meson-tools: new Package
PATCH v2 1/4 meson-tools: new Package
all amlogic's meson based soc require a signed firmware to boot, this package provides a binary to do so.
Signed-off-by Dagg Stompler <[email protected]>
---
Changes v1 -> v2:
- drop hunk which was sent by mistake (Brauch)
- drop cross compile patch as it isn't needed (Brauch)
- refractor bins installation cmd (Thomas)
- refractor build cmd (Thomas)
- handle general mail patch rejects (Thomas)
package/Config.in.host | 1 + package/meson-tools/Config.in.host | 9 +++++++++ package/meson-tools/meson-tools.hash | 2 ++ package/meson-tools/meson-tools.mk | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/meson-tools/Config.in.host create mode 100644 package/meson-tools/meson-tools.hash create mode 100644 package/meson-tools/meson-tools.mk
package/Config.in.host +1 -0
@@ -27,6 +27,7 @@ menu "Host utilities" source "package/jsmin/Config.in.host" source "package/lpc3250loader/Config.in.host" source "package/lttng-babeltrace/Config.in.host" + source "package/meson-tools/Config.in.host" source "package/mfgtools/Config.in.host" source "package/mkpasswd/Config.in.host" source "package/mtd/Config.in.host"
package/meson-tools/Config.in.host new file +9 -0
@@ -0,0 +1,9 @@ +config BR2_PACKAGE_HOST_MESON_TOOLS + bool "host meson-tools" + help + meson-tools is a collection of tools for use with + the Amlogic Meson family of ARM based SoCs. + it allows management of signatures which are required + for booting amlogic based boards with u-boot. + + https://github.com/afaerber/meson-tools
package/meson-tools/meson-tools.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 5a956f5a6ff8c45fc79d649982287c4548a1df4f0ef9e5aa6584493d552a54a3 meson-tools-5e01cbadc6f6f21ad88a63492a83182fc4b19d37.tar.gz
package/meson-tools/meson-tools.mk new file +24 -0
@@ -0,0 +1,24 @@ +################################################################################ +# +# meson-tools +# +################################################################################ + +HOST_MESON_TOOLS_VERSION = 5e01cbadc6f6f21ad88a63492a83182fc4b19d37 +HOST_MESON_TOOLS_SITE = $(call github,afaerber,meson-tools,$(HOST_MESON_TOOLS_VERSION)) +HOST_MESON_TOOLS_LICENSE = GPL-2.0+ +HOST_MESON_TOOLS_LICENSE_FILES = COPYING README.md +HOST_MESON_TOOLS_DEPENDENCIES = host-openssl + +HOST_MESON_TOOLS_PROGS = amlbootsig unamlbootsig amlinfo + +define HOST_MESON_TOOLS_BUILD_CMDS + $(MAKE) -C $(@D) CC="$(HOSTCC)" CFLAGS="$(HOST_CFLAGS)" LDFLAGS="$(HOST_LDFLAGS) -lssl -lcrypto" +endef + +define HOST_MESON_TOOLS_INSTALL_CMDS + $(foreach f,$(HOST_MESON_TOOLS_PROGS), + $(INSTALL) -D -m 0755 $(@D)/$(f) $(HOST_DIR)/bin/$(f)) +endef + +$(eval $(host-generic-package))
Signature · 1 line
2.15.1
PATCH v2 2/4 odroidc2-ATF: new Package
the odroidc2 board requires a ATF (ARM Trusted Firmware) to boot u-boot. the ATF can be found only in the vendor's u-boot repository. this package will retrieve the needed files to sign the mainline u-boot image.
Signed-off-by Dagg Stompler <[email protected]>
---
Changes v1 -> v2:
- refractor mainline post image script by moving the ATF part to a seperate package.
- handle general mail patch rejects (Thomas)
package/Config.in.host | 1 + package/odroidc2-ATF/Config.in.host | 7 +++++++ package/odroidc2-ATF/odroidc2-ATF.hash | 2 ++ package/odroidc2-ATF/odroidc2-ATF.mk | 26 ++++++++++++++++++++++++++ 4 files changed, 36 insertions(+) create mode 100644 package/odroidc2-ATF/Config.in.host create mode 100644 package/odroidc2-ATF/odroidc2-ATF.hash create mode 100644 package/odroidc2-ATF/odroidc2-ATF.mk
package/Config.in.host +1 -0
@@ -33,6 +33,7 @@ menu "Host utilities" source "package/mtd/Config.in.host" source "package/mtools/Config.in.host" source "package/mxsldr/Config.in.host" + source "package/odroidc2-ATF/Config.in.host" source "package/omap-u-boot-utils/Config.in.host" source "package/openocd/Config.in.host" source "package/opkg-utils/Config.in.host"
package/odroidc2-ATF/Config.in.host new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_HOST_ODROIDC2_ATF + bool "host odroidc2-ATF" + help + odroidc2-ATF is a package that extracts the ATF (ARM Trusted Firmware) from hardkernel's + uboot repository and uses it to allow safe boot of mainline u-boot kernels. + + https://github.com/hardkernel/u-boot/tree/odroidc2-v2015.01
package/odroidc2-ATF/odroidc2-ATF.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 7e436e83e21819605480938dda6e366a4ccd01acbb8402997a3633e25ff2d383 odroidc2-ATF-1dad487200543c2c1d116e8b2f070fe491070432.tar.gz
package/odroidc2-ATF/odroidc2-ATF.mk new file +26 -0
@@ -0,0 +1,26 @@ +################################################################################ +# +# odroidc2-ATF +# +################################################################################ + +HOST_ODROIDC2_ATF_VERSION = 1dad487200543c2c1d116e8b2f070fe491070432 +HOST_ODROIDC2_ATF_SITE = $(call github,hardkernel,u-boot,$(HOST_ODROIDC2_ATF_VERSION)) +HOST_ODROIDC2_ATF_LICENSE = GPL-2.0 +HOST_ODROIDC2_ATF_LICENSE_FILES = COPYING COPYING.txt README +HOST_ODROIDC2_ATF_FIRMWARE_FOLDER = $(HOST_DIR)/usr/share/odroidc2_atf +HOST_ODROIDC2_ATF_FIRMWARE_FILES = sd_fuse/bl1.bin.hardkernel fip/gxb/bl30.bin fip/gxb/bl301.bin fip/gxb/bl31.bin fip/gxb/bl2.package + +define HOST_ODROIDC2_ATF_BUILD_CMDS + $(MAKE) -C $(@D)/tools/fip_create CC="$(HOSTCC)" CFLAGS="$(HOST_CFLAGS)" LDFLAGS="$(HOST_LDFLAGS)" +endef + +define HOST_ODROIDC2_ATF_INSTALL_CMDS + $(INSTALL) -D -m 0755 $(@D)/tools/fip_create/fip_create $(HOST_DIR)/bin + mkdir -p $(HOST_ODROIDC2_ATF_FIRMWARE_FOLDER) + $(foreach f,$(HOST_ODROIDC2_ATF_FIRMWARE_FILES), + $(INSTALL) -D -m 0644 $(@D)/$(f) $(HOST_ODROIDC2_ATF_FIRMWARE_FOLDER)/ + ) +endef + +$(eval $(host-generic-package))
Signature · 1 line
2.15.1
PATCH v2 3/4 odroidc2: prepare post-image.sh for multi config support
In reply to Dagg Stomplerprepare post-image.sh for support addition of multiple buildroot configs
Signed-off-by Dagg Stompler <[email protected]>
--- board/hardkernel/odroidc2/post-image.sh | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
board/hardkernel/odroidc2/post-image.sh +6 -3
@@ -1,8 +1,11 @@ #!/bin/sh BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +IM_FILE="" + +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +IM_FILE="${BINARIES_DIR}/u-boot.bin" cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
@@ -15,5 +18,5 @@ genimage \ --outputpath "${BINARIES_DIR}" \ --config "${GENIMAGE_CFG}" -dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc -dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc +dd if=${IM_FILE} of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc +dd if=${IM_FILE} of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc
Signature · 1 line
2.15.1
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
In reply to Dagg StomplerSigned-off-by Dagg Stompler <[email protected]>
---
Changes v1 -> v2:
- handle general mail patch rejects (Thomas)
- use BR2_TARGET_UBOOT_BOOT_SCRIPT and BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE instead of script's boot.scr generation (Thomas)
- use defconfig in mainline kernel config (Thomas)
- add patch of mainline kernel diff instead of complete config and use arch default config (Arnout)
- move vendor's ATF handling to a separated patch (Thomas)
- add mainline config support for post image script (Thomas)
- fixed mainline defconfig rejects (Thomas)
- squashed all previous 2-8 patches into one patch (Thomas)
board/hardkernel/odroidc2/boot.cmd | 10 + board/hardkernel/odroidc2/genimage-mainline.cfg | 33 + .../odroidc2/odroidc2_mainline_defconfig | 5657 ++++++++++++++++++++ ...update_arm64_defconfig_with_meson_configs.patch | 642 +++ board/hardkernel/odroidc2/post-build.sh | 12 + board/hardkernel/odroidc2/post-image.sh | 25 +- board/hardkernel/odroidc2/readme.txt | 27 +- configs/odroidc2_mainline_defconfig | 38 + 8 files changed, 6439 insertions(+), 5 deletions(-) create mode 100644 board/hardkernel/odroidc2/boot.cmd create mode 100644 board/hardkernel/odroidc2/genimage-mainline.cfg create mode 100644 board/hardkernel/odroidc2/odroidc2_mainline_defconfig create mode 100644 board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch create mode 100755 board/hardkernel/odroidc2/post-build.sh create mode 100644 configs/odroidc2_mainline_defconfig
board/hardkernel/odroidc2/boot.cmd new file +10 -0
@@ -0,0 +1,10 @@ +setenv loadaddr "0x1080000" +setenv dtb_loadaddr "0x01000000" +setenv kernel_filename "uImage" +setenv fdt_filename "meson-gxbb-odroidc2.dtb" +setenv bootargs "console=ttyAML0,115200n8 earlyprintk root=/dev/mmcblk1p2 rootwait panic=10 ${extra} rw" + +fatload mmc 0:1 ${loadaddr} ${kernel_filename} +fatload mmc 0:1 ${dtb_loadaddr} ${fdt_filename} + +bootm ${loadaddr} - ${dtb_loadaddr}
board/hardkernel/odroidc2/genimage-mainline.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "meson-gxbb-odroidc2.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "uboot-odc2.img" + offset = 49664 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}
board/hardkernel/odroidc2/odroidc2_mainline_defconfig new file +5657 -0
2,957 lines not on this page · raw message
board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch new file +642 -0
642 lines not on this page · raw message
board/hardkernel/odroidc2/post-build.sh new file +12 -0
Lines of this file are not shown. View the raw message.
board/hardkernel/odroidc2/post-image.sh +22 -3
Lines of this file are not shown. View the raw message.
configs/odroidc2_mainline_defconfig new file +38 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.15.1
Part of the diff is not shown here. View the raw message.
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
please ignore board/hardkernel/odroidc2/odroidc2_mainline_defconfig, it was added b mistake, it isn't needed
Quoted 6,566 lines
Sent: Saturday, December 09, 2017 at 9:52 AM
From: "Dagg Stompler" <[email protected]>
To: buildroot at buildroot.org
Subject: [Buildroot] [PATCH v2 4/4] odroidc2: add support for mainline kernel and u-bootSigned-off-by Dagg Stompler <[email protected]>---
Changes v1 -> v2:
- handle general mail patch rejects (Thomas)
- useBR2_TARGET_UBOOT_BOOT_SCRIPTandBR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCEinstead of script's boot.scr generation (Thomas)
- use defconfig in mainline kernel config (Thomas)
- add patch of mainline kernel diff instead of complete config and use arch default config (Arnout)
- move vendor's ATF handling to a separated patch (Thomas)
- add mainline config support for post image script (Thomas)
- fixed mainline defconfig rejects (Thomas)
- squashed all previous 2-8 patches into one patch (Thomas)board/hardkernel/odroidc2/boot.cmd | 10 + board/hardkernel/odroidc2/genimage-mainline.cfg | 33 + .../odroidc2/odroidc2_mainline_defconfig | 5657 ++++++++++++++++++++ ...update_arm64_defconfig_with_meson_configs.patch | 642 +++ board/hardkernel/odroidc2/post-build.sh | 12 + board/hardkernel/odroidc2/post-image.sh | 25 +- board/hardkernel/odroidc2/readme.txt | 27 +- configs/odroidc2_mainline_defconfig | 38 + 8 files changed, 6439 insertions(+), 5 deletions(-) create mode 100644 board/hardkernel/odroidc2/boot.cmd create mode 100644 board/hardkernel/odroidc2/genimage-mainline.cfg create mode 100644 board/hardkernel/odroidc2/odroidc2_mainline_defconfig create mode 100644 board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch create mode 100755 board/hardkernel/odroidc2/post-build.sh create mode 100644 configs/odroidc2_mainline_defconfigboard/hardkernel/odroidc2/boot.cmd new file +10
-0@@ -0,0 +1,10 @@ +setenv loadaddr "0x1080000" +setenv dtb_loadaddr "0x01000000" +setenv kernel_filename "uImage" +setenv fdt_filename "meson-gxbb-odroidc2.dtb" +setenv bootargs "console=ttyAML0,115200n8 earlyprintk root=/dev/mmcblk1p2 rootwait panic=10 ${extra} rw" + +fatload mmc 0:1 ${loadaddr} ${kernel_filename} +fatload mmc 0:1 ${dtb_loadaddr} ${fdt_filename} + +bootm ${loadaddr} - ${dtb_loadaddr}board/hardkernel/odroidc2/genimage-mainline.cfg new file +33
-0@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "meson-gxbb-odroidc2.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "uboot-odc2.img" + offset = 49664 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}board/hardkernel/odroidc2/odroidc2_mainline_defconfig new file +5657
-0@@ -0,0 +1,5657 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.13.1 Kernel Configuration +# +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_NO_IOPORT_MAP=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_HAVE_GENERIC_GUP=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_SMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_RDMA is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_POSIX_TIMERS=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_USERFAULTFD is not set +CONFIG_MEMBARRIER=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y +# CONFIG_PC104 is not set + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLUB_MEMCG_SYSFS_ON is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLAB_MERGE_DEFAULT=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_PROFILING=y +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_THIN_ARCHIVES=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +# CONFIG_HAVE_ARCH_HASH is not set +# CONFIG_ISA_BUS_API is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +# CONFIG_HAVE_ARCH_VMAP_STACK is not set +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +# CONFIG_REFCOUNT_FULL is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +# CONFIG_BLK_WBT is not set +CONFIG_BLK_DEBUG_FS=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_VIRTIO=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +# CONFIG_IOSCHED_BFQ is not set +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=m +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Platform selection +# +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_MEDIATEK is not set +CONFIG_ARCH_MESON=y +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_REALTEK is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_STRATIX10 is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_VULCAN is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZX is not set +# CONFIG_ARCH_ZYNQMP is not set + +# +# Bus support +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCIEASPM_DEFAULT is not set +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCI_LABEL=y + +# +# DesignWare PCI Core Support +# + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_CAVIUM_ERRATUM_30115=y +CONFIG_QCOM_FALKOR_ERRATUM_1003=y +CONFIG_QCOM_FALKOR_ERRATUM_1009=y +CONFIG_QCOM_QDF2400_ERRATUM_0065=y +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_HOTPLUG_CPU=y +# CONFIG_NUMA is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +# CONFIG_ARCH_WANTS_THP_SWAP is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +# CONFIG_ZBUD is not set +CONFIG_Z3FOLD=m +CONFIG_ZSMALLOC=y +CONFIG_PGTABLE_MAPPING=y +# CONFIG_ZSMALLOC_STAT is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +# CONFIG_PERCPU_STATS is not set +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_ARMV8_DEPRECATED is not set +# CONFIG_ARM64_SW_TTBR0_PAN is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_MODULE_CMODEL_LARGE=y +# CONFIG_RANDOMIZE_BASE is not set + +# +# Boot options +# +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_SUSPEND_SKIP_SYNC is not set +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +# CONFIG_ARM_DT_BL_CPUFREQ is not set +# CONFIG_ARM_DB8500_CPUFREQ is not set +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_QORIQ_CPUFREQ=m +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y +CONFIG_NET_INGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +# CONFIG_TLS is not set +CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y +CONFIG_XFRM_ALGO=m +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +CONFIG_NET_FOU=m +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_INET_RAW_DIAG=m +# CONFIG_INET_DIAG_DESTROY is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_TCP_CONG_CDG=m +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_IPV6_ILA=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_FOU=m +# CONFIG_IPV6_FOU_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_IPV6_SEG6_LWTUNNEL=y +CONFIG_IPV6_SEG6_INLINE=y +CONFIG_IPV6_SEG6_HMAC=y +# CONFIG_NETLABEL is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=y +CONFIG_NF_NAT_PROTO_UDPLITE=y +CONFIG_NF_NAT_PROTO_SCTP=y +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NF_TABLES_NETDEV=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_RT=m +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_SET_RBTREE=m +CONFIG_NFT_SET_HASH=m +CONFIG_NFT_SET_BITMAP=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +# CONFIG_NF_DUP_NETDEV is not set +# CONFIG_NFT_DUP_NETDEV is not set +# CONFIG_NFT_FWD_NETDEV is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_IPMAC=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +# CONFIG_IP_VS_FO is not set +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS application helper +# +# CONFIG_IP_VS_FTP is not set +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_SOCKET_IPV4=y +CONFIG_NF_TABLES_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_DUP_IPV4=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_SOCKET_IPV6=y +CONFIG_NF_TABLES_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_DUP_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_NET_DSA=m +CONFIG_NET_DSA_TAG_BRCM=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +CONFIG_NET_DSA_TAG_KSZ=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_DEFAULT_FQ is not set +# CONFIG_DEFAULT_CODEL is not set +# CONFIG_DEFAULT_FQ_CODEL is not set +# CONFIG_DEFAULT_SFQ is not set +CONFIG_DEFAULT_PFIFO_FAST=y +CONFIG_DEFAULT_NET_SCH="pfifo_fast" + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_HSR is not set +CONFIG_NET_SWITCHDEV=y +CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +CONFIG_AX25_DAMA_SLAVE=y +CONFIG_NETROM=m +CONFIG_ROSE=m + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_YAM=m +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +# CONFIG_CAN_VCAN is not set +# CONFIG_CAN_VXCAN is not set +# CONFIG_CAN_SLCAN is not set +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_LEDS is not set +# CONFIG_CAN_GRCAN is not set +# CONFIG_CAN_XILINXCAN is not set +# CONFIG_CAN_C_CAN is not set +# CONFIG_CAN_CC770 is not set +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_SJA1000 is not set +# CONFIG_CAN_SOFTING is not set + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +# CONFIG_CAN_ESD_USB2 is not set +# CONFIG_CAN_GS_USB is not set +# CONFIG_CAN_KVASER_USB is not set +# CONFIG_CAN_PEAK_USB is not set +# CONFIG_CAN_8DEV_USB is not set +# CONFIG_CAN_MCBA_USB is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +# CONFIG_IRLAN is not set +# CONFIG_IRNET is not set +# CONFIG_IRCOMM is not set +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_DEBUGFS is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_RTL=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTUSB_RTL=y +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_SERDEV=y +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_NOKIA is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_BCM is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_ATH3K is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +# CONFIG_STREAM_PARSER is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_NET_9P_XEN=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +# CONFIG_NFC is not set +CONFIG_PSAMPLE=m +CONFIG_NET_IFE=m +CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +# CONFIG_NET_DEVLINK is not set +CONFIG_MAY_USE_DEVLINK=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_GENERIC_ARCH_TOPOLOGY=y + +# +# Bus devices +# +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_BRCMSTB_GISB_ARB is not set +# CONFIG_SIMPLE_PM_BUS is not set +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# Partition parsers +# + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +CONFIG_MTD_MCHP23K256=m +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_MT81xx_NOR is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_MTD_UBI is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_ZRAM=m +# CONFIG_ZRAM_DEBUG is not set +CONFIG_ZRAM_LZ4_COMPRESS=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_VIRTIO_BLK_SCSI is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_NVME_FC is not set +# CONFIG_NVME_TARGET is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_AT25=m +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +CONFIG_EEPROM_IDT_89HPESX=m + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set +# CONFIG_CXL_LIB is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +CONFIG_SCSI_HISI_SAS=y +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_SATA_DWC is not set + +# +# PATA SFF controllers with BMDMA +# + +# +# PIO-only SFF controllers +# +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y + +# +# Generic fallback / legacy drivers +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +# CONFIG_DM_CACHE is not set +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_FEC is not set +# CONFIG_DM_SWITCH is not set +# CONFIG_DM_LOG_WRITES is not set +# CONFIG_DM_INTEGRITY is not set +# CONFIG_TARGET_CORE is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=y +# CONFIG_EQUALIZER is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_IPVTAP=m +CONFIG_VXLAN=m +# CONFIG_GENEVE is not set +CONFIG_GTP=m +CONFIG_MACSEC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_TUN=y +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +CONFIG_NET_VRF=m + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_B53=m +CONFIG_B53_SPI_DRIVER=m +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m +CONFIG_NET_DSA_BCM_SF2=m +# CONFIG_NET_DSA_LOOP is not set +# CONFIG_NET_DSA_MT7530 is not set +CONFIG_NET_DSA_MV88E6060=m +CONFIG_MICROCHIP_KSZ=m +# CONFIG_MICROCHIP_KSZ_SPI_DRIVER is not set +CONFIG_NET_DSA_MV88E6XXX=m +CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y +# CONFIG_NET_DSA_QCA8K is not set +# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set +# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_ALACRITECH=y +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +CONFIG_AMD_XGBE=y +# CONFIG_AMD_XGBE_HAVE_ECC is not set +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_NET_VENDOR_ARC=y +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_MACB_USE_HWSTAMP=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_SYSTEMPORT is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_MVMDIO=m +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NET_VENDOR_8390=y +# CONFIG_ETHOC is not set +CONFIG_NET_VENDOR_QUALCOMM=y +CONFIG_QCA7000=m +CONFIG_QCA7000_SPI=m +# CONFIG_QCA7000_UART is not set +# CONFIG_QCOM_EMAC is not set +CONFIG_NET_VENDOR_RENESAS=y +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=m +CONFIG_DWMAC_DWC_QOS_ETH=m +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_MESON=m +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +CONFIG_DWC_XLGMAC=m +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_BCM_UNIMAC=m +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +CONFIG_MDIO_BUS_MUX_MMIOREG=y +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_OCTEON is not set +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +# CONFIG_LED_TRIGGER_PHY is not set + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AT803X_PHY is not set +CONFIG_BCM7XXX_PHY=m +# CONFIG_BCM87XX_PHY is not set +CONFIG_BCM_NET_PHYLIB=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CORTINA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MARVELL_10G_PHY is not set +CONFIG_MESON_GXL_PHY=m +CONFIG_MICREL_PHY=y +CONFIG_MICROCHIP_PHY=m +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_WLAN=y +# CONFIG_WIRELESS_WDS is not set +CONFIG_WLAN_VENDOR_ADMTEK=y +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_CARL9170_HWRNG is not set +CONFIG_ATH6KL=m +# CONFIG_ATH6KL_SDIO is not set +CONFIG_ATH6KL_USB=m +# CONFIG_ATH6KL_DEBUG is not set +CONFIG_AR5523=m +CONFIG_ATH10K=m +CONFIG_ATH10K_SDIO=m +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_ATH10K_DEBUGFS is not set +CONFIG_WCN36XX=m +# CONFIG_WCN36XX_DEBUGFS is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set +CONFIG_B43_SDIO=y +CONFIG_B43_BCMA_PIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_G=y +CONFIG_B43_PHY_N=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +# CONFIG_BRCMSMAC is not set +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +# CONFIG_BRCMFMAC_USB is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_P54_COMMON is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MWIFIEX is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_WLAN_VENDOR_RALINK=y +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WLAN_VENDOR_REALTEK=y +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_USB=m +CONFIG_RTLWIFI_DEBUG=y +CONFIG_RTL8192C_COMMON=m +CONFIG_RTL8XXXU=m +CONFIG_RTL8XXXU_UNTESTED=y +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +# CONFIG_WL1251_SDIO is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +CONFIG_USB_ZD1201=m +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +CONFIG_RTL8723DU=m +CONFIG_RTL8812AU=m +CONFIG_MAC80211_HWSIM=m +CONFIG_USB_NET_RNDIS_WLAN=m + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_OMAP4 is not set +CONFIG_KEYBOARD_TM2_TOUCHKEY=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CROS_EC is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_SMBUS=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_DECODER is not set +CONFIG_INPUT_CPCAP_PWRBUTTON=m +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_ASPEED_VUART is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +CONFIG_SERIAL_DEV_BUS=m +CONFIG_TTY_PRINTK=m +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_MESON=m +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_GPMUX is not set +CONFIG_I2C_MUX_LTC4306=m +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +# CONFIG_I2C_MUX_MLXCPLD is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_EMEV2 is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MESON=y +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_RK3X=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +CONFIG_SPMI=y +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_PINMUX=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +# CONFIG_PINCTRL_MCP23S08 is not set +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_SINGLE=y +# CONFIG_PINCTRL_SX150X is not set +CONFIG_PINCTRL_MAX77620=y +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +CONFIG_GPIO_DWAPB=y +# CONFIG_GPIO_FTGPIO010 is not set +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_MOCKUP is not set +CONFIG_GPIO_PL061=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_TPIC2810 is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_MAX77620=y + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set + +# +# USB GPIO expanders +# +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2405 is not set +# CONFIG_W1_SLAVE_DS2408 is not set +# CONFIG_W1_SLAVE_DS2413 is not set +# CONFIG_W1_SLAVE_DS2406 is not set +# CONFIG_W1_SLAVE_DS2423 is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2438 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_DS2780 is not set +# CONFIG_W1_SLAVE_DS2781 is not set +# CONFIG_W1_SLAVE_DS28E04 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_AVS is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_BRCMSTB is not set +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +CONFIG_BATTERY_CPCAP=m +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_LEGO_EV3=m +# CONFIG_BATTERY_SBS is not set +CONFIG_CHARGER_SBS=m +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +CONFIG_CHARGER_CPCAP=m +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_LTC3651 is not set +CONFIG_CHARGER_DETECTOR_MAX14656=m +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +CONFIG_SENSORS_ASPEED=m +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +CONFIG_SENSORS_STTS751=m +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_MAX77620_THERMAL is not set +# CONFIG_QORIQ_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +# CONFIG_SSB_DRIVER_GPIO is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y +# CONFIG_BCMA_HOST_SOC is not set +# CONFIG_BCMA_DRIVER_GMAC_CMN is not set +# CONFIG_BCMA_DRIVER_GPIO is not set +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +# CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_CPCAP=m +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +CONFIG_MFD_RK808=y +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +CONFIG_MFD_TI_LMU=m +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TI_LP87565 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_CPCAP=m +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +CONFIG_REGULATOR_LM363X=m +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_RK808=y +# CONFIG_REGULATOR_S2MPA01 is not setLines of this file are not shown. View the raw message.
board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch new file +642
-0Lines of this file are not shown. View the raw message.
board/hardkernel/odroidc2/post-build.sh new file +12
-0Lines of this file are not shown. View the raw message.
board/hardkernel/odroidc2/post-image.sh +22
-3Lines of this file are not shown. View the raw message.
configs/odroidc2_mainline_defconfig new file +38
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 6 lines
2.15.1 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Part of the diff is not shown here. View the raw message.
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
In reply to Dagg StomplerHello,
Quoted 13 lines
Signed-off-by Dagg Stompler <[email protected]>---
Changes v1 -> v2:
- handle general mail patch rejects (Thomas)
- useBR2_TARGET_UBOOT_BOOT_SCRIPTandBR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCEinstead of script's boot.scr generation (Thomas)
- use defconfig in mainline kernel config (Thomas)
- add patch of mainline kernel diff instead of complete config and use arch default config (Arnout)
- move vendor's ATF handling to a separated patch (Thomas)
- add mainline config support for post image script (Thomas)
- fixed mainline defconfig rejects (Thomas)
- squashed all previous 2-8 patches into one patch (Thomas)
Quoted 15 lines
board/hardkernel/odroidc2/boot.cmd | 10 + board/hardkernel/odroidc2/genimage-mainline.cfg | 33 + .../odroidc2/odroidc2_mainline_defconfig | 5657 ++++++++++++++++++++ ...update_arm64_defconfig_with_meson_configs.patch | 642 +++ board/hardkernel/odroidc2/post-build.sh | 12 + board/hardkernel/odroidc2/post-image.sh | 25 +- board/hardkernel/odroidc2/readme.txt | 27 +- configs/odroidc2_mainline_defconfig | 38 + 8 files changed, 6439 insertions(+), 5 deletions(-) create mode 100644 board/hardkernel/odroidc2/boot.cmd create mode 100644 board/hardkernel/odroidc2/genimage-mainline.cfg create mode 100644 board/hardkernel/odroidc2/odroidc2_mainline_defconfig create mode 100644 board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch create mode 100755 board/hardkernel/odroidc2/post-build.sh create mode 100644 configs/odroidc2_mainline_defconfig
Maybe it makes sense to rename odroid-c2 defconfigs (existing and new) adding vendor name: e.g. hardkernel_odroidc2_mainline_defconfig.
...
Quoted 24 lines
board/hardkernel/odroidc2/post-image.sh +10
-3@@ -2,12 +2,29 @@ BOARD_DIR="$(dirname $0)" GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +TARGET_MAINLINE="$2" IM_FILE="" +CLEANUPS_CMD="" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -IM_FILE="${BINARIES_DIR}/u-boot.bin" +if [ "${TARGET_MAINLINE}" = "yes" ]; then + GENIMAGE_CFG="${BOARD_DIR}/genimage-mainline.cfg" + SIGNED_UBOOT_IMG="${BINARIES_DIR}/uboot-odc2.img" + ODRODIDC2_ATF_FOLDER="${HOST_DIR}/usr/share/odroidc2_atf" + IM_FILE="${ODRODIDC2_ATF_FOLDER}/bl1.bin.hardkernel" + CLEANUPS_CMD="rm -rf ${BINARIES_DIR}/fip.bin ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img" -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ + ${HOST_DIR}/bin/fip_create --bl30 ${ODRODIDC2_ATF_FOLDER}/bl30.bin --bl301 ${ODRODIDC2_ATF_FOLDER}/bl301.bin --bl31 ${ODRODIDC2_ATF_FOLDER}/bl31.bin --bl33 ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/fip.bin + ${HOST_DIR}/bin/fip_create --dump ${BINARIES_DIR}/fip.bin
board/hardkernel/odroidc2/post-image.sh line 27
Quoted 10 lines
board/hardkernel/odroidc2/post-image.sh +10
-0+ cat ${ODRODIDC2_ATF_FOLDER}/bl2.package ${BINARIES_DIR}/fip.bin > ${BINARIES_DIR}/boot_new.bin + ${HOST_DIR}/bin/amlbootsig ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img + + dd if=${BINARIES_DIR}/u-boot.img of=${SIGNED_UBOOT_IMG} bs=512 skip=96 +else + GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" + IM_FILE="${BINARIES_DIR}/u-boot.bin" + + cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ +fi
It would be great if boot image generation could be integrated into current ATF/U-Boot dependency model. However from your patches it looks like there is no way to build ATF for odroid-c2 from sources. Could you please clarify several points regarding ATF and different odroid-c2 u-boot flavors. In particular, am I correct assuming the following:
- there is no way to build ATF binaries from sources for odroid-c2 -- ATF binaries are only available in hardkernel u-boot repository
- nothing changes for hardkernel u-boot with these patches:
-- ATF binaries are in the same github repository -- ATF/U-Boot image generation is already in build rules
- mainline u-boot needs ATF binaries from hardkernel u-boot repositories -- mainline u-boot builds fine w/o ATF binaries
-- ATF binaries are needed when signed boot.img is created from u-boot.bin
If so, then could you please check how UBOOT_ZYNQ_IMAGE and UBOOT_CRC_ALTERA_SOCFPGA_IMAGE are now supported in boot/uboot/uboot.mk. It looks like similar approach can be implemented for odroid-c2 mainline u-boot. In this case there will be no need for complicated post-image script. Besides, dependency of mainline u-boot from hardkernel u-boot will be explicitely tracked.
Regards,
Sergey
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
Greetings Sergey,
Quoted 32 lines
Hello,
Quoted 13 lines
Signed-off-by Dagg Stompler <[email protected]>---
Changes v1 -> v2:
- handle general mail patch rejects (Thomas)
- useBR2_TARGET_UBOOT_BOOT_SCRIPTandBR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCEinstead of script's boot.scr generation (Thomas)
- use defconfig in mainline kernel config (Thomas)
- add patch of mainline kernel diff instead of complete config and use arch default config (Arnout)
- move vendor's ATF handling to a separated patch (Thomas)
- add mainline config support for post image script (Thomas)
- fixed mainline defconfig rejects (Thomas)
- squashed all previous 2-8 patches into one patch (Thomas)Quoted 15 lines
board/hardkernel/odroidc2/boot.cmd | 10 + board/hardkernel/odroidc2/genimage-mainline.cfg | 33 + .../odroidc2/odroidc2_mainline_defconfig | 5657 ++++++++++++++++++++ ...update_arm64_defconfig_with_meson_configs.patch | 642 +++ board/hardkernel/odroidc2/post-build.sh | 12 + board/hardkernel/odroidc2/post-image.sh | 25 +- board/hardkernel/odroidc2/readme.txt | 27 +- configs/odroidc2_mainline_defconfig | 38 + 8 files changed, 6439 insertions(+), 5 deletions(-) create mode 100644 board/hardkernel/odroidc2/boot.cmd create mode 100644 board/hardkernel/odroidc2/genimage-mainline.cfg create mode 100644 board/hardkernel/odroidc2/odroidc2_mainline_defconfig create mode 100644 board/hardkernel/odroidc2/patches/linux/0001-update_arm64_defconfig_with_meson_configs.patch create mode 100755 board/hardkernel/odroidc2/post-build.sh create mode 100644 configs/odroidc2_mainline_defconfig
Quoted 2 lines
Maybe it makes sense to rename odroid-c2 defconfigs (existing and new) adding vendor name: e.g.
hardkernel_odroidc2_mainline_defconfig.
can you elaborate on what is the gains of such renaming?
Quoted 44 lines
...
Quoted 24 lines
board/hardkernel/odroidc2/post-image.sh +10
-3@@ -2,12 +2,29 @@ BOARD_DIR="$(dirname $0)" GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +TARGET_MAINLINE="$2" IM_FILE="" +CLEANUPS_CMD="" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -IM_FILE="${BINARIES_DIR}/u-boot.bin" +if [ "${TARGET_MAINLINE}" = "yes" ]; then + GENIMAGE_CFG="${BOARD_DIR}/genimage-mainline.cfg" + SIGNED_UBOOT_IMG="${BINARIES_DIR}/uboot-odc2.img" + ODRODIDC2_ATF_FOLDER="${HOST_DIR}/usr/share/odroidc2_atf" + IM_FILE="${ODRODIDC2_ATF_FOLDER}/bl1.bin.hardkernel" + CLEANUPS_CMD="rm -rf ${BINARIES_DIR}/fip.bin ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img" -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ + ${HOST_DIR}/bin/fip_create --bl30 ${ODRODIDC2_ATF_FOLDER}/bl30.bin --bl301 ${ODRODIDC2_ATF_FOLDER}/bl301.bin --bl31 ${ODRODIDC2_ATF_FOLDER}/bl31.bin --bl33 ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/fip.bin + ${HOST_DIR}/bin/fip_create --dump ${BINARIES_DIR}/fip.binboard/hardkernel/odroidc2/post-image.sh line 27
Quoted 10 lines
board/hardkernel/odroidc2/post-image.sh +10
-0+ cat ${ODRODIDC2_ATF_FOLDER}/bl2.package ${BINARIES_DIR}/fip.bin > ${BINARIES_DIR}/boot_new.bin + ${HOST_DIR}/bin/amlbootsig ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img + + dd if=${BINARIES_DIR}/u-boot.img of=${SIGNED_UBOOT_IMG} bs=512 skip=96 +else + GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" + IM_FILE="${BINARIES_DIR}/u-boot.bin" + + cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ +fiIt would be great if boot image generation could be integrated into current ATF/U-Boot dependency model. However from your patches it looks like there is no way to build ATF for odroid-c2 from sources. Could you please clarify several points regarding ATF and different odroid-c2 u-boot flavors. In particular, am I correct assuming the following:
Quoted 3 lines
- there is no way to build ATF binaries from sources for odroid-c2 -- ATF binaries are only available in hardkernel u-boot repository
I don't quite know, I've asked in the board's forums about this repo: https://github.com/hardkernel/u-boot_firmware/tree/odroidc2-bl301
unfortunately, I did not got clear answer from the moderator (I got an answer but but without any reference to my question). he did referenced me to this: https://wiki.odroid.com/odroid-c2/software/building_u-boot#how_to_build_u-boot_with_bl301_firmware
problem is, it refers to vendor's boot and looking at the page, from what I can see, it needs to be merged into u-boot. another issue is that my git and u-boot knowledge are rather basic...
Quoted 4 lines
- nothing changes for hardkernel u-boot with these patches:
-- ATF binaries are in the same github repository -- ATF/U-Boot image generation is already in build rules
hardkernel u-boot repo includes the ATF injection in it already.
Quoted 3 lines
- mainline u-boot needs ATF binaries from hardkernel u-boot repositories -- mainline u-boot builds fine w/o ATF binaries
-- ATF binaries are needed when signed boot.img is created from u-boot.bin
indeed.
Quoted 10 lines
If so, then could you please check how
UBOOT_ZYNQ_IMAGEandUBOOT_CRC_ALTERA_SOCFPGA_IMAGEare now supported inboot/uboot/uboot.mk. It looks like similar approach can be implemented for odroid-c2 mainline u-boot. In this case there will be no need for complicated post-image script. Besides, dependency of mainline u-boot from hardkernel u-boot will be explicitely tracked.Regards,
Sergey
looks like the might have similar approach, just to be sure it will generate the signed image after u-boot was built, am I correct?
Dagg.
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
Hello Dagg,
Quoted 3 lines
Quoted 2 lines
Maybe it makes sense to rename odroid-c2 defconfigs (existing and new) adding vendor name: e.g.
hardkernel_odroidc2_mainline_defconfig.can you elaborate on what is the gains of such renaming?
More consistent and searchable naming. This is going to make even more sense when other odroid boards will be added. But anyway, this is up to maintainers.
Quoted 72 lines
Quoted 44 lines
...
Quoted 24 lines
board/hardkernel/odroidc2/post-image.sh +10
-3@@ -2,12 +2,29 @@ BOARD_DIR="$(dirname $0)" GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +TARGET_MAINLINE="$2" IM_FILE="" +CLEANUPS_CMD="" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -IM_FILE="${BINARIES_DIR}/u-boot.bin" +if [ "${TARGET_MAINLINE}" = "yes" ]; then + GENIMAGE_CFG="${BOARD_DIR}/genimage-mainline.cfg" + SIGNED_UBOOT_IMG="${BINARIES_DIR}/uboot-odc2.img" + ODRODIDC2_ATF_FOLDER="${HOST_DIR}/usr/share/odroidc2_atf" + IM_FILE="${ODRODIDC2_ATF_FOLDER}/bl1.bin.hardkernel" + CLEANUPS_CMD="rm -rf ${BINARIES_DIR}/fip.bin ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img" -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ + ${HOST_DIR}/bin/fip_create --bl30 ${ODRODIDC2_ATF_FOLDER}/bl30.bin --bl301 ${ODRODIDC2_ATF_FOLDER}/bl301.bin --bl31 ${ODRODIDC2_ATF_FOLDER}/bl31.bin --bl33 ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/fip.bin + ${HOST_DIR}/bin/fip_create --dump ${BINARIES_DIR}/fip.binboard/hardkernel/odroidc2/post-image.sh line 27
Quoted 10 lines
board/hardkernel/odroidc2/post-image.sh +10
-0+ cat ${ODRODIDC2_ATF_FOLDER}/bl2.package ${BINARIES_DIR}/fip.bin > ${BINARIES_DIR}/boot_new.bin + ${HOST_DIR}/bin/amlbootsig ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img + + dd if=${BINARIES_DIR}/u-boot.img of=${SIGNED_UBOOT_IMG} bs=512 skip=96 +else + GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" + IM_FILE="${BINARIES_DIR}/u-boot.bin" + + cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ +fiIt would be great if boot image generation could be integrated into current ATF/U-Boot dependency model. However from your patches it looks like there is no way to build ATF for odroid-c2 from sources. Could you please clarify several points regarding ATF and different odroid-c2 u-boot flavors. In particular, am I correct assuming the following:
Quoted 3 lines
- there is no way to build ATF binaries from sources for odroid-c2 -- ATF binaries are only available in hardkernel u-boot repository
I don't quite know, I've asked in the board's forums about this repo: https://github.com/hardkernel/u-boot_firmware/tree/odroidc2-bl301
unfortunately, I did not got clear answer from the moderator (I got an answer but but without any reference to my question). he did referenced me to this: https://wiki.odroid.com/odroid-c2/software/building_u-boot#how_to_build_u-boot_with_bl301_firmware
problem is, it refers to vendor's boot and looking at the page, from what I can see, it needs to be merged into u-boot. another issue is that my git and u-boot knowledge are rather basic...Quoted 4 lines
- nothing changes for hardkernel u-boot with these patches:
-- ATF binaries are in the same github repository -- ATF/U-Boot image generation is already in build ruleshardkernel u-boot repo includes the ATF injection in it already.
Quoted 3 lines
- mainline u-boot needs ATF binaries from hardkernel u-boot repositories -- mainline u-boot builds fine w/o ATF binaries
-- ATF binaries are needed when signed boot.img is created from u-boot.binindeed.
Quoted 8 lines
If so, then could you please check how
UBOOT_ZYNQ_IMAGEandUBOOT_CRC_ALTERA_SOCFPGA_IMAGEare now supported inboot/uboot/uboot.mk. It looks like similar approach can be implemented for odroid-c2 mainline u-boot. In this case there will be no need for complicated post-image script. Besides, dependency of mainline u-boot from hardkernel u-boot will be explicitely tracked.
Quoted 3 lines
Quoted 2 lines
Regards,
Sergeylooks like the might have similar approach, just to be sure it will generate the signed image after u-boot was built, am I correct?
I did a bit more investigation around hardkernel u-boot and u-boot_firmware repositories. It looks like we need the following pieces in order to create sdcard images using mainline u-boot:
- amlbootsig: a part of meson-tools (you have just added it)
- fip_create: host tool, a part of hardkernel u-boot
- binaries: bl30.bin, bl31.bin, bl301.bin, bl1.bin.hardkernel -- all binaries are a part of hardkernel u-boot repository -- only bl301.bin can be built from sources
-- bl33 will be mainline u-boot
To summarize, it looks like there is no way to use existing ATF package, unless I am missing something. On the other hand, it should be possible to use UBOOT_ZYNQ_IMAGE approach. But in this case we need to pull the whole hardkernel u-boot repository, just to get all binaries and fip_create tool. Wierd...
Maybe it makes sense to wrap the same hardkernel u-boot repository into one more package, e.g. amlogic-binaries. We could use it only for building fip_create and getting binary blobs.
Lets see what others think...
Regards,
Sergey
PATCH v2 4/4 odroidc2: add support for mainline kernel and u-boot
Greetings Sergey,
Quoted 10 lines
Hello Dagg,
Quoted 3 lines
Quoted 2 lines
Maybe it makes sense to rename odroid-c2 defconfigs (existing and new) adding vendor name: e.g.
hardkernel_odroidc2_mainline_defconfig.can you elaborate on what is the gains of such renaming?
More consistent and searchable naming. This is going to make even more sense when other odroid boards will be added. But anyway, this is up to maintainers.
from what I know, the only other board that has any buildroot support is the c1+ in the vendor's buildroot repo. I think your suggestion will be valid if and when a new board will be introduced into buildroot.
Quoted 94 lines
Quoted 73 lines
Quoted 45 lines
...
Quoted 24 lines
board/hardkernel/odroidc2/post-image.sh +10
-3@@ -2,12 +2,29 @@ BOARD_DIR="$(dirname $0)" GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +TARGET_MAINLINE="$2" IM_FILE="" +CLEANUPS_CMD="" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -IM_FILE="${BINARIES_DIR}/u-boot.bin" +if [ "${TARGET_MAINLINE}" = "yes" ]; then + GENIMAGE_CFG="${BOARD_DIR}/genimage-mainline.cfg" + SIGNED_UBOOT_IMG="${BINARIES_DIR}/uboot-odc2.img" + ODRODIDC2_ATF_FOLDER="${HOST_DIR}/usr/share/odroidc2_atf" + IM_FILE="${ODRODIDC2_ATF_FOLDER}/bl1.bin.hardkernel" + CLEANUPS_CMD="rm -rf ${BINARIES_DIR}/fip.bin ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img" -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ + ${HOST_DIR}/bin/fip_create --bl30 ${ODRODIDC2_ATF_FOLDER}/bl30.bin --bl301 ${ODRODIDC2_ATF_FOLDER}/bl301.bin --bl31 ${ODRODIDC2_ATF_FOLDER}/bl31.bin --bl33 ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/fip.bin + ${HOST_DIR}/bin/fip_create --dump ${BINARIES_DIR}/fip.binboard/hardkernel/odroidc2/post-image.sh line 27
Quoted 10 lines
board/hardkernel/odroidc2/post-image.sh +10
-0+ cat ${ODRODIDC2_ATF_FOLDER}/bl2.package ${BINARIES_DIR}/fip.bin > ${BINARIES_DIR}/boot_new.bin + ${HOST_DIR}/bin/amlbootsig ${BINARIES_DIR}/boot_new.bin ${BINARIES_DIR}/u-boot.img + + dd if=${BINARIES_DIR}/u-boot.img of=${SIGNED_UBOOT_IMG} bs=512 skip=96 +else + GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" + IM_FILE="${BINARIES_DIR}/u-boot.bin" + + cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ +fiIt would be great if boot image generation could be integrated into current ATF/U-Boot dependency model. However from your patches it looks like there is no way to build ATF for odroid-c2 from sources. Could you please clarify several points regarding ATF and different odroid-c2 u-boot flavors. In particular, am I correct assuming the following:
Quoted 3 lines
- there is no way to build ATF binaries from sources for odroid-c2 -- ATF binaries are only available in hardkernel u-boot repository
I don't quite know, I've asked in the board's forums about this repo: https://github.com/hardkernel/u-boot_firmware/tree/odroidc2-bl301
unfortunately, I did not got clear answer from the moderator (I got an answer but but without any reference to my question). he did referenced me to this: https://wiki.odroid.com/odroid-c2/software/building_u-boot#how_to_build_u-boot_with_bl301_firmware
problem is, it refers to vendor's boot and looking at the page, from what I can see, it needs to be merged into u-boot. another issue is that my git and u-boot knowledge are rather basic...Quoted 4 lines
- nothing changes for hardkernel u-boot with these patches:
-- ATF binaries are in the same github repository -- ATF/U-Boot image generation is already in build ruleshardkernel u-boot repo includes the ATF injection in it already.
Quoted 3 lines
- mainline u-boot needs ATF binaries from hardkernel u-boot repositories -- mainline u-boot builds fine w/o ATF binaries
-- ATF binaries are needed when signed boot.img is created from u-boot.binindeed.
Quoted 8 lines
If so, then could you please check how
UBOOT_ZYNQ_IMAGEandUBOOT_CRC_ALTERA_SOCFPGA_IMAGEare now supported inboot/uboot/uboot.mk. It looks like similar approach can be implemented for odroid-c2 mainline u-boot. In this case there will be no need for complicated post-image script. Besides, dependency of mainline u-boot from hardkernel u-boot will be explicitely tracked.Quoted 3 lines
Quoted 2 lines
Regards,
Sergeylooks like the might have similar approach, just to be sure it will generate the signed image after u-boot was built, am I correct?
I did a bit more investigation around hardkernel u-boot and u-boot_firmware repositories. It looks like we need the following pieces in order to create sdcard images using mainline u-boot:
- amlbootsig: a part of meson-tools (you have just added it)
-fip_create: host tool, a part of hardkernel u-boot
- binaries: bl30.bin, bl31.bin, bl301.bin, bl1.bin.hardkernel -- all binaries are a part of hardkernel u-boot repository -- only bl301.bin can be built from sources
-- bl33 will be mainline u-bootTo summarize, it looks like there is no way to use existing ATF package, unless I am missing something. On the other hand, it should be possible to use
UBOOT_ZYNQ_IMAGEapproach. But in this case we need to pull the whole hardkernel u-boot repository, just to get all binaries andfip_createtool. Wierd...
Quoted 9 lines
Maybe it makes sense to wrap the same hardkernel u-boot repository into one more package, e.g. amlogic-binaries. We could use it only for building
fip_createand getting binary blobs.Lets see what others think...
Regards,
Sergey
the UBOOT_ZYNQ_IMAGE approach is good if either the ATF code will be moved into the uboot makefile or to an external script that will be called via the uboot makefile.
either way, without been able to compile the ATF, I don't see and better solution. as you said, maybe the others will have a better solution.
Dagg.