODEC"

@@ -595,6 +599,8 @@ config SND_SOC_LM49453
 
 config SND_SOC_MADERA
 	tristate
+	default y if SND_SOC_CS47L35=y
+	default m if SND_SOC_CS47L35=m
 
 config SND_SOC_MAX98088
        tristate

index 6c3e5b094197..8d0b6ed5cd46 100644
@@ -57,6 +57,7 @@ snd-soc-cs42xx8-i2c-objs := cs42xx8-i2c.o
 snd-soc-cs43130-objs := cs43130.o
 snd-soc-cs4349-objs := cs4349.o
 snd-soc-cs47l24-objs := cs47l24.o
+snd-soc-cs47l35-objs := cs47l35.o
 snd-soc-cs53l30-objs := cs53l30.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o

@@ -298,6 +299,7 @@ obj-$(CONFIG_SND_SOC_CS42XX8_I2C) += snd-soc-cs42xx8-i2c.o
 obj-$(CONFIG_SND_SOC_CS43130)   += snd-soc-cs43130.o
 obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
 obj-$(CONFIG_SND_SOC_CS47L24)	+= snd-soc-cs47l24.o
+obj-$(CONFIG_SND_SOC_CS47L35)	+= snd-soc-cs47l35.o
 obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o

index 6e78f3dd23b8..164666cf3957 100644
@@ -64,6 +64,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_CS4349 if I2C
 	select SND_SOC_CS47L24 if MFD_CS47L24
 	select SND_SOC_CS47L35 if MFD_CS47L35
+	select SND_SOC_CS47L85 if MFD_CS47L85
 	select SND_SOC_CS53L30 if I2C
 	select SND_SOC_CX20442 if TTY
 	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI

@@ -508,6 +509,9 @@ config SND_SOC_CS47L24
 config SND_SOC_CS47L35
 	tristate
 
+config SND_SOC_CS47L85
+	tristate
+
 # Cirrus Logic Quad-Channel ADC
 config SND_SOC_CS53L30
 	tristate "Cirrus Logic CS53L30 CODEC"

@@ -600,7 +604,9 @@ config SND_SOC_LM49453
 config SND_SOC_MADERA
 	tristate
 	default y if SND_SOC_CS47L35=y
+	default y if SND_SOC_CS47L85=y
 	default m if SND_SOC_CS47L35=m
+	default m if SND_SOC_CS47L85=m
 
 config SND_SOC_MAX98088
        tristate

index 8d0b6ed5cd46..122f6d004b20 100644
@@ -58,6 +58,7 @@ snd-soc-cs43130-objs := cs43130.o
 snd-soc-cs4349-objs := cs4349.o
 snd-soc-cs47l24-objs := cs47l24.o
 snd-soc-cs47l35-objs := cs47l35.o
+snd-soc-cs47l85-objs := cs47l85.o
 snd-soc-cs53l30-objs := cs53l30.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o

@@ -300,6 +301,7 @@ obj-$(CONFIG_SND_SOC_CS43130)   += snd-soc-cs43130.o
 obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
 obj-$(CONFIG_SND_SOC_CS47L24)	+= snd-soc-cs47l24.o
 obj-$(CONFIG_SND_SOC_CS47L35)	+= snd-soc-cs47l35.o
+obj-$(CONFIG_SND_SOC_CS47L85)	+= snd-soc-cs47l85.o
 obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o

index 164666cf3957..5da9c109c76d 100644
@@ -65,6 +65,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_CS47L24 if MFD_CS47L24
 	select SND_SOC_CS47L35 if MFD_CS47L35
 	select SND_SOC_CS47L85 if MFD_CS47L85
+	select SND_SOC_CS47L90 if MFD_CS47L90
 	select SND_SOC_CS53L30 if I2C
 	select SND_SOC_CX20442 if TTY
 	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI

@@ -512,6 +513,9 @@ config SND_SOC_CS47L35
 config SND_SOC_CS47L85
 	tristate
 
+config SND_SOC_CS47L90
+	tristate
+
 # Cirrus Logic Quad-Channel ADC
 config SND_SOC_CS53L30
 	tristate "Cirrus Logic CS53L30 CODEC"

@@ -605,8 +609,10 @@ config SND_SOC_MADERA
 	tristate
 	default y if SND_SOC_CS47L35=y
 	default y if SND_SOC_CS47L85=y
+	default y if SND_SOC_CS47L90=y
 	default m if SND_SOC_CS47L35=m
 	default m if SND_SOC_CS47L85=m
+	default m if SND_SOC_CS47L90=m
 
 config SND_SOC_MAX98088
        tristate

index 122f6d004b20..12265d243405 100644
@@ -59,6 +59,7 @@ snd-soc-cs4349-objs := cs4349.o
 snd-soc-cs47l24-objs := cs47l24.o
 snd-soc-cs47l35-objs := cs47l35.o
 snd-soc-cs47l85-objs := cs47l85.o
+snd-soc-cs47l90-objs := cs47l90.o
 snd-soc-cs53l30-objs := cs53l30.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o

@@ -302,6 +303,7 @@ obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
 obj-$(CONFIG_SND_SOC_CS47L24)	+= snd-soc-cs47l24.o
 obj-$(CONFIG_SND_SOC_CS47L35)	+= snd-soc-cs47l35.o
 obj-$(CONFIG_SND_SOC_CS47L85)	+= snd-soc-cs47l85.o
+obj-$(CONFIG_SND_SOC_CS47L90)	+= snd-soc-cs47l90.o
 obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o