Skip to contentSkip to conversation

i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events

PATCH New Alice Michael 2 participants 2 messages Dec 18, 2017 – Dec 22, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 9/9 i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events

From: Shiraz Saleem <[email protected]>

Client close is overloaded to handle both un-registration and netdev down event. On netdev down, i40iw client close is called which unregisters the RDMA dev and and this is too destructive since the netdev is still registered.

Do not call client close/open on netdev down/up events. Instead disable the PE TCP_ENA flag during a netdev down event. This blocks all TCP traffic to the RDMA Protocol Engine. On netdev up, re-enable the flag.

---
 drivers/net/ethernet/intel/i40e/i40e_client.c | 36 ++++++++++++++-------------
 drivers/net/ethernet/intel/i40e/i40e_client.h |  2 +-
 2 files changed, 20 insertions(+), 18 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_client.c +19 -17
index 1b1e2ac..0de9610 100644
@@ -378,11 +378,11 @@ void i40e_client_subtask(struct i40e_pf *pf)
 	if (!client || !cdev)
 		return;
 
-	/* Here we handle client opens. If the client is down, but
-	 * the netdev is up, then open the client.
+	/* Here we handle client opens. If the client is down, and
+	 * the netdev is registered, then open the client.
 	 */
 	if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) {
-		if (!test_bit(__I40E_VSI_DOWN, vsi->state) &&
+		if (vsi->netdev_registered &&
 		    client->ops && client->ops->open) {
 			set_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state);
 			ret = client->ops->open(&cdev->lan_info, client);
@@ -393,17 +393,19 @@ void i40e_client_subtask(struct i40e_pf *pf)
 				i40e_client_del_instance(pf);
 			}
 		}
-	} else {
-	/* Likewise for client close. If the client is up, but the netdev
-	 * is down, then close the client.
-	 */
-		if (test_bit(__I40E_VSI_DOWN, vsi->state) &&
-		    client->ops && client->ops->close) {
-			clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state);
-			client->ops->close(&cdev->lan_info, client, false);
-			i40e_client_release_qvlist(&cdev->lan_info);
-		}
 	}
+
+	/* enable/disable PE TCP_ENA flag based on netdev down/up
+	 */
+	if (test_bit(__I40E_VSI_DOWN, vsi->state))
+		i40e_client_update_vsi_ctxt(&cdev->lan_info, client,
+					    0, 0, 0,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE);
+	else
+		i40e_client_update_vsi_ctxt(&cdev->lan_info, client,
+					    0, 0,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE);
 }
 
 /**
@@ -717,13 +719,13 @@ static int i40e_client_update_vsi_ctxt(struct i40e_info *ldev,
 		return -ENOENT;
 	}
 
-	if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE) &&
-	    (flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE)) {
+	if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) &&
+	    (flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) {
 		ctxt.info.valid_sections =
 			cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID);
 		ctxt.info.queueing_opt_flags |= I40E_AQ_VSI_QUE_OPT_TCP_ENA;
-	} else if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE) &&
-		  !(flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE)) {
+	} else if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) &&
+		  !(flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) {
 		ctxt.info.valid_sections =
 			cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID);
 		ctxt.info.queueing_opt_flags &= ~I40E_AQ_VSI_QUE_OPT_TCP_ENA;
drivers/net/ethernet/intel/i40e/i40e_client.h +1 -1
index 15b21a5..ba55c88 100644
@@ -132,7 +132,7 @@ struct i40e_info {
 
 #define I40E_CLIENT_RESET_LEVEL_PF   1
 #define I40E_CLIENT_RESET_LEVEL_CORE 2
-#define I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE  BIT(1)
+#define I40E_CLIENT_VSI_FLAG_TCP_ENABLE  BIT(1)
 
 struct i40e_ops {
 	/* setup_q_vector_list enables queues with a particular vector */
Signature · 1 line
2.9.5
#1 lore raw

PATCH 9/9 i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events

Quoted 20 lines

-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On Behalf Of Alice Michael
Sent: Monday, December 18, 2017 2:18 AM
To: Michael, Alice <[email protected]>; intel-wired-
lan at lists.osuosl.org
Cc: Saleem, Shiraz <[email protected]>
Subject: [Intel-wired-lan] [next PATCH S83-V5 9/9] i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events

From: Shiraz Saleem <[email protected]>

Client close is overloaded to handle both un-registration and netdev down event. On netdev down, i40iw client close is called which unregisters the RDMA dev and and this is too destructive since the netdev is still registered.

Do not call client close/open on netdev down/up events. Instead disable the PE TCP_ENA flag during a netdev down event. This blocks all TCP traffic to the RDMA Protocol Engine. On netdev up, re-enable the flag.

Quoted 5 lines
---
 drivers/net/ethernet/intel/i40e/i40e_client.c | 36 ++++++++++++++---------
----  drivers/net/ethernet/intel/i40e/i40e_client.h |  2 +-
 2 files changed, 20 insertions(+), 18 deletions(-)