Skip to contentSkip to conversation

drm: Update edid-derived drm_display_info fields at edid property set

PATCH In review Keith Packard 3 participants 6 messages Dec 8, 2017 – Dec 13, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm: Update edid-derived drm_display_info fields at edid property set

There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected.

One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property.

Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property.

I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function.

This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths.

The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes.

This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info.

---
 drivers/gpu/drm/drm_connector.c | 13 ++++++++++
 drivers/gpu/drm/drm_edid.c      | 53 ++++++++++++++++++++++++++++++-----------
 include/drm/drm_edid.h          |  2 ++
 3 files changed, 54 insertions(+), 14 deletions(-)
drivers/gpu/drm/drm_connector.c +13 -0
index 25f4b2e9a44f..83c01f359d55 100644
@@ -1207,6 +1207,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 	if (edid)
 		size = EDID_LENGTH * (1 + edid->extensions);
 
+	/* Set the display info, using edid if available, otherwise
+	 * reseting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);
drivers/gpu/drm/drm_edid.c +39 -14

130 lines not on this page · raw message

include/drm/drm_edid.h +2 -0
index b25d12ef120a..8d89a9c3748d 100644
@@ -465,6 +465,8 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 				     struct i2c_adapter *adapter);
 struct edid *drm_edid_duplicate(const struct edid *edid);
+void drm_reset_display_info(struct drm_connector *connector);
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid);
 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
 
 u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
Signature · 6 lines
2.15.0.rc0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Reviewed-by on v1 1/1
#1 lore raw
Quoted 38 lines · Keith Packard

There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected.

One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property.

Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property.

I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function.

This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths.

The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes.

Quoted 5 lines

This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info.

Yeah looks like a good way to reset the desktop-mode in all cases.

Quoted 12 lines
---
 drivers/gpu/drm/drm_connector.c | 13 ++++++++++
 drivers/gpu/drm/drm_edid.c      | 53 ++++++++++++++++++++++++++++++-----------
 include/drm/drm_edid.h          |  2 ++
 3 files changed, 54 insertions(+), 14 deletions(-)
drivers/gpu/drm/drm_connector.c +0 -0
index 25f4b2e9a44f..83c01f359d55 100644
@@ -1207,6 +1207,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 	if (edid)

drivers/gpu/drm/drm_connector.c int drm_mode_connector_update_edid_property(struct drm_connector *connector, · line 1217

Quoted 10 lines
drivers/gpu/drm/drm_connector.c +8 -0
 		size = EDID_LENGTH * (1 + edid->extensions);
 
+	/* Set the display info, using edid if available, otherwise
+	 * reseting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */

Looks like the most reasonable fix for -rc. For the future, maybe capture a FIXME/TODO in this comment that we should look into merging drm_add_edid_modes() and drm_mode_connector_update_edid_property(). I really can't think of a good reason for that split.

Quoted 80 lines
drivers/gpu/drm/drm_connector.c +5 -0
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);
drivers/gpu/drm/drm_edid.c +17 -8
index 524eace3d460..365901c1c33c 100644
@@ -1731,7 +1731,7 @@ EXPORT_SYMBOL(drm_edid_duplicate);
  *
  * Returns true if @vendor is in @edid, false otherwise
  */
-static bool edid_vendor(struct edid *edid, const char *vendor)
+static bool edid_vendor(const struct edid *edid, const char *vendor)
 {
 	char edid_vendor[3];
 
@@ -1749,7 +1749,7 @@ static bool edid_vendor(struct edid *edid, const char *vendor)
  *
  * This tells subsequent routines what fixes they need to apply.
  */
-static u32 edid_get_quirks(struct edid *edid)
+static u32 edid_get_quirks(const struct edid *edid)
 {
 	const struct edid_quirk *quirk;
 	int i;
@@ -2813,7 +2813,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 /*
  * Search EDID for CEA extension block.
  */
-static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
+static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 {
 	u8 *edid_ext = NULL;
 	int i;
@@ -2835,12 +2835,12 @@ static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
 	return edid_ext;
 }
 
-static u8 *drm_find_cea_extension(struct edid *edid)
+static u8 *drm_find_cea_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, CEA_EXT);
 }
 
-static u8 *drm_find_displayid_extension(struct edid *edid)
+static u8 *drm_find_displayid_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, DISPLAYID_EXT);
 }
@@ -4378,7 +4378,7 @@ drm_parse_hdmi_vsdb_video(struct drm_connector *connector, const u8 *db)
 }
 
 static void drm_parse_cea_ext(struct drm_connector *connector,
-			      struct edid *edid)
+			      const struct edid *edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 	const u8 *edid_ext;
@@ -4412,11 +4412,34 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	}
 }
 
-static void drm_add_display_info(struct drm_connector *connector,
-				 struct edid *edid, u32 quirks)
+/* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
+ * all of the values which would have been set from EDID
+ */
+void
+drm_reset_display_info(struct drm_connector *connector)
+{
+	struct drm_display_info *info = &connector->display_info;
+
+	info->width_mm = 0;
+	info->height_mm = 0;
+

drivers/gpu/drm/drm_edid.c static void drm_parse_cea_ext(struct drm_connector *connector, · line 4435

Quoted 10 lines
drivers/gpu/drm/drm_edid.c +10 -0
+	info->bpc = 0;
+	info->color_formats = 0;
+	info->cea_rev = 0;
+	info->max_tmds_clock = 0;
+	info->dvi_dual = false;
+	info->has_hdmi_infoframe = false;
+
+	info->non_desktop = 0;
+}
+EXPORT_SYMBOL_GPL(drm_reset_display_info);

Do we really need these 2 EXPORT_SYMBOL here?

From a quick look the users are only internal to drm.ko, so not needed. And that would gives us a clearer driver api (plus I won't nag you about lack of kerneldoc for said driver api).

If that's correct pls also move the decls to drm_crtc_internal.h. There's already another function exported like that from drm_edid.c.

With the nits addressed:

Please also cc: intel-gfx for v2 so our CI can double-check I didn't miss anything.

Dave's out, but there's some other drm-misc fixes, I'll probably forward a -fixes pull to Linus directly.

Thanks, Daniel

Quoted 79 lines
drivers/gpu/drm/drm_edid.c +12 -6
+
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 
+	u32 quirks = edid_get_quirks(edid);
+
 	info->width_mm = edid->width_cm * 10;
 	info->height_mm = edid->height_cm * 10;
 
@@ -4430,11 +4453,13 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
+	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
+
 	if (edid->revision < 3)
-		return;
+		return quirks;
 
 	if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
-		return;
+		return quirks;
 
 	drm_parse_cea_ext(connector, edid);
 
@@ -4454,7 +4479,7 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	/* Only defined for 1.4 with digital displays */
 	if (edid->revision < 4)
-		return;
+		return quirks;
 
 	switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) {
 	case DRM_EDID_DIGITAL_DEPTH_6:
@@ -4489,7 +4514,9 @@ static void drm_add_display_info(struct drm_connector *connector,
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
 	if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
+	return quirks;
 }
+EXPORT_SYMBOL_GPL(drm_add_display_info);
 
 static int validate_displayid(u8 *displayid, int length, int idx)
 {
@@ -4645,8 +4672,6 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 		return 0;
 	}
 
-	quirks = edid_get_quirks(edid);
-
 	drm_edid_to_eld(connector, edid);
 
 	/*
@@ -4654,7 +4679,7 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 	 * To avoid multiple parsing of same block, lets parse that map
 	 * from sink info, before parsing CEA modes.
 	 */
-	drm_add_display_info(connector, edid, quirks);
+	quirks = drm_add_display_info(connector, edid);
 
 	/*
 	 * EDID spec says modes should be preferred in this order:
include/drm/drm_edid.h +2 -0
index b25d12ef120a..8d89a9c3748d 100644
@@ -465,6 +465,8 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 				     struct i2c_adapter *adapter);
 struct edid *drm_edid_duplicate(const struct edid *edid);
+void drm_reset_display_info(struct drm_connector *connector);
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid);
 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
 
 u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
Signature · 1 line
2.15.0.rc0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

PATCH 1/1 drm: Update edid-derived drm_display_info fields at edid property set [v2]

There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected.

One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property.

Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property.

I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function.

This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths.

The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes.

This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info.

v2: after review by Daniel Vetter <[email protected]>

Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and drm_add_display_info.

Added FIXME in drm_mode_connector_update_edid_property about potentially merging that with drm_add_edid_modes to avoid the need for two driver calls.

---
 drivers/gpu/drm/drm_connector.c | 13 ++++++++++
 drivers/gpu/drm/drm_edid.c      | 53 ++++++++++++++++++++++++++++++-----------
 include/drm/drm_edid.h          |  2 ++
 3 files changed, 54 insertions(+), 14 deletions(-)
drivers/gpu/drm/drm_connector.c +13 -0
index 25f4b2e9a44f..83c01f359d55 100644
@@ -1207,6 +1207,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 	if (edid)
 		size = EDID_LENGTH * (1 + edid->extensions);
 
+	/* Set the display info, using edid if available, otherwise
+	 * reseting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);
drivers/gpu/drm/drm_edid.c +39 -14

130 lines not on this page · raw message

include/drm/drm_edid.h +2 -0
index b25d12ef120a..8d89a9c3748d 100644
@@ -465,6 +465,8 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 				     struct i2c_adapter *adapter);
 struct edid *drm_edid_duplicate(const struct edid *edid);
+void drm_reset_display_info(struct drm_connector *connector);
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid);
 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
 
 u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
Signature · 6 lines
2.15.0.rc0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw

Re: [PATCH] drm: Update edid-derived drm_display_info fields at edid property set [v2]

Quoted 47 lines · Keith Packard

There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected.

One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property.

Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property.

I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function.

This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths.

The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes.

This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info.

v2: after review by Daniel Vetter <[email protected]>

Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and drm_add_display_info.

Quoted 6 lines

Added FIXME in drm_mode_connector_update_edid_property about potentially merging that with drm_add_edid_modes to avoid the need for two driver calls.

Ok there's a functional conflict when I tried to apply this to -fixes, due to some rework already in drm-misc-next. Hence I applied your original patch here to drm-misc-next, and then cherry-picked it over to drm-misc-fixes and fixed it up. That way we'll not loose the bits needed in -next.

Please double-check I didn't wreck stuff before I send the pull request out.

Thanks, Daniel

Quoted 191 lines
---
 drivers/gpu/drm/drm_connector.c | 13 ++++++++++
 drivers/gpu/drm/drm_edid.c      | 53 ++++++++++++++++++++++++++++++-----------
 include/drm/drm_edid.h          |  2 ++
 3 files changed, 54 insertions(+), 14 deletions(-)
drivers/gpu/drm/drm_connector.c +13 -0
index 25f4b2e9a44f..83c01f359d55 100644
@@ -1207,6 +1207,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 	if (edid)
 		size = EDID_LENGTH * (1 + edid->extensions);
 
+	/* Set the display info, using edid if available, otherwise
+	 * reseting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);
drivers/gpu/drm/drm_edid.c +39 -14
index 524eace3d460..365901c1c33c 100644
@@ -1731,7 +1731,7 @@ EXPORT_SYMBOL(drm_edid_duplicate);
  *
  * Returns true if @vendor is in @edid, false otherwise
  */
-static bool edid_vendor(struct edid *edid, const char *vendor)
+static bool edid_vendor(const struct edid *edid, const char *vendor)
 {
 	char edid_vendor[3];
 
@@ -1749,7 +1749,7 @@ static bool edid_vendor(struct edid *edid, const char *vendor)
  *
  * This tells subsequent routines what fixes they need to apply.
  */
-static u32 edid_get_quirks(struct edid *edid)
+static u32 edid_get_quirks(const struct edid *edid)
 {
 	const struct edid_quirk *quirk;
 	int i;
@@ -2813,7 +2813,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 /*
  * Search EDID for CEA extension block.
  */
-static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
+static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 {
 	u8 *edid_ext = NULL;
 	int i;
@@ -2835,12 +2835,12 @@ static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
 	return edid_ext;
 }
 
-static u8 *drm_find_cea_extension(struct edid *edid)
+static u8 *drm_find_cea_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, CEA_EXT);
 }
 
-static u8 *drm_find_displayid_extension(struct edid *edid)
+static u8 *drm_find_displayid_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, DISPLAYID_EXT);
 }
@@ -4378,7 +4378,7 @@ drm_parse_hdmi_vsdb_video(struct drm_connector *connector, const u8 *db)
 }
 
 static void drm_parse_cea_ext(struct drm_connector *connector,
-			      struct edid *edid)
+			      const struct edid *edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 	const u8 *edid_ext;
@@ -4412,11 +4412,34 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	}
 }
 
-static void drm_add_display_info(struct drm_connector *connector,
-				 struct edid *edid, u32 quirks)
+/* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
+ * all of the values which would have been set from EDID
+ */
+void
+drm_reset_display_info(struct drm_connector *connector)
+{
+	struct drm_display_info *info = &connector->display_info;
+
+	info->width_mm = 0;
+	info->height_mm = 0;
+
+	info->bpc = 0;
+	info->color_formats = 0;
+	info->cea_rev = 0;
+	info->max_tmds_clock = 0;
+	info->dvi_dual = false;
+	info->has_hdmi_infoframe = false;
+
+	info->non_desktop = 0;
+}
+EXPORT_SYMBOL_GPL(drm_reset_display_info);
+
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 
+	u32 quirks = edid_get_quirks(edid);
+
 	info->width_mm = edid->width_cm * 10;
 	info->height_mm = edid->height_cm * 10;
 
@@ -4430,11 +4453,13 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
+	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
+
 	if (edid->revision < 3)
-		return;
+		return quirks;
 
 	if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
-		return;
+		return quirks;
 
 	drm_parse_cea_ext(connector, edid);
 
@@ -4454,7 +4479,7 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	/* Only defined for 1.4 with digital displays */
 	if (edid->revision < 4)
-		return;
+		return quirks;
 
 	switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) {
 	case DRM_EDID_DIGITAL_DEPTH_6:
@@ -4489,7 +4514,9 @@ static void drm_add_display_info(struct drm_connector *connector,
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
 	if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
+	return quirks;
 }
+EXPORT_SYMBOL_GPL(drm_add_display_info);
 
 static int validate_displayid(u8 *displayid, int length, int idx)
 {
@@ -4645,8 +4672,6 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 		return 0;
 	}
 
-	quirks = edid_get_quirks(edid);
-
 	drm_edid_to_eld(connector, edid);
 
 	/*
@@ -4654,7 +4679,7 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 	 * To avoid multiple parsing of same block, lets parse that map
 	 * from sink info, before parsing CEA modes.
 	 */
-	drm_add_display_info(connector, edid, quirks);
+	quirks = drm_add_display_info(connector, edid);
 
 	/*
 	 * EDID spec says modes should be preferred in this order:
include/drm/drm_edid.h +2 -0
index b25d12ef120a..8d89a9c3748d 100644
@@ -465,6 +465,8 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 				     struct i2c_adapter *adapter);
 struct edid *drm_edid_duplicate(const struct edid *edid);
+void drm_reset_display_info(struct drm_connector *connector);
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid);
 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
 
 u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
Signature · 1 line
2.15.0.rc0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

✓ Fi.CI.BAT: success for drm: Update edid-derived drm_display_info fields at edid property set [v2]

In reply to Keith Packard
== Series Details ==

== Series Details ==

Series: drm: Update edid-derived drm_display_info fields at edid property set [v2]
URL : https://patchwork.freedesktop.org/series/35271/
State : success

== Summary ==

Series 35271v1 drm: Update edid-derived drm_display_info fields at edid property set [v2]
https://patchwork.freedesktop.org/api/1.0/series/35271/revisions/1/mbox/

Test gem_mmap_gtt:

        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                pass       -> DMESG-WARN (fi-kbl-r) fdo#104172 +1

fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104172 https://bugs.freedesktop.org/show_bug.cgi?id=104172

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:437s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:441s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:385s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:508s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:277s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:504s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:505s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:489s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:473s
fi-elk-e7500     total:224  pass:163  dwarn:15  dfail:0   fail:0   skip:45 
fi-gdg-551       total:288  pass:178  dwarn:1   dfail:0   fail:1   skip:108 time:269s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:541s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:353s
fi-hsw-4770r     total:288  pass:224  dwarn:0   dfail:0   fail:0   skip:64  time:260s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:390s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:468s
fi-ivb-3770      total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:444s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:487s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:527s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:474s
fi-kbl-r         total:288  pass:260  dwarn:1   dfail:0   fail:0   skip:27  time:526s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:590s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:448s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:543s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:562s
fi-skl-6700k     total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:517s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:495s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:440s
fi-snb-2520m     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:541s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:415s
Blacklisted hosts:
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:599s
fi-cnl-y         total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:612s
fi-glk-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:492s

8874c0f95698c533c0daf69c6c41834d837fef87 drm-tip: 2017y-12m-12d-21h-34m-33s UTC integration manifest 7fe02ab8e97e drm: Update edid-derived drm_display_info fields at edid property set [v2]

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7479/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✓ Fi.CI.IGT: success for drm: Update edid-derived drm_display_info fields at edid property set [v2]

In reply to Keith Packard
== Series Details ==

== Series Details ==

Series: drm: Update edid-derived drm_display_info fields at edid property set [v2]
URL : https://patchwork.freedesktop.org/series/35271/
State : success

== Summary ==

Test gem_pwrite:

        Subgroup huge-gtt-backwards:
                incomplete -> PASS       (shard-hsw) fdo#104218
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-primscrn-spr-indfb-fullscreen:
                pass       -> FAIL       (shard-hsw) fdo#101623
Test kms_flip:
        Subgroup plain-flip-fb-recreate-interruptible:
                pass       -> FAIL       (shard-hsw) fdo#100368

fdo#104218 https://bugs.freedesktop.org/show_bug.cgi?id=104218
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368

shard-hsw        total:2712 pass:1535 dwarn:1   dfail:0   fail:12  skip:1164 time:9449s
shard-snb        total:2681 pass:1291 dwarn:1   dfail:0   fail:11  skip:1377 time:7760s
Blacklisted hosts:
shard-apl        total:2712 pass:1687 dwarn:2   dfail:0   fail:21  skip:1001 time:13870s
shard-kbl        total:2712 pass:1811 dwarn:1   dfail:0   fail:24  skip:876 time:11054s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7479/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx