ARM: dts: Add basic devicetree for D-Link DNS-313
PATCH v2 1/1 ARM: dts: Add basic devicetree for D-Link DNS-313
This adds a basic device tree for the D-Link DNS-313 NAS enclosure.
Cc Andrew Lunn <[email protected]>
Signed-off-by Linus Walleij <[email protected]>
---
ChangeLog v1->v2:
- Fixed the unit name on the MDIO PHY.
- Add the G751 temperature sensor
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-dlink-dns-313.dts | 195 +++++++++++++++++++++++++++++ 2 files changed, 196 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-dlink-dns-313.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ + gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ gemini-sq201.dtb \
arch/arm/boot/dts/gemini-dlink-dns-313.dts new file +195 -0
195 lines not on this page · raw message
Signature · 1 line
2.14.3
PATCH v2 1/1 ARM: dts: Add basic devicetree for D-Link DNS-313
Quoted 5 lines · Linus Walleij
This adds a basic device tree for the D-Link DNS-313 NAS enclosure.
Cc Andrew Lunn <[email protected]>Signed-off-by Linus Walleij <[email protected]>
Reviewed-by Andrew Lunn <[email protected]>
Andrew