Accelerated read from WC mem (i915_memcpy_from_wc()) may not work in virtualization world
Hi Chris,
Our QA reported a problem caused by movntdqa instructions. Currently, the KVM hypervisor doesn't support VEX-prefix instructions emulation. If users passthrough a GPU to guest with vfio option 'x-no-mmap=on', then all access to the BARs will be trapped and emulated. The KVM hypervisor would raise an inertal error to qemu which cause the guest killed. (Since 'movntdqa' ins is not supported.)
One possible solution is that disable this optimization at i915_memcpy_init_early. This require us to identify the CPUID to check if it is running in guest mode.
What do you think? Thanks.
Signature · 6 lines
Thanks, Changbin Du _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Du, Changbin (2017-12-21 09:52:16)
Quoted 9 lines
Hi Chris,
Our QA reported a problem caused by movntdqa instructions. Currently, the KVM hypervisor doesn't support VEX-prefix instructions emulation. If users passthrough a GPU to guest with vfio option 'x-no-mmap=on', then all access to the BARs will be trapped and emulated. The KVM hypervisor would raise an inertal error to qemu which cause the guest killed. (Since 'movntdqa' ins is not supported.)One possible solution is that disable this optimization at
i915_memcpy_init_early. This require us to identify the CPUID to check if it is running in guest mode.
Is this mode not detected by intel_vgpu_active() ?
If we need to disable movntdqa, we need to disable it. But not by directly checking CPUID, it should be already decoded into a cpu feature flag -- assuming we need more than intel_vgpu_active and possibly rearranging the init order.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Chris Wilson
Quoting Du, Changbin (2017-12-21 09:52:16)
Quoted 7 lines
Hi Chris,
Our QA reported a problem caused by movntdqa instructions. Currently, the KVM hypervisor doesn't support VEX-prefix instructions emulation. If users passthrough a GPU to guest with vfio option 'x-no-mmap=on', then all access to the BARs will be trapped and emulated. The KVM hypervisor would raise an inertal error to qemu which cause the guest killed. (Since 'movntdqa' ins is not supported.)
Quoted 5 lines
Quoted 2 lines
One possible solution is that disable this optimization at
i915_memcpy_init_early. This require us to identify the CPUID to check if it is running in guest mode.Is this mode not detected by
intel_vgpu_active()?
Here intel_vgpu_active() is not ready to use. i915_memcpy_init_early is executed before MMIO mapped.
Quoted 5 lines
If we need to disable movntdqa, we need to disable it. But not by directly checking CPUID, it should be already decoded into a cpu feature flag -- assuming we need more than
intel_vgpu_activeand possibly rearranging the init order.
-Chris
Yes, for Intel CPU, Bit 31 of ECX of CPUID leaf 0x1 is Hypervisor Present Bit. So I will write a patch to disable it in hypervisor guest if you don't have objections. Thanks.
Signature · 6 lines
Thanks, Changbin Du _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Du, Changbin (2017-12-21 09:52:16)
Quoted 9 lines
Hi Chris,
Our QA reported a problem caused by movntdqa instructions. Currently, the KVM hypervisor doesn't support VEX-prefix instructions emulation. If users passthrough a GPU to guest with vfio option 'x-no-mmap=on', then all access to the BARs will be trapped and emulated. The KVM hypervisor would raise an inertal error to qemu which cause the guest killed. (Since 'movntdqa' ins is not supported.)One possible solution is that disable this optimization at
i915_memcpy_init_early. This require us to identify the CPUID to check if it is running in guest mode.
But do note we are already checking the CPUID/cpuflags for support; is the hv not correcting them?
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Chris Wilson
Quoting Du, Changbin (2017-12-21 09:52:16)
Quoted 7 lines
Hi Chris,
Our QA reported a problem caused by movntdqa instructions. Currently, the KVM hypervisor doesn't support VEX-prefix instructions emulation. If users passthrough a GPU to guest with vfio option 'x-no-mmap=on', then all access to the BARs will be trapped and emulated. The KVM hypervisor would raise an inertal error to qemu which cause the guest killed. (Since 'movntdqa' ins is not supported.)
Quoted 6 lines
Quoted 2 lines
One possible solution is that disable this optimization at
i915_memcpy_init_early. This require us to identify the CPUID to check if it is running in guest mode.But do note we are already checking the CPUID/cpuflags for support; is the hv not correcting them?
-Chris
The CPU does support SSE, but just the KVM ins emulator doesn't. So it is not a problem if the movntdqa runs on HW directly. But if it is emulated, then run into failure.
Signature · 6 lines
Thanks, Changbin Du _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx