Remove assert()
Subsystems (28)
cover Remove assert()
Buildman test passed.
Masahiro Yamada (5):
Move CONFIG_PANIC_HANG to Kconfig
ARM: openrd: set CONFIG_LOGLEVEL to 2
Enable CONFIG_PANIC_HANG for boards without do_reset()
treewide: convert assert() to BUG_ON()
Remove assert()
README | 10 ---- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 + arch/arm/mach-exynos/clock.c | 4 +- arch/arm/mach-tegra/clock.c | 10 ++-- arch/arm/mach-tegra/pinmux-common.c | 80 +++++++++++++-------------- arch/arm/mach-tegra/tegra114/clock.c | 10 ++-- arch/arm/mach-tegra/tegra124/clock.c | 10 ++-- arch/arm/mach-tegra/tegra20/clock.c | 14 ++--- arch/arm/mach-tegra/tegra210/clock.c | 10 ++-- arch/arm/mach-tegra/tegra30/clock.c | 10 ++-- arch/powerpc/cpu/mpc85xx/Kconfig | 37 +++++++++++++ arch/sandbox/cpu/state.c | 4 +- arch/x86/cpu/intel_common/mrc.c | 2 +- arch/x86/lib/efi/efi.c | 2 +- arch/x86/lib/fsp/fsp_support.c | 6 +- arch/x86/lib/physmem.c | 5 +- board/freescale/qemu-ppce500/qemu-ppce500.c | 8 +-- cmd/bootefi.c | 2 +- cmd/mtdparts.c | 2 +- cmd/tpm_test.c | 28 +++++----- common/dlmalloc.c | 86 ++++++++++++++--------------- common/fdt_support.c | 2 +- common/hwconfig.c | 36 ++++++------ configs/TWR-P1025_defconfig | 1 + configs/UCP1020_SPIFLASH_defconfig | 1 + configs/UCP1020_defconfig | 1 + configs/adp-ae3xx_defconfig | 1 + configs/cl-som-imx7_defconfig | 1 + configs/evb-rk3229_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + configs/openrd_base_defconfig | 2 +- configs/openrd_client_defconfig | 2 +- configs/openrd_ultimate_defconfig | 2 +- configs/opos6uldev_defconfig | 1 + configs/qemu-ppce500_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_v7_defconfig | 1 + configs/uniphier_v8_defconfig | 1 + configs/xpedite517x_defconfig | 1 + configs/xpedite520x_defconfig | 1 + configs/xpedite537x_defconfig | 1 + configs/xpedite550x_defconfig | 1 + drivers/clk/clk-uclass.c | 2 +- drivers/clk/rockchip/clk_rk3036.c | 23 ++++---- drivers/clk/rockchip/clk_rk3188.c | 28 ++++------ drivers/clk/rockchip/clk_rk322x.c | 23 ++++---- drivers/clk/rockchip/clk_rk3288.c | 36 +++++------- drivers/clk/rockchip/clk_rk3328.c | 8 +-- drivers/clk/rockchip/clk_rk3368.c | 4 +- drivers/clk/rockchip/clk_rk3399.c | 51 +++++++---------- drivers/clk/rockchip/clk_rv1108.c | 2 +- drivers/core/device-remove.c | 8 +-- drivers/core/device.c | 2 +- drivers/core/ofnode.c | 24 ++++---- drivers/core/uclass.c | 4 +- drivers/gpio/gpio-uclass.c | 2 +- drivers/i2c/i2c-uclass.c | 2 +- drivers/input/input.c | 4 +- drivers/input/key_matrix.c | 2 +- drivers/misc/cros_ec.c | 10 ++-- drivers/misc/cros_ec_i2c.c | 4 +- drivers/mtd/nand/tegra_nand.c | 2 +- drivers/mtd/spi/sandbox.c | 4 +- drivers/net/fsl-mc/mc.c | 2 +- drivers/phy/phy-uclass.c | 2 +- drivers/power/tps6586x.c | 4 +- drivers/rtc/rtc-uclass.c | 10 ++-- drivers/sound/sound.c | 2 +- drivers/spi/exynos_spi.c | 6 +- drivers/usb/emul/sandbox_flash.c | 2 +- drivers/usb/host/usb-uclass.c | 4 +- drivers/video/stb_truetype.h | 2 +- fs/ext4/dev.c | 2 +- fs/ext4/ext4_common.c | 2 +- fs/ext4/ext4_journal.c | 2 +- fs/fat/fat.c | 2 +- include/common.h | 15 ----- include/configs/B4860QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P1023RDB.h | 2 - include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cyrus.h | 1 - include/configs/ls1012a_common.h | 1 - include/configs/ls1088a_common.h | 2 - include/configs/ls2080a_common.h | 2 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/qemu-ppce500.h | 1 - include/configs/t4qds.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 4 -- include/dm/ofnode.h | 4 +- include/efi_loader.h | 12 ++-- lib/Kconfig | 10 ++++ lib/circbuf.c | 16 +++--- lib/efi_loader/efi_boottime.c | 2 +- lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_file.c | 2 +- lib/efi_loader/efi_memory.c | 2 +- lib/fdtdec.c | 8 +-- lib/membuff.c | 4 +- lib/physmem.c | 4 +- lib/qsort.c | 2 +- lib/slre.c | 8 +-- lib/tiny-printf.c | 9 --- lib/vsprintf.c | 9 --- net/eth-uclass.c | 2 +- net/eth_legacy.c | 2 +- net/net.c | 2 +- test/command_ut.c | 30 +++++----- test/compression.c | 16 +++--- test/print_ut.c | 42 +++++++------- 131 files changed, 442 insertions(+), 491 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/5 Move CONFIG_PANIC_HANG to Kconfig
Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them.
---
README | 10 --------- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 +++ arch/powerpc/cpu/mpc85xx/Kconfig | 37 +++++++++++++++++++++++++++++++ configs/TWR-P1025_defconfig | 1 + configs/UCP1020_SPIFLASH_defconfig | 1 + configs/UCP1020_defconfig | 1 + configs/adp-ae3xx_defconfig | 1 + configs/qemu-ppce500_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_v7_defconfig | 1 + configs/uniphier_v8_defconfig | 1 + configs/xpedite517x_defconfig | 1 + configs/xpedite520x_defconfig | 1 + configs/xpedite537x_defconfig | 1 + configs/xpedite550x_defconfig | 1 + include/configs/B4860QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cyrus.h | 1 - include/configs/ls1012a_common.h | 1 - include/configs/ls1088a_common.h | 2 -- include/configs/ls2080a_common.h | 2 -- include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/qemu-ppce500.h | 1 - include/configs/t4qds.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 -- include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 4 ---- lib/Kconfig | 10 +++++++++ 49 files changed, 64 insertions(+), 48 deletions(-)
README +0 -10
@@ -2168,16 +2168,6 @@ The following options need to be configured: currently only supports clearing the memory. - Error Recovery: - CONFIG_PANIC_HANG - - Define this variable to stop the system in case of a - fatal error, so that you have to reset it manually. - This is probably NOT a good idea for an embedded - system where you want the system to reboot - automatically as fast as possible, but it may be - useful during development since you can try to debug - the conditions that lead to the situation. - CONFIG_NET_RETRY_COUNT This variable defines the number of retries for
arch/arm/cpu/armv8/fsl-layerscape/Kconfig +3 -0
@@ -7,6 +7,7 @@ config ARCH_LS1012A select SYS_FSL_ERRATUM_A010315 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG config ARCH_LS1043A bool
@@ -85,6 +86,7 @@ config ARCH_LS1088A select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F imply SCSI + imply PANIC_HANG config ARCH_LS2080A bool
@@ -123,6 +125,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A009203 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG config FSL_LSCH2 bool
arch/powerpc/cpu/mpc85xx/Kconfig +37 -0
@@ -29,6 +29,7 @@ config TARGET_B4420QDS select ARCH_B4420 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_B4860QDS bool "Support B4860QDS"
@@ -36,6 +37,7 @@ config TARGET_B4860QDS select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_BSC9131RDB bool "Support BSC9131RDB"
@@ -57,6 +59,7 @@ config TARGET_C29XPCIE select SUPPORT_SPL select SUPPORT_TPL select PHYS_64BIT + imply PANIC_HANG config TARGET_P3041DS bool "Support P3041DS"
@@ -64,6 +67,7 @@ config TARGET_P3041DS select ARCH_P3041 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P4080DS bool "Support P4080DS"
@@ -71,6 +75,7 @@ config TARGET_P4080DS select ARCH_P4080 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P5020DS bool "Support P5020DS"
@@ -78,6 +83,7 @@ config TARGET_P5020DS select ARCH_P5020 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P5040DS bool "Support P5040DS"
@@ -85,6 +91,7 @@ config TARGET_P5040DS select ARCH_P5040 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_MPC8536DS bool "Support MPC8536DS"
@@ -92,6 +99,7 @@ config TARGET_MPC8536DS # Use DDR3 controller with DDR2 DIMMs on this board select SYS_FSL_DDRC_GEN3 imply CMD_SATA + imply PANIC_HANG config TARGET_MPC8541CDS bool "Support MPC8541CDS"
@@ -100,6 +108,7 @@ config TARGET_MPC8541CDS config TARGET_MPC8544DS bool "Support MPC8544DS" select ARCH_MPC8544 + imply PANIC_HANG config TARGET_MPC8548CDS bool "Support MPC8548CDS"
@@ -123,6 +132,7 @@ config TARGET_MPC8572DS # Use DDR3 controller with DDR2 DIMMs on this board select SYS_FSL_DDRC_GEN3 imply SCSI + imply PANIC_HANG config TARGET_P1010RDB_PA bool "Support P1010RDB_PA"
@@ -132,6 +142,7 @@ config TARGET_P1010RDB_PA select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1010RDB_PB bool "Support P1010RDB_PB"
@@ -141,6 +152,7 @@ config TARGET_P1010RDB_PB select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1022DS bool "Support P1022DS"
@@ -153,6 +165,7 @@ config TARGET_P1023RDB bool "Support P1023RDB" select ARCH_P1023 imply CMD_EEPROM + imply PANIC_HANG config TARGET_P1020MBG bool "Support P1020MBG-PC"
@@ -161,6 +174,7 @@ config TARGET_P1020MBG select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020RDB_PC bool "Support P1020RDB-PC"
@@ -169,6 +183,7 @@ config TARGET_P1020RDB_PC select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020RDB_PD bool "Support P1020RDB-PD"
@@ -177,6 +192,7 @@ config TARGET_P1020RDB_PD select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020UTM bool "Support P1020UTM"
@@ -185,6 +201,7 @@ config TARGET_P1020UTM select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1021RDB bool "Support P1021RDB"
@@ -193,6 +210,7 @@ config TARGET_P1021RDB select ARCH_P1021 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1024RDB bool "Support P1024RDB"
@@ -201,6 +219,7 @@ config TARGET_P1024RDB select ARCH_P1024 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1025RDB bool "Support P1025RDB"
@@ -209,6 +228,7 @@ config TARGET_P1025RDB select ARCH_P1025 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P2020RDB bool "Support P2020RDB-PC"
@@ -217,6 +237,7 @@ config TARGET_P2020RDB select ARCH_P2020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1_TWR bool "Support p1_twr"
@@ -228,6 +249,7 @@ config TARGET_P2041RDB select BOARD_LATE_INIT if CHAIN_OF_TRUST select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_QEMU_PPCE500 bool "Support qemu-ppce500"
@@ -242,6 +264,7 @@ config TARGET_T1024QDS select PHYS_64BIT imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_T1023RDB bool "Support T1023RDB"
@@ -250,6 +273,7 @@ config TARGET_T1023RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG config TARGET_T1024RDB bool "Support T1024RDB"
@@ -258,6 +282,7 @@ config TARGET_T1024RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG config TARGET_T1040QDS bool "Support T1040QDS"
@@ -266,6 +291,7 @@ config TARGET_T1040QDS select PHYS_64BIT imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_T1040RDB bool "Support T1040RDB"
@@ -274,6 +300,7 @@ config TARGET_T1040RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1040D4RDB bool "Support T1040D4RDB"
@@ -282,6 +309,7 @@ config TARGET_T1040D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1042RDB bool "Support T1042RDB"
@@ -290,6 +318,7 @@ config TARGET_T1042RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1042D4RDB bool "Support T1042D4RDB"
@@ -298,6 +327,7 @@ config TARGET_T1042D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1042RDB_PI bool "Support T1042RDB_PI"
@@ -306,6 +336,7 @@ config TARGET_T1042RDB_PI select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T2080QDS bool "Support T2080QDS"
@@ -336,12 +367,14 @@ config TARGET_T4160QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T4160RDB bool "Support T4160RDB" select ARCH_T4160 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_T4240QDS bool "Support T4240QDS"
@@ -350,6 +383,7 @@ config TARGET_T4240QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T4240RDB bool "Support T4240RDB"
@@ -357,6 +391,7 @@ config TARGET_T4240RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_CONTROLCENTERD bool "Support controlcenterd"
@@ -392,11 +427,13 @@ config TARGET_CYRUS_P5020 bool "Support Varisys Cyrus P5020" select ARCH_P5020 select PHYS_64BIT + imply PANIC_HANG config TARGET_CYRUS_P5040 bool "Support Varisys Cyrus P5040" select ARCH_P5040 select PHYS_64BIT + imply PANIC_HANG endchoice
configs/TWR-P1025_defconfig +1 -0
@@ -34,4 +34,5 @@ CONFIG_SYS_NS16550=y CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/UCP1020_SPIFLASH_defconfig +1 -0
@@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/UCP1020_defconfig +1 -0
@@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/adp-ae3xx_defconfig +1 -0
@@ -36,3 +36,4 @@ CONFIG_DM_SPI=y CONFIG_NDS_AE3XX_SPI=y CONFIG_TIMER=y CONFIG_AE3XX_TIMER=y +CONFIG_PANIC_HANG=y
configs/qemu-ppce500_defconfig +1 -0
@@ -24,4 +24,5 @@ CONFIG_DOS_PARTITION=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/tricorder_defconfig +1 -0
@@ -40,4 +40,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/tricorder_flash_defconfig +1 -0
@@ -39,4 +39,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/uniphier_ld4_sld8_defconfig +1 -0
@@ -52,3 +52,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y
configs/uniphier_v7_defconfig +1 -0
@@ -55,3 +55,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y
configs/uniphier_v8_defconfig +1 -0
@@ -52,3 +52,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y
configs/xpedite517x_defconfig +1 -0
@@ -27,4 +27,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/xpedite520x_defconfig +1 -0
@@ -28,4 +28,5 @@ CONFIG_CMD_PCA953X=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/xpedite537x_defconfig +1 -0
@@ -30,4 +30,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
configs/xpedite550x_defconfig +1 -0
@@ -30,4 +30,5 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y
include/configs/B4860QDS.h +0 -1
@@ -173,7 +173,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/C29XPCIE.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000#define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* DDR Setup */ #define CONFIG_DDR_SPD
include/configs/MPC8536DS.h +0 -1
@@ -69,7 +69,6 @@#define CONFIG_SYS_MEMTEST_START 0x00010000/* skip exception vectors */ #define CONFIG_SYS_MEMTEST_END 0x1f000000/* skip u-boot at top of RAM */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L2 Cache as L2 SRAM
include/configs/MPC8544DS.h +0 -1
@@ -46,7 +46,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xe0000000#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
include/configs/MPC8572DS.h +0 -1
@@ -58,7 +58,6 @@#define CONFIG_SYS_MEMTEST_START 0x00000000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x7fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L2 Cache as L2 SRAM
include/configs/P1010RDB.h +0 -1
@@ -215,7 +215,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* DDR Setup */ #define CONFIG_SYS_DDR_RAW_TIMING
include/configs/P1023RDB.h +0 -2
@@ -52,8 +52,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MEMTEST_START 0x01000000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x02000000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ -/* Implement conversion of addresses in the LBC */ #define CONFIG_SYS_LBC_LBCR 0x00000000#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
include/configs/P2041RDB.h +0 -1
@@ -116,7 +116,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/T102xQDS.h +0 -1
@@ -196,7 +196,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/T102xRDB.h +0 -1
@@ -219,7 +219,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/T1040QDS.h +0 -1
@@ -127,7 +127,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/T104xRDB.h +0 -1
@@ -226,7 +226,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/T4240RDB.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/UCP1020.h +0 -1
@@ -138,7 +138,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
include/configs/adp-ae3xx.h +0 -1
@@ -21,7 +21,6 @@#define CONFIG_SKIP_TRUNOFF_WATCHDOG #define CONFIG_CMDLINE_EDITING -#define CONFIG_PANIC_HANG #define CONFIG_ARCH_MAP_SYSMEM
include/configs/corenet_ds.h +0 -1
@@ -128,7 +128,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/cyrus.h +0 -1
@@ -89,7 +89,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/ls1012a_common.h +0 -1
@@ -109,7 +109,6 @@#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ -#define CONFIG_PANIC_HANG #define CONFIG_SYS_BOOTM_LEN (64 << 20)/* Increase max gunzip size */ #include <asm/arch/soc.h>
include/configs/ls1088a_common.h +0 -2
@@ -228,8 +228,6 @@ unsigned long long get_qixis_addr(void);#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ -#ifdef CONFIG_SPL #define CONFIG_SPL_BSS_START_ADDR 0x80100000#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
include/configs/ls2080a_common.h +0 -2
@@ -221,8 +221,6 @@ unsigned long long get_qixis_addr(void);#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ -#define CONFIG_SPL_BSS_START_ADDR 0x80100000#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000#define CONFIG_SPL_FRAMEWORK
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -272,7 +272,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
include/configs/p1_twr.h +0 -1
@@ -71,7 +71,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
include/configs/qemu-ppce500.h +0 -1
@@ -31,7 +31,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* Needed to fill the ccsrbar pointer */
include/configs/t4qds.h +0 -1
@@ -54,7 +54,6 @@#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM
include/configs/tricorder.h +0 -1
@@ -90,7 +90,6 @@/* hang() the board on panic() */ -#define CONFIG_PANIC_HANG /* environment placement (for NAND), is different for FLASHCARD but does not * harm there */
include/configs/uniphier.h +0 -2
@@ -223,8 +223,6 @@/* for LD20; the last 64 byte is used for dynamic DDR PHY training */ #define CONFIG_SYS_MEM_TOP_HIDE 64 -#define CONFIG_PANIC_HANG -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)/* only for SPL */
include/configs/xpedite517x.h +0 -1
@@ -487,7 +487,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_CMDLINE_EDITING 1/* Command-line editing */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
include/configs/xpedite520x.h +0 -1
@@ -291,7 +291,6 @@#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
include/configs/xpedite537x.h +0 -1
@@ -341,7 +341,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
include/configs/xpedite550x.h +0 -1
@@ -339,7 +339,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000/* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
include/configs/xtfpga.h +0 -4
@@ -130,10 +130,6 @@#define CONFIG_MX_CYCLIC #define CONFIG_SHOW_BOOT_PROGRESS -#ifdef DEBUG -#define CONFIG_PANIC_HANG 1/* Require manual reboot */ -#endif -/*=========================================*/ /* FPGA Registers (board info and control) */
lib/Kconfig +10 -0
@@ -45,6 +45,16 @@ config USE_TINY_PRINTF The supported format specifiers are %c, %s, %u/%d and %x. +config PANIC_HANG + bool "Do not reset the system on fatal error" + help + Define this option to stop the system in case of a fatal error, + so that you have to reset it manually. This is probably NOT a good + idea for an embedded system where you want the system to reboot + automatically as fast as possible, but it may be useful during + development since you can try to debug the conditions that lead to + the situation. + config REGEX bool "Enable regular expression support" default y if NET
Signature · 1 line
2.7.4
PATCH 2/5 ARM: openrd: set CONFIG_LOGLEVEL to 2
In reply to Masahiro YamadaThese boards are on the boundary of "u-boot-nodtb.bin exceeds file size limit" error.
Reduce the log-level to save memory footprint.
---
configs/openrd_base_defconfig | 2 +- configs/openrd_client_defconfig | 2 +- configs/openrd_ultimate_defconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
configs/openrd_base_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_TARGET_OPENRD=y CONFIG_IDENT_STRING="\nOpenRD-Base" CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE" CONFIG_BOOTDELAY=3 -CONFIG_LOGLEVEL=3 +CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y
configs/openrd_client_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_TARGET_OPENRD=y CONFIG_IDENT_STRING="\nOpenRD-Client" CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT" CONFIG_BOOTDELAY=3 -CONFIG_LOGLEVEL=3 +CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y
configs/openrd_ultimate_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_TARGET_OPENRD=y CONFIG_IDENT_STRING="\nOpenRD-Ultimate" CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE" CONFIG_BOOTDELAY=3 -CONFIG_LOGLEVEL=3 +CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y
Signature · 1 line
2.7.4
PATCH 2/5 ARM: openrd: set CONFIG_LOGLEVEL to 2
2017-11-28 21:23 GMT+09:00 Masahiro Yamada <[email protected]>:
Quoted 8 lines
These boards are on the boundary of "u-boot-nodtb.bin exceeds file size limit" error.
Reduce the log-level to save memory footprint.
Signed-off-by Masahiro Yamada <[email protected]>---
Applied to u-boot-uniphier
because I need this for the NAND updates.
PATCH 3/5 Enable CONFIG_PANIC_HANG for boards without do_reset()
In reply to Masahiro YamadaCalling panic() for these boards causes build error:
undefined reference to `do_reset'
They must compile do_reset(), or define CONFIG_PANIC_HANG.
---
configs/cl-som-imx7_defconfig | 1 + configs/evb-rk3229_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + configs/opos6uldev_defconfig | 1 + 4 files changed, 4 insertions(+)
configs/cl-som-imx7_defconfig +1 -0
@@ -51,3 +51,4 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_OF_LIBFDT=y +CONFIG_PANIC_HANG=y
configs/evb-rk3229_defconfig +1 -0
@@ -48,3 +48,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x2207 CONFIG_USB_GADGET_PRODUCT_NUM=0x320a CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_ERRNO_STR=y +CONFIG_PANIC_HANG=y
configs/mccmon6_sd_defconfig +1 -0
@@ -44,3 +44,4 @@ CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_PANIC_HANG=y
configs/opos6uldev_defconfig +1 -0
@@ -84,3 +84,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_VIDEO=y CONFIG_OF_LIBFDT_OVERLAY=y # CONFIG_EFI_LOADER is not set +CONFIG_PANIC_HANG=y
Signature · 1 line
2.7.4
PATCH 4/5 treewide: convert assert() to BUG_ON()
In reply to Masahiro YamadaWe do not need multiple ways to do the same thing. Instead of assert(), use BUG_ON() from Linux. The logic is opposite, but Coccinelle is of great help for such a conversion. We could simply convert assert(x) to BUG_ON(!x) for all expressions "x", but I did a bit better job by converting assert(a == b) to BUG_ON(a != b), etc.
The semantic patch I used is as follows:
// <smpl>
@@
expression a, b;
@@
-assert(a == b)
+BUG_ON(a != b)
@@
expression a, b;
@@
-assert(a != b)
+BUG_ON(a == b)
@@
expression a, b;
@@
-assert(a < b)
+BUG_ON(a >= b)
@@
expression a, b;
@@
-assert(a > b)
+BUG_ON(a <= b)
@@
expression a, b;
@@
-assert(a <= b)
+BUG_ON(a > b)
@@
expression a, b;
@@
-assert(a >= b)
+BUG_ON(a < b)
@@
expression a;
@@
-assert(!a)
+BUG_ON(a)
@@
expression a;
@@
-assert(a)
+BUG_ON(!a)
// </smpl>
---
arch/arm/mach-exynos/clock.c | 4 +- arch/arm/mach-tegra/clock.c | 10 ++-- arch/arm/mach-tegra/pinmux-common.c | 80 +++++++++++++-------------- arch/arm/mach-tegra/tegra114/clock.c | 10 ++-- arch/arm/mach-tegra/tegra124/clock.c | 10 ++-- arch/arm/mach-tegra/tegra20/clock.c | 14 ++--- arch/arm/mach-tegra/tegra210/clock.c | 10 ++-- arch/arm/mach-tegra/tegra30/clock.c | 10 ++-- arch/sandbox/cpu/state.c | 4 +- arch/x86/cpu/intel_common/mrc.c | 2 +- arch/x86/lib/efi/efi.c | 2 +- arch/x86/lib/fsp/fsp_support.c | 6 +- arch/x86/lib/physmem.c | 5 +- board/freescale/qemu-ppce500/qemu-ppce500.c | 8 +-- cmd/bootefi.c | 2 +- cmd/mtdparts.c | 2 +- cmd/tpm_test.c | 28 +++++----- common/dlmalloc.c | 86 ++++++++++++++--------------- common/fdt_support.c | 2 +- common/hwconfig.c | 36 ++++++------ drivers/clk/clk-uclass.c | 2 +- drivers/clk/rockchip/clk_rk3036.c | 23 ++++---- drivers/clk/rockchip/clk_rk3188.c | 28 ++++------ drivers/clk/rockchip/clk_rk322x.c | 23 ++++---- drivers/clk/rockchip/clk_rk3288.c | 36 +++++------- drivers/clk/rockchip/clk_rk3328.c | 8 +-- drivers/clk/rockchip/clk_rk3368.c | 4 +- drivers/clk/rockchip/clk_rk3399.c | 51 +++++++---------- drivers/clk/rockchip/clk_rv1108.c | 2 +- drivers/core/device-remove.c | 8 +-- drivers/core/device.c | 2 +- drivers/core/ofnode.c | 24 ++++---- drivers/core/uclass.c | 4 +- drivers/gpio/gpio-uclass.c | 2 +- drivers/i2c/i2c-uclass.c | 2 +- drivers/input/input.c | 4 +- drivers/input/key_matrix.c | 2 +- drivers/misc/cros_ec.c | 10 ++-- drivers/misc/cros_ec_i2c.c | 4 +- drivers/mtd/nand/tegra_nand.c | 2 +- drivers/mtd/spi/sandbox.c | 4 +- drivers/net/fsl-mc/mc.c | 2 +- drivers/phy/phy-uclass.c | 2 +- drivers/power/tps6586x.c | 4 +- drivers/rtc/rtc-uclass.c | 10 ++-- drivers/sound/sound.c | 2 +- drivers/spi/exynos_spi.c | 6 +- drivers/usb/emul/sandbox_flash.c | 2 +- drivers/usb/host/usb-uclass.c | 4 +- drivers/video/stb_truetype.h | 2 +- fs/ext4/dev.c | 2 +- fs/ext4/ext4_common.c | 2 +- fs/ext4/ext4_journal.c | 2 +- fs/fat/fat.c | 2 +- include/dm/ofnode.h | 4 +- include/efi_loader.h | 12 ++-- lib/circbuf.c | 16 +++--- lib/efi_loader/efi_boottime.c | 2 +- lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_file.c | 2 +- lib/efi_loader/efi_memory.c | 2 +- lib/fdtdec.c | 8 +-- lib/membuff.c | 4 +- lib/physmem.c | 4 +- lib/qsort.c | 2 +- lib/slre.c | 8 +-- net/eth-uclass.c | 2 +- net/eth_legacy.c | 2 +- net/net.c | 2 +- test/command_ut.c | 30 +++++----- test/compression.c | 16 +++--- test/print_ut.c | 42 +++++++------- 72 files changed, 371 insertions(+), 407 deletions(-)
arch/arm/mach-exynos/clock.c +2 -2
@@ -1405,8 +1405,8 @@ static int clock_calc_best_scalar(unsigned int main_scaler_bits,debug ("Input Rate is %u, Target is %u, Cap is %u\n" , input_rate, target_rate, cap); -assert (best_fine_scalar !=NULL ); -assert (main_scaler_bits <= fine_scalar_bits); +BUG_ON (best_fine_scalar ==NULL ); +BUG_ON (main_scaler_bits > fine_scalar_bits); *best_fine_scalar =1 ;
arch/arm/mach-tegra/clock.c +5 -5
@@ -74,7 +74,7 @@ static struct clk_pll *get_pll(enum clock_id clkid)struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE ; -assert (clock_id_is_pll (clkid)); +BUG_ON (!clock_id_is_pll (clkid));if (clkid >= (enum clock_id )TEGRA_CLK_PLLS ) {debug ("%s: Invalid PLL %d\n" , __func__, clkid);return NULL ;
@@ -94,7 +94,7 @@ int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];u32 data; -assert (clkid !=CLOCK_ID_USB ); +BUG_ON (clkid ==CLOCK_ID_USB );/* Safety check, adds to code size but is small */ if (!clock_id_is_pll (clkid) || clkid ==CLOCK_ID_USB )
@@ -454,7 +454,7 @@ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,if (extra_div) *extra_div = xdiv; -assert (divider >=0 ); +BUG_ON (0 > divider);if (adjust_periph_pll (periph_id, source, mux_bits, divider))return -1U ; debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
@@ -515,7 +515,7 @@ void reset_cmplx_set_enable(int cpu, int which, int reset)u32 mask;/* Form the mask, which depends on the cpu chosen (2 or 4) */ -assert (cpu >=0 && cpu <MAX_NUM_CPU ); +BUG_ON (!(cpu >=0 && cpu <MAX_NUM_CPU )); mask = which << cpu;/* either enable or disable those reset for that CPU */
@@ -665,7 +665,7 @@ int clock_decode_periph_id(struct udevice *dev)if (err)return -1 ; id =clk_id_to_periph_id (cell[1 ]); -assert (clock_periph_id_isvalid (id)); +BUG_ON (!clock_periph_id_isvalid (id)); return id; }#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
arch/arm/mach-tegra/pinmux-common.c +40 -40
206 lines not on this page · raw message
arch/arm/mach-tegra/tegra114/clock.c +5 -5
@@ -486,9 +486,9 @@ u32 *get_periph_source_reg(enum periph_id periph_id)if (periph_id ==PERIPH_ID_CSI )return &clkrst->crc_clk_src[PERIPH_ID_CSI +1 ]; -assert (periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT ); +BUG_ON (!(periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT )); internal_id = periph_id_to_internal_id[periph_id]; -assert (internal_id !=-1 ); +BUG_ON (internal_id ==-1 );if (internal_id >=PERIPHC_VW_FIRST ) { internal_id -=PERIPHC_VW_FIRST ;return &clkrst->crc_clk_src_vw[internal_id];
@@ -560,7 +560,7 @@ int get_periph_clock_source(enum periph_id periph_id,int mux, err; err =get_periph_clock_info (periph_id, mux_bits, divider_bits, &type); -assert (!err); +BUG_ON (err);for (mux =0 ; mux <CLOCK_MAX_MUX ; mux++)if (clock_source[type][mux] == parent)
@@ -580,7 +580,7 @@ void clock_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable the clock to this peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if ((int )periph_id < (int )PERIPH_ID_VW_FIRST ) clk = &clkrst->crc_clk_out_enb[PERIPH_REG (periph_id)];else
@@ -601,7 +601,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable reset to the peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if (periph_id <PERIPH_ID_VW_FIRST ) reset = &clkrst->crc_rst_dev[PERIPH_REG (periph_id)];else
arch/arm/mach-tegra/tegra124/clock.c +5 -5
@@ -628,9 +628,9 @@ u32 *get_periph_source_reg(enum periph_id periph_id)if (periph_id ==PERIPH_ID_CSI )return &clkrst->crc_clk_src[PERIPH_ID_CSI +1 ]; -assert (periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT ); +BUG_ON (!(periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT )); internal_id = periph_id_to_internal_id[periph_id]; -assert (internal_id !=-1 ); +BUG_ON (internal_id ==-1 );if (internal_id >=PERIPHC_X_FIRST ) { internal_id -=PERIPHC_X_FIRST ;return &clkrst->crc_clk_src_x[internal_id];
@@ -706,7 +706,7 @@ int get_periph_clock_source(enum periph_id periph_id,int mux, err; err =get_periph_clock_info (periph_id, mux_bits, divider_bits, &type); -assert (!err); +BUG_ON (err);for (mux =0 ; mux <CLOCK_MAX_MUX ; mux++)if (clock_source[type][mux] == parent)
@@ -726,7 +726,7 @@ void clock_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable the clock to this peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if ((int )periph_id < (int )PERIPH_ID_VW_FIRST ) clk = &clkrst->crc_clk_out_enb[PERIPH_REG (periph_id)];else if ((int )periph_id <PERIPH_ID_X_FIRST )
@@ -749,7 +749,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable reset to the peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if (periph_id <PERIPH_ID_VW_FIRST ) reset = &clkrst->crc_rst_dev[PERIPH_REG (periph_id)];else if ((int )periph_id <PERIPH_ID_X_FIRST )
arch/arm/mach-tegra/tegra20/clock.c +7 -7
@@ -407,9 +407,9 @@ u32 *get_periph_source_reg(enum periph_id periph_id) (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE ;enum periphc_internal_id internal_id; -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id)); internal_id = periph_id_to_internal_id[periph_id]; -assert (internal_id !=-1 ); +BUG_ON (internal_id ==-1 );return &clkrst->crc_clk_src[internal_id]; }
@@ -483,7 +483,7 @@ int get_periph_clock_source(enum periph_id periph_id,int mux, err; err =get_periph_clock_info (periph_id, mux_bits, divider_bits, &type); -assert (!err); +BUG_ON (err);for (mux =0 ; mux <CLOCK_MAX_MUX ; mux++)if (clock_source[type][mux] == parent)
@@ -494,8 +494,8 @@ int get_periph_clock_source(enum periph_id periph_id,* which is not in our table. If not, then they are asking for a * source which this peripheral can't access through its mux. */ -assert (type ==CLOCK_TYPE_PCXTS ); -assert (parent ==CLOCK_ID_SFROM32KHZ ); +BUG_ON (type !=CLOCK_TYPE_PCXTS ); +BUG_ON (parent !=CLOCK_ID_SFROM32KHZ );if (type ==CLOCK_TYPE_PCXTS && parent ==CLOCK_ID_SFROM32KHZ )return 4 ;/* mux value for this clock */
@@ -513,7 +513,7 @@ void clock_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable the clock to this peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id)); reg =readl (clk);if (enable) reg |=PERIPH_MASK (periph_id);
@@ -530,7 +530,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable reset to the peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id)); reg =readl (reset);if (enable) reg |=PERIPH_MASK (periph_id);
arch/arm/mach-tegra/tegra210/clock.c +5 -5
@@ -707,9 +707,9 @@ u32 *get_periph_source_reg(enum periph_id periph_id)if (periph_id ==PERIPH_ID_CSI )return &clkrst->crc_clk_src[PERIPH_ID_CSI +1 ]; -assert (periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT ); +BUG_ON (!(periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT )); internal_id =INTERNAL_ID (periph_id_to_internal_id[periph_id]); -assert (internal_id !=-1 ); +BUG_ON (internal_id ==-1 );if (internal_id <PERIPHC_VW_FIRST )/* L, H, U */
@@ -796,7 +796,7 @@ int get_periph_clock_source(enum periph_id periph_id,int mux, err; err =get_periph_clock_info (periph_id, mux_bits, divider_bits, &type); -assert (!err); +BUG_ON (err);for (mux =0 ; mux <CLOCK_MAX_MUX ; mux++)if (clock_source[type][mux] == parent)
@@ -816,7 +816,7 @@ void clock_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable the clock to this peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if ((int )periph_id < (int )PERIPH_ID_VW_FIRST ) clk = &clkrst->crc_clk_out_enb[PERIPH_REG (periph_id)];else if ((int )periph_id < (int )PERIPH_ID_X_FIRST )
@@ -842,7 +842,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable reset to the peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if (periph_id <PERIPH_ID_VW_FIRST ) reset = &clkrst->crc_rst_dev[PERIPH_REG (periph_id)];else if ((int )periph_id < (int )PERIPH_ID_X_FIRST )
arch/arm/mach-tegra/tegra30/clock.c +5 -5
@@ -466,9 +466,9 @@ u32 *get_periph_source_reg(enum periph_id periph_id)if (periph_id ==PERIPH_ID_CSI )return &clkrst->crc_clk_src[PERIPH_ID_CSI +1 ]; -assert (periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT ); +BUG_ON (!(periph_id >=PERIPH_ID_FIRST && periph_id <PERIPH_ID_COUNT )); internal_id = periph_id_to_internal_id[periph_id]; -assert (internal_id !=-1 ); +BUG_ON (internal_id ==-1 );if (internal_id >=PERIPHC_VW_FIRST ) { internal_id -=PERIPHC_VW_FIRST ;return &clkrst->crc_clk_src_vw[internal_id];
@@ -540,7 +540,7 @@ int get_periph_clock_source(enum periph_id periph_id,int mux, err; err =get_periph_clock_info (periph_id, mux_bits, divider_bits, &type); -assert (!err); +BUG_ON (err);for (mux =0 ; mux <CLOCK_MAX_MUX ; mux++)if (clock_source[type][mux] == parent)
@@ -560,7 +560,7 @@ void clock_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable the clock to this peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if ((int )periph_id < (int )PERIPH_ID_VW_FIRST ) clk = &clkrst->crc_clk_out_enb[PERIPH_REG (periph_id)];else
@@ -581,7 +581,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)u32 reg;/* Enable/disable reset to the peripheral */ -assert (clock_periph_id_isvalid (periph_id)); +BUG_ON (!clock_periph_id_isvalid (periph_id));if (periph_id <PERIPH_ID_VW_FIRST ) reset = &clkrst->crc_rst_dev[PERIPH_REG (periph_id)];else
arch/sandbox/cpu/state.c +2 -2
@@ -333,7 +333,7 @@ int state_setprop(int node, const char *prop_name, const void *data, int size)struct sandbox_state *state_get_current (void ) { -assert (state); +BUG_ON (!state);return state; }
@@ -367,7 +367,7 @@ int state_init(void) state->ram_size =CONFIG_SYS_SDRAM_SIZE ; state->ram_buf =os_malloc (state->ram_size); -assert (state->ram_buf); +BUG_ON (!state->ram_buf);state_reset_for_test (state);/*
arch/x86/cpu/intel_common/mrc.c +1 -1
@@ -42,7 +42,7 @@ ulong mrc_common_board_get_usable_ram_top(ulong total_size) }/* If no suitable area was found, return an error. */ -assert (largest); +BUG_ON (!largest);if (!largest || largest->size < (2 <<20 ))panic ("No available memory found for relocation" );
arch/x86/lib/efi/efi.c +1 -1
@@ -55,7 +55,7 @@ ulong board_get_usable_ram_top(ulong total_size) }/* If no suitable area was found, return an error. */ -assert (largest); +BUG_ON (!largest);if (!largest || (largest->num_pages <<EFI_PAGE_SHIFT ) < (2 <<20 )) goto err;
arch/x86/lib/fsp/fsp_support.c +3 -3
@@ -91,7 +91,7 @@ void fsp_continue(u32 status, void *hob_list) {post_code (POST_MRC ); -assert (status ==0 ); +BUG_ON (status !=0 );/* The boot loader main function entry */ fsp_init_done (hob_list);
@@ -126,7 +126,7 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf) fsp_hdr->cfg_region_off);/* Verify the VPD data region is valid */ -assert (fsp_vpd->sign ==VPD_IMAGE_ID ); +BUG_ON (fsp_vpd->sign !=VPD_IMAGE_ID ); fsp_upd = &config_data.fsp_upd;
@@ -135,7 +135,7 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf) sizeof(struct upd_region));/* Verify the UPD data region is valid */ -assert (fsp_upd->terminator ==UPD_TERMINATOR ); +BUG_ON (fsp_upd->terminator !=UPD_TERMINATOR );#endif memset (&rt_buf,0 ,sizeof (struct fspinit_rtbuf ));
arch/x86/lib/physmem.c +2 -3
@@ -141,8 +141,7 @@ static void x86_phys_memset_page(phys_addr_t map_addr, uintptr_t offset, int c,const uintptr_t window =LARGE_PAGE_SIZE ;/* Make sure the window is below U-Boot. */ -assert (window +LARGE_PAGE_SIZE < - gd->relocaddr -CONFIG_SYS_MALLOC_LEN -CONFIG_SYS_STACK_SIZE ); +BUG_ON (window +LARGE_PAGE_SIZE >= gd->relocaddr -CONFIG_SYS_MALLOC_LEN -CONFIG_SYS_STACK_SIZE );/* Map the page into the window and then memset the appropriate part. */ x86_phys_map_page (window, map_addr,1 );memset ((void *)(window + offset), c, size);
@@ -165,7 +164,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size)phys_size_t low_size =min (max_addr +1 - start, size);void *start_ptr = (void *)(uintptr_t )start; -assert (((phys_addr_t )(uintptr_t )start) == start); +BUG_ON (((phys_addr_t )(uintptr_t )start) != start);memset (start_ptr, c, low_size); start += low_size; size -= low_size;
board/freescale/qemu-ppce500/qemu-ppce500.c +3 -5
@@ -109,7 +109,7 @@ static int pci_map_region(void *fdt, int pci_node, int range_id,return -1 ;/* Map virtual memory for range */ -assert (!tlb_map_range (map_addr, addr, size,TLB_MAP_IO )); +BUG_ON (tlb_map_range (map_addr, addr, size,TLB_MAP_IO )); *pmap_addr = map_addr + size;if (pvaddr)
@@ -286,15 +286,13 @@ void init_tlbs(void)init_used_tlb_cams ();/* Create a dynamic AS=0 CCSRBAR mapping */ -assert (!tlb_map_range (CONFIG_SYS_CCSRBAR ,CONFIG_SYS_CCSRBAR_PHYS , -1024 *1024 ,TLB_MAP_IO )); +BUG_ON (tlb_map_range (CONFIG_SYS_CCSRBAR ,CONFIG_SYS_CCSRBAR_PHYS ,1024 *1024 ,TLB_MAP_IO ));/* Create a RAM map that spans all accessible RAM */ setup_ddr_tlbs (ram_size >>20 );/* Create a map for the TLB */ -assert (!tlb_map_range ((ulong )get_fdt_virt (),get_fdt_phys (), -1024 *1024 ,TLB_MAP_RAM )); +BUG_ON (tlb_map_range ((ulong )get_fdt_virt (),get_fdt_phys (),1024 *1024 ,TLB_MAP_RAM )); }void init_laws (void )
cmd/bootefi.c +1 -1
@@ -147,7 +147,7 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt, memdp =efi_dp_from_mem (0 ,0 ,0 ); device_path = image_path = memdp; }else { -assert (device_path && image_path); +BUG_ON (!(device_path && image_path)); }/* Initialize and populate EFI object list */
cmd/mtdparts.c +1 -1
@@ -852,7 +852,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_debug ("===device_parse===\n" ); -assert (retdev); +BUG_ON (!retdev); *retdev =NULL ;if (ret)
cmd/tpm_test.c +14 -14
@@ -180,13 +180,13 @@ static int test_fast_enable(void)TPM_CHECK (tpm_get_flags (&disable, &deactivated,NULL ));printf ("\tdisable is %d, deactivated is %d\n" , disable, deactivated); -assert (disable ==1 && deactivated ==1 ); +BUG_ON (!(disable ==1 && deactivated ==1 ));TPM_CHECK (tpm_physical_enable ());TPM_CHECK (tpm_physical_set_deactivated (0 ));TPM_CHECK (tpm_get_flags (&disable, &deactivated,NULL ));printf ("\tdisable is %d, deactivated is %d\n" , disable, deactivated); -assert (disable ==0 && deactivated ==0 ); +BUG_ON (!(disable ==0 && deactivated ==0 )); }printf ("\tdone\n" );return 0 ;
@@ -213,22 +213,22 @@ static int test_global_lock(void)/* Verifies that write to index0 fails */ x =1 ; result =tpm_nv_write_value (INDEX0 , (uint8_t *)&x,sizeof (x)); -assert (result ==TPM_AREA_LOCKED ); +BUG_ON (result !=TPM_AREA_LOCKED );TPM_CHECK (tpm_nv_read_value (INDEX0 , (uint8_t *)&x,sizeof (x))); -assert (x ==0 ); +BUG_ON (x !=0 );/* Verifies that write to index1 is still possible */ x =2 ;TPM_CHECK (tpm_nv_write_value (INDEX1 , (uint8_t *)&x,sizeof (x)));TPM_CHECK (tpm_nv_read_value (INDEX1 , (uint8_t *)&x,sizeof (x))); -assert (x ==2 ); +BUG_ON (x !=2 );/* Turns off PP */ tpm_tsc_physical_presence (PHYS_PRESENCE );/* Verifies that write to index1 fails */ x =3 ; result =tpm_nv_write_value (INDEX1 , (uint8_t *)&x,sizeof (x)); -assert (result ==TPM_BAD_PRESENCE ); +BUG_ON (result !=TPM_BAD_PRESENCE );TPM_CHECK (tpm_nv_read_value (INDEX1 , (uint8_t *)&x,sizeof (x))); -assert (x ==2 ); +BUG_ON (x !=2 );printf ("\tdone\n" );return 0 ; }
@@ -325,7 +325,7 @@ static int test_redefine_unowned(void)TPM_CHECK (TlclStartupIfNeeded ());TPM_CHECK (tpm_self_test_full ());TPM_CHECK (tpm_tsc_physical_presence (PRESENCE )); -assert (!tpm_is_owned ()); +BUG_ON (tpm_is_owned ());/* Ensures spaces exist. */ TPM_CHECK (tpm_nv_read_value (INDEX0 , (uint8_t *)&x,sizeof (x)));
@@ -344,7 +344,7 @@ static int test_redefine_unowned(void)/* Verifies that index0 cannot be redefined */ result =tpm_nv_define_space (INDEX0 , perm,sizeof (uint32_t )); -assert (result ==TPM_AREA_LOCKED ); +BUG_ON (result !=TPM_AREA_LOCKED );/* Checks that index1 can */ TPM_CHECK (tpm_nv_define_space (INDEX1 , perm,2 *sizeof (uint32_t )));
@@ -355,9 +355,9 @@ static int test_redefine_unowned(void)/* Verifies that neither index0 nor index1 can be redefined */ result =tpm_nv_define_space (INDEX0 , perm,sizeof (uint32_t )); -assert (result ==TPM_BAD_PRESENCE ); +BUG_ON (result !=TPM_BAD_PRESENCE ); result =tpm_nv_define_space (INDEX1 , perm,sizeof (uint32_t )); -assert (result ==TPM_BAD_PRESENCE ); +BUG_ON (result !=TPM_BAD_PRESENCE );printf ("done\n" );return 0 ;
@@ -376,9 +376,9 @@ static int test_space_perm(void)TPM_CHECK (tpm_continue_self_test ());TPM_CHECK (tpm_tsc_physical_presence (PRESENCE ));TPM_CHECK (tpm_get_permissions (INDEX0 , &perm)); -assert ((perm &PERMPPGL ) ==PERMPPGL ); +BUG_ON ((perm &PERMPPGL ) !=PERMPPGL );TPM_CHECK (tpm_get_permissions (INDEX1 , &perm)); -assert ((perm &PERMPP ) ==PERMPP ); +BUG_ON ((perm &PERMPP ) !=PERMPP );printf ("done\n" );return 0 ; }
@@ -469,7 +469,7 @@ static int test_write_limit(void)case TPM_SUCCESS :break ;case TPM_MAXNVWRITES : -assert (i >=TPM_MAX_NV_WRITES_NOOWNER ); +BUG_ON (TPM_MAX_NV_WRITES_NOOWNER > i);default :pr_err ("\tunexpected error code %d (0x%x)\n" , result, result);
common/dlmalloc.c +43 -43
216 lines not on this page · raw message
common/fdt_support.c +1 -1
@@ -1107,7 +1107,7 @@ static struct of_bus *of_match_bus(const void *blob, int parentoffset)* in the of_busses array or something equally catastrophic has * gone wrong. */ -assert (0 ); +BUG_ON (!0 );return NULL ; }
common/hwconfig.c +18 -18
@@ -248,37 +248,37 @@ int main() ret =hwconfig_arg ("key1" , &len);printf ("%zd %.*s\n" , len, (int )len, ret); -assert (len ==29 ); -assert (hwconfig_arg_cmp ("key1" ,"subkey1=value1,subkey2=value2" )); -assert (!strncmp (ret,"subkey1=value1,subkey2=value2" , len)); +BUG_ON (len !=29 ); +BUG_ON (!hwconfig_arg_cmp ("key1" ,"subkey1=value1,subkey2=value2" )); +BUG_ON (strncmp (ret,"subkey1=value1,subkey2=value2" , len)); ret =hwconfig_subarg ("key1" ,"subkey1" , &len);printf ("%zd %.*s\n" , len, (int )len, ret); -assert (len ==6 ); -assert (hwconfig_subarg_cmp ("key1" ,"subkey1" ,"value1" )); -assert (!strncmp (ret,"value1" , len)); +BUG_ON (len !=6 ); +BUG_ON (!hwconfig_subarg_cmp ("key1" ,"subkey1" ,"value1" )); +BUG_ON (strncmp (ret,"value1" , len)); ret =hwconfig_subarg ("key1" ,"subkey2" , &len);printf ("%zd %.*s\n" , len, (int )len, ret); -assert (len ==6 ); -assert (hwconfig_subarg_cmp ("key1" ,"subkey2" ,"value2" )); -assert (!strncmp (ret,"value2" , len)); +BUG_ON (len !=6 ); +BUG_ON (!hwconfig_subarg_cmp ("key1" ,"subkey2" ,"value2" )); +BUG_ON (strncmp (ret,"value2" , len)); ret =hwconfig_arg ("key2" , &len);printf ("%zd %.*s\n" , len, (int )len, ret); -assert (len ==6 ); -assert (hwconfig_arg_cmp ("key2" ,"value3" )); -assert (!strncmp (ret,"value3" , len)); +BUG_ON (len !=6 ); +BUG_ON (!hwconfig_arg_cmp ("key2" ,"value3" )); +BUG_ON (strncmp (ret,"value3" , len)); -assert (hwconfig ("key3" )); -assert (hwconfig_arg ("key4" , &len) ==NULL ); -assert (hwconfig_arg ("bogus" , &len) ==NULL ); +BUG_ON (!hwconfig ("key3" )); +BUG_ON (hwconfig_arg ("key4" , &len) !=NULL ); +BUG_ON (hwconfig_arg ("bogus" , &len) !=NULL );unenv_set ("hwconfig" ); -assert (hwconfig (NULL ) ==0 ); -assert (hwconfig ("" ) ==0 ); -assert (hwconfig ("key3" ) ==0 ); +BUG_ON (hwconfig (NULL ) !=0 ); +BUG_ON (hwconfig ("" ) !=0 ); +BUG_ON (hwconfig ("key3" ) !=0 );return 0 ; }
drivers/clk/clk-uclass.c +1 -1
@@ -64,7 +64,7 @@ int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)debug ("%s(dev=%p, index=%d, clk=%p)\n" , __func__, dev, index, clk); -assert (clk); +BUG_ON (!clk); clk->dev =NULL ; ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
drivers/clk/rockchip/clk_rk3036.c +10 -13
@@ -58,8 +58,7 @@ static int rkclk_set_pll(struct rk3036_cru *cru, enum rk_clk_id clk_id, vco=%u Hz, output=%u Hz\n", pll, div->fbdiv, div->refdiv, div->postdiv1, div->postdiv2, vco_hz, output_hz); -assert (vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && - output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ ); +BUG_ON (!(vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ ));/* use integer mode */ rk_setreg (&pll->con1,1 <<PLL_DSMPD_SHIFT );
@@ -100,10 +99,10 @@ static void rkclk_init(struct rk3036_cru *cru)* core hz : apll = 1:1 */ aclk_div =APLL_HZ /CORE_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *CORE_ACLK_HZ ==APLL_HZ && aclk_div <0x7 ); +BUG_ON (!((aclk_div +1 ) *CORE_ACLK_HZ ==APLL_HZ && aclk_div <0x7 )); pclk_div =APLL_HZ /CORE_PERI_HZ -1 ; -assert ((pclk_div +1 ) *CORE_PERI_HZ ==APLL_HZ && pclk_div <0xf ); +BUG_ON (!((pclk_div +1 ) *CORE_PERI_HZ ==APLL_HZ && pclk_div <0xf )); rk_clrsetreg(&cru->cru_clksel_con[0], CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK,
@@ -120,13 +119,13 @@ static void rkclk_init(struct rk3036_cru *cru)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /BUS_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *BUS_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f ); +BUG_ON (!((aclk_div +1 ) *BUS_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f )); pclk_div =GPLL_HZ /BUS_PCLK_HZ -1 ; -assert ((pclk_div +1 ) *BUS_PCLK_HZ ==GPLL_HZ && pclk_div <=0x7 ); +BUG_ON (!((pclk_div +1 ) *BUS_PCLK_HZ ==GPLL_HZ && pclk_div <=0x7 )); hclk_div =GPLL_HZ /BUS_HCLK_HZ -1 ; -assert ((hclk_div +1 ) *BUS_HCLK_HZ ==GPLL_HZ && hclk_div <=0x3 ); +BUG_ON (!((hclk_div +1 ) *BUS_HCLK_HZ ==GPLL_HZ && hclk_div <=0x3 )); rk_clrsetreg(&cru->cru_clksel_con[0], BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
@@ -143,15 +142,13 @@ static void rkclk_init(struct rk3036_cru *cru)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /PERI_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f ); +BUG_ON (!((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f )); hclk_div =ilog2 (PERI_ACLK_HZ /PERI_HCLK_HZ ); -assert ((1 << hclk_div) *PERI_HCLK_HZ == -PERI_ACLK_HZ && (hclk_div <0x4 )); +BUG_ON (!((1 << hclk_div) *PERI_HCLK_HZ ==PERI_ACLK_HZ && (hclk_div <0x4 ))); pclk_div =ilog2 (PERI_ACLK_HZ /PERI_PCLK_HZ ); -assert ((1 << pclk_div) *PERI_PCLK_HZ == -PERI_ACLK_HZ && pclk_div <0x8 ); +BUG_ON (!((1 << pclk_div) *PERI_PCLK_HZ ==PERI_ACLK_HZ && pclk_div <0x8 )); rk_clrsetreg(&cru->cru_clksel_con[10], PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK |
@@ -251,7 +248,7 @@ static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate,if (src_clk_div >128 ) { src_clk_div =DIV_ROUND_UP (OSC_HZ /2 , freq); -assert (src_clk_div -1 <128 ); +BUG_ON (src_clk_div -1 >=128 ); mux =EMMC_SEL_24M ; }else { mux =EMMC_SEL_GPLL ;
drivers/clk/rockchip/clk_rk3188.c +12 -16
@@ -96,9 +96,7 @@ static int rkclk_set_pll(struct rk3188_cru *cru, enum rk_clk_id clk_id,debug ("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n" , (uint )pll, div->nf, div->nr, div->no, vco_hz, output_hz); -assert (vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && - output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ && - (div->no ==1 || !(div->no %2 ))); +BUG_ON (!(vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ && (div->no ==1 || !(div->no %2 ))));/* enter reset */ rk_setreg (&pll->con3,1 <<PLL_RESET_SHIFT );
@@ -295,7 +293,7 @@ static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate,debug ("%s: gclk_rate=%u\n" , __func__, gclk_rate);/* mmc clock defaulg div 2 internal, need provide double in cru */ src_clk_div =DIV_ROUND_UP (gclk_rate /2 , freq) -1 ; -assert (src_clk_div <=0x3f ); +BUG_ON (src_clk_div >0x3f );switch (periph) {case HCLK_EMMC :
@@ -350,16 +348,16 @@ static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, {int src_clk_div =DIV_ROUND_UP (gclk_rate, freq) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 );switch (periph) {case SCLK_SPI0 : -assert (src_clk_div <=SPI0_DIV_MASK ); +BUG_ON (src_clk_div >SPI0_DIV_MASK );rk_clrsetreg (&cru->cru_clksel_con[25 ],SPI0_DIV_MASK <<SPI0_DIV_SHIFT , src_clk_div <<SPI0_DIV_SHIFT );break ;case SCLK_SPI1 : -assert (src_clk_div <=SPI1_DIV_MASK ); +BUG_ON (src_clk_div >SPI1_DIV_MASK );rk_clrsetreg (&cru->cru_clksel_con[25 ],SPI1_DIV_MASK <<SPI1_DIV_SHIFT , src_clk_div <<SPI1_DIV_SHIFT );
@@ -400,7 +398,7 @@ static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =DIV_ROUND_UP (GPLL_HZ ,CPU_ACLK_HZ ) -1 ; -assert ((aclk_div +1 ) *CPU_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f ); +BUG_ON (!((aclk_div +1 ) *CPU_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f )); rk_clrsetreg(&cru->cru_clksel_con[0], CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT |
@@ -409,11 +407,11 @@ static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, aclk_div << A9_CPU_DIV_SHIFT); hclk_div =ilog2 (CPU_ACLK_HZ /CPU_HCLK_HZ ); -assert ((1 << hclk_div) *CPU_HCLK_HZ ==CPU_ACLK_HZ && hclk_div <0x3 ); +BUG_ON (!((1 << hclk_div) *CPU_HCLK_HZ ==CPU_ACLK_HZ && hclk_div <0x3 )); pclk_div =ilog2 (CPU_ACLK_HZ /CPU_PCLK_HZ ); -assert ((1 << pclk_div) *CPU_PCLK_HZ ==CPU_ACLK_HZ && pclk_div <0x4 ); +BUG_ON (!((1 << pclk_div) *CPU_PCLK_HZ ==CPU_ACLK_HZ && pclk_div <0x4 )); h2p_div =ilog2 (CPU_HCLK_HZ /CPU_H2P_HZ ); -assert ((1 << h2p_div) *CPU_H2P_HZ ==CPU_HCLK_HZ && pclk_div <0x3 ); +BUG_ON (!((1 << h2p_div) *CPU_H2P_HZ ==CPU_HCLK_HZ && pclk_div <0x3 )); rk_clrsetreg(&cru->cru_clksel_con[1], AHB2APB_DIV_MASK << AHB2APB_DIV_SHIFT |
@@ -428,15 +426,13 @@ static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /PERI_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f ); +BUG_ON (!((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f )); hclk_div =ilog2 (PERI_ACLK_HZ /PERI_HCLK_HZ ); -assert ((1 << hclk_div) *PERI_HCLK_HZ == -PERI_ACLK_HZ && (hclk_div <0x4 )); +BUG_ON (!((1 << hclk_div) *PERI_HCLK_HZ ==PERI_ACLK_HZ && (hclk_div <0x4 ))); pclk_div =ilog2 (PERI_ACLK_HZ /PERI_PCLK_HZ ); -assert ((1 << pclk_div) *PERI_PCLK_HZ == -PERI_ACLK_HZ && (pclk_div <0x4 )); +BUG_ON (!((1 << pclk_div) *PERI_PCLK_HZ ==PERI_ACLK_HZ && (pclk_div <0x4 ))); rk_clrsetreg(&cru->cru_clksel_con[10], PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
drivers/clk/rockchip/clk_rk322x.c +10 -13
@@ -54,8 +54,7 @@ static int rkclk_set_pll(struct rk322x_cru *cru, enum rk_clk_id clk_id,debug ("PLL@%p: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n" , pll, div->fbdiv, div->refdiv, div->postdiv1, div->postdiv2, vco_hz, output_hz); -assert (vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && - output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ ); +BUG_ON (!(vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ ));/* use integer mode */ rk_setreg (&pll->con1,1 <<PLL_DSMPD_SHIFT );
@@ -101,10 +100,10 @@ static void rkclk_init(struct rk322x_cru *cru)* core hz : apll = 1:1 */ aclk_div =APLL_HZ /CORE_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *CORE_ACLK_HZ ==APLL_HZ && aclk_div <0x7 ); +BUG_ON (!((aclk_div +1 ) *CORE_ACLK_HZ ==APLL_HZ && aclk_div <0x7 )); pclk_div =APLL_HZ /CORE_PERI_HZ -1 ; -assert ((pclk_div +1 ) *CORE_PERI_HZ ==APLL_HZ && pclk_div <0xf ); +BUG_ON (!((pclk_div +1 ) *CORE_PERI_HZ ==APLL_HZ && pclk_div <0xf )); rk_clrsetreg(&cru->cru_clksel_con[0], CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK,
@@ -121,13 +120,13 @@ static void rkclk_init(struct rk322x_cru *cru)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /BUS_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *BUS_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f ); +BUG_ON (!((aclk_div +1 ) *BUS_ACLK_HZ ==GPLL_HZ && aclk_div <=0x1f )); pclk_div =BUS_ACLK_HZ /BUS_PCLK_HZ -1 ; -assert ((pclk_div +1 ) *BUS_PCLK_HZ ==GPLL_HZ && pclk_div <=0x7 ); +BUG_ON (!((pclk_div +1 ) *BUS_PCLK_HZ ==GPLL_HZ && pclk_div <=0x7 )); hclk_div =BUS_ACLK_HZ /BUS_HCLK_HZ -1 ; -assert ((hclk_div +1 ) *BUS_HCLK_HZ ==GPLL_HZ && hclk_div <=0x3 ); +BUG_ON (!((hclk_div +1 ) *BUS_HCLK_HZ ==GPLL_HZ && hclk_div <=0x3 )); rk_clrsetreg(&cru->cru_clksel_con[0], BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
@@ -144,15 +143,13 @@ static void rkclk_init(struct rk322x_cru *cru)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /PERI_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f ); +BUG_ON (!((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f )); hclk_div =ilog2 (PERI_ACLK_HZ /PERI_HCLK_HZ ); -assert ((1 << hclk_div) *PERI_HCLK_HZ == -PERI_ACLK_HZ && (hclk_div <0x4 )); +BUG_ON (!((1 << hclk_div) *PERI_HCLK_HZ ==PERI_ACLK_HZ && (hclk_div <0x4 ))); pclk_div =ilog2 (PERI_ACLK_HZ /PERI_PCLK_HZ ); -assert ((1 << pclk_div) *PERI_PCLK_HZ == -PERI_ACLK_HZ && pclk_div <0x8 ); +BUG_ON (!((1 << pclk_div) *PERI_PCLK_HZ ==PERI_ACLK_HZ && pclk_div <0x8 )); rk_clrsetreg(&cru->cru_clksel_con[10], PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK |
@@ -252,7 +249,7 @@ static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate,if (src_clk_div >128 ) { src_clk_div =DIV_ROUND_UP (OSC_HZ /2 , freq); -assert (src_clk_div -1 <128 ); +BUG_ON (src_clk_div -1 >=128 ); mux =EMMC_SEL_24M ; }else { mux =EMMC_SEL_GPLL ;
drivers/clk/rockchip/clk_rk3288.c +14 -22
@@ -152,9 +152,7 @@ static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,debug ("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n" , (uint )pll, div->nf, div->nr, div->no, vco_hz, output_hz); -assert (vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && - output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ && - (div->no ==1 || !(div->no %2 ))); +BUG_ON (!(vco_hz >=VCO_MIN_HZ && vco_hz <=VCO_MAX_HZ && output_hz >=OUTPUT_MIN_HZ && output_hz <=OUTPUT_MAX_HZ && (div->no ==1 || !(div->no %2 ))));/* enter reset */ rk_setreg (&pll->con3,1 <<PLL_RESET_SHIFT );
@@ -374,14 +372,12 @@ static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /PD_BUS_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *PD_BUS_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f ); +BUG_ON (!((aclk_div +1 ) *PD_BUS_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f )); hclk_div =PD_BUS_ACLK_HZ /PD_BUS_HCLK_HZ -1 ; -assert ((hclk_div +1 ) *PD_BUS_HCLK_HZ == -PD_BUS_ACLK_HZ && (hclk_div <0x4 ) && (hclk_div !=0x2 )); +BUG_ON (!((hclk_div +1 ) *PD_BUS_HCLK_HZ ==PD_BUS_ACLK_HZ && (hclk_div <0x4 ) && (hclk_div !=0x2 ))); pclk_div =PD_BUS_ACLK_HZ /PD_BUS_PCLK_HZ -1 ; -assert ((pclk_div +1 ) *PD_BUS_PCLK_HZ == -PD_BUS_ACLK_HZ && pclk_div <0x7 ); +BUG_ON (!((pclk_div +1 ) *PD_BUS_PCLK_HZ ==PD_BUS_ACLK_HZ && pclk_div <0x7 )); rk_clrsetreg(&cru->cru_clksel_con[1], PD_BUS_PCLK_DIV_MASK | PD_BUS_HCLK_DIV_MASK |
@@ -396,15 +392,13 @@ static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)* set up dependent divisors for PCLK/HCLK and ACLK clocks. */ aclk_div =GPLL_HZ /PERI_ACLK_HZ -1 ; -assert ((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f ); +BUG_ON (!((aclk_div +1 ) *PERI_ACLK_HZ ==GPLL_HZ && aclk_div <0x1f )); hclk_div =ilog2 (PERI_ACLK_HZ /PERI_HCLK_HZ ); -assert ((1 << hclk_div) *PERI_HCLK_HZ == -PERI_ACLK_HZ && (hclk_div <0x4 )); +BUG_ON (!((1 << hclk_div) *PERI_HCLK_HZ ==PERI_ACLK_HZ && (hclk_div <0x4 ))); pclk_div =ilog2 (PERI_ACLK_HZ /PERI_PCLK_HZ ); -assert ((1 << pclk_div) *PERI_PCLK_HZ == -PERI_ACLK_HZ && (pclk_div <0x4 )); +BUG_ON (!((1 << pclk_div) *PERI_PCLK_HZ ==PERI_ACLK_HZ && (pclk_div <0x4 ))); rk_clrsetreg(&cru->cru_clksel_con[10], PERI_PCLK_DIV_MASK | PERI_HCLK_DIV_MASK |
@@ -542,14 +536,12 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate,if (src_clk_div >0x3f ) { src_clk_div =DIV_ROUND_UP (OSC_HZ /2 , freq); -assert (src_clk_div <0x40 ); +BUG_ON (src_clk_div >=0x40 ); mux =EMMC_PLL_SELECT_24MHZ ; -assert ((int )EMMC_PLL_SELECT_24MHZ == - (int )MMC0_PLL_SELECT_24MHZ ); +BUG_ON ((int )EMMC_PLL_SELECT_24MHZ != (int )MMC0_PLL_SELECT_24MHZ ); }else { mux =EMMC_PLL_SELECT_GENERAL ; -assert ((int )EMMC_PLL_SELECT_GENERAL == - (int )MMC0_PLL_SELECT_GENERAL ); +BUG_ON ((int )EMMC_PLL_SELECT_GENERAL != (int )MMC0_PLL_SELECT_GENERAL ); }switch (periph) {case HCLK_EMMC :
@@ -605,7 +597,7 @@ static ulong rockchip_spi_get_clk(struct rk3288_cru *cru, uint gclk_rate,default :return -EINVAL ; } -assert (mux ==SPI0_PLL_SELECT_GENERAL ); +BUG_ON (mux !=SPI0_PLL_SELECT_GENERAL );return DIV_TO_RATE (gclk_rate, div); }
@@ -617,7 +609,7 @@ static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint gclk_rate,debug ("%s: clk_general_rate=%u\n" , __func__, gclk_rate); src_clk_div =DIV_ROUND_UP (gclk_rate, freq) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 );switch (periph) {case SCLK_SPI0 : rk_clrsetreg(&cru->cru_clksel_con[25],
@@ -660,7 +652,7 @@ static ulong rockchip_saradc_set_clk(struct rk3288_cru *cru, uint hz)int src_clk_div; src_clk_div =DIV_ROUND_UP (OSC_HZ , hz) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 ); rk_clrsetreg(&cru->cru_clksel_con[24], CLK_SARADC_DIV_CON_MASK,
@@ -766,7 +758,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)/* vop aclk source clk: cpll */ div =CPLL_HZ / rate; -assert ((div -1 <64 ) && (div * rate ==CPLL_HZ )); +BUG_ON (!((div -1 <64 ) && (div * rate ==CPLL_HZ )));switch (clk->id) {case ACLK_VOP0 :
drivers/clk/rockchip/clk_rk3328.c +3 -5
@@ -239,9 +239,7 @@ static void rkclk_set_pll(struct rk3328_cru *cru, enum rk_clk_id clk_id, postdiv2=%d, vco=%u khz, output=%u khz\n", pll_con, div->fbdiv, div->refdiv, div->postdiv1, div->postdiv2, vco_khz, output_khz); -assert (vco_khz >=VCO_MIN_KHZ && vco_khz <=VCO_MAX_KHZ && - output_khz >=OUTPUT_MIN_KHZ && output_khz <=OUTPUT_MAX_KHZ && - div->fbdiv >=PLL_DIV_MIN && div->fbdiv <=PLL_DIV_MAX ); +BUG_ON (!(vco_khz >=VCO_MIN_KHZ && vco_khz <=VCO_MAX_KHZ && output_khz >=OUTPUT_MIN_KHZ && output_khz <=OUTPUT_MAX_KHZ && div->fbdiv >=PLL_DIV_MIN && div->fbdiv <=PLL_DIV_MAX ));/* * When power on or changing PLL setting,
@@ -354,7 +352,7 @@ static ulong rk3328_i2c_set_clk(struct rk3328_cru *cru, ulong clk_id, uint hz)int src_clk_div; src_clk_div =GPLL_HZ / hz; -assert (src_clk_div -1 <127 ); +BUG_ON (src_clk_div -1 >=127 );switch (clk_id) {case SCLK_I2C0 :
@@ -496,7 +494,7 @@ static ulong rk3328_saradc_set_clk(struct rk3328_cru *cru, uint hz)int src_clk_div; src_clk_div =DIV_ROUND_UP (OSC_HZ , hz) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 ); rk_clrsetreg(&cru->clksel_con[23], CLK_SARADC_DIV_CON_MASK,
drivers/clk/rockchip/clk_rk3368.c +2 -2
@@ -377,7 +377,7 @@ static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz)int src_clk_div; src_clk_div =DIV_ROUND_UP (GPLL_HZ , hz); -assert (src_clk_div <127 ); +BUG_ON (src_clk_div >=127 );switch (clk_id) { case SCLK_SPI0 ... SCLK_SPI2:
@@ -414,7 +414,7 @@ static ulong rk3368_saradc_set_clk(struct rk3368_cru *cru, uint hz)int src_clk_div; src_clk_div =DIV_ROUND_UP (OSC_HZ , hz) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 ); rk_clrsetreg(&cru->clksel_con[25], CLK_SARADC_DIV_CON_MASK,
drivers/clk/rockchip/clk_rk3399.c +20 -31
143 lines not on this page · raw message
drivers/clk/rockchip/clk_rv1108.c +1 -1
@@ -147,7 +147,7 @@ static ulong rv1108_saradc_set_clk(struct rv1108_cru *cru, uint hz)int src_clk_div; src_clk_div =DIV_ROUND_UP (OSC_HZ , hz) -1 ; -assert (src_clk_div <128 ); +BUG_ON (src_clk_div >=128 ); rk_clrsetreg(&cru->clksel_con[22], CLK_SARADC_DIV_CON_MASK,
drivers/core/device-remove.c +4 -4
@@ -32,7 +32,7 @@ static int device_chld_unbind(struct udevice *dev)struct udevice *pos, *n;int ret, saved_ret =0 ; -assert (dev); +BUG_ON (!dev);list_for_each_entry_safe (pos, n, &dev->child_head, sibling_node) { ret =device_unbind (pos);
@@ -54,7 +54,7 @@ static int device_chld_remove(struct udevice *dev, uint flags)struct udevice *pos, *n;int ret; -assert (dev); +BUG_ON (!dev);list_for_each_entry_safe (pos, n, &dev->child_head, sibling_node) { ret =device_remove (pos, flags);
@@ -80,7 +80,7 @@ int device_unbind(struct udevice *dev)return -EINVAL ; drv = dev->driver; -assert (drv); +BUG_ON (!drv);if (drv->unbind) { ret = drv->unbind (dev);
@@ -173,7 +173,7 @@ int device_remove(struct udevice *dev, uint flags)return 0 ; drv = dev->driver; -assert (drv); +BUG_ON (!drv); ret =uclass_pre_remove_device (dev);if (ret)
drivers/core/device.c +1 -1
@@ -307,7 +307,7 @@ int device_probe(struct udevice *dev)return 0 ; drv = dev->driver; -assert (drv); +BUG_ON (!drv);/* Allocate private data if requested and not reentered */ if (drv->priv_auto_alloc_size && !dev->priv) {
drivers/core/ofnode.c +12 -12
@@ -18,7 +18,7 @@int ofnode_read_u32 (ofnode node,const char *propname,u32 *outp) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));debug ("%s: %s: " , __func__, propname);if (ofnode_is_np (node)) {
@@ -42,7 +42,7 @@ int ofnode_read_u32(ofnode node, const char *propname, u32 *outp)int ofnode_read_u32_default (ofnode node,const char *propname,u32 def) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));ofnode_read_u32 (node, propname, &def);return def;
@@ -50,7 +50,7 @@ int ofnode_read_u32_default(ofnode node, const char *propname, u32 def)int ofnode_read_s32_default (ofnode node,const char *propname,s32 def) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));ofnode_read_u32 (node, propname, (u32 *)&def);return def;
@@ -60,7 +60,7 @@ bool ofnode_read_bool(ofnode node, const char *propname) {const void *prop; -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));debug ("%s: %s: " , __func__, propname); prop =ofnode_get_property (node, propname,NULL );
@@ -75,7 +75,7 @@ const char *ofnode_read_string(ofnode node, const char *propname)const char *str =NULL ;int len =-1 ; -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));debug ("%s: %s: " , __func__, propname);if (ofnode_is_np (node)) {
@@ -107,7 +107,7 @@ ofnode ofnode_find_subnode(ofnode node, const char *subnode_name) {ofnode subnode; -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));debug ("%s: %s: " , __func__, subnode_name);if (ofnode_is_np (node)) {
@@ -132,7 +132,7 @@ ofnode ofnode_find_subnode(ofnode node, const char *subnode_name)int ofnode_read_u32_array (ofnode node,const char *propname,u32 *out_values,size_t sz) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));debug ("%s: %s: " , __func__, propname);if (ofnode_is_np (node)) {
@@ -147,7 +147,7 @@ int ofnode_read_u32_array(ofnode node, const char *propname,ofnode ofnode_first_subnode (ofnode node) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));if (ofnode_is_np (node))return np_to_ofnode (node.np->child);
@@ -157,7 +157,7 @@ ofnode ofnode_first_subnode(ofnode node)ofnode ofnode_next_subnode (ofnode node) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));if (ofnode_is_np (node))return np_to_ofnode (node.np->sibling);
@@ -167,7 +167,7 @@ ofnode ofnode_next_subnode(ofnode node)const char *ofnode_get_name (ofnode node) { -assert (ofnode_valid (node)); +BUG_ON (!ofnode_valid (node));if (ofnode_is_np (node))return strrchr (node.np->full_name,'/' ) +1 ;
@@ -271,7 +271,7 @@ int ofnode_read_string_count(ofnode node, const char *property)static void ofnode_from_fdtdec_phandle_args (struct fdtdec_phandle_args *in,struct ofnode_phandle_args *out) { -assert (OF_MAX_PHANDLE_ARGS ==MAX_PHANDLE_ARGS ); +BUG_ON (OF_MAX_PHANDLE_ARGS !=MAX_PHANDLE_ARGS ); out->node =offset_to_ofnode (in->node); out->args_count = in->args_count;memcpy (out->args, in->args,sizeof (out->args));
@@ -280,7 +280,7 @@ static void ofnode_from_fdtdec_phandle_args(struct fdtdec_phandle_args *in,static void ofnode_from_of_phandle_args (struct of_phandle_args *in,struct ofnode_phandle_args *out) { -assert (OF_MAX_PHANDLE_ARGS ==MAX_PHANDLE_ARGS ); +BUG_ON (OF_MAX_PHANDLE_ARGS !=MAX_PHANDLE_ARGS ); out->node =np_to_ofnode (in->np); out->args_count = in->args_count;memcpy (out->args, in->args,sizeof (out->args));
drivers/core/uclass.c +2 -2
@@ -371,7 +371,7 @@ int uclass_get_device_tail(struct udevice *dev, int ret, struct udevice **devp)if (ret)return ret; -assert (dev); +BUG_ON (!dev); ret =device_probe (dev);if (ret)return ret;
@@ -569,7 +569,7 @@ int uclass_resolve_seq(struct udevice *dev)int seq;int ret; -assert (dev->seq ==-1 ); +BUG_ON (dev->seq !=-1 ); ret =uclass_find_device_by_seq (dev->uclass->uc_drv->id, dev->req_seq, false, &dup);if (!ret) {
drivers/gpio/gpio-uclass.c +1 -1
@@ -480,7 +480,7 @@ const char *gpio_get_bank_info(struct udevice *dev, int *bit_count)/* Must be called on an active device */ priv =dev_get_uclass_priv (dev); -assert (priv); +BUG_ON (!priv); *bit_count = priv->gpio_count;return priv->bank_name;
drivers/i2c/i2c-uclass.c +1 -1
@@ -51,7 +51,7 @@ static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset, msg->buf = offset_buf;if (!chip->offset_len)return -EADDRNOTAVAIL ; -assert (chip->offset_len <=I2C_MAX_OFFSET_LEN ); +BUG_ON (chip->offset_len >I2C_MAX_OFFSET_LEN ); offset_len = chip->offset_len;while (offset_len--) *offset_buf++ = offset >> (8 * offset_len);
drivers/input/input.c +2 -2
@@ -248,7 +248,7 @@ static struct input_key_xlate *process_modifier(struct input_config *config,int i;/* Start with the main table, and see what modifiers change it */ -assert (config->num_tables >0 ); +BUG_ON (0 >= config->num_tables); table = &config->table[0 ];for (i =1 ; i < config->num_tables; i++) {struct input_key_xlate *tab = &config->table[i];
@@ -356,7 +356,7 @@ static int sort_array_by_ordering(int *dest, int count, int *order,if (array_search (order, ocount, temp[i]) ==-1 ) dest[dest_count++] = temp[i]; } -assert (dest_count == count); +BUG_ON (dest_count != count);return same; }
drivers/input/key_matrix.c +1 -1
@@ -184,7 +184,7 @@ int key_matrix_init(struct key_matrix *config, int rows, int cols, config->num_cols = cols; config->key_count = rows * cols; config->ghost_filter = ghost_filter; -assert (config->key_count >0 ); +BUG_ON (0 >= config->key_count);return 0 ; }
drivers/misc/cros_ec.c +5 -5
@@ -308,7 +308,7 @@ static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd,debug ("%s: len=%d, din=%p\n" , __func__, len, din);if (dinp) {/* If we have any data to return, it must be 64bit-aligned */ -assert (len <=0 || !((uintptr_t )din &7 )); +BUG_ON (!(len <=0 || !((uintptr_t )din &7 ))); *dinp = din; }
@@ -338,7 +338,7 @@ static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,uint8_t *in_buffer;int len; -assert ((din_len ==0 ) || din); +BUG_ON (!((din_len ==0 ) || din)); len =ec_command_inptr (dev, cmd, cmd_version, dout, dout_len, &in_buffer, din_len);if (len >0 ) {
@@ -347,7 +347,7 @@ static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,* disregard the result. */ if (din && in_buffer) { -assert (len <= din_len); +BUG_ON (len > din_len);memmove (din, in_buffer, len); } }
@@ -756,7 +756,7 @@ static int cros_ec_flash_write_block(struct cros_ec_dev *dev, p->offset = offset; p->size = size; -assert (data && p->size <=EC_FLASH_WRITE_VER0_SIZE ); +BUG_ON (!(data && p->size <=EC_FLASH_WRITE_VER0_SIZE ));memcpy (p +1 , data, p->size); ret = ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
@@ -787,7 +787,7 @@ static int cros_ec_flash_write_burst_size(struct cros_ec_dev *dev)*/ static int cros_ec_data_is_erased (const uint32_t *data,int size) { -assert (!(size &3 )); +BUG_ON ((size &3 )); size /=sizeof (uint32_t );for (; size >0 ; size -=4 , data++)if (*data !=-1U )
drivers/misc/cros_ec_i2c.c +2 -2
@@ -135,8 +135,8 @@ static int cros_ec_i2c_command(struct udevice *udev, uint8_t cmd,debug ("%s: Cannot receive %d bytes\n" , __func__, din_len);return -1 ; } -assert (dout_len >=0 ); -assert (dinp); +BUG_ON (0 > dout_len); +BUG_ON (!dinp); i2c_msg[0 ].addr = chip->chip_addr; i2c_msg[0 ].len = out_bytes;
drivers/mtd/nand/tegra_nand.c +1 -1
@@ -259,7 +259,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,/* Emulate NAND_CMD_READOOB */ if (command ==NAND_CMD_READOOB ) { -assert (mtd->writesize !=0 ); +BUG_ON (mtd->writesize ==0 ); column += mtd->writesize; command =NAND_CMD_READ0 ; }
drivers/mtd/spi/sandbox.c +2 -2
@@ -138,7 +138,7 @@ static int sandbox_sf_probe(struct udevice *dev)if (!pdata->filename) {struct sandbox_state *state =state_get_current (); -assert (bus->seq !=-1 ); +BUG_ON (bus->seq ==-1 );if (bus->seq <CONFIG_SANDBOX_SPI_MAX_BUS ) spec = state->spi[bus->seq][cs].spec;if (!spec) {
@@ -416,7 +416,7 @@ static int sandbox_sf_xfer(struct udevice *dev, unsigned int bitlen, cnt = bytes - pos;debug (" tx: read(%u)\n" , cnt); -assert (tx); +BUG_ON (!tx); ret =os_read (sbsf->fd, tx + pos, cnt);if (ret <0 ) {puts ("sandbox_sf: os_read() failed\n" );
drivers/net/fsl-mc/mc.c +1 -1
@@ -591,7 +591,7 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)struct mc_ccsr_registers __iomem *mc_ccsr_regs =MC_CCSR_BASE_ADDR ;dmb (); -assert (timeout_ms >0 ); +BUG_ON (0 >= timeout_ms);for (;;) {udelay (1000 );/* throttle polling */ reg_gsr =in_le32 (&mc_ccsr_regs->reg_gsr);
drivers/phy/phy-uclass.c +1 -1
@@ -44,7 +44,7 @@ int generic_phy_get_by_index(struct udevice *dev, int index,debug ("%s(dev=%p, index=%d, phy=%p)\n" , __func__, dev, index, phy); -assert (phy); +BUG_ON (!phy); phy->dev =NULL ; ret =dev_read_phandle_with_args (dev,"phys" ,"#phy-cells" ,0 , index, &args);
drivers/power/tps6586x.c +2 -2
@@ -151,7 +151,7 @@ int tps6586x_set_pwm_mode(int mask)uchar val;int ret; -assert (tps6586x_dev); +BUG_ON (!tps6586x_dev); ret =tps6586x_read (PFM_MODE );if (ret !=-1 ) { val = (uchar )ret;
@@ -172,7 +172,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,int sm0, sm1;int bad; -assert (tps6586x_dev); +BUG_ON (!tps6586x_dev);/* get current voltage settings */ if (read_voltages (&sm0, &sm1)) {
drivers/rtc/rtc-uclass.c +5 -5
@@ -14,7 +14,7 @@ int dm_rtc_get(struct udevice *dev, struct rtc_time *time) {struct rtc_ops *ops =rtc_get_ops (dev); -assert (ops); +BUG_ON (!ops);if (!ops->get)return -ENOSYS ;return ops->get (dev, time);
@@ -24,7 +24,7 @@ int dm_rtc_set(struct udevice *dev, struct rtc_time *time) {struct rtc_ops *ops =rtc_get_ops (dev); -assert (ops); +BUG_ON (!ops);if (!ops->set)return -ENOSYS ;return ops->set (dev, time);
@@ -34,7 +34,7 @@ int dm_rtc_reset(struct udevice *dev) {struct rtc_ops *ops =rtc_get_ops (dev); -assert (ops); +BUG_ON (!ops);if (!ops->reset)return -ENOSYS ;return ops->reset (dev);
@@ -44,7 +44,7 @@ int rtc_read8(struct udevice *dev, unsigned int reg) {struct rtc_ops *ops =rtc_get_ops (dev); -assert (ops); +BUG_ON (!ops);if (!ops->read8)return -ENOSYS ;return ops->read8 (dev, reg);
@@ -54,7 +54,7 @@ int rtc_write8(struct udevice *dev, unsigned int reg, int val) {struct rtc_ops *ops =rtc_get_ops (dev); -assert (ops); +BUG_ON (!ops);if (!ops->write8)return -ENOSYS ;return ops->write8 (dev, reg, val);
drivers/sound/sound.c +1 -1
@@ -15,7 +15,7 @@ void sound_create_square_wave(unsigned short *data, int size, uint32_t freq)const int period = freq ? sample / freq :0 ;const int half = period /2 ; -assert (freq); +BUG_ON (!freq);/* Make sure we don't overflow our buffer */ if (size %2 )
drivers/spi/exynos_spi.c +3 -3
@@ -86,7 +86,7 @@ static void spi_request_bytes(struct exynos_spi *regs, int count, int step)writel (0 , ®s->swap_cfg); } -assert (count && count < (1 <<16 )); +BUG_ON (!(count && count < (1 <<16 )));setbits_le32 (®s->ch_cfg,SPI_CH_RST );clrbits_le32 (®s->ch_cfg,SPI_CH_RST );
@@ -183,7 +183,7 @@ static int spi_rx_tx(struct exynos_spi_priv *priv, int todo,* and make sure that we transmit dummy bytes too, to * keep things going. */ -assert (!out_bytes); +BUG_ON (out_bytes); out_bytes = in_bytes; toread = in_bytes; txp =NULL ;
@@ -355,7 +355,7 @@ static int exynos_spi_xfer(struct udevice *dev, unsigned int bitlen,if ((flags &SPI_XFER_END ) && !(priv->mode &SPI_SLAVE )) {spi_cs_deactivate (dev);if (priv->skip_preamble) { -assert (!priv->skip_preamble); +BUG_ON (priv->skip_preamble);debug ("Failed to complete premable transaction\n" ); ret =-1 ; }
drivers/usb/emul/sandbox_flash.c +1 -1
@@ -222,7 +222,7 @@ static void setup_response(struct sandbox_flash_priv *priv, void *resp, csw->dCSWDataResidue =0 ; csw->bCSWStatus =CSWSTATUS_GOOD ; -assert (!resp || resp == priv->buff); +BUG_ON (!(!resp || resp == priv->buff)); priv->buff_used = size; }
drivers/usb/host/usb-uclass.c +2 -2
@@ -211,7 +211,7 @@ static void usb_scan_bus(struct udevice *bus, bool recurse) priv =dev_get_uclass_priv (bus); -assert (recurse);/* TODO: Support non-recusive */ +BUG_ON (!recurse);/* TODO: Support non-recusive */ printf ("scanning bus %d for devices... " , bus->seq);debug ("\n" );
@@ -744,7 +744,7 @@ struct udevice *usb_get_bus(struct udevice *dev) bus = bus->parent;if (!bus) {/* By design this cannot happen */ -assert (bus); +BUG_ON (!bus);debug ("USB HUB '%s' does not have a controller\n" , dev->name); }
drivers/video/stb_truetype.h +1 -1
@@ -417,7 +417,7 @@ int main(int arg, char **argv)#ifndef STBTT_assert#include <assert.h> -#define STBTT_assert (x) assert(x) +#define STBTT_assert (x) BUG_ON(!x)#endif #ifndef STBTT_strlen
fs/ext4/dev.c +1 -1
@@ -38,7 +38,7 @@ static disk_partition_t *part_info;void ext4fs_set_blk_dev (struct blk_desc *rbdd,disk_partition_t *info) { -assert (rbdd->blksz == (1 << rbdd->log2blksz)); +BUG_ON (rbdd->blksz != (1 << rbdd->log2blksz)); ext4fs_blk_desc = rbdd;get_fs ()->dev_desc = rbdd; part_info = info;
fs/ext4/ext4_common.c +1 -1
@@ -431,7 +431,7 @@ uint16_t ext4fs_checksum_update(uint32_t i) crc =ext2fs_crc16 (crc, &le32_i,sizeof (le32_i)); crc =ext2fs_crc16 (crc, desc, offset); offset +=sizeof (desc->bg_checksum);/* skip checksum */ -assert (offset ==sizeof (*desc)); +BUG_ON (offset !=sizeof (*desc));if (offset < fs->gdsize) { crc =ext2fs_crc16 (crc, (__u8 *)desc + offset, fs->gdsize - offset);
fs/ext4/ext4_journal.c +1 -1
@@ -191,7 +191,7 @@ int ext4fs_put_metadata(char *metadata_buffer, uint32_t blknr)return -EINVAL ; }if (dirty_block_ptr[gd_index]->buf) -assert (dirty_block_ptr[gd_index]->blknr == blknr); +BUG_ON (dirty_block_ptr[gd_index]->blknr != blknr);else dirty_block_ptr[gd_index]->buf =zalloc (fs->blksz);
fs/fat/fat.c +1 -1
@@ -705,7 +705,7 @@ static void fat_itr_child(fat_itr *itr, fat_itr *parent)fsdata *mydata = parent->fsdata;/* for silly macros */ unsigned clustnum =START (parent->dent); -assert (fat_itr_isdir (parent)); +BUG_ON (!fat_itr_isdir (parent)); itr->fsdata = parent->fsdata;if (clustnum >0 ) {
include/dm/ofnode.h +1 -3
@@ -157,9 +157,7 @@ static inline bool ofnode_is_np(ofnode node)* Check our assumption that flat tree offsets are not used when a * live tree is in use. */ -assert (!ofnode_valid (node) || - (of_live_active () ?_ofnode_to_np (node) - :_ofnode_to_np (node))); +BUG_ON (!(!ofnode_valid (node) || (of_live_active () ?_ofnode_to_np (node) :_ofnode_to_np (node))));#endif return of_live_active () &&ofnode_valid (node); }
include/efi_loader.h +6 -6
@@ -25,7 +25,7 @@ const char *__efi_nesting_dec(void);* Enter the u-boot world from UEFI: */ #define EFI_ENTRY (format, ...) do { \ - assert(__efi_entry_check()); \ + BUG_ON(!__efi_entry_check()); \ debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \ __func__, ##__VA_ARGS__); \ } while(0)
@@ -37,7 +37,7 @@ const char *__efi_nesting_dec(void);typeof (ret) _r = ret; \debug ("%sEFI: Exit: %s: %u\n" ,__efi_nesting_dec (), \ __func__, (u32)((uintptr_t ) _r & ~EFI_ERROR_MASK )); \ -assert (__efi_exit_check ()); \ +BUG_ON (!__efi_exit_check ()); \ _r; \ })
@@ -46,9 +46,9 @@ const char *__efi_nesting_dec(void);*/ #define EFI_CALL (exp) ({ \ debug("%sEFI: Call: %s\n", __efi_nesting_inc(), #exp); \ - assert(__efi_exit_check()); \ + BUG_ON(!__efi_exit_check()); \ typeof(exp) _r = exp; \ - assert(__efi_entry_check()); \ + BUG_ON(!__efi_entry_check()); \ debug("%sEFI: %lu returned by %s\n", __efi_nesting_dec(), \ (unsigned long)((uintptr_t)_r & ~EFI_ERROR_MASK), #exp); \ _r; \
@@ -59,9 +59,9 @@ const char *__efi_nesting_dec(void);*/ #define EFI_CALL_VOID (exp) do { \ debug("%sEFI: Call: %s\n", __efi_nesting_inc(), #exp); \ - assert(__efi_exit_check()); \ + BUG_ON(!__efi_exit_check()); \ exp; \ - assert(__efi_entry_check()); \ + BUG_ON(!__efi_entry_check()); \ debug("%sEFI: Return From: %s\n", __efi_nesting_dec(), #exp); \ } while(0)
lib/circbuf.c +8 -8
@@ -13,12 +13,12 @@int buf_init (circbuf_t * buf,unsigned int size) { -assert (buf !=NULL ); +BUG_ON (buf ==NULL ); buf->size =0 ; buf->totalsize = size; buf->data = (char *)malloc (sizeof (char ) * size); -assert (buf->data !=NULL ); +BUG_ON (buf->data ==NULL ); buf->top = buf->data; buf->tail = buf->data;
@@ -29,8 +29,8 @@ int buf_init (circbuf_t * buf, unsigned int size)int buf_free (circbuf_t * buf) { -assert (buf !=NULL ); -assert (buf->data !=NULL ); +BUG_ON (buf ==NULL ); +BUG_ON (buf->data ==NULL );free (buf->data);memset (buf,0 ,sizeof (circbuf_t));
@@ -43,8 +43,8 @@ int buf_pop (circbuf_t * buf, char *dest, unsigned int len)unsigned int i;char *p; -assert (buf !=NULL ); -assert (dest !=NULL ); +BUG_ON (buf ==NULL ); +BUG_ON (dest ==NULL ); p = buf->top;
@@ -73,8 +73,8 @@ int buf_push (circbuf_t * buf, const char *src, unsigned int len)unsigned int i;char *p; -assert (buf !=NULL ); -assert (src !=NULL ); +BUG_ON (buf ==NULL ); +BUG_ON (src ==NULL ); p = buf->tail;
lib/efi_loader/efi_boottime.c +1 -1
@@ -62,7 +62,7 @@ int __efi_entry_check(void) {int ret = entry_count++ ==0 ;#ifdef CONFIG_ARM -assert (efi_gd); +BUG_ON (!efi_gd); app_gd = gd; gd = efi_gd;#endif
lib/efi_loader/efi_device_path.c +1 -1
@@ -507,7 +507,7 @@ struct efi_device_path *efi_dp_from_eth(void)void *buf, *start;unsigned dpsize =0 ; -assert (eth_get_dev ()); +BUG_ON (!eth_get_dev ());#ifdef CONFIG_DM_ETH dpsize +=dp_size (eth_get_dev ());
lib/efi_loader/efi_file.c +1 -1
@@ -249,7 +249,7 @@ static efi_status_t dir_read(struct file_handle *fh, u64 *buffer_size,unsigned int required_size;if (!fh->dirs) { -assert (fh->offset ==0 ); +BUG_ON (fh->offset !=0 ); fh->dirs =fs_opendir (fh->path);if (!fh->dirs)return EFI_DEVICE_ERROR ;
lib/efi_loader/efi_memory.c +1 -1
@@ -385,7 +385,7 @@ efi_status_t efi_free_pool(void *buffer) alloc = container_of(buffer, struct efi_pool_allocation, data);/* Sanity check, was the supplied address returned by allocate_pool */ -assert (((uintptr_t )alloc &EFI_PAGE_MASK ) ==0 ); +BUG_ON (((uintptr_t )alloc &EFI_PAGE_MASK ) !=0 ); r =efi_free_pages ((uintptr_t )alloc, alloc->num_pages);
lib/fdtdec.c +4 -4
@@ -76,7 +76,7 @@ static const char * const compat_names[COMPAT_COUNT] = {const char *fdtdec_get_compatible (enum fdt_compat_id id) {/* We allow reading of the 'unknown' ID for testing purposes */ -assert (id >=0 && id <COMPAT_COUNT ); +BUG_ON (!(id >=0 && id <COMPAT_COUNT ));return compat_names[id]; }
@@ -376,7 +376,7 @@ int fdtdec_next_alias(const void *blob, const char *name,int node, err;/* snprintf() is not available */ -assert (strlen (name) <MAX_STR_LEN ); +BUG_ON (strlen (name) >=MAX_STR_LEN );sprintf (str,"%.*s%d" ,MAX_STR_LEN , name, *upto); node =fdt_path_offset (blob, str);if (node <0 )
@@ -503,7 +503,7 @@ int fdtdec_add_aliases_for_id(const void *blob, const char *name,if (j == maxcount)break ; -assert (!node_list[i]); +BUG_ON (node_list[i]); node_list[i] = nodes[j++];if (i >= num_found) num_found = i +1 ;
@@ -583,7 +583,7 @@ int fdtdec_check_fdt(void)* FDT (prior to console ready) will need to make their own * arrangements and do their own checks. */ -assert (!fdtdec_prepare_fdt ()); +BUG_ON (fdtdec_prepare_fdt ());return 0 ; }
lib/membuff.c +2 -2
@@ -25,7 +25,7 @@ static int membuff_putrawflex(struct membuff *mb, int maxlen, bool update,int len;/* always write to 'mb->head' */ -assert (data && offsetp); +BUG_ON (!(data && offsetp)); *data = &mb->start; *offsetp = mb->head - mb->start;
@@ -330,7 +330,7 @@ int membuff_extend_by(struct membuff *mb, int by, int max)char *ptr;/* double the buffer size until it is big enough */ -assert (by >=0 ); +BUG_ON (0 > by);for (orig = mb->end - mb->start, size = orig; size < orig + by;) size *=2 ;if (max !=-1 )
lib/physmem.c +2 -2
@@ -16,7 +16,7 @@ phys_addr_t __weak arch_phys_memset(phys_addr_t s, int c, phys_size_t n) {void *s_ptr = (void *)(uintptr_t )s; -assert (((phys_addr_t )(uintptr_t )s) == s); -assert (((phys_addr_t)(uintptr_t)(s + n)) == s + n); +BUG_ON (((phys_addr_t )(uintptr_t )s) != s); +BUG_ON (((phys_addr_t)(uintptr_t)(s + n)) != s + n);return (phys_addr_t )(uintptr_t )memset (s_ptr, c, n); }
lib/qsort.c +1 -1
@@ -28,7 +28,7 @@ void qsort(void *base,char tmp;if ((nel >1 ) && (width >0 )) { -assert (nel <= ((size_t )(-1 )) / width);/* check for overflow */ +BUG_ON (nel > ((size_t )(-1 )) / width);/* check for overflow */ wgap =0 ; do { wgap = 3 * wgap + 1;
lib/slre.c +4 -4
@@ -165,7 +165,7 @@ slre_dump(const struct slre *r, FILE *fp)static void set_jump_offset (struct slre *r,int pc,int offset) { -assert (offset < r->code_size); +BUG_ON (offset >= r->code_size);if (r->code_size - offset >0xff ) r->err_str ="Jump offset is too big" ;
@@ -507,8 +507,8 @@ match(const struct slre *r, int pc, const char *s, int len,while (res && r->code[pc] !=END ) { -assert (pc < r->code_size); -assert (pc < (int ) (sizeof (r->code) /sizeof (r->code[0 ]))); +BUG_ON (pc >= r->code_size); +BUG_ON (pc >= (int )(sizeof (r->code) /sizeof (r->code[0 ])));switch (r->code[pc]) {case BRANCH :
@@ -635,7 +635,7 @@ match(const struct slre *r, int pc, const char *s, int len,break ;default :printf ("unknown cmd (%d) at %d\n" , r->code[pc], pc); -assert (0 ); +BUG_ON (!0 );break ; } }
net/eth-uclass.c +1 -1
@@ -42,7 +42,7 @@ static struct eth_uclass_priv *eth_get_uclass_priv(void)struct uclass *uc;uclass_get (UCLASS_ETH , &uc); -assert (uc); +BUG_ON (!uc);return uc->priv; }
net/eth_legacy.c +1 -1
@@ -187,7 +187,7 @@ int eth_register(struct eth_device *dev)struct eth_device *d;static int index; -assert (strlen (dev->name) <sizeof (dev->name)); +BUG_ON (strlen (dev->name) >=sizeof (dev->name));if (!eth_devices) { eth_devices = dev;
net/net.c +1 -1
@@ -784,7 +784,7 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, int sport,int pkt_hdr_size;/* make sure the net_tx_packet is initialized (net_init() was called) */ -assert (net_tx_packet !=NULL ); +BUG_ON (net_tx_packet ==NULL );if (net_tx_packet ==NULL )return -1 ;
test/command_ut.c +15 -15
@@ -19,16 +19,16 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])/* commands separated by \n */ run_command_list ("setenv list 1\n setenv list ${list}1" ,-1 ,0 ); -assert (!strcmp ("11" ,env_get ("list" ))); +BUG_ON (strcmp ("11" ,env_get ("list" )));/* command followed by \n and nothing else */ run_command_list ("setenv list 1${list}\n" ,-1 ,0 ); -assert (!strcmp ("111" ,env_get ("list" ))); +BUG_ON (strcmp ("111" ,env_get ("list" )));/* a command string with \0 in it. Stuff after \0 should be ignored */ run_command ("setenv list" ,0 );run_command_list (test_cmd,sizeof (test_cmd),0 ); -assert (!strcmp ("123" ,env_get ("list" ))); +BUG_ON (strcmp ("123" ,env_get ("list" )));/* * a command list where we limit execution to only the first command
@@ -36,26 +36,26 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])*/ run_command_list ("setenv list 1\n setenv list ${list}2; " "setenv list ${list}3" ,strlen ("setenv list 1" ),0 ); -assert (!strcmp ("1" ,env_get ("list" ))); +BUG_ON (strcmp ("1" ,env_get ("list" ))); -assert (run_command ("false" ,0 ) ==1 ); -assert (run_command ("echo" ,0 ) ==0 ); -assert (run_command_list ("false" ,-1 ,0 ) ==1 ); -assert (run_command_list ("echo" ,-1 ,0 ) ==0 ); +BUG_ON (run_command ("false" ,0 ) !=1 ); +BUG_ON (run_command ("echo" ,0 ) !=0 ); +BUG_ON (run_command_list ("false" ,-1 ,0 ) !=1 ); +BUG_ON (run_command_list ("echo" ,-1 ,0 ) !=0 );#ifdef CONFIG_HUSH_PARSER run_command ("setenv foo 'setenv black 1\nsetenv adder 2'" ,0 );run_command ("run foo" ,0 ); -assert (env_get ("black" ) !=NULL ); -assert (!strcmp ("1" ,env_get ("black" ))); -assert (env_get ("adder" ) !=NULL ); -assert (!strcmp ("2" ,env_get ("adder" ))); +BUG_ON (env_get ("black" ) ==NULL ); +BUG_ON (strcmp ("1" ,env_get ("black" ))); +BUG_ON (env_get ("adder" ) ==NULL ); +BUG_ON (strcmp ("2" ,env_get ("adder" )));#endif -assert (run_command ("" ,0 ) ==0 ); -assert (run_command (" " ,0 ) ==0 ); +BUG_ON (run_command ("" ,0 ) !=0 ); +BUG_ON (run_command (" " ,0 ) !=0 ); -assert (run_command ("'" ,0 ) ==1 ); +BUG_ON (run_command ("'" ,0 ) !=1 );printf ("%s: Everything went swimmingly\n" , __func__);return 0 ;
test/compression.c +8 -8
@@ -156,8 +156,8 @@ static int compress_using_bzip2(void *in, unsigned long in_size, unsigned long *out_size) {/* There is no bzip2 compression in u-boot, so fake it. */ -assert (in_size ==strlen (plain)); -assert (memcmp (plain, in, in_size) ==0 ); +BUG_ON (in_size !=strlen (plain)); +BUG_ON (memcmp (plain, in, in_size) !=0 );if (bzip2_compressed_size > out_max)return -1 ;
@@ -189,8 +189,8 @@ static int compress_using_lzma(void *in, unsigned long in_size, unsigned long *out_size) {/* There is no lzma compression in u-boot, so fake it. */ -assert (in_size ==strlen (plain)); -assert (memcmp (plain, in, in_size) ==0 ); +BUG_ON (in_size !=strlen (plain)); +BUG_ON (memcmp (plain, in, in_size) !=0 );if (lzma_compressed_size > out_max)return -1 ;
@@ -221,8 +221,8 @@ static int compress_using_lzo(void *in, unsigned long in_size, unsigned long *out_size) {/* There is no lzo compression in u-boot, so fake it. */ -assert (in_size ==strlen (plain)); -assert (memcmp (plain, in, in_size) ==0 ); +BUG_ON (in_size !=strlen (plain)); +BUG_ON (memcmp (plain, in, in_size) !=0 );if (lzo_compressed_size > out_max)return -1 ;
@@ -254,8 +254,8 @@ static int compress_using_lz4(void *in, unsigned long in_size, unsigned long *out_size) {/* There is no lz4 compression in u-boot, so fake it. */ -assert (in_size ==strlen (plain)); -assert (memcmp (plain, in, in_size) ==0 ); +BUG_ON (in_size !=strlen (plain)); +BUG_ON (memcmp (plain, in, in_size) !=0 );if (lz4_compressed_size > out_max)return -1 ;
test/print_ut.c +21 -21
77 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 4/5 treewide: convert assert() to BUG_ON()
Hi Masahiro,
Quoted 6 lines · Masahiro Yamada
We do not need multiple ways to do the same thing. Instead of
assert(), useBUG_ON()from Linux. The logic is opposite, but Coccinelle is of great help for such a conversion. We could simply convert assert(x) toBUG_ON(!x)for all expressions "x", but I did a bit better job by converting assert(a == b) toBUG_ON(a != b), etc.
My reading of BUG_ON() is that it does not compile to nothing when DEBUG is not set, unlike assert(). So they do not seem to be equivalent.
Regards,
Simon
PATCH 4/5 treewide: convert assert() to BUG_ON()
Hi Simon,
2017-11-29 22:08 GMT+09:00 Simon Glass <[email protected]>:
Quoted 11 lines
Hi Masahiro,
Quoted 6 lines · Masahiro Yamada
We do not need multiple ways to do the same thing. Instead of
assert(), useBUG_ON()from Linux. The logic is opposite, but Coccinelle is of great help for such a conversion. We could simply convert assert(x) toBUG_ON(!x)for all expressions "x", but I did a bit better job by converting assert(a == b) toBUG_ON(a != b), etc.
Quoted 4 lines
My reading of
BUG_ON()is that it does not compile to nothing when DEBUG is not set, unlikeassert(). So they do not seem to be equivalent.
Tom suggested to add an option to make BUG_ON() to nothing by default:
https://patchwork.ozlabs.org/cover/842165/
With the option, they will be equivalent.
Signature · 2 lines
Best Regards Masahiro Yamada
PATCH 4/5 treewide: convert assert() to BUG_ON()
Quoted 21 lines · Masahiro Yamada
Hi Simon,
2017-11-29 22:08 GMT+09:00 Simon Glass <[email protected]>:
Quoted 11 lines
Hi Masahiro,
Quoted 6 lines · Masahiro Yamada
We do not need multiple ways to do the same thing. Instead of
assert(), useBUG_ON()from Linux. The logic is opposite, but Coccinelle is of great help for such a conversion. We could simply convert assert(x) toBUG_ON(!x)for all expressions "x", but I did a bit better job by converting assert(a == b) toBUG_ON(a != b), etc.Quoted 4 lines
My reading of
BUG_ON()is that it does not compile to nothing when DEBUG is not set, unlikeassert(). So they do not seem to be equivalent.
Quoted 4 lines
Tom suggested to add an option to make
BUG_ON()to nothing by default:
https://patchwork.ozlabs.org/cover/842165/With the option, they will be equivalent.
PATCH 5/5 Remove assert()
In reply to Masahiro YamadaNo more users of assert() except host tools. Remove.
---
include/common.h | 15 --------------- lib/tiny-printf.c | 9 --------- lib/vsprintf.c | 9 --------- 3 files changed, 33 deletions(-)
include/common.h +0 -15
@@ -76,21 +76,6 @@ typedef volatile unsigned char vu_char; #define warn_non_spl(fmt, args...) \ debug_cond(!_SPL_BUILD, fmt, ##args) -/* -* An assertion is run-time check done in debug mode only. If DEBUG is not -* defined then it is skipped. If DEBUG is defined and the assertion fails, -* then it calls panic*( which may or may not reset/halt U-Boot (see -* CONFIG_PANIC_HANG), It is hoped that all failing assertions are found -* before release, and after release it is hoped that they don't matter. But -* in any case these failing assertions cannot be fixed with a reset (which -* may just do the same assertion again). -*/ -void __assert_fail (const char *assertion,const char *file,unsigned line, -const char *function); -#define assert (x) \ - ({ if (!(x) && _DEBUG) \ - __assert_fail(#x, __FILE__, __LINE__, __func__); }) -typedef void (interrupt_handler_t )(void *);#include <asm/u-boot.h> /* boot information for Linux kernel */
lib/tiny-printf.c +0 -9
@@ -381,12 +381,3 @@ int snprintf(char *buf, size_t size, const char *fmt, ...)return ret; } - -void __assert_fail (const char *assertion,const char *file,unsigned line, -const char *function) -{ -/* This will not return */ -printf ("%s:%u: %s: Assertion `%s' failed." , file, line, function, - assertion); -hang (); -}
lib/vsprintf.c +0 -9
@@ -789,15 +789,6 @@ int vprintf(const char *fmt, va_list args)return i; } - -void __assert_fail (const char *assertion,const char *file,unsigned line, -const char *function) -{ -/* This will not return */ -panic ("%s:%u: %s: Assertion `%s' failed." , file, line, function, - assertion); -} -char *simple_itoa (ulong i) {/* 21 digits plus null terminator, good for 64-bit or smaller ints */
Signature · 1 line
2.7.4
cover Remove assert()
In reply to Masahiro YamadaQuoted 9 lines · Masahiro Yamada
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()
Have you done a size check on this series? If not, I'll fire one up, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/f4872fb7/attachment.sig>
cover Remove assert()
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()
Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/
Looks like the NAND core pull-request needs it, too.
Signature · 2 lines
Best Regards Masahiro Yamada
cover Remove assert()
Quoted 17 lines · Masahiro Yamada
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
Quoted 6 lines
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/Looks like the NAND core pull-request needs it, too.
So, in my testing (which is gcc-6 for everything thanks to Debian/9):
06: Remove assert()
arm: + clearfog peach-pi snow smdk5250 smdk5420 turris_omnia spring omap3_evm peach-pit
-(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 760 bytes +(clearfog,turris_omnia) arm-linux-gnueabihf-ld.bfd: SPL image too big
+(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region .sram' overflowed by 1080 bytes +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) arch/arm/mach-exynos/built-in.o: In function clock_calc_best_scalar':
+(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) build/../arch/arm/mach-exynos/clock.c:1408: undefined reference to panic' +(omap3_evm) arm-linux-gnueabihf-ld.bfd: region .sram' overflowed by 28 bytes
And then a lot of platforms grow in size. Taking a harder peek, BUG_ON is always set. However, assert() is only set when DEBUG is set. Now, I can certainly see an argument along the lines of that being fairly unexpected, and I don't know that I would disagree.
After a very quick look over what git grep -l says, perhaps we want to introduce a new (default off) option to preserve the current behavior of assert() in BUG_ON, as it looks like almost only kernel imported code is using BUG_ON.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/661bb1e3/attachment.sig>
cover Remove assert()
2017-11-29 10:42 GMT+09:00 Tom Rini <[email protected]>:
Quoted 40 lines · Masahiro Yamada
Quoted 17 lines
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
Quoted 6 lines
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/Looks like the NAND core pull-request needs it, too.
So, in my testing (which is gcc-6 for everything thanks to Debian/9):
06: Removeassert()
arm: + clearfog peach-pi snow smdk5250 smdk5420turris_omniaspringomap3_evmpeach-pit(quoted diff) +5
-1-(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 760 bytes +(clearfog,turris_omnia) arm-linux-gnueabihf-ld.bfd: SPL image too big +(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 1080 bytes +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) arch/arm/mach-exynos/built-in.o: In function `clock_calc_best_scalar': +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) build/../arch/arm/mach-exynos/clock.c:1408: undefined reference to `panic' +(omap3_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 28 bytesAnd then a lot of platforms grow in size. Taking a harder peek,
BUG_ONis always set. However,assert()is only set when DEBUG is set. Now, I can certainly see an argument along the lines of that being fairly unexpected, and I don't know that I would disagree.
Quoted 5 lines
After a very quick look over what git grep -l says, perhaps we want to introduce a new (default off) option to preserve the current behavior of
assert()inBUG_ON, as it looks like almost only kernel imported code is usingBUG_ON.
Do you have an idea for the option name?
Signature · 2 lines
Best Regards Masahiro Yamada
cover Remove assert()
Quoted 41 lines · Masahiro Yamada
2017-11-29 10:42 GMT+09:00 Tom Rini <[email protected]>:
Quoted 40 lines · Masahiro Yamada
Quoted 17 lines
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
Quoted 6 lines
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/Looks like the NAND core pull-request needs it, too.
So, in my testing (which is gcc-6 for everything thanks to Debian/9):
06: Removeassert()
arm: + clearfog peach-pi snow smdk5250 smdk5420turris_omniaspringomap3_evmpeach-pit(quoted diff) +5
-1-(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 760 bytes +(clearfog,turris_omnia) arm-linux-gnueabihf-ld.bfd: SPL image too big +(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 1080 bytes +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) arch/arm/mach-exynos/built-in.o: In function `clock_calc_best_scalar': +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) build/../arch/arm/mach-exynos/clock.c:1408: undefined reference to `panic' +(omap3_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 28 bytesAnd then a lot of platforms grow in size. Taking a harder peek,
BUG_ONis always set. However,assert()is only set when DEBUG is set. Now, I can certainly see an argument along the lines of that being fairly unexpected, and I don't know that I would disagree.
Quoted 7 lines
Quoted 5 lines
After a very quick look over what git grep -l says, perhaps we want to introduce a new (default off) option to preserve the current behavior of
assert()inBUG_ON, as it looks like almost only kernel imported code is usingBUG_ON.Do you have an idea for the option name?
ENABLE_BUG_ON_CHECKS ?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/fc4e4803/attachment.sig>
cover Remove assert()
2017-11-29 11:30 GMT+09:00 Tom Rini <[email protected]>:
Quoted 50 lines · Masahiro Yamada
Quoted 41 lines
2017-11-29 10:42 GMT+09:00 Tom Rini <[email protected]>:
Quoted 40 lines · Masahiro Yamada
Quoted 17 lines
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
Quoted 6 lines
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/Looks like the NAND core pull-request needs it, too.
So, in my testing (which is gcc-6 for everything thanks to Debian/9):
06: Removeassert()
arm: + clearfog peach-pi snow smdk5250 smdk5420turris_omniaspringomap3_evmpeach-pit(quoted diff) +5
-1-(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 760 bytes +(clearfog,turris_omnia) arm-linux-gnueabihf-ld.bfd: SPL image too big +(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 1080 bytes +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) arch/arm/mach-exynos/built-in.o: In function `clock_calc_best_scalar': +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) build/../arch/arm/mach-exynos/clock.c:1408: undefined reference to `panic' +(omap3_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 28 bytesAnd then a lot of platforms grow in size. Taking a harder peek,
BUG_ONis always set. However,assert()is only set when DEBUG is set. Now, I can certainly see an argument along the lines of that being fairly unexpected, and I don't know that I would disagree.Quoted 7 lines
Quoted 5 lines
After a very quick look over what git grep -l says, perhaps we want to introduce a new (default off) option to preserve the current behavior of
assert()inBUG_ON, as it looks like almost only kernel imported code is usingBUG_ON.Do you have an idea for the option name?
Quoted 3 lines
ENABLE_BUG_ON_CHECKS?--
Do you mean CONFIG option?
i.e. CONFIG_ENABLE_BUG_ON_CHECKS
so we can turn it on/off globally?
Signature · 2 lines
Best Regards Masahiro Yamada
cover Remove assert()
Quoted 51 lines · Masahiro Yamada
2017-11-29 11:30 GMT+09:00 Tom Rini <[email protected]>:
Quoted 50 lines · Masahiro Yamada
Quoted 48 lines
2017-11-29 10:42 GMT+09:00 Tom Rini <[email protected]>:
Quoted 40 lines · Masahiro Yamada
Quoted 17 lines
2017-11-28 23:52 GMT+09:00 Tom Rini <[email protected]>:
Quoted 12 lines · Masahiro Yamada
Quoted 10 lines
Buildman test passed.
Masahiro Yamada (5):
MoveCONFIG_PANIC_HANGtoKconfig
ARM: openrd: setCONFIG_LOGLEVELto 2
EnableCONFIG_PANIC_HANGfor boards withoutdo_reset()
treewide: convertassert()toBUG_ON()
Removeassert()Quoted 3 lines
Have you done a size check on this series? If not, I'll fire one up, thanks!
Quoted 6 lines
I think I did it correctly.
At least, I needed the following patch for openrd boards:
http://patchwork.ozlabs.org/patch/842106/Looks like the NAND core pull-request needs it, too.
So, in my testing (which is gcc-6 for everything thanks to Debian/9):
06: Removeassert()
arm: + clearfog peach-pi snow smdk5250 smdk5420turris_omniaspringomap3_evmpeach-pit(quoted diff) +5
-1-(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 760 bytes +(clearfog,turris_omnia) arm-linux-gnueabihf-ld.bfd: SPL image too big +(am335x_hs_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 1080 bytes +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) arch/arm/mach-exynos/built-in.o: In function `clock_calc_best_scalar': +(snow,smdk5250,peach-pi,smdk5420,spring,peach-pit) build/../arch/arm/mach-exynos/clock.c:1408: undefined reference to `panic' +(omap3_evm) arm-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 28 bytesAnd then a lot of platforms grow in size. Taking a harder peek,
BUG_ONis always set. However,assert()is only set when DEBUG is set. Now, I can certainly see an argument along the lines of that being fairly unexpected, and I don't know that I would disagree.Quoted 5 lines
After a very quick look over what git grep -l says, perhaps we want to introduce a new (default off) option to preserve the current behavior of
assert()inBUG_ON, as it looks like almost only kernel imported code is usingBUG_ON.Do you have an idea for the option name?
Quoted 5 lines
Quoted 1 line
ENABLE_BUG_ON_CHECKS?Do you mean CONFIG option?
i.e.CONFIG_ENABLE_BUG_ON_CHECKS
so we can turn it on/off globally?
Yes, a CONFIG option to turn it on/off.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/ad1b1fda/attachment.sig>