Skip to contentSkip to conversation

arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

PATCH New Bhaskar Upadhaya 2 participants 4 messages Nov 21, 2017 – Nov 29, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

LS1012A-2G5RDB is similar to LS1012ARDB with below features 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC QuadSPI, UART

---
 arch/arm64/boot/dts/freescale/Makefile             |  1 +
 .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 66 ++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
index 72c4b52..b3a0aec 100644
@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts new file +66 -0

66 lines not on this page · raw message

Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

Quoted 16 lines · Bhaskar Upadhaya

LS1012A-2G5RDB is similar to LS1012ARDB with below features 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC QuadSPI, UART

---
 arch/arm64/boot/dts/freescale/Makefile             |  1 +
 .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 66 ++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
arch/arm64/boot/dts/freescale/Makefile +0 -0
index 72c4b52..b3a0aec 100644

arch/arm64/boot/dts/freescale/Makefile line 4

Quoted 4 lines
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb

Please maintain the order in alphabet.

Shawn

Quoted 83 lines
arch/arm64/boot/dts/freescale/Makefile +0 -0
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts new file +66 -0
new file mode 100644
index 0000000..99b1835
@@ -0,0 +1,66 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <[email protected]>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
Signature · 7 lines
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw

PATCH 1/1 arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

-----Original Message-----
From: Shawn Guo [mailto:shawnguo at kernel.org]
Sent: Wednesday, November 29, 2017 8:58 AM
To: Bhaskar Upadhaya <[email protected]>
Cc: devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org
Subject: Re: [PATCH 1/1] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

Quoted 18 lines · Bhaskar Upadhaya

LS1012A-2G5RDB is similar to LS1012ARDB with below features 2 2.5G SGMII PFE Block, SATA, USB 2.0/3.0, WiFi, DDR, eMMC QuadSPI, UART

---
 arch/arm64/boot/dts/freescale/Makefile             |  1 +
 .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 66 ++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 

arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts

arch/arm64/boot/dts/freescale/Makefile +0 -0
index 72c4b52..b3a0aec 100644

arch/arm64/boot/dts/freescale/Makefile line 4

Quoted 4 lines
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb

Please maintain the order in alphabet.

Shawn
[Bhaskar] OK, Will keep like below

Quoted 95 lines
arch/arm64/boot/dts/freescale/Makefile +1 -0
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
 
 
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git 

a/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts new file mode 100644
index 0000000..99b1835

arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts new file +67 -1
@@ -0,0 +1,66 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <[email protected]>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this 
+dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
--

1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist
s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%7 CBhaskar.Upadhaya%40nxp.com%7C409d0e6aad364cfb981708d536d92adb%7C686ea 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636475228707650079&sdata=4GdFrz7 zM%2FVi7XrR6zjRXdbMi6XD2SABxBdtItT7zbA%3D&reserved=0

#3 lore raw

PATCH 1/1 arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

Quoted 5 lines · Bhaskar Upadhaya

[Bhaskar] OK, Will keep like below

Quoted 4 lines

dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb

'2' goes before 'f' in alphabet table, right?

Shawn